Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹28.7 LAccepted-AOC 231 JAGGI GARDEN BALDEV NAGAR AMBALA CITY 134003 | AMBALA CITY | AMBALA | HARYANA | 134003 | L1 | Accepted-AOC LOWEST BIDDER | |
| 2 | L2₹30.4 L+₹1.1 L (3.66%)Rejected-Finance 27 19 F F D BLOCK CHATTARPUR EXTN SOUTH WEST DELHI DELHI 110075 | SOUTH WEST DELHI | DELHI | 110075 | L2 | Rejected-Finance OTHER THAN LOWEST BIDDER |
Tender Value
₹40 L
EMD Value
₹80,000
Closing Date
2 Jan 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE AF AMBALA
GE AF AMBALA
GE AF/AMB-T-47/2022-23 REPAIR/MAINT OF WSA IN TECHNICAL AREA AT AF STN AMBALA UNDER GE (AF) AMBALA
2022_MES_568056_1
GE AF/AMB-T-47/2022-23
Open Tender
Civil Works
Item Rate
240 days
GE AF AMBALA
ALL AS PER NIT AND TENDER DOCUMENTS
10 documents required · 10 mandatory
₹500
Yes
GE AF AMBALA
₹80,000
Yes
9 Feb 2023
8 Dec 2022
4 Jan 2023
8 Dec 2022
2 Jan 2023
21 Dec 2022
13 Dec 2022 - 20 Dec 2022
Amount
B/R Portion
M & L for Forming embankments including raising earth raising from base, spreading in layers not exceeding 30cm thick, watering, ramming / rolling and finishing to required size, shape, etc. complete all as specified and as directed for the following levels:- (Note: The approved earth/soil to be brought fom out side of the MOD land).
height not exceeding 1.5m.
height exceeding 1.5m but not exceeding 4.5m.
height exceeding 4.5m but not exceeding 6m.
M&L for Sand filling under floors/ firing range,Pavement or in foundations including watering and consolidation.
Supply and laying sawdust in small range firing but with compacted thickness complete all as specified and directed.
Taking down cement plaster from brick or stone wall etc including racking out joint, hacking for key scrubbing down with water etc complete all as specified and as directed.
M&L for rough cast plaster including 15mm thick rendering in CM 1:3 on brick wall or concrete concrete surfaces complete all as specified in SSR Part - I clause 14.22 complete all as specified and directed. Note : Rough cast finish to be done as below :- After applying the under coat of cement mortar 1:3 and while it is still in plasic state the rough cast mixture consisting of crushed stone or fine gravel agg (which is generally of size between 6 to 12mm depending on the texture required ) mixed with course sand and cement in the ratio of 1 : 1 : 1 shall be applied and finished even. The mix of cement and sand shall be made slightly wetter than normal for rendering to ensure that larger agg are thoroughly covered.
M&L rendering 15mm thick on fair face of brick walls or concrete surfaces in CM 1:4 mixed with WPC @ of 3% by wt of cement finished even and smooth without using extra cement complete all as specified and directed.
Supply only integral water proofing compound/liquid etc complete all as specified and directed by Engr-in-Charge.
Material & Labour for preparation of newly plastered surfaces and applying two coat of exterior acrylic emulsion paint over a coat of primer in camouflaging pattern of any shape and to any pattern complete all as specified and directed by Engineer-in-charge.
Demolition of cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed by Engr-in-charge.
M & L for Plain Cement concrete 1:4:8, type D2 (using 40mm graded stone aggregates) in foundations, filling and mass concrete as in sub base of floors complete all as specified and directed by Engr-in-charge.
Material and labour for 75 mm thick cement concrete, 1:3:6, type C-2, ( using 20 mm graded aggregates) as in path/pavings/plinth protection etc; laid in bays including finishing the concrete surface even and smooth without using extra cement complete all as specified and directed by Engr-in-charge.
M & L for Chequered/Designer cement concrete tiles 300x300x20mm thick,set, jointed and pointed in neat cement slurry in floors with pigment over a screed bed of 15mm thick in CM 1:6 complete all as specified and directed by Engr-in-charge.
Material and labour for PCC,1:2:4, type B-1 (using 20mm graded mechanically crushed stone aggregates) as in bonding/locking of edges of interlocking tiles including weathering and slightly rounded or chamfered on edges and threating including necessary form work complete all as specified and as directed.
Demoliton of wall and ceiling boards (fibre, pulp, insulation etc) or insulation boards/slabs/blankets ) any thickness, including cover fillets complete all as specified and directed by Engr-in-charge.
S&F powder coated GI frame work for seamless ceiling comprising of GI perimeter channel 0.55mm thick with two unequal flanges of 20 and 30mm and web of 27mm fixed to surrounding wall using nylon sleeves at appx 900mm cenetre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 mtr length) of 0.55mm thickness having kurled web of 50mm and flange of 26mm each swith lips of 10.5mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457mm centre to centre including hangers 6mm dia GI (upto 1200mm length) adjusting level fixed to roof slabs by means ceiling cleats made out of GI flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia 40mm long complete all as specified including 9 to 10mm thick ceiling tiles/board for insulation and accoustic purpose of size 600 x 600mm decorative type with silver foil coating on back side complete all as specified and directed. Ceiling board should of make : Saint Gobian/Armstrong/Gysboard/Hilux/Kingston for insulation and accoustic purpose fixed with staples with on snap grid and 4mm dia GI wire with nuts, bolts, adjustable arrangement and washers etc complete all as specified and directed by Engr-in-charge.
S&F in replacement anodised aluminium partition wall or fixed type window/ventilator made out of aluminium anodised standard hollow section 100 x 44 x 1.60mm thick snap fit beading standartd rubber gasket 5.5mm thick glass or 12mm thick prelaminated particle board interior grade prelaminated one side with decorative choice laminates and other side balancing light grey lamination etccomplete all as specified and directed by Engr-in-charge.
S&F in replacement anodised aluminium door made out hollow aluminium section as mentioned below. Each door having 02 Nos disk or D type handle of 200mm long , two Nos aluminium tower bolts of 200 size , one No mortice lock of six levers with key in duplicate regulated by double action hudrolic floor door spring (Make - Sandhu/Titz) shutters to be partly glazed with 5mm thick tinted glass and partly panelled with 12mm thick prelaminated particle board fixed with glazing clips, rubber beading/gasket anodised aluminium beading screws etc complete all as specified and as directed. Make :- Anodised aluminium section : HINDALCO/JINDAL/INDALCO Glass : SAINT GOBIN/MODI GUARD/TATA CHOWKHATS SIZE : 100 X 44 X 1.60 MM THICK SHUTTERS VERTICLE STYLE : 100 X 44 X 1.60MM SHUTTERS LOCK RAIL : 150 X 44 X 1.60MM SHUTTERS BOTTOM RAIL : 200 X 44 X 1.60MM
Material & Labour for preparation of old or previously treated surfaces of RCC / Stone / Concrete / brick walls/ Asbestos Cement Sheet or plastered surfaces and applying one coat of exterior acrylic emulsion paint in camouflaging pattern of any shape and any pattern complete all as specified and directed by Engineer-in-charge.
Material and labour for one coat of synthetic enamel paint on old painted steel surfaces as in walls / roof trusses/purlins/rafters/angle iron posts etc complete all as specified and directed.
M&L for complete removal of existing treatment from plastered or unplastered surfaces of walls and applying two coats of distemper oil emulsion over a coat of 3mm putty complete all as specified and directed.
Demolition of brick work bult in cement mortar including all quoins arches, pillars etc complete all as specified and directed by Engr-in-charge.
Material and labour for brick work with sub class `B` brick old size in CM 1:4 straight or curved on plan exc 6m mean radious in drain etc. complete all as specified and directed by Engr-in-charge.
All as per item No 25 here-in-before but except bricks. Note :- Serviceable bricks obtained from Sl No 24 shall be used after proper cleaning.
Material and labour for 15 mm thick Rendering on brick work or concrete surfaces in CM 1:6 finished even and sommoth without using extra cement complete all as specified and directed by Engr-in-charge.
Supply and fixing in repairs, vitreous china urinal , half stall type white with gratings, union for discharge pipe, flush pipe and waste pipe, CP urinal spreader fixed to water supply pipe etc complete all as specified and directed by Engr-in-charge.
Supply and fixing in repairs, vitreous china urinal partition, white of size 310 x 700mm etc; complete all as specified and directed by Engr-in-charge.
Supply and fixing in repairs coloured oval type wash hand basin, size 580x450 mm, white, flat back, iron (for Hospilal use) excluding taps, waste, chain and plug and porcelain stopper but including brackets waste pipe 32mm, coupling etc fixed as in counter slab etc; complete all as specified and directed by Engr-in-charge.
Supply and fixing in repairs Toilet paper holder, cast copper alloy, chromium plated fixed in position, complete all as specified and directed by Engr-in-charge.
Supply and fixing in repair vitreous china wash down water closet pedestal pattern white excluding fixing bolts , flushing cistern and flush pipe complete but including PVC seat cover with aluminium hinges devices & EWC jet chromium plated with 1.00 mtr long PVC connection pipe complete all as specified and directed by Engr-in-charge.
Supply and fixing in repair CP grating of size 125mm complete all as specified and directed by Engr-in-charge..
S&F in repair aluminium alloy door closer hydraulically regulated, designation No 2 universal type, suitable for door shutter of 701 to 850mm in width and wt between 36 to 60Kg and fixed to door frame complete all as specified and directed by Engr-in-charge.
Dismantling of stone slabs and tiles of any description or thickness laid dry or laid dry and pointed in any mortar in floors, aprons etc complete all as specified and as directed.
M&L for machine cut kota stone slab flooring 18-20mm thick over 20mm screed bed in CM 1:4, jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and granite polishing etc complete all as specified and directed by Engr-in-charge.
Dismantling of floor hearth or wall tiling including cement morta,r bedding but not backing and removing serviceable tiles to store yard and rubbish off the premises complete all as specified and directed by Engr-in-charge.
M&L for non skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) jointless, area of each tile exc. 0.06 but not exc. 0.11 sqm in floors etc; set and jointed in neat cement slurry and pointed with white or colour cement to match the surface.over screed bed or bedding layer 15mm thick in cement mortar 1:4 complete all as specified and directed by Engr-in-charge.
M&L for coloured glazed designer ceramic tiles 300 x 450 x 7 to 8mm thick on vertical surface as in dado/skirting and jointed in neat cement slurry and pointed with white/colour cement to match with the surface over 15mm thick rendering in CM 1:4 complete all as specified and directed by Engr-in-charge.
Dismantling old unserviceable RCC/PVC water tank of capacity exc. 250 but n. exc. 500 ltrs cpacity including supply and fixing PVC water storage tank of 500 ltrs capacity HDPE double layered, cylindrical type fixed and hoisted in position on roof at any height complete with inlet/outlet of 20mm GI pipe connection including locking arrangement with ball valves high pressure with epoxy coated aluminium rod and high density plastic ball fixed as in repairs complete all as specified and directed by Engr-in-charge.
Hacking out old broken glass (any thickness) size, qauality or description from wooden/steel frames etc complete all as specified and directed by Engr-in-charge.
S&F 4mm thick sheet glass ordinary quality of glazing with oil putty or wooden beads in square not exc. 0.5sqm each panes complete all as specified and directed by Engr-in-charge.
Supply and fixing in repairs,15mm bore Bib taps, fancy type, cast copper alloy, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed by Engr-in-charge.
E/M Portion
Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. and removing materials to store for keeping in safe custody or for taking credit and making good disturbed surfaces of walls, floors, etc. complete all as specified and as directed by the Engineer in charge.
M&L Point Wiring using approved colour coding as per IS with Zerohalogen flame retardent (ZHFR) smoke free non toxic non corrosive with copper cable 1.5sqmm (nominal area) single core insulated and unsheathed stranded cable 1100 Volts grade and including (ERW) stove enamelled concealed conduit heavy duty ISI marked and unsheathed copper conductor complete all as specified and directed for four light point controlled by one way switch complete all as specified and directed by Engr-in-charge.
All as per item No.46 here-in-before but for One Exhaust Fan point controlled by one 5Amps switch.
All as per item No.46 here-in-before but for One 3 pin 5Amps socket point controlled by one switch on independent board.
All as per item No.46 here-in-before but with 2.5 Sqmm for 3 pin 16 Amps socket point controlled by one switch on independent board and 2.5Sqmm copper conductor green in colour as earth continuity conductor complete all as specified and directed by Engr-in-Charge.
M&L flame proof weather proof switch socket & plug combined 16 A 250V (2P + earth) complete all as specified and directed.
M&L flame proof weather proof switch socket & plug combined 6 A, 250V (2P + earth) complete all as specified and directed by Engr-in-Charge.
M&L for submain wiring alongwith earth wire with 3 x 4.0Sqmm FRLS insulated, unsheathed, multistranded, 1100 Volts grade copper conductor cable single core, drawn through and including ERW stove enameled steel conduit heavy duty ISI marked and its all accessories of suitable size concealed complete all as specified and directed by Engr-in-Charge. Note: Three runs of 4.0Sqmm copper cable and one run of steel conduit shall be measured as one unit length.
S&F LED light fitting 2x16 Watt flame proof, CMRI certified recommended for gas/ vapor group of IIA & IIIB, Zone 1 & 2 and IP 65 protection with die cast aluminum hosing with heat resistant toughened glass with LED tube light fixtures driver, holders, connector etc. Complete with all accessories prewired and including connecting up with three core flexible copper conductor cable with suitable size complete complete all as specified and directed by Engr-in-Charge.
S&F Switch flame Proof rotary type with termination box in LM-6 16 A single Pole 240V complete all as specified and directed by Engr-in-Charge.
M & L for brazing of copper strip at joint complete all as specified and directed by Engr-in-Charge.
M&L for Air termination, single pointed aluminium rod 12mm dia and 300mm long incl fixing base plate with insulator complete fixing on the top roof of the hanger complete all as specified.
S&F Test point terminal block made of gun metal or phosphorus bronze, size 75x75x25mm, drilled and screwed including 3 Nos 8mm dia, 25mm long hexagonal head screw, complete all as specified and directed by Engr-in-Charge.
M&L for earthing complete with copper earth plate electrode 600mmx600mmx3.15mm thick, buried directly in ground earth pit not less than 3mtr below ground level with top edge of earth plate not less than 2.25mtrs below ground level connected to copper earth strip of 20x3mm by two means of nuts, bolts, thimbles, chuck nuts, washers test points including one end firmly fixed with earth plate by means of nut and bolts and other end of copper strip to test point GI watering pipe, 20mm dia duly plugged shall be projected out at least 20 cms above the ground level including covering the earth electrode with charcoal dust salt all around not less than 15cm provision of earth pit RCC cover all as shown in electrical plate No. 3 of SSR Part I, 2009 etc including necessary earth and disposal of surplus soil complete and testing complete all as specified and directed by Engr-in-Charge. Note : The Earth result should be less than 3 ohm and the result will be checked in presence MES Rep.
M&L for PCC 1:2:4, type B-2 (using 20mm graded stone aggregates) as in coping etc including form work as required at site, complete all as specified and directed by Engr-in-Charge.
M&L for PCC 1:3:6, type C-2 (using 40mm graded stone aggregates) as in foundation, filling & mass concrete complete all as specified and directed by Engr-in-Charge.
S&F in repairs MCCB 160Amp, 4 pole 35KA with adjustable thermal release fixed magnetic protection complete all as specified and directed by Engr-in-Charge.
M&L Aluminium strip 25x3.15mm with saddle on and including on FRP insulator fixed on wall/MS sheet or floors including connecting to lightening arrester/earthing/test point strip should be brazed/welded at each joint complete all as specified and directed by Engr-in-Charge.
M&L copper strip 20x3.15mm and including with saddles on FRP insulator fixed on wall/MS sheet or floors including connecting to lightening arrester/earthing/test point strip should be brazed/welded at each joint complete all as specified and directed by Engr-in-Charge.
Supply, Installation, Testing and Commissioning of a set of maintenance free tripod earthing system consisting of 3 No. of Copper Bonded Earth Rod of 10 feet length, 17.2mm dia made of high tensile low carbon steel circular rods, molecularly bonded with 99.9% electrolytic grade copper on outer surface (minimum copper bonding thickness-250 microns) with exothermically jointed copper bus bar of 150x50x6mm for long lasting and connection. Each copper bonded rod and the exothermically jointed busbar both should be CPRI tested on at least 25KA Fault current to ensuring the high current carrying capacity of the system and earth rod should be certified by underwriter laboratories conforming to comply with UL467 international standard for grounding and bonding equipment. Each rod should be used with minimum 50kg earth enhancing compound that should be ROHS tested and have passed, Resisitivity of the earth enhancing compound should be less than 0.05 ohm meter - an international standard for Earth Enhancement Compound by NABL accredit Lab complete all as specified and directed by Engr-in-Charge. Note : The rate for interconnection of tripod earth with Copper strip of size 20x3 mm and poly carbonate earth pit cover-03 Nos shall deemed to be included in the quoted rates. The Earth result should be less than 1 ohm and the result will be checked in presence of user rep & MES Rep.
Supply, lowering, Installation, testing and commissioning of submersible pump set of capacity 25HP, electric driven 415V, TP suitable for 200/250mm dia bore well (Casing pipe size 200/250mm) supply and install complete and disconnecting all electric wiring carefully of old submersible motor and transport from site upto MES store for safe hand in the MES authorities, complete all as specified and directed by Engr-in-Charge.
S&F in repairs energy efficient LED street light fitting (beamer), 90W, input voltage 230VAC, 50Hz with ingress protection IP 65, CRI>70, PF>0.95, minimum 50000 burning hours, THD> 20, CRCA housing including all fixing arrengment like clamps, nuts, bolts, washers, 90W LED lamp with all accessories pre-wired and connecting with twin core twisted flexible copper conductor cable with all necessary staging, etc. for fixing at any locations complete all as specified and directed by Engr-in-Charge.
S&F in repairs energy efficient LED flood light fitting, 120W, input voltage 230VAC, 50Hz with ingress protection IP 65, CRI>70, PF>0.95, minimum 50000 burning hours, THD> 20, CRCA housing including all fixing arrengment like clamps, nuts, bolts, washers, 120W LED lamp with all accessories pre-wired and connecting with twin core twisted flexible copper conductor cable with all necessary staging, etc. for fixing at any locations complete all as specified and directed by Engr-in-Charge.
KULWANT SINGH
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .