Loading…
Loading…
Tender Value
₹1.3 Cr
EMD Value
₹2.5 L
Closing Date
7 Sept 2026, 3:00 pm
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
Above/Below/Par
SIGNAL
16 conditions · 4 needing a document upload
Financial Eligibility Criteria: The tenderer must have minimum average annual contractual turnover of V/N or 'V' whichever is less; where: V= Advertised value of the tender in Crores of Rupees. N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover.
The Tenderers shall submit requisite information as per Annexure-VIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
The tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: 1Three similar works each costing not less than the amount equal to 30% of advertised value of the tender OR 2Two similar works each costing not less than the amount equal to 40% of advertised value of the tender OR 3One similar work costing not less than the amount equal to 60% of advertised value of the tender
UPLOADING OF THE CERTIFICATE:-The tenderers shall submit a copy of certificate stating that all their statements/documents submitted along with bid are true and factual. Standard format of certificate to be submitted by the bidder is enclosed as Annexure-V. In addition to Annexure-V, in case of other than Company/Proprietary firm. Annexure- V(A) shall also be submitted by the each member of a Partnership Firm/ Joint Venture (JV) / Hindu Undivided Family (HUF / Limited Liability Partnership (LLP)etc., as the case may be. Non submission of above certificate(s) by the bidder shall result in summarily rejection of his/their bid. It shall be mandatorily incumbent upon the tenderer to identify, state and submit the supporting documents duly self-attested/digitally signed by which they/he is qualifying the Qualifying Criteria mentioned in the Tender Document.
DEFINATION OF SIMILIAR NATURE OF WORK:-Any Signaling Work of 1.1.1 EI/PI/RRI/IBH/ABH/LC Gate Interlocking Track circuit works /Axle counter works etc.
8 conditions · 2 needing a document upload
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
All payment and other conditions are attached with tender document.
Although year of specification is given in the schedule, last amendment, if any, shall apply.
All tenderer must have valid GSTN number and rates must be inclusive of GST Act and itsamendment.
Compliance of GST act/rules & correction/modification issue by railway board with regard toGST act shall be binding on contractor & railway.
Genral instruction :- 1 The offer will be evaluated based on certificates enclosed with theoriginal offer only. The Railways will not enter into any correspondence to get thesecertificates subsequently and the offer shall be evaluated based on the documents submittedalong with the offer.2 Tenderer may please note that meeting of eligibility criteria is strictlybased on completion certificates issued by the executive in charge of work and not linkedwith mere list of works claimed to have been executed by the tenderer or a copy of workorder from Railways. 3 Tenderer may please note that fulfilling of eligibility clause shall beascertained only from the completion certificates issued by the executive-in-charge of workand mere list of works claimed to have been executed by the tenderer or a copy of workorder from Railways shall not be enough. It may also be noted that cognizance of thoseworks, which are nearing completion or have been almost completed, shall not be taken onlythose completion certificates, wherein successful commissioning satisfactory performanceof work have been clearly unambiguously acknowledged by Executive-incharge of anyRailway Unit or any Govt. Dept./Undertaking for any similar work shall be considered for thispurpose.4 Any variation to quantities in any item and its associated wiring material account ofsupply and installation will have to be born by the tenderer. Railway Engineer s decision inthis regard shall be final.5 All drawings related with the work can be obtained from the officeof DRM Kota on any working day during office hours.
Enhancing safety by replacingdefective/ worn-out TLJBs, Track leads, point insulations,ground connections, Location boxes & foundations, Signalassemblies & foundations including trenching, laying ofcables, terminations etc. in the section of ADSTE/ BTE onKota Division.
KOTA-SNT-SIG-2025-45R2~WCR
KOTA-SNT-SIG-2025-45R2
Open
Works - General
12 Months
Kota, Rajasthan
₹0
₹2.5 L
7 Aug 2026
7 Aug 2026
24 Aug 2026
87 items across 2 schedules · ₹1,26,62,856.35 total
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| 1 | (i) Supply of 4 conductor disconnect terminal block with test & measurement facility, with screw less, spring cage clamp connections suitable for 0.08 to 2.5 Sq.mm conductor with current capacity of 16 Amps as per RDSO Spcn. No. RDSO/SPN/189/2004 Ver. 3.0 or latest. | Numbers | 400.00 | 66.79 | 26,716 |
| 2 | ii) Supply of End Stop 10mm for above Din 35 Rail. | Numbers | 200.00 | 11.37 | 2,274 |
| 3 | Supply of PD1 (21KHz) card for GG Tronic make HASSDAC as per RDSO specification No.RDSO/SPN/177/2012 withversion 3.0 or latest with RDSO inspection Make/Brand:- GG Tronics. Make / Brand: G.G. TRONICS INDIA PRIVATE LIMITED | Numbers | 8.00 | 39,530 | 3,16,240 |
| 4 | Supply of PD2 25 KHZ Card suitable for GG Tronic make SSDAC/HASSDAC as per RDSO Spec. no. RDSO/SPN/177/2012 Ver 3.0 or latest make/brand:-GG Tronics Make / Brand: G.G. TRONICS INDIA PRIVATE LIMITED | Numbers | 8.00 | 39,530 | 3,16,240 |
| 5 | Supply of 21 KHZ/25 KHZ Transmitter coil assembly for HASSDAC Systems RDSO Specn. No. RDSO/SPN/177/2012 (Ver.3) Make-G.G.Tronics. Make/Brand:- GG Tronics ,HSN Code: 85309000 | Numbers | 6.00 | 44,861.24 | 2,69,167.44 |
| 6 | Supply of 21 KHZ/25 KHZ Receiver coil assembly for HASSDAC Systems RDSO Specn. No. RDSO/SPN/177/2012 (Ver.3) Make-G.G.Tronics. Make/Brand:- GG Tronics , HSN Code:- 85309000HSN | Numbers | 6.00 | 44,861.24 | 2,69,167.44 |
| 7 | 21/25 KHZ TX Coil Assembly - 15 meter cable length Base clamp split-G36-T212505 for HASSDAC system suitable for G.G. Tronics India Pvt. Ltd. specification no. RDSO/SPN/177/2012 Version3, Make G.G.Tronics or similar | Numbers | 2.00 | 43,660 | 87,320 |
| 8 | 21/25 KHZ RX Coil Assembly - 15 meter cable length Base clamp split-G36-R212505 for HASSDAC system suitable for G.G. Tronics India Pvt. Ltd. specification no. RDSO/SPN/177/2012 Version3, Make G.G.Tronics or similar | Numbers | 2.00 | 43,660 | 87,320 |
| 9 | DC-DC Converter card for Field Unit of Multi Section Digital Axle Counter Systems of CEL Make as per RDSO Specn. No. RDSO/SPN/176/2013 or latest. Firm's Offer- Make/Brand-C E L | Numbers | 2.00 | 26,786 | 53,572 |
| 10 | Supply of MODEM card for Field unit compatible with existing CEL make Multi Section Digital Axle Counter Systems as per RDSO Specn. No. RDSO/SPN/176/2013 or latest. (CEL make) Accepted Make: CEL | Numbers | 2.00 | 44,840 | 89,680 |
| 11 | Supply of SCC1 for Field Unit compatible with existing CEL make Multi Section Digital Axle Counter Systems as per RDSO Specn. No. RDSO/SPN/176/2013 or latest. Accepted Make: CEL | Numbers | 3.00 | 43,306 | 1,29,918 |
| 12 | Supply of SCC2 for Field Unit compatible with existing CEL make Multi Section Digital Axle Counter Systems as per RDSO Specn. No. RDSO/SPN/176/2013 or latest. Accepted Make: CEL | Numbers | 3.00 | 43,306 | 1,29,918 |
| 13 | Supply of Digital Cards for SSDAC as per site requirement as per RDSO Specn. No. RDSO/SPN /177/ 2012 (Ver. 3) or latest. | Numbers | 2.00 | 1,72,870 | 3,45,740 |
| 14 | Supply of Analog Cards for SSDAC as per site requirement as per RDSO Specn. No. RDSO/SPN/177/ 2012 (Ver. 3) or latest. | Numbers | 2.00 | 1,06,200 | 2,12,400 |
| 15 | "Supply of High power main signal with LED aspect integrated type, current Regulator as per RDSO Specn. No RDSO/SPN/199/2025 (Rev. 1.2) or latest. Red" | Numbers | 52.00 | 8,243.51 | 4,28,662.52 |
| 16 | "Supply of High power main signal with LED aspect integrated type, current Regulator as per RDSO Specn. No RDSO/SPN/199/2025 (Rev. 1.2) or latest. Yellow" | Numbers | 52.00 | 8,243.51 | 4,28,662.52 |
| 17 | Supply of High power main signal with LED aspect integrated type, current Regulator as per RDSO Specn. No RDSO/SPN/199/2025 (Rev. 1.2) or latest. Green | Numbers | 52.00 | 9,351.57 | 4,86,281.64 |
| 18 | Supply of calling ON Unit LED integrated type as per RDSO Specn. No RDSO/SPN/153/2023 Rev.5.0. or latest. | Numbers | 52.00 | 6,176.82 | 3,21,194.64 |
| 19 | Supply of LED for shunt signal integrated type as per RDSO Specn. No RDSO/SPN/153/2023 Rev.5.0. or latest. | Numbers | 52.00 | 5,070.97 | 2,63,690.44 |
| 20 | Supply of Thermo shrink Jointing Kit for jointing underground 0.9 mm dia. cond. 4/6 quad cables as per specn No. IRS: TC- 77/2012 (Rev.3.0) with Amend. 1, 2 & 3 or latest. | Numbers | 13.00 | 3,402.91 | 44,237.83 |
| 21 | Supply of Earth Electrode assembly as per Drg. No. S&T/CON/KOTA/EARTHING/01 ALT - 01. All nut, Bolts & Lugs to be of stainless steel. The earth electrode pipe shall be 'B' Class/ Medium Grade as per Specification No. IS: 1239 Pt. 1/ 2004 of Nominal Inner Dia 50mm, Outside dia (Max 60.8 mm, Min 59.7 mm), Thickness (3.6mm), Tolerance in Thickness ('+' not limited, '-' 12.5 percent). | Numbers | 22.00 | 1,313.36 | 28,893.92 |
| 22 | Supply of Electromagnetic boom holding / locking system with +VE boom locking operated on 110VDC as per drawing attached | Pair | 52.00 | 25,283.43 | 13,14,738.36 |
| 23 | Supply of Timing Belt for locking in ELB. confirming to RDSO/SPN/208/2012 ver. 2.0.or latest amendment. | Numbers | 52.00 | 460.2 | 23,930.4 |
| 24 | "Supply of Chlorinated rubber Paint as per IS 13467 : 1992 suitable for applying on insulated rail joint. Colour:- Grey ( Warranty Period : Upto 30 months from the date of supply)" | Litre | 260.00 | 271.4 | 70,564 |
| 25 | "SUPPLY OF MAPLE 4C , INTEGRATE MULTIPLEXER (TDM) FOR CONVERTION OF E ONE TO 64 KBPS, 19"" RACK MOUNTABLE OF 1 U HEIGHT, 4*E 1 UPLINK, 4 SERVICE SLOTS. ONE SERVICE SLOT POPULATED WITH 2w/4w E&M CARD SUPPORTING UP TO 8 INTERFACE, BALANCE 2 SLOT EMPTY, UNIT UP LINK E ONE 1+1 PRODUCTION, SHOULD SUPPORT UP TO 4 DIRECTION, POWERSUPPLY SUITABLE FOR AC & DC WORKING. MAKE : MRO TEK (MAPLE 4C/4E1/AC(V4) OR FABIO 4C OR SIMILAR" | Numbers | 4.00 | 44,250 | 1,77,000 |
| 26 | Supply of 108 Mbps TDM over Ethernet Access Multiplexer with provision of 4 DTE E1 channel over fibre port, fibre port supporting single mode with driving distance upto 15 Kms plus one Ethernet port 10/100 Mbps, power supply AC / DC option from a single socket. Mrotek model ECAT-01L as per specification. | Numbers | 4.00 | 21,611.01 | 86,444.04 |
| Schedule total | ₹60,09,973.19 | ||||
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
TD SIG 2025 45 R2
ATTACHMENT
TDKOTA-SNT-SIG-2025-45-R2-U.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].