Tender for Electrical maintenance at Piplod Division office and all sub division of Piplod Division.

Work of Electrical maintenance at Piplod Division office And all subdivision of Piplod

No Particulars Rate. Per.

Providing and Fixing of Fan Hook fitting etc. as

P&F new fan pipe 2 feet long or required length with

2 twin core flexible wire copper wire fitting etc. completed 120 No

as per inst. Of EIC

P&F 16A-32A MCB breaker approved make for lighting

& A.C. 7 computers etc. completed as per inst. Of EIC.

P&F A/C starter 32Amp. 250Volts heavy duty North

4 East, Gelco or equivalent brand etc. Completed per 800 No

P &F LED 4ft. 22 watt Tube light ISI marked of

5 approved make Crompton/Philips/Havelles with 2 year 560 No

P&F NORTH-WEST (WIPRO), LEGRAND,

CRABTREE ,etc. or approved brand electronics Fan

regulator 6 position with 360 rotation ISI marked etc.

complete as instruction of EIC

Repairing of exhaust fan with removing from wall fitting

7 providing & Fixing rewinding coils, replacement of

bushes with other minor repairing etc. completed as

per inst. Of EIC.

P&F new door call bell incl. removing burnt bell from

fitting etc. completed.

P&F as per describe in item 1 Wall fan 400mm size

9 (like Crompton/Anchor/Havelles and equivalent to 3105 No

Removing & Repairing single phase motor monoblock

10 incl. winding & rewinding of burnt motor with loading & 2350 No

unloading & fitting etc completed as per inst. Of EIC.

Labour Charges for repairing ceiling fan pedestrain fan,

11 wall fan, repairing with busing, bairing varnish, 720 No

rewinding of motor etc. completed as per inst. of EIC.

P&F of decorative/traditional ceiling fan of

cromton/Havells/Anchor/bajaj,1200 mm size including

copper flexible cord of suitable & approved size from

ceiling rose upto fan terminals & fixing of regulators.

P&F 3 to 5 MFD fan capacitor with fixing the same in

ceiling fan / wall fan etc.

Labour Charges for shifting of wall fan/ceiling fan from

one place to another place of office etc. completed

2.5 Sq mm 3 Cor Cable, CassingCaping under

Computer/Office Table as directed.

P&F 10 W lamp for office quarters etc. ISI marked of

16 approved make chromton/Philips/Havelles with 2 year 125 No

P&F 5 amp plug point etc. including labour and

Repairing of Submersible Pump with all accessories

incl. Removing and replacing Pump

P&F New Exhaust fan all necessary wiring including

labour and material.

P&F e-urja cat cable fitting etc including labour and No

material. (Market Rate)

Repairing of electric gizar with winding or other

Providing and fixing of heavy duty exhausted fan 12" of

Havells / crompton make with ISI mark only including

wiring, earthing to exhausted fan any as per instruction

Providing and fixing ellectronic type cordless bell

23 (effective range minium 50 Ft.) other necessary fitting, 685 No

as per instruction of EIC

Providing and fixing of LED ROOF LIGHT

3/6/9/12/15/20 Watts of Havells / crompton or

equivalent brand make with ISI mark only any as per

instruction of ELC. (a) 3 watts

25 Do as above (b) 6 watts 340 No

26 Do as above (c) 9 watts 450 No

27 Do as above (d) 12 watts 850 No

28 Do as above(e) 15 watts 1050 No

29 Do as above(e) 20 watts 1500 No

Providing & fixing 63A NORTH-WEST (WIPRO),

30 LEGRAND, CRABTREE, or equivalent brand etc. Four 2765 No

pole RCCB switch ISI mark etc.

Wiring as per describe in item 1 for looped plug on

board with flush shock proof (like NORTH-WEST

(WIPRO), LEGRAND,CRABTREE and equivalent to

these) 16A Socket and Switch of 16A Capacity

Unconcealed wiring point for lights and fans with

Sq mm Single core copper conductor as per IS

(2010) with earth wire green (like RR Kable, Havells,

Polycab and equivallent to these) up to 6 meter length

with ISO mark PVC casing and capping 32*12 mm.

Including flush shock proof Modular accessories (like

NORTH-WEST (WIPRO), LRGRAND, CRABTREE and

equivallent to these) mounted in PVC box 3mm thick

PVC/Hydro/PC(Polycarbonated)/Acrylic/Laminated/Bak

elite Sheet Cover

P&F 5 amp plug point etc. Including labour and

A.C Point looped plug on board with flush shock proof

NORTHWEST (WIPRO), LEGRAND, CRABTREE, or

equivalent brand etc. or approved brand 25A plug

socket / Ac starter and switch of 25A capacity

Providing & fixing 10A to 25A NORTH-WEST

35 (WIPRO), LEGRAND, CRABTREE or equivalent brand, 175 No

etc. Single pole MCB switch ISI mark etc.

Providing & fixing two Pole MCB of 10A to 32A (like

36 NORTH-WEST (WIPRO), LEGRAND, CRABTREE and 685 No

equivalent to these)

Providing & fixing four Pole MCB of 40A with metal box

37 (like NORTH-WEST (WIPRO), LEGRAND, 1884 No

CRABTREE and equivalent to these)

Providing & fixing 63A NORTH-WEST (WIPRO),

38 LEGRAND, CRABTREE or equivalent brand, etc. Four 1050 No

pole MCB switch ISI mark etc.

Providing & laying of Main Line meter to MCB

Distribution Box 4.00 Sq mm. Copper wire (4.00 Sq

mm size 4 Nos.) (like RR Kable, Havells, Polycab and

equivallent to these)

Copper Plate Earthing size of 600mm*600mm with a

thickness of 3mm. This shall be installed in a pit of Size

40 900mm*900mm*1050mm (Ibh) and Chemical Earthing 9715 No

Bag 25Kg Copper patti 25*3mm with length 5 feet and

copper wire 18 sq mm up to 3 meters.

Flood Light Supplying & erecting Wall washer type

flood light. The housing of the luminaire shoud be

made from pressure diacastaluminium, with epoxy-

polyster powder coating, aerodynamik design with

ergonomic shape. The lamp and gaer compartment

should be intregrated together to make fast access to

lamp & control gear. The reflector should be high

quality anodized aluminium type, parabolic type for

narrow rotationaly symmetric beam, for high lighting

architectural lighting application. Suitable for one no of

70 W CDM-T lamp. And with choke, capacitor, holder,

etc., complete with Lamp. As per detail Specification

and drawing. Sample to be approved by consultant

architect. The model should be philips make flood light

uniflood RVP339 or other aproved brand having similar

look as well as Technical data. Basic Rate: 4000/

Supplying & erecting XLPE(IS:7098)(I)-88 ISI

42 unarmored copper cable 1.1 KV grade to be erected as 80 Mtr.

directed of following size.(B) 3 core 2.5 Sq. mm

Providing & Fixing new LED street light 36 watt ISI

43 marked of approved make Crompton/Havelles/Philips 2372 No

with 2 years warranty

Providing & Fixing street light timer with contactor

44 Amp ISI marked of approved make Havelles/L&T with 2200 No

warranty 2 years.

Providing & Fixing 24 ftuppar Dome Light 90 watt ISI

marked of approved make Chrompton/Philips/Havelles

Removing & repairing single/three phase motor

monoblock incl. winding & rewinding of burnt motor

with loading & unloading & fitting etc. completed as per

Providing and fixing Single phase monoblock 1 HP

1400 Rpm motor pump with starter of approved make

ISI marked Chrompton/CRI/Falcon with 2 years

Providing and fixing Three phase monoblock 1 HP

48 Rpm motor pump with starter of approved make ISI 13000 No

marked Chrompton/CRI/Falcon with 2 years warranty.

Providing and fixing Single phase Submersible 2 HP

49 motor pump with starter of approved make ISI marked 21700 NO

Chrompton/CRI/Falcon with 2 years warranty.

Providing and erecting XLPE(IS:7098)(I)-88 ISI

armoured cable multistrand/Solid Copper conductor for

50 1.1 KV. To be laid on wall with necessary clamps or in 539 MTR

existing trench/pipe at road crossing or floor of

following size of cable (B) 4 core 6 Sq.m

Providing and Fixing automatic water controller starter

51 6 to 18 Amp having ISI mark of any make including 4200 Mtr

labour and material

52 Carbon Sensor Set (6 Set) 1200 Set

53 Copper Strip 3.00 mm thick Rolled for Earthing 790 Mtr.

54 Copper 4 Core 50 Sq mm Cable 1841.25 Mtr.

55 63/100 Amp Copper Busbar (3-Phase neutral) 4399 Nos

200A Triple Pole Metal Clade SFU 415/500 V with HRS

Fuse (Suitable load and natural link)

Industrial type wall fan/Pedestal fan 400/600 mm

230volt make (Crompton/Almonad/Usha)

58 100A MCCB FP 8066.78 Nos

59 P&F of 63A FP ELCB 8057 Nos

P &F LED 4ft. 40 watt Tube light ISI marked of

60 approved make Crompton/Philips/Havelles with 2 year 880 Nos

61 200A MCCB FP 16500 Nos

62 24 Way DB Box 5600 Nos.

P&F of decorative/traditional BLDC with Remote

Controlceiling fan of Crompton/Havelles/Anchor/bajaj,

63 1200 mm size including copper flexible cord of suitable 4150 Nos.

& approved size from ceiling rose upto fan terminals &

fixing of regulaters.

64 16sq mm 4core copper cable 1450 Mtr.

100mm * 50mm Cable Tray with Cover with Powder

Coating and Fitting

200mm * 50mm Cable Tray with Cover with Powder

Coating and Fitting

300mm * 50mm Cable Tray with Cover with Powder

Coating and Fitting

68 Decorative Wall Light 5000 Nos.

Providing and fixing of

69 Panasonic/siska/Wipro/Crompton or Equillent Brand 36 2850 Nos

to 50 watt panel light 2 feet*2 feet LED Light

70 Miscellaneous Work -

71 P&F Gelco make 100 AMP ELCB/ELR 19000 Nos

72 P&F Gelco make 125 AMP ELCB/ELR 23500 Nos

73 P&F Gelco make 160 AMP ELCB/ELR

74 P&F Aeco Make 2*2 Cealing Fan

75 160 AMP ATS Switch ISI Make

76 125 AMP ATS Switch ISI Make

In Words: - Twenty Five Lakh Rupees Only

% Above/Below of Estimate Rate

Stamp/Sign of Contractor

The rates of mentioned items are inclusive of labour charges for replacement

and exclusive of GST.

Executive Engineer (O&M),

DGVCL, Olpad ® Division, Surat

1). Evaluation of the tender will be done on lowest offered rate.

2). I/We agree to supply the articles noted above at the rates herein tendered

by me/us subjected to the condition of tender and supply of the tender inquiry

which I/We have carefully read and which I/We thoroughly understood and to

which I/We agree.

3). I/We here by agree to keep this offer open for 180 days after the date of

opening of technical bids of the tender and shall be bound by Communication of

acceptance dispatch within the prescribed time.

4).if in any Bidders company/firm, the interest (i.e. Shareholding in company

and share in partnership firm) of any employee of the tendering company or

his/her relative as defined in section 2(77) of the company’s Act.2013 is 10% or

more, the tendering company will not deal with such company /firms at all.

Tender therefore, must specifically disclosed this fact in his technical Bid. Non-

disclosure of such facts would immediately disqualify the tenderer for further

dealing with the tendering company.