Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L-1₹5.9 CrAccepted-Finance | ₹5.9 Cr | L-1 | Accepted-Finance L-1 bidder and submitted all the necessary documents as per NIT |
| 2 | L-2₹6.2 Cr+₹28.1 L (4.76%)Rejected-Finance RAI NIVAS SREE RAM KUNJ NEAR ST EXAVER SCHOOL GATE NO 2 NAWADIH P O POLITECNIC DHANBAD 828130 DHANBAD JH 828130 | DHANBAD | DHANBAD | JHARKHAND | 828130 | ₹6.2 Cr+₹28.1 L (4.76%) | L-2 | Rejected-Finance L-2 bidder. |
| 3 | L-3₹11.1 Cr+₹5.2 Cr (87.7%)Rejected-Finance | ₹11.1 Cr+₹5.2 Cr (87.7%) | L-3 | Rejected-Finance L-3 bidder. |
| 4 | Rejected-Technical | - | - | Rejected-Technical the bidder did not submit MOA and AOA against legal status of Private Limited Company and Undetaking and LOB submitted is not as per valid format as per NIT |
Tender Value
₹10.3 Cr
EMD Value
₹12.9 L
Closing Date
13 Mar 2025, 5:00 pmClosed
GM(Civil)
Office of GM (Civil), CED HQ, Koyla Nagar, Dhanbad
Upgradation of A and B and others type quarters at Jagjiwan Nagar under JNTA
2025_BCCL_329806_1
BCCL/CED/TC/eNIT-62/24-25/1326 dated 20.02.2025
Open Tender
Civil Works - Buildings
Percentage
365 days
Jagjiwan Nagar
As per NIT
9 documents required · 9 mandatory
₹12.9 L
18 Jul 2025
21 Feb 2025
14 Mar 2025
21 Feb 2025
13 Mar 2025
21 Feb 2025
21 Feb 2025 - 3 Mar 2025
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately). For fixed portion : Powder coated aluminium (minimum thickness of powder coating 50 micron) | 20,032.32 | KG | 398 | ₹79,72,863.36 |
| 2 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :One or more coats on old work | 9,743.45 | sqm | 68.3 | ₹6,65,477.64 |
| 3 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters:35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws | 2,891.94 | cum | 1,644 | ₹47,54,349.36 |
| 4 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately).Kiln seasoned and chemically treated hollock wood | 30.77 | cum | 63,235 | ₹19,45,740.95 |
| 5 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :New work (two or more coats) over and including water thinnable priming coat with cement primer | 91,899.77 | sqm | 133.35 | ₹1,22,54,834.33 |
| 6 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. | 1,680 | cum | 173.4 | ₹2,91,312 |
| 7 | Easing and adjusting of window as per instruction of i/c including taking down &refiting of shutter &all complete door | 874 | each | 802.37 | ₹7,01,271.38 |
| 8 | Easing and adjusting of window as per instruction of i/c including taking down &refiting of shutter &all complete window | 874 | each | 386.88 | ₹3,38,133.12 |
| 9 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two or more coats on new work | 5,051.5 | sqm | 103.6 | ₹5,23,335.4 |
| 10 | Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. | 64,329.84 | sqm | 15.45 | ₹9,93,896.01 |
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.05 MB
BOQ_341843.xls
BOQ • 0.29 MB
164026155.html
Tender Documents • 0.06 MB
164111926.pdf
Tender Documents • 3.15 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .