Construction of Balance Work of North East Centre of Indian Statistical Institute at Tezpur, Assam

Sl. No. DSR No. Description of Item Unit Balance work DSR Rate DSR Amount Non-DSR/ Non-DSR/

Qty Market rate Market rate

1.00 2.0 EARTH WORK

1.01 2.28 Surface dressing of the ground

2.28.1 including

All kinds ofremoving

soil. vegetation and in- Sqm 0.00 28.15 0.00

1.02 2.6 Earthwork in excavation by mechanical

All kinds of soilexcavator)/manual Cum 0.00 205.45 0.00

1.03 2.25 Filling available excavated earth Cum 78.00 253.95 19808.10

1.04 1.1.2 (excluding

Disposal ofrock) in trenches,

surplus earth byplinth, sides Cum 0.00 271.45 0.00

1.05 2.27 mechanical

Supplying and transport including

filling in loading,

plinth with sand Cum 101.00 2161.20 218281.20

1.06 2.34 under floors,chemical

Supplying including emulsion

2.34.1 sealed containers including

Chlorpyriphos/ Lindanedelivery as Litre 481.10 200.90 96652.99

1.07 2.35 emulsifiable

Diluting and concentrate of 20%emulsion

injecting chemical

2.35.3 for POSTCONSTRUCTIONAL

Treatment of soil under existing floorsanti-

2.35.3.1 using chemical

With emulsion @ one

Chlorpyriphos/Lindane litre20%

Extra1% for concentration

every additional lift of 1.5 m or

2.26.1 partkinds

All thereofof in

soilexcavation /banking cum 0.00 104.50 0.00

2.00 4.0 CONCRETE WORK

2.01 4.1 Providing and laying in position cement

4.1.8 concrete

1:4:8 of specified

(1 Cement grade sand

: 4 coarse excluding

2.02 4.2 III) : 8 graded

Providing andstone

laying aggregate

4.2.3 in retaining

1:2:4 (1 Cement walls, returnsand

: 2 coarse walls,

2.03 4.17 graded

Makingstone aggregate

protection nominal

2.04 4.10 thick of cement

Providing concretedamp-proof

2.05 4.12 course

Extra 40mm thick withand

for providing cementmixing Per 50 kg 2.86 57.15 163.45

2.06 4.13 water proofing

Providing material ina cement

& applying coat of cement

2.07 4.3 residual petroleum

Centering bitumenincluding

and shuttering of grade of

4.3.1 strutting,

Foundation, propping

footing,etc. andof

columnsof Sqm 10.00 307.95 3079.50

Providing and laying in position cement

4.1.6 concrete

1:3:6 of specified

(1 Cement grade sand

: 3 coarse excluding

cement stone aggregate

: 2 coarse sand40(zone-III)

4 graded stone aggregate 20 mm

5.33 Providing and laying in position machine

3.01 5.33.1.1 batched and

All works machine

upto Plinth mixed design mix

level- Concrete of Cum 0.00 7997.30 0.00

3.02 5.33.2.1 M-25 gradeabove

All works with minimum cement

plinth level upto Cum 423.00 10080.15 4263903.45

3.03 5.22 floor V level- Concrete

Reinforcement for RCC of M-25

5.22.6 including straightening,Treated

Thermo-Mechanically cutting,

3.04 5.22A Reinforcement for RCC work including

5.22A.6 straightening, cutting, bending,

Thermo-Mechanically placing in

3.05 5.9 Centering and shuttering including

5.9.1 strutting, propping

Foundation, etc.bases

footing, and removal of

of columns Sqm 0.00 307.95 0.00

5.9.3 etc. for mass concrete

Suspended floors, roofs, Sqm 2037.00 766.55 1561462.35

5.9.5 landings, balconies,

Lintels, and access

beams, plinth platform

5.9.7 girders,(excluding

Stairs, bressumerslandings)

and cantilevers

5.9.6 spiral- staircases.

Columns, Pillars, Piers, Abutments, Sqm 483.00 804.25 388452.75

5.9.4 Posts and Struts

5.9.15 Small lintels not exceeding 1.5 m Sqm 242.00 307.95 74523.90

5.9.16 clear span,

Edges moulding

of slabs and as in cornices,

breaks in floors

5.9.16.1 and walls

Under 20 cm wide metre 709.00 181.90 128967.10

5.9.14 Extra for shuttering in circular work Sqm 16.00 160.85 2573.60

Add forof using

cement inand Quintal

the items of design mix over368.01 688.45cement content

and above the specified 253356.48

3.07 5.11 Extra for additional height in centering,

5.11.1 shuttering

floors,ever required

landing, beams Sqm 1568.06 319.25 500603.16

5.9.2 and balconies (Plan area to be measured)

Walls (any thickness) including attached 0.00 669.55 0.00

pilasters, butteresses, plinth and string

4.00 6.0 BRICK WORK

4.01 6.1 Brick work with common burnt clay

Cement modular) bricks

1:6 (1 of : class

4.02 6.47 coarse sand)

Providing and laying autoclaved aerated Cum 622.15 6994.15 4351410.42

cement blocks masonry with

Digitally signed by

AVANISH AVANISH KUMAR

KUMAR 18:36:42 IST

Sl. No. DSR No. Description of Item Unit Balance work DSR Rate DSR Amount Non-DSR/ Non-DSR/

Qty Market rate Market rate

4.03 6.12 Half brick masonry with common burnt

a) Cement mortar 1:4 (1 cement : 4 Sqm 0.00 837.85 0.00

4.04 6.38 coarse sand)

Providing and laying autoclaved aerated cum 48.48 8890.80 431025.98

cement blocks masonry with 100 mm

4.05 6.15 Extra for providing and placing in Sqm 0.00 86.45 0.00

position 2 Nos 6mm dia. M.S. bars

5.00 7.0 STONE WORK

5.01 7.38 Stone tile work for wall lining upto

7.38.1 10 m thick

8mm height(mirror

special adhesive

7.38.1.1 cut edge)stone of any colour and shade

Granite Sqm 0.00 0.00

6.00 8.0 MARBLE WORK

6.01 8.2 Providing and fixing 18 mm thick gang

8.2.2 saw cut,of mirror

Granite any colourpolished,

6.02 8.5 Extra for providing opening of required each 33.00 808.15 26668.95

Extra& forshape

fixingformarble

6.04 8.10 over and and

Providing above corresponding

stone slab with table

8.10.2 rubbed, Stone

Granite edges of

rounded andshade

approved polished, of Sqm 0.00 3542.85 0.00

6.06 11.24 Extra for pre finished nosing to treads M 154.00 593.30 91368.20

8.3 of steps of edge

Providing marble stone. to 18 mm thick

8.3.2 marble stone

Granite work counters, Vanities etc., M 418.85

8.2 Providing and fixing 18 mm thick gang

8.2.2 saw cut,of

Granite mirror polished,

any colour and premoulded

8.2.2.1 Area of slab upto 0.50 sqm Sqm 4679.35

8.31 Providing and fixing Ist quality Sqm 781.03 1063.45 830581.04

ceramic glazed wall tiles conforming

7.00 9.0 WOOD WORK

7.01 9.1 Providing wood work in frames of

9.1.1 doors, windows,

Second clerestory windows

class teak wood Cum 4.75 131576.95 624990.51

7.02 9.21 Providing and fixing ISI marked flush

35 mmshutters conforming

thick including ISItomarked

7.03 9.96 Stainless

and butt hinges

fixing with necessary

9.96.1 sliding door

300x16 mm bolts ISI marked anodised Each 8.00 260.30 2082.40

7.04 9.97 Providing and fixing aluminium tower

9.97.2 bolts ISImm

250x10 marked anodised (anodic Each 84.00 104.40 8769.60

7.05 9.100 Providing and fixing aluminium

9.100.1 handle

125 mmISI marked anodised (anodic Each 28.00 60.05 1681.40

7.06 9.101 Providing and fixing aluminium

9.101.2 hanging

Twin rubber stopper ISI

7.07 9.103 Providing and fixing bright finished Each 159.00 739.80 117628.20

Providing mortice

& Fixing latch and

decorative highlock

9.127.2 pressure laminated sheet of plain /

7.09 9.53 Providing 40x5 mm flat iron hold fast 40 each 678.00 194.35 131769.30

cm long including fixing to frame

7.10 9.40 Providing and fixing wooden moulded

9.40.1 beading

2nd classtoteak

and window frames with

9.66 Providing and fixing ISI marked oxidised

75 mmhandles conforming to IS:4992 with each 0.00 24.25 0.00

9.67 Providing and fixing oxidised M.S. hasp

9.67.2 and staple

115 mm (safety type) conforming to IS each 0.00 26.00 0.00

9.68 Providing and fixing oxidised M.S.

casement stays (straight peg type) with

Sl. No. DSR No. Description of Item Unit Balance work DSR Rate DSR Amount Non-DSR/ Non-DSR/

Qty Market rate Market rate

9.68.1 300 mm weighing not less than 200 gms each 0.00 59.25 0.00

8.00 10.0 STEEL WORK

8.01 10.25 Steel work welded in built up

10.25.2 sections/

gratings, work,guard

frames, including

ladder, railings, brackets, gates and

10.11 Providing and fixing factory made

10.11.1 ISI marked

Fixing withsteel

long embedded in cement concrete

10.5 Providing and fixing 1mm thick M.S.

10.5.1 sheet door

Using M.S.with frame

angles of 40x40x6

10.27 diagonal braces

Providing and fixing carbon steel

10.27.2 galvanised

10 x 80 mm( minimum coating 5 micron) each 0.00 117.30 0.00

9.00 11.0 FLOORING

9.01 11.41 Providing and laying vitrified floor

11.41.2 tiles of

different sizesmm

600x600 (thickness to be Sqm 0.00 1416.65 0.00

11.46 Providing and laying Vitrified tiles in

11.46.2 different

of Tile (thickness

600x600 mmto be specified Sqm 0.00 1466.50 0.00

11.56 Providing and laying Polished Granite

9.02 11.56.1 stone flooring

Polished in required

Granite stone design and

9.03 11.26 Black, Cherryslab

Kota stone Red,flooring

thick thick base laid over and Sqm 127.50 1706.60 217591.50

9.04 11.27 Kota stone slabs 20 mm thick in Sqm 9.25 2038.55 18856.59

11.37 risers of steps,

Providing skirting,Ceramic

and laying dado and glazed Sqm 1990.49 935.60 1862302.44

11.31 floor tiles

Extra for preof finished

in treads of metre 0.00 157.35 0.00

11.24 steps of

Extra forKota stone/ sand

pre finished stone

nosing to slab.

treads of metre 154.00 593.30 91368.20

9.05 11.38 steps of marble

Providing stone.Ceramic glazed

and laying Sqm 0.00 1107.05 0.00

New 11.3 floor tilesconcrete

Cement of size 300x300 mm (thickness

flooring 1:2:4 (1 cement

11.3.1 : 2 coarse

40 mm thick sand : 4 20

nominal size stone aggregate 0.00 545.00 0.00

10.00 12.0 ROOFING

10.01 12.53 Providing and Fixing 15 mm thick

resting ontegular

periphery edged eco friendly

walls/partitions on a Sqm 141.40 1718.70 243024.18

10.03 12.45 Perimeter

Providing wall angle pre-coated

and fixing false ceilingsteel

1200 including

centre providing and flange

to centre, one fixing of

12.45.3 fixed to

12.5 mm the ceiling with dash

thick tapered fastener

edge gypsum Sqm 0.00 1300.50 0.00

10.04 12.20 moisture

Providingresistant board

and laying pressed clay tiles Sqm 1235.00 620.00 765700.00

12.22 (as per approved

Making pattern 20

khurra 45x45cm mm

12.21 minimum gola

Providing thickness

75x75ofmm5 cmincement

12.21.1 concrete

In 75x751:2:4 (1 cement

mm deep chase : 2 coarse sand : metre 100.00 260.20 26020.00

12.44 Providing and fixing to the inlet Each 10.00 47.90 479.00

10.05 12.52 mouth of rain

Providing water tiled

and fixing pipefalse

Main "T" materials

runners toofbesize 595x595from

12.52.4 ceiling

12.5 mmusing GIfully

thick slotted cleats ofGypsum

Perforated size 27 x Sqm 0.00 1247.50 0.00

Board tile made from plasterboard having

11.00 13.0 FINISHING

11.01 13.4 12 mm cement plaster of mix :

11.02 13.16 6 mm cement plaster of mix:

11.03 13.11 18 mm cement plaster in two coats Sqm 3534.59 442.75 1564937.51

11.04 13.80 under layerand

Providing 12applying

mm thick cement

white cement Sqm 5114.22 123.85 633396.15

11.05 13.83 based putty ofwith

Wall painting average thickness

13.83.2 emulsion

Two coatspaint of interior grade, having Sqm 5467.75 121.55 664604.40

11.06 13.61 Painting with synthetic enamel paint

13.61.1 of approved

Two or morebrand

coats and manufacture

Sl. No. DSR No. Description of Item Unit Balance work DSR Rate DSR Amount Non-DSR/ Non-DSR/

Qty Market rate Market rate

11.07 13.45 Finishing walls with textured exterior

13.45.1 paint of

work (Twoshade :

11.08 13.41 applied @

Distempering with oil bound

13.41.1 washable

New work distemper

(two or moreof coats)

11.09 13.50 and including

Applying water

priming coatthinnable priming

13.50.4 With ready mixed red oxide zinc Sqm 809.00 29.75 24067.75

11.1 13.68 chromate primer

French spirit of approved brand and

13.68.1 Two or more coats on new works Sqm 264.00 368.30 97231.20

including a coat of wood filler

12.00 21.0 ALUMINIUM WORKS

12.01 21.1.2 For shutters of doors, windows &

21.1.2.2 ventilators coated

Powder includingaluminium

providing and fixing Kgs 0.00 564.80 0.00

12.02 21.3 (minimum

Providing andthickness

fixingofglazing

21.3.2 aluminium

With floatdoor, window,

thickness ventilator

Filling the gap in between aluminium

21.8.1 frame5mm

Upto & adjacent

12.04 21.13 Providing and fixing 100mm brass Each 2.00 449.55 899.10

12.05 21.15 locks (best and

Providing make

fixingofaluminium

21.15.1 casement windows

Anodized fastener of

(AC 15 ) aluminium Each 0.00 73.55 0.00

12.06 21.16 Providing and fixing aluminium round

21.16.1 shape handle

Anodized (ACof15

outer dia 100 mm with

) aluminium Each 14.00 88.75 1242.50

21.1 Providing and fixing aluminium work for

fixed portion ventilators and

21.1.1.2 Powder coated aluminium (minimum Kg 466.30

21.18 thickness of

Providing powder

and fixing coating

12 mm 50 micron)

21.12 frameless toughened

Providing and fixing glass door shutter

aluminium tubularof

21.12.2 handle bar

coated outer dia,

minimum 3.0 mm50

thickness Each

17.32 micron aluminium

Providing tubular

and fixing mirrorhandle bar

17.32.4 glass (of approved quality)

Rectangular shape 1500x450 mm and of Each

21.1 Providing and fixing aluminium work for

fixed portion ventilators and

21.1.1.1 Anodised aluminium (anodised kg 1540.00 433.95 668283.00

21.1.2 transparent

For shuttersorofdyed to windows

doors, required shade

21.1.2.1 ventilators including providing

Anodised aluminium (anodisedand fixing 531.80

21.3.3 transparent

float glass to required

panes of 8 mm shade

13.00 22.0 WATER PROOFING

13.01 22.3 Providing and laying water

(i) Ist coursetreatment to verticalcement

of applying and

(ii) IInd@course of 20mm cement plaster

(iii) (1 cement

IIIrd course: of3 applying

or/residual bitumen

(iv) IVth course of 400 micronapplied hot atthick

13.02 22.22A PVC sheetand

Providing (Overlaps at joints

applying fibre of

reinforced Sqm 1191.50 474.15 564949.73

13.03 22.7 elastomeric

Providing and liquid water

laying proofing

integral cement

a) water andproofing

Applying grouting atreatment

b) of neatcement

using 2.75 kg/sqm.

two days / brick bats curing

of proper 25mm to

d) Finishinga second coat of cement

the surface with 20mmslurry

wholelessterrace

cement so mortar

finished ofshall

22.7.1 be flooded

With withthickness

average water for of a minimum

Gradingminimumroof thickness

for water atproofing

22.14.1 treatmentconcrete

Providing and: laying

sand 4 graded stonecement

integral aggregate

Ist layer of 22 for

(ii) 2nd layer andof specified

25 mm rough stone slab

(iii) 1:3 (1 cement:

Finishing top with3stone

coarse sand) of

22.1.1 10 mmrough

Using to 12 kota

nominal size spreading 0.00 1362.95 0.00

22.2 Providing and laying integral cement

based treatment for water proofing on the

Sl. No. DSR No. Description of Item Unit Balance work DSR Rate DSR Amount Non-DSR/ Non-DSR/

Qty Market rate Market rate

22.2.1 Using rough Kota stone 0.00 1780.30 0.00

22.4 Providing and Placing in position suitable

Dumbwater stopscentral

bell with conforming to IS:12200

bulb (180 mm wide, 8 mm thick) 0.00

14.01 MR Providing and laying 250 mm Sqm 152.00 517.90 78720.80

14.02 MR thick compacted

Granite stone slabbed

brickin risers Sqm

of steps, skirting, dado and pillars laid

EXTERNAL DEVELOPMENT & LAKE

1.00 2.0 EARTH WORK

1.01 2.28 Surface dressing of the ground

2.28.1 including

All kinds ofremoving

soil. vegetation and in- Sqm 8347.39 28.15 234979.03

1.02 2.25 Filling available excavated earth Cum 0.00 253.95 0.00

(excluding rock) in trenches, plinth,

2.00 4.0 CONCRETE WORK

2.01 4.1 Providing and laying in position cement

4.1.8 concrete

1:4:8 of specified

(1 Cement grade sand

: 4 coarse excluding

III) : 8 graded stone aggregate 40 mm

3.00 ROAD WORK

3.01 16.1 Preparation and consolidation of sub Sqm 2500.00 180.50 451250.00

grade with power road roller of 8 to 12

tonne capacity after excavating earth to

3.02 16.68 an averageand

Providing of 22.5 cm60mm

laying depth,thick

made cement concrete interlocking

paver block of M -30 grade made by

3.03 16.78 block making

Construction machine sub-base

of granular with strong

providing close graded Material

conforming to specifications, mixing

16.78.3 in a mechanical

With mix plant

material conforming at

(size range 26.5 mm to 0.075 mm )

having CBR Value-20

3.08 16.69 Providing and laying at or near

ground level factory made kerb stone of

M- 25 grade cement concrete in

(Precast to the required

C.C. line,shall

kerb stone level be

approved by Engineer-in-charge).

4.01 2.6 Earth work in excavation by mechanical

All kinds of soilexcavator)/manual Cum 205.45

PLUMBING & SANITARY

1 17.3 Providing and fixing white vitreous china

17.3.1 pedestal

withwater closet (European

ISI marked white solid Each 27 6941.30 187415.10

plastic seat and lid

2 17.7 Providing and fixing wash basin with

17.7.1 C.I. brackets,

White Vitreous15 mmWash

China C.P. basin

630x450 mm with a pair of 15 mm C.P.

3 17.10 Providing and fixing Stainless Steel A

17.10.1 Kitchen (18/8) kitchen

with sink as per IS:

4 17.28 Providing and fixing P.V.C. waste pipe

17.28.2 Flexible wash basin including P.V.C.

Sl. No. DSR No. Description of Item Unit Balance work DSR Rate DSR Amount Non-DSR/ Non-DSR/

Qty Market rate Market rate

17.28.1 Semi rigid pipe

5 17.4 Providing and fixing white vitreous

17.4.1 chinaurinal

wall5corner type

litre white Each 0 5268.85 0.00

P.V.C. automatic flushing cistern

6 17.31 Providing and fixing mirror of superior Each 31 1411.15 43745.65

7 17.34 glass (of approved

Providing quality)

and fixing complete

toilet paper with

8 NS1 Providing and fixing uPVC pipes type -

(a) B conforming

110 dia pipe to IS: 13592 for soil, waste M 372 1177.58 438331.78

9 17.70 Providing and fixing PTMT Bottle Trap

17.70.2 for Wash

Bottle trapbasin

sink. piece moulded Each 34 325.10 11053.40

10 17.72 with heightand

Providing of 270

11 17.73 trapezoidaland

Providing shape 215 mm

fixing PTMTlong,towel

17.73.2 complete

mm long brackets fixed

rail with to length

Providing 78fixing

and mm wideC.P. and

18.49.1 of approved

15 mm nominal quality

boreto conforming to IS Each 29 434.20 12591.80

13 18.51 Providing and fixing C.P. brass long

15 mmbib cock bore

nominal of approved quality Each 3 708.40 2125.20

14 18.52 Providing and fixing C.P. brass stop cock

18.52.1 (concealed)

15 of standard

mm nominal bore design and of Each 29 594.75 17247.75

15 18.53 Providing and fixing C.P. brass angle

15 mmfornominal

bore and gyser points of Each 160 500.35 80056.00

16 18.65 Providing and fixing PTMT soap Dish Each 31 96.75 2999.25

17 17.61 Holder

chaseslength of 138mm,

in brick breadth

100 mm fordiafollowing diameter sand M 20 615.70 12314.00

18 18.76 Cutting holes upto 30 X 30 cm in walls

18.76.1 including

burnt theF.P.S.

clay same.(non Each 28 362.40 10002.24

19 18.78 modular) bricksupto 7.5 X 7.5 cm in

Making chases M 20 171.80 3436.00

20 18.7 walls including

Providing and making good after

fixing Chlorinated

18.77 Polyvinyl

Cutting Chloride

up to 15x15 cm pipes,

18.79 floors and

hole up for passing

embedding pipes up to 150 mm

Internal work - Exposed on wall

18.7.2 20mm nominal outer dia pipes M 13 325.10 4096.26

18.7.3 25mm nominal outer dia pipes M 75 408.55 30641.25

18.7.4 32mm nominal outer dia pipes M 348 500.95 174080.13

18.7.5 40mm nominal outer dia pipes M 160 674.35 107929.72

18.7.6 50mm nominal outer dia pipes M 0 927.00 0.00

21 18.8 Providing and fixing Chlorinated

Polyvinyl Chloride

Concealed (CPVC)cutting

work including pipes,

18.8.1 chases nominal

15mm and making

outergood the walls etc.,

18.8.2 20mm nominal outer dia pipes M 60 513.75 30825.00

18.8.3 25mm nominal outer dia pipes M 267 626.05 166998.84

18.8.4 32mm nominal outer dia pipes M 0 712.75 0.00

22 18.9 Providing and fixing Chlorinated

External Chloride (CPVC) pipes,

18.9.5 40mm nominal outer dia pipes M 167 559.20 93162.72

18.9.6 50mm nominal outer dia pipes M 0 811.85 0.00

18.9.7 62.5mm nominal outer dia pipes M 0

18.9.8 75mm nominal outer dia pipes M 0

23 18.17 Providing and fixing gun metal gate valve

18.17.1 withmm

Wheel of approved

nominal bore quality Each 0 532.25

Sl. No. DSR No. Description of Item Unit Balance work DSR Rate DSR Amount Non-DSR/ Non-DSR/

Qty Market rate Market rate

18.17.2 32 mm dia. nominal bore Each 0 589.90

18.17.3 40 mm dia. nominal bore Each 14 707.30 9902.20

18.17.4 50 mm dia. nominal bore Each 0 878.25

18.17.5 65 mm dia. nominal bore Each 0 1490.70

18.17.6 80 mm dia. nominal bore Each 0 2227.60

24 18.18 Providing and fixing ball valve

18.18.3 25(brass) of approved

mm nominal bore quality, High Each 34 399.15 13571.10

25 18.19 Providing and fixing gun metal non-

18.19.4 32return

mmvalve of approved

nominal bore quality

18.19.4.2 Vertical Each 0 1320.80

26 18.21 Providing and fixing unplasticised PVC

18.21.1 30connection

cm length pipe with brass unions.

18.21.1.1 15 mm nominal bore Each 58 74.80 4338.40

27 18.22 Providing and fixing C.P. brass shower

28 18.48 Providing and placing on terrace (at all Litre 15000 9.70 145500.00

29 2.10 floor levels)trenches

Excavating polyethylene water storage

of required width for

2.10.1 pipes, cables, etc

All kinds of soil including

2.10.1.2 Pipes, cables etc. exceeding 80 mm dia. M 1191 417.35 497063.85

30 19.4 but not exceeding

Providing 300square-mouth

and fixing mm dia. S.W.

19.4.1 gullyXtrap

100 100grade 'A' complete

mm size P type with C.I.

19.4.1.2 With Sewer bricks conforming to IS : Each 16 2407.65 38522.40

Constructing brick masonry manhole

19.7.1 in cement

size 90 X 80 1:4 (1 cement

19.7.1.2 including

With SewerC.I. coverconforming

bricks with frameto(light

19.7.3 4885 size 120 X 90 cm and 90 cm

19.7.3.2 deep Sewer

With including C.I.

bricks cover with

conforming toframe

Extra for depth of manholes

19.8.1 Size 90x80cm

19.8.1.2 With Sewer bricks conforming to IS : Meter 112 7777.70 867991.32

19.8.2.2 With Sewer bricks conforming to IS : Meter 0

33 19.27 Constructing brick masonry road gully

19.27.1 With 50 bricks

F.P.S. X 45 X 60 cm with bricks of Each 180 5589.45 1006101.00

34 19.32 Making soak pit 2.5 m diameter 3.0 m

common cm clay

burnt dry brick honey

F.P.S. (non Each 0

35 12.41 modular)

Providing bricks of class

and Fixing on designation

12.41.2 110 mm diameterRigid PVC rain water Metre 475 319.75 151721.38

36 12.42 Providing and Fixing on wall face

unplasticised PVC moulded fittings/

12.42.1 Coupler

12.42.6 Shoe (Plain)

37 12.43 Providing and fixing unplasticised

110mm pipe clips of approved design to Each 139 309.50 43020.50

38 12.44 Providing and fixing to the inlet mouth of Each 54 47.90 2586.60

39 19.6 rain water pipe

Providing and cast ironnon-pressure

laying grating 15 cm

pipeR.C.C. pipes meter 4 81115.00 304181.25

40 MR Providing & fixing C.P. brass shower Each 26 5056.18 131460.68

41 MR assembly consisting

For feeding of wall mixer

Domestic/Flushing water to

(a) entire Project.

Capacity Variable

1 LPS Speed-Location

RPM 3000 / 0.5HP

Sl. No. DSR No. Description of Item Unit Balance work DSR Rate DSR Amount Non-DSR/ Non-DSR/

Qty Market rate Market rate

(b) Capacity 2 LPS each minimum

(c ) Capacity 5 LPS each minimum

No. of pumps 1 nos. 0

42 MR Providing and fixing Float Glass Mirror sqm 0

43 MR of minimum

Providing 6mm thickness,

& fixing Hand Shower of required

supply dia,fixtures

sanitary 1M longas PVC

44.0 N.S. Providing sanitary sealing on top as per Each 0 6323.77

Supplying, PCC BlockTesting,

Installation, of size 1m x

a). N.S. commissioning

Total head - 50 and lowering of

Flow rate - 8000 ltr/ hr.(Minimum)-5 Each 0 70869.39

46.00 N.S. hp motor

Supply & (appx.)

Installation of G.I Class `C'

a). N.S. column pipe with flanges at 6m intervals

50 mm dia Meter 0 981.24

47 N.S Supply, erection, installation in line and

pipeline drainage system Meter 700 1102.65 771855.00

(b) 250 mm O.D. pipeline Meter 491 1761.09 864695.19

48 MR Supply Installation, Testing and

(a) Commisioing

Grab Bar 600mm of (Mirror

Handicap finishToilet

stainless Each 1 7677.11 7677.11

Support 1.5mmUthickness

600mm type mirror Each 1 15145.69 15145.69

grab bar 600steel, 32 mm

x 600 mm dia and 1.5

49 12.7 finish stainless

Providing steel 32

and fixing 15mm dia 1.5mm

cm wide, 45 cm

12.7.1 overall

0.80 mm thick with zinc coatingsheet

semi-circular plain G.S. not less thanMeter

ELECTRICAL, IT, EPABX, HVAC & FIRE FIGHTING

1 Point Wiring

1.01 1.100 Wiring for light point/ fan point/ exhaust

1.10.3 fan point/

Group C call bell point with 1.5 sq.mm Point 577.00 990.00 571230.00

1.02 1.120 Wiring for light/ power plug with 2X4 sq. mmMetre 8264.00copper conductor

FR PVC insulated 200.00single core

cable in surface/ recessed medium class PVC conduit alongwith 1 N

1.03 1.130 Wiring for light/ power plug with 4X4 sq. mmMetre 0.00 copper conductor single core cable

FR PVC insulated 0.00

in surface/ recessed medium class PVC conduit alongwith 2 N

1.04 1.240 Supplying and fixing following modular

1.24.1 switch/

5/6 ampssocket on the existing modular

1.24.4 3 pin 5/6 amp socket outlet Each 309.00 111.00 34299.00

1.24.5 6 pin 15/16 amp socket outlet Each 96.00 175.00 16800.00

1.05 1.250 Supplying and fixing two module stepped typeEach 93.00

electronic fan 342.00 modular31806.00

regulator on the existing plate switch box including connections but excluding modular plate

Supplying and fixing modular blanking plate on 103.00

the existing 32.00box excluding

modular plate & switch 3296.00

modular plate as required.

1.07 1.270 Supplying and fixing following

1.27.1 1size/module,

or 2 ModuleGI box along with Modular Each 152.00 243.00 36936.00

2 Submain and Control Wiring

2.01 1.1 Wiring for circuit/ submain wiring

1.14.1 alongwith

2 x 1.5 sq. earth

1.5 sq. following

earth wire Metre 0.00 146.00 0.00

Sl. No. DSR No. Description of Item Unit Balance work DSR Rate DSR Amount Non-DSR/ Non-DSR/

Qty Market rate Market rate

1.14.3 2 x 4 sq. mm + 1 x 4 sq. mm earth wire Metre 0.00 0.00

1.14.4 2 x 6 sq. mm + 1 x 6 sq. mm earth wire Metre 0.00 0.00

1.14.5 2 x 10 sq. mm + 1 x 6 sq. mm earth wire Metre 0.00 0.00

1.14.6 2 x 16 sq. mm + 1 x 6 sq. mm earth wire Metre 0.00 0.00

Extra 1.14.10 4 X 10 sq. mm + 2 X 6 sq. mm earth wire Metre 0.00 0.00

Extra 1.14.11 4 X 16 sq. mm + 2 X 6 sq. mm earth wire Metre 430.00 752.00 323360.00

Supplying and fixing of following sizes of medium class PVC 0.00

conduit along with accessories in surface/recess including painting in case of surface conduit, or cutti

3.01 7.1 Laying of one number PVC insulated and

7.1.1 PVC sheathed

Upto 35 sq mm/ XLPE power cable of Metre 3210.00 323.00 1036830.00

7.1.2 Above 35 sq mm and upto 95 sq mm Metre 0.00 338.00 0.00

7.1.3 Above 95 sq mm and upto 185 sq mm Metre 250.00 352.00 88000.00

7.1.4 Above 185 sq mm and upto 400 sq mm Metre 1110.00 396.00 439560.00

3.02 9.1 Supplying and making end termination

9.1.31 withXbrass

3½ compression

400 sq. mm (82mm)gland and Each 4.00

3.03 8.100 0.00 power cable of 11kV grade of following size direct in ground including excavation , sand cushionin

Laying of one number PVC insulated and PVC sheathed/ XLPE

8.5.2 Above 120 sq. mm and upto 400 sq mm Metre 30.00

Supplying and fixing single pole blanking plate 58.00

in the existing 8.00

MCB DB complete 464.00

etc. as required.

4.02 2.10 Supplying and fixing 5 amps to 32 amps

2.10.1 rating, pole

Single 240/415 volts, "C" curve, Each 214.00 199.00 42586.00

2.13 Supplying and fixing following rating,

2.13.1 fouramps

40 pole, 415 volts, isolator in the Each 0.00

4.03 2.5 Supplying and fixing following way,

2.5.2 8vertical

way (4type three

+ 24), pole and

Double doorneutral, sheet Each 0.00

Extra 2.2 Providing and fixing following rating and

breaking capacity and

4.04 2.1 Supplying and fixing following rating,

25 ampspole, (single phase and neutral), Each 0.00 1927.00 0.00

Sl. No. DSR No. Description of Item Unit Balance work DSR Rate DSR Amount Non-DSR/ Non-DSR/

Qty Market rate Market rate

5 PROVISIONS FOR VOICE, DATA, SECURITY & TV SYSTEMS

5.01 1.24 Supplying and fixing following modular

1.24.6 switch / socket

Telephone on outlet

socket the existing modular Set 73.00 119.00 8687.00

1.24.7 TV socket outlet Set 38.00 119.00 4522.00

5.02 1.18.2 Supplying and drawing following pair,

0.5 sq.mm FR PVC insulated copper

6 LIGHTING FIXTURES & FITTINGS

6.01 1.41 Each fluorescent

Installation, testing and commissioning of pre-wired, 444.00fitting / compact

168.00fluorescent 74592.00

fitting of all types, with all accessories and tube etc. directly on ceiling

6.02 1.45 Nos.fan including

Installation, testing and commissioning of ceiling 93.00wiring the down

rods of standard lenght (upto 30 cm) with 1.5 sq. mm FR PVC insulated, copper co

6.03 1.50.1 Nos. including32.00

Installation of exhaust fan in the existing opening, making good the 363.00 11616.00

damage, connection, testing, commissioning etc. as required.

Upto 450 mm sweep

6.04 1.51 Extra for fixing the louvers/ shutters completeNos. 32.00

with frame for exhaust fan of all168.00

sizes. 5376.00

Earthing with G.I. earth plate 600 mm X 600 mm 6216.00 and providing

thick including accessories, 180264.00masonry enclosure with cover plate having locking arrangem

7.02 5.6 Earthing with Copper earth plate 600 mm X 600Setmm X 3 mm 0.00thick including accessories, and providing masonry enclosure with cover plate having locking arrang

7.03 5.9 Supplying and laying 25 mm X 5 mm G.I strip Metre 104.00

at 0.50 metre below ground as131.00 13624.00

strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, wa

7.04 5.14 Providing and fixing 25 mm X 5 mm CopperMetre 0.00

strip on surface or in recess for connections etc. as required.

7.05 5.15 Providing and fixing 25 mm X 5 mm G.I. stripMetre

on surface 104.00 206.00 etc. as required.

or in recess for connections 21424.00

7.06 5.18 Providing and fixing 6 SWG dia G.I. wire onMetre

surface or in520.00 37.00

recess for loop earthing along with 19240.00

existing surface/ recessed conduit/ submain wiring/ cable as required

7.07 5.7 Supplying and laying 6 SWG G.I. wire at 0.50Metre

metre below52.00 44.00 earth electrode,

ground level for conductor 2288.00including connection/ termination with GI thimble etc. as re

9 Substation Equipments

9.04 10.5 11 KV CABLE JOINTING:

Supplying and making outdoor cable end terminations with heat shrinkable cable jointing kit complete with all accessories including lugs suitable for following size

10 SAFETY ITEMS

10.07 2.21 Providing and fixing MV danger notice plate ofnos. 0.00 made of mild

steel, atleast 2 mm0.00

thick, and vitreos enamelled white on both sides and with iscrip

10.08 2.22 Providing and fixing HT danger notice plate ofnos. 0.00 made of mild

steel, atleast 2 mm 0.00

thick, and vitreos enamelled white on both sides and with iscrip

11.01 6.2 Each made of12.50

Providing and fixing of lightening conductor finial, 25 mm dia 300 mm 448.00

long, G.I. tube,5600.00

having single prong at top, with 85 mm dia 6 mm thick copper bas

11.02 6.3 Each with base

Fixing of lightening conductor finial (single prong), 12.50 280.00

plate including holes etc. complete3500.00

Jointing copper/ G.I. tape (with another copper/ 25.00

G I tape, base 93.00

of the finial or any other mettallic2325.00

object) by rivetting/ nut bolting/ sweating and soldering etc. as requ

11.04 6.7 Providing and fixing G.I. tape 20 mm X 3 mm Metre 187.50or surface of wall

thick on parapet 104.00

for lightning19500.00

conductor complete as required. (For horizontal run)

11.05 6.8 Providing and fixing G.I. tape 20 mm X 3 mm Metre 75.00or surface of wall

thick on parapet 163.00

for lightning12225.00

conductor complete as required. (For vertical run)

11.06 6.12 Providing and fixing testing joint, made of 20Each

thick G.I. strip, 125 mm long, with 2550.00

4 nos. of G.I. bolts, nuts, chuck nuts and spring washers etc. comple

11.07 6.14 Providing and laying G.I. tape 32 mm X 6 mm Metre

from earth 125.00

electrode directly in176.00 22000.00

ground as required.

4.1 Supplying and installing following size of

4.1.2 perforated

mm width X 50with

mmpowder coating

3.04 MR Supply of following XPLE armourned

Supply grade conforming

following to PVC

3.5c x 400PVC/XLPE

sqm XLPEinsulated

Extra (b) 3.5c x 300 sqm XLPE cable RM 0.00 1300.34 0.00

Extra (c ) 3.5c x 240 sqm XLPE cable RM 760.00 1061.02 806375.20

(d) 3.5 C x 185 Sqmm XLPE cable RM 0.00 1348.70 0.00

(f) 3.5 C x 95 Sqmm XLPE cable RM 0.00 731.59 0.00

(g) 3.5 C x 70 Sqmm XLPE cable RM 0.00 588.76 0.00

(h) 3.5 C x 50 Sqmm XLPE cable RM 0.00 433.95 0.00

Sl. No. DSR No. Description of Item Unit Balance work DSR Rate DSR Amount Non-DSR/ Non-DSR/

Qty Market rate Market rate

(i) 3.5 C x 35 Sqmm XLPE cable RM 0.00 336.91 0.00

(l) 4c x 10 sqm XLPE cable RM 25.00 195.16 4879.00

6 LIGHTING FIXTURES & FITTINGS

6.05 MR Supply of ISI marked energy efficient exhaustEach 32.00

fan plastic ideal for mounting on glass window with 200mm sweep 1471.91

(Havells Cat No.47101.12

Ventilair DX 200mm sweep or

6.06 MR Supply of LED Tubelight batten including lamp Eachfitting and411.00

all accessories as required. (Philips Cat no. - 31082 1158.99

slimline 18 watt LED476344.89

wall lamp or Equivalent)

6.07 MR Supply of ISI marked energy efficient BEE FIVE STAR rated 0.00sweep ceiling fan with double ball bearing, motor, blades, down rod, canopies, capacitor etc. suitable

6.08 MR Supply, Installation, Testing and CommissioningEachof Hot dip50.00 12538.52

Galvanized octagonal pole with integral cotrol box, 626926.00 arrangement with top b

MCB and cable termination

6.09 MR Supply, installation, testing and commissioningEach 50.00

of high performance 8362.64 all duly418132.00

72W LED street light 7200 lumens, with connectors wired , connection & wiring from

6.1 MR Supply of LED concealed lighting suitable forEach 0.00 grid including lamp fitting and all accessories as

2x2 false ceiling 6487.31 0.00- Cirrus RC365B LED 3

required. (Philips Cat no.

6.11 MR Supply of 1 x 12watt LED wall mounted lightEach 27.00light complete with lamp and all accessories as1630.00

fixture for mirror required. (Philips 44010.00

Cat No - Hexa LED 30965 or Eq

6.12 MR Eachand all accessories

Supply of 60W wall light/bracket light with lamp 0.00 3161.88

as required. (Philips Cat No 36677 - My Living 0.00

Wall Light or Equivalent)

6.13 MR Surface 1 x 15watt LED mounted downlighterEach fitting and all6.00

accessories as required. (Philips Cat no. - DN170C2126.10

6.14 MR Supply, Installation, Testing and Commisioning Eachof Wall fan0.00

of size 400mm with minimum RPM of 1360 or above 2729.04 0.00 complete in all respec

with wiring and controls,

Extra MR Supply of Double LED Tubelight batten includingEach lamp fitting

0.00and all accessories as required. (2x18 watt LED 1232.82

wall lamp or Equivalent)0.00

Extra MR Supply of 12watt LED foot light fitting and allEach

accessories as0.00

required. 968.64 0.00

Extra MR SITC of AC Starter Each 8.00 792.53 6340.24

Supp MR Each of 8 W 13.00

Supplying, Installation, Testing and Commisioning LED BOLLARD Housing made up of aluminum pipe 4935.10 64156.30

powder coated black after phosphochromate treat

Supp MR Supply, Installation, Testing and Commisioning Each 10.00

of 24 W Standalone 68078.59

Solar LED Street lighting Blue tooth operated 680785.90

system including hybrid charging device comple

H PANEL BOARDS

H.1 MR MAIN LT PANEL

Designing, fabricating, transporting,

unloading, storing, fixing

Type of construction: Formin 3position,

IP classification: 42

All MCCBs in Main LT Panel shall have

The LT PANEL50 kAshall

breaking capacity inter-

be electrically

Colour: shown in Schematic

Powder Coated, asdiagram

approved sample.

3 nos, 800 Amps. 4 pole ACB and 1

a) Amps 4 pole

Independent MCCB,

manual springi.eclosing

b) Microprocessor No. release (EMI & EMC

Digital type current, earth

Voltmeter, withfault &

Digital & back

Ammeter, with selector

e) Nos.one set of

Phase 3 nos. CT’s

indication LEDoflamps

f) each incoming

Shunt trip coilwith

1 No.-1000 Amps horizontal four pole

a) type and 1manual

Independent No. 800spring

b) Breaker No.

‘ON’ indicating light with

back up 2 A HRC fuse test terminal

TPN aluminum bus bars of minimum of

1600 Amps capacity with heat shrinkable

Electrical through advance contacts in

ACB's/MCCB’s (Incomers & Bus

(a) 630 Amps TPN MCCB (ICS =

4 Nos.TPN MCCB (ICS=36 kA)

(c) Nos.Amps TPN MCCB (ICS=25 kA)

Nos.Amps TPN MCCB (ICS=25 kA)

Nos.Amps TPN MCCB (ICS=25 kA)

(f) Nos.Amps TPN MCCB (ICS=25 kA) -

63 Amps, TPN, MCB -8 Nos.

CAPACITOR PANEL (320 KVAR): -

Supply, install, test and commissioning of

completecapacitor

as abovepanel 320

with capacitor each 0.00 2750130.90 0.00

Sl. No. DSR No. Description of Item Unit Balance work DSR Rate DSR Amount Non-DSR/ Non-DSR/

Qty Market rate Market rate

(1) SITC of PLC for auto selection of DG setseach

depending on0.00 614016.34

the load and auto switching of bus couplers for safety 0.00 (2) SITC of 180 KVAR

and error free operation.

Additional Capacitor Bank of 180 KVAR

H.2 MR METER PANEL

Design, fabrication, assembling, wiring,

supply, installation,

arrangement testing

for sealing theand

doors, re-inforcement

Approval of suitable

shall be obtained from size

The metering Electricity Board

panel shall for thethe

Trivector Meter of Secure make,

3 nos castclass

CT's of 5/1 amps CT

phaseburden andtransformer

potential accuracy class

approved make by Electricity Board

VA Burden 100VA

The metering panel shall be complete Set 0.00 287370.00 0.00

with all interconnections etc. as above

H.3 MR Sub Main Panel for Academic Block

Designing, fabricating, transporting,

Type storing, fixing

of construction: Formin 3position,

IP classification: 42

The LT PANEL shall be electrically inter-

Colour: shown in Schematic

Powder diagram

Incomings: sample.

1 nos, 630 Amps. 4 pole MCCB , i.e

a) Moulded manual

Independent Case Circuit

Microprocessor release (EMI &

c) for Voltmeter,

Digital type over current, earth

Digital & back

Ammeter, with selector

Nos.one set of

Phase 3 nos. CT’s

indication LEDoflamps

trip coil 2202 V

TPN aluminum bus bars of minimum of

800 Amps capacity with heat shrinkable

(a) 200 Amps TPN MCCB - 2 Nos.

(b) 160 Amps TPN MCCB - 2 Nos.

(c) 100 Amps TPN MCCB - 6 Nos.

(d) 63 Amps, TPN, MCB -12 Nos.

MR Panel complete as above each 0.00 257509.06 0.00

H.4 MR Sub Main Panel for Guest House

Designing, fabricating, transporting,

unloading, storing, fixing

Type of construction: Formin 3position,

IP classification: 42

The LT PANEL shall be electrically inter-

shown in Schematic

Powder Coated, asdiagram

approved sample.

1 nos, 400 Amps. 4 pole MCCB , i.e

a) pole Moulded manual

Independent Case Circuit

Microprocessor release (EMI &

c) for Voltmeter,

Digital type over current, earth

Digital & back

Ammeter, with selector

e) Nos.one set of

Phase 3 nos. CT’s

indication LEDoflamps

f) each incoming

trip coil 2202 V

TPN aluminum bus bars of minimum of

630 Amps capacity with heat shrinkable

(a) 160 Amps TPN MCCB - 2 Nos.

(b) 100 Amps TPN MCCB - 4 Nos.

(c) 63 Amps, TPN, MCB -6 Nos.

Sl. No. DSR No. Description of Item Unit Balance work DSR Rate DSR Amount Non-DSR/ Non-DSR/

Qty Market rate Market rate

MR Panel complete as above each 0.00 200009.52 0.00

H.5 MR Sub Main Panel for Boys Hostel/ Admin

Designing, fabricating, transporting,

Type storing, fixing

of construction: Formin 3position,

IP classification: 42

The LT PANEL shall be electrically inter-

Colour: shown in Schematic

Powder diagram

Incomings: sample.

1 nos, 250 Amps. 4 pole MCCB , i.e

Bus pole Moulded Case Circuit Breaker

TPN aluminum bus bars of minimum of

320 Amps capacity with heat shrinkable

(a) 100 Amps, TPN, MCCB -2 Nos.

(b) 63 Amps, TPN, MCB -12 Nos.

MR Panel complete as above each 1.00 127502.88 127502.88

H.6 MR Sub Main Panel for Girls Hostel/ Canteen

Designing, fabricating, transporting,

unloading, storing, fixing

Type of construction: Formin 3position,

IP classification: 42

The LT PANEL shall be electrically inter-

shown in Schematic

Powder Coated, asdiagram

approved sample.

1 nos, 200 Amps. 4 pole MCCB , i.e

four pole Moulded Case Circuit Breaker

TPN aluminum bus bars of minimum of

400 Amps capacity with heat shrinkable

(a) 63 Amps, TPN, MCB -8 Nos.

MR Panel complete as above each 0.00 83337.30 0.00

H.7 MR Sub Main Panel for Amenities

Designing, fabricating, transporting,

unloading, storing, fixing

Type of construction: Formin 3position,

IP classification: 42

The LT PANEL shall be electrically inter-

shown in Schematic

Powder Coated, asdiagram

approved sample.

1 nos, 160 Amps. 4 pole MCCB , i.e

four pole Moulded Case Circuit Breaker

TPN aluminum bus bars of minimum of

200 Amps capacity with heat shrinkable

(b) 63 Amps, TPN, MCB -4 Nos.

Panel complete as above each 0.00 61669.60 0.00

H.8 Plumbing Panel

Supplying, installation, testing and

commissioning of cubical

Incomer: 1nos 160A TPN type

1 no 96mm x 96mm digital Voltmeter

1 setAmmeter with LCD

of three phase display

indicating for with

Busbar: protection.

Equally sized three phase and

neutral copper bus bars suitably sized to

6nos 63A TPN MCBs

2nos 25A TPN MCBs

6nos 16A TPN MCBs

MR Panel complete as above each 0.00 90004.28 0.00

H.9 External lighting panel

Supplying, installation, testing and

commissioning of cubical type outdoor

Sl. No. DSR No. Description of Item Unit Balance work DSR Rate DSR Amount Non-DSR/ Non-DSR/

Qty Market rate Market rate

Incomer:1nos 63A TPN MCCB

1 no 96mm x 96mm digital Voltmeter

1 setAmmeter with LCD

of three phase display

indicating for with

suitable protection.

Busbar: Equally sized three phase and

neutral copper bus bars suitably sized to

5nos 32A TPN MCBs

Panel complete as above each 1.00 49586.01 49586.01

H.10 Supply, Installation, Testing and

(a) Commisioning

Suitable for set of

of Cubical type

2 quarters Main meter nos 1.00 38335.16 38335.16

Suitable as 2above

for set of quarters Main meter nos 0.00 38335.16 0.00

board complete as above

9 Substation Equipments

9.01 MR TRANSFORMER:

Supply, Installation, testing and commissioning, of 800kVA,0.00

11kV/433V 3 Phase , oil type transformer, 50 Hz Delta Star Connected, winding temp indicator, contr

9.02 MR 11kV HT VCB PANEL BOARD:

Supply, Installation, Testing and

Commisioning of High Voltage

Complete as above nos. 0.00

COMPACT SUBSTATION

Extra MR 0.00of 500 KVA CRT dry type distribution transformer of same make, complying to standard losses, cla

Supply & Installation of 11kV Compact Substation comprising

9.03 MR HT XLPE Cable 11 KV:

Supplying, laying, testing & commissioning cable XLPE insulated screened PVC bedded, galvanized steel strip or wire armored with aluminum conductor 11 KV g

3 C x 300 sq mm meter 0.00

Supply, Installation, Testing, Commisioning (SITC) KVA of D.G. Set, complete with engine, alternator, base frame, radiator/heat exchanger, fuel tank, contr

Extra MR nos. of 380 0.00

Supply, Installation, Testing, Commisioning (SITC) KVA of D.G. Set, complete with engine, alternator, base frame, radiator/heat exchanger, fuel tank, contr

Extra MR nos. of 200 0.00

Supply, Installation, Testing, Commisioning (SITC) KVA of D.G. Set, complete with engine, alternator, base frame, radiator/heat exchanger, fuel tank, contr

10 SAFETY ITEMS

10.01 MR Providing of Rubber mat 1 metre wide and 6mm mtrsthick to with stand 3.3KV dielectric strength Latest as per IS 15652.

10.02 MR Providing of Rubber mat 1 metre wide and 12mm mtrs thick to withstand 15KV dielectric strength Latest as per IS 3944.72

10.03 MR nos painted in post office red colour with prior coat of red-oxide

Providing of Set of 4 Nos. 9 Litre capacity GI bucket 4470.25

paint and written with0.00

white paint 'FIRE' and mou

10.04 MR Supplying and fixing of Carbon dioxide

9 KG type fire extinguishers of 4.5 Kg nos 15148.69 0.00

10.05 MR Providing of First Aid Box as approved by St. nos 1446.83

John Ambulance Brigade/Indian Red Cross conforming to IS 2217-1963. 0.00

10.06 MR Supply and fixing of Foam fire extinguishers, Nos.

portable 9 litre capacity hanged on wall with bracket complete as3438.82

required. 0.00

Extra MR AIR CONDITIONING WORKS

1.1 Nos of BEE 0.00

Supplying, Installation, Testing and Commisioning 57474.00

certified 2 TR (Carrier, O-Genral & Diakin) split type 0.00

air condition unit each comprising of an outdoor

1.2 Nos of BEE 0.00

Supplying, Installation, Testing and Commisioning certified 1.5 TR (Carrier, O-Genral & Diakin) split47895.00 0.00comprising of an outdoo

type air condition unit each

1.3 Nos of BEE 0.00

Supplying, Installation, Testing and Commisioning certified 1.0 TR (Carrier, O-Genral & Diakin) split38316.00 0.00comprising of an outdoo

type air condition unit each

1.4 Supply, Installation, testing and commisioningRM 50.00

of copper refrigerant piping complete with elbow band complete 1582.45

fittings size 1/4 79122.50

and 1/2 with 9mm insulation com

1.5 RMT supports50.00

SITC of Rigid PVC Piping complete with fittings, 270.77 of closed13538.50

as per specifications and duly insulated with 6mm thickness cell nitrile rubber.

1.6 MS epoxy coated stand for ODU for Split Units Nos 0.00 2788.13 0.00

1.7 High Wall and Ducted Units 2X2.5sq.mm Copper Rmt Cable 50.00 133.34 6667.00

1.8 High Wall and Ducted Units 4X2.5sq.mm Copper Rmt Cable 50.00 214.83 10741.50

1.9 Supply of AC Stablizers 0 8382.26 0.00

BOQ OF IT WORKS

1.0 Supplying and drawing of UTP 4 pair CAT 6 Mtrs.

LAN cable in the existing surface/49.00 49.00

recessed steel/ PVC conduit as required

1 Supplying and drawing of UTP 4 pair Mtrs. 3600.00 91.96 331056.00

2.0 CAT 6A LAN

Supplying, cabletesting

installing, in theand

existing Nosof Cat 6 , Tool less Information outlet for Data,Voice & Wi-Fi. 402.32

commissioning 0.00

Cat6 U/UTP built in crimping hands-free, minimu

2 Supplying,installation, testing and Nos 60.00 917.99 55079.40

3.0 commissioning of Cat

Supplying, installing, 6A key

testing and stone Nosof following length of Cat - 6 patch cord. 4 Feet : CAT6 UTP 23

commissioning 268.21

AWG Patch Cord - 10.00

mtr - Rack End. Factory cri

3 Supplying, installing, testing and Nos 60.00 998.77 59926.20

commissioning of following length of Cat

Sl. No. DSR No. Description of Item Unit Balance work DSR Rate DSR Amount Non-DSR/ Non-DSR/

Qty Market rate Market rate

4.0 Nosof following length of Cat - 6 patch cord. 7 Feet : CAT6 UTP 23

Supplying, installing, testing and commissioning 293.76

AWG Patch Cord - 20.00

mtr - User End.Factory crim

4 Supplying, installing, testing and Nos 60.00 1116.27 66976.20

5.0 commissioning

Supplying, of following

installing, testing length of Cat Nosof 24 port Cat 6 patch panels available with block of four equipped

and commissioning 9725.88 0.00 Mountable. 19" Modul

with tool less IO, Rack

5 Supplying, installing, testing and Nos 23206.72 0.00

6.0 commissioning of 24 following

Supplying and fixing port Cat 6A patch base &

cover plate on existing modular metal boxes etc. as required. 10.22 0.00

6 2-port British-style shuttered faceplate for Nos 60.00 179.19 10751.40

BACKBONE CABLING

1.0 Supplying, laying and fixing of 6 core outdoorMtr. 134.11

Singlemode Optical Fiber of size Outdoor Universal loose tube PVC 0.00GI/HDPE/ Hume pipe o

jacket through existing

new Supplying, laying and fixing of 6 core Mtr. 129.25 0.00

new outdoor Multimodeemode

Supplying, laying and fixingOptical Fiber

of 24 core Mtr. 188.00 0.00

2.0 outdoor Singlemodeemode

Supplying, installing, testingOptical Fiber Nosof 6 port LCS2 Adapter plate, loaded with 6 nos. of duplex LC9706.72

and commissioning 0.00 of size 50/125 μm .Ad

unit for 6 multi mode fibers

3.0 Nosof LIU 24 port LC type LCS2. Rack Mount 19" modular type19924.32

Supplying, installing, testing and commissioning 0.00for 4nos of 6 X RJ 45 UT

unloaded to be compatible

4.0 Nosof 10 GB -50/125μm OM3 SC Pigtails MM 50/125mn. Approved

Supplying, installing, testing and commissioning 574.74 0.00

Makes :- Legrand/Panduit/Siemon

5.0 Nosof SM Patch Cord - SC/LC

Supplying, installing, testing and commissioning Duplex Cords - 2 mtrs. 4214.76

Approved Makes :-0.00

Legrand/Panduit/Siemon

new Supplying, installing, testing and Nos 1404.92 0.00

6.0 commissioning of MMtesting

Supplying, installing, Patchand

Cord - Nosof Blanking plate for LIU and Modular Patch Panel (Size 6 X RJ45

commissioning 574.74 0.00

Blanking plate). For 19" Panel - Black in colou

RACK & ACCESSORIES

1.0 Nosof 15U Wall-mounting cabinets. size 771.35X600X500mm (HXWXD))

Supplying, installing, testing and commissioning 12069.54 with all standard

0.00accessories. Width (mm

2.0 Nosof Cabinet. Size 2026 X 800 X 800 mm (HXWXD) following

Supplying, installing, testing and commissioning 90425.76 0.00

accessories, Width (mm) 800, Depth (mm) 800, Ap

3.0 Supply, Installation, testing and commissioningNos

of 1 U Horizontal Wire Manager 60mm depth (Front Side) 830.18 0.00

Active Components

1.0 Supply, Installation, Testing & CommissioningNos 700799.64

of Core Switch 20 10 GbE SFP+ ports and 4 10GBASE-T/SFP+ 0.00

combo ports, one AC modular power supply, and th

2.0 Supply, Installation, Testing & CommissioningNos 137937.60

of 24 POE 10/100/1000 ports+4 Gigabit SFP ports Switch Flow 0.00 CoS based on 802.1

Control; LLDP, LLDP-MED;

new Supply, Installation, Testing & Nos 59389.80 0.00

new 8Commissioning

Port POE switchof 24 Port Non POE Nos 25288.56 0.00

3.0 Supply, Installation, Testing & CommissioningNos 33845.80

of Modules 1GBASE- SX SFP, SF 220 & 550 meters, LC connector, Industrial Temp. 0.00

3 Supply, Installation, Testing & 13879.97 0.00

4.0 Commissioning

Supply of Modules

, Installation , Testing1GBASE- Nos

and Comissioning 44063.40

of 3x3 Mimo 1750 mbps to should work to Hardware controller. 0.00

5.0 Supply , Installation , Testing and comissioningNos 402318.00 mode. scalable upto

of wilreless LAN ontroller supportable for 100 Aps in high availability 0.00 250 AP.this controller s

Wiring, switch socket, junction box in

new floor (Boys and Girls)= 64 Nos,

Wiring forBldg ( Smart

light/ powerclassroom-

new 2X4 sq. mm

Supplying andFR PVCfollowing

fixing insulated copper

5/6 amps switch/

switch socket on the existing Nos 64 107.28 6865.92

new 3 pin 5/6 amp socket outlet Nos 64 103.45 6620.80

new Supplying and fixing following

new 6size/module,

Module GI box along with Nos 64 329.52 21089.28

new Supply of 6896 13 (400x400x65-90mm) Nos 7094.21 0.00

new Installation of above Raceway junction Nos 1902.07 0.00

Suppply of MS BOX Local MS Box Nos 425.95 0.00

new Installation of MS Box with wall cutting Nos 734.39 0.00

BOQ OF EPABX WORKS

1.0 Supply, Installation, Testing & CommissioningNo. 0.00 Module as per given Specification etc. all complete.

of 10 Pair Krone 925.97 0.00

2.0 Supply, Installation, Testing & CommissioningNo. 0.00 Box with Mounting Frame as per given Specification

of 200 Pair MDF 40295.66etc. all complete.0.00

3.0 Supply, Installation, Testing & CommissioningMtr. 0.00

of 25 Pair Armoured 402.32

Riser cable as per given Specification etc. all complete. 0.00

4.0 Supplying and drawing of UTP 4 pair CAT 6 LANNo. cable in 0.00

the existing surface/49.00 49.00

recessed steel/ PVC conduit as required

5.0 Supply, Installation, Testing & CommissioningNo.

Blocking Fully Digital Integrated Services Digital 0.00 Voice Over Internet T

Network(ISDN) Compatible

6.0 Supply, Installation, Testing & CommissioningNo. 0.00

of 16 Port Analouge Card etc. all complete. 30882.70 0.00

7.0 Supply, Installation, Testing & CommissioningNo.

of High End0.00 32875.13

Digital Key Phone 6x24 Display with 24 Programmable Dual Color LED’s0.00

with 4 Feature Access Key

8.0 Supplying and fixing of following sizes 0.00

of medium class PVC conduit along with

Sl. No. DSR No. Description of Item Unit Balance work DSR Rate DSR Amount Non-DSR/ Non-DSR/

Qty Market rate Market rate

Extra MR 200A 415V TPN DB MCCB incomer

8 way (4 + 24), Double door Each 0.00 14090.71 0.00

Extra Supplying and fixing following

40 amps pole, three phase and neutral), Each 0.00

63 amps Each 0.00

Extra 2.2 Providing and fixing following rating and

MR breaking capacityMCCB

MR 160 A, kA TPN MCCB Each 0.00 11308.47 0.00

BOQ OF FIRE FIGHTING WORKS

SUPPLY OF MANUALLY

1.0 OPERATED ELECTRICAL

Supplying, installation, testing &FIRE Eachof addressable

commissioning 0 manual call point complete as required. 5724.69 0.00

Supplying, installation, testing & Each 0 5183.24 0.00

2.0 commissioning of addressable horn cum

SUPPLY OF HANDHELD

2a EXTINGUISHERS Noskg

CO2 GAS type handheld fire extinguishers - 4.5 50 10084.61 504230.50

2b Nos - 6kg 50

ABC - dry powder type handheld fire extinguishers- 5732.11 286605.50

CO2 cartridge triggered water type handheld extinguishers - 50

TERRACE LEVEL BOOSTER PUMP

3.0 Supplying, installation, testing and

3a commissioning

900 lpm at 35 mofHead

electric driven terrace Set 1 128928.23 128928.23

FIRE HYDRANT SYSTEM

Providing, laying, testing &

150mm dia of 'C' class heavy duty Mtr 40 3061.87 122474.80

2.0 Providing 63 mm dia GM single outlet flanged Nos inlet oblique

6 type fire hydrant landing valve with C.I. 8340.05

hand wheel, 50040.30

plunger type female instantan

3.0 Providing approved drum type wall Nos 5 12194.11 60970.55

Providingfirst aid hose2reels

in position (I.S.of8090

lengths 15 mtr long Nos

and 63mm dia,5 controlled, percolated RRL lined canvass hose 18691.69 93458.45

(Conforming to IS 903 - 1984) along with couplings,

5.0 Providing Fire Brigade inlet Siamese Nos 5 12897.27 64486.35

6.0 connection fabricated

Providing suitable fromDrain

G.M. 150mm valve of 25mmNos dia. and GI

5 drain pipe of required length including ball2038.28

valve, necessary10191.40

support and painting of two c

7.0 Providing in position cast iron butterfly

diapressure rating PN 16 Nos 2 7093.94 14187.88

8.0 Providing heavy approved quality cast

150 mm plate type non return valves Nos 3 14205.68 42617.04

10.0 Providing of pressure gauge, glycerine filled withNos guage cock, 4628.42

2 siphon and socket welded through pipes etc. complete 9256.84

11.0 Providing of 200 Lit diaphragm tank with pressure Nos switch etc,2 complete for auto operation of Hydrant and Sprinkler

pump including all necessary inlet

12.0 Providing of Fireman axe Nos 2 970.19 1940.38

Grand Total 66307598.66

Grand Total 66307598.66