Revamping of Lake View Hostel in FACT (Cochin Division) Township at Ambalamedu, Ernakulam.

Surface dressing of the ground including removing vegetation and in-equalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m. All kinds of soil

Dismantling and removing the MP tiles / PWD tiles over the roof including ridges, hips, valley sheets, wind tiles and board ridges but excluding roof timber and stacking materials as per deptl.instructions.

Dismantling and removing wrought and framed timber roof and floor and stacking materials as per deptl.instructions.

Labour charges for dismantling carefully the existing ceiling /partitions with AC sheets, Plywood / Hardboard /wood etc and stacking them as per deptl.instructions.

Chipping & removing mosaic flooring / skirting in the toilet rooms and other areas very carefully without damaging the remaining portions and water supply items and removing the debris to places pointed out by the department.

Chipping & removing old cement plastered surface including racking out joints & clearing the surface for replastering & disposal of the debris as per directions within a distance of 150 m.

Chipping & removing portions of existing RCC works carefully without damaging the remaining structure & removing the debris as per directions within a distance of 150 m.

Dismantling and clearing away any thickness of rubble, brick, laterite in CM including disposal of debris as per directions within a distance of 150 m.

Dismantling CC/RCC works including separately removing & stacking available reinforcement & clearing away the debris as per directions within a distance of 150 m.

Dismantling and removing doors with or without ventilators including removal of shutters, hinges, holdfast and all other fittings and stacking materials as per deptl.instructions

Dismantling and removing windows /ventilators/ shelves/ cup boards/AC frames etc including removal of shutters, hinges, holdfasts and all other fittings and stacking materials as per deptl.instructions

Taking down shutters of doors, windows and ventilators including removal of hinges and all other fittings and stacking as per deptl.instructions

Dismantling carefully the existing RCC jalley of size 500x250 mm without any damage and repair the same suitably using cement concrete/cement mortar and refixing the jally in position as per instructions

RCC work in 1:1½:3 nominal mix using 20 mm and downgrade hard granite broken stone including all charges for mixing concrete, laying, consolidating, curing etc.complete but excluding cost of form work & reinforcement works- For foundation footings, bottom & sides of trenches, equipment foundations, plinth beams, lintels, slabs, columns & beams etc.up to 15 m from ground level.

Providing steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete with Thermo-Mechanically Treated bars of grade Fe-500D (TMT bars) including cost of reinforcement steel)

Centering and shuttering including strutting, propping etc. and removal of form Lintels, beams, plinth beams, girders, bressumers and cantilevers

Supply, fabrication and fixing of steel structures made with M.S. hollow tubular sections as per IS4923 of different sections with insert plates,legs etc. and blinding the hollow tubes with MS plates etc. at all heights with necessary welding ,scaffoldiing and painting with two coats of zinc chromate yellow metal primer and two coats of synthetic enamel paint with all labour and material charges etc. complete

Supplying and providing Aluminium coloured roofing sheets "Tiled Profile" at all levels with minimum thickness of 0.5mm and minimum weight of 1.65 kg per square metre, with suitable anticorrossive corroshield selftapping scews, washers, overlaps of sheets with adequate sealing arrangements including cutting sheets to required shape / length and fixing with self tapping screws of required diameter and length, etc. as per manufacturer’s specifications.

Supplying and fixing 10 mm or suitable dia Anchor bolts at all heights for fixing sunshade brackets including cost of bolt,drilling charges,scaffolding charges if required etc complete as per instructions

Plain Cement Concrete work in 1:2:4 nominal mix using 20 mm and downgrade hard granite broken stone including all charges for mixing concrete, laying, consolidating, curing etc.complete at all levels,excluding cost of cement

Brick work in CM 1:6 with country burnt bricks for ground floor & super structure in all heights including cost all materials, labour charges and scaffolding charges but excluding cost of cement etc.complete

Cement plastering with CM 1:4,12 mm thick one coat floated hard and trowelled smooth at all levels,excluding cost of cement

Charges for plastering with neat cement flushing coat over the base plastering,excluding cost of cement

Roofing with first class MP roofing tiles 340 mm nominal size over rafter and reaper already provided (Using deptl. MP tiles).

Supplying to civil store M.P.Roofing tile 340 mm

Supplying to civil store M.P.Hip & Ridge tile

Resetting the existing M.P. hip and ridge tiles in surki mortar 1:½:1½ (or relaying) including finishing the edges at all heights

Providing surki mortar 1:½:1½ to the existing ridge, hip tiles and valley gutters including finishing the edges.

Surki mortar bordering to tile roof about 65 Sq cm .in section including adding cement at all heights as per deptl.instructions.

Ceiling with 4 mm non AC plain sheets as per IS14862 screwed on to the underside of frame work already provided including necessary SS screws, wire nails & cost of all materials & scaffolding charges etc. complete as per deptl. instructions.

Supplying and fixing Anjili wood planed and framed work in position to the lines and levels etc. complete as per deptl. instructions.

Providing, fabricating & fixing in position to the door frame already provided, first class well seasoned Anjili wood single leaf/double leaf fully paneled shutters with 150 x 35 mm bottom & lock frames, all other frames 100 x 35 mm & 18 mm thick panel planks including all labour charges for fixing all hardware but excluding cost of hardware etc.complete.

Providing & Fixing in position fully glazed shutters (top or center hung) in first class well seasoned Anjiliwood & 3 mm thick plain glass to suit the ventilator frames already provided with 70 x 30 mm frames and 20 x 12 mm teakwood beadings & brass wire nails including all charges for fixing hardware but excluding cost of hardware etc.complete.

Providing 3 mm thick plain glass for glazed shutters partition etc with wooden fillet, putty etc. including dismantling broken glass etc.

Providing and fixing PVC door of syntex or equivalant make with shutter frame made of extruded plastic section having dimension of 60 x 24 mm or nearest, paneling with single panel hollow plastic section of 20 mm thick with average wall thickness of 1 mm and outer frame of door made of extruded plastic section of 48 x 40 mm or nearest including providing and fixing all required fittings such as stainless steel butt hinges, PVC tower bolts, PVC handles etc.complete as per manufacturers specifications.

Providing guard bars to windows & ventilators using suitable size M.S. rods using contractor’s own MS bars

Providing and laying with approved brand rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in suitable colours laid on 20 mm thick cement mortar 1:4 (1 Cement: 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cementand matching pigments etc., complete.

Providing and fixing first quality ceramic glazed wall tiles conforming to IS :15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades of any size as approved by Engineer-in-Charge for dadoing to walls over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigmentof matching shade complete.

Supplying and fixing PVC floor trap (single or multy type) of approved brand 110 mm size with required provision of outlets and inlets as per manufacturers specifications, cutting and making good the walls and floors, etc. complete.

Supplying and fixing 125 mm (5 inch) Stainless steel floor gratings (two piece) to PVC trap as per instructions at site

Supplying conveying and fitting 550x400mm or nearest size wash hand basin of white glazed vitreous china approved quality with a pair of special alloy bolts for fixing the basin on walls with 1No. 15 mm heavy type CP brass pillar tap of approved make 1No.heavy type 15 mm PVC connection and 1No.15 mm CP regulating valve of superior make ,1No. 15mm CP waste coupling,32mm PVC waste pipe with cp learning nut 1No. etc. including cutting and making good the walls,etc. complete.

Supplying and fixing at all levels approved quality /brand European type vitreous china white glazed water closet pan with P/S trap and White/Black duro plastic seat and lid with CP brass hinges and CP rubber buffers, 10 litre capacity PVC low level flushing cistern of approved make with all fittings 1No.32mm CP brass flush bend, 1No:15mm superior PVC connection heavy type ,15mm CP regulating valve,cutting and making good the walls and floors including giving connection to sewer pipe with all necessary specials,etc. complete as per direction at site

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required :Kitchen sink with drain board 510x1040 mm bowl depth 250 mm each

Supplying Concealed Stop cock ¾ inch as per IS 8931

Supplying Angle valve with wall flange of standard range as per IS 8931

Supplying Long body bib cock of standard range as per IS 8931

Supplying to Civil store 100 mm CP brass shower rose with 15 mm / 20 mm inlet and of approved brand / manufacturer

Supplying 600 x 450 mm or nearest size bevelled edge mirror of approved quality superior make " with hard board or plastic sheet on the rear and fixing the same in position with necessary plugs & SS screws etc complete

Suppling and fixing 600 x20 mm or nearest Stainless steel heavy duty approved brand towel rod with brackets with necessary SS screws, pastic grips etc. complete

Supplying Health faucets of standard range approved by Engineer-in-Charge

Supplying and fixing best quality SS soap dish including cost of screws, wooden plugs etc.

Supplying and fixing PVC pipes conforming to IS 4985 class III, 6 kg/sq.cm pressure for lines with all required specials such as plain bends, single junctions, elbows, crosses, unions, shoes, door bends, double junctions, vent cowls, etc. with or without door including cutting masonry or concrete floors, sunshades, etc and making the holes good after finishing the work. wherever necessary and jointing pipes with approved quality resin cement and fixing pipes with MS fixing clamps screwed on to wooden plugs embedded in masonry wherever required and painting the clamps with two coats of enamel paint over one coat primer. This includes testing of joints complete at all levels. for waste water lines:110mm or nearest outer diameter

Supplying and fixing PVC pipes conforming to IS 4985 class III, 6 kg/sq.cm pressure for lines with all required specials such as plain bends, single junctions, elbows, crosses, unions, shoes, door bends, double junctions, vent cowls, etc. with or without door including cutting masonry or concrete floors, sunshades, etc and making the holes good after finishing the work. wherever necessary and jointing pipes with approved quality resin cement and fixing pipes with MS fixing clamps screwed on to wooden plugs embedded in masonry wherever required and painting the clamps with two coats of enamel paint over one coat primer. This includes testing of joints complete at all levels. for waste water lines 75mm or nearest outer dia.

Supplying, laying and jointing with solvent cement, Rigid PVC pipes conforming to IS 4985 Class V (10 Kg/cm2 pressure rating) for water lines with all required concealed (brass embeded) PVC specials, such as Tees, bends, elbow, union, reducer etc. with clamps if any including necessary cutting and making good the walls, earth work if required etc.complete for 50 mm OD Pipe

Supplying, laying and jointing with solvent cement, Rigid PVC pipes conforming to IS 4985 Class V (10 Kg/cm2 pressure rating) for water lines with all required concealed (brass embeded) PVC specials, such as Tees, bends, elbow, union, reducer etc. with clamps if any including necessary cutting and making good the walls, earth work if required etc.complete for 25 mm OD Pipe

Supplying, laying and jointing with solvent cement, Rigid PVC pipes conforming to IS 4985 Class V (10 Kg/cm2 pressure rating) for water lines with all required concealed (brass embeded) PVC specials, such as Tees, bends, elbow, union, reducer etc. with clamps if any including necessary cutting and making good the walls, earth work if required etc.complete for 20 mm OD Pipe

Earth work excavation in all classes of soil including narrickal but excluding hard rock which require blasting including back filling in basement & sides of foundation, depositing on bank within an initial lead of 50 m including breaking clods, watering, ramming and sectioning of spoil bank etc.complete- Up to 1.5 m depth from ground level.

Felling trees of the girth ( measured at a height of 1m above ground level ) including uprooting,cutting of trunks and branches and stacking of serviceable material and disposal of unserviceable material -Beyond 30 cm girth up to and including 60 cm girth

Trimming, dressing & sectioning of road berms, slopes on earth surface in all classes of soil and disposal of rubbish upto a distance of 150 M and levelling the area.

Painting one priming coat with approved quality wood primer on wood work after rubbing with sand paper and cleaning all the surface including all cost of materials labour etc.

Painting one priming coat on new/old iron work at all heighs with approved quality zinc chromate yellow metal primer of approved brand and quality at all heighs icluding cost of primer and materials,labour,scaffolding charges, cleaning the site etc.as per departmental instructions.

Painting with synthetic enamel paint using approved quality paint as specified one coat (over a priming coat already done and paid separately) for wood work/iron work after cleaning the surface including cost of all materials and labour.

Painting with synthetic enamel paint for each succeeding coat for woodwork/ ironwork including cost of all materials and labour.

Painting one coat of priming coat on plastered surface (interior) with approved quality cement primer after cleaning the surface including all cost of materials, labour etc.

Painting two coats with ready mixed plastic emulsion paint of approved quality and colour specified over the priming coat already done and paid separately after cleaning the surface well.

Painting with one coat of “ exterior primer” of approved quality to walls after neatly cleaning the surface by removing loose paint, dirt etc.by cleaning with water, scrapping etc. at all heights including cost of all materials, labour charges, scaffolding charges etc.complete as per instructions.

Painting with one coat of Exterior emulsion Paints of approved quality and colour over the priming coat already done and paid separately after cleaning with cotton waste including cost of all materials, labour charges, scaffolding charges etc complete at all heights as per departmental instructions

Painting with one coat to old surface/succeeding coat of external emulsion of approved quality and colour after cleaning with cotton waste including cost of all materials, labour charges, scaffolding charges etc complete at all heights as per departmental instructions

Polishing the existing mosaic floor with suitable mosaic grinder/grinding stone

Floor polishing on masonry or concrete floors with wax polish of approved brand and manufacture.

Supplying and fxing stainless steel (SS 316) mosquito proof net to suit the existing door/window / Ventilator frames with suitable fixing arrangements as per instruction of Engineer- in -charge

Supplying stainless steel butt hinges 150 mm to department

Supplying at site Stainless steel tower bolt ,200 mm long

Supplying 12 mm dia 300 mm long stainless steel Aldrop with all fixtures.

Supplying to Civil store Pad Lock 50 mm “Godrej Navatal “ with duplicate keys

Supplying & fixing flat iron hold fasts suitable to doors, windows ventilators etc. with necessary SS screws for fixing.

Supplying stainless steel butt hinges 75 mm to department

Supplying stainless steel hooks & eyes, 100 mm to department

Supplying stainless steel hooks & eyes, 200 mm to department

Supplying at site Stainless steel tower bolt ,150 mm long

Supply of Stain less steel screws suitable gauge, 25 mm in length

Providing and fixing SS door handle 150 mm with SS screws etc. complete

Supply and fixing stain less steel hanger unit having min 3 hooks

Painting letters or figures 2.50 cm, 4 cm, and 5 cm ht. Block, Roman, Italic or Indian with any kind of paint.

Supplying to civil store ball valve forged "ZOLOTO" or equivalent brand, 50 mm size

Supplying to civil store ball valve forged "ZOLOTO" or equivalent brand, 25 mm size

Providing Plumber for waterline repair works for normal and odd hours (for 8 hour duty)

Local application of chemical insecticides of brands specified in IS-6313 for anti- termite treatment of the interior portion of building like cup boards , walls, roof ceiling, other woodworks etc (Payment is for per Sq.m area applied)

BREC Projects Private Limited