Loading…
Loading…
Tender Value
₹3.1 Cr
EMD Value
₹3.1 L
Closing Date
10 Aug 2026, 6:00 pm
Executive Engineer, R and B Division, Morbi
Construction of Revenue staff quarters (Type C-4 & B-4) at Maliya (Miyana) Morbi, Dist.Morbi
326087
07 of 2026 27
Open
Civil Works - Buildings
Works
Morbi
9 documents required · 9 mandatory
₹6,000
EXECUTIVE ENGINEER R and b DIVISION MORBi
₹3.1 L
20 Jul 2026
20 Jul 2026
20 Jul 2026
10 Aug 2026
20 Jul 2026
Name of Work :-Construction of Revenue staff quarters (Type C-4 & B-4) at Maliya (Miyana) Morbi, Dist.Morbi
=// Bill of Quantities //-
Item Quantitie Item of Works Unit Estimated Rates Total Amount
Item Quantitie Item of Works Unit Estimated Rates Total Amount
No. Estimated Rs. in Figure Rs. In Words Accourding to
1 0.30 Clearing and grubbing road land including uprooting rank vegetation grass Hect 28455.09 Rupees Twenty Eight Estimated
bushes,shrubs,sapling and trees girth up to 300 mm removal of stumps of trees cut earlier Thousand Four Hundred
and disposal of unserviceable materials (C) By mechanical means in area of light jungle Fifty Five Paise Nine Only
2 825.00 Earthwork for embankment including breaking clods, dressing with all lead and lift Cum 169.28 Rupees One Hundred Sixty
(excluding watering and consolidation) (E) From Borrow area within all lead Nine Paise Twenty Eight
3 825.00 Rolling & Watering of earthwork in layers with power roller including filling in depressions Cum 22.96 Rupees Twenty Two Paise
which occur during the process. As directed Ninety Six Only
4 1128.00 Excavation for foundation upto 1.5 m depth including sorting out and stacking of Cum 267.08 Rupees Two Hundred Sixty
useful materials and disposing off the excavated stuff upto all lead & Lift.(C) Hard Seven Paise Eight Only
5 419.00 Excavation for foundation for depth from 1.5 m to 3.0 m including sorting out and stacking Cum 287.21 Rupees Two Hundred
of useful materials and disposing off the excavated stuff upto all lead & Lift.(C) Hard Eighty Seven Paise Twenty
Murrum One Only
6 83.00 Providing and laying ordinary cement concrete M.150 for curing complete including cost of Cum 4727.19 Rupees Four Thousand
formwork and reinforcement for reinforced concrete work in Foundations, footings,Base of Seven Hundred Twenty
columns and Mass concrete. Seven Paise Nineteen Only
7 252.00 Providing and laying cement concrete 1:3:6 (1-Cement : 3 coarse sand : 6- hand broken Cum 3095.25 Rupees Three Thousand
stone aggregates 40 mmnominal size) and curing complete excluding cost of formwork in Ninety Five Paise Twenty
(A) Foundation and Plinth Five Only
8 144.00 Pro. & laying controlled cement concrete M-250 and curing complete inclu. the cost of form Cum 4457.34 Rupees Four Thousand
work and foundation, footings, base of column and mass concrete. Four Hundred Fifty Seven
Paise Thirty Four Only
9 69.00 Providing and laying Controlled cement concrete M 25 and curing complete including the Cum 6026.12 Rupees Six Thousand
cost of formwork and excluding cost of reinforcement for reinforced concrete work in Plinth Twenty Six Paise Twelve
Item Quantitie Item of Works Unit Estimated Rates Total Amount
Item Quantitie Item of Works Unit Estimated Rates Total Amount
No. Estimated Rs. in Figure Rs. In Words Accourding to
10 114.00 Brick work using common burnt clay building bricks having crushing strength not less than Cum 4245.09 Rupees Four Thousand Estimated
35 kg./Sq.Cm. in foundation and plinth in Cement Mortar 1:5. (1- Cement : 5 -fine sand)(B) Two Hundred Fourty Five
Conventional Paise Nine Only
11 560.00 Filling available excavated earth (excluding rock) in trenches. plinth, sides of Cum 136.92 Rupees One Hundred
foundations etc. in layers not exceeding 20 cm. in depth consolidating each disposited Thirty Six Paise Ninety
layer by ramming and watering. Two Only
12 72.00 Filling in plinth with sand under floors including watering ramming, consolidating and Cum 481.80 Rupees Four Hundred
dressing complete Eighty One Paise Eighty
13 445.00 Filling in foundation and plinth with murrum or selected soil in layers of 20cm. thickness Cum 301.78 Rupees Three Hundred One
including watering, ramming and consolidating etc. complete. Paise Seventy Eight Only
14 299.00 Carring out plinth treatment to post construction / existing structure by spraying chemical SqM 124.35 Rupees One Hundred
solution for termite control treatment including labour and material consistment with I.S.I Twenty Four Paise Thirty
specification. Using Chlordene and Chiorpurfiles 20 EC.As Per 6131_paret-II Five Only
Consentration Weight one percent is recommended i.e one litre 20 EC chemical emulsion
with 19 liter give 1 % concrentration inclusive of one litre chemical emulsion appication at
the rate of 5 Litre chemical /Sqm of surface is recommended as per I.S
15 0.00 Providing and laying Controlled cement concrete M 250 and curing complete including the 0.00 0.00 0
cost of formwork and excluding cost of reinforcement for reinforced concrete work in
A 69.00 Upto Floor two Level Cum 7918.68 Rupees Seven Thousand
Nine Hundred Eighteen
Paise Sixty Eight Only
B 22.00 For floor three level Cum 7960.06 Rupees Seven Thousand
Nine Hundred Sixty Paise
C 12.00 for floor four level Cum 8001.44 Rupees Eight Thousand
One Paise Fourty Four Only
16 0.00 Providing and laying Controlled cement concrete M 25 and curing complete including the 0.00 0.00 0
cost of formwork and excluding cost of reinforcement for reinforced concrete work in Beam
A 91.00 Upto floor two Level Cum 6482.69 Rupees Six Thousand Four
Hundred Eighty Two Paise
Sixty Nine Only
Item Quantitie Item of Works Unit Estimated Rates Total Amount
Item Quantitie Item of Works Unit Estimated Rates Total Amount
No. Estimated Rs. in Figure Rs. In Words Accourding to
B 42.00 For floor three level Cum 6524.06 Rupees Six Thousand Five Estimated
Hundred Twenty Four Paise
C 11.00 for floor four level Cum 6565.44 Rupees Six Thousand Five
Hundred Sixty Five Paise
Fourty Four Only
17 0.00 Providing and laying Controlled cement concrete M 25 and curing complete including the 0.00 0.00 0
cost of formwork and excluding cost of reinforcement for reinforced concrete work in Slab
A 76.00 Upto floor two Level Cum 6686.44 Rupees Six Thousand Six
Hundred Eighty Six Paise
Fourty Four Only
B 33.00 For floor three level Cum 6727.82 Rupees Six Thousand
Seven Hundred Twenty
Seven Paise Eighty Two
C 5.00 for floor four level Cum 6769.20 Rupees Six Thousand
Seven Hundred Sixty Nine
Paise Twenty Only
18 0.00 Providing and laying Controlled cement concrete M 250 and curing complete including the 0.00 0.00 0
cost of formwork and excluding cost of reinforcement for reinforced concrete work in
Vertical and Horizontal fins.
A 14.00 Upto floor two Level Cum 6064.88 Rupees Six Thousand Sixty
Four Paise Eighty Eight
B 6.00 For floor three level Cum 6106.26 Rupees Six Thousand One
Hundred Six Paise Twenty
C 34.00 for floor four level Cum 6147.64 Rupees Six Thousand One
Hundred Fourty Seven
Paise Sixty Four Only
19 0.00 Providing and laying Controlled cement concrete M 25 and curing complete including the 0.00 0.00 0
cost of formwork and excluding cost of reinforcement for reinforced concrete work in Lintel
A 4.00 Upto floor two Level Cum 6026.11 Rupees Six Thousand
Twenty Six Paise Eleven
B 4.00 For floor three level Cum 6067.49 Rupees Six Thousand Sixty
Seven Paise Fourty Nine
Item Quantitie Item of Works Unit Estimated Rates Total Amount
Item Quantitie Item of Works Unit Estimated Rates Total Amount
No. Estimated Rs. in Figure Rs. In Words Accourding to
C 2.00 for floor four level Cum 6108.87 Rupees Six Thousand One Estimated
Hundred Eight Paise Eighty
20 0.00 Providing and laying Controlled cement concrete M 250 and curing complete including the 0.00 0.00 0
cost of formwork and excluding cost of reinforcement for reinforced concrete work in
A 2.00 Upto floor two Level Cum 6510.42 Rupees Six Thousand Five
Hundred Ten Paise Fourty
B 2.00 For floor three level Cum 6551.80 Rupees Six Thousand Five
Hundred Fifty One Paise
C 2.00 for floor four level Cum 6593.18 Rupees Six Thousand Five
Hundred Ninety Three
Paise Eighteen Only
21 0.00 Providing and laying Controlled cement concrete M 250 and curing complete including the 0.00 0.00 0
cost of formwork and excluding cost of reinforcement for reinforced concrete work in Stair
A 12.00 Upto floor two Level Cum 6989.20 Rupees Six Thousand Nine
Hundred Eighty Nine Paise
B 6.00 For floor three level Cum 7030.58 Rupees Seven Thousand
Thirty Paise Fifty Eight
22 0.00 Providing TMT Bar FE 500D reinforcement for R.C.C. work including bending, binding 0.00 0.00 0
and placing in position complete.
A 75451.00 Upto floor two Level kg 77.29 Rupees Seventy Seven
Paise Twenty Nine Only
B 20510.00 For floor three level (a+1.04) kg 78.34 Rupees Seventy Eight Paise
Thirty Four Only
C 9630.00 for floor four level (b+1.04) kg 79.39 Rupees Seventy Nine Paise
Thirty Nine Only
23 0.00 Brickwork using common burnt Clay building bricks having crushing strength not less than 0.00 0.00 0
35 kg./Sq.Cm. in Super structure in Cement Mortar 1:5. (1- Cement : 5 -fine sand).
A 170.00 Upto floor two Level Cum 4526.81 Rupees Four Thousand Five
Hundred Twenty Six Paise
Eighty One Only
Item Quantitie Item of Works Unit Estimated Rates Total Amount
Item Quantitie Item of Works Unit Estimated Rates Total Amount
No. Estimated Rs. in Figure Rs. In Words Accourding to
B 87.00 For floor three level (a+41.70) Cum 4568.93 Rupees Four Thousand Five Estimated
Hundred Sixty Eight Paise
Ninety Three Only
C 16.00 for floor four level (b+41.70) Cum 4611.04 Rupees Four Thousand Six
Hundred Eleven Paise Four
24 0.00 Half brick masonry in common brunt clay building bricks having crushing strength not less 0.00 0.00 0
than 35 Kg/Sq.Cm. in Cement mortar 1:3 ( 1-Cement : 3-coarse sand ) with 2 Nos of 6mm
Mild steel round bars after every three course embedded in Cement Mortar in foundation
and plinth (B) Conventional
A 189.00 Upto floor two Level SqM 696.33 Rupees Six Hundred Ninety
Six Paise Thirty Three Only
B 190.00 For floor three level (a+53.89) SqM 750.76 Rupees Seven Hundred
Fifty Paise Seventy Six
25 0.00 Providing 10mm thick cement plaster in Double coat on RCC Columns, Beams & Ceillings 0.00 0.00 0
for interior plastering With Single Coat Mala Plaster in(i)Cement mortar 1:4 (1-cement:4-
A 762.00 Upto floor two Level Sqm 122.26 Rupees One Hundred
Twenty Two Paise Twenty
B 285.00 For floor three level (a+26.96) SqM 149.49 Rupees One Hundred
Fourty Nine Paise Fourty
C 46.00 for floor four level (b+26.96) SqM 176.72 Rupees One Hundred
Seventy Six Paise Seventy
26 0.00 Providing 15mm thick cement plaster in Double coat on Rough (Similar)side of single or 0.00 0.00 0
half brick walls,RCC Column, Beams for interior plastering and finished With Double
Coat Mala Plaster in (i) Cement mortar 1:3 (1-cement:3-sand)
A 1634.00 Upto floor two Level SqM 211.82 Rupees Two Hundred
Eleven Paise Eighty Two
B 1008.00 For floor three level (a+26.96) SqM 239.05 Rupees Two Hundred
Thirty Nine Paise Five Only
C 331.00 for floor four level (b+26.96) SqM 266.28 Rupees Two Hundred Sixty
Six Paise Twenty Eight Only
Item Quantitie Item of Works Unit Estimated Rates Total Amount
Item Quantitie Item of Works Unit Estimated Rates Total Amount
No. Estimated Rs. in Figure Rs. In Words Accourding to
27 0.00 20mm thick sand faced GUTAKA FINISHED cement plaster on walls above ground level 0.00 0.00 0 Estimated
consisting of 12mm thick backing coat of C.M. 1:3 (1-cement : 3-sand) and 8mm thick
finishing double coat of C.M. 1:1 (1-cement : 1-sand) etc. complete.
A 791.00 Upto floor two Level SqM 315.69 Rupees Three Hundred
Fifteen Paise Sixty Nine
B 485.00 For floor three level (a+6.79) SqM 322.54 Rupees Three Hundred
Twenty Two Paise Fifty
C 297.00 for floor four level (b+6.79) SqM 329.40 Rupees Three Hundred
Twenty Nine Paise Fourty
28 37.00 Providing and filling cinder inlcuding watering and consolidation etc complete. Cum 602.25 Rupees Six Hundred Two
Paise Twenty Five Only
29 2432.00 Providing throating or plaster drip and moulding to R.C.C.Chhajja. Rmt 43.05 Rupees Fourty Three Paise
30 505.00 Providing and fixing chiken mesh jali with square of 12.50 x 12.50 mm of 25 gauge at SqM 414.40 Rupees Four Hundred
junction the Brick.masonary and reinforcement cement concrete member, work done before Fourteen Paise Fourty Only
plastering work including scaffolding etc complete.
31 331.00 Providing and laying Mirror polished Machine polished Granite stone slab 18 mm Sqm 3127.38 Rupees Three Thousand
(Average) thick for For Doors / WIndows cill & Jams Clading as per design incl. full One Hundred Twenty
moulded round front edge in trade of steps laid on 20 mm thick cement mortar 1:6 (1 - Seven Paise Thirty Eight
cement : 6 coarse sand ) jointed with grey cement slurry including rubbing and polishing Only
32 454.00 P & L vitrified (Soluble Salt) 10 mm thick tile flooring over 20 mm (average) base of Sqm 1476.54 Rupees One Thousand Four
cement mortar 1:6 ( 1 cement: 6 coarse sand) on new surface or fixing on existing flooring Hundred Seventy Six Paise
by adhesive material including dismentaling of existing flooring and jointed with color Fifty Four Only
cement slurry including finised with flush pointing & cleaning the surface etc. complete for
shade approved by architect as per Arch. drawing.
33 67.00 Providing and laying Vitrified tiles 8 to 10 mm thick in skrting risers of steps and dedo on Sqm 1195.02 Rupees One Thousand One
10mm thick cement plaster 1:3 (1 cement : 3-coarse sand) and jointed with Colour cement Hundred Ninety Five Paise
slurry complete for shade approved by architect as per Arch. drawing. Two Only
34 49.00 Providing and laying polished blue Kota stone slab flooring over 20mm (Average) thick Sqm 1013.87 Rupees One Thousand
base of cement mortar 1:6 (1-cement : 6-coarse sand) or L.M. 1.1.5 (1-Lime putty :1.5 - Thirteen Paise Eighty Seven
coarse sand) laid over and jointed with grey cement slurry mixed with pigment to match the Only
shade of slab including rubbing and polishing etc. complete. (A) 25mm thick
Item Quantitie Item of Works Unit Estimated Rates Total Amount
Item Quantitie Item of Works Unit Estimated Rates Total Amount
No. Estimated Rs. in Figure Rs. In Words Accourding to
35 35.00 Providing and laying Ceramic tiles 6mm thick in flooring with 3mm groove & Epoxy Sqm 1138.50 Rupees One Thousand One Estimated
grouting laid on a bed of 12mm thick cement mortar 1:3 (1-cement : 3-coarse sand ) Hundred Thirty Eight Paise
finishing with flush pointing in white cement. Fifty Only
(Extra for epoxy grouting 8 Rmt in 1 SqM = 15*8)
36 438.00 Providing and laying coloured glazed tiles of the size 8 mm to 10 mm in skirting, risers of Sqm 1488.24 Rupees One Thousand Four
steps and dedo on 10 mm. thick cement plaster 1:3 (1 cement : 3 coarse sand) & jointed with Hundred Eighty Eight Paise
Colored cement slurry. Twenty Four Only
37 283.00 Providing and laying broken chine mosaic flooring for terrace using 12 mm to 20 Sqm 779.70 Rupees Seven Hundred
mm broken pieces of glazed tiles to be laid over cement mortar 1:3 to plain or slope and to Seventy Nine Paise Seventy
be tempered to bring mortar creme out upto surface using white cement including Only
rounding off junctions and extending them upto 15 cm along the wall,clearing with water
and oxalic acid etc. as directed.
38 292.00 Providing and laying cement concrete flooring 1:2:4 (1-cement : 2-coarse sand : 4-graded Sqm 339.08 Rupees Three Hundred
stone aggregate 20mm nominal size) laid in one layer and finished with a floating coat of Thirty Nine Paise Eight
neat cement. (B) 50mm thick. Only
39 4066.00 Applying two coats of Birla or Asian acrylic lapy ( putty) & two coats of primer of Sqm 40.59 Rupees Fourty Paise Fifty
approved brand and manufacture on new wall surface to give an even shade including Nine Only
thoroughly brushing the surface free from mortar dropping and other foreign matter and
sand papered smooth.
40 4066.00 Wall painting (two coats) with plastic emulsion paint of approved brand and manufacture on Sqm 89.89 Rupees Eighty Nine Paise
undecorated wall/Celing surface to give an even shade including throughly brushing the Eighty Nine Only
surface free from mortar droppings and other foreign matter and sand papered smooth.
41 1573.00 Finishing wall with weather proof exterior emulsion paint on wall surface (two coats) to Sqm 120.26 Rupees One Hundred
give an required shape even shade after thoroughly brushing the surface to remove all dirt, Twenty Paise Twenty Six
and remains of loose powdered materials.etc complete Only
42 2539.00 Providing & fixing M.S. Grill for with necessary fitting with necessary fitting with one coat Kg. 81.64 Rupees Eighty One Paise
of primer and two coat oil paint as per details given by architect. as per attached detail Sixty Four Only
architectural drawing.
43 123.00 Providing And Fixing 35mm thick solid core Wooden Flush Shutter Confirming To Is:2202 Sqm 6821.40 Rupees Six Thousand Eight
& Isi Approved Manufacturer, Covered With 1mm Thick Laminates On Each Side Of Hundred Twenty One Paise
Shutter, 6mm Thick Polished Machine Glued Teakwood Beading On Periphery, 150Mm - Fourty Only
200Mm S.S.Handles And S.S.Fixtures & Locking Arrangement On Each Shutter, Fixed
With 4 Nos. 150Mm High S.S.Hinges,Door Stopper, door eye viewer etc As Per Selection.
Item Quantitie Item of Works Unit Estimated Rates Total Amount
Item Quantitie Item of Works Unit Estimated Rates Total Amount
No. Estimated Rs. in Figure Rs. In Words Accourding to
44 50.00 Providing and fixing window having extruded aluminum Colour anodized section frame Sqm 5041.86 Rupees Five Thousand Estimated
main outer size 127mm x 38.10mm x 1.35mm @wt. 1.384kg/m, horizontal Four track Fourty One Paise Eighty Six
member size 122.20mm x 31.75mm x 1.10mm@ wt 1.205 kg/m, vertical member of size Only
122.20mm x 31.75mm x 1.50mm @1.398 kg/mt with sliding shutters of horizontal member
size 40mm x 18mm x 1.29mm@ 0.456kg/mt ,vertical member of size 40mm x 18mm x
1.29mm @ 0.456 kg/mt with 3 shutter of 5 mm thick transparent bronze colour tinted float
glass & 1 shutter of SS mosquito net shutter with powder coated aluminum fittings and
fixtures and transparent silicon sealant glass fixing to frame as per details etc complete for
45 8.00 Providing and fixing window having extruded aluminum Colour anodized section frame Sqm 4549.05 Rupees Four Thousand Five
main outer size 127mm x 38.10mm x 1.35mm @wt. 1.384kg/m, horizontal Three track Hundred Fourty Nine Paise
member size 122.20mm x 31.75mm x 1.10mm@ wt 1.205 kg/m, vertical member of size Five Only
122.20mm x 31.75mm x 1.50mm @1.398 kg/mt with sliding shutters of horizontal member
size 40mm x 18mm x 1.29mm@ 0.456kg/mt ,vertical member of size 40mm x 18mm x
1.29mm @ 0.456 kg/mt with 3 shutter of 5 mm thick transparent bronze colour tinted float
glass & 1 shutter of SS mosquito net shutter with powder coated aluminum fittings and
fixtures and transparent silicon sealant glass fixing to frame as per details etc complete for
46 6.00 Providing and fixing Standard Extruded Colour Anodized Alluminium Section, Sqm 2822.09 Rupees Two Thousand
Equivalent To Jindal Section Frame - 21458, With 5Mm. Thick Frosted Glass Adjustable Eight Hundred Twenty Two
Louvers Of Standard Make as per instructions given by engineer in charge. Paise Nine Only
47 15.00 Providing cooking platform of 60 cm. width and 70 cm. height including 25 mm. thick side SqM 3970.39 Rupees Three Thousand
polished Kota Stone vertical and horizontal support and including fixing of steel sink Nine Hundred Seventy
cutting in plateform as per design including cost of cement (Using granite stone over Kota Paise Thirty Nine Only
48 137.00 Providing and fixing CUPBOARD shutters using 19 mm thick waterproof plywood ( ISI SqM 10227.52 Rupees Ten Thousand Two
710) and fixing minimum 0.8 mm thick decorative lamination sheet (20 mm x 2 mm) Hundred Twenty Seven
Plywood frame having a size 7 cm x 4 cm and also provide drawer with tendum of min Paise Fifty Two Only
60cm size using necessary fixtures, fastening, nails, fevicol, ball catch, magnet and
innerside of cupboard oil painting two coats with primer coat etc. complete as per detailed
drawing and laminate will be selected by engineer in charge.
49 112.00 Providing and fixing stainless steel modular railing at 900mm height and of SS pipe with Rmt 3254.87 Rupees Three Thousand
support of horizontal pipe as 15mm dia at required spacing as per design by engineer in Two Hundred Fifty Four
charge and SS having 316 grade and 15 guage pipe including fastening, hold fast, clumps, Paise Eighty Seven Only
coach bolts for fixing to wall including touching finishing to wall etc complete approved by
Item Quantitie Item of Works Unit Estimated Rates Total Amount
Item Quantitie Item of Works Unit Estimated Rates Total Amount
No. Estimated Rs. in Figure Rs. In Words Accourding to
50 73.00 Providing and fixing stainless steel modular railing at 200mm height and of SS pipe with Rmt 1616.91 Rupees One Thousand Six Estimated
support of horizontal pipe as 15mm dia at required spacing as per design by engineer in Hundred Sixteen Paise
charge and SS having 316 grade and 15 guage pipe including fastening, hold fast, clumps, Ninety One Only
coach bolts for fixing to wall including touching finishing to wall etc complete approved by
51 100.00 Providing & laying Granite shelves to C.B. with making the grooves in the walls and fixing SqM 2197.45 Rupees Two Thousand One
the same complete. Hundred Ninety Seven
Paise Fourty Five Only
52 256.00 Providing and fixing concealed center point to wall ceiling & floor CPVC (SDR 13.5) PIPE Rmt 170.36 Rupees One Hundred
having National Sanitation Foundation (NSF) seal for potable water of following dia. Seventy Paise Thirty Six
nominal bore tube fittings and clamps including making good the wall, ceiling and floor etc. Only
complete.[A] 15 mm.
53 156.00 Providing and fixing concealed center point to wall ceiling & floor CPVC (SDR 13.5) PIPE Rmt 253.82 Rupees Two Hundred Fifty
having National Sanitation Foundation (NSF) seal for potable water of following dia. Three Paise Eighty Two
nominal bore tube fittings and clamps including making good the wall, ceiling and floor etc. Only
complete.[C] 25 mm.
54 160.00 Providing and fixing concealed center point to wall ceiling & floor CPVC (SDR 13.5) PIPE Rmt 447.72 Rupees Four Hundred
having National Sanitation Foundation (NSF) seal for potable water of following dia. Fourty Seven Paise Seventy
nominal bore tube fittings and clamps including making good the wall, ceiling and floor etc. Two Only
complete.[E] 40 mm.
55 200.00 Providing and fixing concealed center point to wall ceiling & floor CPVC (SDR 13.5) PIPE Rmt 660.58 Rupees Six Hundred Sixty
having National Sanitation Foundation (NSF) seal for potable water of following dia. Paise Fifty Eight Only
nominal bore tube fittings and clamps including making good the wall, ceiling and floor etc.
complete.[F] 50 mm.
56 300.00 Providing laying and jointing in true line and level 15mm dia. U.P.V.C. Pipe ( SCH- 40) for Rmt 72.65 Rupees Seventy Two Paise
cold water including fittings as approved by Engineer In Charge. Pipe shall be fixed on the Sixty Five Only
wall with the help of clamp at every two metre C/C or shall be concealed as directed
including necessary fittings etc. including testing of pipe and joints and fixing the same with
adhesive solvent, including cost of all materials.
57 210.00 Providing laying and jointing in true line and level 25mm dia. U.P.V.C. Pipe ( SCH- 40) for Rmt 91.84 Rupees Ninety One Paise
cold water including fittings as approved by Engineer In Charge. Pipe shall be fixed on the Eighty Four Only
wall with the help of clamp at every two metre C/C or shall be concealed as directed
including necessary fittings etc. including testing of pipe and joints and fixing the same with
adhesive solvent, including cost of all materials.
Item Quantitie Item of Works Unit Estimated Rates Total Amount
Item Quantitie Item of Works Unit Estimated Rates Total Amount
No. Estimated Rs. in Figure Rs. In Words Accourding to
58 180.00 Providing laying and jointing in true line and level 40mm dia. U.P.V.C. Pipe ( SCH- 40) for Rmt 148.12 Rupees One Hundred Estimated
cold water including fittings as approved by Engineer In Charge. Pipe shall be fixed on the Fourty Eight Paise Twelve
wall with the help of clamp at every two metre C/C or shall be concealed as directed Only
including necessary fittings etc. including testing of pipe and joints and fixing the same with
adhesive solvent, including cost of all materials.
59 440.00 Providing laying and jointing in true line and level 50mm dia. U.P.V.C. Pipe ( SCH- 40) for Rmt 195.67 Rupees One Hundred
cold water including fittings as approved by Engineer In Charge. Pipe shall be fixed on the Ninety Five Paise Sixty
wall with the help of clamp at every two metre C/C or shall be concealed as directed Seven Only
including necessary fittings etc. including testing of pipe and joints and fixing the same with
adhesive solvent, including cost of all materials.
60 224.00 Providing and fixing to wall ceiling and floor 10.0 Kg. F/Cm2 working pressure polythene Rmt 280.23 Rupees Two Hundred
pipes of the following outside Dia. Low densidy, complete with special falnge compression Eighty Paise Twenty Three
type fittings, wall clipsetc. including making good the wall ceiling and floor.(F) 75mm Only
61 458.00 Providing and supplying & Fitting in standard length ISI mark rigid unplasticised PVC pipes Rmt 297.80 Rupees Two Hundred
suitable for potable water with ring fit joints including cost of rings, as per IS specification Ninety Seven Paise Eighty
no. 4985/1988 including llocal and central taxes transportation, freight charges, octrol, Only
inspection charges, loading, unloading conveyance to the site and including cost of joining
materials etc. complete.
PVC pipe Test pressure 6 Kg/cm3-110mm Dia
62 312.00 Providing and supplying & Fitting in standard length ISI mark rigid unplasticised PVC pipes Rmt 613.27 Rupees Six Hundred
suitable for potable water with ring fit joints including cost of rings, as per IS specification Thirteen Paise Twenty
no. 4985/1988 including llocal and central taxes transportation, freight charges, octrol, Seven Only
inspection charges, loading, unloading conveyance to the site and including cost of joining
materials etc. complete.
PVC pipe Test pressure 6 Kg/cm3-160mm Dia
63 16.00 Providing and fixing in position cowel went to pipes.(B) 75mm dia. Each 393.04 Rupees Three Hundred
Ninety Three Paise Four
64 20.00 Providing and fixing in position cowel went to pipes.(C) 100mm dia Each 505.17 Rupees Five Hundred Five
Paise Seventeen Only
65 20.00 Providing and fixing C.P. brass waste for washbasin or sink. (B) 40mm dia. Each 89.83 Rupees Eighty Nine Paise
Eighty Three Only
66 52.00 Providing and fixing PVC SWR Nahni trap IS 14735 for drain - 100 mm diameter with jali Each 586.27 Rupees Five Hundred
of the following nominal diameter of self cleansing design with C.I scread down or hinged Eighty Six Paise Twenty
grating including the cost of cutting and making good the walls. Seven Only
Item Quantitie Item of Works Unit Estimated Rates Total Amount
Item Quantitie Item of Works Unit Estimated Rates Total Amount
No. Estimated Rs. in Figure Rs. In Words Accourding to
67 36.00 Providing and fixing brass screw down stop tap.(A) 15mm dia. Each 205.83 Rupees Two Hundred Five Estimated
Paise Eighty Three Only
68 24.00 Providing and fixing Gun metal check or non-return fullway wheel valve.(A) 15mm dia Each 186.83 Rupees One Hundred
Eighty Six Paise Eighty
69 24.00 Providing and fixing Gun metal check or non-return fullway wheel valve.(C) 25mm dia. Each 420.63 Rupees Four Hundred
Twenty Paise Sixty Three
70 22.00 Providing and fixing Gun metal check or non-return fullway wheel valve.(E) 40mm dia. Each 663.43 Rupees Six Hundred Sixty
Three Paise Fourty Three
71 8.00 Providing and fixing chromium plated brass half trun flush cock of approved quality Each 254.78 Rupees Two Hundred Fifty
including fixing in pipe line etc. complete.(i) 20mm dia. Four Paise Seventy Eight
72 44.00 Providing and fixing screw down bib taps of following size.(A) Brass screw down bib tap Each 186.83 Rupees One Hundred
polished bright. (i) 15mm dia. Eighty Six Paise Eighty
73 24.00 Providing and fixing pillar tap, capstan head, screw down high pressure with screws, shanks Each 308.73 Rupees Three Hundred
and back nuts. (i) 15mm dia. Eight Paise Seventy Three
74 8.00 Providing and fixing C.P. brass shower rose with 15mm or 20mm inlet.(A) 100mm dia. Each Each 282.16 Rupees Two Hundred
Eighty Two Paise Sixteen
75 16.00 Providing and fixing 600mm x 450mm bevelled edge mirrror of superior glass mounted on Each 859.41 Rupees Eight Hundred Fifty
6mm thick A.C. sheet or plywood sheet and fixing to wooden pluge with C.P. brass screws Nine Paise Fourty One Only
76 12.00 Providing and fixing washbasin with single hole for pillar tap with C.I. or M.S. brackets Each 1581.77 Rupees One Thousand Five
painted white including sutting holes and making good the same but excluding fittings.(A) Hundred Eighty One Paise
Vitreous China:(ii) Flat Back washbasin 550 mm x v 400mm size. (i) In white colour. Seventy Seven Only
77 8.00 Providing and fixing Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as Each 2052.53 Rupees Two Thousand
per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings Fifty Two Paise Fifty Three
and brackets,rubber Ring for bracket, cutting and making good the walls complete as Only
directed by Engineer in charge.
78 8.00 Provision and fixing water closet squatting orissa pan (Indian type W.C pan) size 580mm Each 1706.58 Rupees One Thousand
integral footrest and 100 mm P or S trap and in cluding 25 mm dia CP brass flush valve Seven Hundred Six Paise
and GI inlet connection etc. comp. (A) Vitreous china long pattern white or color Fifty Eight Only
Item Quantitie Item of Works Unit Estimated Rates Total Amount
Item Quantitie Item of Works Unit Estimated Rates Total Amount
No. Estimated Rs. in Figure Rs. In Words Accourding to
79 16.00 Providing and fixing C.P. brass towel rail comlete with C.P. brass brackets fixed to wooden Each 616.42 Rupees Six Hundred Estimated
plugs with C.P. brass scews.(B) 600mm x 20mm size. Sixteen Paise Fourty Two
80 16000.00 Providing erecting and fixing double coated Syntex PVC. (ISI) water tank of required Lit 3.95 Rupees Three Paise Ninety
capacity each with all necessary fittings and connection etc. complete on terrace. Five Only
(Confirming IS 12701) aprooved makes only.
81 16.00 Constructing brick masonry chamber for underground C.I. Inspection chamber and bends each 2932.93 Rupees Two Thousand
with bricks having crushing strength not less than 35Kg/Cm2 in C.M. 1:5 C.I. cover with Nine Hundred Thirty Two
frame (Light duty) 455mm x 610mm intenal dimensions total weight of cover with frame to Paise Ninety Three Only
be not less than 38Kg. (Wt. of cover 23 Kg.) and Wt. of frame 15Kg. ) (R.C.C. top slabe
with 1:2:4 mix (1-cement :2- coarse sand :4-graded stone aggregate 20mm size foundation
concrete 1:5:10 inside plaster 15mm thick with cement mortar 1:3 finished smooth with a
floating coat of neat cement on walls and bed concrete etc. complete.(i) Inside dimensions
455mmx 610mm and 450mm deep for single pipe line.
82 12.00 Providing & fixing stainless steel (stainless steel plate of 302 No. ) letter of 45c.m. size No 2027.98 Rupees Two Thousand
finished with radium sticker including necessary scaffolding for fixing with epoxy material Twenty Seven Paise Ninety
etc. comp. as directed by engineer in charge (Additional Article of Gujarati letter are Eight Only
consider as a half letter)
83 323.00 Providing and fixing pre-cast Rubber Dye / steel Dye inter locking concrete block 60mm SqM 706.93 Rupees Seven Hundred Six
thick with grade of concrete M250 pnumatic compressed/vibrated mechanically and as per Paise Ninety Three Only
approved design Confirming to IS 15658 : 2006 including 35 mm Sand layer for levelling
and filling the joint with sand in proper line and level as per guidlines of IRC : SP 63-2018
etc. Complete. equivalent to vyara and saple must selected by office.
84 2.00 Providing sock pit of 5.00 Cu.M. Volume including excavating and filling brickbats with Each 3198.83 Rupees Three Thousand
dry masonry work at top for 45cm. Height including covering the top with stone including One Hundred Ninety Eight
providing vatas in C.M. 1:3 with finishing curing etc. complete as directed. Paise Eighty Three Only
85 314.00 Box cutting the road surface to proper slope and camber for making a base for road work Cum 109.24 Rupees One Hundred Nine
including removing the excavated stuff and depositing on the road side slope as directed Paise Twenty Four Only
86 314.00 Providing and Laying W.B.M., in one layers, using B.T.M.C. metal of size 40mm to 63mm Cum 1255.20 Rupees One Thousand Two
in layers including 16% stone screening 13.2mm size and 8% stone dust as filler, including Hundred Fifty Five Paise
spreading, watering and cosolidation by vibratory roller as per MoRTH specifications etc. Twenty Only
complete as directed by Engineer-in-charge.
Item Quantitie Item of Works Unit Estimated Rates Total Amount
Item Quantitie Item of Works Unit Estimated Rates Total Amount
No. Estimated Rs. in Figure Rs. In Words Accourding to
87 80.00 Supplying and fixing reinforced concrete heavy duty nonpressure pipes with collars for Rmt 659.99 Rupees Six Hundred Fifty Estimated
culverts carrying heavy traffic as per IS 458-1991 specifications including setting the pipes Nine Paise Ninety Nine
in C.M. 1:2 watering and laying (to level or slopes) of class NP3 of following internal Only
daimeters.(i) 300mm dia.
88 16.00 Constructing Brick masonry road gully chamber 450mm x 450mm x 775mm with vertical No 2545.86 Rupees Two Thousand Five
gating complete. Hundred Fourty Five Paise
Eighty Six Only
89 314.00 Providing and laying in position Control concrete M-300 grade concrete for using cement Cum 5279.73 Rupees Five Thousand Two
content as per approved improve workability without impiring strength and durability as per Hundred Seventy Nine
direction of the engineer-in-charge. (Min cement level as per latestIS 456 shall be Paise Seventy Three Only
maintained) (Cement level 410kg) for require thickness Trimix C.C. Road with trimix work
with power trowling sheet form with M.S. Channles, surface vibrator with providing road
expansion joint having size thickness h/3 deep minimum by concrete cutter machine and
filled with Bitumin, finishing with Surface hardner 1 sqmt./1.5 kg etc. necessary all
eqipments, all labour charges complete.
90 175.23 Road marking with hot applied thermoplastic paints with reflectorising glass beads on SqM 367.72 Rupees Three Hundred
bitumin surface providing and laying a hot applied thermoplastic compound 2.5 mm thick Sixty Seven Paise Seventy
including reflectorising glass beads @ 250gms per sqm area, thickness of 2.5mm is Two Only
excluding of surface applied glass beds as per IRC:35-2015. The finished surface to be
level, uniform and free from streaks and holes. zebra patta /bump patta lane/center line/ edge
line/cut patta. The white color marking should provide liminance coefficinet on cemend
road shalll be min 130 mcd/m2/lux and Asphalt road shall be min 100 mcd/m2/lux during
the service life during the day time. The marking should meet the performance criteria for
night time reflectivity, wet reflectivity and skid resistance as mentioned in the section-15 of
IRC 35-2015. Warranty for the Retro reflectivity should be two years.
91 692.00 Providing and fixing pre-cast concrete kerb stone of gray cement based concrete block 30cm Rmt 374.92 Rupees Three Hundred
length,30cm height and 15cm thick of M250 grade concret as per approved design and Seventy Four Paise Ninety
including excavation for fixing in proper line and level,filling the joint with C:M 1:3 Two Only
(1cement:3fine sand) etc complete.
Item Quantitie Item of Works Unit Estimated Rates Total Amount
Item Quantitie Item of Works Unit Estimated Rates Total Amount
No. Estimated Rs. in Figure Rs. In Words Accourding to
92 6.00 Providing and fixing Frame : 45x90 mm solid wpc (Wood plastic composite) door frame SqM 5115.52 Rupees Five Thousand One Estimated
with rebate of 37mm. The door frame having density of 850 km/Cum. Including architrave Hundred Fifteen Paise Fifty
of 45 x 16mm (press fit fixing(. All joints are miter joints. Fully finished with selected PVC Two Only
Laminate foil. Brands : Flexibond/ Path / Kaka / Ecoste / Ecotimvber with 5 years warrenty.
Single shutter : 28 mm thick Solid WPC (wood plastic composite) door shutter, finished
with HPL lamination & UV coating. It should be having density of 850 Kg/Cum. Fully
finished with selected PVC leminate foil Flexibond/ Path / Kaka / Ecoste / Ecotimvber with
5 years warrenty.
93 227.00 Providing & fixing M.S. Grill for with necessary fitting with necessary fitting with one coat Kg 130.38 Rupees One Hundred
of primer and two coat oil paint as per details given by architect. as per attached detail Thirty Paise Thirty Eight
architectural drawing. Only
94 100.00 Supplying and fixing reinforced concrete heavy duty nonpressure pipes with collars for Rmt 2107.87 Rupees Two Thousand One
culverts including setting and joining the pipes in C.M. 1:2 watering and laying (To level of Hundred Seven Paise
slops of I.S. 458 / 1971 Class NP3 casted by vertically vibrated technology of following Eighty Seven Only
internal diameter. (iv) 600 mm dia.
95 250.00 Drilling of 215mm dia bore hole in over burden strata (alternative layer of lime stone and Rmt 551.46 Rupees Five Hundred Fifty
yellow stridly formation) by DTH regi. up to required depth including fixing of 175/180 dia One Paise Fourty Six Only
ERW/PVC pipe if required drilling by 165mm dia bore hole in hard rock strata DTH drilling
method up to total 120 mt.
96 220.00 HDPE Pipe for require dia. Rmt 551.46 Rupees Five Hundred Fifty
One Paise Fourty Six Only
97 1.00 Providing and fixing of M.S. Bore plug of required capacity etc. complete. No 1919.00 Rupees One Thousand Nine
Hundred Nineteen Only
98 120.00 Supplying and fixing reinforced concrete heavy duty nonpressure pipes with collars for No 1968.38 Rupees One Thousand Nine
culverts carrying heavy traffic as per IS 458-1991 specifications including setting the pipes Hundred Sixty Eight Paise
in C.M. 1:2 watering and laying (to level or slopes) of class NP3 of following internal Thirty Eight Only
daimeters.(iii) 600mm dia.
99 6.00 Providing and constructing 'A' type Sewer manholes, scraper manhales and unit house No 18995.07 Rupees Eighteen Thousand
connection chamber, as per the type design m brick masonry m CM15 and inside and Nine Hundred Ninety Five
outside 20mm thick plastering in C. M 1-3 necessary 100 mm coping with reinforcement in Paise Seven Only
RC CM 200 fixing C 1 steps and fixing manhole frame and covers over manholes and house
connection chambers and fixing Manhole covers over scraper manhole etc complete.
providing and fixing safety chain wherever necessary as per the stipulations in the type
design complete as per latest CPHEEO manual.
Item Quantitie Item of Works Unit Estimated Rates Total Amount
Item Quantitie Item of Works Unit Estimated Rates Total Amount
No. Estimated Rs. in Figure Rs. In Words Accourding to
100 621.00 Plantation of carpet type lawn including labour materials , watering and growing etc. and SqM 113.12 Rupees One Hundred Estimated
maintaining same upto six months. Thirteen Paise Twelve Only
101 156.00 Plantation of flower bed with selected flower plant including planting the same at 45 CM SqM 441.37 Rupees Four Hundred
apart and growing the same including maintenance upto six months. Fourty One Paise Thirty
102 10.00 Planting of hedge with selected hedge plant like Golden , Duranta, Red Bhaji or selected Rmt 207.05 Rupees Two Hundred
plant @ 45 CM apart and maintenance upto six months. Seven Paise Five Only
103 10.00 Planting of selected shrubb trees like Ticoma, Nerium or other selected plant including No 70.70 Rupees Seventy Paise
preparing pit of size 30 x 30 x 30 CM and filing with selected garden soil including manure, Seventy Only
fertilizer and maintenance up to six months.
104 10.00 Providing Three plants having minimum 1.00 mt. hight and healthy growth of various kinds No 80.80 Rupees Eighty Paise Eighty
as like peltroform, Gulmahore, Karanj, Ambla, Rain tree, Sapparni, Cherry, Cryjeliya, Only
Spethodiya, Paras Pipala, Garmali, Neem, Borsalli, Kadam, Buch, Chanpo, Asopalav and as
105 10.00 Providing tree plants having minimum 1.00 mt height and health growth of bottle palm tree, No 2903.75 Rupees Two Thousand
Cycus palm and other palm tree planting including 30 x 30 x 30 Cm. pit filling with selected Nine Hundred Three Paise
garden soil including manure, fertilizer and maintenance upto six month. Seventy Five Only
106 4.00 Providing and constructing and junction chamber of size 0.45x0.45x0.45 mt. including No 2731.34 Rupees Two Thousand
necessary excavating 23 Cum. brickwall, beding CC 1:2:4, top RCC slab, 15mm thick Seven Hundred Thirty One
plaster and connection of rain water pipes as per detail drawings and as directed by engineer Paise Thirty Four Only
107 2.00 Providing rain water harvesting filter chamber of 2.10x2.10 Mt size and 1.20 Mt depth No 13212.57 Rupees Thirteen Thousand
including necessary excavation 23cm brickwall beding CC 1:2:4 top RCC slab. 15mm thick Two Hundred Twelve Paise
plaster and filling up to 0.30 mt Kapachi 25 to 40mm size 0.30 mt. Kapachi 10 to 12mm size Fifty Seven Only
and coarse sand 0.60 mt. etc. as directed.
108 118.00 Point wiring for Light / Bell with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (Green) both Pt. 491.87 Rupees Four Hundred
are of ISI marked 1.1 KV grade FRLS PVC insulated multi strand copper wires up to 10 mtr Ninety One Paise Eighty
length , in below type of pipe erected with 6A Modular type switch / bell push & Seven Only
accessories and earth continuity of following type, erected on PVC / Metallic/Wooden box,
single mounting base frame covered with textured/metallic/white front plate modules
erected on / in wall / ceiling as per pipe erected, with necessary Lamp holder/ceiling rose /
H.D.Connector as directed.
(j) in existing pipe erected concealed in wall/ceiling complete
Item Quantitie Item of Works Unit Estimated Rates Total Amount
Item Quantitie Item of Works Unit Estimated Rates Total Amount
No. Estimated Rs. in Figure Rs. In Words Accourding to
109 32.00 W/C (Half Point) Pt. 245.94 Rupees Two Hundred Estimated
Point wiring for Light / Bell with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (Green) both Fourty Five Paise Ninety
are of ISI marked 1.1 KV grade FRLS PVC insulated multi strand copper wires up to 10 mtr Four Only
length , in below type of pipe erected with 6A Modular type switch / bell push &
accessories and earth continuity of following type, erected on PVC / Metallic/Wooden box,
single mounting base frame covered with textured/metallic/white front plate modules
erected on / in wall / ceiling as per pipe erected, with necessary Lamp holder/ceiling rose /
H.D.Connector as directed.
(j) in existing pipe erected concealed in wall/ceiling complete
110 25.00 Point wiring for FAN with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (Green) both are of .ISI Pt. 667.61 Rupees Six Hundred Sixty
marked 1.1 KV Grade FRLS PVC insulated multi strand copper wires up to 10 mtr length, Seven Paise Sixty One Only
in below type of pipe erected with 6A Modular type switch and hum free EME step type
electronic fan regulator mounted and accessories with earth continuity of following type
erected on PVC / Metallic/Wooden box, single mounting base frame covered with
textured/metallic/white front plate modules erected on / in wall / ceiling as per pipe erected.
with necessary ceiling rose / H.D.Connector as directed.
(j) in existing pipe erected concealed in wall/ceiling complete Cat. III
111 38.00 Point wiring for Individual Plug with & earth wire of 1.5 sq.mm (Green) both are of ISI Pt. 511.06 Rupees Five Hundred
marked 1.1 KV grade FRLS PVC insulated multi strand copper wires up to 10 mtr length, in Eleven Paise Six Only
below type of pipe erected complete with Modular type switch & 5 pin Plug erected on
PVC / Metallic/Wooden box covered with appropriate front plate modules erected on / in
wall / ceiling as per pipe erected with following type of accessories.
[I] For 6A Plug and 6 a switch with 2-1.5 sq.mm Cu. Wire from nearby switchboard/mcb
(j) in existing pipe erected concealed in wall/ceiling complete Cat. III
112 60.00 Point wiring for Individual Plug with & earth wire of 1.5 sq.mm (Green) both are of ISI Pt. 681.75 Rupees Six Hundred Eighty
marked 1.1 KV grade FRLS PVC insulated multi strand copper wires up to 10 mtr length, in One Paise Seventy Five
below type of pipe erected complete with Modular type switch & 5 pin Plug erected on Only
PVC / Metallic/Wooden box covered with appropriate front plate modules erected on / in
wall / ceiling as per pipe erected with following type of accessories.
[II] For 16A Plug and 16 amp switch with 2-2.5 sq.mm Cu. Wire from mcb db board.
(j) in existing pipe erected concealed in wall/ceiling complete
113 108.00 Point wiring for on board Looped Plug with 6A Modular type switch & 5 pin socket erected Pt. 309.06 Rupees Three Hundred
on PVC / Metallic/Wooden box, single mounting base frame covered with textured / Nine Paise Six Only
metallic/white front plate modules erected on / in wall / ceiling with following type
Item Quantitie Item of Works Unit Estimated Rates Total Amount
Item Quantitie Item of Works Unit Estimated Rates Total Amount
No. Estimated Rs. in Figure Rs. In Words Accourding to
114 30.00 Point wiring for Two Way Controlled Light Point with 2-1.5 sq.mm & earth wire of 1.5 Pt 617.11 Rupees Six Hundred Estimated
sq.mm (green) both are of .ISI marked 1.1 KV grade FRLS PVC insulated multi strand Seventeen Paise Eleven
copper wires erected in below type of pipe with 6A Modular type switches and following Only
type of accessories erected on PVC / Metallic/Wooden box, single mounting base frame
covered with textured / metallic/white front plate modules erected on / in wall / ceiling as
per pipe erected. with necessary batten/angle holder or ceiling rose or H.D.Connector as
(j) in existing pipe erected concealed in wall/ceiling complete
115 8.00 Providing following type of Modular Type Accessories mounted with PVC / Pt 210.08 Rupees Two Hundred Ten
metallic/Wooden box, single mounting base frame covered with textured / metallic/white Paise Eight Only
front plate , modules erected with necessary connections as per site situation directed by
Engineer In charge.
(3) Two Pin/RJ-11 Telephone Socket
[B] For Two Gang Cat.III
116 8.00 Providing following type of Modular Type Accessories mounted with PVC / Ea 160.59 Rupees One Hundred Sixty
metallic/Wooden box, single mounting base frame covered with textured / metallic/white Paise Fifty Nine Only
front plate , modules erected with necessary connections as per site situation directed by
Engineer In charge.
(4) TV Co-axial Socket outlet Cat.III
117 12.00 Providing following type of Modular Type Accessories mounted with PVC / Ea 398.95 Rupees Three Hundred
metallic/Wooden box, single mounting base frame covered with textured / metallic/white Ninety Eight Paise Ninety
front plate , modules erected with necessary connections as per site situation directed by Five Only
Engineer In charge.
(5) Electronic hum Free steps EME Fan regulator Cat.III
118 40.00 Providing following type of Modular Type Accessories mounted with PVC / Ea 25.25 Rupees Twenty Five Paise
metallic/Wooden box, single mounting base frame covered with textured / metallic/white Twenty Five Only
front plate , modules erected with necessary connections as per site situation directed by
Engineer In charge.
(7) Blank Plate Single Cat.III
119 2622.00 Providing and erecting ISI mark Medium class RIGID PVC PIPES of following size Mtr 24.24 Rupees Twenty Four Paise
complete to be erected on/in wall or ceiling erected with necessary PVC fittings & Junction Twenty Four Only
boxes fixed with adhesive solution & Clamps with following dia of pipes, in approved
manner as directed
(a)20 mm ( concealed in wall/ceilin)
120 160.00 Providing and erecting ISI mark Medium class RIGID PVC PIPES of following size Mtr 33.33 Rupees Thirty Three Paise
complete to be erected on/in wall or ceiling erected with necessary PVC fittings & Junction Thirty Three Only
boxes fixed with adhesive solution & Clamps with following dia of pipes, in approved
manner as directed
(b) 25 mm ( concealed in wall/ceilin)
Item Quantitie Item of Works Unit Estimated Rates Total Amount
Item Quantitie Item of Works Unit Estimated Rates Total Amount
No. Estimated Rs. in Figure Rs. In Words Accourding to
121 20.00 Providing & erecting PVC Corrugated Flexible Conduit with required nos. of coupling, Mtr 17.17 Rupees Seventeen Paise Estimated
PVC bushes, Check-nuts etc. complete of following sizes. Seventeen Only
122 640.00 Providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Mtr 78.78 Rupees Seventy Eight Paise
Copper conductor wire in following type of pipe to be erected concealed in /flushed on Seventy Eight Only
wall/ceiling, with 1.5 sq. mm copper conductor FRLS PVC insulated stranded wire of green
colour for earth continuity of following size
(E) in existing pipe
(b) 2 wire 2.5 sq. mm
123 160.00 providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Mtr 152.51 Rupees One Hundred Fifty
Copper conductor wire in following type of pipe to be erected in / on wall / ceiling with 2.5 Two Paise Fifty One Only
sq. mm copper conductor FRLS PVC insulated stranded wire of green colour for earth
continuity of following size
(E) in existing pipe
(b) 2 wire 6 sq. mm
124 12.00 Providing and erecting Mains with ISI marked, 1.5KV grade electrolyte multi stranded, Mtr 22.22 Rupees Twenty Two Paise
annealed copper conductor with heat resistant PVC insulated conforms to IS 694, IEC - 227 Twenty Two Only
erected in existing pipe of following size (Specifically for control panel, relays, power
switchgears, motor starters & control wiring) with required size of copper lugs, nuts and
bolts if required.
(b) One wire 1.50 sq. mm
125 6.00 Providing and erecting Mains with ISI marked, 1.5KV grade electrolyte multi stranded, Mtr 70.70 Rupees Seventy Paise
annealed copper conductor with heat resistant PVC insulated conforms to IS 694, IEC - 227 Seventy Only
erected in existing pipe of following size (Specifically for control panel, relays, power
switchgears, motor starters & control wiring) with required size of copper lugs, nuts and
bolts if required.
(e) One wire 6.00 sq. mm
126 24.00 Providing and erecting Mains with ISI marked, 1.5KV grade electrolyte multi stranded, Mtr 115.14 Rupees One Hundred
annealed copper conductor with heat resistant PVC insulated conforms to IS 694, IEC - 227 Fifteen Paise Fourteen Only
erected in existing pipe of following size (Specifically for control panel, relays, power
switchgears, motor starters & control wiring) with required size of copper lugs, nuts and
bolts if required.
(f) One wire 10.00 sq. mm
127 6.00 Providing and erecting Mains with ISI marked, 1.5KV grade electrolyte multi stranded, Mtr 295.93 Rupees Two Hundred
annealed copper conductor with heat resistant PVC insulated conforms to IS 694, IEC - 227 Ninety Five Paise Ninety
erected in existing pipe of following size (Specifically for control panel, relays, power Three Only
switchgears, motor starters & control wiring) with required size of copper lugs, nuts and
bolts if required.
(h) One wire 25.00 sq. mm
Item Quantitie Item of Works Unit Estimated Rates Total Amount
Item Quantitie Item of Works Unit Estimated Rates Total Amount
No. Estimated Rs. in Figure Rs. In Words Accourding to
128 164.00 Supplying and erecting Flexible PVC insulated multi strand multi core 1.1 kv grade ISI Mtr 58.58 Rupees Fifty Eight Paise Estimated
marked copper wires of following size to be erected as directed. Fifty Eight Only
(e) 1.50 Sq.mm 3 core round PVC sheathed
129 120.00 Providing & Erecting approved make following size of TV Co-axial flexible cable Mtr 62.62 Rupees Sixty Two Paise
comprising inner conductor of solid bare copper insulated with Foam PE & Secondary Sixty Two Only
conductor made of poly - Aluminium film bonded Al. Braids @ suitable coverage overall
sheathed with black PVC insulation.
130 120.00 Supplying & erecting approved make Telephone Cable electrolytic copper conductor PE Mtr 20.20 Rupees Twenty Paise
insulation twisted in two pairs, & wrapped with FRLS PVC tape & sheathed with FRLS Twenty Only
PVC or HFFR outer Jacket suitable for telephone wiring & confirming to C-DOT erected in
existing pipe. of following size of conductors & nos.of pairs. With necessary connections.
[A] Conductor Size 0.5 mm
131 8.00 Decorative call bell Ting-tong box type 250 volts complete erected Ea 71.71 Rupees Seventy One Paise
Seventy One Only
132 35.00 Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt Ea 373.70 Rupees Three Hundred
assembled on single MCPCB, with housing used as a heat sink shall be made of thick sheet Seventy Three Paise
Steel conforming to IS: 513/CRCA/ aluminium die cast powder coated and high U.V. & Seventy Only
corrosion resistance with diffuser with company mark/name 160V to 270V, Power Factor
more than 0.95, THD < 15%,
CCT 3000 K to 6500K,
Luminaire efficacy> 85 lumens/watt ,LED
LED driver efficiency > 85 %
( fitting required LM-79 & LM-80 Certificates)(NOTE: Below description have shown
ranges of Wattage capacity of LED fittings.The Engineer incharge may select any wattage
capacity between the ranges shown.)
(A) Tube Light with integral driver
(iv) 22-24 Watts, Surge - 2KV,IP-20, conventional 4 feet
Item Quantitie Item of Works Unit Estimated Rates Total Amount
Item Quantitie Item of Works Unit Estimated Rates Total Amount
No. Estimated Rs. in Figure Rs. In Words Accourding to
133 49.00 Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt Ea 535.30 Rupees Five Hundred Estimated
assembled on single MCPCB, with housing used as a heat sink shall be made of thick sheet Thirty Five Paise Thirty
Steel conforming to IS: 513/CRCA/ aluminium die cast powder coated and high U.V. & Only
corrosion resistance with diffuser with company mark/name 160V to 270V, Power Factor
more than 0.95, THD < 15%,
CCT 3000 K to 6500K,
Luminaire efficacy> 85 lumens/watt ,LED
LED driver efficiency > 85 %
( fitting required LM-79 & LM-80 Certificates)(NOTE: Below description have shown
ranges of Wattage capacity of LED fittings.The Engineer incharge may select any wattage
capacity between the ranges shown.)
(A) Tube Light with integral driver
(v) 36-40 Watts, Surge-2 kV, IP-20, conventional 4 feetCat-lll
134 76.00 Supplying and erecting led lamps with following wattage capacity of 220 to 240 voltage, Ea 112.11 Rupees One Hundred
minimum 15000 burning hours life, 500 V in built-surge protection,Polycarbonate diffuser, Twelve Paise Eleven Only
mounting suitable for E14 / E27 / B22 lamp holders, pf >=
(A) LED Lamps integral type, with PC diffuser suitable LAMP holder
(ii) 5 to 8 watts Cat-III
135 20.00 Supplying and erecting LED street light / Flood light fittings with High power White LEDs Ea 5080.30 Rupees Five Thousand
wattage of 3 Watt and above assembled on single MCPCB, efficiency more than 130 lm/w Eighty Paise Thirty Only
and corrosion free High pressure die cast aluminum housing with smooth finish powder
coated and heat sink extruded aluminium with diffuser and Polycarbonate optics/ lenses,
with toughened glass with company mark/name engraved or embossed 160 to 270 V,Power
Factor more than 0.95, THD < 10 %, CCT 3000 K to 5700K,Uniformity ratio >0.45,
Luminaire efficacy> 100 lumens/watt . LED driver efficiency > 85 %.( fittings required LM-
79 & LM-80 certificates)(NOTE: Below description have shown ranges of Wattage capacity
of LED fittings.The Engineer incharge may select any wattage capacity between the ranges
(A) Street Light (IP-65), Surge protection -4KV integral and ,Light must have 440VAC line
supply with over-voltage protection.
(iii) 60 - 89 watts Cat-lll
Item Quantitie Item of Works Unit Estimated Rates Total Amount
Item Quantitie Item of Works Unit Estimated Rates Total Amount
No. Estimated Rs. in Figure Rs. In Words Accourding to
136 2.00 Supplying and erecting LED street light / Flood light fittings with High power White LEDs Ea 3478.44 Rupees Three Thousand Estimated
wattage of 3 Watt and above assembled on single MCPCB, efficiency more than 130 lm/w Four Hundred Seventy
and corrosion free High pressure die cast aluminum housing with smooth finish powder Eight Paise Fourty Four
coated and heat sink extruded aluminium with diffuser and Polycarbonate optics/ lenses, Only
with toughened glass with company mark/name engraved or embossed 160 to 270 V,Power
Factor more than 0.95, THD < 10 %, CCT 3000 K to 5700K,Uniformity ratio >0.45,
Luminaire efficacy> 100 lumens/watt . LED driver efficiency > 85 %.( fittings required LM-
79 & LM-80 certificates)(NOTE: Below description have shown ranges of Wattage capacity
of LED fittings.The Engineer incharge may select any wattage capacity between the ranges
(C) Post Top Lantern LED fitting comprises of finish cast aluminum spigot and spun
aluminum canopy fixed with opal polycarbonate, pipe arrangement for vertical mounting
driver and accessories wired up to terminal block.IP
(i)20- 30W Cat-lll
137 1.00 Providing and erecting Approved make Four pole moulded case circuit breaker having Ea 6790.23 Rupees Six Thousand
breaking capacity ICU of 25 KA. at 415 V,having normal current rating up to 25 A to 100A. Seven Hundred Ninety
with Fixed thermal & magnetic release suitable to work on A.C. supply 50 Hz. with all Paise Twenty Three Only
internal connections, spreader tinned copper & complete erected in existing 16 G.M.S.
ICS=100% of ICU only Cat III
138 1.00 Providing and erecting Approved make Four pole moulded case circuit breaker having Ea 7469.25 Rupees Seven Thousand
breaking capacity ICU of 25 KA. at 415 V,having normal current rating up to 25 A to 100A. Four Hundred Sixty Nine
with Fixed thermal & magnetic release suitable to work on A.C. supply 50 Hz. with all Paise Twenty Five Only
internal connections, spreader tinned copper & complete erected in existing 16 G.M.S.
ICS=100% of ICU only Cat III
(10% Added For Enclosure)
139 1.00 Providing and erecting Approved make Earth fault Relay suitable to mount with inter Ea 5156.05 Rupees Five Thousand One
connection suitable to following size of moulded case circuit breaker having CT ratio & Hundred Fifty Six Paise
MCCB rating as following along with shunt trip 220V AC. with all internal connections & Five Only
complete erected in existing M.S.housing..
140 1.00 Supplying & erecting approved make Four Pole 415V change over switch interior for panel Ea 2611.86 Rupees Two Thousand Six
mounting with operating mechanism A.C.23 duty confirming to IS for Hundred Eleven Paise
(A)32-40A Cat-lll Eighty Six Only
141 1.10 Supplying and erecting triple pole & neutral 440V / 500V panel mounting Copper Busbars Rn.Mtr 1961.42 Rupees One Thousand Nine
with four equal Nos. of electrolyte bus having current density not more than 1.6 Amp. / Hundred Sixty One Paise
sq.mm (Rated current / cross section area) duly wrapped with colour insulating tape for Fourty Two Only
phase sequence of following current carrying capacity, erected with necessary bus bar
supports /insulators, main cable socket to each bar, erected in existing cubical panel with
necessary connections.
(A) Suitable for 100 Amp. Capacity
Item Quantitie Item of Works Unit Estimated Rates Total Amount
Item Quantitie Item of Works Unit Estimated Rates Total Amount
No. Estimated Rs. in Figure Rs. In Words Accourding to
142 22.00 providing and erecting Miniature circuit breaker single pole 0.5A to 2A system and having Ea 297.95 Rupees Two Hundred Estimated
breaking capacity 10 KA to be erected in existing box. confirming to IS 8828/1996 with ISI Ninety Seven Paise Ninety
143 72.00 providing and erecting Miniature circuit breaker single pole 6A to 25A suitable to operate Ea 123.22 Rupees One Hundred
on 240 V A.C. system and having breaking capacity 10 KA to be erected in existing box. Twenty Three Paise Twenty
confirming to IS 8828/1996 with ISI Mark Two Only
144 22.00 Providing & erecting 240 V MCB double pole switch for motor & inductive load (C Ea 362.59 Rupees Three Hundred
Curve) having 10 KA breaking capacity & confirms to IS : 8828 in existing box having Sixty Two Paise Fifty Nine
following capacity Only
(B) 40 Amp. Cat.III
145 2.00 Providing & erecting 415V MCB Four Pole Switch for Lighting Load (B curve) having Ea 702.96 Rupees Seven Hundred
10KA breaking capacity & confirms to IS :8828 in existing box having following capacity Two Paise Ninety Six Only
(b)40 Amp. Cat.III
146 3.00 Providing & erecting 415 V MCB Four Pole for Motor & Inductive Load (C Curve) Ea 736.29 Rupees Seven Hundred
having 10KA breaking capacity & confirms to IS :8828 in existing box having following Thirty Six Paise Twenty
capacity Nine Only
(b)40 Amp. Cat.III
147 18.00 Sheets steel powder coated enclosure suitable for incorporating One/Two nos. MCB. Ea 176.75 Rupees One Hundred
Seventy Six Paise Seventy
148 2.00 Providing and erecting Sheet Steel powder coated MCB distribution board - flush / surface Ea 1152.41 Rupees One Thousand One
mounted fitted with busbar, neutral link, earth bar and DIN rail, Conforms to IS 8623-1 & 3, Hundred Fifty Two Paise
IEC 61439-1 & 3 without MCB to house appropriate nos. of MCBs.(The DBs should be Fourty One Only
used of same company of MCB to be used) suitable for
(A) single phase incoming and horizontal single phase outgoing
(b) sheet steel double door (IP-43)
149 8.00 Providing and erecting Sheet Steel powder coated MCB distribution board - flush / surface Ea 1492.78 Rupees One Thousand Four
mounted fitted with busbar, neutral link, earth bar and DIN rail, Conforms to IS 8623-1 & 3, Hundred Ninety Two Paise
IEC 61439-1 & 3 without MCB to house appropriate nos. of MCBs.(The DBs should be Seventy Eight Only
used of same company of MCB to be used) suitable for
(A) single phase incoming and horizontal single phase outgoing
(b) sheet steel double door (IP-43)
150 8.00 providing and erecting Approved make RCCBs conforming to IS: 12640 and having Ea 2166.45 Rupees Two Thousand One
sensitivity of 30 mA and Short Circuit withstand capacity of 10 KA and suitable for Hundred Sixty Six Paise
operation on single phase 240 V,50Hz. having characteristic of quick action & tripping with Fourty Five Only
all advance feature & do not incorporate any electronic component. for following Max.
rating erected as directed
(i) 25 Amps.DP Cat. III
Item Quantitie Item of Works Unit Estimated Rates Total Amount
Item Quantitie Item of Works Unit Estimated Rates Total Amount
No. Estimated Rs. in Figure Rs. In Words Accourding to
151 10.00 providing and erecting Approved make RCCBs conforming to IS: 12640 and having Ea 2458.34 Rupees Two Thousand Estimated
sensitivity of 30 mA and Short Circuit withstand capacity of 10 KA and suitable for Four Hundred Fifty Eight
operation on single phase 240 V,50Hz. having characteristic of quick action & tripping with Paise Thirty Four Only
all advance feature & do not incorporate any electronic component. for following Max.
rating erected as directed
(ii) 40Amps. DP Cat. III
152 30.00 Providing and erecting HOT deep Galvanised iron strip/wire 4.064mm to 1.626mm. Kg 77.77 Rupees Seventy Seven
Paise Seventy Seven Only
153 3.00 Supplying & erecting earth pit of minimum bore dia.150mm size approved make Earthing Ea 4591.46 Rupees Four Thousand Five
Electrode consisting Pipe-in-Pipe Technology as per IS 3043-1987 made of corrosion free Hundred Ninety One Paise
hot dipped G.I.Pipes having Outer pipe dia of 50mm having 80-200 Micron galvanising, Fourty Six Only
Inner pipe dia of 25 mm having 200-250 Micron galvanising, connection terminal dia of
12mm with constant ohmic value surrounded by highly conductive compound with high
charge dissipation suitable for following type of applications with chamber and heavy duty
cover. (A)(approved make OEM has to submit test certificate including value of earth
resistance of installation duly stamped and signed by agency and officer Incharge has to
ensure the value of earthing resistane mentioned in test Certificate) & having back filling
compound of (B) Inner chemical (CCM Compound)- Resistivity:- 0.2 ohm / meter testing
as per IEC 62561-2017, Voltage drop:- < 1 volt at no load & dry form, Sulphar content:-
<2%(C) Back fill Compound :- Earthing compound should be capable to retain moisture for
long time Necessary test report must be submitted by Agency.
(a) For Electrical Installation up to 440V in normal soil
Length of pipe - 1 Mtr
Back filling compound - 1 Nos Bag of 15 Kg.
154 1.48 Providing & erecting weather proof, dust & vermin proof, floor mounted front operated Sq.Mtr 10468.65 Rupees Ten Thousand Four
indoor type cubical panel board necessary IP-42 and above protection as per approval from Hundred Sixty Eight Paise
engineer incharge made from 14 SWG thick CRC M.S. sheet for outer body & doors, 16 Sixty Five Only
SWG thick CRC M.S.sheet for internal partitions with necessary accesories , supporting
angles/ flats channel including cutting, bending, drilling, welding, riveting with internal
partitions & cable alley as per requirements & instruction of engineer-in-charge with
erection of supplied switch gears, BUSBARS, suitable size of inter connecting PVC copper
wire / copper-aluminium strips, rubber grommets, rib, bakelite control fuses/MCB for
measuring instruments, earth bus & earth bolts, foundation flange - bolts-base Plates,
sufficient nos. of hinged doors, handles with locking arrangement and rubber gasket,heavy
duty end terminal connection,danger notice board,necessary ventilation,earthing strip
complete. The Panel shall be painted with epoxy powder coating. (The rates excludes the
cost of switchgears, bus bars, inter connecting mains & Copper Aluminium strips, meters,
Fuses etc. The dimension shall be measured excluding base beams) The panel shall be
supplied with following approved manufacturers with following size.
(A) locally fabricated panel board
(i) with 350 mm depth
Item Quantitie Item of Works Unit Estimated Rates Total Amount
Item Quantitie Item of Works Unit Estimated Rates Total Amount
No. Estimated Rs. in Figure Rs. In Words Accourding to
155 4.00 Providing and erecting Steel cover as per drawing using 16 SWG M.S.sheet of following Sq.Mtr 4228.87 Rupees Four Thousand Estimated
depth, to house the switch gear etc. complete with locking arrangement and lock with Two Hundred Twenty Eight
duplicate keys per cupboard and door handles erected with necessary support and painting. Paise Eighty Seven Only
[One coat red oxide and two coat enamel paint]
(A) with angle iron frame
(ii) For 40 cms. Depth
156 60.00 Providing , erecting , fabricating the M.S. structure as per requirement on site incorporating Kg 77.77 Rupees Seventy Seven
proper size of M.S. angles,square,round, flats, bars, channels, sections complete with Paise Seventy Seven Only
cutting, welding, grinding & finishing duly painted with one coat of red oxide with erection
on site as per direction of engineer in charge with necessary grouting, cementing, plastering
& finishing complete.
157 348.00 Providing and erecting FRLS-XLPE (IS:7098)(I)-88 ISI armoured cable multistrand / Solid Mtr 168.67 Rupees One Hundred Sixty
Aluminium conductor for 1.1 kV. to be laid on wall with necessary clamps or in existing Eight Paise Sixty Seven
trench / pipe of following size of cables Only
(C) 4 core 10 Sq. mm
158 20.00 Providing and erecting FRLS-XLPE (IS:7098)(I)-88 ISI armoured cable multistrand / Solid Mtr 229.27 Rupees Two Hundred
Aluminium conductor for 1.1 kV. to be laid on wall with necessary clamps or in existing Twenty Nine Paise Twenty
trench / pipe of following size of cables Seven Only
(B) 4 core 25 Sq. mm
159 320.00 Making trench in Hard Murrum / Tar Road of suitable width of 90 cm or required depth for Mtr 74.74 Rupees Seventy Four Paise
laying any size of cable or locating the fault all over the run and back filling the same and Seventy Four Only
making the surface as normal ground.
160 10.00 Making trench in Hard Murrum / Tar Road of suitable width of 90 cm or required depth for Mtr 357.54 Rupees Three Hundred
laying any size of cable or locating the fault all over the run and back filling the same and Fifty Seven Paise Fifty Four
making the surface as normal ground. Only
(B) If additional machinery like hammer driller or JCB use [Add]
161 340.00 Providing & laying approved make Double walled corrugated pipes (DWC) of Mtr 62.62 Rupees Sixty Two Paise
polyethylene(conforming to IS 14930 II )with necessary connecting accessories of same Sixty Two Only
material at required depth in existing trench for laying of cable. below ground / road
surface for enclosing cable
(A)50 mm outer dia
162 1.00 Providing and, fixing heavy duty flange type brass cable gland with rubber ring for PVC Ea 38.38 Rupees Thirty Eight Paise
insulated armoured cable complete with out going tails, insulating tape etc for following size Thirty Eight Only
(C) 2 to 4 core 10 Sq. mm
163 3.00 Providing and, fixing heavy duty flange type brass cable gland with rubber ring for PVC Ea 51.51 Rupees Fifty One Paise
insulated armoured cable complete with out going tails, insulating tape etc for following size Fifty One Only
(E) 2 to 4 core 25 Sq. mm
164 4.00 Solder less crimping type Aluminium lugs conforming to IS suitable for cable of following Ea 13.13 Rupees Thirteen Paise
size evenly crimped with high pressure tool & connected to switchgear terminals with Thirteen Only
brass/cadmium plated nut bolts in an approved manner.
Item Quantitie Item of Works Unit Estimated Rates Total Amount
Item Quantitie Item of Works Unit Estimated Rates Total Amount
No. Estimated Rs. in Figure Rs. In Words Accourding to
165 16.00 Solder less crimping type Aluminium lugs conforming to IS suitable for cable of following Ea 15.15 Rupees Fifteen Paise Estimated
size evenly crimped with high pressure tool & connected to switchgear terminals with Fifteen Only
brass/cadmium plated nut bolts in an approved manner.
166 37.00 Providing & erecting Approved make Power Saving 45 - 50 Watt Ceiling Fan with double Ea 1948.29 Rupees One Thousand Nine
ball bearing ISI mark with Condenser 230 volt A.C. 50 Hz 1200 mm sweep complete Hundred Fourty Eight Paise
having 3blades with aluminium blades with , canopy & 30 cm. down rod erected with Twenty Nine Only
earthing.(Make shall be approved by Engineer in charge))
167 37.00 Supplying and erecting 19 / 20 mm. nominal bore Medium Class M.S. Pipe down rod Mtr 108.07 Rupees One Hundred Eight
erected duly painted for fan complete with proper insulation without leakage and earthing. Paise Seven Only
168 37.00 Supplying & erecting fan hook box of 10 mm M.S. round bar bounded to the RCC bars up Ea 108.07 Rupees One Hundred Eight
to 50mm length each side and pierced through a 16 Gauge M.S. box / Heavy Duty PVC box Paise Seven Only
complete erected concealed in Ceiling with necessary finishing.
169 37.00 Providing 2.5mm.thick laminated acrylic sheet to cover the fan hook or Fan box. Ea 18.18 Rupees Eighteen Paise
170 4.00 Supply of approved make FRP Pole having following specifications: FRP Light Pole made Ea. 13476.43 Rupees Thirteen Thousand
by CNC filament winding machine using thermoset resin polyester/epoxy resin system) Four Hundred Seventy Six
having minimum 62% glass content. The pole should be in one piece and tapered round in Paise Fourty Three Only
shape, having smooth finish and should be totally free from corrosion as well as non
conductive & shock proof Pole should be provided with FRP Anchor Base and it should be
heavy duty, or MS Material duly painted with Epoxy paint.
Pole should be flame retardant as per IS 6746. Resin used shall be UV resistance and
pigmented. A highly weather resistant polyurethane coating shall be applied to the pole after
applying suitable primer system that ensures proper adhesion of the paint. Minimum coating
thickness shall be 80 to 100 micron. Deflection of the pole shall not exceed more than 10%
of the length of pole for the given load“ Pole should be generally made as per the
dimensional data, performance criteria and some interchangeability features of poles as per
standard ANSI C 136.20 latest version or ASTM D 4923/01 including cable termination
box with necessary accessories . The size of pole and type of installation with foundation as
per manufacturer details and site requirement are as below .
(1) Suitable for base plate mounting single arm Bracket.
[F] Overall length of 5 Mtr. Average Thickness: 7.5mm
OD Dia A/F 89/158 mm ± 2mm approx. approx. Weight of Pole 25 kg approx. (Without
Base) Anchor Base (Size 250X250 & 16mm th.)
Item Quantitie Item of Works Unit Estimated Rates Total Amount
Item Quantitie Item of Works Unit Estimated Rates Total Amount
No. Estimated Rs. in Figure Rs. In Words Accourding to
171 8.00 Supply of approved make FRP Pole having following specifications: FRP Light Pole made Ea. 14288.47 Rupees Fourteen Thousand Estimated
by CNC filament winding machine using thermoset resin polyester/epoxy resin system) Two Hundred Eighty Eight
having minimum 62% glass content. The pole should be in one piece and tapered round in Paise Fourty Seven Only
shape, having smooth finish and should be totally free from corrosion as well as non
conductive & shock proof Pole should be provided with FRP Anchor Base and it should be
heavy duty, or MS Material duly painted with Epoxy paint.
Pole should be flame retardant as per IS 6746. Resin used shall be UV resistance and
pigmented. A highly weather resistant polyurethane coating shall be applied to the pole after
applying suitable primer system that ensures proper adhesion of the paint. Minimum coating
thickness shall be 80 to 100 micron. Deflection of the pole shall not exceed more than 10%
of the length of pole for the given load“ Pole should be generally made as per the
dimensional data, performance criteria and some interchangeability features of poles as per
standard ANSI C 136.20 latest version or ASTM D 4923/01 including cable termination
box with necessary accessories . The size of pole and type of installation with foundation as
per manufacturer details and site requirement are as below .
(2) Suitable for base plate mounting Double arm Bracket.
[A] Overall length of 5 Mtr. Average Thickness: 8mm.
Top/ Bottom OD Dia A/F 114/163mm ± 2mm approx.approx. Weight of Pole 31 kg approx.
(Without Base) Anchor Base (Size 300X300 &18mm th.)
( With Withstand Capacity Triple and Four Bracket Arm )
172 4.00 Providing Aluminium arm bracket of having 2 sets of suitable SS304 hardware for fixing Ea. 2569.44 Rupees Two Thousand Five
the brackets & spread of 1.2 Mtr (Suitable for 89 to 114 mm pole top dia) Hundred Sixty Nine Paise
(A) Single arm bracket Fourty Four Only
173 8.00 Providing Aluminium arm bracket of having 2 sets of suitable SS304 hardware for fixing Ea 3968.29 Rupees Three Thousand
the brackets & spread of 1.2 Mtr (Suitable for 89 to 114 mm pole top dia) Nine Hundred Sixty Eight
(B) Double arm bracket Paise Twenty Nine Only
174 2.00 Supplying & erecting approved make SMC press moulded composite FRP. loop-in, loop- Ea 476.72 Rupees Four Hundred
out approx. 2mm thick box complete with Bakelite connector strip 5way(3P+N+E),DIN rail Seventy Six Paise Seventy
for mounting mob & hinged doors as per requirement having locking arrangements with Two Only
mounting clamp with nuts, bolts & washers suitable for erection on pole with cable clamps&
earth bolt of following size of box.
(C)150mm x 125mm x 100mm [deep]
175 4.00 Supplying and erecting HYLAM sheet on existing angle iron frame.for following thickness sq.mtr 1541.26 Rupees One Thousand Five
(D) 8mm Hundred Fourty One Paise
Twenty Six Only
176 1.00 Supplying & erecting approved make Digital time switch having lithium cell 6 years Ea 3168.37 Rupees Three Thousand
operative and operate battery backup 1 channel day clock with 14 memory programme, One Hundred Sixty Eight
suitable to operate on 240V + 5%, 16A with, floating contacts Minimum switching setup Paise Thirty Seven Only
time 1 minimum & LCD display. Also comprised permanent ON/OFF switching.
Programming switches & housed in fire proof thermoplastic enclosure & transparent cover
erected as required with necessary connection erected as directed.
Item Quantitie Item of Works Unit Estimated Rates Total Amount
Item Quantitie Item of Works Unit Estimated Rates Total Amount
No. Estimated Rs. in Figure Rs. In Words Accourding to
177 1.00 Supplying & erecting power contactor ,AC3 duty for time switch complete erected as per Ea 2782.55 Rupees Two Thousand Estimated
direction Cat III Seven Hundred Eighty Two
(D) 4 pole 440V 40 Amp. Paise Fifty Five Only
178 1.00 Supplying and erecting approved make panel mounting type Digital Voltmeter having 3 Ea 1275.63 Rupees One Thousand Two
digits LED display, 0 to 750 AC Volts range erected on existing panel board with all Hundred Seventy Five Paise
connection, wiring etc .with manufacturers calibration certificate. Sixty Three Only
179 1.00 Supplying and erecting approved make panel mounting type Digital Ammeter having 3 Ea 1558.43 Rupees One Thousand Five
digits LED display, external CT operated, calibrated for 0 to 1000 Amps suitable to operate Hundred Fifty Eight Paise
on 500 Volt AC , erected on existing panel board with all connection, wiring etc .with Fourty Three Only
manufacturers calibration certificate.
180 2.00 Supplying and erecting Ammeter / Voltmeter selector switch for 3 phase AC Supply 500 V Ea 317.14 Rupees Three Hundred
on existing panel board with necessary connections. Seventeen Paise Fourteen
181 3.00 Providing & erecting L.T. Current Transformer with bar primary 50/5 to 1000/5 ratio 15 Ea 274.72 Rupees Two Hundred
VA burden erected in existing CRCA box duly secured with insulating materials connected Seventy Four Paise Seventy
to the meter Two Only
Item Quantitie Item of Works Unit Estimated Rates Total Amount
Item Quantitie Item of Works Unit Estimated Rates Total Amount
No. Estimated Rs. in Figure Rs. In Words Accourding to
182 3.00 Supplying and erecting approved make suitable panel indicator LED type lamp, lens cover, Ea 43.43 Rupees Fourty Three Paise Estimated
complete erected with necessary connections. Fourty Three Only
183 2.00 Providing & erecting open well horizontal mono block pump set with cast iron body, Ea 20621.17 Rupees Twenty Thousand
complete for three phase submersible motor having Six Hundred Twenty One
[D] For 5 HP 3 phase open well horizontal mono block pump set suitable for 1350 LPM to Paise Seventeen Only
310 LPM @ 10 to 42 Mtr head suitable for 50/65 mm dia delivery pipe Cat.II
184 3.00 Supplying & erecting approved make motor control cubical panel (Direct - on - line) made Ea 7722.46 Rupees Seven Thousand
from 16 G. CRCA sheet duly epoxy powder painted inside and outside with hinged doors Seven Hundred Twenty
and locking, arrangement consisting of suitable size of ON- OFF isolator (AC - 3/23duty) Two Paise Fourty Six Only
main fuses, single phasing preventer, indicating lamps for R- Y - B phases, overload relay,
Automatic water level controller, Ammeter, Voltmeter each with two way selector switch
incoming, wires duly socket crimped, main contactor & overload relay, start - stop push
buttons, to be erected on angle iron frame grouted on wall as directed. The isolator,
overload relay & contactors will be of L & T, Siemens or BCH make only.
(A) DOL up to 5.0 H.P.
185 1.00 S.I.T.C. submersible pump set suitable for bore of 150 mm. dia. or more having three phase Ea 36663.00 Rupees Thirty Six
motor capacity not more than 5 H.P. with following capacity . Lifting and Lowering taken Thousand Six Hundred
extra. Sixty Three Only
(A) (8 stage) 240 to 200 LPM discharge at 70 to 78 mtrs. head respectively suitable for
50mm dia. delivery pipe
186 1.00 Lowering of submersible motor pump set at the depth of following ,complete with required. Per Job 2568.43 Rupees Two Thousand Five
Nos. and size of casing pipes erected by means of proper chain pulley block & pipe Hundred Sixty Eight Paise
wrenches after checking of threads of each pipe with coupling to take the load of the pump Fourty Three Only
set and pipe assembly filled up with water
(B)Above 60 mtrs. and Up to 120 mtrs.
187 2.00 Lowering of submersible motor pump set at the depth of following ,complete with required. Per Job 856.48 Rupees Eight Hundred Fifty
Nos. and size of casing pipes erected by means of proper chain pulley block & pipe Six Paise Fourty Eight Only
wrenches after checking of threads of each pipe with coupling to take the load of the pump
set and pipe assembly filled up with water
(D)For Open well Horizontal submersible pump set for sump well
Item Quantitie Item of Works Unit Estimated Rates Total Amount
Item Quantitie Item of Works Unit Estimated Rates Total Amount
No. Estimated Rs. in Figure Rs. In Words Accourding to
188 190.00 Providing and erecting ISI marked PVC insulated PVC Sheathed Flat flexible Submersible Mtr. 146.45 Rupees One Hundred Estimated
copper cable approved make of following Size. Fourty Six Paise Fourty
(C) 3 Core x 4 Sq. mm. Five Only
189 3.00 Providing Water proof straight Joint in PVC insulated flat flexible copper cable by using Ea 189.88 Rupees One Hundred
insulating material, water proofing material, & making the joint complete. Eighty Nine Paise Eighty
(A) Up to 10Sq. mm Eight Only
190 3.00 Supply of following size of TOP & BOTTOM accessories i.e. Adaptor set (CI) long, pump Per Set 1489.75 Rupees One Thousand Four
guard set, starter pipe Rubber ring for submersible pump & UPVC column pipe as directed Hundred Eighty Nine Paise
by Engineer - in - charge with necessary plumbing as desired. Seventy Five Only
191 2.00 SITC of Vertical Air Termination Solid aluminium with Base- 10 mm dia and 1000 mm Ea. 9416.23 Rupees Nine Thousand
long. Air Termination Base tested for conditioning, Ageing Test & Lightning impulse Four Hundred Sixteen Paise
current withstand test: 100 kA of 10/350µs waveform in an accredited Third party Twenty Three Only
laboratory as per 6.3 & 6.4 of IEC 62561-1 2017 protocol with MAST 34mm dia 3000 mm
long- Cold Galvanized
192 50.00 SITC of 10 mm MS Round Solid Conductor having smooth surface Should be tested and Mtr 728.21 Rupees Seven Hundred
use exclusively for lightning protection (Vertical Riser/Down Conductor which shall be Twenty Eight Paise Twenty
concealed in Column OR Flushed on) to meet the requirement of IS IEC 62305 With One Only
Accessories - Earthing stud of dimension SS-75mm OD plate with 10mm dia tail connector
used in structural steel ring earthing system to meet the requirements of IS/IEC 62305. (For
Interconnecting the Column and the Terrace AL Conductor / Strip/Flat), SS Cross
Connector to connect Earth fixing point to vertical raiser/Down conductor, SS Straight
Splicer at every 4 Mtr to connect MS conductor in column, Bonding /Rebar Clamp at every
3 mtr suitable for interconnecting round conductor with reinforcement inside the concrete
for structural earthing system, SS connector -To connect external conductor 8- 10 mm with
earth fixing point. All Accessories should be tested as per IEC 62561-1 2018 Cl. 6.3 for
conditioning & Ageing Test & 6.4 for Lightning impulse current withstand test: 100 kA of
10/350µs waveform(Ageing & Electrical test )
conducted in a sequence manner & tested in the Govt. accredited Third party laboratory to
meet the requirements of IS/IEC
193 4.00 SITC of Galvanized Steel Flat 25x6 mm thickness from earth electrode directly in ground Mtr 154.53 Rupees One Hundred Fifty
as required. Zinc coating: 500 g/m square (Approx:70 micron coating) tested and used Four Paise Fifty Three Only
exclusively for lightning protection earthing system and ring equipotential bonding.
194 2.00 SITC of 14.2 mm dia 3 mtr long Earth electrode of High tensile steel electrode with 250 Per Set 5992.33 Rupees Five Thousand
micron copper bonding & 1 bag of Carbon fill Based environment friendly backfill tested as Nine Hundred Ninety Two
per IEC 62561-7 in NABL accredited Laboratory and suitable stainless Steel double sided Paise Thirty Three Only
clamp. Eco Friendly rust proof heavy duty weather proof Polyethylene Earth Pit Chamber
with following dimensions :254 mm dia (top), 330 mm dia (bottom) & 260 mm (height).
Item Quantitie Item of Works Unit Estimated Rates Total Amount
Item Quantitie Item of Works Unit Estimated Rates Total Amount
No. Estimated Rs. in Figure Rs. In Words Accourding to
Grand Total Estimated
Grand Total Estimated
Amount in Words :
Rupees Three Crore Fourteen Lakh Eleven Thousand Eight Hundred Sixty Eight Paise Eleven Only
I / We am/are willing to carry out the work at ......................................................………………... % above / below (Should
be written in figures and words) of the estimated rates mentioned above. Amount of my/our tender works out as under.
Estimated amount Estimated amount
Put to tender Rs. …………………… Put to tender Rs…………………..
Add……….. % above Rs. …………………… Deduct…….% below Rs…………………..
Total Rs. …………………… Net Rs…………………..
In words……………………………… In words……………………………………….
[1] The Contractor shall exhibit a board with detailed specification and details of work as directed by the Engineer-In-Charge for which no extra payment shall be made.
[2] The labourcess will be deducted as per prevailing rules i.e. 1% of the work done.
[3] GST and Income tax TDS will be deducted at a source while making payments of bills
[4] In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.: PRC-10/2017 Cement Consumption/16/C Date:11/05/2017 as stated in S.O.R.
therefore in R.C.C. items where there is a change as per actual mix design the cost of difference of cement consumption have been deducted from the rate of original item at the rate of
input rate mentioned in all the tender.
Signature of Contractor
Deputy Executive Engineer Executive Engineer
R & B Sub Division R & B Division
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
RAW_HTML
sbd maliya revanue quaters.pdf
10 Sch B.pdf
5 Index to.pdf
6 GENERAL SPECIFICATIONS_BUILDING_WORK.pdf
7 Item vise.pdf
8 QTY.pdf
GR TO BE ATTACHED_compressed (2).pdf
15 Top View_Contour.pdf
LAYOUT PLAN R2 - Mamlatdar Office and maliya.pdf
12 Architect Drg(typeB C) Maliya Staff Qtr.pdf
14 Top View_Mamltadar office qtr Mapni.pdf
sche B ele.pdf
specal condtion of ele work.pdf
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].