CONSTRUCTION OF INDOOR SPORTS COMPLEX AT KESAR BAUG, MORBI.

NAME OF WORK :- CONSTRUCTION OF INDOOR SPORTS COMPLEX AT KESAR BAUG, MORBI.

Sr. No. Item Description Quantity Unit Rate Rate With 1% LC Amount in Rs.

Excavation for foundation upto 1.5 m depth including sorting out

1 and stacking of useful materials and disposing off the excavated 123.00 Cum 121.72 122.94

stuff upto 50 Meter lead.(A) Loose or soft soil

Excavation for foundation upto 1.5 m depth including sorting out

2 and stacking of useful materials and disposing off the excavated 123.00 Cum 155.77 157.33

stuff upto 50 Meter lead.(B) Dense or Hard soil

Excavation for foundation upto 1.5 m depth including sorting out

3 and stacking of useful materials and disposing off the excavated 370.00 Cum 264.44 267.08

stuff upto 50 Meter lead.(C) Hard Murrum

Excavation for foundation for depth from 1.5 m to 3.0 m including

sorting out and stacking of useful materials and disposing off the

excavated stuff upto 50 Meter lead.(B) Dense or Hard soil

Excavation for foundation for depth from 1.5 m to 3.0 m including

sorting out and stacking of useful materials and disposing off the

excavated stuff upto 50 Meter lead. (C) Hard Murrum

Excavation for foundation for depth from 3.0 m to 5.0 m including

sorting out and stacking of useful materials and disposing off the

excavated stuff upto 50 Meter lead.(B) Dense or Hard soil

Excavation for foundation for depth from 3.0 m to 5.0 m including

sorting out and stacking of useful materials and disposing of the

excavated stuff upto 50 Meter lead.(C) Hard Murrum

Excavation for foundation for depth from 3.0 m to 5.0 m including

sorting out and stacking of useful materials and disposing off the

excavated stuff upto 50 Meter lead.(D) Soft rock not requiring

Filling available excavated earth (excluding rock) in trenches.

plinth, sides of foundations etc. in layers not exceeding 20 cm. in

depth consolidating each disposited layer by ramming and

Filling in foundation and plinth with murrum or selected soil in layers of

10 20cm. thickness including watering, ramming and consolidating etc. 289.00 Cum 298.79 301.78

Rolling and consolidation of soling including filling in depression which

11 occur during the process, with power roler 8 tonne to 12 tonne 442.00 SqMt 22.52 22.75

Rolling and consolidation using vibratory road roller 8 - 10tonne

12 capacity (incl. watering)(A) Earth work (layer not exceeding 200mm 208.00 Cum 32.76 33.09

Uncoursed Rubble Masonry with hard stone of approved quality in

13 foundations and plinth in Cement Mortar 1:5 (1cement : 5-coarse sand 105.00 Cum 2602.88 2628.91

including levelling up etc. complete

Providing and laying cement concrete 1:2:4 (1- Cement : 2- Coarse sand

: 4- graded stone aggregates 20 mm nominal size) and curing complete

excluding cost of formwork in (A) Foundation and Plinth

Providing and laying cement concrete flooring 1:2:4 (1cement : 2-

coarse sand : 4-graded stone aggregate 20mm nominal size) laid in one

layer and finished with a floating coat of neat cement. (B) 50mm thick.

Providing and laying controlled cement concrete M.250 and curing

complete including the cost of formwork and excluding cost of

reinforcement for reinforced concrete work in (A) Foundations,

footings and Mass concrete

Providing and laying controlled cement concrete M.250 and curing

complete including the cost of formwork and excluding the cost of

reinforcement for reinforced concrete work in (D) Columns, Pillars

posts and struts, upto All Floor level.

Sr. No. Item Description Quantity Unit Rate Rate With 1% LC Amount in Rs.

Anti-Termite System:Providing and laying of permanent piping

technology anti-termite treatment before flooring work by installing

LLDP (Low linear density polyethylene) tube of 8 mm O.D. & 6.4 mm

1.D. with inbuilt pressure compensation chip every 30 cm interval in

the tube, having working pressure of 2 Kg/cm2 and release rate of

Itr/hour fixed by P-clips and nails. The LLDP pipe shall be installed at

the entire periphery of the building and at internal network of building

at a depth of 20 to 200 mm under floor at every 2 to 3 mtr. c/c distance

(adjusted as per building layout ) & Ends of loop pass through a PVC

elbow of minimum 32 mm ID at junction box of wall and floor level,

entering into a steel reinforced grooved flexible pipe of minimum

mm ID leading into junction box and the loops shall terminate in

junction boxes & test every junction during injecting chemicals for

termite control treatment. The anti termite chemical Imidacloprid

30.5% SC mix as per IS-6313 (part III) shall be injected by the pressure

pump diluted with water @ 10.5 ml/5 ltr of water at the rate of

Kg/sq.cm @ 5 Ltr/SMT. The contractor shall submit approved line plan

for piping system and junction boxes dully approved by Engineer-in-

Charge with bond of 5 year warranty.(i)Anti Termite chemical injected

area (Chemical injecting incl. labour cost

Providing and laying controlled cement concrete M.250 and curing

complete including the cost of formwork and excluding the cost of

reinforcement for reinforced concrete work in (C) Plinth Beams

Providing and laying controlled cement concrete M.250 and curing

complete including the cost of formwork and excluding the cost of

reinforcement for reinforced concrete work in (D) Wall For All Floor

Providing and laying controlled cement concrete M.250 and curing

complete including the cost of formwork and excluding the cost of

reinforcement for reinforced concrete work in (C) Slab Beams upto All

Extra for additional height of propping and centering where the height

of propping and centering exceeds 4 .O M between supporting floor to

22 ceiling including temporary brick or stone pillars for supporting as 213.00 Sq.mt 707.77 714.85

required. (ii) Height more than 5.0 M.and upto 6.0 M.

Providing and laying controlled cement concrete M.250 and curing

complete including the cost of formwork and excluding the cost of

reinforcement for reinforced concrete work in (C) slab up to All Floor

Providing and laying controlled cement concrete M.250 and curing

complete including the cost of formwork and excluding the cost of

reinforcement for reinforced concrete work in (E) Staircase upto All

Providing and laying controlled cement concrete M.200 and curing

complete including the cost of formwork and excluding the cost of

25 reinforcement for reinforced concrete work in (C) Lintels upto All floor 7.00 Cum 6419.94 6484.14

Providing and laying controlled cement concrete M.200 and curing

complete including the cost of formwork and excluding the cost of

reinforcement for reinforced concrete work in (C) Chajjah upto All

Providing TMT Bar FE 500/500D reinforcement for R.C.C. work

27 including bending, binding and placing in position complete upto All 283575.00 Kg. 78.60 79.39

Brick work using common burnt clay building bricks having crushing

strength not less than 35 kg./Sq.Cm. in foundation and plinth in

Cement Mortar 1:5. (1- Cement : 5 -fine sand)(B) Conventional

Brick work using common burnt clay building bricks having crushing

strength not less than 35 kg./Sq.Cm. in superstructure above plinth

level upto All floor in Cement Mortar 1:5. (1- Cement : 5 -fine sand) (B)

Sr. No. Item Description Quantity Unit Rate Rate With 1% LC Amount in Rs.

Half brick masonry in common brunt clay building bricks having

crushing strength not less than 35 Kg/Sq.Cm. in Cement mortar 1:4 (1-

30 Cement : 4 -coarse sand ) in superstructure above plinth level upto All 74.00 Sq.mt. 689.97 696.87

floor (B) Conventional

Providing 15mm thick cement plaster in single coat on Rough

(Similar)side of single or half brick walls for interior plastering upto All

floor and finished even and smooth in (iii) Cement mortar 1:3 (1-

Providing 10mm thick cement plaster in single coat on concrete ceilings

and sofits of stairs for interior plastering upto Ground floor and

finished even and smooth in. (i) Cement mortar 1:3 (1-cement:3-sand)

Providing 15mm thick cement plaster in single coat on Rough

(Similar)side of single or half brick walls for exterior plastering upto

Basement Floor+ ground floor and finished even and smooth in (i)

Cement mortar 1:3 (1-cement:3-sand)

Supply & fixing of Decorative Natural Type ARTIFICIAL STONE CLADDIN

on exterior walls up to any height above ground level laid over on

based coat of 15mm cement plaster With Chemical and jointed with

34 grey cement slurry with matching pigment incl. rubbing and polishing 50.00 Sq.mt 3803.00 3841.03

half rounding edge etc. complete colour and shades approved by

engineer in charge.

Providing and laying Texture Plaster on exterior walls up to any height

above ground level on based coat of 15mm cement plaster smooth

35 surface, layer with 3mm styrene acrylic polimer based material as per 1970.00 R mt 528.00 533.28

approved pattern complete as per specification and direction by

engineer in charge.

Making and finishing Decorative Groove Work in exterior plastering

Providing cement vata (10cm. x 10 cm. size) quarter round in cement

37 mortar 1:1 including neat cement finishing, watering etc. complete. 1970.00 R mt 24.04 24.28

38 Providing and Fixing Chicken Mess Jali 350.00 Sqm 187.00 188.87

Providing and fixing single layer waterproof gypusm board 12.5 mm

thick of the make Newgood Group Co. Ltd. or equivalent & Newgood

Group Co. Ltd. company sections using waterproof board of size

mm x 1830 mm x 8.0 mm suspended by G.I suapender of size 25 mm x

3 mm with intermediate channel of size 18 mm x 40 mm x 0.80 mm at

1220 mm center to center ceiling section of size 40 mm x 35 mm x

39 mm at 457 mm center to center and perimetre chanel A of size 20 mm 446.00 Sqm 600.94 606.95

x 27 mm x 30 mm x 0.50 mm at edges & drops including paper tap sand

sofit cleat, anchor fastener, scoch bolt connecting cleat joining

compound top coat on ceiling including making necessary opening for

light fitting, diffuser etc. complete as per detail drawing as directed.

Providing and fixing false ceiling at all height including providing and

fixing of frame work made of special sections, power pressed from M.S.

sheets and galvanized with zinc coating of 120 gms/sqm (both side

inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm

wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm

centre to centre, one flange fixed to the ceiling with dash fastener

mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to

the angle hangers of 25x10x0.50 mm of required length with nuts &

bolts of required size and other end of angle hanger fixed with

intermediate G.I. channels 45x15x0.9 mm running at the spacing of

1200 mm centre to centre, to which the ceiling section 0.5 mm thick

bottom wedge of 80 mm with tapered flanges of 26 mm each having

lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a

direction perpendicular to G.I. intermediate channel with connecting

clips made out of 2.64 mm dia x 230 mm long G.I. wire at every

junction, including fixing perimeter channels 0.5 mm thick 27 mm high

having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed

to wall/partition with the help of rawl plugs at 450 mm centre, with

25mm long dry wall screws @ 230 mm interval, including fixing of

gypsum board to ceiling section and perimeter channel with the help of

dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing

and finishing to a flush finish of tapered and square edges of the board

Sr. No. Item Description Quantity Unit Rate Rate With 1% LC Amount in Rs.

Fully Perforated Gypsum Plaster Board of size 1200 x 2400x12.5 mm

having approx. 15 % perforated area with perforation size and pattern

as approved by the Engineerin-charge and as per manufacturer's

specification, with all 4 side tapered and backed by acoustical tissue

with NRC value not less than

Providing and fixing PVC plain colour false ceiling with grid type with

alu frame consisting of 600 mm x 600mm 3mm thick plain PVC sheet

used as panel insert in a frame work made using anodized alluminium T

section of size 1” x 1” (25 x 25mm, 19 gauge or 1mm thick) in square

pattern of grid sizes of 2 x 2 (600 x 600mm). The alluminium frame

work is supported from the ceiling with the help of G.I. hook and G.I.

wire/6mm M.S. rods of required sizes to maintain proper level etc. The

aluminium frame work is supported on side wall with the use of

alluminium L section of size 1 x 1 (25 x 25mm) angles et. Complete as

per direction of Engineer in charge. Manufactures, specification and

Prividing & Fixing Wooden Flooring With 18 mm Solid Wooden Planks

in Size of 1.5mt x 0.15mt in Interlocking Pattern With pu Polishing (wall

nut shade) Fixing to Floor with one Layer of Plastic Sheet one Layer of

'U' From Sheet Leving Space on Wall For Expansion Joint, Fixing

Transporting Cleaning, Wastage, etc. Complete.

Supply & fixing of GVT Type Digital Vitrified Tiles Size of 0.8x1.6 m (1st

43 Quality) for Floor Base of Cement:Mortar in proportion of 1:3 and 982.00 Sqm 1298.00 1310.98

Spread Cement Slurry on Bed as per EIC.

Supply & Fixing of GVT Type Digital Vitrified Tiles Size of 0.8 X 1.6 m

44 (1st Quality) in Chemical on wall after 12mm rough plaster in 60.00 Sqm 1653.00 1669.53

proportion of 1:3 as per EIC.

Supply & fixing of GVT Type Digital Vitrified Tiles Size of 0.6x1.2 m (1st

45 Quality) for Floor Base of Cement:Mortar in proportion of 1:3 and 122.00 Sqm 1178.00 1189.78

Spread Cement Slurry on Bed as per EIC.

Supply & Fixing of GVT Type Digital Vitrified Tiles Size of 0.6 X 1.2 m

46 (1st Quality) in Chemical on wall after 12mm rough plaster in 586.00 Sqm 1235.00 1247.35

proportion of 1:3 as per EIC.

Grouting the joints of flooring tiles having joints of 3 mm width, using

epoxy grout mix of 0.70 kg of organic coated filler of desired shade

47 (0.10 kg of hardener and 0.20 kg of resin per kg), including filling / 2115.00 Sqm 1057.00 1067.57

grouting and finishing complete as per direction of Engineer-in-charge

P & L 24" x 24" vitrified 8 mm thick tile flooring over 20 mm (average)

base of cement mortar 1:6 ( 1 cement: 6 coarse sand) on new surface

or fixing on existing flooring by adhesive material including

dismentaling of existing flooring and jointed with color cement slurry

including finised with flush pointing & cleaning the surface etc.

complete for light shade

Providing and laying Vitrified tiles 8 to 10 mm thick , 24'' x 24'' in

skrting risers of steps and dedo on 10mm thick cement plaster 1:3 (1-

cement : 3-coarse sand) and jointed with white cement slurry

Sr. No. Item Description Quantity Unit Rate Rate With 1% LC Amount in Rs.

Providing and fixing 81/85mm - Maple Wooden flooring System

(Indoor), The system consists of Pine Runner of 33/38mm x 63/68 mm

in length of 1.20 mt., laid at a distance of 310 center to center

WOODEN FLOORING

"ROBBINS"/''ACTION"PRESTIGE/HORNET/CONNERS/ACER - USA

MAPLE 2nd & Better Grade BWF - FIBA & MFMA " Approved" Providing

and Installing 81/85mm - Maple Wooden flooring System. (Indoor) The

system consists of Pine Runner of 33/38mmmx 63/68 mm in length of

3 to 4' , laid at a distance of 310 center to center, each runner would

have " AERO FLOAT" shock cushion pad of 10/19 mm, each pad will be

fixed at the center to center of 330mm on the runner and at the joint

of the runner . Finally Fixing with Cleats / Screws or Staples BWF

accredited Maple Wood Flooring Boards of 20mm, 67 to 85mm of

random length, tongue and grooved for concealed fastening . A Gap of

a minimum of 1.5mm will be left affter every 5' of the floorboardas a

weeding joint and at the edges, a minimum gap of 18mm will be kept

open for expansion & Construction due to change in the climate

Finally sanding the wooden flooring and application of "Matt Finish"

sports polish which will consist of one coat of Sealer and One Gym

Coat. THE PRODUCT AND SYSTEM WILL BE ACCREDITED AND

CERTIFIED BY BADMINTON WORLD FEDERATION (BWF).

Supply & Installation of INTERNATIONAL TABLE TENNIS FEDERATION

(ITTF) approved PVC Vinayl Table Tennis Court Mate that should be

compliance with the Area with Total Thickness of 7 mm Comprising of

layer. Product Top finish to have E-SUR Clean Shield protective Surface

Layer; Second Layer is three-in-one Structure Surface layer Blended

with fiberglass Mesh Cloth; Third layer is E-SER Rubber foam; Fourth is

E-SER Rubber Bottom Layer. Here E-SUR is Surface treatment

Technology Which Makes the Flooring anti-Dirt, Low Maintenance, Anti-

51 Wear, anti-Scratch and Environmental; & E-SER is Rubber Foam 374.00 Sqm 2444.00 2468.44

Technology Through This the Cross-Linking Process of Rubber and PVC

Do. That Will be Excellent resilience, Weather Resistance, fatigue

Resistance, Improve the Low-temperature Brittleness and poor High

Temperature rebound of PVC. Rubber Bottom Layer Ensure that the

flooring is stable and does not move under of sports and avoids injury.

Mate Could be Install on Cement Concrete Ground Directly

Providing and laying white glazed tiles 6mm thick in flooring treads of

steps and landing laid on a bed of 12mm thick cement mortar 1:3 (1-

cement : 3-coarse sand ) finishing with flush pointing in white cement.

Providing and laying white glazed tiles 6mm thick in skrting risers of

53 steps and dedo on 10mm thick cement plaster 1:3 (1-cement : 3-coarse 5.00 sq m 1116.32 1127.48

sand) and jointed with white cement slurry

Providing and laying 18 mm thick polished granite stone machine cut in

flooring, tread of steps over 20 mm (avg.) thick base of Cement Mortar

1:6 (1 Cement : 6 Coarse sand) and jointed with grey cement slurry with

matching pigment incl. rubbing and polishing half rounding edge etc.

complete colour and shed as approved by architect engineer in charge.

Providing and laying 18 mm thick polished granite stone machine cut in

single piece (Max. available) in Risers of Step, dado, Pillars, Sill and

Jambs of door/window laid over 10 mm thick cement mortar 1 : 3 (1

55 cement : 3 coarse sand) With Chemical and jointed with grey cement 190.00 sq mt 3335.00 3368.35

slurry with matching pigment incl. rubbing and polishing half rounding

edge etc. complete colour and shedas approved by architect engineer

Providing and laying polished Kota stone slab flooring over 20mm

(Average) thick base of cement mortar 1:6 (1-cement : 6-coarse sand)

or L.M. 1.1.5 (1-Lime putty :1.5 - coarse sand) laid over and jointed with

grey cement slurry mixed with pigment to match the shade of slab

including rubbing and polishing etc. complete. (A) 25mm thick

Supply & Fixing of both side Polished Kota Stone of required size &

mm thickness as instructed to fixed in Platform / CupBoard with

cement mortar 1:3 (1 Cement : 3 Sand) etc. as per instructed by

engineer in charge

Sr. No. Item Description Quantity Unit Rate Rate With 1% LC Amount in Rs.

Supply & Fixing of Polished on both sides of Granite Stone in thickness

of 15-20 mm to fix as Urinal Curtain and as per instruction machine cut

should be done on this Granite in all three sides

Providing & constructing of Sandwitch type Platform of 60cm. width

and 80 cm. height with Granite slab (18 to 20mm) on top resting on one

side polished kotah stone 25 mm thick top and 1 nos of 25mm thick

polished kotah stone vertical support fixing by making grooves

59 including 75 mm wide facing patti with external edge of the patti shall 15.00 Rmt. 2347.00 2370.47

be finished with Quarter round molding & mirror polished etc.

completed with cutting hole as per sink size as directed by an architect.

Providing & constructing of Platform of 60cm. width and 80 cm. height

with Granite slab (18 to 20mm) on top resting brick wall and fixing by

making grooves including 75 mm wide facing patti with external edge

of the patti shall be finished with Quarter round molding & mirror

polished etc. completed with cutting hole as per wash basin size as

directed by an architect.

Applying two coats of Birla or Asian acrylic lapy ( putty) & two coats of

primer of approved brand and manufacture on new wall surface to

61 give an even shade including thoroughly brushing the surface free from 6423.00 sq mt 40.19 40.59

mortar dropping and other foreign matter and sand papered smooth.

Wall painting (two coats) with plastic emulsion paint of approved brand

and manufacture on undecorated wall surface to give an even shade

62 including throughly brushing the surface free from mortar droppings 6423.00 sq mt 83.53 84.37

and other foreign matter and sand papered smooth.

Finishing wall with weather proof exterior emulsion paint on wall

surface (two coats) to give an required shape even shade after

thoroughly brushing the surface to remove all dirt, and remains of

loose powdered materials.etc complete

Applying priming coat and Painting two coats on new steel and other

metal surface with enamel paint over after and including preparing the

surface by throughly cleaning, oil,grease, dirt and other foreign matter

and scoured with brushes fine steel wood, scrapers and sand paper

with ready mixed priming paint brushing red lead.

Painting lines, deashes, arrows, letters etc on roads, Air fields and like

in two coats with road marking paint, brushing including cleaning the

surface of all dirt, dust and other foreign matter. (ii) Upto 10 cm in

width as directed by EIC/ consultant.

Providing and fixing factory made uPVC glazed/wire mesh

windows/doors comprising of lead free uPVC multi-chambered frame,

sash and mullion/coupler (where ever required) extruded profiles

having minimum wall thickness of 1.70 mm for Series R1 and R2

profiles and 2.10 mm for Series R3 and R4 profiles conforming to EN:

12608 in any shape, colour and design duly reinforced with galvanized

mild steel section made of required shape & size as per CPWD

Specification, uPVC extruded glazing beads, interlocks and Inline sash

adaptor (where ever required) of appropriate dimension, EPDM gasket,

hardware, SS 304 grade fasteners of minimum 8 mm dia with

countersunk head, comprising of matching polyamide PA6 grade sleeve

for fixing frame to finished wall as per IS 1367 : Part 1 to 14, plastic

packers, plastic caps and necessary stainless steel screws etc. Profile of

frame, sash & mullion (if required) shall be mitred cut and fusion

welded/mechanically jointed duly sealed at all corners, including

drilling of holes for fixing hardware and drainage of water etc. After

fixing frame the gap between frame and adjacent finished wall shall be

filled with weather proof silicon sealant over backer rod of approved

size and quality, all complete as per approved drawing conforming to

CPWD specification & direction of Engineer-in-Charge. Section of steel

reinforcement and cross sections of uPVC profiles to be as per design

approved by Engineer-in-Charge. Wire mesh / Glazing of plain/

Sr. No. Item Description Quantity Unit Rate Rate With 1% LC Amount in Rs.

Providing and fixing factory made uPVC glazed/wire mesh

windows/doors comprising of lead free uPVC multi-chambered frame,

sash and mullion/coupler (where ever required) extruded profiles

having minimum wall thickness of 1.70 mm for Series R1 and R2

profiles and 2.10 mm for Series R3 and R4 profiles conforming to EN:

12608 in any shape, colour and design duly reinforced with galvanized

mild steel section made of required shape & size as per CPWD

Specification, uPVC extruded glazing beads, interlocks and Inline sash

adaptor (where ever required) of appropriate dimension, EPDM gasket,

hardware, SS 304 grade fasteners of minimum 8 mm dia with

countersunk head, comprising of matching polyamide PA6 grade sleeve

for fixing frame to finished wall as per IS 1367 : Part 1 to 14, plastic

packers, plastic caps and necessary stainless steel screws etc. Profile of

frame, sash & mullion (if required) shall be mitred cut and fusion

welded/mechanically jointed duly sealed at all corners, including

drilling of holes for fixing hardware and drainage of water etc. After

fixing frame the gap between frame and adjacent finished wall shall be

filled with weather proof silicon sealant over backer rod of approved

size and quality, all complete as per approved drawing conforming to

CPWD specification & direction of Engineer-in-Charge. Section of steel

reinforcement and cross sections of uPVC profiles to be as per design

approved by Engineer-in-Charge. Wire mesh / Glazing of plain/

Supply & Fixing of 24 mm thick WPC Decorative Door with one side

plain and one side CNC Cut Design including cost of all necessary fitting,

as per instruction of PMC/ Engineer in charge etc complete.

Providing and fixing IS marked Flush Door 35mm thk. wooden beading

of ghana wood and size 35x6 mm, including both side Laminated sheet

of decorative type with high density protective surface and riverce side

adhesive bonding quality and 1 mm thickness and laminated of beading

area with same laminate, including approved brand of stainless steel

fixtures like two nos Stopper , two nos Handle of S.S. Pipe Handle for

door 30 Cm size of ASIS 316 Grade , and approved brand of latch lock

with ss butt hinge of approved quality and ss screw etc complete. (35

mm thickness excluding lamination thickness)

Providing and fixing IS marked 15mm thk. Plywood with Single side

Laminated sheet of decorative type with high density protective surface

70 and riverce side adhesive bonding quality and 1 mm thickness including 151.00 Sq mt 2000.00 2020.00

making groove for lock and stopper including all for Door Frame of

Providing and fixing M.S. grills of required pattern to wooden frames of

windows etc. with M.S. flats at required spacings and frame alround,

square or round bars with round headed bolts and nuts or by screws

(A) Plain Grill.

Supply & Fixing of Stair Hand Railing S.S. Pipe 50mm Dia. Only Single

72 Pipe With fiting comp. as directed by EIC/ consultant. 96.00 R mt 1004.24 1014.28

Providing & fixing S.S Railing work 304 Grade of 50 mm dia at Top run

with 40 mm X 40 mm vertical Squre pipe and 3 Nos 15 mm dia

Horizontal Pipe with all necessary fittings etc. complete as per

Architect/ Site engineer's instructions.

Steel work, riveted in built up sections framed work including cutting,

hoisting, fixing in position and applying a priming coat of red lead paint.

(A) In beams and joists, channels angles Tees, flats, with connecting

plates or angle cleats as in main and cross beams. Hip and jack rafters,

purlins conneted to common rafters and the like.

Providing corrugated G.I. sheet of class-3 roofing fixed with glavanished

iron J or L Hooks, Bolts and nuts 8mm diameter with bitumen and G.I.

75 limpet washer or G.I. limpet washer. filled with white lead complete 28.00 Sq.mt. 726.92 734.19

excluding the cost of purlins, Rafters and Trusses.(1) 0.80 mm thick

Supply & laying HDPE 80 is 1.2mm thick high densiy polythylene

membraneia a multilayer composite waterproofing material with

superior Performance including a layer of high performance PE film.

Technical parameter- 1.2mm thick HDPE 80 sheet, Elogation- >500%,

tensile strength- >25MPA, Resistance to hydrostatic head-70m,

Pancture resistance- 1000N(+/-5%)

Sr. No. Item Description Quantity Unit Rate Rate With 1% LC Amount in Rs.

Water Proofing Treatment on Terrace and Wall sides with smooth

77 finishing including material-labour etc. complete 476.00 SqMt 121.00 122.21

Providing and laying broken china mosaic flooring for terrace

using 12 mm to 20 mm broken pieces of glazed tiles to be laid over

cement mortar 1:3 to plain or slope and to be tempered to bring

78 mortar creme out upto surface using white cement including 476.00 sq mt 771.98 779.70

rounding off junctions and extending them upto 15 cm along the

wall,clearing with water and oxalic acid etc. as directed.

Roller Blinds Providing and Fixing Impulse Blackout Roller Blinds with

fabric of 0.53mm thickness and Top channel of non-rusting aluminium

alloy with 1.25mm thickness and bottom channel of 1.50mm thickness

& 21mm diameter. Tilt channel of ABS plastic with 1.50mm polyster

cord with 4.50mm balls with stop lock arrangement including all

necessary fixture, fastners, fittings, labour material machinary etc

complete as seletced and diretced by Engineer Incharge.

Construction of granular sub-base by providing close graded material,

spreading in uniform layers with motor grader on prepared surface,

80 mixing by mix in place method with rotavator at OMC and compacting 195.00 CuMt 688.00 694.88

with vibratory roller to achieve the desired density complete

construction of concrete road using tremix system with 20CM thick M-

25 concrete mixing complast P 211 water reduction concrete admixture

@ 100 M.L. per bag of cement with providing adn fixing and removing

of "C" Channel having size 75 mm X 75 mm as per required level slop

and thickness of concrete road floor leveling of placed concrete with

surface vibrator finishing the surface with power floater and trowel

81 light brooming on the surface as directed with proving expansion joint 65.00 CuMt 6097.00 6157.97

size 20X125 mm and filling the expansion joint having size 20 mm

X20mm by using colpar 200 as per manufacturer specification with

making of construction joint by cutting of joint of size 3mm X20mm by

using of concrete cutter machine including curing etc. complete

Supply & Fixing of 3mm Aluminium Composite Panel work with Pipe

82 Framing work including cost of all necessary fitting, as per instruction of 104.00 SqMt 2953.00 2982.53

PMC/ Engineer in charge etc complete.

Supply & Fixing of 3mm Wooden Aluminium Composite Panel work

with Pipe Framing work including cost of all necessary fitting, as per

instruction of PMC/ Engineer in charge etc complete.

Providing and Fixing dry cladding upto 10 meter height with 30mm

thick gang saw cut stone with machine cut edges of uniform colour and

size upto 1mx1m, fixed to structural steel frame work and/or with the

help of cramps, pins etc. and sealing the joints with approved weather

84 sealant as per Architectural drawing and direction of Engineer in 774.00 SqMt 4902.65 4951.68

charge.(The steel frame work, stainless steel cramps and pins etc. shall

be paid for separately) (i) Red sand Stone -30 mm thick gang saw cut

Supplying and fixing 12mm toughned glass Door (including cost of

necessary fitting, as per instruction of PMC/ Engineer in charge etc

supplying and fixing 12mm toughned glass including cost of necessary

fitting, alluminium frame C type size 32x32mm with anodized coating

and labour etc. complete.

supply & Fixing Coloured Glass Film on toughned Glass with all

complete. (including cost of necessary design as per instruction of

PMC/ Engineer in charge etc)

Supply & Fixing of Solid Modular Paving Stones in “Decastone Design”,

of VYARA or Equivalent make, in 80mm thickness With Premier Shield

Protection after beding of Bhogavo sand in line and CC on the edge in

proportion of 1:2:4 with curing etc. complete. Also Different sizes &

Colour of paving stones is Seclected by EIC.

Sr. No. Item Description Quantity Unit Rate Rate With 1% LC Amount in Rs.

Supply & Fixing of EN type Half Batter Profile Kerbstones of VYARA or

Equivalent make Size LxWxT = 1000x300x150 MM, manufactured on

Vacuum wet Press Machine with hydraulic pressing of wet concrete

89 mixture to a minimum of 400 tons with simultaneous vacuuming, using 43.00 Nos 684.00 690.84

ECO filters with pimple finish including required diggging, Cementing

joints with material and labour.

Supply & Fixing of EN type Half Batter Profile Kerbstones of VYARA or

Equivalent make Size LxWxT = 600x300x150 MM, manufactured on

Vacuum wet Press Machine with hydraulic pressing of wet concrete

90 mixture to a minimum of 400 tons with simultaneous vacuuming, using 43.00 Nos 451.00 455.51

ECO filters with pimple finish including required diggging, Cementing

joints with material and labour.

Providing and placing and position suitable PVC water stops conforming

to IS:12200 for construction/expansion joints between two RCC

91 members and fixed to the reinforcement with binding wire before 502.00 R mt 371.21 374.92

pouring concrete etc complete a) Serrated central bulb(225mm wide, 8-

Labour work for making of holes/Core Cutting in CC of size 15x15 cm

and up to depth of 15cm

93 Supply & Fixing of Steel characters 4320.00 Sq.inch 79.00 79.79

Numbering on Building / Quarters (Painting work) including all material

94 and labour charge 160.00 Character 11.00 11.11

Suppling and Fixing Dobble Glazzed Unit (DGU) Curtain Wall Glazzing

With Naccasarey Alluminium Pipe & Fixchers, Inside 5 mm Clear

Toughned Glass + 12 mm Air Gap Fill With Molecules in alluminiyam

Streeps + Outer Side 5 mm Reflective Toughned Glass (Outer Surface

Coated For Rain Protection - Endura Shield Make) With Required

Alluminiuam Presser Plate & Cover Plate, EPDM Rubber etc. at all

heights including scaffolding as per engineer in Charge.

Suppling and Fixing Accessories For Openabal Window Part in Dobble

96 Glazzed Unit (DGU) Curtain Wall Glazzing as Per Engineer in Charge. 10.00 Nos. 4025.00 4065.25

Providing & Fixing Coloured Coin Rubber Mat for Floor as Per EIC

Providing & Fixing GLASS FIBER REINFORCED CONCRETE (GRC/GFRC)

Product like Plain & Fluted Columns Pillars, Column Top & Base, Motifs-

Torans, Cornices, Screens/Jaalis, Vertical & Horizontal Fins, Domes, Wall

Cladding, Statues & Sculpture, Garden Products, Fountains and other

Custom Moulded Products. Also Provided Texture on Finished Surface

like Stone Finish, Acid Wash, Plain Finish, Metalic Finish and Painted

Finish etc. as per given in Drawings. Which are made with a mixture of

3% Alkali Resistent Glass Fibre (NEG), 50% White Cement, 50% Fine

Aggregates, 0.3% Plasticizers, 3-5% Poilmers, 14% to 16% Water, 3% to

4% Acrylic Polymer and Colour Pigments (If Required) of Approved

Make by EIC/PMC.

99 Cupboard 15.45 Sq mt 8500.00 8585.00

100 Aesthetic Mirror Art 2.22 Sq mt 50000.00 50500.00

102 Interactive Embossed Texts 8.00 Sq mt 1000.00 1010.00

103 Yoga Matti Cupboard 5.00 Sq mt 6500.00 6565.00

Providing laying and jointing in true line and level 15 mm dia. U.P.V.C.

Pipe ( SCH- 40) for cold water including fittings make PRINCE /

SUPREME / ASTRAL / FINOLEX or equivalent as approved by Engineer

In Charge. Pipe shall be fixed on the wall with the help of clamp at

104 every two metre C/C or shall be concelled as directed including 110.00 R mt 71.93 72.65

necessary fittings etc. including testing of pipe and joints and fixing the

same with adhesive solvent, including cost of all materials.

Sr. No. Item Description Quantity Unit Rate Rate With 1% LC Amount in Rs.

Providing laying and jointing in true line and level 25mm dia. U.P.V.C.

Pipe ( SCH- 40) for cold water including fittings make PRINCE /

SUPREME / ASTRAL / FINOLEX or equivalent as approved by Engineer

In Charge. Pipe shall be fixed on the wall with the help of clamp at

every two metre C/C or shall be concelled as directed including

necessary fittings etc. including testing of pipe and joints and fixing the

same with adhesive solvent, including cost of all materials.

Providing laying and jointing in true line and level 32mm dia. U.P.V.C.

Pipe ( SCH- 40) for cold water including fittings make PRINCE /

SUPREME / ASTRAL / FINOLEX or equivalent as approved by Engineer

In Charge. Pipe shall be fixed on the wall with the help of clamp at

every two metre C/C or shall be concelled as directed including

necessary fittings etc. including testing of pipe and joints and fixing the

same with adhesive solvent, including cost of all materials.

Providing laying and jointing in true line and level 40mm dia. U.P.V.C.

Pipe ( SCH- 40) for cold water including fittings make PRINCE /

SUPREME / ASTRAL / FINOLEX or equivalent as approved by Engineer

In Charge. Pipe shall be fixed on the wall with the help of clamp at

every two metre C/C or shall be concelled as directed including

necessary fittings etc. including testing of pipe and joints and fixing the

same with adhesive solvent, including cost of all materials.

Providing laying and jointing in true line and level 50mm dia. U.P.V.C.

Pipe ( SCH- 40) for cold water including fittings make PRINCE /

SUPREME / ASTRAL / FINOLEX or equivalent as approved by Engineer

In Charge. Pipe shall be fixed on the wall with the help of clamp at

every two metre C/C or shall be concelled as directed including

necessary fittings etc. including testing of pipe and joints and fixing the

same with adhesive solvent, including cost of all materials.

Providing, fixing, jointing, testing and commissioning of PVC pipe with

rubber ring joint confirming to IS : 13592, and confirming to IS :

(Pipe Class III - 6 kg / sq.cm) cut to required lengths including all

necessary fittings and specials such as bends, junctions offsets, access

pieces (plain or door). Fixing at wall / ceiling level supported by G.I.

clamps, hangers etc. duly epoxy coated. Cutting, chases/holes in floors

/ walls / slab. The piping should be complete with P or S trap as req.

Providing, fixing, jointing, testing and commissioning of PVC pipe with

rubber ring joint confirming to IS : 13592, and confirming to IS :

(Pipe Class III - 6 kg / sq.cm) cut to required lengths including all

necessary fittings and specials such as bends, junctions offsets, access

pieces (plain or door). Fixing at wall / ceiling level supported by G.I.

110 clamps, hangers etc. duly epoxy coated. Cutting, chases/holes in floors 335.00 R mt 266.00 268.66

/ walls / slab. The piping should be complete with P or S trap as req.

Providing and fixing wash down water closet (European type, W.C. Pan)

with integral P or S trap including jointing the trap with soil pipe in

Cement Mortar 1:1 (1-Cement : 1-fine sand) with plastic seat and cover

for wash down water closer with C.P. brass hinges and rubber buffers.

(A) vitreous China Pattern :(i) in white colour

Providing and fixing Urinal or approved quality including conecting the

Urinal with waste pipe , tap etc. complete.(A) White earthenware flat

back or corner type size 430mm x 260mm x 350mm.

Providing and fixing washbasin with single hole for pillar tap with C.I. or

M.S. brackets painted white including sutting holes and making good

113 the same but excluding fittings.(A) Vitreous China:(ii) Flat Back or 15.00 Nos. 1566.11 1581.77

undercounter washbasin 550 mm x v 400mm size. (i) In white colour.

Sr. No. Item Description Quantity Unit Rate Rate With 1% LC Amount in Rs.

Providing and fixing S S sink 600mmx450mm in Granite corner with

114 mm CP brass bib cock long body with 32 mm CP waste coupling 1.00 Nos. 2275.00 2297.75

Providing and fixing screw down bib taps of following size. (A) Brass

screw down bib tap polished bright. (i) 15mm dia.

Providing and fixing pillar tap, capstan head, screw down high pressure

with screws, shanks and back nuts. (i) 15mm dia.

Providing and fixing chromium plated brass half trun flush cock of

117 approved quality including fixing in pipe line etc. complete.(i) 20mm 20.00 Nos. 252.26 254.78

Providing and fixing 12.5 Litres high level C..I. flushing cistern with A

pair of C.I. or Mild steel brackets, womplete with fittings such as

syplionic arrangement, 15mm nominal size brass ball valve with

118 polythene float, lever G.I. China (60 cm. ) and pull union and couplings 20.00 Nos. 1564.63 1580.28

for connections with inlet, outlet and overflow pipes etc. including

cutting holes in walls and making good the same

Providing and fixing heavy duty Health Fauset with hook with fitting

119 including all as per directed by engineer in charge /Project Architect. 15.00 Nos. 576.27 582.03

Providing and fixing Gun metal check or non-return fullway wheel

valve.(F) 50mm dia.

Providing and fixing Gun metal check or non-return fullway wheel

valve.(D) 32mm dia

Providing and fixing Gun metal check or non-return fullway wheel

valve.(C) 25mm dia

123 suply and fixing 110 mm PVC cowel 8.00 Nos. 500.17 505.17

124 suply and fixing 75 mm PVC cowel 8.00 Nos. 389.15 393.04

Providing SW gully trap CI grating brick masonry chamber and water

125 tight Ci cover with frame of 300mmx300mm size inside with standerd 12.00 Nos. 1234.57 1246.92

weight (B) 150mmx100mm size P or R type

Providing and fixing cast iron (Spun) Nahni trap of the following

nominal diameter of self cleaning design with C.I. screaed down or

higned grating including cost of cutting and making good the walls and

floor 100mm inlet and 50mm outlet.(C) 100mm dia.

Providing erecting and fixing double coated syntex equivalent PVC (ISI)

127 mark water tank of required capacity each with all necessary fittings 10000.00 Nos. 3.91 3.95

and connectionetc comp. on teraace

providing and fixing 600mmx450mm bevelled edge mirror of superior

glass mounted of 0.6 mm thick A C sheet or plywood sheet and fixed to

wooden pluge with CP brass screws and washers

Providing and fixing PTMT liquid soap container 109mm wide, 125mm

high and 112mm distance from wallof standard shape with bracket of

the same material with snap fitting of approved quality and colour

weighing not less than 105 gms.

Providing and fixing C.P. brass towel rail comlete with C.P. brass

130 brackets fixed to wooden plugs with C.P. brass scews.(B) 600mm x 12.00 Nos. 610.32 616.42

Providing and laying (to leve or slope)and jointing with stuff mixture of

cement mortar in proportion 1:1 solt glazed stoneware pipes following

normal diameters incl. testing of pipes and joints complete(B) 150mm

stoneware pipes

Providing and laying (to leve or slope)and jointing with stuff mixture of

cement mortar in proportion 1:1 solt glazed stoneware pipes following

normal diameters incl. testing of pipes and joints complete(B) 100mm

stoneware pipes

Providing and laying Cement concrete 1:5:10 (1-Cement : 5Fine sand

:10-Graded stone aggregate 40mm nominal size) bedding for

133 stoneware pipes of following internal diameters with necessary 50.00 Rmt 211.59 213.71

formwork and curing complete.(B) 150mm dia. (166mm Ave. bed

Providing and laying Cement concrete 1:5:10 (1-Cement : 5Fine sand

:10-Graded stone aggregate 40mm nominal size) bedding for

134 stoneware pipes of following internal diameters with necessary 50.00 R mt 125.90 127.16

formwork and curing complete.(A) 100 mm dia. (112 mm Ave.bed

Sr. No. Item Description Quantity Unit Rate Rate With 1% LC Amount in Rs.

Constructing brick masonry chambrs for underground C I Inspection

Chamber and bends with bricks having crushing strength not less than

35kg/sq cm in C.M. 1:5 C I cover with frame (light duty)455x610mm

internal dimention total weight of cover with frame to be not less than

38kg RCC top slab with CC 1:2:4 mix (1,cement : 2,coarse sand: 4,graded

aggregate 20 mm size) foundation concrete 1:5:10 inside plaster 15mm

thick with C.M. 1:3 finish smooth with finishing coat of neat cement on

walls and bed concrete etc (inside dimentions 500mm x 700mm x &

450mm deep) for single pipe lines with one of two inlets.

Constructing Manhole with R.C.C. top slab in 1:2:4 mix (1-cement :2-

coarse sand : 4-graded stone aggregate 20mm nominal size) foundation

concrete 1:3:6 mix (1-cement : 3- coarse sand :6-Brick bats 40 + 50mm

size) inside plastering 15mm thick with Cement Mortar 1:5 (1-Cement :

5-coarse sand) finished with a floating coat of neat cement and making

channels in cement concrete 1:2:4 mix (1-Cement :2-Coarse sand :4-

stone aggregate 20mm nominal size) finished smooth complete

including curing and festing (i) Inside size 900mm x 1200mm and 1.5M.

deep including C.I. cover with frame size 560mm diameter total weight

of cover and frame to be not less than 128 kgs. (Wt. of cover 64 Kg. and

Wt. of frame 64 Kg.)(A) With 230mm thick walls of brick msonry using

brick having crushing strength not less than 35Kg. / Sq.cm. in

Cement Mortar 1:5 (1- Cement: 5-Coarse sand) (2)B type depth

Metre for 150mm diameter sewer.

RCC precast frame with supply, fitting, fixing with complete as per

specification 10ton size 550/550/90mm.

RCC precast cover with supply, fitting, fixing with complete as per

specification 10ton size 550/550/90mm.

139 Drilling of bore 165mm hole by DTH rig. (a) 0 to 150 mtr. 150.00 R mt 186.12 187.98

140 Drilling of bore 165mm hole by DTH rig. (b)151 to 225 mtr. 225.00 R mt 230.44 232.74

Supplying submersible pump set suitable for bore of 150 mm dia or

more having 3 phase motor capacity not less than 10 HP with following

capacity.[B] 20 stage 210 to 160 LPM discharge at 148 to 173 mtr head

for 50 mm dia delivery pipe Cat.III

Supplying & erecting approved make 3 phase motor control cubical

panel ( Star - Delta) made from16 G. CRCA sheet duly painted with

epoxy powder painted inside and outside with hinged doors and

locking arrangement, consisting of suitable size of ON- OFF isolator (AC -

3/23 duty) main fuses, single phasing preventer cum water level. Guard

(Complete unit), Toggle switch to by pass Single phase preventer cum

WLG, indicating lamps for R- Y- B phases, over load relay, Automatic

water level controller, Ammeter & Voltmeter each with two way

142 selector switch incoming wires duly socket Crimped, Panel to be 1.00 Ea. 14450.00 14594.50

erected on angle iron frame grouted on wall as directed. Star Delta &

main contactor, overload relay, thermal / Electronic Star delta cutoff

timer, start - stop push buttons. The isolator overload relay &

contactors of L& T, Siemens or Cuttler Hamer make only. Panel to be

erected on angle iron frame ground on wall. (b) S/D up to 10 H.P.

Supplying & erecting approved make motor control cubical panel

(Direct - on - line) made from 16 G. CRCA sheet duly epoxy powder

painted inside and outside with hinged doors and locking, arrangement

consisting of suitable size of ON- OFF isolator (AC - 3/23duty) main

fuses, single phasing preventer, indicating lamps for R- Y - B phases,

overload relay, Automatic water level controller, Ammeter, Voltmeter

each with two way selector switch incoming, wires duly socket crimped,

main contactor & overload relay, start - stop push buttons, to be

erected on angle iron frame grouted on wall as directed. The isolator,

overload relay & contactors will be of L & T, Siemens or BCH make only.

(a) DOL up to 5.0 H.P.

Sr. No. Item Description Quantity Unit Rate Rate With 1% LC Amount in Rs.

Providing & erecting open well horizontal mono block pump set with

cast iron body, complete for three phase submersible motor having[D]

144 For 5 HP 3 phase open well horizontal mono block pump set suitable 2.00 Ea. 18561.00 18746.61

for 1350 LPM to 310 LPM @ 10 to 42 Mtr head suitable for 50/65 mm

dia delivery pipe Cat.II

Providing and erecting ISI marked PVC insulated PVC Sheathed Flat

145 flexible Submersible copper cable approved make of following Size. 258.00 R mt 293.00 295.93

(e) 3 Core x 10 Sq. mm.

Providing Water proof straight Joint in PVC insulated flat flexible

146 copper cable by using insulating material, water proofing material, & 5.00 Ea. 188.00 189.88

making the joint complete. (A) Up to 10Sq. mm

Supplying, & erecting C.I. swing, check type non-return (Reflux) Valve -

ISI marked suitable for following size (A) 50 mm dia.

Supplying & erecting Mild Steel heavy duty Flanges with rubber

148 packing and hardware materials for pipe connections suitable for (A) 50 1.00 Ea. 129.00 130.29

Heavy duty clamp made from 4" x 1.5" iron strip suitable for column

pipe 1.5" to 2" length. (B) 50mm(2") dia pipe

Supply & laying of 50mm HDPE Pipe 10 kg/cm2 IS- 4984 mark including

all with necessary Fittings etc.

Supplying, installation, testing and commissioning of Electric driven

Main Fire Pump suitable for automatic operation and consisting of

following, complete in all respects, as required : (a) Horizontal type,

multistage, centrifugal, split casing pump of cast iron body & bronze

impeller with stainless steel shaft, mechanical seal conforming to IS

1520. (b) Suitable HP Squirrel cage induction motor, TEFC,synchronous

speed 1500 RPM, suitable for operation on 415 volts, 3 phase 50 Hz, AC

supply with IP 55 protection for enclosure, horizontal foot mounted

type with Class-'F' insulation, conforming to IS-325. (c) M.S. fabricated

Common base plate, coupling, coupling guard, foundation bolts etc. as

required. (d) Suitable cement concrete foundation duly plastered with

antivibration pads 2280 lpm at 45 m Head

Supplying, installation, testing and commissioning of diesel engine

driven main fire pump suitable for automatic operation and consisting

of following, complete in all respects, as required : (Diesel Driven

Pump) Horizontal type, multistage, centrifugal pump of cast of iron

body and bronze impeller with stainless steel shaft, mechanical seal

conforming to IS 1520. - Suitable HP, 1500 RPM water cooled with

radiator, diesel engine conforming to relevant IS standard complete

with auto starting mechanism, 12 /24 volts electric starting equipment,

diesel tank, exhaust pipe extended upto 10 m outside pump house duly

152 insulated with 50 mm thick glass wool with 1.0 mm thick aluminium 1.00 Nos. 501530.00 506545.30

sheet cladding, residential silencer, instruments and protection as per

standard specification, stop solenoid for auto stop in the event of fault

with audio indications, painted with post office red colour etc. as

required. - M.S fabricated, common base plate, coupling, coupling

guard, foundation bolts etc. as required. Suitable cement concrete

foundation duly plastered and with anti vibration pads. 2280 lpm at

Supplying, installation, testing and commissioning of electric driven

pressurisation pump suitable for autoatic operation and consisting of

following, complete in all respects, as required : (Jockey Pump)

Horizontal type, multistage, centrifugal pump of cast iron body and

bronze impeller with stainless steel shaft, mechanical seal conforming

to IS : 1520. Suitable HP squirell cage induction motor TEFC type

suitable for operation on 415 volts, 3 phase 50 Hz AC supply with IP

class of protection for enclosure, horizontal foot mounted type with

Class-'F' insulation, conforming to IS : 325. M.S.fabricated Common

base plate, coupling, coupling guard, foundation bolts etc. as required.

Suitable cement concrete foundation duly plastered and with anti

vibration pads. 180 lpm at 45 m Head

Sr. No. Item Description Quantity Unit Rate Rate With 1% LC Amount in Rs.

Fabrication, supply, Insallation testing & commissioning of Electrical

control panel of cubical construction, floor mounted type, fabricated

out of 2mm thick CRCA sheet, compartmentalised with hinged lockable

doors, dust and vermin proof, powder coated of approved shade after

7 tank treatment process, cable alley, interconnection with suitable size

copper conductor cable/solid copper strip, having switchgears and

accessories, mountings and internal wiring, earth terminals, numbering

etc. complete in all respect, suitable for main fire pump, pressurisation

pump & diesel pump set complete as per CPWD specification with

following in coming and Outgoings, suitable for operation on 415V,

phase, 50Hz Ac Supply with enclosure protection class IP 42 as required

: Incomings 400A, 50kA 4 Pole MCCB, Ics=100% Icu Rating Digital

Voltmeter 0-500V with selector switch Ammeter (0-400 A) with selector

swtich & CTs etc. LED type RYB phase indicating lamps, ON, OFF, trip

indicating lamps Set of Copper Bus Bar 1000Amps Outgoings ( Note : All

outgoing feeders for pumps should have digital Ammeter with selector

switches, and LED type ON, OFF, trip indicating lamps) Main Fire Pump

250 Amp, 50kA TPN MCCB, Ics=100% Icu, with fully automatic

Star/Delta starter suitable for 25 hp pump with overload protection,

current sensing type single phase preventor complete with all

acceessories and internal wiring required for automatic operation,

selector switch for local/remote, auto/manual/OFF operation. - 1 sets

Providing laying, testing & commissioning of 'C' class heavy duty MS

Pipe conforming to IS 1239/3589 i/c fittings like elbows, tees, flanges,

tapers, nuts bolts, gaskets etc. in ground including welding, excavation

155 & providing cement concrete blocks as supports, anticorrosive 50.00 Mtr 3119.28 3150.47

treatment with coaltar/asphalt tape as per IS 10221, refilling the trench

etc. of following sizes complete as required. 150mm dia.

Providing, laying, testing & commissioning of 'C' class heavy duty MS

pipe conforming to IS 3589/IS 1239 including Welding, fittings like

elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe

156 on the wall/ceiling with suitable clamp/support frame and painting 375.00 Mtr 610.08 616.18

with two or more coats of synthetic enamel paint of required shade

complete as required : 25 mm dia

Providing, laying, testing & commissioning of 'C' class heavy duty MS

pipe conforming to IS 3589/IS 1239 including Welding, fittings like

elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe

157 on the wall/ceiling with suitable clamp/support frame and painting 125.00 Mtr 1050.42 1060.92

with two or more coats of synthetic enamel paint of required shade

complete as required : 50 mm dia

Providing, laying, testing & commissioning of 'C' class heavy duty MS

pipe conforming to IS 3589/IS 1239 including Welding, fittings like

elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe

158 on the wall/ceiling with suitable clamp/support frame and painting 50.00 Mtr 1323.48 1336.71

with two or more coats of synthetic enamel paint of required shade

complete as required : 65 mm dia

Providing, laying, testing & commissioning of 'C' class heavy duty MS

pipe conforming to IS 3589/IS 1239 including Welding, fittings like

elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe

159 on the wall/ceiling with suitable clamp/support frame and painting 80.00 Mtr 1545.70 1561.16

with two or more coats of synthetic enamel paint of required shade

complete as required : 80 mm dia

Providing, laying, testing & commissioning of 'C' class heavy duty MS

pipe conforming to IS 3589/IS 1239 including Welding, fittings like

elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe

160 on the wall/ceiling with suitable clamp/support frame and painting 75.00 Mtr 2095.10 2116.05

with two or more coats of synthetic enamel paint of required shade

complete as required : 100 mm dia

Sr. No. Item Description Quantity Unit Rate Rate With 1% LC Amount in Rs.

Providing, laying, testing & commissioning of 'C' class heavy duty MS

pipe conforming to IS 3589/IS 1239 including Welding, fittings like

elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe

161 on the wall/ceiling with suitable clamp/support frame and painting 50.00 Mtr 2930.68 2959.99

with two or more coats of synthetic enamel paint of required shade

complete as required : 150 mm dia

Supplying and fixing single headed internal hydrant valve with

instantaneous Gunmetal coupling of 63 mm dia with cast iron wheel ISI

marked conforming to IS 5290 (Type -A) with blank Gunmetal cap and

chain as required :

Supplying and fixing Single headed external yard hydrant valve with

No. 63 mm dia instantaneous FM Gunmetal coupling and cast iron

wheel, ISI marked, conforming to IS 5290 (type A) with blank Gunmetal

cap and chain as required :

Supplying, fixing, testing and commissioning of butterfly valve of PN

rating with bronze/gunmetal seat duly ISI marked complete with nuts,

bolts, washers, gaskets conforming to IS 13095 of following sizes as

required : 80 mm dia

Supplying, fixing, testing and commissioning of butterfly valve of PN

rating with bronze/gunmetal seat duly ISI marked complete with nuts,

bolts, washers, gaskets conforming to IS 13095 of following sizes as

required : 100 mm dia

Supplying, fixing, testing and commissioning of butterfly valve of PN

rating with bronze/gunmetal seat duly ISI marked complete with nuts,

bolts, washers, gaskets conforming to IS 13095 of following sizes as

required : 150 mm dia

Supplying, fixing, testing & commissioning of double flanged sluice

valve of rating PN 1.6 with non rising spindle, bronze/gun metal seat,

167 ISI marked complete with nuts, bolts, washers, gaskets and conforming 1.00 Nos. 22762.00 22989.62

to IS 780 of following sizes as required : 150 mm dia

Supplying and fixing orifice plate made out of 6 mm thick stainless steel

(Grade 304) with orifice of required size to be fitted between flange &

168 landing valve of external and internal hydrants to reduce pressure at 6.00 Nos. 1083.22 1094.05

the outlet to the level of 3.5 kg/cm2 complete as required

Providing, installation, testing and commissioning of non-return valve

of following sizes confirming to IS: 5312 complete with rubber gasket,

GI bolts, nuts, washers etc.as required : 100 mm dia

Providing, installation, testing and commissioning of stainless steel Y-

strainer fabricated out of 1.6 mm thick stainless steel, Grade 304, sheet

with 3 mm dia holes with stainless steel flange 100 mm dia

Supplying and fixing GUN METAL 63 mm dia, 15 m long RRL hose pipe

171 with 63 mm dia male and female couplings dulybound with GI wire, 12.00 Nos 4265.64 4308.30

rivets etc. conforming to IS 636 (type-A) as required :

Supplying and fixing first-aid Hose Reel 30M long with MS construction

spray painted in post office red, conforming to IS 884 complete with

the following as required. 20 mm nominal internal dia water hose

thermoplastic (Textile reinforced) type -2 as per IS: 1258520 mm

nominal internal dia gun metal globe valve & nozzle.Drum and brackets

for fixing the equipmets on wall.Connections from riser with 25 mm dia

stop gun metal valve & M.S. Pipe and socket.

Supplying & fixing 63 mm dia gun metal short branch pipe with 20 mm

nominal internal diameter size nozzle conforming to IS 903 suitable for

instantaneous connection to interconnect hose pipe coupling as

Supplying and fixing of 4 Way 150mm dia fire brigade connection of

cast iron body with gun metal male instantaneous inlet couplings

complete with cap and chain as reqd. for suitable dia MS pipe

connection conforming to IS 904 as required :

Providing, fixing, testing & commissioning of 15mm dia quartzoid bulb

175 type sprinklers of rating 68 degree centigrade with required accessories 50.00 Nos 428.04 432.32

: Pendent Sprinkler Each

Providing, fixing, testing & commissioning of 15mm dia quartzoid bulb

176 type sprinklers of rating 68 degree centigrade with required accessories 120.00 Nos 505.94 511.00

: Horizontal side wall sprinkler

Sr. No. Item Description Quantity Unit Rate Rate With 1% LC Amount in Rs.

Providing & fixing 100mm dia flow switch in following sizes M.S.pipe

including connection etc as required

Providing, fixing, testing & commissioning of 100 mm dia installation

control valve of cast iron body, brass/bronze working parts comprising

of water motor alarm, bronze seat clapper, clapper arm and

hydraulically driven mechanical gong bell to sound continuous alarm

when the wet riser/sprinkler system activates, pressure gauges,

emergency releases, strainer, pressure switch, cock valve complete with

Supplying, installation, testing & commissioning of sprinkler flexible

pipe (UL Listed) of stainless steel complete with 15 NPT on reducer

thread with maximum working pressure of 175 PSI test pressure of

179 PSI (Burst) with branch line (Inlet) 25mm NPT male thread to sprinkler 10.00 Nos 471.50 476.22

head (Outlet) 15mm NPT female thread with reducer, nipple, 2 side

brackets, center bracket, stockbar of following sizes complete as

required. 1000mm long

Supply Installing Testing & Commissioning of M.S. Hose Box to

accommodate of 30-Mtr. length Hose Pipe & 1-No. of Branch Pipe

with Nozzle, with necessary support and joints.

Supply & Installing of Gas -Co2 Type –4-Kg, Capacity Fire Extinguisher

181 as per IS And ISI - mark , with necessary Fittings etc. complete. 20.00 Nos 9350.00 9443.50

Supply & Installing of ABC Type 6-Kg, Capacity Fire Extinguisher as

182 per IS And ISI - mark with necessary Fittings etc. complete. 20.00 Nos 4565.00 4610.65

Supply, Installing, Testing & Commissioning of Fire Hotter Manual

183 Call Point, & Control Panel Including Ele. Wire etc. Necessary. ON– 6.00 Nos 405.00 409.05

OFF Switch At each floor for pump start And off including pipe

Design, supply & installation of safety signage made of zinc base glow

184 in the dark rigid sheet with high luminous with pasted on 3 mm thick 50.00 Sq.mt 13.00 13.13

on rigid PVC foam sheet. Such as Fire Lift, Fire Point, In Case Of fire,Fire

Supplying, installation, testing & commissioning of heat detector

operating at 54°C/57°C with rate of rise cum fixed tempreature (dual

185 thermistor) type with mounting base complete with all connection etc. 5.00 Nos. 878.22 887.00

Supplying, installation, testing & commissioning of smoke detector with

186 builtin LED and mounting base complete with all connections 100.00 Nos. 945.46 954.91

etc. as required.

Supplying, installation, testing & commissioning fire alarm sounder with

facility to make announcement, mounted in M.S. box (16 SWG) with

187 hinged cover plate & suitable for operation with amplifier i/c line 6.00 Nos. 334.56 337.91

matching transformer etc. complete as required.

Supplying, installation, testing & commissioning of main control and

indicating panel made out of 16 SWG MS sheet to accommodate the

following items duly powder coated in approved colour with louvers for

ventilation, locking arrangement, audio and visual indication for fire

alarm and public address system, monitoring system including

connections, interconnections etc complete as required.

6 zone panel for fire alarm system

100 watt amplifier racks suitable for operation on 230V AC/24V DC

supply conforming to IEC-268-3 complete with all accessories as

required-2 Nos. (one to act as standby)

Talk back master station with LED PTT (press to talk) push button for

operation on 230V AC/24 V DC supply conforming to IEC-268 for

simplex mode of operation/communication suitable for 20 Nos.talk

back unit-1 set.

Annoucement control desk suitable for selection of different zones

selectively and ON ALL CALL switch with visual indication etc.,

Sr. No. Item Description Quantity Unit Rate Rate With 1% LC Amount in Rs.

complete as required- 1 set.

Amplifier change over switch for inter changing amplifier- 1 No.

Monitor panel for loudspeaker complete output selector ON/OFF

switch, fuse visual indications etc. complete as required- 1 No.

Gooseneck microphone with stand and ON/OFF switch -1 No.

Mains ON/OFF switch, fuse indication lamps, DC and AC voltmeters

& ammeters terminal blocks etc. complete as required -1 set.

Battery charger trickle cum boost to take complete load of fire alarm &

PA system complete with all accessories including providing & fixing of

2 nos. 12 volt, 30 AH each sealed maintenance free batteries -1 set.

Supplying & laying of 2x1.5 sqmm fire alarm armoured cable,

600/1000V rated with annealed copper conductor having XLPE

insulation, steel wire armouring & FRLS outer sheath complete as

Point wiring for Light / Bell with 2-1.5 sq.mm & earthwire of 1.5 sq.mm

(Green) both are of ISI marked 1.1 KV grade FRLS PVC insulated

190 multistrand copper wires, in following type of pipe to be erected 159.00 Pt 445.00 449.45

concealed in/ on surface on wall/ceiling complete with 6A Modular

type switch / bell push & accessories and earth continuity of following

type, erected on PVC / Metallic box, single mounting base frame

Point wiring for secondary light point with 2-1.5 sq.mm & earthwire of

1.5 sq.mm (green) both are of ISI marked 1.1 KV grade FRLS PVC

191 insulated multistrand copper wires, in following type of pipe to be 159.00 Pt 131.00 132.31

erected concealed in / flushed on wall/ceiling, complete with earth

continuity and necessary connection with primary light with accessories

Point wiring for FAN with 2-1.5 sq.mm & earthwire of 1.5 sq.mm

(Green) both are of .ISI marked 1.1 KV Grade FRLS PVC insulated

multistrand copper wires, in following type of pipe to be erected

192 concealed in / flushed on wall/ceiling complete with 6A Modular type 109.00 Pt 632.00 638.32

switch and hum free EME four or more step type electronic fan

regulator with separately mounted and accessories with earth

continuity of following type erected on PVC / Metallic box, single

Point wiring for Two Way Controlled Light Point with 2-1.5 sq.mm &

earth wire of 1.5 sq.mm (green) both are of .ISI marked 1.1 KV grade

193 FRLS PVC insulated multi strand copper wires erected in below type of 15.00 Pt 562.00 567.62

pipe with 6A Modular type switches and following type of accessories

erected on PVC / Metallic/Wooden box, single mounting base frame

covered with textured / metallic/white front plate modules erected on

Point wiring for Individual Plug with & earthwire of 1.5 sq.mm (Green)

both are of ISI marked 1.1 KV grade FRLS PVC insulated multistrand

copper wires, in following type of to be erected concealed in / on

surface of wall / ceiling complete with Modular type switch & 5 pin Plug

194 erected on PVC / Metallic box covered with appropriate front plate 67.00 Nos 471.00 475.71

modules erected on / in wall / ceiling as per pipe erected with

following type of accessories. [I] For 6A Plug with 2-1.5 sq.mm Cu. Wire

(a) with medium class Rigid PVC pipe and accessories Cat. III

[II] For 6/16A Plug with 16A Switch & 2-2.5 sq.mm Cu. Wire (a) with

medium class Rigid PVC pipe and accessories Cat. III

Point wiring for Looped Plug with 6A Modular type switch & 5 pin

196 socket erected on PVC / Metallic box, single mounting base frame 44.00 Nos. 255.00 257.55

covered with textured / metallic front plate modules erected on / in

wall / ceiling with following type accessories Cat. III

(22) 16/20/25 Amp. Modular Starter for Motor / A.C. Unit Complete -

198 (7) Blank Plate Single CAT iii 515.00 Nos. 25.00 25.25

199 (19) Modular Indicating Call Bell Cat.III 10.00 Nos. 326.00 329.26

Supplying & erecting approved make LAN cable of following size in

existing pipe as per direction [C] CAT -

Sr. No. Item Description Quantity Unit Rate Rate With 1% LC Amount in Rs.

Providing and erecting ISI mark Medium class RIGID PVC PIPES of

following size complete to be erected on/in wall or ceiling erected with

201 necessary PVC fittings & Junction boxes fixed with adhesive solution & 2487.00 Mtr. 33.00 33.33

Clamps with following dia of pipes, in approved manner as directed (b)

Providing & erecting PVC Corrugated Flexible Conduit with required

202 nos. of coupling, PVC bushes, Check-nuts etc. complete of following 371.00 Mtr. 21.00 21.21

sizes.(2) 25 mm

Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded

Copper conductor wire in following type of pipe to be erected

203 concealed in /flushed on wall/ceiling, with 1.5 sq. mm copper 1617.00 Mtr. 62.00 62.62

conductor FRLS PVC insulated stranded wire of green colour for earth

continuity of following size (a) with medium class Rigid PVC pipe and

204 accessories (a)sq.

(b) 2 wire 2.5 2 wire

Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded

Copper conductor wire in following type of pipe to be erected in / on

wall / ceiling with 2.5 sq. mm copper conductor FRLS PVC insulated

stranded wire of green colour for earth continuity of following size (a)

wire 6 sq.class

mmRigid PVC pipe and accessories(a) 2 wire 4 sq. mm 247.00 Mtr. 258.00 260.58

Supplying & erecting XLPE(IS:7098)(I)-88 ISI unarmoured copper cable

207 1.1 KV grade to be erected as directed of following size. 58.00 Mtr. 136.00 137.36

(E) 3 core 2.5 Sq. mm

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable

multistrand Copper conductor for 1.1 KV. to be laid on wall with

208 necessary clamps or in existing trench / pipe at road crossing or floor 206.00 Mtr. 269.00 271.69

of following size of cables.

(A) 4 core 2.5 Sq. mm

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable

multistrand Copper conductor for 1.1 KV. to be laid on wall with

necessary clamps or in existing trench / pipe at road crossing or floor

of following size of cables.

Providing & erecting Switch board for Computer or electric apparatus

consisting of following items in single board erected on PVC / Metal

213 board with 3 mm thick PC (Polycarbonate) / Acrylic sheet erected as 2.00 Nos. 1122.00 1133.22

directed 1 no. 6A/16A universal plug-switch combined. 4 nos. 6A

Supplying and6A 5 pin Plug

erecting LED [B] For Modular

fittings with Accessories

of wattage 0.2III

Watt to 0.5 Watt assembled on single MCPCB, with housing used as a

heat sink shall be made of thick sheet Steel conforming to IS:

513/CRCA/ aluminium die cast powder coated and high U.V. &

corrosion resistance with diffuser with company mark/name 160V to

270V, Power Factor more than 0.95, THD < 15%,

CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt ,LED

LED driver efficiency > 85 %

( fitting required LM-79 & LM-80 Certificates)(NOTE: Below description

Supplying and erecting led lamps with following wattage capacity of

220 to 240 voltage, minimum 15000 Supplying and erecting LED indoor

fittings with LEDs of wattage 0.2 Watt to 0.5 Watt assembled on single

MCPCB, with housing used as a heat sink shall be made of thick sheet

Steel conforming to IS: 513/CRCA/aluminium pressure die cast powder

coated and high U.V. & corrosion resistance with diffuser housed in

aluminium casted body with company mark/name

160V to 270V,Power Factor more than 0.95, THD < 15 %,

CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt

LED driver efficiency > 85 %

( fitting required LM-79 & LM-80 Certificates)(NOTE: Below description

have shown ranges of Wattage capacity of LED fittings.The Engineer

Sr. No. Item Description Quantity Unit Rate Rate With 1% LC Amount in Rs.

Supplying and erecting LED indoor fittings with LEDs of wattage

Watt to 0.5 Watt assembled on single MCPCB, with housing used as a

heat sink shall be made of thick sheet Steel conforming to IS:

513/CRCA/aluminium pressure die cast powder coated and high U.V. &

corrosion resistance with diffuser housed in aluminium casted body

216 with company mark/name 84.00 Nos. 462.00 466.62

160V to 270V,Power Factor more than 0.95, THD < 15 %,

CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt

LED driver efficiency > 85 %

( fitting required LM-79 & LM-80 Certificates)(NOTE: Below description

(F) Spot Lightranges of Wattage

425 Lumens, capacity(i)of3LED

Surge-2KV to 7fittings.The

Watts Cat-IIIEngineer 31.00 Nos. 805.00 813.05

(D) LED Strip Light (i) Minimum 4.8W-120 LED per meter (2 wire, IP-65)

with non integral suitable Driver complete Cat-III

(D) LED Strip Light (ii) Minimum 7.2W -240 LED per meter,(2 wire, IP-

65) with non integral suitable Driver complete Cat-III

Supplying and erecting LED street light / Flood light fittings with High

power White LEDs wattage of 3 Watt and above assembled on single

MCPCB, efficiency more than 130 lm/w and corrosion free High

pressure die cast aluminum housing with smooth finish powder coated

220 and heat sink extruded aluminium with diffuser and Polycarbonate 2.00 Nos. 6028.00 6088.28

optics/ lenses, with toughened glass with company mark/name

engraved or embossed 160 to 270 V,Power Factor more than 0.95, THD

< 10 %, CCT 3000 K to 5700K,Uniformity ratio >0.45, Luminaire

efficacy> 100 lumens/watt . LED driver efficiency > 85 %.( fittings

required LM-79 & LM-80 certificates)(NOTE: Below description have

Supplying and erecting LED street light / Flood light fittings with High

power White LEDs wattage of 3 Watt and above assembled on single

MCPCB, efficiency more than 130 lm/w and corrosion free High

pressure die cast aluminum housing with smooth finish powder coated

and heat sink extruded aluminium with diffuser and Polycarbonate

221 optics/ lenses, with toughened glass with company mark/name 4.00 Nos. 4052.00 4092.52

engraved or embossed 160 to 270 V,Power Factor more than 0.95, THD

< 10 %, CCT 3000 K to 5700K,Uniformity ratio >0.45, Luminaire

efficacy> 100 lumens/watt . LED driver efficiency > 85 %.( fittings

required LM-79 & LM-80 certificates)(NOTE: Below description have

shown ranges of Wattage capacity of LED fittings.The Engineer incharge

Supplying and erecting LED street light / Flood light fittings with High

power White LEDs wattage of 3 Watt and above assembled on single

MCPCB, efficiency more than 130 lm/w and corrosion free High

pressure die cast aluminum housing with smooth finish powder coated

and heat sink extruded aluminium with diffuser and Polycarbonate

optics/ lenses, with toughened glass with company mark/name

engraved or embossed 160 to 270 V,Power Factor more than 0.95, THD

< 10 %, CCT 3000 K to 5700K,Uniformity ratio >0.45, Luminaire

efficacy> 100 lumens/watt . LED driver efficiency > 85 %.( fittings

required LM-79 & LM-80 certificates)(NOTE: Below description have

Supplying and of Wattage

erecting capacitymake

approved of LED fittings.The

Octagonal poleEngineer incharge

sheet steel. The pole should be made as per IS. and shall be coated

223 with hot dip galvanizing as per IS 2629/2633/4759, suitable suspend 8.00 Nos. 8111.00 8192.11

local wind speed with integral Junction box consist of terminal plate of

min 6mm Hylam sheet, standard profile 35mmX7.5mm Din-Rail for

MCB Mounting, stud type terminal and arrangement for cable

Providing and erecting street light pole bracket comprising main B Class

MS pipe of 4.2 cm/require outside dia. complete with suitable B Class

M.S. sleeve tubing of approx. 45cms.length and suitable for 76.5 mm /

80mm. / require size pole top having sufficient fasteners for fixing the

brackets and having spread of 1 mtr. length with suitable rise as per

site condition & suitable welded stiffener reducer and nipple with

check nut complete painted with one coat of Red oxide / PU base

primer and two coats of Aluminium / PU paint. paint with following nos

Providing M-20 / 1:2:4 cement concrete foundation & 70 % PCC from

bottom including excavation for the pole of size 45 x 45 x 100 cms.

Deep in below ground level with plinth of 45 cms x 45 cms (or 45 cms

225 dia x 45 cms) high upper ground level with necessary curing and 8.00 Nos. 801.00 809.01

finishing in approved manner.( for 6 mtr pole) including (Foundation

bolt IS-1367 4 X 16 Dia. with Washer and Nut- 4 nos)

Sr. No. Item Description Quantity Unit Rate Rate With 1% LC Amount in Rs.

Supplying & erecting approved make IP 55 grade Company fabricated

Timer Panel of following capacity for switch On-Off street lights on

time scheduling basis made from 16G CRCA sheet duly epoxy power

226 painted inside and outside with hinged doors and locking arrangement 1.00 Nos. 16891.00 17059.91

consisting of suitable size of 4 Pole MCB and 4 pole contactor (cat-

III)with Digital time switch, auto manual switch of same make and

suitable input and output Bakelite terminals and with door earthing

approved by Engineer in charge.

Supplying & erecting approved make Digital time switch having lithium

cell 6 years operative and operate battery backup 1 channel day clock

with 14 memory programme, suitable to operate on 240V + 5%, 16A

with, floating contacts Minimum switching setup time 1 minimum &

LCD display. Also comprised permanent ON/OFF switching.

Programming switches & housed in fire proof thermoplastic enclosure

Supply & layingcover erected

of 63mm as required

HDPE with necessary

Pipe 6 kg/cm2 connection

IS- 4984 mark including

all with necessary Fittings etc. complete.

Providing & laying approved make Double walled corrugated pipes

(DWC) of polyethylene(conforming to IS 14930 II )with necessary

229 connecting accessories of same material at required depth in existing 288.00 R mt 62.00 62.62

trench for laying of cable. below ground / road surface for enclosing

230 (C)90 mm outer dia 62.00 R mt 95.00 95.95

Providing and fixing approved make Perforated C type cable tray.

Made from CR sheet steel. The cable tray should be single or double

231 bended as per required and as per IS 2062/1079 and shall be coated 62.00 R mt 616.00 622.16

with hot dip galvanizing as per IS 2629/4759. with coupler plate / Fish

plate and GI hardware like nut - bolt and washers etc. erected on

existing support as per Specification and as per instruction of engineer

Supply, Installation, Testing and Commissioning of suitable sweep, BEE

5 Star rated, Ceiling fan with Brush Less Direct Current (BLDC)

permanent ferrite magnet Motor, class of insulation: B, Rust free

232 nos.Aluminium blades, 2 nos. canopies, shackle kit with earthing 99.00 Nos. 2857.00 2885.57

provision, copper winding, Power factor not < 0.9, Service Value

(CMM/W) minimum 6.85, Air delivery minimum 215 CMM,

RPM,230v (tolerance as per IS : 374-2019), THD < 10%, with remote unit

for Speed Control and all remaining accessories including safety pin,

Supplying and erecting 19 / 20 mm. nominal bore Medium Class M.S.

233 Pipe down rod erected duly painted for fan complete with necessary 148.00 Mtr. 107.00 108.07

24/ O.20, 3 core flexible wire with earthing.

Supplying & erecting fan hook box of 10 mm M.S. round bar bounded

to the RCC bars up to 50mm length each side and pierced through a

Gauge M.S. box / Heavy Duty PVC box complete erected concealed in

Ceiling with necessary finishing.

Providing 2.5mm.thick laminated acrylic sheet to cover the fan hook or

Supplying & erecting approved make low noise decorative exhaust fan

having size 200mm with 1350 RPM with square frame ABS body with

inbuilt lowers & square frame. (Make & Sample shall be approved by

Engineer in charge)

Providing and erecting Sheet Steel powder coated MCB distribution

board - flush / surface mounted fitted with busbar, neutral link, earth

237 bar and DIN rail, confirming to IS 13032 and BS 5486-1986 without MCB 5.00 Nos. 3836.00 3874.36

to house appropriate nos. of MCBs.(The DBs should be used of same

company of MCB to be used)

(A) single phase incoming and horizontal single phase outgoing

(b) sheet steel double door (IP-43) (v) 12 way

Miniature circuit breaker single pole 6A to 32A suitable to operate on

240 V A.C. system and having breaking capacity 10 KA to be erected in

existing box. confirming to IS 8828/1996 with ISI Mark Cat.III

Providing & erecting 240 V MCB double pole switch for motor &

inductive load (C Curve) having 10 KA breaking capacity & confirms to

IS : 8828 in existing box having following capacity (B) 40 Amp.

Providing & erecting 415 V MCB Four Pole for Motor & Inductive Load

241 (C Curve) having 10KA breaking capacity & confirms to IS :8828 in 4.00 Nos. 590.00 595.90

existing box having following capacity 4.00 Nos. 662.00 668.62

242 (b)40 Amp. Cat.III

Providing & erecting 415 V MCB three Pole for Motor & Inductive

244 Load (C Curve) having 10KA breaking capacity & confirms to IS :8828 in 2.00 Nos. 641.00 647.41

existing box having following capacity

245 (b) for 63 Amp. Cat.III 2.00 Nos. 709.00 716.09

Sr. No. Item Description Quantity Unit Rate Rate With 1% LC Amount in Rs.

Approved make ELCBs / RCCBs conforming to IS: 12640 and having

sensitivity of 30 mA and Short Circuit withstand capacity of 6 KA and

suitable for operation on 3 phase and neutral 415V. having

characteristic of quick action & tripping with all advance feature & do

not incorporate any electronic component for following Max. rating

erected as directed.(iii) 63 Amps. FP

Approved make ELCBs / RCCBs conforming to IS: 12640 and having

sensitivity of 30 mA and Short Circuit withstand capacity of 6 KA and

suitable for operation on single phase 240 V. having characteristic of

quick action & tripping with all advance feature & do not incorporate

any electronic component. for following Max. rating erected as

directed (i) 25 Amps.DP Cat. III

Approved make ELCBs / RCCBs conforming to IS: 12640 and having

sensitivity of 30 mA and Short Circuit withstand capacity of 6 KA and

suitable for operation on single phase 240 V. having characteristic of

quick action & tripping with all advance feature & do not incorporate

any electronic component. for following Max. rating erected as

directed (ii) 40 Amps.DP Cat. III

Supply, installation, testing & commissioning of Lightening

Arrestor(Protection Level-I). The unit rate shall also includes supply and

fixing of 5 Mtr. Mast on which arrestor should be mounted. Installation

to be done for down conductor copper 1 Runs of 1CX70 Sq.mm copper

cable from L.A to earthing pit, Lightening strike recorder "LSR" - if

Required. (Route on the external facia of the building shall be got

SITC from thestrike

of Lightening Client/Consultant/PMC

recorder "LSR". prior to installation). 1.00 Nos. 29800.00 30098.00

SITC of 1C X 70 Sq.mm Copper cable including insulator , sadling etc

251 including all necessasy accesaries for Lightening arrestor earthing. 82.00 Mtr. 663.00 669.63

Supplying & erecting earth pit of minimum bore dia.150mm size

approved make Earthing Electrode consisting Pipe-in-Pipe Technology

252 as per IS 3043-1987 made of corrosion free G.I.Pipes having Outer pipe 0.00

dia of 50mm having 80-200 Micron galvanising, Inner pipe dia of 25 mm

having 200-250 Micron

(c) For Electrical galvanising,

Installation coveringconnection terminal

Transformer dia Lightning

Neutrals, of 12mm

arrester Earthing, A.C.Plant & Sensitive Computer System(like

Automation, SCADA) i.e independent Earthing in normal soil.

Length of Pipe : 3.00 mtrs

Back filling Compound :2 nos Bags of 25 Kg.

Providing and erecting required size HOT deep Galvanised iron strip for

253 earthing of H.T. , OCB/ ACB/ Transformer LT panel board, Motors etc. 103.00 Kg 77.00 77.77

using proper clamp. (Any size)

254 Providing and erecting Annealed bare Copper wire 8 to 16 SWG. 36.00 Kg 787.00 794.87

Supplying and erecting Multifunction meter.

255 CT Secondary - Site Selectable 1A / 5A 4.00 Nos. 13984.00 14123.84

Flush Mounting - 96x96mm

Parameter:- V, A, F, PF, kW, kVA, Old energy, On and Run hours, site

Supplying and erecting approved make set of indicator lamps of LED

256 type lamp, lens cover, Bakelite holder complete erected with necessary 19.00 Nos. 43.00 43.43

Providing & erecting L.T. Current Transformer with bar primary 50/5 to

257 1000/5 ratio 15 VA burden erected in existing CRCA box duly secured 12.00 Nos. 272.00 274.72

with insulating materials connected to the meter

Supplying & erecting approved make Four Pole 415V change over

258 switch interior for panel mounting with operating mechanism A.C.23 1.00 Nos. 13221.00 13353.21

duty confirming to IS for (E)250A Cat.III

Approved make Four pole moulded case circuit breaker having

breaking capacity ICU of 35 KA. at 415 V. having Normal current rating

up to 250A.with variable Thermal & magnetic release suitable to work

on A.C.supply 50 c/s. with all internal connections & complete erected

in existing 16 G.M.S.housing ICS=100% of ICU only Cat III

Providing and erecting Approved make Three pole moulded case circuit

breaker having breaking capacity/strength ICU of 35 K.A. at 415 V.

having normal current rating 125A.with Fixed thermal & magnetic

release suitable to work on A.C.supply 50 c/s. with all internal

Approved spreader

Four pole coppercase

moulded & complete erectedhaving

circuit breaker in existing

breaking capacity ICU of 25 KA. at 415 V,having normal current rating

up to 25 A to 100A. with Fixed thermal & magnetic release suitable to

work on A.C. supply 50 c/s. with all internal connections & complete

erected in existing 16 G.M.S. housing. ICS=100% of ICU only Cat III

Sr. No. Item Description Quantity Unit Rate Rate With 1% LC Amount in Rs.

Providing and erecting Approved make Earth fault Relay suitable to

262 mount with inter connection suitable to following size of moulded case 2.00 Nos. 5362.00 5415.62

circuit breaker having CT ratio & MCCB rating as following along with

Providing 220Verecting

AC. withfollowing

all internal connections

additional parts &

forcomplete erected in

(A)Extended operating rotary handle with pad lock with three position

trip,off,on suitable for 25A to 250 A panel mounting cat-III

Supplying and erecting triple pole & neutral 440V / 500V panel

mounting Copper Busbars with four equal Nos. of electrolyte bus

having current density not more than 1.6 Amp. / sq.mm (Rated current

/ cross section area) duly wrapped with colour insulating tape for phase

264 sequence of following current carrying capacity, erected with necessary 9.00 Mtr. 4861.00 4909.61

bus bar supports /insulators, main cable socket to each bar, erected in

existing cubical panel with necessary connections.

(C) Suitable for 300 Amp. capacity

Supplying and erecting triple pole & neutral 440V / 500V panel

mounting Copper Busbars with four equal Nos. of electrolyte bus

having current density not more than 1.6 Amp. / sq.mm (Rated current

/ cross section area) duly wrapped with colour insulating tape for phase

265 sequence of following current carrying capacity, erected with necessary 8.00 Mtr. 1942.00 1961.42

bus bar supports /insulators, main cable socket to each bar, erected in

existing cubical panel with necessary connections.

(A) Suitable for 100 Amp. capacity

Providing & erecting weather proof, dust & vermin proof, floor

mounted front operated indoor type cubical panel board having IP-54

protection made from 14 SWG thick CRC M.S. sheet for outer body &

doors, 16 SWG thick CRC M.S.sheet for internal partitions with

necessary supporting angles, flats including cutting, bending, drilling,

welding, riveting with internal partitions & cable alley as per

requirements & instruction of engineer-in-charge with erection of

supplied switch gears, BUSBARS, with suitable size of inter connecting

PVC copper wire / copper-aluminium strips, rubber grommets, rib,

bakelite control fuses for measuring instruments, earth bus & earth

bolts, foundation flange - bolts-base Plates, sufficient nos. of hinged 0.00

doors, handles with locking arrangement and rubber gasket complete.

The Panel shall be painted with epoxy powder coating.

(The rates excludes the cost of switchgears, bus bars, inter connecting

mains & Copper Aluminium strips, meters, Fuses etc. The dimension 0.00

shall be measured excluding base beams) The panel shall be supplied

(A) The standard companies switch gear shall be used and only

manufacturers at CPRI approved factory and shall be certified by that 7.00 SqMt 14755.00 14902.55

company whose switch gears are used after fabrication for beneficial

Mains with ISI marked, 1.5KV grade electrolyte multi stranded,

annealed copper conductor with heat resistant PVC insulated conforms

to IS 694, IEC - 227 erected in existing pipe of following size

267 (Specifically for control panel, relays, power switchgears, motor starters 103.00 Mtr. 12.00 12.12

& control wiring) with required size of copper lugs, nuts and bolts if

required.(a) One wire 1.00 sq. mm

269 (b) One wire 6 sq. mm 66.00 Mtr. 56.00 56.56

Supplying & erecting bank of all polypropylene condenser (APP type)

with standard capacity of 2,3,5,7, 10,12.5 & 15 KVAR units of P.F.

correction for operation on 3 phase 50 c/s, 400 /440V (+ / - 10%) with

272 externally discharging resistance, earthing terminal & built on angle 62.00 Kvar 690.00 696.90

iron of channel iron frame work and provided with terminal cover box.

Complete erected on provided iron bracket or on floor duly tested by

Providing and erecting metallic / VITRIFIED danger notice board for

273 MEDIUM VOLTAGE installation to be erected as per IS. The board 2.00 Nos. 69.00 69.69

should be 150X150mm

Sr. No. Item Description Quantity Unit Rate Rate With 1% LC Amount in Rs.

Supplying & erecting carbon dioxide (CO2) fire extinguisher user of

following capacity with necessary clamps made from 50 x 6 mm M.S.

Flat with nut & bolts grouted in wall complete.[A] For 4.5 Kg Capacity

Providing & erecting water cooler having storage capacity 150 Ltr. &

cooling capacity 150 Ltr.per hour @ an ambient temp of 45˚ C. The

outlet temp. of the water should drop by 15˚C within a hour, The water

cooler should be comprising of hermetically sealed compressor, fan

motor, condensing

Supplying and erectingunit,water

tankcumsurrounded by evaporating,

purifier with ultra violatecoil,

technology. (Aquaguard / waterdoc model or equivalent symphony/

Supplying and erecting, commissioning and testing of Diesel Generating

set confirming to IS: 4722:1968 & BS:5514 having continuous rating,

phase, 415 volts, 50 cycles A.C. supply comprising of a totally enclosed

air/water cooled diesel engine with multi-cylinders developing suitable

277 BHP not less than following capacity at 1500 RPM with 10% overload 0.00

for one hour in 24 hours with standard accessories like fly wheel,

lubricating oil cooler, "A" class governor, heavy duty fuel wheel and

lubricating oil filter, oil bath air filler, lubricating oil pressure gauge, end

exhaust manifold, standard set of tools with adjustable spanners, screw

logged with asbestos rope, save oil trays, exhaust piping of required

length, standard wall/floor mounted fuel with level indicator and piping

and drip proof alternator, self excited, self regulated, screen protected,

with excitation system, capable of delivering the rated system output at

415 volts, 3 phase, 0.8 PF, 50 Hz, 4 wire, running at 1500 RPM,

conforming to IS-4722- 1968 with voltage regulation +/- 5% of rated

voltage from no load to full load. Both the engine and alternator fitted

on a common fabricated steel base plate with antivibration mounting

engine and alternator both connected to each other by flexible

flange coupling and with floor/wall mounted control panel box 1.00 Nos. 1382776.00 1396603.76

comprising of voltmeter ammeter, selector switches, ACB / MCCB /

MCB of adequate capacity, indicator lamps duly wired with HRC fuses.

The alternator & control panel shall be connected with provided

suitable capacity armoured cable and complete with Acoustic enclosure

(canopy) made out of 16 SWG CRCA Sheet, sound absorbing material

Rockwool of 64 density & 100 mm thick conforming to IS:8183 / PU

Foam of 40 Density - at least 40 mm. The resin bonded rockwool

covered from inside the canopy by perforated sheet with 3/4 mm

holes, sound level not more than 75 dB at a distance of 1 mtr, as per

Providing & erecting approved make AMF control panel suitable for

following size of 3 phase, 415 V., 50 cycles, A.C. diesel generating set

complete of scope as detailed below:

1) Power module: A pair of electromechanically interlocked contactors

(for mains & generator) Overload relay for generator contactor

Neutral contactor for mains and generator Power socket for

2) Control and metering module: Line voltage monitor. Generator

voltage monitor Ammeter 3 items attempt start facility. Air circuit

breakers/MCB/MCCB of suitable rating for auto/manual operation.

Auto/manual switch. Emergency stop push buttons. Manual start push

button. frequency meter. Engine hour meter. Two earthing studs.

Providing & erecting approved make ATS panel suitable for following

size of 3 phase, 415 V., 50 cycles, A.C. diesel generating set complete of

scope as detailed below:

1) Power module: Motorised Changeover switch with ATS controller,

279 Auxiliary contactor with NO & NC contacts with Automatic Battery 1.00 Nos. 81357.00 82170.57

Charger, indicating lamps for Generator ON, Mains ON, Load and

suitable control terminals and power terminals with neutral earthing

(F) ATS Panel for 160 KVA 3 phase DG Set

[1] GEAR LESS LIFT DRIVE comprising of High Starting torque Lift

A. C. Permanent Magnet Synchronous motor of proper rating with high

efficiency shall be used.

[2] Micro processor based / PLC, ACVVVF, vector control drive with

280 encoder feedback closed loop system shall be used for lift car and door 0.00

operation which shall be full collective selective operation hall call

demand response, UP/DOWN hall stops, Main, Up/ Down Contactor

with overload and phase reversal relay and safety controls.

[3] Car with M S platform with bracings of adequate size and to sustain

the impact load cabin + passenger with safety factor of fire for steel and

side panels of Stainless steel of sheet of grade 304 duty. Car ceiling will

Sr. No. Item Description Quantity Unit Rate Rate With 1% LC Amount in Rs.

[4] All landing doors must be fire rated for 2 hour shall be fully

automatic centre opening/ telescopic opening made of hairline finish

steel grade of 304 with key holes and infrared curtains with Unlocking

facility from outside

[5] Appropriate battery operated emergency light in the car along with

alarm switch shall be provided. Also, Emergency Light & Fan should

start immediately without any Time Delay as soon as power fails.

[6] Digital scrolling indicator system for up-down arrow along with floor

position indicator shall be provided inside the car and at all floors.

[7] Full height infra red curtain with multiple cross / crossing light 0.00

beams shall be provided.

[8] Automatic Rescue Device (ARD) shall be provided accordingly of

passenger capacity with Manual Rescue Operation ( Manual Cranking

[9] Audio visual indication in the lift car showing over loading shall be

provided such that doors kept open till excess load is removed.

[10] Spring buffers/PU Buffers shall be provided.

[11] Car fan as per passenger capacity with automatic sleep timer shall

[12] Voice annunciator with suitable music shall be provided in lift car.

[13] Self diagnostics system for operational and safety parameters shall

be provided in control panel.

[14] Mechanical over speed governor with governor calibration as per

actual site parameters and submission of calibration certificate

submission, door key holes in the floor doors, fireman switch shall be

[15] Lift machine hoisting arrangement in the lift machine room and

monkey ladder for lift pit should be provided by the lift agency, along

with the other steel structure works, foundations for the machine etc…

[16] In the hoist way fascia plate shall be provided without any extra

[18] where ever

civil/ required

electrical as / for

works if directed by engineer

additional in charge.

and alteration in lift shaft

and machine room related to erection of lift shall be made by lift

agency without any extra cost. (granite/marble fixing around all landing

door openings are not in lift agency’s scope.)

[19] Agency has to provide all working drawings and documents and 0.00

liaison services for obtaining all necessary permission from lift inspector

and other authorities.

[20] acrylic transparent licence/display A4 size holder in lift car

(B) SPECIAL OperatingDESCRIPTION

FEATURES Buttons withOF floor position

LIFTS indicator/buttons

for PREMIUM category 0.00

1. Advanced control system dual 64 bit embedded microprocessor with

CANBUS Serial Communication mode including Regenerative power

efficient operation,on site programming facility, Anti nuisance, Pte-

opening, BMS/RMS with necessary online real time monitoring system

having necessary connectivity for remote monitoring & other suitable

supporting hardware & software devices to fulfil the purpose.

3. CAR Panel should be Scratch resistive SS Moonrock finish / Hair Line

/ Honeycomb for car and all Doors, All landing doors must have fire

rating up to 2 hours and car door must have multi-level crisscross beam

door protection. 0.00

4. To & fro communication system & wiring (i.e. car , control room &

guard room ) and Each elevator are equipped with remote monitoring

8 / 10 Passengers,. Ground plus 4 upper floor with Rated Speed of

(C) With General

Providing PLUS ADDITIONAL

and erecting SPECIAL

Inverter based FEATURES

approved attached

make split air-

conditioning unit consisting of condensing unit with variable speed fan

motor, inverter type hermetically sealed rotary compressor with

accessories etc. duly connected separately erected evaporating unit

and blower motor with its accessories by means of extra supplied

281 proper insulated copper tubing,drain PVC pipes suitable for ( cost 0.00 Nos. 58706.00 59293.06

includes Eco Friendly green gas charging and 15A plug top & Remote

Control & MS Stand) with necessary core cutting.

(C) for 1.7 to 2 ton capacity - Premium Cat.

Sr. No. Item Description Quantity Unit Rate Rate With 1% LC Amount in Rs.

Providing and erecting Inverter based approved make Cassette type

split air-conditioning unit consisting of condensing unit with fan motor,

hermetically sealed scroll/rotary compressor with accessories etc. duly

connected separately erected evaporating unit and blower motor with

its accessories by Eco friendly Green gas charging & Internal copper

wiring & Remote control ( 3 star and above of current year) with

necessary core cutting.

(D) for 4 ton capacity- 1/3Phase

Supplying & erecting dual channel amplifier ,power handling capacity of

180 watt ,four micro phone inputs with independent level control ,built

283 in FM tuner,with preset memories,USB drive & SD card for MP3 2.00 Nos. 11018.00 11128.18

playback ,100v /telephone input with priority and VOX,frequency

response-80 Hz to 18k Hz Philips / /distortion less than 1% @ rated

Supplying and erecting wall mount speaker with rated power of

284 watt/power tapping 30/15/7.5 watt available,opening angle 180 degree 6.00 Nos. 2544.00 2569.44

H * 77 degree V ,sound pressure level 88 dB ,frequency response of

Providing and erecting cordless microphone with UHF Diversity

handheld wireless microphone/caller wireless complete with receiver

and transmitter unit,Cardiod ,polar pattern,dynamic microphone,LCD

display for battery and frequency status and information ,32 preset

channels,with compatible groups of 8 channels,14 hrs.battery

285 life,frequency response 80Hz to 18KHz.,RF sensitivity <1.0 Uv,image 2.00 Nos. 5085.00 5135.85

rejection > 55 dB,dynamic range >95 dB and receiver having

channels,S/N ratio>100 dBA,Dynamic range>95 dB,distortion<1%

[[Approved by Competent Authority i.e. not Below the rank of

Executive Engineer ]

Dumbbells Fixed (Kg)

Weight: Fixed hex dumbbells are available in a wide range of weights,

often from 2.5kg to 50kg or more, with increments like 2.5kg or 5kg.

Material: They are commonly made of steel and coated with rubber

Handle: The handles are typically knurled for a secure grip, and may be

Shape: The hexagonal shape prevents rolling and provides stability.

Dimensions: Lengths vary, but are generally consistent across the

weight range, usually around 12-16 inches, rarely 18+ inches.

Weight Tolerance: A tolerance of +/- 3% of the marked weight is

The quote rate shall be inclusive of all design, & shop drawing and

sample mock of all elements approval from Architect & EIC. The quote

rate shall include all Taxes, duties, statutory obligations and safety code

compliance as per client. Rate shall be inclusive of all required Civil

work / Electrical wokr / fabrication work for fixing only primary strcure

shall be provided as base structre only as per requirement. Mode and

method of measurement shall be in accordance with IS. (Any Floor &

Sr. No. Item Description Quantity Unit Rate Rate With 1% LC Amount in Rs.

Dumbbells Adjustable Rods

Set 28mm Dia-14" L---2 Nos)

Rod Material: Common materials include steel often with a chrome

Rod Length: Typically 12 to16 inches, but can vary.

Rod Diameter: Usually 28mm for standard plates weight Capacity:

Indicates the maximum weight the rods can hold, which can vary

Grip Type: May be knurled for better grip and Crome Plated have for

Plate Compatibility: Specifies whether the set uses standard plates.

Number of Pieces: Indicates the total components in the set (rods,

plates, collars, etc.).

Details of the included weight plates, including size and individual/total

Dimensions and Weight: The physical dimensions and weight of the set,

including the package dimensions.

Weight:Variable Adjustable dumbbells are available in a wide range of

weights, often from 2.5kg to 50kg or more, with increments like 2.5kg

The quote rate shall be inclusive of all design, & shop drawing and

sample mock of all elements approval from Architect & EIC. The quote

Barbells standard :

Shaft Diameter: 1 inch (25.4 mm)

Length: Commonly 6 feet (1.83 meters)

Weight: Varies, but generally lighter than Olympic bars, often between

288 Sleeves: Non-rotating sleeves, designed for standard weight plates with 1.00 Nos 4830.00 4878.30

1-inch center holes

Knurling: Knurling pattern varies, but generally less aggressive than

typically has a 1-inch diameter shaft and is designed for lighter weight

Barbells Olympic :

Shaft Diameter: 2 inches (50 mm) For Plates Holder

Grip Diameter:28 mm for men, 25 mm for women

Length: 7.2 feet (2.2 meters)

Weight: 20 kilograms (44 lbs) for men's bars, 15 kilograms (33 lbs) for

Sleeves: Rotating sleeves, designed for Olympic weight plates with 2-

inch center holes

Knurling: Aggressive knurling for a secure grip, often with grip markings

Good finishing Crome Plated.

Intended Use : Olympic Weight Lifting Power Lifting

The quote rate shall be inclusive of all design, & shop drawing and

sample mock of all elements approval from Architect & EIC. The quote

rate shall include all Taxes, duties, statutory obligations and safety code

compliance as per client. Rate shall be inclusive of all required Civil

work / Electrical wokr / fabrication work for fixing only primary strcure

shall be provided as base structre only as per requirement. Mode and

method of measurement shall be in accordance with IS. (Any Floor &

Weight plates rubber :

Olympic Barbell Rubber Weight Plates with Internal Dia Both 30mm Or

50mm and 3 Holes Hand Grip

(Packed in Pair 2.5kg to 25kg) Set for Weight Lifting, Dumbbell Bars,

Strength Training and Gym

Fitness Workout

The quote rate shall be inclusive of all design, & shop drawing and

290 sample mock of all elements approval from Architect & EIC. The quote 50.00 Per Kg. 138.00 139.38

rate shall include all Taxes, duties, statutory obligations and safety code

compliance as per client. Rate shall be inclusive of all required Civil

work / Electrical wokr / fabrication work for fixing only primary strcure

shall be provided as base structre only as per requirement. Mode and

method of measurement shall be in accordance with IS. (Any Floor &

Sr. No. Item Description Quantity Unit Rate Rate With 1% LC Amount in Rs.

Weight plates iron :

These Olympic Cast Iron Plates are simple, classic, and tough enough to

endure for years. These cast

iron plates range from 1.25Kg up to 25Kg,

The quote rate shall be inclusive of all design, & shop drawing and

sample mock of all elements approval from Architect & EIC. The quote

291 rate shall include all Taxes, duties, statutory obligations and safety code 25.00 Per Kg. 138.00 139.38

compliance as per client. Rate shall be inclusive of all required Civil

work / Electrical wokr / fabrication work for fixing only primary strcure

shall be provided as base structre only as per requirement. Mode and

method of measurement shall be in accordance with IS. (Any Floor &

Material: Cast Iron Molded with vinyl coated

Heavy Weight Kettle bell for Gym, Coated Heavy Weight Kettlebell

Fitness, 2KG, 4KG, 6KG,

Our kettle bell is designed to last with a strong vinyl coat HDPE hard

shell which ensures

good durability and easy clean. Ideal for use indoors or outdoors for

your workout needs

292 The quote rate shall be inclusive of all design, & shop drawing and 20.00 Per Kg. 178.25 180.03

sample mock of all elements approval from Architect & EIC. The quote

rate shall include all Taxes, duties, statutory obligations and safety code

compliance as per client. Rate shall be inclusive of all required Civil

work / Electrical wokr / fabrication work for fixing only primary strcure

shall be provided as base structre only as per requirement. Mode and

method of measurement shall be in accordance with IS. (Any Floor &

EZ CurlBarbell Bar Platea Holder, 48mm dia meter EZ Curl Bar Length-

5ft, 4ft, 3ft for Weight

Lifting, Biceps, triceps, Back/Leg Muscle Group exercise,Chrome Curling

Weight Plates hole ,with 2 Spring Collars

The quote rate shall be inclusive of all design, & shop drawing and

293 sample mock of all elements approval from Architect & EIC. The quote 20.00 Nos 5175.00 5226.75

rate shall include all Taxes, duties, statutory obligations and safety code

compliance as per client. Rate shall be inclusive of all required Civil

work / Electrical wokr / fabrication work for fixing only primary strcure

shall be provided as base structre only as per requirement. Mode and

method of measurement shall be in accordance with IS. (Any Floor &

Olympic Deadlift Steel Hex Trap Bar with Handles Shrug Bar for

Strength Training

Powerlifting Deadlifts Shrugs Squats Includes Spring Two Locks for

Secure Grip, Gym

The quote rate shall be inclusive of all design, & shop drawing and

sample mock of all elements approval from Architect & EIC. The quote 1.00 Nos 7475.00 7549.75

rate shall include all Taxes, duties, statutory obligations and safety code

compliance as per client. Rate shall be inclusive of all required Civil

work / Electrical wokr / fabrication work for fixing only primary strcure

shall be provided as base structre only as per requirement. Mode and

method of measurement shall be in accordance with IS. (Any Floor &

Benches & Racks

Sr. No. Item Description Quantity Unit Rate Rate With 1% LC Amount in Rs.

Flat Bench Olympic

Pipe: 4” x 2” CRCA pipe, 12 Gauge,

Colour Work: High Quality Powder Coating

Seat Work: 18mm Plywood (ISI Mark)

P.U - FOAM – 2” Th High Density

The quote rate shall be inclusive of all design, & shop drawing and sample mock of all

elements approval from Architect & EIC. The quote rate shall include all Taxes, duties,

statutory obligations and safety code compliance as per client. Rate shall be inclusive of all

required Civil work / Electrical wokr / fabrication work for fixing only primary strcure shall

be provided as base structre only as per requirement. Mode and method of measurement

shall be in accordance with IS. (Any Floor & Any Height)

Incline Bench Olympic

Pipe: 4” x 2” CRCA pipe, 12 Gauge,

Colour Work: High Quality Powder Coating

Seat Work: 18mm Plywood (ISI Mark

P.U - FOAM – 2” Th High Density

296 he quote rate shall be inclusive of all design, & shop drawing and sample mock of all 1.00 Nos 22425.00 22649.25

elements approval from Architect & EIC. The quote rate shall include all Taxes, duties,

statutory obligations and safety code compliance as per client. Rate shall be inclusive of all

required Civil work / Electrical wokr / fabrication work for fixing only primary strcure shall

be provided as base structre only as per requirement. Mode and method of measurement

shall be in accordance with IS. (Any Floor & Any Height)

Decline Bench Olympic

Pipe: 4” x 2” CRCA pipe, 12 Gauge,

2” x 2” CRCA Square Pipe Gauge-12

Colour Work: High Quality Powder Coating

Seat Work: 18mm Plywood (ISI Mark)

P.U - FOAM – 2” Th High Density

The quote rate shall be inclusive of all design, & shop drawing and

297 sample mock of all elements approval from Architect & EIC. The quote 1.00 Nos 22425.00 22649.25

rate shall include all Taxes, duties, statutory obligations and safety code

compliance as per client. Rate shall be inclusive of all required Civil

work / Electrical wokr / fabrication work for fixing only primary strcure

shall be provided as base structre only as per requirement. Mode and

method of measurement shall be in accordance with IS. (Any Floor &

Material Pipe :-

(1) 4” x 2” CRCA Square Pipe Gauge-12

(2) 2” x 2” CRCA Square Pipe Gauge-14

(2) Ø2” C R.C A Square Pipe Gauge –14

Pata :- Lesar cutting 6mm Thick.

Hardware :-8mm, 10mm, 12mm, Bolt & Nut –Standard Company

ColourWork:-High Quality Powder Coating

Chrome Work:- High Quality Nickel Chrome Work for plates Holders

Fully enclosed cage design, but withplate storage. Maximum safety for

minimal investment.

Two pull-up bars, one is 1¼-inch in diameter, the other is 1 inches in

The quote rate shall be inclusive of all design, & shop drawing and

sample mock of all elements approval from Architect & EIC. The quote

rate shall include all Taxes, duties, statutory obligations and safety code

compliance as per client. Rate shall be inclusive of all required Civil

work / Electrical wokr / fabrication work for fixing only primary strcure

shall be provided as base structre only as per requirement. Mode and

method of measurement shall be in accordance with IS. (Any Floor &

Sr. No. Item Description Quantity Unit Rate Rate With 1% LC Amount in Rs.

Material Pipe :-

(1) 4” x 2” CRCA Square Pipe Gauge-12

(2) Ø48mm C R.C A Pipe Gauge –12

Pata :- Lesar cutting 6mm Thick.

Hardware :- 8mm, 10mm, 12mm, Bolt & Nut –Standard Company

ColourWork:-High Quality Powder Coating

Chrome Work:- High Quality Nickel Chrome Work for plates Holders

The quote rate shall be inclusive of all design, & shop drawing and

sample mock of all elements approval from Architect & EIC. The quote

rate shall include all Taxes, duties, statutory obligations and safety code

compliance as per client. Rate shall be inclusive of all required Civil

work / Electrical wokr / fabrication work for fixing only primary strcure

shall be provided as base structre only as per requirement. Mode and

method of measurement shall be in accordance with IS. (Any Floor &

Material Pipe:-

(1) 4” x 2” CRCA Square Pipe Gauge-12

(2) Ø48mm C R C A Pipe Gauge –

(3) Cover for counter balance 2mm lesar sheet metal steel cutting

,inside Ø90mm x 165mm

Rods:- Length 7' Ø30mm. Bright Bar with Ø48mm bar holder

Pata :- Lesar cutting 6mm Thick.

Hardware :- 8mm, 10mm, 12mm, Bolt & Nut –Standard Company

Colour Work:- High Quality Powder Coating

Chrome Work:- High Quality Nickel Chrome Work

The quote rate shall be inclusive of all design, & shop drawing and

sample mock of all elements approval from Architect & EIC. The quote

rate shall include all Taxes, duties, statutory obligations and safety code

compliance as per client. Rate shall be inclusive of all required Civil

work / Electrical wokr / fabrication work for fixing only primary strcure

shall be provided as base structre only as per requirement. Mode and

method of measurement shall be in accordance with IS. (Any Floor &

Resistance Machines

Material Pipe:-

(1) 4”x2”CRCASquarePipeGauge -

(2) Ø48mm C R.C A Square Pipe Gauge –10

Handle :- Ø25mm. C R C A Pipe For Handle Gauge –10

Pata :- 100mmx50mmx5mm Thick.

Pata :- Lesar cutting 8 mm Thick.

Hardware :- 8mm, 10mm, 12mm, Bolt & Nut –Standard Company

Colour Work:- High Quality Powder Coating

Chrome Work:- High Quality Nickel Chrome Work

Seat Work: 18mm Plywood (ISI Mark)

P.U - FOAM – 2” Th High Density, Good Quality Rexine

The quote rate shall be inclusive of all design, & shop drawing and

sample mock of all elements approval from Architect & EIC. The quote

rate shall include all Taxes, duties, statutory obligations and safety code

compliance as per client. Rate shall be inclusive of all required Civil

work / Electrical wokr / fabrication work for fixing only primary strcure

shall be provided as base structre only as per requirement. Mode and

method of measurement shall be in accordance with IS. (Any Floor &

Sr. No. Item Description Quantity Unit Rate Rate With 1% LC Amount in Rs.

Material Pipe:-

(1) 4”x2”CRCASquarePipeGauge -

(2) Ø48mm C R.C A Square Pipe Gauge –10

Handle :- Ø25mm. C R C A Pipe For Handle Gauge –10

Pata :- 100mmx50mmx5mm Thick.

Pata :- Lesar cutting 8 mm Thick.

Hardware :- 8mm, 10mm, 12mm, Bolt & Nut –Standard Company

Colour Work:- High Quality Powder Coating

Chrome Work:- High Quality Nickel Chrome Work

Seat Work: 18mm Plywood (ISI Mark) P.U - FOAM – 2” Th High Density,

Good Quality Rexine

The quote rate shall be inclusive of all design, & shop drawing and

sample mock of all elements approval from Architect & EIC. The quote

rate shall include all Taxes, duties, statutory obligations and safety code

compliance as per client. Rate shall be inclusive of all required Civil

work / Electrical wokr / fabrication work for fixing only primary strcure

shall be provided as base structre only as per requirement. Mode and

method of measurement shall be in accordance with IS. (Any Floor &

Material Pipe:-

(1) 4”x2”CRCASquarePipeGauge -

(2) Ø48mm C R.C A Square Pipe Gauge –10

Handle :- Ø25mm. C R C A Pipe For Handle Gauge –10

Pata :- 100mmx50mmx5mm Thick. , Lesar cutting 8 mm Thick.

Rods :- Ø25mm Bright bar, Ø35mm Hardning Rods, Bearing-LM35

Hardware :- 8mm, 10mm, 12mm, Bolt & Nut –Standard Company

Colour Work:- High Quality Powder Coating

Chrome Work:- High Quality Nickel Chrome Work

Seat Work: 18mm Plywood (ISI Mark) P.U - FOAM – 2” Th High Density,

Good Quality Max Loading capacity: 800kg

The quote rate shall be inclusive of all design, & shop drawing and

sample mock of all elements approval from Architect & EIC. The quote

rate shall include all Taxes, duties, statutory obligations and safety code

compliance as per client. Rate shall be inclusive of all required Civil

work / Electrical wokr / fabrication work for fixing only primary strcure

shall be provided as base structre only as per requirement. Mode and

method of measurement shall be in accordance with IS. (Any Floor &

Material Pipe:-

(1) 4”x2”CRCASquarePipeGauge -

(2) Ø48mm C R.C A Square Pipe Gauge –10

Handle :- Ø25mm. C R C A Pipe For Handle Gauge –10

Pata :- 100mmx50mmx5mm Thick.

Pata :- Lesar cutting 8 mm Thick.

Hardware :- 8mm, 10mm, 12mm, Bolt & Nut –Standard Company

Colour Work:- High Quality Powder Coating

Chrome Work:- High Quality Nickel Chrome Work

Seat Work: 18mm Plywood (ISI Mark)

P.U - FOAM – 2” Th High Density, Good Quality Rexine

The quote rate shall be inclusive of all design, & shop drawing and

sample mock of all elements approval from Architect & EIC. The quote

rate shall include all Taxes, duties, statutory obligations and safety code

compliance as per client. Rate shall be inclusive of all required Civil

work / Electrical wokr / fabrication work for fixing only primary strcure

shall be provided as base structre only as per requirement. Mode and

method of measurement shall be in accordance with IS. (Any Floor &

Any Height) (Make : Tuffstuff, Ture, Landice, Turbuster)

Sr. No. Item Description Quantity Unit Rate Rate With 1% LC Amount in Rs.

Material Pipe:-

(1) 4”x2”CRCASquarePipeGauge -

(2) Ø48mm C R.C A Square Pipe Gauge –10

Handle :- Ø25mm. C R C A Pipe For Handle Gauge –10

Pata :- 100mmx50mmx5mm Thick.

Pata :- Lesar cutting 8 mm Thick.

Hardware :- 8mm, 10mm, 12mm, Bolt & Nut –Standard Company

Colour Work:- High Quality Powder Coating

Chrome Work:- High Quality Nickel Chrome Work

Seat Work: 18mm Plywood (ISI Mark)

P.U - FOAM – 2” Th High Density, Good Quality Rexine

The quote rate shall be inclusive of all design, & shop drawing and

sample mock of all elements approval from Architect & EIC. The quote

rate shall include all Taxes, duties, statutory obligations and safety code

compliance as per client. Rate shall be inclusive of all required Civil

work / Electrical wokr / fabrication work for fixing only primary strcure

shall be provided as base structre only as per requirement. Mode and

method of measurement shall be in accordance with IS. (Any Floor &

Leg curl / Leg extension

Material Pipe:-

(1) 4”x2”CRCA SquarePipeGauge-12

(2) 2”x 2” C R C. A Square Pipe Gauge –

(3) Ø1” C R.C A Square Pipe Gauge –12

Rods :- Ø19mm. Induction. Bar For Plates Stack Guide Rod & Centre

Pata :- 100mmx50mmx5mm Thick.

Hardware:-8mm, 10mm, 12mm, Bolt & Nut –Standard Company

Weight Stack :- 5 Kg. each plate 80 kg weight stack

Colour Work :- High Quality Powder Coating

Seat: 18mm Plywood (ISI Mark) , P.U - FOAM – 2” Thick. High Density

Standard Rexine,

Wire Rope – 5.8mm wire rope pvc coated

Chrome Work:- High Quality Nickel Chrome Work

Bearing :- 6205. 6202, 6201 ZZ-Use in Pulley

The quote rate shall be inclusive of all design, & shop drawing and

sample mock of all elements approval from Architect & EIC. The quote

rate shall include all Taxes, duties, statutory obligations and safety code

compliance as per client. Rate shall be inclusive of all required Civil

work / Electrical wokr / fabrication work for fixing only primary strcure

Cable crossover machine

Material Pipe:-

(1) 4”x2”CRCA SquarePipeGauge-12

(2) 2”x 2” C R C. A Square Pipe Gauge –

(3) Ø1” C R.C A Square Pipe Gauge –12

Rods :- Ø19mm. Induction. Bar For Plates Stack Guide Rod & Centre

Pata :- 100mmx50mmx5mm Thick.

Hardware:-8mm, 10mm, 12mm, Bolt & Nut –Standard Company

Weight Stack :- 5 Kg. each plate 80 kgx 2Nos weight stack

Colour Work :- High Quality Powder Coating

Seat: 18mm Plywood (ISI Mark) , P.U - FOAM – 2” Thick. High Density

Standard Rexine,

Wire Rope – 5.8mm wire rope pvc coated

Chrome Work:- High Quality Nickel Chrome Work

Bearing :- 6205. 6202, 6201 ZZ-Use in Pulley

The quote rate shall be inclusive of all design, & shop drawing and

sample mock of all elements approval from Architect & EIC. The quote

rate shall include all Taxes, duties, statutory obligations and safety code

compliance as per client. Rate shall be inclusive of all required Civil

work / Electrical wokr / fabrication work for fixing only primary strcure

Sr. No. Item Description Quantity Unit Rate Rate With 1% LC Amount in Rs.

Pec deck (chest fly)

Material Pipe:-

(1) 4”x2”CRCA SquarePipeGauge-12

(2) 2”x 2” C R C. A Square Pipe Gauge –

(3) Ø1” C R.C A Square Pipe Gauge –12

Rods :- Ø19mm. Induction. Bar For Plates Stack Guide Rod & Centre

Pata :- 100mmx50mmx5mm Thick.

Hardware:-8mm, 10mm, 12mm, Bolt & Nut –Standard Company

Weight Stack :- 5 Kg. each plate 80 kg weight stack

Colour Work :- High Quality Powder Coating

Seat: 18mm Plywood (ISI Mark) , P.U - FOAM – 2” Thick. High Density

Standard Rexine,

Wire Rope – 5.8mm wire rope pvc coated

Chrome Work:- High Quality Nickel Chrome Work

Bearing :- 6205. 6202, 6201 ZZ-Use in Pulley

The quote rate shall be inclusive of all design, & shop drawing and

sample mock of all elements approval from Architect & EIC. The quote

rate shall include all Taxes, duties, statutory obligations and safety code

compliance as per client. Rate shall be inclusive of all required Civil

work / Electrical wokr / fabrication work for fixing only primary strcure

Functional & Bodyweight Training

Material Pipe:-

(1) 4”x2”CRCA SquarePipeGauge-12

(2) 2”x 2” C R C. A Square Pipe Gauge –

(3) Ø1” C R.C A Square Pipe Gauge –12

Pata :- 100mmx50mmx5mm Thick.

Hardware:-8mm, 10mm, 12mm, Bolt & Nut –Standard Company

Colour Work :- High Quality Powder Coating

Seat: 18mm Plywood (ISI Mark) , P.U - FOAM – 2” Thick. High Density

Standard Rexine,

The quote rate shall be inclusive of all design, & shop drawing and

sample mock of all elements approval from Architect & EIC. The quote

rate shall include all Taxes, duties, statutory obligations and safety code

compliance as per client. Rate shall be inclusive of all required Civil

work / Electrical wokr / fabrication work for fixing only primary strcure

shall be provided as base structre only as per requirement. Mode and

method of measurement shall be in accordance with IS. (Any Floor &

Dip station Size :-

Material Pipe:-

(1) 4”x2”CRCA SquarePipeGauge-12

(2) 2”x 2” C R C. A Square Pipe Gauge –

(3) Ø1” C R.C A Square Pipe Gauge –12

Pata :- 100mmx50mmx5mm Thick.

Hardware:-8mm, 10mm, 12mm, Bolt & Nut –Standard Company

Colour Work :- High Quality Powder Coating

Seat: 18mm Plywood (ISI Mark) , P.U - FOAM – 2” Thick. High Density

Standard Rexine,

The quote rate shall be inclusive of all design, & shop drawing and

sample mock of all elements approval from Architect & EIC. The quote

rate shall include all Taxes, duties, statutory obligations and safety code

compliance as per client. Rate shall be inclusive of all required Civil

work / Electrical wokr / fabrication work for fixing only primary strcure

shall be provided as base structre only as per requirement. Mode and

method of measurement shall be in accordance with IS. (Any Floor &

Sr. No. Item Description Quantity Unit Rate Rate With 1% LC Amount in Rs.

TRX suspension trainer

Colour Military Color-PRO-Trainer Kit

Item Weight 850 Grams

Style Exercise,Strap

311 The quote rate shall be inclusive of all design, & shop drawing and sample mock of all 1.00 Nos 5175.00 5226.75

elements approval from Architect & EIC. The quote rate shall include all Taxes, duties,

statutory obligations and safety code compliance as per client. Rate shall be inclusive of all

required Civil work / Electrical wokr / fabrication work for fixing only primary strcure shall

be provided as base structre only as per requirement. Mode and method of measurement

shall be in accordance with IS. (Any Floor & Any Height)

Resistance bands / Tubes

Item Weight 100 Grams

Sport Exercise and Fitness

ESISTANCE: 15 to 30 LBS (Only for Beginners) They are lightweight, easy to carry and great

for home, gym and travel

QUALITY MATERIAL: The exercise resistance ropes are made from 100% free of

312 Latex,highest quality rubber 1.00 Nos 920.00 929.20

and TPR Foam for maximum strength and resistance.

The quote rate shall be inclusive of all design, & shop drawing and sample mock of all

elements approval from Architect & EIC. The quote rate shall include all Taxes, duties,

statutory obligations and safety code compliance as per client. Rate shall be inclusive of all

required Civil work / Electrical wokr / fabrication work for fixing only primary strcure shall

be provided as base structre only as per requirement. Mode and method of measurement

shall be in accordance with IS. (Any Floor & Any Height)

Medicine balls / Slam balls -

Popular in Cross Training/HIIT workouts

- Slams are full body movements great for conditioning

- Dead bounce so you won't get a big rebound

- Won't loose their shape or crack under repeated slams

The quote rate shall be inclusive of all design, & shop drawing and

sample mock of all elements approval from Architect & EIC. The quote

rate shall include all Taxes, duties, statutory obligations and safety code

compliance as per client. Rate shall be inclusive of all required Civil

work / Electrical wokr / fabrication work for fixing only primary strcure

shall be provided as base structre only as per requirement. Mode and

method of measurement shall be in accordance with IS. (Any Floor &

PROIRON 9M /12M Battle Ropes, Battling Rope for Fitness Training

Gym, Heavy Exercise

Ropes 38mm, Undulation Rope for Strength Workout (12M)

The quote rate shall be inclusive of all design, & shop drawing and

sample mock of all elements approval from Architect & EIC. The quote

rate shall include all Taxes, duties, statutory obligations and safety code

compliance as per client. Rate shall be inclusive of all required Civil

work / Electrical wokr / fabrication work for fixing only primary strcure

shall be provided as base structre only as per requirement. Mode and

method of measurement shall be in accordance with IS. (Any Floor &

Sr. No. Item Description Quantity Unit Rate Rate With 1% LC Amount in Rs.

The perfect addition to all home & commercial gyms, a plyo box can be

used for explosive

training to improve your power & speed. Each jump box features an

anti-slip PVC cover &

shock absorbent inner foam to reduce impact on the body. Available

individually or as a

set of 4 boxes.

315 The quote rate shall be inclusive of all design, & shop drawing and 1.00 Nos 14375.00 14518.75

sample mock of all elements approval from Architect & EIC. The quote

rate shall include all Taxes, duties, statutory obligations and safety code

compliance as per client. Rate shall be inclusive of all required Civil

work / Electrical wokr / fabrication work for fixing only primary strcure

shall be provided as base structre only as per requirement. Mode and

method of measurement shall be in accordance with IS. (Any Floor &

Fitness Bag PVC Gym Weight Lifting Power Core and Strength Training

Crossfit Training Adjustable

Weighted Sandbag Power Bag

The quote rate shall be inclusive of all design, & shop drawing and

sample mock of all elements approval from Architect & EIC. The quote

316 rate shall include all Taxes, duties, statutory obligations and safety code 1.00 KG 632.50 638.83

compliance as per client. Rate shall be inclusive of all required Civil

work / Electrical wokr / fabrication work for fixing only primary strcure

shall be provided as base structre only as per requirement. Mode and

method of measurement shall be in accordance with IS. (Any Floor &

Cardio Equipment

AC Driven System

4.0 HP continuous (8.0 HP Peak) AC Motor

21ʺ x 64ʺ running surface, Speed 1~20 kmph

Precise incline control from 0%-20%

LED display showing time, speed, distance, incline, calories, heart rate

& matrix running

AI Cushioning Technology deck for excellent shock absorption that

provides suitable push off to

reduce the possibility of any type of injury to knees and joints

Heavy duty 3.0mm reliable orthopaedic running belt

MP3 connectivity with speakers

Maximum User Weight : 180 Kgs

The quote rate shall be inclusive of all design, & shop drawing and

sample mock of all elements approval from Architect & EIC. The quote

rate shall include all Taxes, duties, statutory obligations and safety code

compliance as per client. Rate shall be inclusive of all required Civil

work / Electrical wokr / fabrication work for fixing only primary strcure

shall be provided as base structre only as per requirement. Mode and

method of measurement shall be in accordance with IS. (Any Floor &

Sr. No. Item Description Quantity Unit Rate Rate With 1% LC Amount in Rs.

Stationary Upright Bike

LCD display showing Pulse, Recovery, Time, RPM, Speed, Distance,

Calories, Watt, Heart Rate &

• With self generator system

• With Counter Balance pedals

• 12kgs flywheel

• 16levels tension control system

• Ergonomic seat adjustment

• Counter balance pedals

318 • Adjustable PU seat 1.00 Nos 97750.00 98727.50

• Maximum User Weight: 150kgs

The quote rate shall be inclusive of all design, & shop drawing and

sample mock of all elements approval from Architect & EIC. The quote

rate shall include all Taxes, duties, statutory obligations and safety code

compliance as per client. Rate shall be inclusive of all required Civil

work / Electrical wokr / fabrication work for fixing only primary strcure

shall be provided as base structre only as per requirement. Mode and

method of measurement shall be in accordance with IS. (Any Floor &

LCD display showing Pulse, Recovery, Time, RPM, Speed, Distance,

calories, Watt. Heart Rate & Resistance

• With self generator system

• With Counter Balance pedals

• 12 kgs flywheel

• 16levels tension control system

• Ergonomic seat adjustment

• Counter balance pedals

• Adjustable PU seat

• Maximum User Weight: 150 kgs

The quote rate shall be inclusive of all design, & shop drawing and

sample mock of all elements approval from Architect & EIC. The quote

rate shall include all Taxes, duties, statutory obligations and safety code

compliance as per client. Rate shall be inclusive of all required Civil

work / Electrical wokr / fabrication work for fixing only primary strcure

shall be provided as base structre only as per requirement. Mode and

method of measurement shall be in accordance with IS. (Any Floor &

Sturdy structure with heavy duty crank

Fully adjustable seat

Stuffing : PU foam with synthetic leather

Resistance levels : Variable linear increase

Flywheel Size : 20 kgs

Transport wheels for easy movement

Maximum User Weight : 150 Kgs

The quote rate shall be inclusive of all design, & shop drawing and

sample mock of all elements approval from Architect & EIC. The quote

rate shall include all Taxes, duties, statutory obligations and safety code

compliance as per client. Rate shall be inclusive of all required Civil

work / Electrical wokr / fabrication work for fixing only primary strcure

shall be provided as base structre only as per requirement. Mode and

method of measurement shall be in accordance with IS. (Any Floor &

Sr. No. Item Description Quantity Unit Rate Rate With 1% LC Amount in Rs.

ELLIPTICALS CROSS TRAINER

LED console readouts: incline, time, distance, calories, pulse, speed /

Level Control : 16 resistance levels

14 kgs flywheel

Both forward & reverse mofions offer various workout opfions

Mp3 with speaker

Self Generated system.

Maximum user weight : 180 kg.

The quote rate shall be inclusive of all design, & shop drawing and

sample mock of all elements approval from Architect & EIC. The quote

rate shall include all Taxes, duties, statutory obligations and safety code

compliance as per client. Rate shall be inclusive of all required Civil

work / Electrical wokr / fabrication work for fixing only primary strcure

shall be provided as base structre only as per requirement. Mode and

method of measurement shall be in accordance with IS. (Any Floor &

Heavy Duty Commercial Air Rower .

Solid steel frame.

Air generated 8 levels resistance.

Wide straps are provided to ensure optimal foot placement and

comfortable rowing position.

Transport wheels for easy movement

With LCD monitor that displays all workout data.

High quality cushioned seat.

322 Adjustable footrest with numbere 1.00 Nos 51750.00 52267.50

The quote rate shall be inclusive of all design, & shop drawing and

sample mock of all elements approval from Architect & EIC. The quote

rate shall include all Taxes, duties, statutory obligations and safety code

compliance as per client. Rate shall be inclusive of all required Civil

work / Electrical wokr / fabrication work for fixing only primary strcure

shall be provided as base structre only as per requirement. Mode and

method of measurement shall be in accordance with IS. (Any Floor &

Stair climber / Machine

Size: 1460x820x2080 mm

Machine Weight:190 kgs

Max User Weight : 160 kgs

Stair Squares : 560x235x220 mm Voltage: AC22V±10%.

These machines offer adjustable resistance levels and intuitive controls

for customized workouts.

The quote rate shall be inclusive of all design, & shop drawing and

sample mock of all elements approval from Architect & EIC. The quote

rate shall include all Taxes, duties, statutory obligations and safety code

compliance as per client. Rate shall be inclusive of all required Civil

work / Electrical wokr / fabrication work for fixing only primary strcure

shall be provided as base structre only as per requirement. Mode and

method of measurement shall be in accordance with IS. (Any Floor &

Sr. No. Item Description Quantity Unit Rate Rate With 1% LC Amount in Rs.

Air bike (Assault bike)

Heavy duty steel structure with 25ʺ FAN

LCD monitor showing time, distance, speed, calories, watts, heart rate

& interval settings.

Transmission : Chain + V Belt dry system

4 way quick release seat adjustment

Universal ball joint provides stability & durability for long term

Extra padding on seat for best comfort

Transport wheels

Max. User Weight : 150 Kgs

The quote rate shall be inclusive of all design, & shop drawing and

sample mock of all elements approval from Architect & EIC. The quote

rate shall include all Taxes, duties, statutory obligations and safety code

compliance as per client. Rate shall be inclusive of all required Civil

work / Electrical wokr / fabrication work for fixing only primary strcure

shall be provided as base structre only as per requirement. Mode and

method of measurement shall be in accordance with IS. (Any Floor &

Accessories & Essentials

Dimensions: 1.73 m X 61 cm (Length x Width)

Thickness: 0.6 cm

Wipe with a clean, dry cloth when needed

The quote rate shall be inclusive of all design, & shop drawing and

325 sample mock of all elements approval from Architect & EIC. The quote 60.00 Nos 862.50 871.13

rate shall include all Taxes, duties, statutory obligations and safety code

compliance as per client. Rate shall be inclusive of all required Civil

work / Electrical wokr / fabrication work for fixing only primary strcure

shall be provided as base structre only as per requirement. Mode and

method of measurement shall be in accordance with IS. (Any Floor &

Material Ethylene Vinyl Acetate

Item dimensions L x W x H 33 x 12 x 12 Centimeters

Item Weight 800 Grams 1.00 Nos 1092.50 1103.43

Boldfit Foam Roller, Deep Tissue Massage and Body Pain High Density

Foam Roller for Exercise in

Gym, Home Back Roller for Muscle Recovery Massage Roller

The quote rate shall be inclusive of all design, & shop drawing and

sample mock of all elements approval from Architect & EIC. The quote

Gyms primarily use large, frameless mirrors made from tempered or

laminated glass

Gym mirrors are thicker than standard mirrors, typically 5mm, to

withstand the wear and tear of a gym

Full-Length View:

Gyms often use large, wall-mounted mirrors to allow users to see their

entire body during exercise

Frameless Design:

Frameless mirrors create a seamless look and maximize the reflective

These mirrors are often installed directly on the wall, sometimes with

specialized mounting

hardware to ensure stability.

The quote rate shall be inclusive of all design, & shop drawing and

sample mock of all elements approval from Architect & EIC. The quote

rate shall include all Taxes, duties, statutory obligations and safety code

compliance as per client. Rate shall be inclusive of all required Civil

work / Electrical wokr / fabrication work for fixing only primary strcure

Sr. No. Item Description Quantity Unit Rate Rate With 1% LC Amount in Rs.

Gyms primarily use large, frameless mirrors made from tempered or

laminated glass

Gym mirrors are thicker than standard mirrors, typically 5mm, to

withstand the wear and tear of a gym

Full-Length View:

Gyms often use large, wall-mounted mirrors to allow users to see their

entire body during exercise

Frameless Design:

Frameless mirrors create a seamless look and maximize the reflective

These mirrors are often installed directly on the wall, sometimes with

specialized mounting

hardware to ensure stability.

The quote rate shall be inclusive of all design, & shop drawing and

sample mock of all elements approval from Architect & EIC. The quote

rate shall include all Taxes, duties, statutory obligations and safety code

compliance as per client. Rate shall be inclusive of all required Civil

work / Electrical wokr / fabrication work for fixing only primary strcure

Towels / Wipes Size :

(1) washcloth-13"x 13"

Wipe down surface with a rag soaked in an alcohol-free, mild dish soap

Knurled items only: Scrub using a nylon-bristled brush while soap is on

Wipe down surface with a new rag of just water.

Wipe down surface with a new, dry rag, making sure no excess

moisture is left.

The quote rate shall be inclusive of all design, & shop drawing and

sample mock of all elements approval from Architect & EIC. The quote

rate shall include all Taxes, duties, statutory obligations and safety code

compliance as per client. Rate shall be inclusive of all required Civil

work / Electrical wokr / fabrication work for fixing only primary strcure

shall be provided as base structre only as per requirement. Mode and

method of measurement shall be in accordance with IS. (Any Floor &

Towels / Wipes Size :

(2) washcloth-16"x 28"

Wipe down surface with a rag soaked in an alcohol-free, mild dish soap

Knurled items only: Scrub using a nylon-bristled brush while soap is on

Wipe down surface with a new rag of just water.

Wipe down surface with a new, dry rag, making sure no excess

moisture is left.

The quote rate shall be inclusive of all design, & shop drawing and

sample mock of all elements approval from Architect & EIC. The quote

rate shall include all Taxes, duties, statutory obligations and safety code

compliance as per client. Rate shall be inclusive of all required Civil

work / Electrical wokr / fabrication work for fixing only primary strcure

shall be provided as base structre only as per requirement. Mode and

method of measurement shall be in accordance with IS. (Any Floor &

Sr. No. Item Description Quantity Unit Rate Rate With 1% LC Amount in Rs.

Towels / Wipes Size :

(3) washcloth-27"x 54"

Wipe down surface with a rag soaked in an alcohol-free, mild dish soap

Knurled items only: Scrub using a nylon-bristled brush while soap is on

Wipe down surface with a new rag of just water.

Wipe down surface with a new, dry rag, making sure no excess

moisture is left.

The quote rate shall be inclusive of all design, & shop drawing and

sample mock of all elements approval from Architect & EIC. The quote

rate shall include all Taxes, duties, statutory obligations and safety code

compliance as per client. Rate shall be inclusive of all required Civil

work / Electrical wokr / fabrication work for fixing only primary strcure

shall be provided as base structre only as per requirement. Mode and

method of measurement shall be in accordance with IS. (Any Floor &

Gym flooring / mats

Tile size :50cm x 50cm.x 10mm Thick

The area covered by one tile is 2.69sqft/0.25sqm.

BullrocK recommends using tiles of 20mm or above for heavy drop

zones. 10mm thick tiles can be used for

the floor with hard concrete as a base, and weights are less frequently

The quote rate shall be inclusive of all design, & shop drawing and

sample mock of all elements approval from Architect & EIC. The quote

rate shall include all Taxes, duties, statutory obligations and safety code

compliance as per client. Rate shall be inclusive of all required Civil

work / Electrical wokr / fabrication work for fixing only primary strcure

shall be provided as base structre only as per requirement. Mode and

method of measurement shall be in accordance with IS. (Any Floor &

Sports Equipment

Tannis Table 75MM WHEELS & LEVELERS TTFI APPROVED. 22 MM TABLE

333 TOP INCLUDES 6 WHEEL WITH 2 Lock dupont polyurethane antiglare paint, size 2740 mm X 2.00 Nos 70207.50 70909.58

1525mm x 760 mm height

Total Amount Rs.

Total Amount Rs.