Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹34.2 LAccepted-AOC | L1 | Accepted-AOC Being L1 and reasonable | |
| 2 | L2₹43.4 L+₹8.0 L (22.7%)Rejected-Finance | L2 | Rejected-Finance OTHER THAN L1 | |
| 3 | L3₹44.0 L+₹8.6 L (24.4%)Rejected-Finance | L3 | Rejected-Finance OTHER THAN L1 |
Tender Value
₹45 L
EMD Value
₹90,000
Closing Date
18 Dec 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (KH) YOL
GE (KH) YOL, YOL CANTT, HP
Comprehensive repair to sunken floor to toilet/bathroom roof sheeting, joinery and other misc repair alongwith all E/M related repair works to Md Accn under AGE B/R-II of GE (KH) YOL
2023_MES_629173_1
GE/Y-69/2023-24
Open Tender
Civil Works
Item Rate
180 days
YOL CANTT
Please refer Tender documents.
9 documents required · 9 mandatory
₹500
GE (KH) YOL
₹90,000
Yes
10 Feb 2024
21 Nov 2023
25 Dec 2023
21 Nov 2023
18 Dec 2023
5 Dec 2023
Amount
SCHEDULE 'A' PART-I :- Dismantling plain or corrugated steel sheeting any gauge, thickness including Nainital or similar pattern roof covering, all as specified.
Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified, all as specified and directed.
Pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified, all as specified and directed.
Dismantling wrought iron or mild steel work of any description not otherwise provided for, complete all as specified.
Rolled sections as in Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240s, steel work complete, all as specified.
Demolition of cement concrete (unreinforced) in ground floors and paving, not exceeding 15cm thickness (below or above ground level), un-reinforced including removal of debris to a distance n.exc 100m, all as specified and as directed.
Plain cement concrete M-10, nominal mix, type C-2, using 40mm graded mechanically crushed stone aggregate as in sub base/below tiles, 100mm thick, surface finished even and fair to receive top surface, all as specified.
Plain cement concrete M-10, nominal mix, type C-2, using 40mm graded mechanically crushed stone aggregate as in flooring, foot path, hardstanding, plinth protection, bases of water tank, 75mm thick, surface finished even and fair to receive top surface, all as specified.
Plain cement concrete M-15, nominal mix, type B-0, using 12.5mm graded mechanically crushed stone aggregate as in flooring, 25mm thick, surface finished even and fair to receive top surface, all as specified.
Dismantling timber scantlings in fillets, rails, posts, rafters, purlins, etc. under 40 sqcm in section complete all as specified.
Second class Plain fillets. square, rectangular or triangular in section, clean sawn, secured with nails or brads sectional area n. exc 3 sqcm secured with nails or breads, complete, all as specified.
Second class Plain fillets. square, rectangular or triangular in section, clean sawn, secured with nails or brads sectional area exc 3 & n. exc 6 sqcm secured with nails or breads, complete, all as specified.
Second class Plain fillets. square, rectangular or triangular in section, clean sawn, secured with nails or brads sectional area exc 6 & n. exc 13 sqcm secured with nails or breads, complete, all as specified.
Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or galvanised wire staples, fixed in repair, complete all as specified.
Sheet glass 3mm thick ordinary quality and glazing with oil putty wooden beads in squares, not exc. 0.5sqm in each pane, fixed in repair, complete all as specified.
Sheet glass 3mm thick ordinary quality, ground or obscured or frosted, on one side in squares, not exc. 0.5sqm in each pane, fixed in repair, complete all as specified.
S&F 3mm thick ordinary quality colorless cast acrylic sheet with light transmittance of 92% including fixing with necessary screws and aluminium beading, fixed in repair, complete all as specified.
S&F 3mm to 4mm thick translucent polycarbonate sheet including fixing with necessary screws and aluminium beading, complete all as specified.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing and rubbish of the premisses, complete including removal of debris to a distance exc 1.5 km but n.exc 2 km, all as specified and as directed.
Vitrified ceramic tiles light shade, 10mm thick (Square/ rectangular) area of each tile not exc. 0.36Sqm, in floors and the like, set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over and including 15mm thick screed bedding layer in cement mortar 1:6 (1 cement : 6 coarse sand) complete, all as specified.
Vitrified ceramic tiles light shade, 10mm thick (Square/ rectangular) area of each tile not exc. 0.36Sqm, in vertical surfaces such as skirting and the like, set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over and including 10mm thick rendering in cement mortar 1:4 (1 cement : 4 coarse sand) complete, all as specified.
Mat finish joint less (non skid), Premium class I grade, coloured, ceramic tiles, 7 to 8mm thick (Square/ rectangular) area of each tile exc. 0.11 Sqm but not exc. 0.18 Sqm, in floors and the like, set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over and including 15mm thick screed bedding layer in cement mortar 1:6 (1 cement : 6 coarse sand) complete, all as specified.
Glazed ceramic coloured/digital tiles of size 350x250/450x350x7mm thick as in vertical surfaces such as jointed in neat cement slurry and pointed with white or coloured cement to match and including 10mm thick plastering in cement mortar 1:4 (1 cement : 4 coarse sand) complete, all as specified.
Mat finish joint less (non skid), Premium class I grade, coloured, ceramic tiles, 7 to 8mm thick (Square/ rectangular) area of each tile exc. 0.06 Sqm but not exc. 0.11 Sqm, in floors and the like, set and jointed in neat cement slurry and pointed in white or coloured cement to match, laid over and including 15mm thick screed bedding layer in cement mortar 1:6 (1 cement : 6 coarse sand) complete, all as specified.
Glazed ceramic coloured tiles of size 300x200x7mm thick as in vertical surfaces such as jointed in neat cement slurry and pointed with white or coloured cement to match and including 10mm thick plastering in cement mortar 1:4 (1 cement : 4 coarse sand) complete, all as specified.
Chequered cement concrete tiles machine pressed of size 320cmx30cmx 25mm thick with grey cement, set jointed & pointed in neat cement slurry mixed with pigment to match the shade of the slab in floors laid over and including 20mm thick screed bed in cement mortar 1:6 complete, all as specified.
Granite (jet black) 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement(1:2) with admixture of pigment to match the shade of granite stone including grinding and polishing complete as in kitchen platform, window cill /steps laid over and including 15mm thick screed bed in cement mortar (1:6), all as specified.
Rounding to edges of stone slabs of any type one edge, such as in steps cooking platform, cill of window and other simillar situations complete all as specified.
Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor, overall length of cover plate 140mm, fixed in repair complete all as specified.
Floor door stopper of brass body and tongue, anodised, with hard drawn steel spring, fixed in floor, overall length of cover plate 140mm, fixed in repair complete all as specified.
Aluminium (diecast) body door closer hydraulically regulated, designation No. 2, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed in repair, complete all as specified.
Resecuring or easing & adjusting without taking down door/window shutters of any description exc 1 sqm and n.exc 2 sqm, complete all as specified.
Taking down door/window shutters of any description exc 1 sqm and n.exc 2 sqm resecuring or easing & adjusting and refixing in same opening, complete all as specified.
Taking down door/window shutters of any description n.exc 1 sqm resecuring or easing & adjusting and refixing in same opening, complete all as specified.
Resecuring or easing & adjusting steel window without taking down shutters of any description, complete all as specified.
Taking down aluminium window shutters of any description resecuring or easing & adjusting including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. and refixing in same opening, complete all as specified.
Taking down aluminium door shutters of any description resecuring or easing & adjusting including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. and refixing in same opening, complete all as specified.
S&F Prelaminted board 18/19mm thick exterior grade prelaminated one side with decorative choice lamination and other side balancing white lamination and fixed with screws to timber frame work as on wall panelling cup boards shutters (sliding or fixed), including taking out old board, complete all as specified and directed.
S & F Continuous (piano) hinges, mild steel, bright finish or electrogalvanised Width of flaps (when open) in 40mm, all as specified.
Ball catches with 8mm dia steel ball, and brass body and striking plate including letting in and fixed, complete all as specified and directed.
Magic eye ball ultra-clear view with wide angle for all round visibility with ultra clear lens, superior and antique brass finish with 180 degree great visibility to install over a wide range of door thickness upto 35mm, complete all as specified and directed.
S & F stainless steel self closing auto hinges for wooden cabinet shutter, complete all as specified and directed.
S & F stainless steel telescopic channel ball bearing drawer channel 500mm with loading capacity 45Kg, complete all as specified and directed.
S & F mortice latch with two levers (vertical type), brass body and length of the latch 65mm, complete all as specified and directed.
300mm, ordinary rat tail rod pattern springs including roller and roller plate and fixed in repair, complete all as specified and directed.
Curtain rod brackets fancy type brackets with rounded fancy type end knobs, with antique finish or coloured suitable for holding 25mm dia single curtain rods fixed to wall with necessary polished wooden piece 20mm thick exc 50sqcm in section, and fixed in repair, complete all as specified and directed.
S&F 25mm dia mild steel powder coated, fancy type curtain rod, and fixed in repair, complete all as specified and directed.
Taking down chowkats or frames including shutters (without taking off shutters from the frame) not exc. 1.5 Sqm each and removing from site, all as specified
Solid PVC frame (Single Rebated) of size 60mm x 30mm made out of solid PVC foam with homogenous fine cellular structure having smooth outer integral skin with suitable metal stiffner and fixed with 100 x 8 sheet metal CSK screws complete all as specified and as shown on drawing (Note :- Door frame shall be water proof, termite proof, elegant and should have excellent screws holding strength to fix hinges and hold doors properly for a long life), complete all as specified and directed.
Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site, complete all as specified and directed.
Butt hinges (ISI marked), medium weight, cold rolled, mild steel 100mm long, all as specified.
Aluminium anodised, (ISI marked), barrel tower bolts of extruded section, length of bolt 125mm, fixed, all as specified.
Extruded aluminium alloy handles (ISI marked), fabricated type, anodised, of size 125mm, all as specified.
Aluminium alloy, anodised, sliding door bolt with hasp,staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, length of bolt 150mm with lipping frame to match, all as specified.
Taking down chowkats or frames including shutters (without taking off shutters from the frame) exc. 1.5 Sqm but not exc. 4 Sqm each and removing from site, all as specified.
Taking down shutters of any description exc. 1 Sqm not exc. 2 Sqm each and removing from site, all as specified.
2nd class hard wood (Sal/Hollock) plain, solid, straight chowkats and frames, wrought, framed, rebated on solid, rounded or chamfered, put together with glue, pinned at joints with one or more rebates, all as specified.
35mm thick flush shutters, solid core construction with block board core and plywood face panels commercial type on both sides covered with decorative veneer with lipping/frame to match type all as specified and directed.
Factory made second class hard wood (Sal) glazed and Skelton door shutters 35mm thick open rebated and prepared to receive glass gauge etc (with sash bars) edges of framing plain chamfered or rounded fitted with cut and mitered beads for securing glass or gauge etc., size of members of shutter as specified in clause 8.24 (a) of part-I, fitted to chowkats, kiln seasoned and chemically pressure treated, complete all as specified.
Factory made second class hard wood (Sal) glazed and Skelton door shutters 35mm thick open rebated and prepared to receive glass gauge etc divided into squares, with plain chamfered or rounded, mitred and rebated sash bars, any number edges of framing plain chamfered or rounded fitted with cut and mitered beads for securing glass or gauge etc., size of members of shutter as specified in clause 8.24 (a) of part-I, fitted to chowkats, kiln seasoned and chemically pressure treated, complete all as specified.
Butt hinges (ISI marked), medium weight, cold rolled, mild steel 125mm long, all as specified.
Aluminium anodised, (ISI marked), barrel tower bolts of extruded section, length of bolt 200mm, fixed, all as specified.
Aluminium alloy, anodised, sliding door bolt with hasp,staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, length of bolt 300mm with lipping frame to match, all as specified.
Extruded aluminium alloy handles (ISI marked),cast type, anodised, of size 150mm, all as specified.
150mm width of recess between flanges (when open) Parliament hinges, mild steel cold rolled, all as specified.
Applying two coats of synthetic enamel paint over a coat of pink primer (1st grade quality) on new wood or wood based surfaces of any description, exc. 10cm width or girth including preparation of surfaces, all as specified.
Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or galvanised wire staples, fixed, complete all as specified.
Sheet glass 4mm thick ordinary quality and glazing with oil putty wooden beads in squares, not exc. 0.5sqm in each pane, fixed, complete all as specified.
300mm, ordinary rat tail rod pattern springs including roller and roller plate and fixed, complete all as specified and directed.
Demolition of brick work or stone/ boulder masonry built in cement mortar including all quoins arches, pillars, including removal of debris to a distance exc 1.5 km but n.exc 2 Km, all as specified and as directed.
Fly ash brick work with old size bricks having crushing strength not less than 75 Kg/Sqcm, straight or curved on plan exceeding 6 metre mean radius built in cement mortar 1:6 (1 cement : 6 coarse sand), complete all as specified.
Taking down cement plaster on brick or stone walls, ceiling, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete including removal of debris to a distance exc 1.5 km but n.exc 2 km, all as specified and as directed.
Rendering plaster 15mm thick in cement mortar 1:6 (1 cement :6 coarse sand) on fair faces of brick wall or stone wall surfaces, surface finished even and smooth without using extra cement, all as specified.
Rendering plaster 15mm thick in cement mortar 1:4 (1 cement :4 coarse sand) on fair faces of brick wall or stone wall surfaces, surface finished even and smooth without using extra cement, including chajja upto 8m height, complete all as specified.
Preparation of newly plastered wall surfaces and applying two coats of oil bound distemper over 2mm thick wall care putty, complete, all as specified.
Three coats of white wash on newly plastered or previously undecorated surfaces of walls including preparation of surfaces complete, all as specified.
Two coats of cement base paint over a coat of primer on newly plastered surface of wall including preparation of surface complete all as specified and directed.
Rendering plaster 10mm thick in cement mortar 1:3 (1 cement :3 coarse sand) on concrete surfaces as in ceiling, surface finished even and smooth without using extra cement, complete all as specified.
Three coats of white wash on newly plastered or previously undecorated surfaces of ceilings including preparation of surfaces complete, all as specified.
Demolition of cement concrete (unreinforced) of padding concrete on roof not other wise specifically provided, including removal of debris to a distance n.exc 100m, all as specified and as directed.
Plain cement concrete M-15, nominal mix, B-1 using 20mm graded mechanically crushed stone aggregate as in padding over roofs, roof kerbs or mud stops, rounded or chamfered on edges, complete all as specified and directed. Note :- (i) The unit rate include for use of form work.
10mm thick plaster in cement mortar 1:3 in order to maintain proper slope and base over existing roof surface for laying of APP, mixed with water proofing compound as per manufacturer instructions finished even and smooth without using extra cement complete, all as specified and directed. (Note:- WPC and APP treatment shall be measured and paid separately)
Supply only Liquid water proofing compound, complete all as specified.
Water proofing treatment on horizontal or vertical surfaces by applying oil bound bitumen primer @ 0.20 Kg/Sqm and providing 4mm thick APP modified water proofing membrane weighing not less than 4 Kg/sqm reinforced with non-woven polyester matt weighing not less than 160 gm/sqm including minimum 10cm side lap and 15cm end lap torch sealed and bonded and applying a coat of blown grade hot bitumen 90/15 over and below the membrane @ 1.20 Kg/sqm in drying over the membrane finished with solar reflective bituminus aluminium paint/primer @ 0.10 Kg/sqm over RCC roof slab/projection/ parapet after cleaning the surfaces by removing dust, dirt etc. as manufacturers instructions, complete all as specified and directed.
PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to wall of bore 150mm including fixing adjustable clamps complete, complete, all as specified.
Mild steel work as in Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165, complete all as specified and directed.
PVC (SWR) bends any radius, 150mm bore (fitted with oval access door, all as specified.
Dismantling wall and ceiling boards (fiber, pulp, insulation etc) or insulation boards/ slabs/ blankets, any thickness including cover fillets in ceiling, all as specified.
4mm thick aluminium composite panel of any colour cladding for exterior finishing of columns, facias, caopies, interior walls, ceiling and partition panels fixed as per manufacturer instructions and design including GI frame work for seamless ceiling comprising of GI perimeter channel 0.55mm thick with two unequal flanges of 20mm and 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre/intermediate channel 0.9mm thick having two equal flanges of 15mm each and web of 45mm suspended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section of 0.55mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457mm centre to centre complete size of the grid 605x605mm, complete all as specified and directed.
Solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing all as specified.
5mm thick PVC sheet fillet with 35mm for wall paneling inclusive of fixing on to wall to make PVC frame complete, all as specified and directed.
PVC insulation panels for false ceiling with EPS stuck to 1mm plain PVC sheet suitably placed in false ceiling grid made of Aluminium/G.I./M.S. as per specification and thickness of PVC insulation panel 10mm, complete all as specified and directed.
Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55mm thick with two unequal flanges of 20mm and 30 mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9mm thick having two equal flanges of 15mm each and web of 45mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section of 0.55mm thickness having kurled web of 50mm and flange of 26 mm each with lips of 10.5mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457mm centre to centre complete size of the grid 605x605mm, complete all as specified and directed.
Steel window 1.25mm thick box type (Primer coated) ERW hollow P section of size 60mm x 25mm double rebated comprises gauged, glazed skelton shutter ERW Sec 50mm x 20mm and 1mm thick with two openable leaf consiting two Nos sash bar of T-Section 20mm x 3mm complete welded to frame with one vertical mullion of ERW box type T-section of size 30mm x 25mm and 1.25mm thick required no of each window, steel duly painted with one shop coat of zinc chromate primer on prepared surfaces) and finishing the surfaces to match with existing including following fitting welded to frame shutter:-(i) Hold fast, 150mm long of 12mm x 3mm made to shape -04 Nos per window. (ii) Handle of Z section 20mm x 25mm, 100mm long -1 No per leaf. (iii) MS tower bolt 150mm long - 2 No per leaf. (iv) Z section 20mm x25mm, 100 long stopper - 1 No per leaf. (v) Cleat 65mm long of hollow square 15mm x 20mm x 63mm welded to hinge -1 No per leaf. (vi) Mild steel pintle hinge of size 75mm x 12mm - 2 Nos per leaf. (vii) Flat iron fillets of size 20X3 mm for fixing wire gauge. (viii) MS work with angle or other section as in window gurad bars, grill (ix) Fabrication & fixing arrangement as per drg No. CEPZ/ TD 26/13. if iron scrap retrived under this item shall be sold to contractor under Sch of credit. Make : As per Appendix 'C'.Note:-(i) Above referred drawing has not been made part of tender. The same can be seen in the office of GE during working hours on any working day.
Mild steel framed work such as grills, gratings, etc with ends of bars shouldered and/ or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed ballusters walk ways; railings; framework of water tanks and similar work conforming to Fe.290. Gde-E-165, all as specified.
Applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer on new steel or steel based surfaces of any description, exceeding 10cm width or girth including preparation of surfaces, all as specified.
Disconnecting existing tanks, setting aside (or lowering, if required) for repair, cleaning and removing all scale and dirt, etc., from water tanks of capacity exc 250 but n.exc 500 ltr, from mouths of circulating pipes, hoisting, reconnecting and re-fixing in position after cleaning and repairing and making connections with existing water supply line, complete all as specified and directed. Note:- Any damages during disconnecting the tanks shall be repaired/replaced by the contractor with no cost to the govt.
Disconnecting existing tanks, setting aside (or lowering, if required) for repair, cleaning and removing all scale and dirt, etc., from water tanks of capacity exc 500 but n.exc 1000 ltr, from mouths of circulating pipes, hoisting, reconnecting and re-fixing in position after cleaning and repairing and making connections with existing water supply line, complete all as specified and directed. Note:- Any damages during disconnecting the tanks shall be repaired/replaced by the contractor with no cost to the govt.
Dismantling water tanks and removing to store water tanks of capacity exc 250 but n.exc 500 ltr, all as specified and directed.
Rotational moulded polyethylene water storage tank 500 Ltrs capacity (Cylindrical vertical with closed top) hoisted and fixed in position inbcluding brass ball valve 20mm dia epoxy coated aluminium rod with polythene float and fly nut, tank nipples with check nuts and washers complete and making connections with existing water supply line, all as specified.
Dismantling water tanks and removing to store water tanks of capacity exc 500 but n.exc 1000 ltr, all as specified and directed.
Rotational moulded polyethylene water storage tank 1000 Ltrs capacity (Cylindrical vertical with closed top) hoisted and fixed in position inbcluding brass ball valve 20mm dia epoxy coated aluminium rod with polythene float and fly nut, tank nipples with check nuts and washers complete and making connections with existing water supply line, all as specified.
25 mm dia Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 20mm - 210 gms/ 25mm-455gms/ 40mm - 690 gms) and fixed in repair, complete all as specified and directed.
Gun metal, globe or gate valves, screwed down, high pressure with crutch or butterfly handle, screwed both ends for 20mm bore iron pipe or for unions and fixed in repair, complete, all as specified.
Gun metal, globe or gate valves, screwed down, high pressure with crutch or butterfly handle, screwed both ends for 25mm bore iron pipe or for unions and fixed in repair, complete, all as specified.
Nipple 20mm bore PTMT suitable for HDPE water tank. (Minimum weight 15mm-38gms/20mm-45gms /25mm- 65gms) and fixed in repair, complete, all as specified.
Nipple 25mm bore PTMT suitable for HDPE water tank. (Minimum weight 15mm-38gms/20mm-45gms /25mm- 65gms) and fixed in repair, complete, all as specified.
M&L for uPVC 15mm dia pipe of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc., any type of pipe, including takingdown/out old pipe.
M&L for uPVC 20mm dia pipe of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc., any type of pipe, including takingdown/out old pipe.
M&L for uPVC 25mm dia pipe of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc., any type of pipe, including takingdown/out old pipe.
Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth in brick walls, complete all as specified.
Wash basins, Vitreous China counter table top premium quality size 610mmx3855mmx130mm or size as per site requirement, white fixed by making suitable holes, new brackets with and including cutting for and pinning on ends of brackets, 450mm long PVC connections 15mm size with PTMT coupling nuts at both ends, trap, grating and union for discharge pipe, waste, chain and plug and porcelain stopper, waste pipe of polythylene of low or high density or PVC of 32mm dia including 32mm dia waste fittings, brass chromium plated with long screwed shanks and fly nuts, flange and bedded in red lead cement and other end fixed, screwed for iron pipe and fixed in repair, complete all as specified.
Vitreous China wash down water closet (pedestal pattern), coloured including traps, connection to drain or outgoing pipe, flushing pipe, anti-syphonage pipe complete including fittings, PVC coloured seat cover and chromium plated jet including PVC connection, fixed complete, including PVC valveless, syphonic action type flushing cistern 10 litres capacity low level with inlet, ball valve, float and handle with brackets with PVC 32mm dia flushing pipe, anti-syphonage pipe, fixed in repair, complete all as specified.
S&F one piece floor mounted toilet water closet of size (WxPxH) 360x675x750mm, white or tinted, S-trap 300mm, trendy square design, slim UF ezee close seat cover, wash down system, dual flush (6/3 ltrs) mechanism and fixed in repairs with necessary fixing bolts/screws etc., complete all as specified and directed. Make:- Jaquar cat Part No. OPS-WHT-15853S300UF, somany, cera or equivalent.
Wash basins, Vitreous China (Flat back or angle back type) size 550mmx400mm, crystal white with and including cutting for and pinning on ends of brackets, 450 mm long PVC connections 15mm size with CP coupling nuts at both ends, waste pipe of polythylene of low or high density or PVC of 32mm dia including Pillar taps fancy type, 15mm bore cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘Hot' or ‘Cold' with long screwed shanks and fly-nuts, 32mm dia waste fittings, brass chromium plated with long screwed shanks and fly nuts, flange and bedded in red lead cement and other end fixed, screwed for iron pipe and fixed in repair, complete all as specified.
Bib taps, 15mm bore, cast copper alloy with crutch or butterfly handle, fancy type chromium plated screwed for iron pipe or for brass ferrule and fixed in repair, all as specified.
Pillar taps, cast copper alloy, with capstan heads, chromium plated, fancy type screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed of 15 mm bore and fixed in repair, complete, all as specified.
Stop valve, cast copper alloy, fancy, type, chromium plated with long shank and cup (concealed type), screwed down, high pressure with crutch or butterfly handle, screwed both ends for 15mm bore iron pipe or for unions and fixed in repairs complete, all as specified.
Angle valve, cast copper alloy, fancy chromium plated, screwed down, high pressure with crutch or butterfly handle, screwed both ends for 15mm bore iron pipe or for unions and fixed in repair complete, all as specified.
S&F bib tap/angle cock/ concealed cock/ wall mixture/ basin mixture spindle for 15mm bore with brass material any type, complete all as specified and directed
Premium quality 15mm bore cental hole basin mixture with regular spout popup waste system, and fixed in repair, complete all as specified and directed. Make:- Jaquar, Cera, Somany or equivalent.
Premium quality 15mm bore wall mixture system with provision for overhead shower, complete with 115mm long bend pipe, connecting legs and wall flange, and fixed in repair, complete all as specified and directed. Make:- Jaquar, Cera, Somany or equivalent.
15mm bore hand shower (health faucet) with 8mm dia, 1m long flexible tube and wall hook and fixed in repair, complete all as specified and directed. Make:- Jaquar, Cera, Somany or equivalent.
Bib taps, 15mm bore two in one, cast copper alloy with crutch or butterfly handle, fancy type chromium plated screwed for iron pipe or for brass ferrule and fixed in repair, complete all as specified.
Glass corner shelf assembly fancy type made of 5 to 6mm thick glass of size 250x250mm fixed with brass CP brackets and fixed in repair, complete all as specified.
Sheet shelf assembly with L clamp consisting of 5 to 6mm thick glass 12 to 15cm wide with brass CP bracket guard and railing 45 to 60cm long and fixed in repair, complete all as specified.
Mirror cabinet with modiguard/saint gobian mirror of size not less than 500mmx350mmx125mm and fixed in repair, complete all as specified.
6mm thick mirror of any size including rounding and polishing of edges with necessary fittings and fixed in repair, complete all as specified.
Brass Chromium Plated, tubular towel rail, 20mm dia, D type, 60cm long between flanges, with brackets, fixed with chromium plated screws, fixed in repair, complete all as specified.
Soap dish, vitreous China white, approximate size 160x160x90mm, chromium plated, fixed to plugs with chromium plated, brass screws fixed in repair, all as specified.
Chromium plated brass shower rose, type, 125mm size suitable for 15mm bore pipe with swivel joint fixed to pipe and fixed in repair, complete all as specified.
PVC connection 15mm size with PTMT nuts at boths end 600mm long and fixed , all as specified.
M&L 32mm dia Low density poly ethylene pipes (LDPE) of pressure rating 6 kg/ sqcm, fixed in wash basin, sinks etc, complete all as specified and directed.
Chromium plated Grating doom 100 mm dia with or without waste hole, complete all as specified and directed.
Chromium plated Grating doom 125 mm dia with or without waste hole, complete all as specified and directed.
Steel plate rack of size 900mmx800mmX200mm made of stainless steel, highly durable and rust-proof, 0.60mm thick fixed with plugs,washers and steel screws including fixed in wall with screws ands PVC sleeve of required or fixing arrangement and fixed in repair, complete all as specified
Sink with drainage board made of stainless steel 1.00 mm thick kitchen or laboratory with plugs, washers and wastes including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, including 40mm dia waste pipe & CP waste coupling ,overall size 915mm x 460mm bowl size 410mm x 330mm x 160 mm and fixed in repair, all as specified.
Bottle trap 32mm bore of PTMT having minimum water seal of 25mm. (Minimum weight 32mm-260gms/ 40mm-270 gms)
Supply and fixed in repair PVC valveless, syphonic action type flushing cistern 10 litres capacity low level with inlet, ball valve, float and handle with brackets including 32mm dia PVC long bend flush pipe 90cm long and 15mm dia PVC connection 600mm with CP brass coupling nuts and PVC washers at both ends, complete, all as specified.
Supply and fixed in repair PVC valveless, syphonic action type kit for flushing cistern 10 litres capacity low level, complete, all as specified.
M&L for sunken slab treatment comprising of following:- (a) Taking out/down old existing sunken slab treatment including PCC and cleaning the old RCC surfaces of sunken slab including removal of the rubbish out of campus complete all as specified. (b) M&L for 25mm thick PCC type B-1 using 20mm graded stone aggregate over cleaned sunken slab surfaces. (c) M&L for applying bitumen priming coat/tack coat over PCC @ 0.30 Kg/Sqm. (d) M&L for 4mm thick APP modified water proofing membrane weighing not less than 4 Kg/sqm reinforced with non-woven polyester matt weighing not less than 160 gm/sqm including minimum 10cm side lap and 15cm end lap torch sealed and bound. (e) M&L for applying bitumen grade 85/25 over primer coat @ 1.20 Kg/sqm. (f) M&L for 25mm thick plastering (in two layers 15mm 1st layer, 10mm second layer) in CM 1:4 mixed with liquid water proofing admixture as per manufacturer instructions over 225mm thick PCC 1:4:8 using 40mm graded stone aggregate complete all as specified and directed by Engr-In-Charge.
Preparation of newly plaster surfaces and applying material and labour for applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, alkali and fungal resistance, dirt resistance exterior paint of required shade (company depot tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 Litre/ 10 sqm, complete all as specified and directed.
Complete removal of existing treatment and applying material and labour for applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, alkali and fungal resistance, dirt resistance exterior paint of required shade (company depot tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 Litre/ 10 sqm, including preparation of old surface, complete all as specified and directed.
Taking down cement plaster/decayed concrete from RCC roof projections/upward parapet walls/down facia/soffits and fins of RCC chajjas/beams/columns/balconies etc. Supply and fixing by means of nailing wire netting of galvanised wire 1.40mm dia and mesh size 20mm and brushing neat cement slury with 3.00 Kg of cement/sqm and M&L for 20mm thick cement rendering in two layers of 10mm each (top/final layer shall be rendered after final setting of under layer) in CM 1:3 on concrete surfaces including scaffolding at a height upto 7.00 mtrs ect complete all as specified and directed.
Taking down point wiring with aluminium/ copper conductor for light point, fan & socket point/ power point etc. complete including switches, sockets, holders, (batten or pendent type), ceiling rose, switch board, bell/buzzer, bell push, and making good to the disturbed surfaces of wall/ floor etc. to match with existing surfaces including white wash/ colour wash/ distempering to match with existing wall/ floor/ ceiling finishes and all as specified and directed.
Taking down sheet metal enclosure DB, MCB, main switch etc and making good distrubed surfaces to match with existing surfaces, complete all as specified.
Point wiring with 1.5 Sqmm copper conductor FRLS (Multi strand) PVC insulated ISI Marked unsheathed cable in and including concealed PVC conduit medium grade, ISI marked of suitable size with all fittings/ accessories and also including PVC insulated ISI marked unsheathed 1.5 Sqmm copper multistranded conductor FLRS as phase, neutral and earth wire connected to common earth dolly and including concealed pressed steel/ cast iron of suitable sizes (modular sunken box) terminal boxes made from 1.60 mm thick sheet for mounting of switches, sockets, fan regulators, light fittings etc. and modular cover plate as top cover for one light point or one fan/exhaust fan point or one bell point, independent, controlled by one way switch/ push button complete all as specified and directed. Note:-i) Wiring colour code i.e Red/Yellow/Blue for phase, Black for neutral and Green for earth shall be maintained. (ii) Rate of cutting chases, cement plaster, white wash and making surface good as existing surface included in quoted rate. (iii) Point wiring is considered for Modular Switches and sockets. Rate of Metallic Sunken box and modular sheet cover plate and other connected accessories required for modular point wiring included in quoted rate. (iv) Rate of modular switch and sockets will be paid seperately under relevant item.
All as per serial item No '148' above, but for one 3 pin 5 Amps socket outlet on the same board with 2.5 sqmm FRLS PVC copper conductor cable and FRLS PVC insulated, unsheathed 2.5 sqmm stranded copper conductor cable as continous earth wire, all as specified and directed.
All as per serial item No '148' above, but for one 3 pin 5 Amps socket outlet on the independent board with 2.5 sqmm FRLS PVC copper conductor cable and FRLS PVC insulated, unsheathed 2.5 sqmm stranded copper conductor cable as continous earth wire, all as specified and directed.
All as per serial item No '148' above, but for 3 pin 15 amps socket out let on independent with 2.5 Sqmm FRLS PVC copper conductor cable and FRLS PVC insulated, unsheathed 2.5 Sqmm stranded copper conductor cable as continuous earth wire, all as specified.
All as per serial item No '148' above, but for one light point controlled by two way switchs.
M & L for point wiring with 1.5 sqmm (Nominal Area) FRLS PVC insulated unsheathed multi stranded copper conductor, 1100 Volts grade, in and including PVC casing capping/conduit (ISI marked) with accessories such as bends, cross, elbow, tees etc. of suitable size including PVC junction box /MS pressed steel cadmium plated terminal box not less than 1.6 mm thick for mounting switches, sockets, fan regulators etc and 3 mm thick laminated hylam sheet top cover (ISI marked) including continuous earth wire FRLS PVC insulated unsheathed 1.5 Sqmm (nominal area) copper multistranded conductor, 1100 Volts grade, connecting to common earth and earth dolly complete all as specified for one light point/ fan point controlled by one switch Note : (i) Wiring Colour code i.e. Red/Yellow/Blue for Phase, Black for neutral and Green for earth shall be maintained. (ii) Chase cutting if required shall be measured and paid separately under relevant items in this schedule.
All as per serial item No '153' above, but for one 3 pin 5 Amps socket outlet on the same board with 2.5 sqmm PVC copper conductor cable and PVC insulated, unsheathed 2.5 sqmm stranded copper conductor cable as continous earth wire, all as specified and directed.
All as per serial item No '153' above, but for one 3 pin 5 Amps socket outlet on the independent board with 2.5 sqmm PVC copper conductor cable and PVC insulated, unsheathed 2.5 sqmm stranded copper conductor cable as continous earth wire, all as specified and directed.
All as per serial item No '153' above, but for 3 pin 15 amps socket out let on independent with 2.5 Sqmm PVC copper conductor cable and PVC insulated, unsheathed 2.5 Sqmm stranded copper conductor cable as continuous earth wire, all as specified.
All as per serial item No '153' above, but for one light point controlled by two way switchs.
Cutting chases in brick walls, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth, complete all as specified.
Supply and fix modular switch piano flush type one way 6 Amps, 1 module, 230V, Fixed complete all as specified.
Supply and fix modular switch piano flush type one way 16 Amps, 1 module, 230V, Fixed complete all as specified.
Supply and fix modular switch piano flush type two way 6 Amps, 1 module, 230V, Fixed complete all as specified.
S&F Modular socket 6 Amp 3 Pin, two module 230 Volts.
S&F Modular socket 6/16 Amp 5 Pin, two module 230 Volts.
Supply and fix modular bell push with indicator 6 Amps, 1 module Fixed, complete all as specified.
S&F Modular fan regulator step type 100 Watt one module 230 volts.
Ceiling rose, three phase, PVC/Polycarbonate, insulated body, fixed in repair all as specified.
Lamp holder PVC/Polycarbonate type with back plate suitable for batten fittings, fixed in repair, complete all as specified and directed.
Supply and fixed in repair LED Bulb 9 watt, cool/warm white 6500K/3000K, suitable for base B22/E27, 230V, complete all as specified and directed.
Supply and fixed in repair LED invertar Bulb 12 watt, cool/warm white 6500K/3000K, suitable for base B22/E27, 230V, complete all as specified and directed.
Supply and fix in repairing LED Adore 2.8 W having base suitable for B22/ E27/ E14 holder CDL Candle Lamp, WW/ CDL, 6500/3000 K, 230 volts complete all as required at site and directed by Engr - in - Charge. Make:Havells / Polycab/Bajaj /CG
Supply and fix in repair modular Bell Push with indicator 6 Amps, 1 module including all As per existing make complete all as specified and directed by Engr-in- Charge.
Supply and fix in repair modular fan step regulator, 2 Module including all As per existing make complete all as specified and directed by Engr-in- Charge.
Supply and fix modular cover plate with frame, 1 module including all As per existing make complete all as specified and as directed by Engr-in- Charge
Supply and fix modular cover plate with frame, 3 module including all As per existing make complete all as specified and as directed by Engr-in- Charge
Supply and fix modular cover plate with frame, 8 module including all As per existing make complete all as specified and as directed by Engr-in- Charge
Supply and fix modular cover plate with frame, 10 module including all As per existing make complete all as specified and as directed by Engr-in- Charge
Supply and fix modular cover plate with frame, 12 module including all As per existing make complete all as specified and as directed by Engr-in- Charge
Supply and fix modular metal flush box 3 module Fixed in repair, complete all as specified.
Supply and fix modular metal flush box 8 module Fixed in repair, complete all as specified.
Supply and fix modular metal flush box 10 module Fixed in repair, complete all as specified.
Supply and fix modular metal flush box 12 module Fixed in repair, complete all as specified.
Supply and fix modular metal flush box 1 module Fixed in repair, complete all as specified.
Single pole and neutral enclosure with a two pin and earth plug top and socket complete with one double pole MCB 20 Amps, complete all as specified.
Sheet metal enclosures factory made for DBs when MCBs to be used, single pole and neutral (double Door), 8 way, 240 volts with 200 Amp rated bus bar, all as specified.
Sheet metal enclosures factory made for DBs when MCBs to be used, single pole and neutral (double Door), 12 way, 240 volts with 200 Amp rated bus bar, all as specified.
Supply and fix distribution board iron clad TPN DB double door with IP-43 protection 415 V 3 Phase 50 HZ 4 Way complete with appropriate size of copper busbar and neutral link complete and incl cutting chasing to wall for fixiing DB and making good the disturbed wall to match with existing surface, incuding taking out old, complete all as specified.
M & L for vertical DB iron clad factory made TPN 4 Way, MCCB as incomer and MCB SP as out going, double door DB IP 43 protection level, incl Blanking plate, lugs etc complete and neutral link with one MCCB 4 pole 415V 100 Amps rating with rupture capacity 16KA incl connection, fixing flushed to wall, necessary grouting, making good with CM 1:4 and painted to match exisitng wall color, incuding taking out old, complete. (outgoing MCB will be measured seperately)
MCB SP 6 to 32 Amp, 240 Volts, 10 KA, C series including taking out old, all as specified. Note:- The connection to the MCBs shall be done through thimble/lugs do not direct wire shall be connected to MCBs.
MCB SPN 32 Amp, 240 Volts, 10 KA C series including taking out old, all as specified. Note:- The connection to the MCBs shall be done through thimble/lugs do not direct wire shall be connected to MCBs.
MCB SPN 63 Amp, 240 Volts, 10 KA C series including taking out old, all as specified. Note:- The connection to the MCBs shall be done through thimble/lugs do not direct wire shall be connected to MCBs.
MCB TPN 63 Amp, 415 Volts, 10 KA C series including taking out old, all as specified. Note:- The connection to the MCBs shall be done through thimble/lugs do not direct wire shall be connected to MCBs.
S & F MCB, 4 Pole, 63 A capacity, 415 V, 10 KA, C series including taking down old MCB 4 Pole. Note: The connection to the MCBs shall be done through thimble/ lugs do not direct wire shall be connected to MCBs.
S & F MCB, 4 Pole, 100 A capacity, 415 V, 10 KA, C series including taking down old MCB 4 Pole. Note: The connection to the MCBs shall be done through thimble/ lugs do not direct wire shall be connected to MCBs.
M & L for sub main wiring with two single core PVC insulated unsheathed, 1100 Volts grade, (FRLS) copper cable 6 sqmm stranded conductor and drawing through and including rigid PVC non metalic surface conduit medium duty (ISI Marked) with conduit accessories such as junction boxes, bends, tees etc. including continuous earth wire PVC insulated unsheathed 1100 volts grade, cable 6 sqmm copper conductor and connected to common earth dolly complete as directed including taking down old submain wiring. Note :-(i) One run of PVC conduit, two runs of cable (Phase + Neutral) and one run of earth wire shall be measured and paid as one unit.
M & L for sub main wiring with two single core PVC insulated unsheathed, 1100 Volts grade, (FRLS) copper cable 6 sqmm stranded conductor and drawing through and including rigid PVC non metalic surface casing caping medium duty (ISI Marked) with conduit accessories such as junction boxes, bends, tees etc. including continuous earth wire PVC insulated unsheathed 1100 volts grade, cable 6 sqmm copper conductor and connected to common earth dolly complete as directed including taking down old submain wiring. Note :-(i) One run of PVC casing caping, two runs of cable (Phase + Neutral) and one run of earth wire shall be measured and paid as one unit.
M & L for sub main wiring with two single core PVC insulated unsheathed, 1100 Volts grade, (FRLS) copper cable 4 sqmm stranded conductor and drawing through and including rigid PVC non metalic surface conduit medium duty (ISI Marked) with conduit accessories such as junction boxes, bends, tees etc. including continuous earth wire PVC insulated unsheathed 1100 volts grade, cable 4 sqmm copper conductor and connected to common earth dolly complete as directed including taking down old submain wiring. Note :-(i) One run of PVC conduit, two runs of cable (Phase + Neutral) and one run of earth wire shall be measured and paid as one unit.
M & L for sub main wiring with two single core PVC insulated unsheathed, 1100 Volts grade, (FRLS) copper cable 4 sqmm stranded conductor and drawing through and including rigid PVC non metalic surface casing caping medium duty (ISI Marked) with conduit accessories such as junction boxes, bends, tees etc. including continuous earth wire PVC insulated unsheathed 1100 volts grade, cable 4 sqmm copper conductor and connected to common earth dolly complete as directed including taking down old submain wiring. Note :-(i) One run of PVC casing caping, two runs of cable (Phase + Neutral) and one run of earth wire shall be measured and paid as one unit.
Supply and fixing in repair LED luminaire 300 mm x 300 mm, 15/18 watt, 220 V AC recessed type complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as required at site and directed by Engr - in - Charge.
Supply and fixing in repair LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as required at site and directed by Engr - in - Charge.
Replacement of LED Decorative ultra slim square profile LED lighting integral type fixture with extruded polycarbonate, environmental friendly, energy efficient ready to use pack, 10 watt LED, 230V, and making connection with 2 core copper flexible cable of size 23 x .0076 from ceiling rose/ PVC connector to light complete, all as specified and directed.
Replacement of LED Decorative ultra slim square profile LED lighting integral type fixture with extruded polycarbonate, environmental friendly, energy efficient ready to use pack, 20 watt LED, 230V, and making connection with 2 core copper flexible cable of size 23 x .0076 from ceiling rose/ PVC connector to light complete, all as specified and directed.
S&F in repair LED tube light fitting integral type 1x 20 W, 230V, LED tube light fitting 3 in 1 light (Cool day light, normal white and warm white in one fitting) with extruded polycarbonate, environment friendly, energy efficient ready to use complete with all accessories internally prewired and including connecting up with twin core twisted flexible copper conductor cable with suitable size including dismantling of unserviceable tube light all as specified and directed.
Supply and fixing of 30 Watt New generation energy saving and environmental friendly long life LED street light made up of pressure die cast aluminium housing with high power LED as lighting source and lens enbedded PC cover having TOP opening seperate toughtned glass/verminproof driver compartment, SPDs with IP66 protection and impact resistance of IK07, suitable for pole dia 43mm (max) connecting with PVC insulated three core flexible copper conductor of suitable size from ceiling rose to fitting including bracket of size 32mm dia lenght 1.2m along with clamps, including taking down old light, complete all as specified and as directed.
Supply and fixing decorative wall lighr fixture made up of polycarbonate, with 9W LED lamp B22 base complete with all accessories internally prewired and including connecting up with twin core twisted flexible copper conductor cable with suitable size, including taking out old light, complete all as specified and directed.
Material and labour for PVC Casing & Caping of size (20 x 12) mm ISI Marked suitable for electrical wiring complete all as specified incl taking out old and directed.
Material and labour for PVC Casing & Caping of size (25 x 16) mm ISI Marked suitable for electrical wiring complete all as specified incl taking out old and directed.
Material and labour for uPVC electrical conduit pipe of size 20 mm dia (heavy duty) Ivory color ISI marked suitable for electrical wiring including junction box, tees and bends etc incl taking out old complete all as spd and directed.
Material and labour for uPVC electrical conduit pipe of size 25 mm dia (heavy duty) Ivory color ISI marked suitable for electrical wiring including junction box, tees and bends etc incl taking out old complete all as spd and directed.
Material and labour for PP Corgulated flexible Conduit pipe of 16 mm dia suitable for internal wiring incl taking out old complete all as specified and directed.
Material and labour for PP Corgulated flexible Conduit pipe of 20 mm dia suitable for internal wiring incl taking out old complete all as specified and directed.
Material and labour for PP Corgulated flexible Conduit pipe of 25 mm dia suitable for internal wiring incl taking out old complete all as spd and directed.
Material and labour for electrical round sheet PVC material used for covering junction boxes, fan mounting and other electrical opening on wall incl taking out old complete all as spd and directed by Engr - in - Charge.
Supply and fixing in repair MCB Protected socket (modular AC box) 3 Module with MCB SP of capacity 25 Amp and power socket for geyser complete all as spd and directed by Engr - in - Charge.
Material and labour for repair of wooden/ metal box fitted on site for protection of 2 to 4 Nos meter boxes / DB Boxes by dimentling existing unsv hinges, doors and locking arrangements and other part etc and replacing with new hinges, doors, locking arrangements and other parts as required at site and directed by Engr- in- Charge including painting the complete box with paint as directed by Engr - in - Charge.
Taking down ceiling fan of any sweep, any size/make from existing position of any height by disconnecting electrical connections and transporting to workshop. Inspection of ceiling fan in presence of Engr-in-charge/JE (or rep of department) after dismentling spares parts. Transporting ceiling fan back from work shop to site including hanging/ fixing and connecting up and testing etc complete all as required at site and directed by Engr - in - Charge.
M&L for complete repair and maintenance of unserviceable ceiling fan of 1200mm/1400mm sweep at work shop, incl dismantling complete the ceiling fan parts i.e. blades, fan rod, canopy, connection, inspecting serviceability of all the parts, re fixing of serviceable parts after cleaning and replacement of unserviceable parts with company's genuine parts i.e. capacitor, bearing, bushes, shaft, bracket, rubber bush, connecting wire, PVC connector, aluminium clamp for rod, bracket, bush rod, blade and greasing/oiling etc assembling, cleaning and testing of ceiling fan as directed.
Removing of old burnt winding wiring any type, cleaning stator complete for burnt wiring, carbon residue and rewinding of stator winding of any type/any make fan/ any stator design ceiling fan of 1200mm sweep with superior quality super enameled winding copper wire of existing specification, gauge and weight with superior quality insulation for satisfactory functioning fan in presence of JE incharge complete all as directed by Engr-in-Charge.
Taking down carefully exhaust fan of any sweep, any size/make from existing position of any height by disconnecting electric connections and transporting to workshop. Inspection of ceiling fan in presence of Engr-in-charge/JE (or rep of department) after dismentling spares parts. Transporting exhaust fan back from work shop to site including hanging/ fixing and connecting up etc complete all as required at site and directed by Engr - in - Charge.
M&L for complete Repair and maintenance of unserviceable exhaust fan of any sweep at work shop, including dismantling complete the parts i.e. blades, fan rod, canopy, fan cover, connection, inspecting serviceability of all the parts, re fixing of serviceable parts after cleaning and replacement of unserviceable parts with company's genuine parts i.e. capacitor, bearing, bushes, shaft, connecting wire, PVC connector and greasing/oiling etc assembling, cleaning and testing of exhaust fan as directed.
Removing of old burnt winding wiring any type, cleaning stator complete for burnt wiring, carbon residue and rewinding of stator winding of any type/any make fan/ any stator design exhaust fan of any sweep with superior quality super enameled winding copper wire of existing specification, gauge and weight with superior quality insulation for satisfactory functioning fan in presence of JE incharge complete all as directed by Engr-in-Charge.
Taking down water storage heater (Geyser) of 15/25/35/50 liters capacity from electric socket and disconnecting from PVC connection, water supply and replacement of syphon assembly, unserviceable parts, and refixing at same / different location after cleaning of geyser tank, refixing the same duly grouting nuts, bolts washers and connecting to existing water connection complete, all as specified and as directed by Engineer-in-Charge. complete all as specified.
Supply and replacement of heating elements 1.5/2.0/3.0 KW 230V ISI marked round base, triangular base suitable for water heater of any type including connection with suitable cable complete, all as specified and directed by Engineer-in-Charge. Make:-Theeta/Racold/Airex
S&F in repair for thermostat switch and capillary thermostat switch of geyser 230V, (adjustable range bewteen 0 degree to 90 degree centigrade temp range), ISI marked as per existing thermostat suitable for hot water storage heater 15/ 25 / 35 / 50 Ltr, complete all as specified and as directed.
S&F in repair for defective steel inner tank of 15/25/35/50 Litres capacity geyser tank made out of steel sheet 2 mm thick suitable for 6/9 hole assembly complete, all as specified and as directed by Engineer-in-Charge.
Replacement of earthing complete with galvanised steel earth plate electrode 60 cm x 60 cm x 6 mm thick buried directly in ground (earth pit not less than 2.25m deep below normal ground level) with top edge of plate not less than 1.5m below ground level, connecting to galvanised iron wire 4.0mm dia (as earth lead wire), by means of bolt, nuts, check nuts and washer of galvanised and earth wire protected by provision of galvanised iron pipe light grade, 15 mm bore including provn of concrete pit in plain cement concrete M-20 type B-1 using 20mm graded crushed stone aggregates with 40mm thick cover of rainforced cement concrete M-20 reinforced with XPM (weight not less than 4 kg/Sqm) and frame of angle iron 25x25x3mm with lugs 2 Nos and with 6mm dia mild steel bar handle made to shape, galvanised iron medium grade 20mm bore pipe for watering perforated at bottom 1.75 metre long placed on top edge of earth plate, common salt and charcoal filling, test point made out of phosphorous bronze with fixing arrangement, funnel, wire mesh and including earth work in any type of soil, returning filling in and removal of surplus soil to a distance not exceeding 50 metre, all as per electrical plate No. 3 of SSR 2009 Part-I and connection to earth test point all as specified and testing on completion. NOTE :- Item of earthing includes the cost of 7.5 m long galvanised iron earth wire 4mm size and protection pipe of 15mm bore galvanised iron light grade and earth work.
M/S VIG AND COMPANY
Him Builders
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .