Construction of Civil Hospital (New Block) 70 Nos. Bedded Building at Nagrota Bagwan in Distt Kangra (Himachal Pradesh) (Deposit Work) (SH-Construction of Civil work includes water supply and Sanitary Installation, Rain Water harvesting system etce

Amount

Excavation in foundation, trenches etcetera. in earth work in all classification of soil such as pick work, jumper work, pick jumper work, blasting work, jumper blasting work, soft and hard blasting and saturated soil, de-watering, including wedging out rocks where blasting work is prohibited, chiseling or any other mixed variety of soil, shoring, strutting or bailing out water (Surface and sub soil water) upto any depth or height any quantum of water including de-watering removal of slush, lift upto any height, stacking the excavated soil clear from the edge of excavation and then retuning the stacked soil in 15cm (Fifteen centimetre) layers, when required into plinths, sides of foundation etcetera; consolidating each deposited layer by ramming, watering and then disposing of all surplus excavated earth as directed by the Engineer-in-charge, within all leads, lifts and other incidentals as per specifications, approved drawing, design. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Cutting in earth work in all classification of soil such as Pick work, Jumper work, pick Jumper work, blasting work, hard and soft rock conglomerate rocks chiesling or wedging out rock where blasting is prohibited or any other variety of soil including removal of bushes etcetera including de-watering and proping or bailing out water (Surface and sub-soil water) upto any layers/depths or any quantum of water including slush which may raised during dewatering complete including filling of mud depressions where required including stacking the servicable materials and disposal of unservicable materials as per specifications, approval drawings, design as per the entire satisfaction of and direction of Engineer-in-Charge including carriage of materal within all leads, lifts and other incidentals as per specifications, approved drawing, design. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Excavation in earth work and filling in 15 cm (Fifteen Centimetres) layers in foundation and plinths including ramming, watering and consolidating upto all leads, lifts and then pick work as directed by the Engineer-in-charge, within all leads, lifts and other incidentals as per specifications, approved drawing, design. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Excavation in drains and channels etcetera; in earth work in all kind of soil, such as pick work, jumper work, pick jumper work, blasting work, hard and soft blasting and work doing in saturated soil including chiseling or wedging out rocks where blasting work is prohibited including shoring, strutting and pumping or bailing out water (Surface and sub soil water) upto any depth or any height any quantum of water including slush which may arrise during dewatering any other mixed variety of soil, lift upto any height, stacking the excavated soil for all heights from the edge of excavation and then returning the stacked soil in 15cm (Fifteen centimetre) layer when required into plinths, sides of foundations etcetera; consolidating each deposited layer by ramming, watering and then disposing of all surplus excavated earth as per specifications, approved drawing, design, specification and as per the entire satisfaction of the Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Stone filling in plinth dry hand packed with hard stone of approved quality under floor including watering, ramming, consolidating and dressing complete as per specifications, approved drawing, design as per entire satisfactions and direction of Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing form work with steel plates of 3.15mm (Three decimal one five millimetre) thick, welded with angle iron in frames of 30x30x5mm (Thirty into Thirty into Five millimetre), so as to give a fair finish including centring, shuttering strutting and propping etcetera, with wooden battens and ballies for all heights/depth of propping and centring below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in Foundation footings, bases of columns and mass concrete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design, entire satisfaction and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing form work with steel plates of 3.15mm (Three decimal one five millimetre) thick, welded with angle iron in frames of 30x30x5mm (Thirty into Thirty into Five millimetre), so as to give a fair finish including centring, shuttering strutting and propping etcetera, with wooden battens and ballies for all heights/depth of propping and centring below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in flat surfaces such as soffits of suspended floors roofs, landings and the like as per Architectural drawing, design and specifications including carriage of material within all leads, lifts and other incidentals and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing form work with steel plates of 3.15mm (Three decimal one five millimetre) thick, welded with angle iron in frames of 30x30x5mm (Thirty into Thirty into Five millimetre), so as to give a fair finish including centring, shuttering strutting and propping etcetera; with wooden battens and ballies for all heights/depths of propping and centring below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in beams, cantilevers, girders, lintels where ever required sides and soffits of beams haunchings cantilevers bressumers and lintels upto all depths including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design, specifications, entire satisfaction and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing form work with steel plates of 3.15mm (Three decimal one five millimetre) thick, welded with angle iron in frames of 30x30x5mm (Thirty into Thirty into Five millimetre), so as to give a fair finish including centring, shuttering strutting and propping etcetera, with wooden battens and ballies for all heights/depths of propping and centring below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in columns, pillar, posts and struts square rectangular polygonal in plan including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing form work with steel plates of 3.15mm (Three decimal fifteen millimetre) thick, welded with angle iron in frames of 30x30x5mm(Thirty into Thirty into Five millimetre),so as to give a fair finish including centring, shuttering strutting and propping etc, with wooden battens and ballies for all heights and removal of the same for in-situ reinforced plain concrete work in vertical fins and vertical sun breakers complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing form work with steel plates of 3.15mm (Three decimal fifteen millimetre) thick, welded with angle iron in frames of 30x30x5mm(Thirty into Thirty into Five millimetre),so as to give a fair finish including centring, shuttering strutting and propping etcetera, with wooden battens and ballies for all heights and removal of the same for in-situ reinforced plain concrete work in stairs cases with slopping or stepped soffits, excluding, landing, including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing form work with steel plates of 3.15mm (Three decimal fifteen millimetre) thick, welded with angle iron in frames of 30x30x5mm (Thirty into Thirty into Five millimetre), so as to give a fair finish including centring, shuttering strutting and propping etcetera, with wooden battens and ballies for all heights and removal of the same for in-situ reinforced plain concrete work in edges of slab and breaks in floors and walls under any thickness including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design, specifications and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing form work with steel plates of 3.15mm (Three decimal fifteen millimeters)thick, welded with angle iron in frames of 30x30x5mm(Thirty into Thirty into Five millimeters),so as to give a fair finish including centring, shuttering strutting and propping etcetera, with wooden battens and ballies for all heights and removal of the same for in-situ reinforced concrete and plain concrete work in vertical surface such as walls(any thickness) partitions and the like including attached, pilasters, buttresses, plinth and string courses and the like including entire carriage of materials within all leads, lifts and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge.The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and laying cement concrete 1:4:8 (One cement; four sand; eight graded crushed stone aggregate 40mm (Forty millimetre) nominal size mechanically mixed and curing complete excluding cost of forms work in foundation and plinth including entire carriage of materials within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and laying cement concrete 1:6:12 (One cement : Six sand : Twelve graded broken/crushed stone aggregate 40mm (Forty millimetre) nominal size mechanically mixed and curing complete excluding cost of forms work centring, shuttering in foundation and plinth including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design, and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and laying cement concrete 1:2:4 (One cement : two sand : Four graded broken/crushed stone aggregate 40mm (Forty millimetre) nominal size mechanically mixed and curing complete excluding cost of forms work centring, shuttering in foundation and plinth including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design, and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and laying cement concrete work of grade M-20 (M- twenty) mix design to obtain the minimum crushing strength of 20N/mm2 (Twenty Newton per square millimetre) with cement contents not less than 330 kg (Three hundred thirty kilogram) per cubic meter to give an smooth surfaces mechanically mixed and vibrated including curing complete, excluding the cost of form work and reinforcement for reinforced concrete work in foundation, footings, bases of columns and the like mass concrete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and laying cement concrete work of grade M-20 (M-Twenty) design mix to obtain the minimum comressive strength of 20N/mm2 (Twenty Newton per square millimetre) with cement contents not less than 320 kg (Three hundred twenty kilogram) per cubic metre, mechanically mixed and vibrated including curing complete, excluding cost of form work and reinforcement for reinforced concrete work in suspended floors, roofs, landings, shelves and their supports balconies, beams, girder, bressumers and cantilevers in all depths/thickness upto all floor level as per specifications, approved drawing, design as per entire satisfaction and direction of Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and laying cement concrete work of grade M-20 (M-Twenty) design mix to obtain the minimum compressive strength of 20N/mm2 (Twenty Newton per square millimetre) with cement contents not less than 320 kg (Three hundred twenty kilogram) per cubic meter mechanically mixed and vibrated including curing complete, excluding cost of form work and reinforcement for reinforced concrete work in columns, pillars posts and struts in all depth/thickness for all floors heights as per specifications, approved drawing, design including carriage of material within all leads, lifts and other incidentals and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and laying cement concrete work of grade M-20 (M- twenty) mix design to obtain the minimum compressive strength of 20N/mm2 (Twenty Newton per square millimetre) with cement contents not less than 320 Kgs (Three hundred twenty kilogram) per cubic meter, mechanically mixed and vibrated including curing complete, excluding cost of form work and reinforcement for reinforced concrete work in walls any thickness partitions and the like including attached pilasters, buttresses, plinth and string courses as per specifications, approved drawing, design including carriage of material within all leads, lifts and other incidentals and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and laying cement concrete work of grade M-20 (M- twenty) design mix to obtain the minimum compressive strength of 20N/mm2 (Twenty Newton per square millimetre) with cement contents not less than 320 kg (Three hundred twenty kilogram) per cubic metre, mechanically mixed and vibrated including curing complete, excluding cost of form work and reinforcement for reinforced concrete work in vertical and horizontal walls/fins (thickness not more than 0.10m) (Zero point one zero metre) including attached pilasterd buttersses plinth and string courses etcetera from top of foundation individually or forming box louvers and projected band upto all floor level as per specifications, approved drawing, design including carriage of material within all leads, lifts and other incidentals and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and laying cement concrete work of grade M-20 (M- twenty) design mix to obtain the minimum compressive strength of 20N/mm2 (Twenty Newton per square millimetre) with cement contents not less than 320 kg (Three hundred twenty kilogram) per cubic metre mechanically mixed and vibrated including curing complete, excluding cost of form work and reinforcement for reinforced concrete work in Stair cases (except spiral stair cases) excluding landings, but including preparing of top surfaces and finishing of nosing upto all floor levels as per specifications, approved drawing, design including carriage of material within all heights leads, lifts and other incidentals and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and laying cement concrete work of grade M-20 (M-twenty) design mix to obtain the minimum compressive strength of 20N/mm2 (Twenty Newton per square millimetre) with cement contents not less than 320 kg (Three hundred twenty kilogram) per cubic meter, mechanically mixed, vibrated and curing complete for reinforced concrete in Chhajjas for all thickness in all floor levels up to all heights including finishing the exposed surface with cement mortar 1:3 (One cement : Three sand) to give a smooth and even surface including centering/ form work but excluding the cost of reinforcement for reinforced concrete work up to all floor levels up to all height as per direction of Engineer-in-charge including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and specifications. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and laying cement concrete work M-20 (M-twenty) design mix to obtain the minimum compressive strength of 20N/mm2 (Twenty Newton per square millimetre) with cement contents not less than 320 Kgs (Three hundred twenty kilogram) per cubic metre mechanically mixed and vibrated to give smooth and even surfaces including centring, shuttering but excluding the cost of reinforcement in mouldings, cornices, windows sills etcetera to any girth, as per specifications, drawing and design complete, as directed by the Engineer-in-charge, upto floor all levels including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and laying Tor steel reinforcement of TATA/Tisco/Sail for reinforced cement concrete work including bending, binding, cutting, straightening and placing in position complete including cost of binding wires complete upto all floor levels as per specifications, approved drawing, design, as per entire satisfaction of the Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Random rubble masonry coursed with hard stone of approved quality in foundation and plinth including raking out joints in cement mortar 1:6 (One cement : Six sand) and curing complete within all heights leads, lifts of materials and other incidentals, as per specifications, approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and laying autoclaved aerated cement blocks masonry AAC blocks in super structure above plinth level up to floor V level in cement mortar 1:4 (One cement : four coarse sand ). The rate includes providing and placing in position 2 (Two) Nos 6 (Six) mm dia M.S. bars at every third course of masonry work including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Second class Half brick work using common burnt clay building bricks in super-structure upto all floor level in cement mortar 1:4 (One cement: Four sand) curing complete within all heights leads, lifts of material and other incidentals, as per specifications, approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 12mm (Twelve millimetre) thick prelaminated board both side bwp phenol bonded exterior/interior grade for infill panel of doors ISI marked IS NO. 12823 of Action/TESA/Greenlam/Marinolam/Kishan of approved shade with necessary screws with 40 mm (forty millimetre thick frame. as per specifications, drawings design complete including carriage of material within all leads, lifts and other incidentals and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing glass panes of 6 mm (Six millimetre) thickness of Modi/Saint Gobin (weight not less than 13.75 kg/sqm (Thirteen point seventy five kilgrams/square metre) in aluminium door, window, ventilator shutters and partition etcetera with PVC/neoprens gasket complete as per the architectural drawings, design and specifications including carriage of material within all leads, lifts and other incidentals and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing glazing with frosted glass panes of 4 mm (Four millimetre) thickness of ModiGaurd/Saint Gobin (weight not less than 10 kg/sqm (Ten kilgrams/square metre) in aluminium window/ ventilator shutters to toilet with PVC/neoprens gasket etcetera complete as per the architectural drawings, design, specifications including carriage of material within all leads, lifts and other incidentals and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 19mm (Nineteen milimetres) thick water proof commercial board in SDB/MDB shutter of Centuary/Alpro ply. All cut portions of the board shall have 6mm (Six millimetre) thick hard wood edging and 0.63 mm thick P.G.I. sheet lining on the inner side of the shutter including fixing with nickel plated piano hinges with screws etcetera complete as per specifications, approved drawings and design including carriage of material within all leads, lifts and other incidentals and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing Hydraulic door closer of ISI marked complete including carriage of material within all leads, lifts and other incidentals and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing aluminium double action Hydraulic floor spring ISI marked bright finished with nut & screws etcetera complete including carriage of material within all leads, lifts and other incidentals and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing aluminium door stopper ISI marked bright finished with nut & screws etcetera complete including carriage of material within all leads, lifts and other incidentals and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing Apature stainless steel wire gauge of 0.5 mm (Zero point five millimetre) dia wire and 1.4mm (One point four millimetre) on both side in aluminium fly wire mesh shutter for Door, windows, and clerestory windows alongwith necessary fitting complete as per detail drawing, as required at site including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 300x16mm (Three hundred into Sixteen millimetre) size aluminium oxidised Pilot/sheel or its equivalent sliding door bolts anodized transparent or dyed to required colour and shade with necessary screws etcetera including carriage of material within all leads, lifts and other. incidentals. as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 200x10mm (Two hundred into Ten millimetre) size aluminium Tower bolts (Barrel type) anodized transparent or dyed to required colour and shade of Pilot/sheel with necessary screws etcetera complete including carriage of material within all leads, lifts and other. incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 150x10mm (One hundred fifty into Ten millimetre) size aluminium Tower bolts (Barrel type) anodized transparent or dyed to required colour and shade of Pilot/sheel with necessary screws etcetera complete including carriage of material within all leads, lifts and other. incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing aluminium handles of approved quality to required colour and shade with the necessary screws etcetera complete including carriage of material within all leads, lifts and other. incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

125mm (One hundred twenty five millimetre) size

100mm (One hundred millimetre) size

75mm (seventy five millimetre) size

Providing and fixing 125x34x24 mm (One hundred twenty five into thirty four into twenty four millimetre) PTMT handles with necessary screws etcetera weighing not less then 23g (Twenty three gramm) complete including carriage of material within all leads, lifts and other. incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing aluminium hooks and eyes of 150mm (One hundred fifty millimetre) size of Pilot/Sheel of approved quality and of required colour and shade with necessary screws etcetera; complete including carriage of material within all leads, lifts and other. incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and laying 40mm (Forty milimetres) thick cement concrete flooring 1:2:4 (One cement : Two sand: Four graded crushed stone aggregate 20mm (twenty milimetres) nominal size laid in one layer finished with a floating coat of neat cement complete upto all floor level, including entire carriage of materials within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and laying 10mm (Ten millimetre) thick full body matt finished vetrified tiles 600x600x10mm (Six hundred into Six hundred into ten millimeters) thick of approved shade in flooring, treads of steps and landing laid on a bed of 12mm (Twelve millimeters) thick cement mortar 1:3 (One cement : three sand) laid over and jointed with neat cement slurry finished with flush pointing in white cement mixed with pigment of required shade to match the shade of tiles complete as per specifications, approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing double charge/Ultra charge heavy duty vetrified tiles of Nitco Kajaria/Orient/Bell/Johnson/ Somany of sizez 600mmx600mmx10mm (Six hundred millimetre into Six hundred into ten millimetre) manufactured of approved shade and colour in flooring, treads of steps and landings laid over 12mm (Twelve millimetre) thick cement mortar 1:3 (One cement : Three sand) jointed with cement slurry mixed with pigment to match the shade of tiles as required complete including carriage of material within all leads, lift and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing automatic hydraulically compressed and polished 300x300x25mm (Three hundred by three hundred by twenty five millimetre) polished precast terrazzo tiles of NTC ISI marked No-1237, top layer in 50% (Fifty percent) white, 50% (Fifty percent) grey cement. The ratio of chips shall be 55% (Fifty five percent) white chips and 15% (Fifteen percent) each maroon, yellow & dark green shade. The size of chips shall be O,B,2B of NTC (SG 403-B). The sample of tiles shall be got approved from the competent authority before its execution at site and laid in floor, treads, steps and landing on a bed of 25mm (Twenty five millimeters) thickness of cement mortar 1:6 (One cement : Six sand) jointed with neat cement slurry mixed with pigment to match the shade and colour of tiles (wherever required) including rubbing and polishing upto all floors levels complete including entire carriage of material within all leads, lift and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing Precast terrazzo tiles of NTC hydraulically compressed 20mm (Twenty millimetre) thick (with marble chips of specified sizes) in skirting and risers of steps not exceeding 30 cm in height on 10 mm thick cement plaster 1:3(1 cement: 3 sand)jointed with neat cement slurry mixed with pigment to match the shade of tiles (wherever required)including rubbing and polishing and carriage of material within all leads, lifts and other incidentals, as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government..

Providing and laying 25mm (Twenty five millimetre) thick Kota Stone flooring of 55x55cm (Fifty five into fifty five centimetre) size with 75 cm (Seventy five centimetre) wide Jaisalmer brand of yellow uniform colour in flooring and skirting of approved shade laid over base of cement mortar 1:4(One cement: Four sand) and jointed with Grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing/ moulding semi or round nosing complete including carriage of material within all leads, lifts and other. incidentals and further as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 300x600mm/300x450mm (Three hundred into six hundred millimetre/Three hundred into four hundred fifty millimetre) Cremic Glazed tile cladding with granite semi round moulding on top of approved shade of Kazaria/ Nitco/ Simpolo/ Somany/ Jonson/ Grient/ Bell on 12mm thick cement plaster 1:3 (One cement : Three sand) and jointed with white cement slurry complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and laying 20mm (Twenty milimetres) thick Cheema Pink granite stone flooring in combination with black granite board in flooring laid over 20mm (Twenty milimetres) thick base of cement mortar 1:3 (One cement : Three sand) including jointing with grey cement slurry mixed with pigment to match the shade of granite stone including rubbing, polishing, moulding, semi/round nosing complete including carriage of material within all leads, lifts and other incidentals, as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 2mm (Two millimetre) thick heavy duty homogeneous venyl flooring (ROBUST) ISI marked IS No-3462/1986 plain or coloured, carbed or mosaic/metalled finish laid over cement concrete floor with approved adhesive (damp proofing treatment to be paid for separately) complete including carriage of material within all leads, lifts and other incidentals, as per specifications, approved drawing, oer design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and laying heavy duty precast cement concrete 60mm (Sixty millimetre) thick interlocking paver blocks ISI marked vibro compacted upto M-50 (M-Fifty) grade including border or kurb block Grey or coloured over sub-base of concrete with 25mm (Twenty five millimetre) thick cement mortar 1:4 (One cement : Four sand) as per drawing and technical specification clouse 1504 complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and laying Labrador (rainbow series) tiles of NTC size 300 x 300 x 25mm (Three hundred into three hundred into twenty five millimetre) laid over 20mm (Twenty millimetres) average thick base of cement mortar 1:4 (One cement : four sand) and jointed with grey cement slurry mixed with pigment to match the shade of the tiles including rubbing and granite polish finish complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 150mm diameters pipe on wall face pvc Rain water pipes 6 kg/cm2 (Six killpgramme/square centimetre) working pressure class-B un-plastisizea PVC (D-plast) or its equivalant high density pipe conforming to IS 4985-2000 for rain water pipes fixed with approved adhesive and filling the joints complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing on wall face PVC acessories for Rain water pipes 6 kg/Cm2 working pressure class-B un- plastisize PVC (D-plast) or its equivalant high density pipe conforming to IS 4985-2000 for rain water pipes fixed with approved adhesive and filling the joints complete including carriage of material within all leads, lifts and other. incidentals and further as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

150mm (One hundred fifty millimtre)diametere PVC Plain bend

150mm (One hundred fifty millimtre)diametere PVC Plain shoe

Providing and fixing PVC clamps for rain water pipe 150mm (One hundred fifty milimetres) dia of Finolex/Vectus/ Rel pipe (Reliance)/Supreme of approved design fixedwith steel screws and rawl plugs etcetera complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing flushing 38cm (Thirty eight centimetre) overall with 0.60mm (Zero point six zero millimetre) thick prepainted sheet in roofing with hot dipped metalic zinc coated sheet with top coat of regular modified polyster organic coating of 20 (Twenty) microns over 5 (Five) microns primer coating + back coat of polyster of 5 (Five) microns over 5 (Five) microns primer coating including fixing with prepainted iron J or L hooks, bolts and nuts 6mm dia meter & prepainted G.I. limpet & bitumen washers complete with all accessories as required as per specifications and as per the direction of Engineer-in-charge including carriage of material within all leads, lifts and other incidentals as per approved architectural drawing, design and specification. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing anodised aluminium work for door frame, window, ventilators and glazed partitions frame with extruded built up standard tubular and other sections of approved make conforming to IS 733 and IS 1285 anodised transparent or dyed to required shade according to IS 1868. (Minimum anodic coating of grade AC 15) fixed with rawlplugs and screws or with fixing clips, or with expansion hold fastners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC/neoprene felt etcetera. Aluminium sections shall be smooth, rustfree, straight, mitred and jointed mechanically where ever required including cleast angle, aluminium, snap beading for glazinge/panelling C.P. brass/stainless steel screws. All complete as per architectural drawings and as per the directions of Engineer-In-Charge including carriage of materials within all leads and lifts and other incidentals.

Providing and fixing complete box of cup board of 25mm (Twenty five millimetre) thick water proof termite resistant commercial board of Green ply/Centuary ply/kit ply/Dura ply of ISI marked for shutters and shelves of approved brand.. The back of cup board shall have 8mm (Eight millimetre) thick water proof ply as per detail in drawing the shutter from all side shall have 6mm (Six millimetre) thick hard wood edging lipping and be finished with 1mm (One millimetre) thick laminated of Centuary/Green /Tesa/Muinotum of approved shade. The shelves of cup board shall be of 19mm (Nineteen millimetre) thick water proof commercial board of uniply/Green ply of approved shade with hard wood edge to be finished with 1mm (One millimetre) thick laminated of Centuary/Korean/White shade. All cut portion of the board shall have 6mm (Six millimetre) thick hard wood edging complete, including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing anodised aluminium work for door, window, ventilators and glazed partitions shutter with extruded built up standard tubular and other sections of approved make conforming to IS 733 and IS 1285 anodised transparent or dyed to required shade according to IS 1868. (Minimum anodic coating of grade AC 15) fixed with rawlplugs and screws or with fixing clips, or with expansion hold fastners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC/neoprene felt etcetera. Aluminium sections shall be smooth, rustfree, straight, mitred and jointed mechanically where ever required including cleast angle, aluminium, snap beading for glazinge/panelling C.P. brass/stainless steel screws. All complete as per architectural drawings and as per the directions of Engineer-In-Charge including carriage of materials within all leads and lifts and other incidentals. including carriage of materials within all leads, lifts and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge.

Providing and fixing glazing in aluminium door, window, ventilator shutters and partition etctera with PVC/neoprens gasket etctera glazing with glass panes of 5.00mm (Five point zero zero millimetre) thickness (weight not less than 13.75 kg/m2 (Thirteen point seventy five killogramme per square metre) complete as per spacifications the architectural drawings and the directions of Engineer-In_charge (cost of aluminium snap beading shall be paid in basic item.) complete including carriage of material within all leads, lifts and other incidentals and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 50mm (Fifty millimetre) dia of M.S. hollow pipe hand rail slip resistance on both side stretcharway and to be fixed as per Architectural drawing, design and specifications complete in all respect and as per the direction of Engineer-in-charge including carriage of material within all leads, lifts and other incidentals as per approved architectural drawing, design and specification. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 50mm (Fifty millimetre) diametre S.S.T. (Stainless steel) pipe handrail for staircase fixed with 35mm (Thirty five millimetre) diametre SST pipe Baluster as per detail drawings, specifications and design and as per the direction of Engineer-in-charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 50mm (Fifty millimetre) dia of S.S.T. pipe handrail slip resistant with round ends at two levels at 75 (Seventy five) and 90 cm (Ninety centimetre) height. It should extend 30cm (Thirty centimetres) beyond the top and bottom of the ramp as per detail complete in all respect and as per the direction of Engineer-in-charge including carriage of material within all leads, lifts and other incidentals as per approved architectural drawing, design and specification. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Painting two or more coats (excluding priming coat) with Nerolac/ Asian paint on new steel and other metal surfaces with enamel paint brushing to give an even shade including cleaning the surfaces of all dirt, dust and other foreign matters including carriage of material within all leads, lifts and other incidentals, as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Applying priming coat over new wood and wood based surfaces with Nerolac/ Asian paint after and including preparing the surfaces by thoroughly cleaning oil, grease, dirt and other foreign matters sand papering and knotting with ready mixed paint brushing wood primer pink including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Painting two or more coats (excluding priming coat) over new wood and wood based surfaces with Nerolac/ Asian paint of approved shade brushing to give an even shade including cleaning the surfaces of all dirt, dust and other foreign matters including carriage of material wthin all leads, lifts and other incidentals, as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

6mm (Six milimetres) thick cement plasters in ceiling with cement mortar 1:3 (One cement: Three sand) for all heights in all floor including carriage of material wthin all leads, lifts and other incidentals, as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

15mm (Fifteen millimetre) thick cement plasters in single coat on rough side of brick/concrete/stone walls for interior plastering including arises, internal rounded angles, chamfers or rounded angles not exceeding 80mm (Eighty millimetre) anf water charges in girth and finished even and smooth with cement mortar 1:6 (One cement: Six sand) above plinth level to floor all levels including carriage of material within all leads, lifts and other incidentals, as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

15mm (Fifteen millimetre) thick cement plasters in single coat on fair side of brick/concrete/stone walls for interior plastering including arises, internal rounded angles, chamfers or rounded angles not exceeding 80mm (Eighty millimetre) in girth and finished even and smooth with cement mortar 1:6 (One cement: Six sand) above plinth level to floor all levels including carriage of material within all leads, lifts and other incidentals, as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

15mm (Fifteen millimetre) thick cement plasters in single coat on brick/concrete/stone walls for exterior plastering including arises, internal rounded angles, chamfers or rounded angles not exceeding 80mm (Eighty millimetre) in girth and finished even and smooth with cement mortar 1:5 (One cement: Five sand) above plinth level to floor all levels including carriage of material within all leads, lifts and other incidentals, as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing glazing with froasted glass panes of 4mm (Four millimetre) thickness weight not less than 10.00Kg/m2 (Ten kilogram per square metre) complete including carriage of material within all leads, lifts and other incidentals, as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing aluminium anodised powder coated Grill 8mm (Eight millimetre) thick pattern to existing window/ventilatior with 80mmx80mm (Eighty millimetre into eighty millimetre) panels with 25x8mm (Twenty five millimetre into eight millimetre) aluminium flat in windows and ventilators including fixing with aluminium screws or bolts and nuts complete in alluminium channels base frames (Aluminium channels base frames to be measured and paid for separately) including carriage of materials within all leads, lifts and other incidentals as per approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Applying Birla J.K. white wall care putty over plaster surface after thoroughly brushing the surface free from mortar dropings, dust, loose material and other foreign matters, sand papered smooth to give final matt finish to the surface complete including entire carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Wall painting (two coats) with acrylic washable/premium emulsion paint Heritage/Alteck/Nerolac/Asian of approved brand and manufacture on undecorated wall surfaces to give an even shade including thoroughly brushing the surface free from mortar droppings and other foreign matter and sand papered smooth including applying of putty as required for making the surface complete including entire carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Wall painting (two coats) with premium emulsion paint Heritage/Alteck/Nerolac/Asian of approved brand and manufacture on undecorated wall surfaces to give an even shade including thoroughly brushing the surface free from mortar droppings and other foreign matter and sand papered smooth including applying of putty as required for making the surface complete including entire carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Distempering (two coats) with acrylic oil bound washable distemper with Nerolac/ Asian paint of approved brand and manufacture and of required shade on undecorated wall surfaces to give an even shade over and including a priming coat with distemper primer of approved brand and manufacture after thoroughly brushing the surface free from mortar droppings and other foreign matter and also including preparing the surface even and sand papered smooth including entire carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Finishing wall with fine Dune/ nature grit of Heritage having coating thickness 1.5mm of approved brand and manufacture with one coat of Birla white wall care putty to give an even shade after thoroughly brushing the surfaces to remove all dirt, dust and remains of lose powdered material complete including entire carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 0.60mm (Zero decimal Six Zero millimetre) thick prepainted steel sheet of TATA Durashine/Sail in roofing with hot dipped metalic zinc coated sheet with top coat of regular modified polyster (RMP) organic coating of 20 (Twenty) microns over 5 (Five) microns primer coating to back coat of polyster of 10 (Ten) microns over 5 (Five) microns primer coating including fixing with prepainted iron J or L hooks,bolts and nuts 6mm (Six millimetre) diametrewith prepainted limpet and rubber washers complete with all accessories as required including carriage of material within all leads, lifts of material and other incidentals and further as per specifications, approved architectural drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing ridges or hips 60 cm (Sixty centimetres) over all with 0.60mm (Zero decimal Sixty milimetres) thick prepainted steel sheet TATA Durashine/Sail/Jindal ridges (Factory made) shall be having proper Gola/Shape of steel sheet with hot dipped metallic Zinc coated sheet with top coat of regular modified polyester (RNP) organic coating of 20 (Twenty) microns over 5 (Five) microns primer coating plus back coat of polyester of 5 (Five) microns over 5 (Five) microns primer coating including fixing with prepainted iron J or L hooks, bolts and nuts 8mm (Eight milimetres) diametrewith prepainted G.I. limpet and bitumen washers complete with all accessories as required including carriage of material within all leads, lifts of material and other incidentals and further as per specifications, approved architectural drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing valleys 90 cm (Ninety centimetres) over all with 0.60mm (Zero decimal Sixty milimetres) thick prepainted sheet TATA Durashine/Sail in roofing with hot dipped metallic Zinc coated sheet with top coat of regular modified polyester organic coating of 20 (Twenty)microns primer coating back coat of polyster of 5 (Five) microns over 5 (Five) microns primer coating including fixing with prepainted iron J or L hooks, bolts and nuts 8mm (Eight milimetres) diametre with prepainted G.I. limpet and bitumen washers complete with all accessories as required complete including carriage of material within all leads, lifts and other incidentals, as per approved specifications drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 30cm (Thirty centimeters) wide 30cm (Thirty centimeters) deep of 0.63mm (Zero decimal six three milimetres) thick plain prepainted sheet gutter of TATA Durashine/Sail fixed with bolts and nuts and washers etcetera including making necessary connections with rain water pipe complete within all leads, lifts of materials and other incidentals, as per approved architectural drawing, design and specification as directed by the Engineer-Incharge complete.

Providing and fixing plain M.S. (mild steel) B.P. sheet 2mm (Two millimetre) thick fixed in eaves board/ceiling/cutting soffits/ceiling including jointing with gas/electric welding in position and applying a coat of red lead primer complete (frame work is to be measured and paid for separately) including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Steel work welded in built up sections, joints channels, angles, tees frame work for ceiling/false ceiling flats with connection plates or angles, cleat as in trusses, trussed purlins, main and cross beams, hips jack rafters, purlins connected to common rafters and the like of TATA/SAIL in building including cutting, fixing, lifting, hoisting and; placing in position and applying a coat of red lead paint complete including entire carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing factory made PVC door any colours of size 50x47mm with a wall thickness of 5mm made out of extruded 5mm rigid PVC foam sheet heat bend & mitred at corners and jointed with 2 Nos. of 150mm long brackets of 15mmx15mm .S square tube, the vertical doorprofiles to be reinforced with 19mmx19mm M.S. square tube of 19 gauge EPDM rubber gasket weather seal to be provided throughout the frame i/c fixing of door frame to wall with M.S. screws 100long with wooden or rawl plug emedded in masonry complete including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Wall painting (two coats) with epoxy resin paint og Pedilite/Heritage/Alteck/Nerolac/asian of approved brand and manufacture on undecorated wall surfaces to give an even shade including thoroughly brushing the surface free from mortar droppings and other foreign matter and sand papered smooth including applying of putty as required for making the surface complete including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing Unistone12mm (Twelve milimetre) cladding on Reinforced Cement Concrete.surface side as on faces of Arch masonry walls etcetera on 12mm (Twleve millimetre) thick cement plaster 1:3 (One cement : Three sand) and jointed with cement slurry including scaffolding etcetera complete including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 600x600x15mm (Six hundred into six hundred into fifteen millimetre) ACP panel /Everest fibre cement board ceiling with of aluminium channels base frame in ceiling with aluminium screws and beading etcetera complete including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing plinth protection with 40mm (Forty milimetres) thick interlocking paver block and 23cm (Twenty three centimetre) dia half round stone ware pipe for drainage purpose fixed on 1:4:8 (one cement : four sand : eight gradded crushed stone aggregate) for bedding of pipe complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (One cement : four coarse sand) C.I. cover with frame (light duty) 455x610 mm (Four hundred fifty five into six hundred ten millimetre) internal dimensions. Total weight of cover with frame to be not less than 38 kg (Thirty eight killogramme) (weight of cover 23 kg (Twenty three killogramme) and weight of frame 15 kg (Fifteen killogramme)), R.C.C. top slab with 1:1.5:3 mix (One cement : one point five Fine sand : three graded stone aggregate 20 mm (Twenty millimetre) nominal size), foundation concrete 1:5:10 (One cement : five fine sand : ten graded stone aggregate 40 mm (Forty millimetre) nominal size), inside plastering 12 mm (Twelve millimetre) thick with cement mortar 1:3 (one cement : three coarse sand), finished smooth with a floating coat of neat cement on walls and bed concrete etctera complete as per standard design: Inside dimensions 455x610 mm (Four hundred fifty five into six hundred ten millimetre) and 45 cm (Forty five centimetres) deep for single pipe line With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 (Seven point five) complete, as required at site including carriage of material within all leads, lifts and other incidentals, as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and laying cement concrete 1:2:4 (One cement : two Sand : four graded stone aggregate 20mm (Twenty millimetre) nominal size) in Foundation and plinth and curing complete excluding cost of form work complete including carriage of material within all leads, lifts and other incidentals as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing Polythyelene – Aluminium -Polyethylene (PE-AL-PE) composite pressure pipe of Kitec /Kisan U.V. stabilized with carbon black Conforming to IS-15450-2004 for water supply including clamp at 1m (One metre) spacing, cutting, fixing and making good the wall etcetera but excluding the cost of fittings (internal work) pipes exposed on wall including filling the joints with approved adhesive complete as per specifications, approved drawing, design and including entire carriage of material within all leads lifts and other incidentals. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

1216 (16mm (Sixteen millimetres) Outer diameters pipe

1620 (20mm (Twenty millimetres) Outer diameters pipe

Providing and fixing polythelene aluminium polythelene ( P:E) AEPE composite pressure pipe uv stabilized with carbonn block confiriming to 1620 kitec composite fitting including filling the joints with approved adhesive complete including carriage of material within all leads, lifts of material and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

1620 (One thousand six hundred twenty) 20mm (Twenty millimetre) Equal Tee

1620 (One thousand six hundred twenty) 20mm (Twenty millimetre) Equal elbow

1620 x 1620 x 20 mm (One thousand six hundred twenty into One thousand six hundred twenty into twenty millimetre) Female Branch tee

1620 x 20 mm (One thousand six hundred twenty into twenty millimetre) thread Female Elbow

1216 x 15mm (One thousand two hundred sixteen into fifteen millimetre) Male thread Connector

1216 x 15mm (One thousand two hundred sixteen into fifteen millimetre) Female thread Connector

1620 x 15mm (One thousand six hundred twenty into fifteen millimetre) thread Female Thread.

Making connection of galvanized mild steel distribution branch with galvanized mild steel main 20mm to 40nmm (Twenty millimetre to Forty millimetre)nominal bore by providing and fixing tees including cutting and threading the pipe complete including entire carriage of materials within all leads lifts and other incidentals. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing in trenches P.V.C. Supreme/Finolex/Prince pipe class "A" soil, waste and ventilating pipes conforming to IS No- 13592-92 (8/4.6 mm thick (Eight/Four point six millimetre) fixing with adhesive mixure complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

110mm (One hundred one millimetre) nominal bore/diametre(2.7 mm (Two point seven millimetre) thick pipe

75mm (Seventy five millimetre) nominal bore/diametre(2.2mm (Two point two millimetre) thick pipe

Providing and fixing M.S. holder bat clamps of approved design to PVC rain water pipe embedded including cement concrete blocks 100x100x100cm (One hundred into One hundred into One Hundred centimetres) of 1:2:4 (One cement: Two sand: Four graded crushed stone aggregate 20mm (Twenty milimetres) nominal size and cost of cutting holes and making good the walls etcetera complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

110mm (One hundred one millimetre) nominal bore/diametre

75mm (Seventy five millimetre) nominal bore/diametre

Providing and fixing PVC accessories for sewerage pipe plain bend of Supreme/Finolex/Prince/Astral or equivalent conforming to IS No. 14735-99 including fixing with approved adhesive etc. complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

110mm (One hundred ten millimetre) nominal bore/diametre

75mm (Seventy five millimetre) nominal bore/diametre

Providing and fixing P.V.C. tees medium class of Supreme/ Kisan /Astral or equivalent conforming to IS No. 14735-99 including fixing with approved adhesive etc. complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

110mm (One hundred one millimetre) nominal bore/diametre

75mm (Seventy five millimetre) nominal bore/diametre

Providing and fixing P.V.C. Heal Rest of Supreme/ Finolex/Prince /Astral or equivalent including fixing joints with approved adhesive mixure complete as directed by the Engineer-Incharge, including entire carriage of materials within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

110mm (One hundred one millimetre) nominal bore/diametre

75mm (Seventy five millimetre) nominal bore/diametre

Providing and fixing P.V.C. Collar of Supreme/ Finolex/Prince /Astral or equivalent including fixing with approved adhesive mixure complete as directed by the Engineer-Incharge, including entire carriage of materials within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

110mm (One hundred one millimetre) nominal bore/diametre

75mm (Seventy five millimetre) nominal bore/diametre

Providing and fixing P.V.C. Cowl Supreme/ Finolex/Prince /Astral or equivalent ISI marked Conforming to IS No-14735-99 including fixing with approved adhesive complete, including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

110mm (One hundred ten millimetre) diametre

75mm (Seventy five millimetre) diametre

Providing and fixing PVC accessories for sewerage pipe plain bend of Supreme/Kisan conforming to IS No. 14735-99 including fixing with approved adhesive etc. complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

110mm (One hundred ten millimetre) nominal bore/diametreP.V.C. Door Tee

110mm (One hundred ten millimetre) nominal bore/diametreP.V.C. Plain Tee

110x75mm (One hundred ten into Seventy five millimetre) nominal bore/diametreP.V.C. Floor Trap

40mmx1.00mtrs(Forty millimetre into One point zero zero metre) nominal bore/diametre P.V.C. Long Bend

40mm (Forty millimetre) nominal bore/diametre P.V.C. Elbow

Providing and fixing 110x90mm (One hundred ten into nineteen millimetre) nominal size/diameter P.V.C. floor trap Supreme/ Finolex/Prince ISI marked Conforming to IS-14735-99 of self cleaning design including fixing with approved adhesive including cost of cutting and making good the wall and floor etctera complete, including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing viterous china water closet squating pan orissa type W.C. Pan No. 20090 size of 53x41cm (Fifty three into forty one centimetre) of Hindware/Cera/Jaguar of star white/snow white shade (earth work, bed concrete, foot rest and trap to be measured and paid for separately) including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing vitreous china wash down water closet (European type W.C. pan) of STAR No-20087 (5-10) of size 57x35x39cm (Fifty seven into thirty five into thirty nine centimentre) of Hindware /Cera/Jaguar of star white/snow white shade with internal P or S trap including jointing the trap with soil pipe in cement mortar 1:1 (One cement : One sand) (seat and cover to be measured and paid for separately) including carriage of material within all leads, lifts and other incidentals, as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 10.00 (ten) litres capacity PVC a low level aual flushing cistern Europeon standard ISI marked No. 7231 (Sleek plus) of Hindware/Cera/Jaguar of snow white/Star/white shade with a pair of C.I. or mild steel brackets, complete with fitting such as lead valve less syphon, 15mm nominal size brass ball valve with polythene float, C.P. Brass handle, unions and couplings for connections with inlet, outlet and overflow pipes, 40mm dia C.P. flush bend including cutting holes in walls and making good the same and connecting the flush bend with cistern and closet (overflow pipe to be measured and paid for separately) complete including carriage of material within all leads, lifts and other incidentals as per approved specifications, drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 110mm (One hundred ten millimetre) nominal bore PVC P or S traps for water closet (squatting pan) including jointing the trap with pan and soil pipe with adhasive including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing plastic seat hollow type and cover of Cera/Hindware/Jaguar for wash down water closet with C.P. brass hinges and rubber buffers matching with shade of European W.C. pan including entire carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing vitreous china urinal including connection the urinal with waste pipe by means of white lead mixed with chopped hemp large flat back No-60002 of Hindware/Cera/Jaquar of star white/Snow white shade of size 39x37.5x59cm (Thirty nine into Thirty seven point five into Fifty Nine centimetre) including neccessary fitting complete including entire carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing vitreous china wash down closet EWC matrix fixed with jet pressure of Hindware/Cera/Jaguar of star white/Snow white shade fixed to PVC cistren (Sleek plus) owith fitting complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing vitreous china wash basin under counter Garnet No-10080 of Cera / Hindware / Jaguar of Snow white/star white shade of size 58x43cm (Fifty eight into forty three centimetres) under counter basin with single hole for pillar tap and C.I. or M.S. brackets painted white including cutting holes and making good the same with pedestal but excluding neccessary fitting complete (Pedestal to be measured and paid for separately) including entire carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing vitreous china wash basin Delta No-10010 of Cera / Hindware / Jaguar of Snow white/star white shade of size 55x40cm (Fifty five into forty centimetre) with single hole for pillar tap with C.I. or M.S. brackets painted white including cutting holes and making good the same without pedestal and fittings including entire carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 610x510mm (Six hundred ten into Five hundred ten millimetre) depth of bowl 200mm (Two hundred millimetre) stainless steel kitchen sink with drain board of AMC/Unik/Diamond with C.I. or M.S. brackets painted white including cutting holes in walls and making good the same but excluding the cost of fitting complete including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing vitreous china pedestal No-11018 of Cera / Hindware / Jaguar of approved shade for wash basin complete with a hole at the back for the receiption of pipe and fittings including entire carriage of material within all leads, lifts and other incidentals, as per specifications, approved drawing, design and as directed by the Engineer-in-Charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 32mm (Thirty two millimetre) nominal size diametrerubber plug for wash basin (Heavy duty makes ISI marked IS No. 8931 & 7893) including entire carriage of material within all leads, lifts and other incidentals and as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 32mm (Thirty two millimetre) diametreM.I. union for wash basin and sink (Heavy duty makes ISI marked IS No. 8931 & 7893) complete in all respect including entire carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 32mm (Thirty two millimetre) diametre PVC waste pipe Supreme/Finolex/Prince/ Astral ISI marked for wash basin or sink including brass check nut complete, including entire carriage of material within all leads, lifts and other incidentals, as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 100mm (One hundred millimetre) diametre C.P. Grating of Jal/ESS/Jaguar (Heavy duty makes ISI marked IS No. 8931 & 8934) for gully floor or Nahni trap including entire carriage of material within all leads, lifts and other incidental as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing flat back 600x450mm (Six hundred into Four hundred fifty millimetre) beveled edge mirror of Hindware/Cera of superior glass mounted on 6mm (Six millimetre) thick A.C. sheet or ply wood sheet and fixed to wooden plugs with C.P. brass screws and washers including entire carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 600x20mm (Six hundred into Twenty millimetre) C.P. brass Towel rail ISI marked IS No. 8934 of Jal/ESS ESS/Jaguar complete with C.P. brass brackets fixed to wooden plugs with C.P. brass screws etcetera including entire carriage of material within all leads, lifts and other incidentals, as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 600x120mm (Six hundred into One hundred twenty millimetre) glass shelf with C.P. brass Jal/ESS ESS/Jaguar (Heavy duty makes ISI marked IS No. 8934) with brackets and guard rail complete fixed to wooden plugs with C.P. brass screws including entire carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing C.P. brass toilet paper holder of (Heavy duty make ISI marked No- 8931 & 8934) of Jal/ESS ESS/Jaguar including entire carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 600x300mm (Six hundred into Thre hundred millimetre) nominal size vitreous china Division Plate for Urinals Cera/Hindware/Jaguar of approved quality and colour complete as per specifications, approved drawing and design including entire carriage of material within all leads lifts and other incidentals, and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing chromium plated jet pressure cistren No 2101 of Jal/Jaguar/ESS ESS including fitting complete including entire carriage of material within all leads lifts and other incidentals and as per specifications and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 15mm (Fifteen millimetre) nominal bore chromium plated PTMT push cock tap of (Heavy duty make ISI marked No- 8931 & 8934) of Jal / ESS ESS/Jaguar complete as per specifications including entire carriage of material within all leads lifts and other incidentals, and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 15mm (Fifteen millimetre) nominal bore chromium plated fancy bib tap of ISI marked No. 8934 of Jal/JaguarESS ESS/Hindware/Cera of Contessa sereies of Hindware including neccessary fiiting complete as per specifications and entire carriage of material within all leads lifts and other incidentals, and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 15mm (Fifteen millimetre) diametre C.P. brass stop cock ISI marked No. 8934 of Continental series of Jaguar/Classic sereies of Hindware/Floral series of Cera/Hindware series of Jal including neccessary fitting complete as per specifications including entire carriage of material within all leads lifts and other incidentals, and per as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 15mm (Fifteen millimetre) diametre C.P. brass pillar tap with capstan head ISI marked No. 8934 of Continental series of Jaguar/Classic sereies of Hindware/Floral series of Cera/Hindware series of Jal with neccessary fitting complete including entire carriage of material within all leads, lifts and other incidentals, as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 15mm (Fifteen millimetre) diametrebrass angle valve without nuts ISI marked IS No. 8934 of Continental series Jaguar / Classic series of Hindware/Floral series of Cera/Hindware series of Jal with neccessary fitting complete as per specifications including entire carriage of material within all leads lifts and other incidentals, and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing C.P. brass full way valve with wheel ISI marked IS No. 8934of Continental series of Jaguar / Classic sereies of Hindware/ Floral series of Cera/Hindware series of Jal with neccessary fitting complete as per pecifications including entire carriage of material within all leads lifts and other incidentals, and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

15mm (Fifteen millimetre) nominal bore

20mm (Twenty millimetre) nominal bore

Providing and fixing 15mm (Fifteen millimetre) nominal bore C.P. brass valve (Horizontal plunger type) high pressure of continental series of Hindware/Floral series of Cera/Hindware series of Jal with copper plate as per specifications including entire carriage of material within all leads lifts and other incidentals, and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 15mm (Fifteen millimetre) nominal bore PVC connection pipe with brass union 45cm (Forty five Centimetre) length complete including entire carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing P.V.C. SINTEX water storage tank (Tripple layer) having capacity of 1000 (One thousand) liters of ISI 12701 marked with G.I. (Galvanised iron) inlet and outlet connection, 15mm (Fifteen millimetre) nominal bore ball valve and mosquito proof P.V.C. cover with locking arrangment including hoisting upto all heights above ground level including entire carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 150mm (One hundred fifty millimetre) nominal bore/diameter to level or slopes PVC pipe of Supreme/Finolex/Prince Grade 'A' pipe for sewerage line including jointing with approved adhesive mixture including entire carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and laying cement concrete 1:4:8 (One cement : Four sand : Eight graded crushed stone aggregate 40mm(Forty millimetre) nominal size) bedding for sewerage pipe of 150mm (One hundred fifty millimetre) diameter with necessary form work and curing complete in all respect including entire carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Construction of manhole with R.C.C. top slab in 1:2:4(One cement: Two sand: Four graded crushed stone aggregate 20mm (Twenty millimetre nominal size) foundation concrete 1:4:8 (One cement: Four sand: Eight graded crushed/broken stone aggregate 40mm (Forty millimetre nominal size) inside plastering 15mm (Fifteen millimetre) thick with cement mortar 1:3 (One Cement: three sand) finished with a floating coat of neat cement and making channels in cement concrete 1:2:4(One cement: Two sand: Four graded crushed stone aggregate 20mm(Twenty millimetre nominal size) finished smooth complete including curing and testing inside size 800x800mm (Eight hundred into Eight hundred millimetre) 500mm(Five hundred millimetre) deep, including C.I. cover with frame (light duty single seal pattern -I) 450x610mm (Four hundred fifty into six hundred ten millimetre) internal dimensions. Total weight of cover and frame should be 38 Kgs (Thirty eight kilograms) i.e. weight of cover 23 Kgs (Twenty three kilograms) and weight of frame 15 Kgs (Fifteen kilograms) with 300mm (Three hundred millimetre) thick walls of squared rubble masonry coursed with hard stone of approved quality in cement mortar 1:3 (one cement: three sand) including entire carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Construction of manhole with R.C.C. top slab in 1:2:4(One cement: Two sand: Four graded crushed stone aggregate 20mm(Twenty millimetre nominal size) foundation concrete 1:4:8(One cement: Four sand: Eight graded crushed/broken stone aggregate 40mm(Forty millimetre nominal size) inside plastering 15mm ( Fifteen millimetre) thick with cement mortar 1:3 ( One Cement: three sand) finished with a floating coat of neat cement and making channels in cement concrete 1:2:4(One cement: Two sand: Four graded crushed stone aggregate 20mm(Twenty millimetre nominal size) finished smooth complete including curing and testing inside size 800x800mm (Eight hundred into Eight hundred millimetre) 1.00 mtr (One metre) deep, including C.I. cover with frame (light duty single seal pattern -I) 455x610mm (Four hundred fifty five into six hundred and ten millimetre) internal dimensions. Total weight of cover and frame should be 38 Kgs (Thirty eight kilograms) i.e. weight of cover 23Kgs(twenty three kilograms) and weight of frame 15 Kgs (Fifteen kilograms) with 300mm (Three hundred millimetre) thick walls of squared rubble masonry coursed with hard stone of approved quality in cement mortar 1:3 (one cement: three sand) including entire carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Supplying cast iron cover with frame for manhole of frame of internal dimension 455x610mm (Four hundred fifty five into six hundred ten milimetre) rectangular C.I. Cover (light duty single seat pattern-1) 38 Kgs (Thirty eighty kilograms). The weight of cover to be not less than 23 Kgs (Twenty three kilograms) and weight of frame 15Kg (Fifteen kilogram) complete in all respect including entire carriage of materials within all leads lifts and other incidentals, and as per specification and as directed by the Engineer-Incharge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and laying cement concrete 1:3:6 (One cement : Three sand : Six graded crushed stone aggregate 40mm (Forty milimetre) nominal size for haunching of P.V.C. sewerage pipe including necessary form work and curing complete as per specifications, approved drawing, design and as directed by the Engineer-in-charge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing of water lifting pump of 1.00 HP (One point zero horse power) of Kirloskar/ Crompton / Wortington including all necessary fittings and entire carriage of materials within all leads lifts and other incidentals, and as per specification and as directed by the Engineer-Incharge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

Providing and fixing 15mm (Fifteen milimetres) nominal bore to wall ceiling and floor galvanised mild steel tubes (Medium grade) ISI marked of approved quality tube fitting with clamps including making good the wall, ceiling and floor complete and entire carriage of materials within all leads lifts and other incidentals, and as per specification and as directed by the Engineer-Incharge. The rate is inclusive of octroi, royality, Malkana, Toll tax, sale tax, GST and any other taxes imposed by the Government.

M/s Surindera Traders

M/s Kulwinder Singh and Co.