Construction of SDO Civil Complex at Bilaspur in Distt. Yamuna Nagar (Pdg. LAN and EPABX System Only).

Amount

31.44 (b) : - S/E of PVC conduit pipe ISI marked (Medium) recessed in wall / ceiling etc. including cost of PVC ends, inspection box and all other material requiredto complete the job in all respect to the entiresatisfaction of Engineer-in-Charge of work. 25 mm dia

31.78 i : - Supply and laying of multicore telephone cable conductor size 0.51 mm bright annealed copper conductor PVC insulated and shealed in existing pipe/Channel and making necessary connection complete in all respect upto the entire satisfaction of the Engineer-in-Charge of the work. 2 Pair Telephone wire

iv : - 20 Pair Telephone wire

1 : - Supply Installation Testing & Commissioning of 24 Port Switch a) 24x1G SFP/T Ports loaded with suitable modules of equivalent Make.Alied/Cisco/Extreme Network b) 4x1G/10G SFP+ Slots Should support switching fabric of 288Gbps or more Should support min forwarding rate of 214 Mpps Two or more Switches in stack should be capable to operate as one logical L3 Virtual switch with synchronisation of L3 & L2 protocols for higher availability with stacking bandwidth of min 40Gpbs per switch expandable to 160Gbps. Switch should be supplied with required stacking cables Core Switch will be equipped with two core switches in HA mode which should operate as logical one L3 Switch The connected servers or switches should be dual homed to core switches using standard LACP for automatic load balancing and high availability Should equipped with internal redundant power supplies Should support Unidirectional Link Detection (UDLD) or equivalent to detect unidirectional links caused by incorrect fibre optic wiring or port faults and disable on fibre optics interfaces Should support ITU-T G.8032 for sub 50ms ring protection/Equivalent. Support 802.1D, 802.1S, 802.1w, Rate limiting Support 802.1X Security standards Support 802.1Q VLAN encapsulation, IGMP v1,v2 and v3 snooping, MLD snooping Support up to 4096 VLANs Support IGMP Snooping and IGMP Querying Should support STP, RSTP, MSTP Should support Static routing, Support RIP for IPv4 and RIPng for IPv6 Support OSPFv2 for IPv4 & OSPFv3 for IPv6 Support BGP for IPv4 & IPv6 Support PIM for IPv4 SM, DM and SSM, PIMv6-SM, IEEE 802.3az Support VRRP for IPv4 & VRRPv3 for IPv6 Support IPV4 & IPV6 dual stack Should Support 802.1Q Tagged VLAN, port based VLANs and Private VLAN Should Support IEEE 802.1v VLAN classification by protocol and port Should Support IEEE 802.1ad Provider bridges (VLAN stacking, Q-in-Q) Should Support dynamic VLAN Registration or equivalent Should Support VLAN trunking or equivalent, IEEE802.1ac Switch needs to have a console port for management via a console terminal or PC Must have support SNMP V1, V2 and V3 Should support 4 groups of RMON Should have accessibility using Telnet, SSH, Console access, easier software upgrade through network using TFTP etc. Configuration management through CLI, GUI based software utility or using web interface, USB interface for configuration backup Support SNMPv6, Telnetv6 and SSHv6, DHCPv6 relay, DHCPv6 client, NTPv6 client and server, Support NTP/SNTP Support be supportable to SDN openflow v1.3 for future requirements. Switch should support simplified network management features such as auto backup, auto upgrade, auto-provisioning and auto recovery with easy centralized management solutions. Should support ACLs, VLAN ACL's Support DHCP snooping, IP source guard and Dynamic ARP Inspection (DAI), Support MAC address filtering and MAC address lock-down, Support Tri-authentication: MAC-based, web-based and IEEE 802.1x, Support DHCPv4 (server, relay and client Support sflow, Port mirroring

2 : - Operating Temperature- 0-50C Supply Installation, testing and commissioning of 24-port loaded 1 U Height Cat6 Modular Jack Panel with integrated rear cable management tray(For Data UTP Field Cables). jac As per specification. Make & Model: R&M/AMP/Molex.

3 : - Supply Installation Testing & Commissioning of Cat6 UTP Information Outlet -Blue (Data). Should be PCB free and Tool less will be added advantage with halozn free. User Side. As per specification. Make & Model: R&M/AMP/Molex.

4 : - Supply Installation Testing & Commissioning of 2-port with dust cover faceplate including back box and all other accessories As per specification. Make & Model: R&M/AMP/Molex.

5 : - Supply Installation Testing & Commissioning of Cat6 Patch Cords - 1Mtr -Blue ( Data Rack Side), As per specification. Make & Model: R&M/AMP/Molex.

6 : - Supply Installation Testing & Commissioning of Cat6 Patch Cords - 2Mtr -Blue ( Data Field Side), As per specification. Patch cord should have provion of lock with information outlet port.Make & Model: R&M/AMP/Molex.

7 : - Supply Installation, testing and commissioning of Indoor soft jelly filled SINGLE MODE 6 CORE - OS2 . Should be ISO.IEC 11801 type OS2 and ITU-T REC G 652D. Tube Idenification :Single tube. Fibre protection (Tube) : Polybutylene Terephthalate (PBT). Water Blocking :Thixotropic Gel (Tube) and Petroleum Jelly (Interstices) with cotton poly thread protective. Core Wrapping : Polyethylene Terephthalate with cotton paper guard protection : Corrugated Steel Tape Armour (ECCS Tape). Strength Member: soft protetective periphery /Central S. Sheath : UV Stabilized Polyethylene (HDPE). Maximum. Tensile Strength-Short Term : 400N or better. Mass (Nominal) : minimum 50 kg/km Optical fiber cable with jelly filled 6F Loose Tube ( Unitube ) Type CSTA SM FOR SERVER ROOM to Each Network Rack Backbone connectivity As per specification. Make & Model: R&M/AMP/Molex.

8 : - Supply Installation Testing & Commissioning of 12F, 1U, LC OM3, LIU Loaded with Pigtails, Splice tray, LIU have slider channel for rack mount. It has spindle with fiber management accessories. As per specification. Make & Model: R&M/AMP/Molex.

9 : - Supply Installation, testing and commissioning of PATCH CORD LC-LC MM OS2 DUPLEX LENGTH- 2mtr. It has covered with metal outer sheath for antirodent protection.As per specification. Make & Model: R&M/AMP/Molex.

10 : - Supply Installation & Commissioning of 9U Rack for Network Switch with all necessary accessories, civil, electrical works & peripheral items. Make & Model: Comrack/Netrack/D-Link.

11 : - Supply, Erection, testing and commissioning of 1 KVA on line UPS along with batteries comple in all respect.Make:-APC/Emerson /Microtek

12 : - Supply and erection of 1000-Base SM SFP fiber module of same OEM quoted for switch

13 : - Supply Installation Testing & Commissioning of 3 Core Power Cable 1.5 sqmm. Make: Finolex/Polycab/Havells

14 : - Splicing and testing of fiber core with digital report of OFC performance.

15 : - S/I/T/C of IP-PBX/PABX/Communication System shall employ IP at its core with IP switching technology and 100% non-blocking.The system should be IPV6 ready.The manufacturer should have DSIR recognized R&D.The product should be a Make in India product from an indigenous design manufacturer.The system should have VoIP and VMS at its core i.e. VoIP and VMS modules should be mountable on the CPU.The system shall provide IP functionality at its core to support SIP/IP extensions and trunks over SIP protocol. It should be possible to support SIP Trunks and SIP/IP Extension with the single VoIP module. It should support license-free 99 SIP trunks and 999 SIP/IP users (SIP/IP Phone, Mobile softphones, UC Client).It Should have 04 Analog Trunk Lines, 08 Digital Extensions, 64 Analog Extensions. It should be possible to reach the capacity of system to 200 analog and 999 IPusers without any add-on CPU or chassis/hardware platform.The architecture of the system shall be capable of seamless migration to its maximum capacity by simply adding peripherals cards/modules in the same chassis without compromising function/features of the system. The architecture should be non-stackable eliminating individual power supply for each chassis.The system should built on an universal slot architecture and modular in design to enable seamless growth, by adding the desired necessary modules and cards as and when required. Any interface peripheral card can be inserted in any slot of the platform, whereby it is possible to increase or decrease the trunk lines or subscriber lines of the system as per the requirement.VoIP and VMS should be Daughter-board modules mounted on CPU. No slots should be utilized for it. VoIP module(s) should support up to 128 VoIP channels, 99 SIP trunks and 999 SIP/IP users (SIP/IP Phone, Mobile softphones, UC Client) on single VoIP module.System power supply should be inbuilt and SMPS type with input ranges from 100 – 240 VAC, 47-60 Hz OR 48VDC +/- 15%It shall have distributed processing architecture, SLIC and SMT Design.It should support maximum 128 IP-TDM calls and 500 IP-IP calls (without transcoding in Relay RTP Mode) and 50 IP-IP video calls.The system should support UC Clients with following UC features:Presence and IM,Video Calling,Auto Sign-in,IM to SMS and vice versa,SMS to email and vice versa,Bulk MessagingThe system should supports SNMP, which helps to manage and monitor network elements, audit network usage and detect network faults. SNMP manager should support SNMPv1/v2c/v3 versions.It should support SIP over TLS and SRTP to ensure VoIP call security over IP network.System should have two Gigabit Ethernet ports for LAN and WAN to separate out local and VoIP traffic on external network.It should be suitable for DTMF as well as the FSK type of telephone instruments.The EPABX capacity shall be suitable to scale up to 99 VoIP (SIP) Trunks and 999 SIP/IP Users.It should have built-in multi-party conferencing without any software licensing. It should be possible to carry out 15 conferences of 3-participants at a time. The maximum number of participants supported in single conference would be 21.Existing radios available with us which are as follows, shall be ineroperable:1. MOTOROLA GM338 2. TADIRAN RT 6001/PRC 6020 (HF) 3. TADIRAN RT - 7330M VHF 4. STARS V MKII 25 W It should have minimum 4 radio interface port per card. It should support HF/VHF/UHF with the same radio card.The system should supports in-skin GSM card so that the multiple SIMs can be inserted on the GSM card plugged on to the PBX platform. Hence, the calls on GSM mobile can be routed through this SIMs and contribute in reduction of overall telecom bill.The system must supports following features:Call Budget on Trunk,CLI based DISA (Mobile Extension),GSM Trunk Connectivity,Multi-stage Dialing,Returned Call to Original Caller (RCOC),Automatic Call to Missed (Predefined) Calls on Trunks,Dual ring,Routing of calls to only permissible legal networks (Logical Partitioning),SMDR/CDR through Ethernet Port Make:Cisco,Avaya,Alcatel

16 : - Alcatel / Cisco/ Avaya 8029 9 Series Digital Display size 70x38 mm, Navigator 4 directions • Wide graphical LCD display • Socket for headset . • Minimum 6 Programmable keys,Soft Keys, personal keys with LED status indication Navigator keys

17 : - Supply, Erection, testing and commissioning of Push Button Telephone Desktop model CLI, flash , redial ,mic with speaker complete in all respect. Make :-Beetel M 71

18 : - Supply and erection of IDF/MDF with Krone Make module on Krone Make MS Box duly painted and having lock facilitis. 50 pair

i : - 20 Pair

19 : - Supply Installation Testing & Commissioning of Cat6 UTP Information Outlet -Blue (Data). Should be PCB free and Tool less will be added advantage with halozn free. User Side. As per specification. Make & Model: R&M/AMP/Molex.

20 : - Supply Installation Testing & Commissioning of 2-port with dust cover faceplate including back box and all other accessories As per specification. Make & Model: R&M/AMP/Molex.

21 : - Supply Installation Testing & Commissioning of Cat6 Patch Cords - 1Mtr -Blue ( Data Rack Side), As per specification. Make & Model: R&M/AMP/Molex.

22 : - Supply Installation Testing & Commissioning of Cat6 Patch Cords - 2Mtr -Blue ( Data Field Side), As per specification. Patch cord should have provion of lock with information outlet port.Make & Model: R&M/AMP/Molex.

23 : - Supply Installation & Commissioning of 9U Rack for Network Switch with all necessary accessories, civil, electrical works & peripheral items. Make & Model: Comrack/Netrack/D-Link.

24 : - Supply, Erection, testing and commissioning of 2KVA on line UPS along with batteries complete in all respect.Make:-APC/Emerson /Microtek/Valrack.

NB TECHNOLOGIES INDIA