TENDER FOR CIVIL/ INTERIOR/ ELECTRICAL/HVAC WORK FOR 6 SUB REGISTRAR OFFICES (KODINAR, JETPUR, LAKHPAT, NALIYA, VANKANER, RAPAR).

Sr. No. Description Quantity Unit Rate Amount

Demolition of existing Civil Work, Interior, ELV,MEP, HVAC & electrical work including stacking of serviceable

1 materilas and disposal of unserviceable materials with all lead and lift as per Instruction of Architect/Grimco 1.00 Lumsum 10,500.00

Providing Brick masonary using common burnt clay building bricks for foundation and plinth having crushing

strength not less than 35 kg./ Sq. Cm. in Cement Mortar 1:6 (1- Cement : 6 -fine sand) incl.

watering,curing,scaffolding and racking out joints etc. comp as per directed by eng. incharge.Foundation

MASONARY WORK: Half brick masonry in common brunt clay building bricks having crushing strength not less

3 than 35 Kg/Sq.Cm. in Cement mortar 1:4 (1-Cement :4 -coarse sand) in (Conventional) Rate Shall Be Consider 6.72 SQMT 679.00

All Floor & Work Shall be Execute as per Architect Grimco Manager Instruction.

Providing 15 mm thick cement plaster in single coat on wall for interior plastering and finished even and

smooth in cement mortar 1:4 ncl. finishing with a floating coat of neat cement slurry. (1 cement : 4 fine sand )

1) 15mm Plaster

Providing and applying Gypsum plaster Work minimum 10 to 12 mm thick in Wall and minimum 6 to 8 mm

thick in ceiling , including all labors, tools, tackles, scaffolding, surface preparation, mixing of material,

transportation (lead & lift) applying in position, Levelling, finishing, cleaning etc. complete to satisfaction of

EIC. The rate also include making of grooves above skirting, dado tiles and around window and door jambs etc.

(cost of Bonding agent to the ceiling or RCC surfaces is to be included in the item)as per instruction of

architect/GRIMCO Manager.

Providing and laying granite 18mm thick in jame seal of door window laid on a bed of 10mm thick cement

mortar 1:4 (1-cement : 4-coarse sand) with suitable Chemical as per eng. incharge instruction finishing with

flush pointing incl. rounding the outer edge, moulding,polishing etc comp as per directed by eng incharge.

Prov. & laying Digital 24" x 24" Full Body mat Finish/Glossy Finish Vitrified 8 mm to 9 mm thick tiles

flooring/Matching With Existing Tiles laid on bed of 20mm (Average) base of Cement Mortar 1:6 (1-Cement :

7 Coarse Sand) on new surface/Old Surface and jointed with colour cement slurry including with 4 mm Epoxy 5.88 SQMT 1,450.00

finished with flush pointing & cleaning the surface etc. completed of any shade approved by Grimco

Manager/Architect.

Prov. & laying Digital 24" x 24" Full Body mat Finish/Glossy Finish Vitrified 8 mm to 9 mm thick tiles Skirting

/Matching With Existing Tiles laid on bed of 20mm (Average) base of Cement Mortar 1:6 (1-Cement : 6 Coarse

8 Sand) on new surface/Old Surface with 4 mm Epoxy and jointed with colour cement slurry including finished 39.36 SQMT 1,550.00

with flush pointing & cleaning the surface etc. completed of any shade approved by Grimco

Manager/Architect.

Providing & Fixing Handicape Tractile Tiles (Shelf Adhesive) The Tiles shall be Fixed with Suitable Adhesive/

Scrue Material with All required Additional Hardware Suppot or Tiles laid on bed of 20mm (Average) base of

Cement Mortar 1:6 (1-Cement : 6 Coarse Sand) on new surface/Old Surface with 4 mm Epoxy and jointed with

colour cement slurry including finished with flush pointing & cleaning the surface et. Rate shall be Including

Transportation , All Floor , Hardware, Adhesive Material etc as per Architect/GRIMCO manager Instruction.

Removing the Concrete & Concrete Cover by chipping off the concrete at the places and in the manner and

upto the depth, in regular shape as advised by the Architects at site without damaging the reinforcement &

adjoining RCC so as to expose the existing reinforecement bars for welding & tieing with the new

reinforecement bars, cleaning & making the exposed surface free from all loose materials, dust, greese, oil,

10 impurities etc using suitable powered & manual devices such as cutter, drilling machine, chisel and light 20.40 SQMT 900.00

hammering, wire & jute brushs, air blowing, water jetting etc., carting away & final disposal of debries etc out

of the premises as per specifications & as directed by the Architects / Bank to their satisfaction (Actual

exposed flat surface area shall be measured for payment.)Rate Shall Be Consider All Floor & Work Shall be

Execute as per Architect Grimco Manager Instruction.

Providing & Fixing Handicape Wheel Chair as per Architect/GRIMCO Manager Instruction.Basic Rate Rs :

Providing & fixing S.S. Pipe railing of 75mm dia pipe not less than 18guage, in 3 rows supported Horizontally

by S.S.304 Pipe of 50mm dia at every corners & 1.5 mt C/C incl. concrete block (0.35 X 0.35 X 0.35) incl.

guage S.S. sheet using required cutting, jointing, Hardware, welding, threading, drilling & fixing etc. comp. as

directed as per drawing as per Architect/Grimco Manager Instruction.

Dry Wall Full ht Partition 75mm thick with aluminium framework with 12mm thk mdf exterior grade / 12mm

thick hdf finish on both sides Providing and fixing full height / half height double skin wooden partition upto

ceiling or beam bottom as per drawing and framing in plywood /Alluminium Framing with both side cover

with 12mm thick comm. ply finished both Side with 1.0mm thick selected laminate,OR (mdf(8 mm ply with

13 mm MDF with Selected Paint)) without any air gap and grooving as per design& instruction of the 39.44 SQMT 5,150.00

EIC/Architect. wooden framing to be erected above false ceiling.No extra cost to be paid for the same Before

installation, make hole/face plate for conduit pipes of electrical / networking cables with openable stud from

partition Including all materials and labour etc. Open edges also finish with laminate. complete as per detail

drawing and instruction of Architect/engineer-in charge.

Glass Window: Providing and fixing of full /Partly glazed 12mm thk toughed glass partition/Door, Providing and

fixing full height glass partition made out of glazed partition with stanless steel U channel profile in the top

and Bottom with 10mm thick clear toughened glass fixing with Plywood box with Laminate Finish for Support

top/Bottom/Both side as per EIC /Arch. Instruction filled with The glass to be butt jointed with 2 to 3 mm edge

14 chamfer and edge polishing all around. Distance between two butt jointed glass panels not to exceed 4mm. 5.76 SQMT 4,900.00

for Top/Side Support Make Plywood Box with Laminate Finish as per Grimco Manager/Architect and Door

Three Side Make 0.30 m Wide Frame For Support as per Instruction.Edges and grooves between glass panels

to be filled with clear silicon sealant of approved make neatly applied as indicated in the drawing. As per the

sample approved by the Architect/Grimco Manager , including all hardware.

TENDER FOR CIVIL/INTERIOR/ELECTRICAL/HVAC WORK FOR SUB REGISTRAR OFFICE JETPUR.

Sr. No. Description Quantity Unit Rate Amount

Providing and fixing window having extruded aluminum Colour anodized section frame main outer size 95mm

x 24mm x 1.17mm @ wt.of 0.738 Kg/mt , horizontal Three track member size 92mm x 31.75mm x 1.30mm,@

Wt.1.07 Kg/mt , vertical member of size 92mm x 31.75mm x 1.50mm @ Wt. 1.06 Kg/mt with sliding shutters of

15 horizontal member size 40 mmx18mm x1.29mm @ wt.of 0.456 Kg/mt, vertical member of size 40mm x 18mm 3.15 SQMT 1,696.73

x 1.29 mm @ wt.of 0.456Kg/mt/ with 5 mm thick transparent bronze colour tinted float glass with powder

coated aluminum fittings

and fixtures and transparent silicon sealant glass fixing to frame as per details etc

Providing and fixing double skin Acoustic wooden partition upto ceiling or beam bottom as per drawing and

framing in plywood /Alluminium Framing with both side cover with 12mm thick comm. ply finished both Side

with 1.0mm thick selected laminate,OR (mdf(8 mm ply with 4 mm MDF with Selected Paint)) without any air

gap and grooving as per design& instruction of the EIC/Architect. wooden framing to be erected above false

ceiling.No extra cost to be paid for the same Before installation, make hole/face plate for conduit pipes of

electrical / networking cables with openable stud from partition Including all materials and labour etc. Open

16 edges also finish with laminate. complete as per detail drawing and instruction of Architect/engineer-in 18.29 SQMT 5,600.00

charge.Providing and fixing acoustic wall paneling 10 mm Thick Exposed Acoustic Panel with 2000gm/Sq.M

Density, 100% Polyester Fiber with 0.60 to 0.90 NRC Acoustic Performance material. with Design to create

sound insulation effect. top surface covering paneling to create C groove of 9 mm deep. All grooves are

finished with paint. as instructed as per Architect/GRIMCO Manager. Complete with all hardware's like nails, ss

screws, adhesives etc. Shown in detail drawings. Contractor has to provided all necessary cut outs for Electrical

works & no extra payment shall be made for it.

Providing and fixing Floor Spring 120 kg Load Adjustable,Maximum Door Width 1000 mm,Maximum Opening

17 angle 130 Degree, 90 Degree Hold open in Both Direction as per Architect & EIC Instruction.Rate Shall be 3.00 Nos 4,800.00

Including Fitting Charge.

Providing and fixing Blue Space GPRH Solid Standoffs Heavy-Duty Commercial Grade-304 Stainless Steel Push

18 Pull Door Handle - 18 Inch as per Architect & EIC Instruction.Rate Shall be Consider In Pair. Including Fitting 3.00 Nos 1,600.00

Providing ,Removing Existing Door Closer and fixing Door Closer and Blue Space Solid Standoffs Heavy-Duty

19 Commercial Grade-304 Stainless Steel Push Pull Door Handle Rate Shall be Including Fitting Charge. as per 3.00 Nos 2,800.00

Architect & Grimco Manager Instruction.

FULLY SOLID / PARTLY GLAZED DOOR Providing & fixing 32 to 35 mm Flush Door With Both Side Laminate .fully

solid / Partly glazed flush door with Laminate finished door as shown in the drg. Size of each door shall be as

per the dimensions given in the drawing. Door shall consist of approved make 8mm thk. clear float glass / MS

powder finish perforated grill pre-fitted if Require with necessary hardware for smooth swinging action. The

edge of the shutter should be surrounded with Paint. Rate shall include necessary approved locking systems,

20 SS Handle pair, floor springs / Door closer (Heavy duty or equivalent), gaskets, knob, stopper & miscellaneous 5.67 SQMT 5,800.00

hardware items. Including all materials and labour etc. complete as per detail drawing and instruction of

engineer-in charge and consultant. The solid doors shall be supplied with first class ghana teak wood frame of

125 x 75mm finished size with necessary grooves, wroght framed & fixed in position with MS hold fast, frame

finished by monocoat polish.Size of each door shall be measurement as per drawing.

Door Laminate Change. To be Removed & Refixing .Providing and Fixing Both Side 1 mm laminate & Existing

Removing Laminate Door of washable type material of good quality with appropriate adhesive of approved

quality like fevicol or its equivalent brands with smooth finishing and in line level with regular edges as per

21 requirement and site situation incl. cutting and any necessary cut outs of Glass and Cutout Finish With 2.00 Each 3,950.00

Plywood With Selected Laminate & Door if any required etc. comp. in all respects. All rates are inclusive of

hardware like, nails, screws, abro taps, adhesive etc. complete.

Providing & Fixing Wooden Vertical Stand for Standing Plateform Support 600 X 1200 mm center to Center

Distance with 19 mm Plywood With Laminate/ Paint and above Standing Plateform Made 19 mm Plywood

With Selected Laminate Outer All Exposed Part Shall be Fitted 18 mm Plywood With Laminate with Adhesive

Material , Nail Scrue Abro tap Etc all Required Hardware.

Providing & fixing 18mm thick cement sheet/18 mm Plywood for panelling work with Selected Colour as per

approved by Architect/Client. The rate shall be for all floors, at all heights, all shapes including CNC /

Engraving and all costs.

The frame work shall be made from square hollow aluminum anodized section size of 50x50x1.5 mm &

25x50x1.5 mm of approved make conforming to IS code. The framework shall be fixed as per drawing vertically

@ 600 mm c/c & horizontal 600 mm c/c horizontally. which shall be provided from gr. level to RCC slab /

beams soffit level. Rates shall also be inclusive of cost of making CNC/engraving /cut outs/ openings for

23 electrical fixtures, tube lights /air-conditioners ,grills, diffusers etc & providing additional sections for 6.72 SQMT 4,500.00

strengthening around the openings/cutouts additional support for fixing of patch fittings for doors, making

grooves between wall & board, in filled with termite treated members if required or as per drawing

/instruction of EIC. All curved surfaces, recesses, waffles shall be part of the paneling including Openable

shutter wherever required area and finished with the same material. Work complete including all type of

material, fittings , fixtures, Finish, loading , unloading , transportation, all leads ,accessories, groove, adhesive

,tape, headless nails, sample mockup, all floor , all levels, all heights etc complete as per detailed drawings

,specifications & instruction of Client/EIC.sample mock shall be approved from as per Architect/GRIMCO

Manager &instruction.

TENDER FOR CIVIL/INTERIOR/ELECTRICAL/HVAC WORK FOR SUB REGISTRAR OFFICE JETPUR.

Sr. No. Description Quantity Unit Rate Amount

Ply palmet work : Providing and fixing wooden pelmets of upto 150mm/950 mm x 150 to 600 mm L shape

made of 19mm thick ply as per IS 303 MR Grade and beading of 4mm thick and 25mm wide Ghana Teak wood

for curtains/ blinds/projection screen of openings. Rate to be inclusive of lipping, cutting, wastages, necessary

24 fixtures, nails, adhesives, necessary scaffolding, fixing at all heights and for all floors as per drawing and 6.40 Rmt 3,200.00

approved sample etc finish with veneer semi gloss PU finsh. (Mode of Measurements: Only the palmet length

shall be measured & paid for the items in which palmet work is not inclusive in item description)

Providing office table of required size and height 75 cm.Table top in required shape to be made from 19mm

ply with 1. mm thick laminate . Base to be made from 19mm thick ply with 1. mm thick laminate on outer side

and rear surface, including providing drawers & Shutter,Keyboard Tray,Apron as per given design, teak wood

wood beading as per requirement and Providing Laminate on inside surface as per Architect/Grimco Manager

Side Table (0.9 x 0.45 x 0.75)

Providing 19 mm Ply With Laminate on Side table.top in required shape to be made from 18mm Plywood post

26 With lamineted board structure , Back Side 12 mm Plywood With Laminate. providing Shutters ,Shelves as per 1.00 Nos. 9,500.00

given design. Providing Laminate on inside/Outside surface.as per Architect/Grimco Manager Instruction.

Providing office table of required size and height 75 cm.Table top in required shape to be made from 19mm

ply with 1. mm thick laminate . Base to be made from 19mm thick ply with 1. mm thick laminate on outer side

and rear surface, including providing drawers & Shutter,Keyboard Tray,Apron as per given design, teak wood

wood beading as per requirement and Providing Laminate on inside surface as per Architect/Grimco Manager

Perforated waiting... Providing and Fixing Three Seater made of black powder coated regular MS ERW tube

having 8.0+/-0.03 cm x 4.0 +/- .03 cm x 0.2 +/-0.014 cm size.Providing & Fixing Cushionon Seating & Back as per

Instruction. The Shell to be assembled on the cross beam with help of M8 Bolts. Legs to be chrom plated made

of rolled steel with 0.12 +/- 0.013 cm thinkness.Seat and Back Shell to be peforated made from cold rolled M.S.

Sheet (DIN 1623 Part 1 ST -12 Grade), 0.14 +/- 0.013 cm thickness. The side Bar is made of chrome Plate solid

steel 3.0 cm +/- 0.03cm x 1.2 cm +/-0.03 cm with fluting and plastic inserts. Rate Shall be Including

Transportaion, Loading,all Taxes. Install as per Architect/Grimco Manager Instruction.

Perforated waiting... Providing and Fixing Three Seater made of black powder coated regular MS ERW tube

having 8.0+/-0.03 cm x 4.0 +/- .03 cm x 0.2 +/-0.014 cm size. Legs to be chrom plated made of rolled steel with

0.12 +/- 0.013 cm thinkness.Seat and Back Shell to be peforated made from cold rolled M.S. Sheet (DIN

29 Part 1 ST -12 Grade), 0.14 +/- 0.013 cm thickness. The side Bar is made of chrome Plate solid steel 3.0 cm +/- 4.00 Nos 17,000.00

0.03cm x 1.2 cm +/-0.03 cm with fluting and plastic inserts. Rate Shall be Including Transportaion, Loading,all

Taxes. Install as per Architect/Grimco Manager Instruction.

Storage.Providing 19 mm Ply With Laminate on Side table.top in required shape to be made from 18mm

Plywood post With lamineted board structure , Back Side 12 mm Plywood With Laminate. providing Shutters

,Shelves as per given design. Providing Laminate on inside/Outside surface.as per Architect/Grimco Manager

Direct Bought Out Item: HB CHAIR Adj. Arms Larger Seats seat size: 47.0 cm. (w) x 51.5 cm. (d) back size :45.0

cm. (w) x 65.3 cm. (h)high resilience (hr) polyurethane foam: the hr polyurethane foam should be moulded

with density =55+/-2 kg/m³ and hardness 16 ± 2 kgf for 25% compression. armrests : the armrests have an up-

down adjustment of 8.5 ± 0.5cm which should be provided in armrest structure. armrest top has an integrated

layer of thermoplastic elastomer (tpe).

lumbar support assembly: the lumbar support consshould be ts of polypropylene pad with moulded

polyurethane foam & covered with polyester fabric. the height of lumbar pad can be adjusted through two

projecting knobs provided on the rear side of the pad. lumbar pad has an adjustment of 8.0 ± 0.5 cm in height.

front pivot synchro mechanism: the adjustable tilting mechanism should be designed with the following

• 360° revolving type.

• single point control.

31 • front-pivot for tilt with feet resting on ground ensuring more comfort. 1.00 NOS 14,000.00

• tilt tension adjustment.

• 4-position locking with anti-shock feature.

• seat/back tilting ratio of 1:2.

pneumatic height adjustment: the pneumatic height adjustment has an adjustment stroke of 10.0 ± 0.3 cm.

pedestal assembly: the pedestal should be injection moulded in black 30% glass-filled nylon and fitted with

nos. twin wheel castors. the pedestal pitch-center dia should be ∅66.1 ± 0.5 cm (76.1 ± 1.0 cm. with

castors).twin wheel castors: the twin wheel castors should be injection moulded in black nylon.SEAT SIZE:

47.0 cm. (W) x 51.5 cm. (D)BACK SIZE:

The Neckrest assembly consshould be t of polypropylene pad with moulded polyurethane foam & covered

with polyester fabric. Neckrest should be fixed to Back Assembly through Neckrest connector. Neckrest

assembly has height adjustment of 4.2 ± 0.5 cm and rotation adjustment of overall 76°± 2°. The complete

neckrest assembly should be retro fit to the main chair.

TENDER FOR CIVIL/INTERIOR/ELECTRICAL/HVAC WORK FOR SUB REGISTRAR OFFICE JETPUR.

Sr. No. Description Quantity Unit Rate Amount

Direct Bought Out Item MB Staff Chair the seat should be made up of 1.2 ±0.1cm. thick hot-pressed

plywood , upholstered with fabric upholstery covers and moulded polyurethane foam.

seat size: 47.0 cm. (w) x 48.0 cm. (d)back : the back asembly. should be made of powder coated (oft 40-60

microns)tubular frame of 0 2.54 ±0.03cm. x 0.2 ±0.016cm.thk. ms erw tube designed with contoured lumbar

support for extra comfort. the back should be upholstered using double layer spacer mesh fabric with high

back size : 46.5 cm (w) x 60.5 cm (h)high resilience (hr) polyurethane foam: the hr polyurethane foam should

be moulded with density =45+/-2 kg/m3 and hardness load 16 ± 2 kgf for 25% compression.armrests: the one-

piece armrests should be injection moulded from black co-polymer polypropylene. Centre-tilt mechanism: the

mechashould be m should be designed with the following features:

• 360° revolving type.

32 • 17° ±2° maximum tilt on pivot at centre 6.00 NOS 9,200.00

• upright position locking.

tilt tension adjustment. .pneumatic height adjustment: the pneumatic height adjustment has an adjustment

stroke of 11.0 ±0.3cm.elescopic bellow assy: the bellow should be 3 piece telescopic type and injection

moulded in black polypropylene.pedestal .: the pedestal should be injection moulded in black 33% glass-filled

nylon66 and fitted with 5 nos. twin wheel castors. the pedestal should be 66.3 ±0.5cm. pitch-center dia. (76.3

±1.0cm with castors.)twin wheel castors: the twin wheel castors should be injection moulded in black

nylon.Overall Dimensions of Chair-Seat Height - min 43.3 to max 54.3cm.

Height - min 89.5 to max 100.5cm.Width & Depth of Chair as measured from pedestal - Width-76.3 cm and

Pro. And fixing single layer water proof gypsum board 12.5 mm thick sections using water proof board of size

1220 mm x 1830 mm x 8.0 mm suspended by GI suspender channel of size 25 mm x 3 mm with intermediate

channel og size 18 mm x 40 mm x 0.8 mm at 1220 mm center to center ceiling section of size 40 mm x 35 mm x

33 0.55 mm at 457 mm c/c and perimeter channel A of size 20 mm x 27 mm x 30 mm x 0.5 mm at edges & drops 36.76 SQMT 600.94

incl.paper tap sand sofit cleat, anchor fastener, scoch bolt connecting cleat,joining compound top coat on

ceiling incl.making necy.opening for light fitting,diffuser etc. comp. as per detail drawing as directed Grimco

Manager/Architect

Providing and fixing eco-friendly light weight calcium silicate false ceiling tiles having Tegular edge & 15 mm

Thick Densified edges on the Tile Periphery for Extra Strength The Light weight calcium silicate ceiling tiles shall

have , light reflection 85% non-combustible as per B.S. 476 part IV, 100% humidity resistance and also having

thermal conductivity0.043° w/m KC.for the best thermal Insulation . The Light weight calcium Silicate tile shall

be of approved texture Fine fissured/ Spintone/Cosmos having NRC value of 0.5 & Globe having NRC value of

0.75 NRC or equivalent of size 595 X 595 mm to be laid on true horizontal level suspended inter locking metal

grid of hot dipped galvanized steel sections (galvanizing @120 grams per sqm including both side) consisting of

main ‘T’ runner suitably spaced at joints to get required length and size of 24X38mm made from 0.30 mm thick

(minimum) sheet, 1200mm centre to centre, and cross ‘T’ of size 24X28mm made out of 0.33mm (Minimum)

sheet spaced 1200mm along spaced between main ‘T’ at 600mm centre to centre to form agrid of

1200X600mm and secondary cross ’T’ of length 600mm and size 24x28mm made of 0.30 mm thick

(Minimum) sheet to be interlocked at middle of the 1200X600mm panel to form grid of size 600X600mm

34 resting on periphery walls/partitions on a perimeter wall angle pre-coated steel of size (24X24X3000mm made 55.14 SQMT 1,657.57

of 0.40mm thick (minimum) sheet with the help of rawl plugs at 450mm centre to centre with 25mm long dry

wall screws @ 230mm interval and laying 15mm thick

Densified edges light weight calcium silicate ceiling tiles of approved texture (Fine Fissured/Cosmos/Spintone)

in the grid including, cutting /making opening for services

like diffusers, grills, light fittings, fixtures, smoke detectors etc., wherever required, Main ‘T’ runners to be

suspended from ceiling using G.I. slotted cleats of size 25X35X1.6mm fixed to ceiling with 12.5mm dia and

50mm long dash fasteners, 4mm G.I. adjustable rods with galvanized steel level clips of size 85X30X0.8mm,

spaced at 1200mm centre to centre long main ‘T’ bottom exposed with 24mm of all T-sections shall be pre-

painted with polyester baked paint, for all heights, as per

specifications, drawings and as directed by engineer-in-charge.Note:- Only calcium silicate false

ceiling area will be measured from wall to wall. No deduction shall be made for exposed frames/opening (cut

outs) having area less than 0.30 sqm. The calcium silicate ceiling tiles shall have NRC. Value of 0.50 (Minimum)

for Fine fissured/Spintone/Cosmos and 0.75 NRC for Globe, light reflection 85% non-combustible as per B.S.

INTERIOR COLOUR:

Providing & laying of three coats with Royale luxury Emulsion paint of Asian Paint or equivalent approved

brand in shades and colour as directed on wall surfaces to give an even shade incl. scaffolding to at any height

with all labor and material after thoroughly brushing the surface & making free from mortar droppings and

other foreign matter including surface preparation , Existing Paint Removing etc.complete. Including cost of

all type of tools, tackles, all labor, materials, transportation, cleaning , at all floor, all level, all depth, all Height,

35 all lead and lift , performance warranty certificate etc. work complete as per the detailed drawing, approved 294.51 SQMT 260.00

sample, specifications and instruction of Architect/EIC. Sample mock shall be approved from

architect/GRIMCO Manager. The substrate must be sound, clean, dry, free from dust, oil, grease and laitance

etc. All traces of release agents must be removed. On chalky and dusty surfaces, all loose material must be

removed by stiff bristle brushing. The primer / paint application is to be done with the rollers. rate shall be

including crack filling and leveling as per manufacturers specification. .Rate Shall Be Consider All Floor & Work

Shall be Execute as per Architect Grimco Manager Instruction.

Providing and applying synthetic enamel paint (and Repair Grill as per Site Situation-ProperFinishing

Levelling,Welding, Cleaning) of approved brand to previously painted steel work with one coat of approved

quality and brand paint make and of required shade, including cleaning and scrapping the surface with sand

paper etc. complete as directed.

TENDER FOR CIVIL/INTERIOR/ELECTRICAL/HVAC WORK FOR SUB REGISTRAR OFFICE JETPUR.

Sr. No. Description Quantity Unit Rate Amount

Removing Existing AC & Window Grill as per Instruction. & Fixing Existing Grill With Require

37 Hardware,Adhesive Material & Welding with Proper Finish as per Architect/Grimco Manager Instruction. 2.00 each 2,500.00

Providing and fixing Roller Blind fixed on window level on wooden batten and curtain lift with cotton thin

rope, design and colour as per instruction by Grimco Manager/Architect with necessary hardware fitting,

material and labour etc. complete as per detail drawing and instruction of Architect/Grimco Manager.

Cleaning Office Glass, Wall,Window ,Table with Require Material Broom,Dust Pan,Squeegee,Sprey

Cleaner,Mop as per Instruction of the Grimco Manager/Architect.

Signage: Providing & Fixing Signages on Glass/ Partition / Wall Stainless Steel satin finished flat etching plate

of 1.5mm thick. Providing Making and fixing of various in-door signage, as & where basis. sign in ISI Brushed

S.S. Grade 304 letters in English letter + All text and design in acid process, each plates. Each text & design with

40 respective color coated complete plate. The SS mounted on glass or any non holes surfaced by 3M double 0.41 SQMT 1,450.00

sided tape with required chemical process, guidelines by 3M company. Whereas, Any other then glass surface,

SS plate mounted by Two side screws with required grips nd holes on the wall with two SS spacer screws. The

item should be as per instruction at site approved by Architect of Engineer in charge. The rate shall be

inclusive of scaffolding, drilling, adhesive material etc. at all height.

Providing and fixing required size respective brialle lipi signages Stainless steel plate of 1.0mm thickness

with regular printed signage at top in black colour at top part of plate at bottom part the plate, S.S.

41 Plate to be fixed on 10mm thick clear acrylic sheet, this whole assembly to be fixed on wall with four 1.74 SQMT 6,350.00

numbers of SS studs etc complete as per instructions of Architect/GRIMCO Manager.

Providing and fixing ACP Letters for Office Detail on ACP fascia.Providing 3mm thick alluminium composite

panel (ACP) sheet fascia and all side with required iron angle / hollow heavy pipe structure frame. and back

42 side cover up by aliminium sheet ,complete box should be water-proof.and make it . Approx size of the 1.00 job work 22,500.00

Signages is :6'X2'0"X0'8".Outdoor signage: 6 to 8 mm thick & ACP Letters / logo signage Complete as per

Grimco Manager/Architect Instruction.

Direct Bought Out Item Providing , Cutting and Fixing Doormatmade up of synthetic material as per the

approval from the Architect / EIC Basic Rate of Door Mate is 300/- Sqft.

Direct Bought Out Item Providig & Fixing Wall Clock as per approved make. As per instruction at site approved

44 by Architect of Engineer in charge.Installation on Wall/Glass/partition as per Architect/Grimco Manager 2.00 Nos. 1,380.00

Instruction. Basic Rate of Wall Clock is 1200/-

Direct Bought Out Item Providing, supplying SS 304 perforated Dustbin as per approved make. As per

instruction at site approved by Architect and Grimco Manager.Basic Rate of Dustbin Is 950/-

Supplying labour for removing and filling all type Civil /Electrical HVAC of Debric incl. construction waste

46 materials and cleaning or any other type work for 8 hr. per day with all lead & Lift comp. as directed by Grimco 9.00 Job Work 1,900.00

Misc.Civil Work Like Wall Jury,Cut Out & Opening to pass Piping Tray,wire ,pipes & Drain Pipes Including with

Refinishing & Plastering of the Same to the Original Finish.

Providing and erecting Inverter based approved make split air-conditioning unit consisting of condensing unit

with variable speed fan motor, inverter type hermetically sealed rotary compressor with accessories etc. duly

connected separately erected evaporating unit and blower motor with its accessories by means of extra

48 supplied proper insulated copper tubing,drain PVC pipes suitable for ( cost includes Eco Friendly green gas 1.00 nos. 48,519.00

charging and 15A plug top & Remote Control & MS Stand) with necessary core cutting.

(B) for 1.5 ton capacity - Premium Cat.

Providing and erecting Inverter based approved make split air-conditioning unit consisting of condensing unit

with variable speed fan motor, inverter type hermetically sealed rotary compressor with accessories etc. duly

connected separately erected evaporating unit and blower motor with its accessories by means of extra

49 supplied proper insulated copper tubing,drain PVC pipes suitable for ( cost includes Eco Friendly green gas 1.00 nos. 38,722.00

charging and 15A plug top & Remote Control & MS Stand) with necessary core cutting.

(B) for 1.0 ton capacity - Premium Cat.

Providing and erecting Inverter based approved make Cassette type split air-conditioning unit consisting of

condensing unit with fan motor, hermetically sealed scroll/rotary compressor with accessories etc. duly

50 connected separately erected evaporating unit and blower motor with its accessories by Eco friendly Green 2.00 nos 60,984.00

gas charging & Internal copper wiring & Remote control ( 3 star and above of current year) with necessary core

cutting.for 2 ton capacity

Supplying and erecting insulated pair of soft copper tubing open or concealed including power and control

cable,necessary PVC drain pipes for Split AC machine up to 4 TR capacity

Miniature circuit breaker single pole 6A to 32A suitable to operate on 240 V A.C. system and having breaking

capacity 10 KA to be erected in existing box. confirming to IS 8828/1996 with ISI Mark

Providing & erecting 240 V MCB double pole switch for lighting Load (B Curve) having 10 KA breaking capacity

53 & confirms to IS : 8828 in existing box having following capacity 1.00 Nos 276.00

(A) 6 to 32 Amp. Cat-III

Providing & erecting 415V MCB Four Pole Switch for Lighting Load (B curve) having 10KA breaking capacity &

54 confirms to IS :8828 in existing box having following capacity 2.00 Nos 632.00

(b)40 Amp. Cat.III

TENDER FOR CIVIL/INTERIOR/ELECTRICAL/HVAC WORK FOR SUB REGISTRAR OFFICE JETPUR.

Sr. No. Description Quantity Unit Rate Amount

Providing and erecting Sheet Steel powder coated MCB distribution board - flush / surface mounted fitted

with busbar, neutral link, earth bar and DIN rail, confirming to IS 13032 and BS 5486-1986 without MCB to

house appropriate nos. of MCBs.(The DBs should be used of same company of MCB to be used)

(B) three phase incoming and single phase horizontal type outgoing Per phase isolation type (PPI) (b) sheet

steel double door

EARTH LEAKAGE CIRCUIT BREAKERS.

providing and erecting Approved make RCCBs conforming to IS: 12640 and having sensitivity of 30 mA and

Short Circuit withstand capacity of 10 KA and suitable for operation on single phase 240 V,50Hz. having

56 characteristic of quick action & tripping with all advance feature & do not incorporate any electronic 3.00 Nos 2,213.00

component. for following Max. rating erected as directed

(ii) 40Amps. DP

ARMOURED ALLUMINIUM CABLES.

57 Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured cable multistrand Aluminium conductor for 1.1 KV. to 290.00 Mtr. 152.00

be laid on wall with necessary clamps or in existing trench / pipe of following size of cables

d) 4 Core 16 Sq.mm.

Providing and, fixing heavy duty flange type brass cable gland with rubber ring for PVC insulated armoured

cable complete with out going tails, insulating tape etc for following size of cables.

(C) 2 to 4 core 10 Sq. mm

60 d) 2 to 4 Core 16 Sq.mm 6.00 Nos 47.00

Solder less crimping type Aluminium lugs conforming to IS suitable for cable of following size evenly crimped

61 with high pressure tool & connected to switchgear terminals with brass/cadmium plated nut bolts in an 8.00 Nos 13.00

approved manner.

Supplying & erecting carbon dioxide (CO2)/ABC fire extinguisher user of following capacity with necessary

clamps made from 50 x 6 mm M.S. Flat with nut & bolts grouted in wall complete.

[A] For 4.5 Kg Capacity

Point wiring for Light / Bell with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (Green) both are of ISI marked

KV grade FRLS PVC insulated multi strand copper wires up to 10 mtr length , in below type of pipe erected

with 6A Modular type switch / bell push & accessories and earth continuity of following type, erected on PVC

64 / Metallic/Wooden box, single mounting base frame covered with textured/metallic/white front plate 23.00 Pt. 445.00

modules erected on / in wall / ceiling as per pipe erected, with necessary Lamp holder/ceiling rose /

H.D.Connector as directed.

(f) with medium class Rigid PVC pipe and accessories erected concealed in wall/ceiling complete Cat. III

Point wiring for Two Way Controlled Light Point with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (green) both are

of .ISI marked 1.1 KV grade FRLS PVC insulated multi strand copper wires erected in below type of pipe with 6A

Modular type switches and following type of accessories erected on PVC / Metallic/Wooden box, single

mounting base frame covered with textured / metallic/white front plate modules erected on / in wall / ceiling

as per pipe erected. with necessary batten/angle holder or ceiling rose or H.D.Connector as directed.ss will be

considered as Mains for Secondary Point.

(f) with medium class Rigid PVC pipe and accessories erected concealed in wall/ceiling complete Cat-III

Point wiring for secondary light point with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (green) both are of ISI

marked 1.1 KV grade FRLS PVC insulated multi strand copper wires, in below type of pipe to be erected

complete with earth continuity and necessary connection with primary light with accessories erected on

Metal / PVC / wooden box covered covered with appropriate front plate modules erected on / in wall / ceiling

66 for open / concealed wiring. with necessary Lamp holder / ceiling rose / H.D.Connector as directed.as per pipe 23.00 Pt. 166.00

erected with following type of accessories.Note:- Maximum up to 6 mtrs length, excess will be considered as

Mains for Secondary Point.

(f) with medium class Rigid PVC pipe and accessories erected concealed in wall/ceiling complete Cat-III

Point wiring for FAN with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (Green) both are of .ISI marked 1.1 KV Grade

FRLS PVC insulated multi strand copper wires up to 10 mtr length, in below type of pipe erected with 6A

Modular type switch and hum free EME step type electronic fan regulator mounted and accessories with

earth continuity of following type erected on PVC / Metallic/Wooden box, single mounting base frame covered

with textured/metallic/white front plate modules erected on / in wall / ceiling as per pipe erected. with

necessary ceiling rose / H.D.Connector as directed.

(f) with medium class Rigid PVC pipe and accessories erected concealed in wall/ceiling complete Cat-III

TENDER FOR CIVIL/INTERIOR/ELECTRICAL/HVAC WORK FOR SUB REGISTRAR OFFICE JETPUR.

Sr. No. Description Quantity Unit Rate Amount

Point wiring for Individual Plug with & earth wire of 1.5 sq.mm (Green) both are of ISI marked 1.1 KV grade

FRLS PVC insulated multi strand copper wires up to 10 mtr length, in below type of pipe erected complete

with Modular type switch & 5 pin Plug erected on PVC / Metallic/Wooden box covered with appropriate front

plate modules erected on / in wall / ceiling as per pipe erected with following type of accessories.

[I] For 6A Plug and 6 a switch with 2-1.5 sq.mm Cu. Wire from nearby switchboard/mcb db board

(f) with medium class Rigid PVC pipe and accessories erected concealed in wall/ceiling completeCat-III

Point wiring for on board Looped Plug with 6A Modular type switch & 5 pin socket erected on PVC /

69 Metallic/Wooden box, single mounting base frame covered with textured / metallic/white front plate 9.00 Pt. 255.00

modules erected on / in wall / ceiling with following type accessories. Cat.III

Providing following type of Modular Type Accessories mounted with PVC / metallic/Wooden box, single

mounting base frame covered with textured / metallic/white front plate , modules erected with necessary

connections as per site situation directed by Engineer In charge.

(9) 16 Amp. SP one way switch Cat.III

Providing following type of Modular Type Accessories mounted with PVC / metallic/Wooden box, single

mounting base frame covered with textured / metallic/white front plate , modules erected with necessary

connections as per site situation directed by Engineer In charge.

(10) 6/16Amp. Universal socket Cat.III

Providing & erecting Switch board for Computer or electric apparatus consisting of following modular type

accessories mounted with PVC / Metallic concealed/open box with single mounting base frame covered with

textured/metallic /white front plate,modules erected with necessary connections as directed

1 no. 6A/16A universal plug-switch combined.

3 nos. 6A Switch

3 nos. 6A 5 pin Plug

For Modular Type Accessories cat iii

Providing following type of Modular Type Accessories mounted with PVC / metallic/Wooden box, single

mounting base frame covered with textured / metallic/white front plate , modules erected with necessary

connections as per site situation directed by Engineer In charge.

(3) Two Pin/RJ-11 Telephone Socket [A] For One Gang Cat-III

(4) TV Co-axial Socket outlet

(7) Blank Plate Single

(8) Modem Jack for Computer Open RJ-45

77 (19) Modular Indicating Call Bell Cat.III 1.00 EA 326.00

78 (20) Modular Buzzer Cat.III 1.00 EA 148.00

Conduits & Pipes

Providing and erecting ISI mark Medium class RIGID PVC PIPES of following size complete to be erected on/in

79 wall or ceiling erected with necessary PVC fittings & Junction boxes fixed with adhesive solution & Clamps 320.00 Mtr. 24.00

with following dia of pipes, in approved manner as directed

Providing & erecting PVC Corrugated Flexible Conduit with required nos. of coupling, PVC bushes, Check-nuts

82 etc. complete of following sizes. 90.00 Mtr. 17.00

Supplying & erecting UPVC Mini trunking (PVC Casing-n-Capping) having double-locking arrangement with

grooves, trunking of size not below 12.5 mm in height as per IS with accessories of PVC/Resin polypropylene

not below 1.8 mm thick duly sealed in joint & erected on wall / ceiling of following size . (2) 25 mm

Supplying and laying UPVC cable trunking system comprising unplasticised polyvinyl, chloride rigid material

with ignition free and flame proof confirming BS with necessary end caps Internal and external bend, flat

84 bends, coupler, tee etc..All necessary accessories and measuring of following sizes 75.00 Mtr. 187.00

(3) 50 mm x 50 mm trunking

Providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper conductor

wire in following type of pipe to be erected concealed in /flushed on wall/ceiling, with 1.5 sq. mm copper

85 conductor FRLS PVC insulated stranded wire of green colour for earth continuity of following size 415.00 Mtr. 101.00

(a) with medium class Rigid PVC pipe and accessories

(b) 2 wire 2.5 sq. mm

Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper conductor wire in following type of

pipe to be erected in / on wall / ceiling with 2.5 sq. mm copper conductor FRLS PVC insulated stranded wire of

green colour for earth continuity of following size

(a) 2 wire 4 sq. mm

Providing & Erecting approved make following size of TV Co-axial flexible cable comprising inner conductor of

solid bare copper insulated with Foam PE & Secondary conductor made of poly - Aluminium film bonded Al.

Braids @ suitable coverage overall sheathed with black PVC insulation.

TENDER FOR CIVIL/INTERIOR/ELECTRICAL/HVAC WORK FOR SUB REGISTRAR OFFICE JETPUR.

Sr. No. Description Quantity Unit Rate Amount

Supplying & erecting Delton or approved make Telephone Cable electrolytic copper conductor PE insulation

twisted in two pairs, & wrapped with FRLS PVC tape & sheathed with FRLS PVC or HFFR outer Jacket suitable

for telephone wiring & confirming to C-DOT erected in existing pipe. of following size of conductors & nos.of

88 pairs. With necessary connections. 300.00 Mtr. 20.00

A. Conductor Size 0.5 mm

(a) (2) Unarmoured

Supplying & erecting approved make LAN cable of following size in existing pipe as per direction

Providing & erecting main Distribution (MDF) indoor type, back mounted frame

(a) Suitable for 10 pair

Supplying and erecting Of 43 " UHD LED display for CCTV monitoring and checking .(the scope includw the

stand and other necessary accessasory to coplete the job.

CEILING FANS AND ACCESSORIS.

Providing & erecting Approved make Power Saving 50 Watt Ceiling Fan with double ball bearing ISI mark with

92 Condenser 230 volt A.C. 50 Hz 1200 mm sweep complete having 3blades with aluminium blades with , 8.00 Nos 1,929.00

canopy & 30 cm. down rod erected with earthing.(Make shall be approved by Engineer in charge))

TABLE FANS, EXHAUST FANS & ACCESSORIES.

93 Supplying & erecting approved make low noise decorative exhaust fan having size 200mm with 1350 RPM with 1.00 Nos 1,687.00

square frame ABS body with inbuilt lowers & square frame.

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt assembled on single

MCPCB, with housing used as a heat sink shall be made of thick sheet Steel conforming to IS: 513/CRCA

polyester powder coated and high U.V. & corrosion resistance with diffuser and/or Polycarbonate optics with

company mark/name

120 to 300 V,Power Factor more than 0.9, THD < 10 %,

94 CCT 4000 K to 6500K, Uniformity ratio >0.7, 2.00 Nos 370.00

Luminaire efficiency> 85 lumens/watt

LED driver efficiency > 85 %

CREE / OSRAM / PHILIPS Lumileds / NICHIA / SEOUL/Bridgelux(U.S.A.) make LED used for luminaire. (Each

fitting required LM-79 & LM-80 Certificates)

(A) Tube Light with integral/ non-integral driver

(d) 22-24 Watts, Surge - 4KV,IP-20, 4 feet

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt assembled on single

MCPCB, with housing used as a heat sink shall be made of thick sheet Steel conforming to IS: 513/CRCA

polyester powder coated and high U.V. & corrosion resistance with diffuser and/or Polycarbonate optics with

company mark/name

120 to 300 V,Power Factor more than 0.9, THD < 10 %,

95 CCT 4000 K to 6500K, Uniformity ratio >0.7, 46.00 Nos 584.00

Luminaire efficiency> 85 lumens/watt

LED driver efficiency > 85 %

CREE / OSRAM / PHILIPS Lumileds / NICHIA / SEOUL/Bridgelux(U.S.A.) make LED used for luminaire. (Each

fitting required LM-79 & LM-80 Certificates)Square/ Circular Surface/Recessed Mounted Downlight/Hanging

with provision for spring loaded mounting clips complete.(b) 11-15 watts, Surge-4 KV Cat III

Providing and erecting required size HOT deep Galvanised iron strip for earthing of H.T. , OCB/ ACB/

Transformer LT panel board, Motors etc. using proper clamp.

97 Providing and erecting Annealed bare Copper wire 8 to 16 SWG. 5.00 kg 787.00

Conduits & Pipes

Providing and erecting ISI mark Medium class RIGID PVC PIPES of following size complete to be erected on/in

98 wall or ceiling erected with necessary PVC fittings & Junction boxes fixed with adhesive solution & Clamps 310.00 Mtr. 24.00

with following dia of pipes, in approved manner as directed

(8) Modem Jack for Computer Open RJ-45

Supplying & erecting approved make LAN cable of following size in existing pipe as per direction

101 Removing all Electrical Material / equipment from existing set up with proper safety mejors and also handover 1.00 job 6,500.00

to client representative / PMC / Architect team as per them requirement

102 Re use the electrical material as per Client's epresentative / architect team 's instruction 1.00 job 6,500.00

Supplying & Erecting floor mounted/ table top single phase 50Hz water dispenser with SS 304 food grade cold

tank specification having three water tap of hot/cold/ambient water function, LED display with storage

capacity from 2.5 Ltrs to 3.2 Ltrs, cooling capacity 2.5ltrs/hr, including refrigerant with 20ltrs refrigerant

storage capacity compartment inclusive 1No.water topping bottle

TENDER FOR CIVIL/INTERIOR/ELECTRICAL/HVAC WORK FOR SUB REGISTRAR OFFICE KODINAR.

Sr. No. Description Quantity Unit Rate Amount

Demolition of existing Civil Work, Interior, ELV,MEP, HVAC & electrical work including stacking of serviceable

1 materilas and disposal of unserviceable materials with all lead and lift as per Instruction of Architect/Grimco 1.00 Lumsum 10,500.00

Excavation for foundation in any kind of soil incl. sand, soft or hard marum, soft or hardrock, hardened, RCC or

asphalted surface 0 to 3.00 mt depth incl. dewatering if required at cost and risk of agency incl. shoring,

struting, making the bottom level and sides in plumb incl. watering, raming and consolidating the bottom etc.

incl. removing the surplus stuff and black cotton soil if any within all lead and lift using the selected stuff for

back filling to foundation, in side trencehs and plinth in layers of 20 cms. th. with watering, consolidating etc.

comp. as directed.

3 (B) 1.50 to 3.00 mtr depth (Dense or Hard soil) 1.94 CMT 287.44

Filling in foundation and plinth with murrum or selected soil in layers of 20cm. thickness including watering,

ramming and consolidating etc. complete. (Payment shall be made as per level basis)

Provdg. & laying cement concrete 1:2:4 (1cement:2 corse sand :4 hand broken stone aggregate 20 mm

5 nominal size) and curing complete including cost of formwork etc. comp. as directed.(A) Foundation and 3.65 CMT 3,720.98

Providing, laying controlled cement concrete M 250 and curing complete including the cost of form work but

excluding reinforcement for reinforced concrete work in: Up to Plinth Level. (A) Footing

Providing, laying controlled cement concrete M 250 and curing complete including the cost of form work but

excluding reinforcement for reinforced concrete work in: Up to Plinth Level.(C) Column

Providing and laying controlled cement concrete M.250 and curing complete excluding the cost of formwork

8 and reinforcement for reinforced concrete work in (C) Slabs, landing,shelves,Balconies, Lintels, Beams, 3.41 CMT 5,171.00

Girders and Cantilever upto floor two level.

Providing TMT FE - 500/500 D bar reinforcement for R.C.C. work including bending binding and placing in

9 position complete. Rate Shall Be Consider All Floor & Work Shall be Execute as per Architect Grimco Manager 732.57 KG 75.46

Supplying, fabricating and erecting at site of work tubular steel structure using minimum 10 g. M.S. pipe of

various dia of approved brand like TATA, Zindal or equivalent for columns, trusses, rafters, purlins, bolts, nuts,

foundation bolts, runners, wind bracings etc. as per detailed drawing & design with brackets, gusset plates,

10 base plates, top plates, cleats, stiffners for fixing 8 mm th. roof sheet incl. cutting, bending, drilling holes and 4470.66 kG 110.00

welding work as per ISS incl. supplying nuts, bolts of required size incl. providing one coat of approved anti-

corrosive paint & two coats of approved oil paint etc. comp. as directed.

Providing and fixing Pre Painted Galvenlium Iron (PPGI) Sheet high tensile steel profile roofing steel of TATA

Durashine or JSW make in total coated 0.50 mm th. and having tensile strength 550 mpa in approved colour,

size, shape, depth, pitch of corrugation. The roofing sheets shall be fixed with polymer coated G.I. "J" or "L"

hooks, bolts and nuts 8 mm dia. with bitumen & GI limpet washer filled with white lead complete excluding

the cost of purlin, rafters and trusses complete. No extra payment shall be made of overlaps etc. comp. as

directed by engg. in charge.

Providing Brick masonary using common burnt clay building bricks for foundation and plinth having crushing

12 strength not less than 35 kg./ Sq. Cm. in Cement Mortar 1:6 (1- Cement : 6 -fine sand) incl. 15.84 CMT 4,447.91

watering,curing,scaffolding and racking out joints etc. comp as per directed by eng. incharge.Foundation

MASONARY WORK: Half brick masonry in common brunt clay building bricks having crushing strength not less

13 than 35 Kg/Sq.Cm. in Cement mortar 1:4 (1-Cement :4 -coarse sand) in (Conventional) Rate Shall Be Consider 2.16 SQMT 679.00

All Floor & Work Shall be Execute as per Architect Grimco Manager Instruction.

Providing 15 mm thick cement plaster in single coat on wall for interior plastering and finished even and

smooth in cement mortar 1:4 ncl. finishing with a floating coat of neat cement slurry. (1 cement : 4 fine sand )

1) 15mm Plaster

Providing and applying Gypsum plaster Work minimum 10 to 12 mm thick in Wall and minimum 6 to 8 mm

thick in ceiling , including all labors, tools, tackles, scaffolding, surface preparation, mixing of material,

transportation (lead & lift) applying in position, Levelling, finishing, cleaning etc. complete to satisfaction of

EIC. The rate also include making of grooves above skirting, dado tiles and around window and door jambs etc.

(cost of Bonding agent to the ceiling or RCC surfaces is to be included in the item)as per instruction of

architect/GRIMCO Manager.

Providing and laying granite 18mm thick in jame seal of door window laid on a bed of 10mm thick cement

mortar 1:4 (1-cement : 4-coarse sand) with suitable Chemical as per eng. incharge instruction finishing with

flush pointing incl. rounding the outer edge, moulding,polishing etc comp as per directed by eng incharge.

Prov. & laying Digital 24" x 24" Full Body mat Finish/Glossy Finish Vitrified 8 mm to 9 mm thick tiles

flooring/Matching With Existing Tiles laid on bed of 20mm (Average) base of Cement Mortar 1:6 (1-Cement :

17 Coarse Sand) on new surface/Old Surface and jointed with colour cement slurry including with 4 mm Epoxy 25.25 SQMT 1,450.00

finished with flush pointing & cleaning the surface etc. completed of any shade approved by Grimco

Manager/Architect.

Prov. & laying Digital 24" x 24" Full Body mat Finish/Glossy Finish Vitrified 8 mm to 9 mm thick tiles Skirting

/Matching With Existing Tiles laid on bed of 20mm (Average) base of Cement Mortar 1:6 (1-Cement : 6 Coarse

18 Sand) on new surface/Old Surface with 4 mm Epoxy and jointed with colour cement slurry including finished 29.68 SQMT 1,550.00

with flush pointing & cleaning the surface etc. completed of any shade approved by Grimco

Manager/Architect.

Providing & Fixing Handicape Tractile Tiles (Shelf Adhesive) The Tiles shall be Fixed with Suitable Adhesive/

Scrue Material with All required Additional Hardware Suppot or Tiles laid on bed of 20mm (Average) base of

Cement Mortar 1:6 (1-Cement : 6 Coarse Sand) on new surface/Old Surface with 4 mm Epoxy and jointed with

colour cement slurry including finished with flush pointing & cleaning the surface et. Rate shall be Including

Transportation , All Floor , Hardware, Adhesive Material etc as per Architect/GRIMCO manager Instruction.

TENDER FOR CIVIL/INTERIOR/ELECTRICAL/HVAC WORK FOR SUB REGISTRAR OFFICE KODINAR.

Sr. No. Description Quantity Unit Rate Amount

Removing the Concrete & Concrete Cover by chipping off the concrete at the places and in the manner and

upto the depth, in regular shape as advised by the Architects at site without damaging the reinforcement &

adjoining RCC so as to expose the existing reinforecement bars for welding & tieing with the new

reinforecement bars, cleaning & making the exposed surface free from all loose materials, dust, greese, oil,

20 impurities etc using suitable powered & manual devices such as cutter, drilling machine, chisel and light 5.10 SQMT 900.00

hammering, wire & jute brushs, air blowing, water jetting etc., carting away & final disposal of debries etc out

of the premises as per specifications & as directed by the Architects / Bank to their satisfaction (Actual

exposed flat surface area shall be measured for payment.)Rate Shall Be Consider All Floor & Work Shall be

Execute as per Architect Grimco Manager Instruction.

Providing & Fixing Handicape Wheel Chair as per Architect/GRIMCO Manager Instruction.Basic Rate Rs :

Providing & fixing S.S. Pipe railing of 75mm dia pipe not less than 18guage, in 3 rows supported Horizontally

by S.S.304 Pipe of 50mm dia at every corners & 1.5 mt C/C incl. concrete block (0.35 X 0.35 X 0.35) incl.

guage S.S. sheet using required cutting, jointing, Hardware, welding, threading, drilling & fixing etc. comp. as

directed as per drawing as per Architect/Grimco Manager Instruction.

Dry Wall Full ht Partition 75mm thick with aluminium framework with 12mm thk mdf exterior grade / 12mm

thick hdf finish on both sides Providing and fixing full height / half height double skin wooden partition upto

ceiling or beam bottom as per drawing and framing in plywood /Alluminium Framing with both side cover

with 12mm thick comm. ply finished both Side with 1.0mm thick selected laminate,OR (mdf(8 mm ply with

23 mm MDF with Selected Paint)) without any air gap and grooving as per design& instruction of the 27.97 SQMT 5,150.00

EIC/Architect. wooden framing to be erected above false ceiling.No extra cost to be paid for the same Before

installation, make hole/face plate for conduit pipes of electrical / networking cables with openable stud from

partition Including all materials and labour etc. Open edges also finish with laminate. complete as per detail

drawing and instruction of Architect/engineer-in charge.

Glass Window: Providing and fixing of full /Partly glazed 12mm thk toughed glass partition/Door, Providing

and fixing full height glass partition made out of glazed partition with stanless steel U channel profile in the

top and Bottom with 10mm thick clear toughened glass fixing with Plywood box with Laminate Finish for

Support top/Bottom/Both side as per EIC /Arch. Instruction filled with The glass to be butt jointed with 2 to

24 mm edge chamfer and edge polishing all around. Distance between two butt jointed glass panels not to 1.80 SQMT 4,900.00

exceed 4mm. for Top/Side Support Make Plywood Box with Laminate Finish as per Grimco

Manager/Architect and Door Three Side Make 0.30 m Wide Frame For Support as per Instruction.Edges and

grooves between glass panels to be filled with clear silicon sealant of approved make neatly applied as

indicated in the drawing. As per the sample approved by the Architect/Grimco Manager , including all

Providing and fixing window having extruded aluminum Colour anodized section frame main outer size 95mm

x 24mm x 1.17mm @ wt.of 0.738 Kg/mt , horizontal Three track member size 92mm x 31.75mm x 1.30mm,@

Wt.1.07 Kg/mt , vertical member of size 92mm x 31.75mm x 1.50mm @ Wt. 1.06 Kg/mt with sliding shutters of

25 horizontal member size 40 mmx18mm x1.29mm @ wt.of 0.456 Kg/mt, vertical member of size 40mm x 18mm 9.00 SQMT 1,696.73

x 1.29 mm @ wt.of 0.456Kg/mt/ with 5 mm thick transparent bronze colour tinted float glass with powder

coated aluminum fittings

and fixtures and transparent silicon sealant glass fixing to frame as per details etc

Providing and fixing double skin Acoustic wooden partition upto ceiling or beam bottom as per drawing and

framing in plywood /Alluminium Framing with both side cover with 12mm thick comm. ply finished both Side

with 1.0mm thick selected laminate,OR (mdf(8 mm ply with 4 mm MDF with Selected Paint)) without any air

gap and grooving as per design& instruction of the EIC/Architect. wooden framing to be erected above false

ceiling.No extra cost to be paid for the same Before installation, make hole/face plate for conduit pipes of

electrical / networking cables with openable stud from partition Including all materials and labour etc. Open

26 edges also finish with laminate. complete as per detail drawing and instruction of Architect/engineer-in 19.87 SQMT 5,600.00

charge.Providing and fixing acoustic wall paneling 10 mm Thick Exposed Acoustic Panel with 2000gm/Sq.M

Density, 100% Polyester Fiber with 0.60 to 0.90 NRC Acoustic Performance material. with Design to create

sound insulation effect. top surface covering paneling to create C groove of 9 mm deep. All grooves are

finished with paint. as instructed as per Architect/GRIMCO Manager. Complete with all hardware's like nails, ss

screws, adhesives etc. Shown in detail drawings. Contractor has to provided all necessary cut outs for Electrical

works & no extra payment shall be made for it.

Providing and fixing Floor Spring 120 kg Load Adjustable,Maximum Door Width 1000 mm,Maximum Opening

27 angle 130 Degree, 90 Degree Hold open in Both Direction as per Architect & EIC Instruction.Rate Shall be 1.00 Nos 4,800.00

Including Fitting Charge.

Providing and fixing Blue Space GPRH Solid Standoffs Heavy-Duty Commercial Grade-304 Stainless Steel Push

28 Pull Door Handle - 18 Inch as per Architect & EIC Instruction.Rate Shall be Consider In Pair. Including Fitting 1.00 Nos 1,600.00

Providing ,Removing Existing Door Closer and fixing Door Closer and Blue Space Solid Standoffs Heavy-Duty

29 Commercial Grade-304 Stainless Steel Push Pull Door Handle Rate Shall be Including Fitting Charge. as per 1.00 Nos 2,800.00

Architect & Grimco Manager Instruction.

TENDER FOR CIVIL/INTERIOR/ELECTRICAL/HVAC WORK FOR SUB REGISTRAR OFFICE KODINAR.

Sr. No. Description Quantity Unit Rate Amount

FULLY SOLID / PARTLY GLAZED DOOR Providing & fixing 32 to 35 mm Flush Door With Both Side Laminate .fully

solid / Partly glazed flush door with Laminate finished door as shown in the drg. Size of each door shall be as

per the dimensions given in the drawing. Door shall consist of approved make 8mm thk. clear float glass / MS

powder finish perforated grill pre-fitted if Require with necessary hardware for smooth swinging action. The

edge of the shutter should be surrounded with Paint. Rate shall include necessary approved locking systems,

30 SS Handle pair, floor springs / Door closer (Heavy duty or equivalent), gaskets, knob, stopper & miscellaneous 3.78 SQMT 5,800.00

hardware items. Including all materials and labour etc. complete as per detail drawing and instruction of

engineer-in charge and consultant. The solid doors shall be supplied with first class ghana teak wood frame of

125 x 75mm finished size with necessary grooves, wroght framed & fixed in position with MS hold fast, frame

finished by monocoat polish.Size of each door shall be measurement as per drawing.

Door Laminate Change. To be Removed & Refixing .Providing and Fixing Both Side 1 mm laminate & Existing

Removing Laminate Door of washable type material of good quality with appropriate adhesive of approved

quality like fevicol or its equivalent brands with smooth finishing and in line level with regular edges as per

requirement and site situation incl. cutting and any necessary cut outs of Glass and Cutout Finish With

Plywood With Selected Laminate & Door if any required etc. comp. in all respects. All rates are inclusive of

hardware like, nails, screws, abro taps, adhesive etc. complete.

Providing & Fixing Wooden Vertical Stand for Standing Plateform Support 600 X 1200 mm center to Center

Distance with 19 mm Plywood With Laminate/ Paint and above Standing Plateform Made 19 mm Plywood

With Selected Laminate Outer All Exposed Part Shall be Fitted 18 mm Plywood With Laminate with Adhesive

Material , Nail Scrue Abro tap Etc all Required Hardware.

Providing & fixing 18mm thick cement sheet/18 mm Plywood for panelling work with Selected Colour as per

approved by Architect/Client. The rate shall be for all floors, at all heights, all shapes including CNC /

Engraving and all costs.

The frame work shall be made from square hollow aluminum anodized section size of 50x50x1.5 mm &

25x50x1.5 mm of approved make conforming to IS code. The framework shall be fixed as per drawing vertically

@ 600 mm c/c & horizontal 600 mm c/c horizontally. which shall be provided from gr. level to RCC slab /

beams soffit level. Rates shall also be inclusive of cost of making CNC/engraving /cut outs/ openings for

33 electrical fixtures, tube lights /air-conditioners ,grills, diffusers etc & providing additional sections for 6.72 SQMT 4,500.00

strengthening around the openings/cutouts additional support for fixing of patch fittings for doors, making

grooves between wall & board, in filled with termite treated members if required or as per drawing

/instruction of EIC. All curved surfaces, recesses, waffles shall be part of the paneling including Openable

shutter wherever required area and finished with the same material. Work complete including all type of

material, fittings , fixtures, Finish, loading , unloading , transportation, all leads ,accessories, groove, adhesive

,tape, headless nails, sample mockup, all floor , all levels, all heights etc complete as per detailed drawings

,specifications & instruction of Client/EIC.sample mock shall be approved from as per Architect/GRIMCO

Manager &instruction.

Ply palmet work : Providing and fixing wooden pelmets of upto 150mm/950 mm x 150 to 600 mm L shape

made of 19mm thick ply as per IS 303 MR Grade and beading of 4mm thick and 25mm wide Ghana Teak wood

for curtains/ blinds/projection screen of openings. Rate to be inclusive of lipping, cutting, wastages, necessary

34 fixtures, nails, adhesives, necessary scaffolding, fixing at all heights and for all floors as per drawing and 3.66 Rmt 3,200.00

approved sample etc finish with veneer semi gloss PU finsh. (Mode of Measurements: Only the palmet length

shall be measured & paid for the items in which palmet work is not inclusive in item description)

Providing office table of required size and height 75 cm.Table top in required shape to be made from 19mm

ply with 1. mm thick laminate . Base to be made from 19mm thick ply with 1. mm thick laminate on outer side

and rear surface, including providing drawers & Shutter,Keyboard Tray,Apron as per given design, teak wood

wood beading as per requirement and Providing Laminate on inside surface as per Architect/Grimco Manager

Side Table (0.9 x 0.45 x 0.75)

Providing 19 mm Ply With Laminate on Side table.top in required shape to be made from 18mm Plywood post

36 With lamineted board structure , Back Side 12 mm Plywood With Laminate. providing Shutters ,Shelves as per 1.00 Nos. 9,500.00

given design. Providing Laminate on inside/Outside surface.as per Architect/Grimco Manager Instruction.

Providing office table of required size and height 75 cm.Table top in required shape to be made from 19mm

ply with 1. mm thick laminate . Base to be made from 19mm thick ply with 1. mm thick laminate on outer side

and rear surface, including providing drawers & Shutter,Keyboard Tray,Apron as per given design, teak wood

wood beading as per requirement and Providing Laminate on inside surface as per Architect/Grimco Manager

Perforated waiting... Providing and Fixing Three Seater made of black powder coated regular MS ERW tube

having 8.0+/-0.03 cm x 4.0 +/- .03 cm x 0.2 +/-0.014 cm size.Providing & Fixing Cushionon Seating & Back as per

Instruction. The Shell to be assembled on the cross beam with help of M8 Bolts. Legs to be chrom plated made

of rolled steel with 0.12 +/- 0.013 cm thinkness.Seat and Back Shell to be peforated made from cold rolled M.S.

Sheet (DIN 1623 Part 1 ST -12 Grade), 0.14 +/- 0.013 cm thickness. The side Bar is made of chrome Plate solid

steel 3.0 cm +/- 0.03cm x 1.2 cm +/-0.03 cm with fluting and plastic inserts. Rate Shall be Including

Transportaion, Loading,all Taxes. Install as per Architect/Grimco Manager Instruction.

TENDER FOR CIVIL/INTERIOR/ELECTRICAL/HVAC WORK FOR SUB REGISTRAR OFFICE KODINAR.

Sr. No. Description Quantity Unit Rate Amount

Perforated waiting... Providing and Fixing Three Seater made of black powder coated regular MS ERW tube

having 8.0+/-0.03 cm x 4.0 +/- .03 cm x 0.2 +/-0.014 cm size. Legs to be chrom plated made of rolled steel with

0.12 +/- 0.013 cm thinkness.Seat and Back Shell to be peforated made from cold rolled M.S. Sheet (DIN

39 Part 1 ST -12 Grade), 0.14 +/- 0.013 cm thickness. The side Bar is made of chrome Plate solid steel 3.0 cm +/- 3.00 Nos 17,000.00

0.03cm x 1.2 cm +/-0.03 cm with fluting and plastic inserts. Rate Shall be Including Transportaion, Loading,all

Taxes. Install as per Architect/Grimco Manager Instruction.

Storage.Providing 19 mm Ply With Laminate on Side table.top in required shape to be made from 18mm

Plywood post With lamineted board structure , Back Side 12 mm Plywood With Laminate. providing Shutters

,Shelves as per given design. Providing Laminate on inside/Outside surface.as per Architect/Grimco Manager

Direct Bought Out Item: HB CHAIR Adj. Arms Larger Seats seat size: 47.0 cm. (w) x 51.5 cm. (d) back size :45.0

cm. (w) x 65.3 cm. (h)high resilience (hr) polyurethane foam: the hr polyurethane foam should be moulded

with density =55+/-2 kg/m³ and hardness 16 ± 2 kgf for 25% compression. armrests : the armrests have an up-

down adjustment of 8.5 ± 0.5cm which should be provided in armrest structure. armrest top has an integrated

layer of thermoplastic elastomer (tpe).

lumbar support assembly: the lumbar support consshould be ts of polypropylene pad with moulded

polyurethane foam & covered with polyester fabric. the height of lumbar pad can be adjusted through two

projecting knobs provided on the rear side of the pad. lumbar pad has an adjustment of 8.0 ± 0.5 cm in height.

front pivot synchro mechanism: the adjustable tilting mechanism should be designed with the following

• 360° revolving type.

• single point control.

41 • front-pivot for tilt with feet resting on ground ensuring more comfort. 1.00 NOS 14,000.00

• tilt tension adjustment.

• 4-position locking with anti-shock feature.

• seat/back tilting ratio of 1:2.

pneumatic height adjustment: the pneumatic height adjustment has an adjustment stroke of 10.0 ± 0.3 cm.

pedestal assembly: the pedestal should be injection moulded in black 30% glass-filled nylon and fitted with

nos. twin wheel castors. the pedestal pitch-center dia should be ∅66.1 ± 0.5 cm (76.1 ± 1.0 cm. with

castors).twin wheel castors: the twin wheel castors should be injection moulded in black nylon.SEAT SIZE:

47.0 cm. (W) x 51.5 cm. (D)BACK SIZE:

The Neckrest assembly consshould be t of polypropylene pad with moulded polyurethane foam & covered

with polyester fabric. Neckrest should be fixed to Back Assembly through Neckrest connector. Neckrest

assembly has height adjustment of 4.2 ± 0.5 cm and rotation adjustment of overall 76°± 2°. The complete

neckrest assembly should be retro fit to the main chair.

Direct Bought Out Item MB Staff Chair the seat should be made up of 1.2 ±0.1cm. thick hot-pressed

plywood , upholstered with fabric upholstery covers and moulded polyurethane foam.

seat size: 47.0 cm. (w) x 48.0 cm. (d)back : the back asembly. should be made of powder coated (oft 40-60

microns)tubular frame of 0 2.54 ±0.03cm. x 0.2 ±0.016cm.thk. ms erw tube designed with contoured lumbar

support for extra comfort. the back should be upholstered using double layer spacer mesh fabric with high

back size : 46.5 cm (w) x 60.5 cm (h)high resilience (hr) polyurethane foam: the hr polyurethane foam should

be moulded with density =45+/-2 kg/m3 and hardness load 16 ± 2 kgf for 25% compression.armrests: the one-

piece armrests should be injection moulded from black co-polymer polypropylene. Centre-tilt mechanism: the

mechashould be m should be designed with the following features:

42 • 360° revolving type. 5.00 NOS 9,200.00

• 17° ±2° maximum tilt on pivot at centre

• upright position locking.

tilt tension adjustment. .pneumatic height adjustment: the pneumatic height adjustment has an adjustment

stroke of 11.0 ±0.3cm.elescopic bellow assy: the bellow should be 3 piece telescopic type and injection

moulded in black polypropylene.pedestal .: the pedestal should be injection moulded in black 33% glass-filled

nylon66 and fitted with 5 nos. twin wheel castors. the pedestal should be 66.3 ±0.5cm. pitch-center dia. (76.3

±1.0cm with castors.)twin wheel castors: the twin wheel castors should be injection moulded in black

nylon.Overall Dimensions of Chair-Seat Height - min 43.3 to max 54.3cm.

Height - min 89.5 to max 100.5cm.Width & Depth of Chair as measured from pedestal - Width-76.3 cm and

Pro. And fixing single layer water proof gypsum board 12.5 mm thick sections using water proof board of size

1220 mm x 1830 mm x 8.0 mm suspended by GI suspender channel of size 25 mm x 3 mm with intermediate

channel og size 18 mm x 40 mm x 0.8 mm at 1220 mm center to center ceiling section of size 40 mm x 35 mm x

43 0.55 mm at 457 mm c/c and perimeter channel A of size 20 mm x 27 mm x 30 mm x 0.5 mm at edges & drops 24.63 SQMT 600.94

incl.paper tap sand sofit cleat, anchor fastener, scoch bolt connecting cleat,joining compound top coat on

ceiling incl.making necy.opening for light fitting,diffuser etc. comp. as per detail drawing as directed Grimco

Manager/Architect

TENDER FOR CIVIL/INTERIOR/ELECTRICAL/HVAC WORK FOR SUB REGISTRAR OFFICE KODINAR.

Sr. No. Description Quantity Unit Rate Amount

Providing and fixing eco-friendly light weight calcium silicate false ceiling tiles having Tegular edge & 15 mm

Thick Densified edges on the Tile Periphery for Extra Strength The Light weight calcium silicate ceiling tiles shall

have , light reflection 85% non-combustible as per B.S. 476 part IV, 100% humidity resistance and also having

thermal conductivity0.043° w/m KC.for the best thermal Insulation . The Light weight calcium Silicate tile shall

be of approved texture Fine fissured/ Spintone/Cosmos having NRC value of 0.5 & Globe having NRC value of

0.75 NRC or equivalent of size 595 X 595 mm to be laid on true horizontal level suspended inter locking metal

grid of hot dipped galvanized steel sections (galvanizing @120 grams per sqm including both side) consisting of

main ‘T’ runner suitably spaced at joints to get required length and size of 24X38mm made from 0.30 mm thick

(minimum) sheet, 1200mm centre to centre, and cross ‘T’ of size 24X28mm made out of 0.33mm (Minimum)

sheet spaced 1200mm along spaced between main ‘T’ at 600mm centre to centre to form agrid of

1200X600mm and secondary cross ’T’ of length 600mm and size 24x28mm made of 0.30 mm thick (Minimum)

sheet to be interlocked at middle of the 1200X600mm panel to form grid of size 600X600mm resting on

44 periphery walls/partitions on a perimeter wall angle pre-coated steel of size (24X24X3000mm made of 36.95 SQMT 1,657.57

0.40mm thick (minimum) sheet with the help of rawl plugs at 450mm centre to centre with 25mm long dry

wall screws @ 230mm interval and laying 15mm thick Densified edges light weight calcium silicate ceiling tiles

of approved texture (Fine Fissured/Cosmos/Spintone) in the grid including, cutting /making opening for

like diffusers, grills, light fittings, fixtures, smoke detectors etc., wherever required, Main ‘T’ runners to be

suspended from ceiling using G.I. slotted cleats of size 25X35X1.6mm fixed to ceiling with 12.5mm dia and

50mm long dash fasteners, 4mm G.I. adjustable rods with galvanized steel level clips of size 85X30X0.8mm,

spaced at 1200mm centre to centre long main ‘T’ bottom exposed with 24mm of all T-sections shall be pre-

painted with polyester baked paint, for all heights, as per specifications, drawings and as directed by engineer-

in-charge. Note:- Only calcium silicate false ceiling area will be measured from wall to wall. No deduction shall

be made for exposed frames/opening (cut outs) having area less than 0.30 sqm. The calcium silicate ceiling

tiles shall have NRC. Value of 0.50 (Minimum) for Fine fissured/Spintone/Cosmos and 0.75 NRC for Globe, light

reflection 85% non-combustible as per B.S. 476 part IV, 100% humidity resistance and also having thermal

INTERIOR COLOUR:

Providing & laying of three coats with Royale luxury Emulsion paint of Asian Paint or equivalent approved

brand in shades and colour as directed on wall surfaces to give an even shade incl. scaffolding to at any height

with all labor and material after thoroughly brushing the surface & making free from mortar droppings and

other foreign matter including surface preparation , Existing Paint Removing etc.complete. Including cost of

all type of tools, tackles, all labor, materials, transportation, cleaning , at all floor, all level, all depth, all Height,

45 all lead and lift , performance warranty certificate etc. work complete as per the detailed drawing, approved 203.04 SQMT 260.00

sample, specifications and instruction of Architect/EIC. Sample mock shall be approved from

architect/GRIMCO Manager. The substrate must be sound, clean, dry, free from dust, oil, grease and laitance

etc. All traces of release agents must be removed. On chalky and dusty surfaces, all loose material must be

removed by stiff bristle brushing. The primer / paint application is to be done with the rollers. rate shall be

including crack filling and leveling as per manufacturers specification. .Rate Shall Be Consider All Floor & Work

Shall be Execute as per Architect Grimco Manager Instruction.

Providing and applying synthetic enamel paint (and Repair Grill as per Site Situation-ProperFinishing

Levelling,Welding, Cleaning) of approved brand to previously painted steel work with one coat of approved

quality and brand paint make and of required shade, including cleaning and scrapping the surface with sand

paper etc. complete as directed.

Removing Existing AC & Window Grill as per Instruction. & Fixing Existing Grill With Require

Hardware,Adhesive Material & Welding with Proper Finish as per Architect/Grimco Manager Instruction.

Providing and fixing Roller Blind fixed on window level on wooden batten and curtain lift with cotton thin

rope, design and colour as per instruction by Grimco Manager/Architect with necessary hardware fitting,

material and labour etc. complete as per detail drawing and instruction of Architect/Grimco Manager.

Cleaning Office Glass, Wall,Window ,Table with Require Material Broom,Dust Pan,Squeegee,Sprey

Cleaner,Mop as per Instruction of the Grimco Manager/Architect.

Signage: Providing & Fixing Signages on Glass/ Partition / Wall Stainless Steel satin finished flat etching plate

of 1.5mm thick. Providing Making and fixing of various in-door signage, as & where basis. sign in ISI Brushed

S.S. Grade 304 letters in English letter + All text and design in acid process, each plates. Each text & design with

respective color coated complete plate. The SS mounted on glass or any non holes surfaced by 3M double

50 sided tape with required chemical process, guidelines by 3M company. Whereas, Any other then glass surface, 0.20 SQMT 1,450.00

SS plate mounted by Two side screws with required grips nd holes on the wall with two SS spacer screws. The

item should be as per instruction at site approved by Architect of Engineer in charge. The rate shall be

inclusive of scaffolding, drilling, adhesive material etc. at all height.

Providing and fixing required size respective brialle lipi signages Stainless steel plate of 1.0mm thickness

with regular printed signage at top in black colour at top part of plate at bottom part the plate, S.S.