Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹23.1 CrAccepted-Finance | ₹23.1 Cr | 1 | Accepted-Finance LOA issued |
| 2 | Rejected-Technical | - | - | Rejected-Technical Non-Responsive |
Tender Value
Refer Docs
EMD Value
₹34 L
Closing Date
4 Feb 2020, 3:00 pmClosed
CHIEF GENERAL MANAGER, PROJECTS, APSPDCL, TIRUPATI
CHIEF GENERAL MANAGER, PROJECTS, CORPORATE OFFICE, APSPDCL, TIRUPATI
DESIGN,SUPPLY,ERECTION,TESTING, COMMISSIONING OF 9 Nos 33/11KV OUTDOOR SS IN VIJAYAWADA, GUTNUR AND TIRUPATI CTIES UNDER WORLD BANK FUNDING
2019_APSPD_524149_1
CGM/PROJ/WB/NCB-23/19-20
Open Tender
Electrical Works
549 days
VIJAYAWADA GUNTUR AND TIRUPATI
Please refer Tender documents.
2 documents required · 2 mandatory
₹0
₹34 L
CORPORATE OFFICE, APSPDCL, TIRUPATI
12 Aug 2020
4 Dec 2019
4 Feb 2020
4 Dec 2019
4 Feb 2020
4 Dec 2019
16 Dec 2019
SCHEDULES
DESIGN & PRELIMINARY
SUPPLY OF MATERIALS
LABOUR, CIVIL & ROAD,WORKS AND DISMANTLING WORKS
Description of Work / Item(s)
DESIGN WORKS
Soil testing charges
Design & preparation of layout of floor plan (G+2) of the substation, PTRs Yard and civil structural duly certified by the approved structural Engineers.
Site investigating charges for locating borewell point
Detailed survey and tree clearance for 33KV UG Line
Detailed survey and tree clearance for 33KV OH Line
Detailed survey and tree clearance for 11KV UG Line
Detailed survey and tree clearance for 11KV OH Line
Detailed survey for UG Cable at railway crossing
Description of Work / Item(s)
SUPPLY OF MATERIAL
Supply, of structural supports (GI Joists 150 x 150 mm drilling holes etc.,) and structural Members (GI Channel 100 x 50mm) , GI Angle and seating channels including cost of G.I. bolts & Nuts for GI Joists & GI Channel, GI Angle including fabrication, galvanisation, transport, loading , unloading & erection charges as per Technical Specs
Supply of Yard lighting 8Mts long PSCC poles supports (Excluding excavation and CC works)
Supply of 90 lb rail poles of 3 Mtr length each over the transformer plinth including cost of rail poles, with stoppers.
supply of hume pipe of 300 mm diameter for cables at road crossing points including cost of all materials and labour complete
supply of Wedge connector suitable for four hole paddle for PT/ CT/ CB/ Isolator etc for termination with ampact panther conductor
supply of Wedge connector suitable for four hole paddle for PT/ CT/ CB/ Isolator etc for termination with ampact DOG conductor
supply of Wedge connector suitable for single panther to single panther conductor
supply of Four hole paddle 895 A for termination for PT/ CT/CB/ Isolator etc
supply of Four hole paddle 610 A for termination for PT/ CT/CB/ Isolator etc
supply of Palm connector suitable for (20 to 25 mm )dia stud
Supply of 33 KV 1-Ph Post type insulator (each) including cost of all materials & labour complete
Supply of 11KV 1-Ph Post type insulator (each) including cost of all materials & labour complete
supply of 75 x 8 mm M.S. Flat (Earth Mat)
supply of 50 x 6 mm M.S. Flat (Risers)
supply of free maintenance earth Pipe
supply of 2 Core 2.5 sq.mm. Copper cable
supply of 4 Core 2.5 sqmm copper cable
supply of 10 core 2.5 sq. mm copper cable
Supply of outdoor type AC street light fixtures with all necessary accessories fixed to GI pipe of 3/4" dia 3' length 120 degrees bent fixed to the existing pole / support in the switchyard. Outdoor type 9 LED energy efficiency AC street light
Supply of 4 way distribution board suitable for single pole MCBs in sheet steel enclosure with 1No. 32 Amps DP isolator and 4Nos. 6-32 Amps single pole MCBs with necessary connections etc., complete (MDS make)
Supply of 33 KV Circuit Breakers with C.T's. including trivector meter & control & relay panel
Supply of 11KV, 20 KA, VCB with C.T's. including trivector meter & control & relay panel
Supply of 11KV 20 KA, LV VCB with C.T's. including trivector meter & control & relay panel
Supply 24 Volts/ 40 AH Trickle charger with sealed maintainance free led acid batteries.
Supply of 33 KV Potential Transformer single phase including transport, loading and unloading charges
Supply of 11 KV Potential Transformer three phase including transport, loading and unloading charges
Supply of 33 KV Lighting Arrester (Stn Type) for 33 KV Bus
Supply of 33 KV Lighting Arrester for 33 KV Incoming feeder
Supply of 11 KV Lightining Arrestors (Stn. Type)
Supply of 11 KV Lightning Arrestors (line type)
Supply of 33 KV Isolators (800 A) double break with Post Type Insulator (G.I. Bolts should only be used )
Supply of 11 KV Isolators (400 A) double break with Post type Insulator (G.I. Bolts should only be used )
Supply of 11 KV Isolators (400 A) single break with Post type Insulator (G.I. Bolts should only be used ) for feeder outgoing
Supply of 11KV HG Fuse sets with Accessories complete
Supply of 3 Phase 25 KVA CSP Station Transformer including cost of LT Distribution box-including, erection of LT Switch gear, complete with cost of all materials LT Dist Box LT Cabling shall be done through suitable size of PVC Pipe for verticle run of cable at Dist. Box including transport, loading and unloading charges of all materials.
Supply of 5.0MVA 33 KV/11KV Power Transformer with all accessories complete as per specification including transport, loading , unloading and erection charges Conducting of all tests & commissioning will be carried by contractor
Supply of 11KV 2 MVAR Capacitor bank complete with accessories.
Supply of 1 No.Earth AB switch including 3No.s Las for capacitor bank
Supply of LTAC cable 25 Sq.mm 4 core reputed make
Supply of LTAC panels, annunciation panels in the control room
Supply of DC and annunciation Board as per TS
Supply of marshalling Box on the structure (pole mounted type)
Supply of 9 Ltrs capacity round bottom sand buckets along with bucket sand, Fire buckets with round bottom type enamel painted, white inside & red out side and letter FIRE inblack out side & Handle with mounting bracket installed on Fire bucket stand fabricated by M.S.angles as per local fire officers standards including cost of all materials
Supply of CO2 type Fire Extinguishers 4.5 Kg capacity confirming to IS 2878 made from ISI marked steam less cylinder confirming to IS:7285 & CE certified and fitted with ISI marked controlled valve confirming to IS:3224, high pressure 1 Mtr discharge hose & horn complete with initial gas charged with carrying handle with wheels and wall mounting bracket. Squeeze lever discharge, used unused indicator, Aphoxy coated paint (Red) with 93% gloss with 2 years warranty reputed makes Including transportation, etc complete.
Supply of tools - Standard Tool Box with Tools of recommended make type
Supply of 11 KV Insulated Rubber Hand Gloves
Supply of Auto switch-on wall mounted emergency light with 2 tubes of reputed makes
Supply of Rechargeble portable light with LED bulbs
Supply of Danger boards
Supply of Earth Discharging rods of 10 feet long for HT/LT lines made out of cane stick in PVC Pipe 32mm dia and 2 mm thick, fully covered, at one end fixed with copper strip of size 25X3 mm of 250mm length by 2 Nos. brass bolts and wing nuts with washers having 6 Sqmm PVC flexible copper wire of 10 Mt length.
Supply of steel office Table of size 4' x 2' x 30" with 18 mm plywood, Teakwood finishing with Drawers on right hand side and with automatic locking system
Supply of PVC chairs of standard make
Supply of Quartz wall clock 1' x 1' size of reputed make
Supply of 550 x 400mm size indian type Flat back Hand wash-basin reputed make with necessary bracket and fixing one chromium coated CP tap and accessories like waste water pipe and connection for the tap and G.M. wheel valve.(Single C.P.Pillar cock) (Item Code : BMW-D.24)
Supplying of good quality TV shape mirrors of size 60cmx45cm with alround PVC beading of approved colour with all fixtures including cost and conveyance all materials, labour charges for fixing etc., complete for finished item of work as directed by the Engineer in charge of work
Supply of 48" (1200mm) Sweep ISI mark Ceiling Fan of reputed makes as per IS 374 - 1979 and, with double ball bearings and with Electronic Regular of Modular reputed makes including cost and conveyance of all materials and labour charges complete for finished item of work as directed by the Engineer-in-Charge.
Supply of 1 x 36/40W Box type tube light luminaire powder coated CRCA sheet steel housing with VPIT Chokes and all standard accessories of reputed makes and 1 No. 36/40 W tube light including cost and conveyance of all materials and labour complete for finished item of work as directed by Engineer - In - Charge
Supply of light luminarie integral with outdoor type 35 LED energy efficiency AC street light including cost of fixture,25mm dia. Medium grade G.I. bent up pipe of length 1.52m, all accessories and labour charges complete for finished item of work as directed by the Engineer-in-charge.
Supplying and fixing 4 way distribution board with 15 AmpsICTP switch on teakwood board covered with decolam sheet with connections complete (2 Nos for AC and 1 No for DC) including cost of all materials and labour complete.
Supply of 30 Amps ICTP main switch from the approved suppliers as per IS.
Supply of Casing with heavy duty PVC rigid pipe of 160mm dia double socket PVC/SWR pipe 6Kg/Sq.cm - Prince / Sudhakar / Kisan / Supreme or any other ISI Brand including cost and conveyance of materials,
Supply of ISI mark submersible 2.0 HP, Single Phase 25 stages pumpset suitable for 106 / 156mm dia borewell with high quality water resistant and dynamically balanced bronze impeller with stainless steel shaft sleeves, pump coupling and pivot of Single phase 250V , 50Hz.. A.C. power supply copper winding with water proof insulation and high precision strength not to be effected by chemical in water and suitable bronze bearings with nut and bolts etc., with necessary H-type clamp of suitable size and strength including Direct - on - Line reputed make starters fitted in sheet metal box size of 265 x 295 x 110mm suitable enclosure for single phase motors up to 3 HP at 220V 50Hz operating range between 80 to 240 Volts with starting and running capacitors assembled with ISI mark contactors and fitted with Legrand make MCB, all operational and incidental charges complete for finished item work as directed by the Engineer-in-charge.
Supply of 3 Core 4.0 Sqmm Flat Copper cable as per IS 694:1990 for Submersible Motors of reputed makes including cost and conveyance of all materials complete for finished item work as directed by the Engineer-in-charge.
Supply of Polyethylene water storage tank double layer conforming to IS:12701 - 1996 of 1000 Ltr capacity with lid including cost and conveyance of all materials etc., complete for finished item of work
Supply of 32mm dia PE 80 Grade material 12.5 kg / Cm2 ISI Mark HDPE pipe upto 600 feet reputed Makes including cost and conveyance of all materials leads and lifts etc., complete for finished item of work as directed by the Engineer - In - Charge
Supply of different dia.Unplasticised PVC Pipes,10 kg/cm2 for potable water supplies conforming to IS : 4985/2000 (third revision) with bell ends (Socket) as per specification in light Grey/Natural Ivory Grey/ Any other Color as directed by the Engineer-in-charge.
32mm dia UPVC pipe
25mm dia UPVC pipe
20mm dia UPVC pipe
Supply of GM Gate ( GM peet) valves as per IS 778 Class I -Indian make heavy type of different sizes as directed by the Engineer-in-charge.
32 mm GM Gate valve
25 mm GM Gate valve
Supply of RCC Rings, RCC Lid 1.22mt. dia and packing the joints neatly with CM (1:3) 12mm thick Inculding C/c as directed by Engineer
1.22mt. Dia Rings
1.22mt. Dia Lid
Cement Tubs
Supply of in walls,ground different dia PVC Pipes of reputed makes make as directed by Engineer
a) Vent Pipe 75mm dia
b) 110mm dia.PVC Pipe
33KV Line
33KV UG cable (4.3 KM)
Supply of 3x400Sqmm, 33KV, XLPE armoured cable in the cable trenches as per standards.
Supply of Straight Through type for 33KV, 3cx400Sqmm, XLPE armoured cable heat shrinkable cable jointing kits
Supply of end termination outdoor type for 33KV, 3cx400Sqmm, XLPE armoured cable heat shrinkable cable jointing kits
33 KV Line type Lightening Arrestors
Supply of 300mm DWC/GI Pipe thickness 5mm
3 Nos. of M+6 Tower For 33 KV Line
Supply of Galvanized M+6 Tower as per Specification Including Stubs,Suitable Hot ip Galvanized, Zinc coated Nuts and bots with suitable plain and spring washets, etc.
80 mm dia CI pipe
3 Nos. of M+9 Tower For 33 KV Line
Supply of Galvanized M+9 Tower as per Specification Including Stubs,Suitable Hot ip Galvanized, Zinc coated Nuts and bots with suitable plain and spring washets, etc.
80 mm dia CI pipe
3 Nos. of M+12 Tower For 33 KV Line
Supply of Galvanized M+12 Tower as per Specification Including Stubs,Suitable Hot ip Galvanized, Zinc coated Nuts and bots with suitable plain and spring washets, etc.
80 mm dia CI pipe
33KV OH LINE ON12.5 SPUN POLES
12.5Mtrs.Spun poles
9.1Mtr. PSCC Poles for struts
100Sqmm AAA conductor
Strut clamps set with bolts and nuts
33 KV 'V' Cross Arms
M.S Channel 100x50 mm for side arams
M.S angle 65x65x8 mm
MS Back Clamps
HT Top Fitting
33 KV Pin Insulators with pins
MS Stay set complete
HT Guy Insulators
33KV Polimer Strain Insulator
GI Stay wire 7/3.15mm
Bolts and nuts of different sizes
No.6 GI wire for coil earthing
Line DP structure with A.B.Switch with 12.5 Mts Spun poles (9 Nos.)
12.5Mtr.Spun Pole
MS Channel 100 X 50 mm
MS Angle 65 X 65 X 6 mm
MS Flat 75x8mm
33 KV Polymers with metal parts
33 KV, 800 Amp. AB Switch
GI earth pipe 40mm dia 1.8M long
4mm dia GI wire
Alluminium 'T' clamps of suitable size
Alluminium tape
100 Sq.mm AAA Conductor
Bolts and nuts of different sizes
danger Boards
Vertical Formation With 12.5 Mtrs Spun Poles (9 Nos.)
12.5Mtr.Spun Pole
MS back Clamps
33 KV Polymer Insulators (B&S) with Metal parts
Alluminium 'T' clamps of suitable size
Alluminium tape
Bolts and nuts of different sizes
Single Pole cut point With 12.5Mtrs Spun Poles with 2 Nos channel cross arams (22 Nos.)
12.5 Mts spun pole
100X50mm MS Channel
MS Angle 65x65x6 mm
MS flat 75x8 mm for fish plates
MS back Clamps
33 KV Polymer Insulators (B&S) with Metal parts
33 KV Pin Insulators with pins
Alluminium 'T' clamps of suitable size
Alluminium tape
Bolts and nuts of different sizes
Single Pole angle cut point With 12.5Mtrs Spun Poles with 4 Nos channel cross arms (22 Nos.)
12.5M Spun pole
100X50mm MS Channel
MS Angle 65x65x6 mm
MS back Clamps
33 KV Polymer Insulators (B&S) with Metal parts
33 KV Pin Insulators with pins
Alluminium 'T' clamps of suitable size
Alluminium tape
Bolts and nuts of different sizes
Tapping cross arms (9 Sets)
100X50mm MS Channel
MS Back Clamp
33 KV polymer stain Insulators (B&S) with Metal parts
33 KV Pin Insulators with pins
Bolts and nuts of different sizes
33KV Pin Insulators on existing supports
LT 3-Ph cross arms LT pin insulator complete with hardware wherever necessary on existing poles (9 Sets)
75x40 mm M.S channel
MS back clamp
LT pin insulator with pin
CI knob
Side arm with strut angle OR V cross arm and H x arm with A type pedastal, pin insulator complete (11KV line) (22 Nos.)
MS Channel 75x40 mm
MS angle 50 x50 x6mm
MS Flat 50 x 6 mm
MS Back Clamp
11 KV Pin Insulators with pins
Bolts and nuts of different sizes
11KV Line
11KV UG cable
Supply of 3x185Sqmm, 11KV, XLPE armoured cable in the cable trenches as per standards.
Supply of Straight Through type for 3x185Sqmm, 11KV, XLPE armoured cable heat shrinkable cable jointing kits
Supply of end termination Outdoor type for 3x185Sqmm, 11KV, XLPE armoured cable heat shrinkable cable jointing kits
Supply of 300mm DWC/GI Pipe thickness 5mm
11KV LINE 11 Mts Spun POLES: Supply of 11Mtrs Spun poles including earth coils, cross arms, top cleats, pin insulator complete with hardware
11Mtrs Spun poles
11 KV 'V' Cross Arm
MS Back Clamp
HT Top Fitting
11 KV Pin Insulators with pins
11 KV Polymer Strain Insulators with metal parts
Bolts and nuts of different sizes
Line DP structure with AB Switch (9 Nos.)
11Mtrs Spun poles
100X50mm MS Channel
50x50x6 mm angle
11 KV polymer starin Insulators (C&T) with Metal parts
11 KV, 400 Amp. AB Switch
GI earth pipe 40mm dia 2.5M long
4mm dia GI wire
Alluminium 'T' clamps of suitable size
Alluminium tape
back clamps
Bolts and nuts of different sizes
MS stay set with HT Guy insulator & 7/3.15mm GI Stay wire complete (40 Sets)
MS Stay set complete
stay wire 7/3.15 mm
HT Guy Insulator
Bolts and nuts of different sizes
9.1 Mtrs/200Kg WL PSCC poles as struts complete
9.1 Mtr., 200 Kg WL PSCC Pole
Strut clamps sets
Bolts and nuts of different sizes
Vertical Formation including 11 mts Spun poles and supply of 6Nos.11KV Polymer string insulator C&T type with metal parts, 3Nos. 11KV pin insulators with pins to horizantal cross arms (100x50mm), top cleat and back clamps. (9 Nos.)
11 mts Spun poles
MS Back Clamp
11 KV pin insulators with pins
11 KV polymer starin Insulators (C&T) with Metal parts
Alluminium 'T' clamps of suitable size
Alluminium tape
Bolts and nuts
Single Pole cut point (35 Nos.)
11 mts Spun poles
100X50mm MS Channel for 11 KV Horizontal Cross Arm
50x50x6 mm angle
MS flat 50 x 6 mm for fish plates
11 KV polymer starin Insulators (C&T) with Metal parts
11 KV Pin Insulators with pins
Alluminium 'T' clamps of suitable size
Alluminium tape
Bolts and nuts of different sizes
Angle cut point (35 Nos.)
11 mts Spun poles
100X50mm MS Channel for 11 KV Horizontal Cross Arm
50x50x6 mm angle
MS flat 50 x 6 mm for fish plates
11 KV polymer starin Insulators (C&T) with Metal parts
11 KV Pin Insulators with pins
Alluminium 'T' clamps of suitable size
Alluminium tape
Misc. items like coil earthing, jumpering, bolts & nuts etc.
Tapping cross arm (horizantal) supported by 50x50x6mm MS angle as strut, back clamps, 3Nos. 11KV strain insulators/ Polymer string insulator with metal parts (9 Nos.)
75X40mm MS Channel for 11 KV Horizontal Cross Arm
50x50x6 mm angle
MS Back Clamp
11 KV polymer starin Insulators (C&T) with Metal parts
11 KV Pin Insulators with pins
Bolts and nuts of different sizes
Side arm with strut angle OR V cross arm and Horizontal x arm with A type pedastal, pin insulator complete with hardware wherever necessary on existing pole (35 Sets)
100X50mm MS Channel for 11 KV Horizontal Cross Arm
MS angle 50 x50 x6mm length 2.2 mtrs
MS Flat 50 x 6 mm length 1.6 mtrs
MS Back Clamp
11 KV Pin Insulators with pins
Bolts and nuts of different sizes
LT 3 phase cross arm LT pin insulators complete with hardware wherever necessary on existing pole
3 phase 5 wire cross arms
3 phase 4 wire cross arms
LT pin insulator with pins
LT Back clamp
LT shackle insulators with metal parts
Bolts and nuts of different sizes
Supply of 3Sets of strain insulators (C&T type) (9 nos.)
11 KV polymer starin Insulators (C&T) with Metal parts
11 KV Pin Insulators with pins
Alluminium 'T' clamps
Alluminium tape
Bolts and nuts
100Sq.mm All Aluminium Alloy Conductor
Description of Work / Item(s)
LABOUR & CIVIL WORKS
Earth work excavation in all types of soil which can be excavated with pick axes and crow bars and do not require blasting in all conditions such as dry, wet, slushy etc., including shoring, strutting and dewatering where ever necessary covering initial lead for foundations for finished item of work.
Earth work excavation in all types of soil which can be excavated with pick axes and crow bars and do not require blasting in all conditions such as dry, wet, slushy etc., including shoring, strutting and dewatering where ever necessary covering initial lead for foundations for finished item of work but in hard rock which requiring blasting.
Supply and filling in the foundations and basement with sand, including watering and consolidation thoroughly in 150 mm layers. (including seigniorage charges)
PCC (1:5:10) Prop using 40 mm HBG metal machine mixed laid in positions in layers not exceeding 15 Cm thickness including cost and conveyance of all materials, seigniorage charges, water to work site and all operational, incidental, labour charges such as machine mixing of concrete laying, tamping, curing etc., complete for finished item of work
Construction of R.R.masonary in C.M(1:6) using hand granite including cost conveyance of all materilas, seignoirage charges, labour charges, operational, incidental charges etc., complete for finished item of work.
Construction of C.R.S Masonary in CM(1:6) using hard granite stone including cost and conveyance of all materials, seignoirage charges, labour charges, operational, incidental charges etc., complete for finsihed item of work.
Filling of gravel in trenches, sicks of foundations, basements etc. of approved quality in layers not exceeding 15 c.m. thick consolidating each deposited layer by watering and ramming including cost and conveyance of gravel ,seignoirage charges, water to work site and operational, incidental, labour charges etc. complete for furnished item of work
Construction of super structure with brick masonary in c.m. (1:6) prop. Using 2nd class bricks with tradional size of 23x11x7xcm having a crushing strenth of not less than 35Kgs/cm2 including cost and conveyance of gravel ,seignoirage charges, water to work site all operational, incidental, labour charges such as scaffolding, mixing mortor, constructing masonary leads lifts, curing etc., complete for furnished item of work
RCC M-20 Nominal mix corresponding to Table 9 of IS 456 using 12mm to 20mm size graded HBG machine crushed metal (50% each) from approved quarry including cost and conveyance of all materials like cement, fine aggregate(sand), coarse aggregate, water etc. to site and including Seigniorage charges, sales& other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, centering,shuttering, curing etc., complete but excluding cost of steel and its fabrication charges for finished item of work as directed by the Engineer-in-charge.
Ground Floor For Lintels
Ground Floor For Sun shades/Chajjas (62mm average thickness and 60 cm width)
Ground Floor For roof slabs
Ground Floor For Beams
For Footings
For Plinth Beams
Ground Floor For Columns
P.C.C.(1:2:4) prop. using 20mm(SS-5) gauge HBG machine crushed metal including cost and conveyance of all materials seignoirage charges, water to work site all operational, incidental, labour charges such as scaffolding, ceiling, mixing concrete laying, vibrating, curing etc., for furnished item of work for bed blocks, for doors, windows ventilators etc. and damp proof course at plinth level.
Supply and fixing of Kadapa slabs of 40mm thick for racks including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work as directed by the Engineer-in-Charge.
Providing of high yield strength deformed bars/mild steel bars of different diameters, cutting & bending to required sizes in shapes, placing in position with cover blocks of approved material in size firmly with MS binding wire, forming grills for reinforcement work as per approved designs &drawings to be supplied at the time of execution of work including wastage of binding wire, cover blocks all operational, incidental, labour charges such as cutting, bending placing in position etc. complete for finished item of work payment will be made on the basis of weight of the fabricated deformed bars/mild steel plain bars only.
Flooring with a bed of 100mm thick in CC (1:4:8) with 40mm & 20mm size HBG Metal from approved quarry including cost and conveyance charges of cement and all other materials to site, seigniorage charges, labour charges for machine mixing, laying concrete, finishing top surface to the required level, curing etc., complete for finished item of work
Plastering 12 mm thick in one coat for superstructure for "EVEN FACES OF WALLS" with CM(1:5) with smooth finish at all heights including cost and conveyance charges of cement and all other materials to site, scaffolding charges, seigniorage charges, incidental and operational charges, all labour charges for mixing mortar, finishing, all leads and lifts, curing, cutting grooves etc., complete
Plastering 20mm thick two coats, first coat in cm(1:6) prop.16mm thick and 2nd coat in cm(1:4) prop. 4mm thick with dubara sponge finishing including cost and conveyance of all materials, seignoirage charges, operational, incidental, labour charges such as scaffolding, mixing curing leads, lifts etc., complete for "UNEVEN FACES OF WALLS"
Plastering to ceiling, 12 mm thick in one coat in CM(1:3) with sponge finish at all heights including cost and conveyance charges of cement and all other materials to site, scaffolding charges, seigniorage charges, incidental and operational charges, all labour charges for mixing mortar, finishing, all leads and lifts, curing, cutting grooves etc., complete for finished item of work
Supplying and fixing in position M.S hallow frames of size 105x60x1.25mm thick for doors along with necessary accessories such as M.S hinges 100 mm long etc., as stated in the detailed specifications including cost and conveyance of all materials to work site, labour charges etc., complete (a). 1.07mx1.980m.
Supply and fixing of 30mm thick Flush door shutter,solid bond wood block board type with teak ply on both faces confirming to IS:2202 of reputed makes vide item code BMT-N.13 including cost and fittings of 4 Nos 125mm Brass Butt hinges , 3 Nos. MS Tower bolts, 1No 250 mm powder coated aldrop, 2 Nos 150 mm MS powder coated handles, 1No. door stopper complete for finished item of work
Supply and fixing PRE-PAINTED STEEL, WINDOWS & VENTILATORS of reputed make made of pre-painted steel(base steel as per IS 513 of 0.6mm thick "D" quality, galvanized as per IS 277 with zinc of 120 GSM) primer coated with epoxy primer of 5-7 microns thick, finish painted with a ployester paint of 12-16 microns thick and back coated with 5-7 microns thick alkyd backer, section for outer frame should be 46X52mm section for shutter should be 46X46mm section for mullion should be 46X70mm and section for beading should be 18X25mm and section for louvered ventilation should be 33X57mm box section. The windows should be panelled with 5mm thick plain float glass & 4mm pinhead glass for ventilators with ethyl propylene diamine monomer gasket (EPDM). The sections are to be cut to length mitre joined with corner brocket centre mullions are to be fixed using mullion cap. Handle made of high grade aluminium powder coated and nylon receiver. Gaskets made of Ethyl propylene diamine monomer(EPDM). Corner brackets made of CRCA with zinc phosphate. Mullion caps made of glass filled nylon. The above frames should be fixed to the concrete/masonry wall by means of self expanding screws including 10mm square guard bars with 6" pitch complete for finished item of work.
Providing impervious coat with CM(1:3) 20 mm thick using approved waterproofing compound of 1Kg. per 1 Bag of Cement over terrace including cost and conveyance charges of cement and all other materials to site, scaffolding charges, seigniorage charges, incidental and operational charges, all labour charges for mixing mortar, finishing, all leads and lifts, curing, cutting grooves etc., complete for finished item of work and as directed by the Engineer in charge.
Painting the walls (Inside) and ceiling with two coats of Plastic emulsion paint grade-I of reputed make over one coat of primer of approved colour, make and shade over one coat of white cement primer including cost and conveyance of all materials to site, water to site, cost of brushes, scaffolding charges, all labour charges, curing, tools and plant, incidental charges, all leads and lifts etc at all heights of all floors complete for finished item of work and as directed by the Engineer in charge.
Painting to walls (out side) with two coats of Weather proof exterior emulsion of reputed make equivalent quality paint of approved colour, make and shade over one coat of white cement primer including cost and conveyance of all materials, water to site, cost of brushes, scaffolding charges, all labour charges, curing, tools and plant, incidental charges, all leads and lifts etc at all heights of all floors complete for finished item of work and as directed by the Engineer in charge.
Painting with 2 coats of synthetic enamel paint over one coat of Primer including cost and conveyance of all materials all leads,lifts etc complete.
Supply and fixing of 3" outer dia PVC water spouts of standard make including cost and conveyance of all materials necessary auxilaries such as bends, shover, clamps etc., complete for finished item of work.
Flooring with ceramic floor tiles, 7.3mm thick 1st quality of approved shades set over base coat of cement mortar (1:8), 12 mm thick over CC bed already laid including neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, sand water and tiles etc., complete for finished item of work.
Pointing to the C.R.S masonary with CM (1:3) prop including cost and conveyance of all materials, sienarage charges, labour charges etc., complete for finished item of work.
Supply and erection of MS gates of size (4200 mm X 1420 mm and 1220 mm X 1420 mm) using 50 mm dia MS pipe and 12 mm dia rods and 300 mm X (4200 mm + 1220 MM) MS sheet (1.5 mm thick) and painting two coats of superior quality enamel paint over one coat of primer as per drawing. (excluding cost of RCC gate pillars (0.45 X 0.45 X 1.5m), excluding plastering )
Clearing of Sub-Station site using JCB on hire basis including all operational charges, hire charges complete as directed by the engineer in charge
Earth work excavation in all types of soil which can be excavated with pick axes and crow bars and do not require blasting in all conditions such as dry, wet, slushy etc., including shoring, strutting and dewatering where ever necessary covering initial lead for foundations for finished item of work.
Earth work excavation in hard rock soil which can be excavated and require blasting in all conditions including shoring, strutting and dewatering where ever necessary covering initial lead for foundations for finished item of work.
Fabrication & Erection of structural supports (GI Joists 150 x 150 mm drilling holes etc.,) and structural Members (GI Channel 100 x 50mm) , GI Angle and seating channels including cost of G.I. bolts & Nuts for GI Joists & GI Channel, GI Angle including fabrication, galvanisation, transport, loading , unloading & erection charges as per TS
Erection of Yard lighting 8Mts long PSCC poles supports (Excluding excavation and CC works)
Laying foundations for main and auxiliary structures, supports, breaker and transformer plinth, coping of supports etc., including shoring, shuttering, and dewatering the pits before and during the process of laying concrete in following proportions and curing for 14 days (Rate quoted shall be inclusive of fixing and concreting foundation bolts wherver necessary) Cement concrete (1:4:8) using 40mm size well graded, HBG metal for foundations, including cost conveyance of materials, all leads and lifts, machine mixing, laying, consolidation, curing etc., complete for finished item of work. (base concreting) (including seigniorage charges) (including 1No. Addl. PTR & LV VCB Plinths)
Cement concrete 1:3:6 using 20 mm H.B.G. metal (mass concreting) (including seigniorage charges) for Power Transformer & VCB Plinths (including 1No. Addl. PTR & LV VCB Plinths)
Construction of R.R.masonry in C.M(1:6) using hand granite including cost conveyance of all materilas, seignoirage charges, labour charges, operational, incidental charges etc., complete for finished item of work.
Construction of C.R.S Masonary in CM(1:6) using hard granite stone including cost and conveyance of all materials, seignoirage charges, labour charges, operational, incidental charges etc., complete for finsihed item of work.
Fixing of 90 lb rail poles of 3 Mtr length each over the transformer plinth including cost of rail poles, with stoppers.
Plastering the foundation plinths 12mm thick in 1:3 cement and white washing (two coats) with JANATA CEM or equivalent cement paint, including cost of all materials including cement.
Raised Pointing to the C.R.S masonary with CM (1:3) prop including cost and conveyance of all materials, sienarage charges, labour charges etc., complete for finished item of work.
Excavation of cable trench of size 600 x 450 mm in the switchyard including cost of all materials and labour complete
Cable Duct in the CONTROL ROOM. Construction of cableduct in the control room shall be of size 600 x 450 mm and closing of duct with cement slabs includes cost of all materials and labour and the cost of cement
Laying of hume pipe of 300 mm diameter for cables at road crossing points including cost of all materials and labour complete
Hoisting of insulators and hardware stretching the conductor and stringing tensioning and clamping of 33 KV bus comprising of three (3) conductors, with Single 200 sq.mm ACSR conductor (The approximate length of bus section will be 11.5 Mt)
Hoisting of insulators and hardware stretching the conductor and stringing tensioning and clamping of 11 KV bus comprising of three (3) conductors, with Single 200 sq.mm ACSR conductor (The approximate length of bus section will be 9 Mt)
Connecting the equipment to bus and /or another equipment with single 200 sq. mm ACSR conductor including measuring, Cutting (complete) for Fired Wedge connectors (excluding cost of fired wedge connector)
Erection of Wedge connector suitable for four hole paddle for PT/ CT/ CB/ Isolator etc for termination with ampact panther conductor
Erection of Wedge connector suitable for four hole paddle for PT/ CT/ CB/ Isolator etc for termination with ampact DOG conductor
Erection of Wedge connector suitable for single panther to single panther conductor
Erection of Four hole paddle 895 A for termination for PT/ CT/CB/ Isolator etc
Erection of Four hole paddle 610 A for termination for PT/ CT/CB/ Isolator etc
Erection of Palm connector suitable for (20 to 25 mm )dia stud
erection of 33 KV 1-Ph Post type insulator (each) including cost of all materials & labour complete
erection of 11KV 1-Ph Post type insulator (each) including cost of all materials & labour complete
Laying of earth mat including excavation of trenches welding and fixing of trenches welding and fixing lugs, connecting to equipment and including connecting cast iron pipes with the following size of MS flats. including transport, loading , unloading & erection charges 75 x 8 mm M.S. Flat (Earth Mat)
Laying of earth mat including excavation of trenches welding and fixing of trenches welding and fixing lugs, connecting to equipment and including connecting cast iron pipes with the following size of MS flats. including transport, loading , unloading & erection charges 50 x 6 mm M.S. Flat (Risers)
Excavation of earth pit, free maintenance earth Pipe, cement collar, bentonite compound etc., and labour charges complete (as per the Sketches). A) U/L listed and marked duly engraving on the Grounding Electrodes of 5/8’’ or better Copper Bonded steel rods with minimum 25 kA peak and 14 kA rms for 1 sec as per specification with clear marking of U/L Reg No, Name of the company and part No on the electrode. b)Ground enhancement material of minimum 20 kG per kit with a resistivity of less than 0.12 ohm-m as per IEEE80 clause 14.5d duly specifying name of manufacturer, Batch code, resistivity value, testing apparatus used and conformity statement as per IEC 62561-7. c)H clamp of gun metal connecting adaptor as per specification d)Installation of copper bonded steel rod of dia 5/8 inch or better with a length of 3meters refilling with Ground Enhancement Material (GEM) of 0.12 ohm meter resistivity as per IEEE 142-2007 in Hard soil/Hard Rock/High Water Table Zone/ Sandy soil with boring/Trench, soil compaction & re-bore/refilling with installation as per bid specification
Drilling of earth for 6" dia bore with Power rig for providing of master earthing (Counter poise earthing)
Laying of control cables of all sizes in cable ducts. This includes running cables in control room, SWITCH YARD and Roadcrossing etc as per TS
2 Core 2.5 sq.mm. Copper cable
4 Core 2.5 sqmm copper cable
10 core 2.5 sq. mm copper cable
Cable terminations to the Switchgear marshalling boxes/ panel terminal blocks/ control & relay panels, LTAC panel, including providing suitable ferrules and lugs as per specification including cost of Ferrules and lugs and glands and labour complete as per specification. (Rate to be quoted is for termination of one core of cable at both ends)
fixing of outdoor type AC street light fixtures with all necessary accessories fixed to GI pipe of 3/4" dia 3' length 120 degrees bent fixed to the existing pole / support in the switchyard. Outdoor type 9 LED energy efficiency AC street light
fixing of 4 way distribution board suitable for single pole MCBs in sheet steel enclosure with 1No. 32 Amps DP isolator and 4Nos. 6-32 Amps single pole MCBs including cost and conveyance of all materials, labour charges with necessary connections etc., complete (reputed make)
Erection & Commissioning of 33 KV Circuit Breakers with C.T's. including trivector meter & control & relay panel
Erection & Commissioning of 11KV, 20 KA, VCB with C.T's. including trivector meter & control & relay panel
Erection & Commissioning of11KV 20 KA, LV VCB with C.T's. including trivector meter & control & relay panel
Erection & Commissioning of 24 Volts/ 40 AH Trickle charger with sealed maintainance free led acid batteries.
Erection & Commissioning of 33 KV Potential Transformer single phase including transport, loading and unloading charges
Erection & Commissioning of 11 KV Potential Transformer three phase including transport, loading and unloading charges
Erection & Commissioning of 33 KV Lighting Arrester (Stn Type) for 33 KV Bus
Erection & Commissioning of 33 KV Lighting Arrester for 33 KV Incoming feeder
Erection & Commissioning of 11 KV Lightining Arrestors (Stn. Type)
Erection & Commissioning of 11 KV Lightning Arrestors (line type)
Erection & Commissioning of 33 KV Isolators (800 A) double break with Post Type Insulator (G.I. Bolts should only be used )
Erection & Commissioning of 11 KV Isolators (400 A) double break with Post type Insulator (G.I. Bolts should only be used )
Erection & Commissioning of 11 KV Isolators (400 A) single break with Post type Insulator (G.I. Bolts should only be used ) for feeder outgoing
Erection & Commissioning of 11KV HG Fuse sets with Accessories complete
Erection & Commissioning of 3 Phase 25 KVA CSP Station Transformer including cost of LT Distribution box-including, erection of LT Switch gear, complete with cost of all materials LT Dist Box LT Cabling shall be done through suitable size of PVC Pipe for verticle run of cable at Dist. Box including transport, loading and unloading charges of all materials.
Erection & Commissioning of 5.0MVA 33 KV/11KV Power Transformer with all accessories complete as per specification including transport, loading , unloading and erection charges Conducting of all tests & commissioning will be carried by contractor
Erection, testing and commissioning of 11KV 2 MVAR Capacitor bank complete with accessories.
Erection & Commissioning of 1 No.Earth AB switch including 3No.s Las for capacitor bank
laying of LTAC cable 25 Sq.mm 4 core reputed make
Erection & Commissioning of LTAC panels, annunciation panels in the control room, duly mounting them on channels and grouping them with foundation bolts including cost of pannels. LTAC cable and cable laying in the trench of size 600 x 450 mm
Erection & Commissioning of DC and annunciation Board as per TS
Erection of marshalling Box on the structure (pole mounted type)
fixing of 9 Ltrs capacity round bottom sand buckets along with bucket sand, Fire buckets with round bottom type enamel painted, white inside & red out side and letter FIRE inblack out side & Handle with mounting bracket installed on Fire bucket stand fabricated by M.S.angles as per local fire officers standards including cost of all materials
fixing of CO2 type Fire Extinguishers 4.5 Kg capacity confirming to IS 2878 made from ISI marked steam less cylinder confirming to IS:7285 & CE certified and fitted with ISI marked controlled valve confirming to IS:3224, high pressure 1 Mtr discharge hose & horn complete with initial gas charged with carrying handle with wheels and wall mounting bracket. Squeeze lever discharge, used unused indicator, Aphoxy coated paint (Red) with 93% gloss with 2 years warranty (reputed make) Including transportation, all taxes and all labour charges etc complete.
fixing 550 x 400mm size indian type Flat back Hand wash-basin (reputed make) with necessary bracket and fixing one chromium coated CP tap and accessories like waste water pipe and connection for the tap and G.M. wheel valve.(Single C.P.Pillar cock) (Item Code : BMW-D.24)
fixing of good quality TV shape mirrors of size 60cmx45cm with alround PVC beading of approved colour with all fixtures including cost and conveyance all materials, labour charges for fixing etc., complete for finished item of work as directed by the Engineer in charge of work
Supply & erection of Security fencing with small iron gate and removable GI linked mesh with 75X40X6mm ISMC MS Channel Support with frame made of MS Angle of size 25X25X6 mm (ISA) and with 2Nos. MS Flat of size 25X6 mm for supporting the mesh including cost of all materials, labour charges complete as shown in the sketch
Supply and spreading of 6mm Chips (HBG Metal) with a band of 75 mm height uniformily throughout the switchyard including cost & conveyance of all materials, labour charges etc. complete
Painting of operating rods of 33 KV, 11KV AB Switches with Post Office Red colour (including cost of paint).
Painting of all supports for a height of 0.3 M above coping with bitumen paint (Black colour) and painting of coping two coats of white cement (including cost of paint).
ELECTRICAL WIRING FOR THE CONTROL HOUSE
Wiring with 1/1.40 mm unsheathed PVC 3/20 copper cable with No. 14 SWG G.I. Wire for earth continuity in 16 gauge surface PVC conduit pipe with necess-ary earth clips with 5 amps flush typed control switch for light points fan points and plug point including fixing of control switch on teak wood board covered with decolam sheet including cost of all materials & labour.
fixing of 48" (1200mm) Sweep ISI mark Ceiling Fan of reputed makes as per IS 374 - 1979 and, with double ball bearings and with Electronic Regular of Modular of including cost and conveyance of all materials and labour charges complete for finished item of work as directed by the Engineer-in-Charge.
Erection of 1 x 36/40W Box type tube light luminaire powder coated CRCA sheet steel housing with VPIT Chokes and all standard accessories of reputed makes and 1 No. 36/40 W tube light including cost and conveyance of all materials and labour complete for finished item of work as directed by Engineer - In - Charge
Supply and fixing decorative portico type light fitting with all accessories to the ceiling of varandah including giving connections.
Supply and fixing of batten holder/ slanting holder in lieu of ceiling rose of light point complete with all connections and labour charges, cost of 60 W bulb etc., complete for finished item of work.
Supply and fixing water tight well glas fittings with brass holder complete with 100 watt bulb including cost of GL bracket complete
fixing of light luminarie integral with outdoor type 35 LED energy efficiency AC street light including cost of fixture,25mm dia. Medium grade G.I. bent up pipe of length 1.52m, all accessories and labour charges complete for finished item of work as directed by the Engineer-in-charge.
Supply and fixing 5 Amps, 3 pin power plug including supply and fixing 5 Amps 2 Pin non interlocking switch and plug with 5 Amps fuse unit on teak wook board with Decolam top.
Supply and fixing 15 Amps. 3 pin power plug including supply and fixing 3 pin noninterlocking switch and plug with 15Amps fuse unit on teakwook board with decolam shet complete.
Supply & Run 2 of 1/2.80 PVC unsheathed aluminium grade cable in 20 mm 16 guage PVC surface conduit pipe with earthing clips and mains from distribution Board to lighting point board including cost of all materials and labour complete.
fixing 4 way distribution board with 15 AmpsICTP switch on teakwood board covered with decolam sheet with connections complete (2 Nos for AC and 1 No for DC) including cost of all materials and labour complete.
supply & Run 4 of 7/20 mm PVC unsheathed copper 650 volts grade cable in 50 mm. 16' guage PVC surface conduit pipe with earth clips and No. 8 SWG GI wire for earth continuity for run of main from meter board to 30 Amps.ICTP main switch including cost of all materials.
supply & Run 2 of 7/1.70 mm PVC unsheathed aluminium grade cable in 25 mm. 16 gauge PVC surface conduit pipe with earthing clips for mains from main TPIC switch to distribution board including cost of all materials
supply & Run of 2 of 1/1.80 mm PVC unsheathed aluminium cables 650 V grade in 20 mm 16 gauge PVC surface conduit pipe with earthing clips and main from distribution boards to 15 Amps 3 pin plug including cost of all and no 8 SWG GI wire for earth continuity for 6 cm of materials.
Providing independent earthing for 3 phase main board asper ISI 732 with 40 mm Gi pipe of 0.3 meters length for taking earth wire including supply of hard coke and salt and other materials including all labour charges complete.
fixing of 30 Amps ICTP main switch from the approved suppliers as per IS.
CONSTRUCTION OF APPROACH ROAD, RETAINING WALL, LEVELLING OF SITE ETC
Supply and spreading gravel / approved quality of soil for levelling of site for switch yard, control room including stacking for pre-measurements, conveyance for an average lead of 100 mts., spreading, watering and rolling with 2 to 3 ton capacity roller. (including seigniorage charges)
Back filling of foundations with excavated soils in switch yard including watering and consolidation with 150 mm layer.
FORMATION OF WBM APPROACH ROAD :
Collection and supply of gravel including stacking at site for premeasurement etc.complete.(including seigniorage charges)
Providing, laying, spreading and compacting stone aggregates of 65 mm Single nominal size to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with three wheel 80-100 kN roller in stages to proper grade and camber, applying and brooming, crushable screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density as per Technical Specification of MORDto a compacted thickness of 100 mm.
Construction of hume pipe culvert :
Earth work excavation in all types of soil which can be excavated with pick axes and crow bars and do not require blasting in all conditions such as dry, wet, slushy etc., including shoring, strutting and dewatering where ever necessary covering initial lead for foundations for finished item of work.
Supply and filling in the foundations and basement with sand, including watering and consolidation thoroughly in 150 mm layers. (including seigniorage charges)
Cement Concrete (1:4:8) using 40 mm size well graded HBG metal for foundations including cost and conveyance of all materials, all leads and lifts, consolidation, curing etc.,complete for finished item of work ( Base concreting ) ( including seignorage charges ) ( including 1 No. addl. PTR & LV VCB Plinths)
Supply and keeping the 450 mm dia RCC Plain ended Hume pipes in position including fixing collars etc. complete.
Construction of R.R.masonry in C.M(1:6) using hand granite including cost conveyance of all materilas, seignoirage charges, labour charges, operational, incidental charges etc., complete for finished item of work.
Brick masonry CM (1:6) mix using well burnt country bricks including cost and conveyance of all materials and labour charges etc.complete
Supply and filling with borrowed gravel watering and consolidation etc. complete.(including seigniorage charges)
Flush pointing with CM (1:3) including cost and conveyance of all materials and labour charges etc., complete
Plastering with CM (1:5) Mix 12 mm thick including cost and conveyance of all materials and labour charges etc.
CONSTRUCTION OF RETAINING WALL AROUND SWITCH YARD:
Earth work excavation in all types of soil which can be excavated with pick axes and crow bars and do not require blasting in all conditions such as dry, wet, slushy etc., including shoring, strutting and dewatering where ever necessary covering initial lead for foundations for finished item of work.
Supply and filling in the foundations and basement with sand, including watering and consolidation thoroughly in 150 mm layers. (including seigniorage charges)
Cement Concrete (1:4:8) using 40 mm size well graded HBG metal for foundations including cost and conveyance of all materials, all leads and lifts, consolidation, curing etc.,complete for finished item of work ( Base concreting ) ( including seignorage charges )
Construction of R.R.masonry in C.M(1:6) using hard granite including cost conveyance of all materilas, seignoirage charges, labour charges, operational, incidental charges etc., complete for finished item of work.
Brick masonry CM (1:6) mix using well burnt country bricks including cost and conveyance of all materials and labour charges etc.complete
Flush pointing with CM (1:3) including cost and conveyance of all materials and labour charges etc., complete
Providing of 150 mm dia DTG Rig borewell at Substation site.
Cost towards drilling of borewell 6" dia with power rig clear in all stratas hard rock, loose soils over harden reaming the bore to suit 150 mm bore well casing pipe and flushing the bore at an average pressure of 100 psi and inserting the casing pipe fixing the coupling conducting yield test including transporting, ground water survey.
Fixing of Casing with heavy duty PVC rigid pipe of 160mm dia double socket PVC/SWR pipe 6Kg/Sq.cm - Prince / Sudhakar / Kisan / Supreme or any other ISI Brand including cost and conveyance of materials, labour charges, leads and lifts etc., complete for finished item of work as directed by the Engineer - In - charge
Erecting, ISI mark submersible 2.0 HP, Single Phase 25 stages pumpset suitable for 106 / 156mm dia borewell with high quality water resistant and dynamically balanced bronze impeller with stainless steel shaft sleeves, pump coupling and pivot of Single phase 250V , 50Hz.. A.C. power supply copper winding with water proof insulation and high precision strength not to be effected by chemical in water and suitable bronze bearings with nut and bolts etc., with necessary H-type clamp of suitable size and strength including Direct - on - Line reputed make starters fitted in sheet metal box size of 265 x 295 x 110mm suitable enclosure for single phase motors up to 3 HP at 220V 50Hz operating range between 80 to 240 Volts with starting and running capacitors assembled with ISI mark contactors and fitted with Legrand make MCB, all operational and incidental charges complete for finished item work as directed by the Engineer-in-charge.
Fixing of 3 Core 4.0 Sqmm Flat Copper cable as per IS 694:1990 for Submersible Motors of reputed makes including cost and conveyance of all materials and labour Charges complete for finished item work as directed by the Engineer-in-charge.
Fixing of Polyethylene water storage tank double layer conforming to IS:12701 - 1996 of 1000 Ltr capacity with lid including cost and conveyance of all misc materials, labour charges etc., complete for finished item of work
Fixing of 32mm dia PE 80 Grade material 12.5 kg / Cm2 ISI Mark HDPE pipe upto 600 feet reputed Makes including cost and conveyance of all Misc materials, labour charges, leads and lifts etc., complete for finished item of work as directed by the Engineer - In - Charge
Fixing of different dia.Unplasticised PVC Pipes,10 kg/cm2 for potable water supplies conforming to IS : 4985/2000 (third revision) with bell ends (Socket) as per specification in light Grey/Natural Ivory Grey/ Any other Color including Labour charges for laying, fixing, and commissioning the pipes including couplers, bends, plugs, junctions, tees etc. with solvent jointing as per Standard practice for finished item work as directed by the Engineer-in-charge.
32mm dia UPVC pipe
25mm dia UPVC pipe
20mm dia UPVC pipe
fixing of GM Gate ( GM peet) valves as per IS 778 Class I -Indian make heavy type of different sizes including cost and conveyance of all materials and labour Charges complete for finished item work as directed by the Engineer-in-charge.
32 mm GM Gate valve
25 mm GM Gate valve
CONSTRUCTION OF TOILET
Earth work excavation (alround) in foundations for building, septic tank, water sump and for levelling and depositing the earth on banks with a initial lead of 10 mt and a lift of 2 mt in mixture of gravel, soft disintegrated rock like shales, ordinary gravel, stony earth and earth mixed with fair sized boulders including shoring, shuttering, sheet planking and dewatering with all leads and lifts, tools and plants, labour, disposal of excess excavted earth etc., complete for finished item of work as directed by the Engineer in charge.
Supply and filling in the foundations and basement with sand, including watering and consolidation thoroughly in 150 mm layers. (including seigniorage charges)
Plain Cement Concrete in (1:4:8) proportion for leveling course in foundations using 40mm size HBG metal from approved quarry including cost and conveyance charges of cement and all other materials to site, all leads and lifts, seigniorage charges, dewatering, labour charges, machine mixing, laying concrete, ramming in 15 cm thick layers, finishing top surface to the required level, curing etc., complete for finished item of work as directed by the Engineer in charge.
Random Rubble stone Masonry in CM(1:6) using Hard granite stones from approved quarry including cost and conveyance charges of cement and all other materials to site and including cost of seigniorage charges, labour charges for cutting stones to required size and shape, mixing of cement mortar, dewatering charges, scaffolding, curing , all leads and lifts etc complete for finished item of work as directed by the Engineer in charge .
Brick masonry for walls in super structure with CM(1:6) with Bricks with traditional size 23 x 11 x 7 cms from approved source having including cost and conveyance charges of cement and all materials to site, seigniorage charges etc. complete for finished item of work as as directed by the Engineer in charge.
Providing of roofing with 0.50mm thick Galvanired/ Prepainted G.I. Profiled sheets fixed to the purlins with 14 size self drilling screws with neoprene washers side laps are stitched with self tapping/drilling screws. End laps are to be sealed with 25x3mm. Butyl tape. The sheets are provided with anti capillary grove.
Supply and fixing of MS Pipe 32mm dia including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work as directed by the Engineer-in-Charge.
Supply and fixing of RCM jali-50mm thick including cost and conveyance of all materials and labour charges etc.complete
Plastering 20mm thick one coat for super structure for ODD faces of walls with in CM (1:5) finishing including cost and conveyance of all materials, seignoirage charges, operational, incidental, labour charges such as scaffolding, mixing curing leads, lifts etc., complete for "UNEVEN FACES OF WALLS"
Plastering 12 mm thick in one coat for superstructure for "EVEN FACES OF WALLS" with CM(1:5) with smooth finish at all heights including cost and conveyance charges of cement and all other materials to site, scaffolding charges, seigniorage charges, incidental and operational charges, all labour charges for mixing mortar, finishing, all leads and lifts, curing, cutting grooves etc., complete
Flooring with Anti skid ceramic floor tiles, 7.3mm thick 1st quality of approved shades set over base coat of cement mortar (1:8), 12 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, sand water and tiles etc., complete for finished item of work.
Dadooing in toilets and bath rooms with glazed red or white full body ceramic wall tiles of size 200 x 300 mm / 245 mm x 325 mm and thickness 6 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs set over a base coat of CM(1:3) 12 mm thick with neat cement slurry of honey like consistency spread at the rate of 3.3 Kgs per Sqm and filling the joints with white cement paste mixed with pigment of matching shade is to be done including cost and conveyance charges of cement and all other materials to site, seigniorage charges, incidental and operational charges, all labour charges for mixing mortar, finishing, all leads and lifts, etc., complete for finished item of work and as directed by the Engineer in charge.
BISON LAM (Pre laminated Cement Bonded Particle Board) SINGLE DOOR SHUTTERS - Supply and fixing of BISONLAM door shutter made out of U sections of size 12x14x12 made from 0.6mm thick pps sections with 12MM BISONLAM with necessary screws fixed at every 1’.0”interwells. The hardware consists of 250mm long aldrop – 2 Nos.150mm Handle- 1 No , 150 mm long ms powder coated tower bolt 1 no. nickle coated and all other required hardware inclusive of all incidentals, labor transportation chargesetc. complete for finished item of work.
Supplying and fixing 580 mm x 440 mm size colour glazed orissa pan of W.C 1st quality ISI marked conforming to IS:2556-Part-3-1981 with "P" or "S" trap Hindware/ Parryware/Neycer - ISI Mark: including cost and conveyance of water closet, P or S trap and all other materials, labour charges for fixing etc., complete for finished item of work as directed by the Engineer in charge of work.
Supply and fixing of CP Short body bib cock fancy type delux heavy duty 12.7mm dia Indian reputed make including cost and conveyance of all materials, labour charges etc., complete for finished item of work as directed by the Engineer - In - Charge
Supply and fixing of 25mm G.I. Pipe nominal bore GI pipe medium grade properties and weight as per IS 1239 with GI fittings including the cost of pipe and its fittings and labour charges complete.
White washing two coats with Surya cem of approved quality to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials including cost of all materials, labour charges and incidental such as scaffolding, lift charges etc., complete for finished item of work.
Supply and fixing of Kadapa slabs of 40mm thick for racks including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work as directed by the Engineer-in-Charge.
Septic Tank
Fixing of RCC Rings, RCC Lid 1.22mt. dia and packing the joints neatly with CM (1:3) 12mm thick Inculding C/c all materials and labour charge etc., complete
1.22mt. Dia Rings
1.22mt. Dia Lid
Cement Tubs
Fixing in walls,ground different dia PVC Pipes of Prince or sudhakar or equivalent make for sewer lines including cost and conveyance of PVC Pipes, specials, PVC cowls labour charges etc complete.
a) Vent Pipe 75mm dia
b) 110mm dia.PVC Pipe
Constrcution of Compound wall arround the substation.
Earth work excavation
Earth work
Augoring & borning
Filling of sand below and sides of the foundation
Plain cement concrete 1:4:8 propotion
RCC footing, plinth beams, columns
a) Under reamed piles
b) Plinth beam
c) Columns
Re-inforcement steel
Masanary work in CM (1:6) proportion with red clay brick solid block of size 23X11X7 CMS AS PER ssr 2014-15
Plastering 12mm thick even faces of walls with (1:5) with smooth finish
Plastering 20mm thick uneven faces of walls with (1:5) with smooth finish
Painting the walls two coats of plastic emulsion grade-1
FORMATION OF WBM APPROACH ROAD
Collection and supply of gravel including stacking at site for premeasurement etc., complete.
Spreading gravel of 150 mm thick for embankmentwatering and consolidation with power roller (8 to 10 tons capacity) rolling including here charges of rollerbarricading etc., complete.
Collection and supply of 65 mm HBG metal and stacking at site for pre-measurements etc., complete.
Spreading of 65 mm HBG metal 150 mm thick compacted to 100 mm thick including spreading gravel for bending, sectioning, watering and rolling with power roller of 8-10 tons capacity as per IS
33KV Line
UG Cable
Excavation of cable trench from road level and filling with sand of 100 mm and Laying, testing & Commissioning of 33 KV 3 X 400 Sq.mm XLPE UG Cable on cable trench and covering the cable with V trough as protective cover, over the V trough filling with sand of 100mm ,providing warning tape and backfilling the trench with earth, leveling removing the debris if any including the other materials wherever the required depth is not obtained due to field conditions as per the instructions of Engineer-in-Charge.
Single run - Trench size of width 0.50mts X and 1.2 mtrs depth
Double run - Trench size of width 0.60mts X and 1.2 mtrs depth
Jointing, testing & commissioning of Straight Through type for 33KV, 3cx400Sqmm, XLPE armoured cable heat shrinkable cable jointing kits
Jointing, testing & commissioning of end termination outdoor type for 33KV, 3cx400Sqmm, XLPE armoured cable heat shrinkable cable jointing kits
Erection, testing & commissioning of 33KV Line type Lightening arrestors including other materials
Erection, installation of 300mm DWC/GI Pipe thickness 5mm
33KV Line
3 Nos. of M+6 Tower For 33 KV Line
Fabrication of tower parts as per specification
Howring and Excavation of pit including dewatering plankingshowring and shuttering and leveling inall types of soils such as BC ,red, hard gravel etc., (Size 1.6X1.6X3.5 Mtrs)
RCC Footings, plinth beams, walls, columns, beams, lintles, roof slab, stair case slab and sun shades by laying vibrated R.C.C M20 grade (1:1.5:3) design mix using 12mm to 20mm size graded HBG machine crushed metal (50% each) from approved quarry and a minimum of 400 Kgs of cement for 1 Cum of concrete including cost and conveyance charges of cement and all other materials to site, scaffolding charges, centering, shuttering, machine mixing, laying concrete, curing, vibrating, all incidental and operational charges, all leads and lifts etc., and including its fabrication complete for finished item of work as directed by the Engineer in charge but excluding cost of steel.
Erection of tower parts completely as per specification including erection of insulators with all accessories, Jumpering, Transport of materials and bolt and nuts etc.,
Track welding of total tower nuts and bolts
Pipe earthing of towers with 80 mm dia CI pipe Including cost of bentonite powder, cement collar and GI Flat of 25mm X 4mm etc.,
Supply & Fixing of 11 KV Danger Board
Providing Anticlimbing arrangment with GI Barbared wire for M+6 tower up to height of 10 feet including cost of materials and Labour
Transport of materials to site including loading and unloading
3 Nos. of M+9 Tower For 33 KV Line
Fabrication of tower parts as per specification
Howring and Excavation of pit including dewatering plankingshowring and shuttering and leveling inall types of soils such as BC ,red, hard gravel etc., (Size 1.6X1.6X3.5 Mtrs)
RCC Footings, plinth beams, walls, columns, beams, lintles, roof slab, stair case slab and sun shades by laying vibrated R.C.C M20 grade (1:1.5:3) design mix using 12mm to 20mm size graded HBG machine crushed metal (50% each) from approved quarry and a minimum of 400 Kgs of cement for 1 Cum of concrete including cost and conveyance charges of cement and all other materials to site, scaffolding charges, centering, shuttering, machine mixing, laying concrete, curing, vibrating, all incidental and operational charges, all leads and lifts etc., and including its fabrication complete for finished item of work as directed by the Engineer in charge but excluding cost of steel.
Erection of tower parts completely as per specification including erection of insulators with all accessories, Jumpering, Transport of materials and bolt and nuts etc.,
Track welding of total tower nuts and bolts
Pipe earthing of towers with 80 mm dia CI pipe Including cost of bentonite powder, cement collar and GI Flat of 25mm X 4mm etc.,
Supply & Fixing of 11 KV Danger Board
Providing Anticlimbing arrangment with GI Barbared wire for M+9 tower up to height of 10 feet including cost of materials and Labour
Transport of materials to site including loading and unloading
3 Nos. of M+12 Tower For 33 KV Line
Howring and Excavation of pit including dewatering plankingshowring and shuttering and leveling inall types of soils such as BC ,red, hard gravel etc., (Size 1.6X1.6X3.5 Mtrs)
RCC Footings, plinth beams, walls, columns, beams, lintles, roof slab, stair case slab and sun shades by laying vibrated R.C.C M20 grade (1:1.5:3) design mix using 12mm to 20mm size graded HBG machine crushed metal (50% each) from approved quarry and a minimum of 400 Kgs of cement for 1 Cum of concrete including cost and conveyance charges of cement and all other materials to site, scaffolding charges, centering, shuttering, machine mixing, laying concrete, curing, vibrating, all incidental and operational charges, all leads and lifts etc., and including its fabrication complete for finished item of work as directed by the Engineer in charge but excluding cost of steel.
Erection of tower parts completely as per specification including erection of insulators with all accessories, Jumpering, Transport of materials and bolt and nuts etc.,
Track welding of total tower nuts and bolts
Pipe earthing of towers with 80 mm dia CI pipe Including cost of bentonite powder, cement collar and GI Flat of 25mm X 4mm etc.,
Supply & Fixing of 11 KV Danger Board
Providing Anticlimbing arrangment with GI Barbared wire for M+12 tower up to height of 10 feet including cost of materials and Labour
Transport of materials to site including loading and unloading
Erection of 33KV lines over 12.5m Spun poles
Excavation of pole pit of size 0.75x0.75x2.1 Mtrs for 12.5Mts SPUN poles including dewatering, shoring and shuttering where-ever necessary and back filling the pits and ramming (after erection of pole) with excavated earth/extra earth/ excavated rock bits if any and leveling the site as per technical specification in section-5 without any lead. All soils except hard gravel, hard morum and hard rock/ disintegrated rock
Excavation of Stay pits of size 0.45x 0.45x1.34 Mtrs for burying anchor rods with the anchor plates for stay sets including dewatering, shoring & shuttering wherever necessary and back filliing and ramming (after burrying of anchor rods with anchor plate), the pits with excavated earth/extra earth / excavated rock bits if any and leveling the site as per technical specification without any leads In all soils except hard gravel, hard morum and hard rock/disintegrated rock
Excavation of strut pit of size 0.5x0.5x1.5Mtrs for 9.1Mts PSCC poles including dewatering, shoring and shuttering where-ever necessary and back filling and ramming the pits with excavated earth/extra earth/excavation rock bits if any and leveling the site after erection of strut as per technical specification without any lead In all soils except hard gravel, hard morum and hard rock/ disintegrated rock
Erection of 12.5Mtrs.Spun poles including earth coils, cross arms/side arm, top cleats, insulators complete with hardware wherever necessary (but excluding the cost of pit excavation, concreting and backfilling)
Erection of stay sets with Guy Insulator & 7/3.15mm GI Stay wire complete including fixing of bow, fixing and binding of eye bolt, anchor rod, guy insulator thimbles as per clause 10 of section 5 exluding the cost of pit thinples excavation, concreting and back filling.
Erection of 9.1Mtrs/280Kg WL PSCC poles as struts complete including fixing of strut clamps and cost of pole excluding the cost of pit excavation, concreting and back filling
Concreting the location (after erecting the pole/stay) with 1:3:6 cement concrete with 20mm HBG metal including cost of all the materials and curing, dewatering the pits before and after concreting viz., dry, wet, partially submerged, fully submerged, rocky for base concreting 20 mm H.B.G. metal to be used. Concreting of Spun pole location including base concreting of size .75x0.75x2.1Mts.(0.1 Mt for basse concreting)
Concreting the location (after erecting the pole/stay) with 1:3:6 cement concrete with 20mm HBG metal including cost of all the materials and curing, dewatering the pits before and after concreting viz., dry, wet, partially submerged, fully submerged, rocky Concreting of strut location as per section-5 of size 0.5x0.5x1.5Mtrs.
Concreting the location (after erecting the pole/stay) with 1:3:6 cement concrete with 20mm HBG metal including cost of all the materials and curing, dewatering the pits before and after concreting viz., dry, wet, partially submerged, fully submerged, rocky.Concreting of stay location of size 0.45x0.45x1.34 Mtrs
Erection of line DP structure with poles as per drawing enclosed at various locations including supply and erection of 6nos polymer insulators with hard ware and 3Nos. 33KV pin insulators with pins including jumpering providing suitable size alluminium T' clamps (but excluding pit excavation and concreting of poles) including supply and erection of 1 No. GI earth pipe with flange (40mm dia, 1.8Mt long) as per drawing, double earthing should be done for all the structure parts including AB switch with 4mm GI wire and coil earthing is to be done for AB switch handle erection of earth pipe and supply and refiling the earth pit with bentonite compound and black cotton soil (in 1:6 ratio) and giving connections as per departmental standards as per drawing enclosed spun pipe of 2 feet dia. and 2 feet height shall be provided around each earth electrode and all the earth wires should run through 1"dia PVC pipe 3' above the ground level and 2' below the grond level along the pole (wherever alluminium feerules are used, alluminium tape is to be wound over the conductor to have better grip). Line D.P. with A.B.Switch with 12.5 Mts Spun poles
Paving out the 100Sqmm AAA conductor & supply of connected other materials including transport charges to the work location, loading & unloading charges, stringing duly arranging temporary guys, jointing, clamping, jumpering, pin binding, tensioning and strain insulator binding etc. comprising of three conductors including cost of all the materials duly maintaining ground clearances as per technical specification Note : One route KM means three KM lengths of single conductor.
Supply and fixing of danger Boards
Vertical Formation: Erection of pole and Supply & fixing of 6 Nos. of polymer strain insulators with metal parts with Horizontal cross arms with 100x50mm channel, 75x8mm back clamps, and double jumpering & providing alluminium 'T' clamps of suitable size excluding cost of pit excavation, concreting, back filling and stay set/strut pole (wherever alluminium 'T' clamps are used, alluminium tape is to be wound over the conductor to have better grip) With 12.5 Mtrs Spun Poles
Single Pole cut point : Supply & erection of pole and supply & fixing of 2Nos. 6ft, 100x50mm channel horizantal cross arms supported by 65x65x6mm MS angle as struts, fish plates, 6 Nos. of Polymer strain insulators with metal parts, back clamps and jumpering with support of 3Nos. 33KV pin insulators with pins and providing aluminium 'T' clamps of suitable size but excluding cost of pit excavation, concreting, back filling and stay set/strut pole (wherever alluminium ferrules are used, aluminium tape is to be wound over the conductor to have better grip) With 12.5Mtrs Spun Poles
Single Pole angle cut point including supply & erection of pole and supply & fixing of 4Nos. 6ft, 100x50mm channel horizantal cross arms supported by 65x65x6mm MS angle as struts, MS Flat for fish plates &Back clamps, 6 Nos. of Polymer strain insulators with metal parts and jumpering with support of 3Nos. 33KV pin insulators with pins & providing aluminium 'T' clamps of suitable size but excluding cost of pit excavation, concreting, back filling and stay set/strut pole (wherever alluminium ferrules are used, aluminium tape is to be wound over the conductor to have better grip) With 12.5Mtrs Spun Poles
Fixing of tapping cross arms (2Nos. 6ft, 100x50mm channel horizantal) supported by 65x65x6mm MS angle as struts on either sides, fish plates with MS Flat 75x8mm, back clamps, and 3 Nos. of Polymer strain insulators with metal parts and jumpering & providing alluminium 'T' clamps of suitable size at the tapping/dead end locations of the 33KV line (wherever alluminium ferrules are used, aluminium tape is to be wound over the conductor to have better grip)
Fixing of 3 Nos. of Polymer Strain insulators with metal parts for all the three phases at substation end including double jumpering and providing alluminium 'T' clamps of suitable size (wherever alluminium 'T' clamps are used, alluminium tape is to be wound over the conductor to have better grip)
Numbering of poles with white paint and AC black paint as back ground
Erection of LT 3-Ph cross arms LT pin insulator complete with hardware wherever necessary on existing poles
Erection of Side arm with strut angle OR V cross arm and H x arm with A type pedastal, pin insulator complete with hardware wherever necessary on existing pole (11KV line)
11KV Line
UG Cable
Excavation of cable trench from road level and filling with sand of 100 mm and Laying, testing & Commissioning of 3x185Sqmm, 11KV, XLPE UG Cable on cable trench and covering the cable with V trough as protective cover, over the V trough filling with sand of 100mm ,providing warning tape and backfilling the trench with earth, leveling removing the debris if any including the other materails wherever the required depth is not obtained due to field conditions as per the instructions of Engineer-in-Charge.
Single run - Trench size of width 0.50mts X and 1.2 mtrs depth
Double run - Trench size of width 0.60mts X and 1.2 mtrs depth
Erection, testing, commissioning of Straight Through type for 3x185Sqmm, 11KV, XLPE armoured cable heat shrinkable cable jointing kits
Erection, testing, commissioning of end termination outdoor type for 3x185Sqmm, 11KV, XLPE armoured cable heat shrinkable cable jointing kits
Erection, installation of 300mm DWC/GI Pipe thickness 5mm
Erection of 11KV lines over 11M Spun poles
Excavation of pole pit of size 0.6x0.6x1.75Mtrs including dewatering, shoring and shuttering where-ever necessary and back filling the pits and ramming (after erection of pole) with excavated earth/extra earthy/ excavation rock bits if any and leveling the site without any leads.All soils including hard gravel, hard morum and hard rock/disintegrated rock
Excavation of Stay pits of size 0.45x 0.45x1.34Mtrs (0.272Cum) for burying Anchor rods with the anchor plates for stay sets including dewatering, shoring & shuttering wherever necessary and back filling and ramming (after burrying of anchor rods with anchor plate), the pits with excavated earth/ extra earth / excavated rock bits if any and leveling the site without any leads.In all soils including hard gravel, hard morum and hard rock/disintegrated rocks.
Excavation of strut pit of size 0.45x0.45x1.34Mtrs including dewatering, shoring and shuttering where-ever necessary and back filling and ramming the pits with excavated earth/extra earth/excavation rock bits if any and leveling the site after erection of strut as per technical specification without any lead.In all soils including hard gravel, hard morum and hard rock/disintegrated rock
Erection of 11 Mtrs Spun poles including earth coils, cross arms/side arms, top cleats, pin insulator complete with hardware wherever necessary (but excluding the cost of pit excavation, concreting and back filling)
Erection of line DP structure with 2Nos. 11 Mtrs. Spun poles, 4 Nos 100 x 50 mm channel 6 feet with 50 x50 x 6 mm MS angle 9 feet with struts/Stays as per drawing enclosed at various locations including supply and erection of 11KV Polymer string insulator with hard ware, 11KV pin insulators with pins including single jumpering providing suitable size alluminium 'T' clamps including supply and erection of 1 No. GI earth pipe with flange (40mm dia, 1.8Mt long) as per drawing (but excluding cost of pit excavation,concreting of poles and struts/Stays), double earthing should be done for all the structure parts including AB switch with 4mm GI wire and coil earthing is to be done for AB switch handle, erection of earth pipe and supply and refiling the earth pit with bentonite compound and black cotton soil (in 1:6 ratio) and giving connections as per departmental standards as per drawing enclosed Cement Collar of 2 feet dia. and 2 feet height shall be provided around each earth electrode and all the earth wires should run through 1"dia PVCpipe 3' above the ground level and 2' below the grond level along the pole (wherever alluminium feerules are used, alluminium tape is to be wound over the conductor to have better grip) Line D.P. with AB Switch
Erection of MS stay set with HT Guy insulator & 7/3.15mm GI Stay wire complete including fixing of bow, fixing & binding of eye bolt, anchor rod, guy insulator excluding the cost of pit excavation, concreting and back filling
Erection of 9.1 Mtrs PSCC poles as struts complete including fixing of strut clamps excluding pit excavation, concreting and back filling
Concreting the locations one in every five locations and cut points VFs, stays & DPs with 1:3:6 mix cement concrete with 20mm HBG metal including cost of all the materials and curing dewatering the pits before and after concreting viz., dry, wet partially submerged, fully submerged, rocky For base concreting 20mm H.B.G. metal to be used for 0.1Mt
Concreting of pole location including Base concreting of size 0.6x0.6x1.75Mtrs
Concreting of stay location of size 0.45x0.45x1.34Mtrs (for all locations)
Concreting of strut location of size 0.45x0.45x1.34Mtrs
Paving out the 100sqmm conductor including transport charges from the store to the work location and including loading and unloading charges and stringing duly arranging temporary guys, jointing, clamping, jumpering, pin binding, tensioning and strain insulator binding etc. comprising of three conductors including cost of all the materials duly maintaining ground clearances as per technical specification and providing suitable alluminium double ferrules (inner & outer) wherever midspan jointing is required. (wherever alluminium feerules are used, alluminium tape is to be wound over the conductor to have better grip) 100Sq.mm All Aluminium Alloy Conductor. (One Route KM means 3KM length of single conductor)
Supply and Fixing of danger Boards
Vertical Formation: Erection 11 Mts Spun poles and supply & fixing of 6 Nos.11KV Polymer string insulator C&T type with metal parts, 3Nos. 11KV pin insulators with pins to horizantal cross arms (100x50mm), top cleat and back clamps. Clamping, double jumpering and providing alluminium 'T' clamps of suitable size excluding cost of pit excavation, concreting, back filling and stay set/strut pole (wherever alluminium 'T' clamps are used, alluminium tape is to be wound over the conductor to have better grip)
Single Pole cut point: Erection of 11 Mts Spun pole and Supply & fixing of 6 Nos. Polymer string insulator C&T type with metal parts, 3Nos. pin insulators with pins to 2Nos. 5ft, 100 x 50 mm horizantal cross arms supported by 50x50x6mm MS angle as struts and fish plates and back clamps etc., double Jumpering & providing alluminium 'T' clamps of suitable size but excluding cost of pit excavation, concreting, back filling and stay set/strut pole (wherever alluminium feerules are used, alluminium tape is to be wound over the conductor to have better grip)
Angle cut point: Erection of 11Mtrs Spun poles with struts/stays and Supply & fixing of 6 Nos. Polymer string insulator C&T type with metal parts, 3Nos. pin insulators with pins to 2Nos. 5ft, 100 x 50 mm horizantal cross arms supported by 50x50x6mm MS angle as struts and fish plates and top cleat, back clamps etc., double Jumpering & providing alluminium 'T' clamps of suitable size but excluding cost of pit excavation, concreting, back filling and stay set/strut pole (wherever alluminium feerules are used, alluminium tape is to be wound over the conductor to have better grip)
Fixing of tapping cross arm (horizantal) supported by 50x50x6mm MS angle as strut, back clamps, 3Nos. 11KV Polymer string insulator with metal parts, double jumpering with support of pin insulators & providing alluminium 'T' clamps of suitable size at the tapping/dead end locations of the 11KV line (wherever alluminium 'T' clamps are used, alluminium tape is to be wound over the conductor to have better grip)
Fixing of 3 Sets of Polymer string insulator with metal parts for all the three phases at substation end including double jumpering and providing alluminium 'T' clamps of suitable size (wherever alluminium 'T' clamps are used, alluminium tape is to be wound over the conductor to have better grip)
Numbering of poles with white paint and AC black paint as background
Erection of Side arm with strut angle OR V cross arm and Horizontal x arm with A type pedastal, pin insulator complete with hardware wherever necessary on existing pole
Erection of LT 3 phase cross arm LT pin insulators complete with hardware wherever necessary on existing pole
Erection of UG Cable at Railway Crossing (4 Crossings)
300mm dia digging by boaring technique method in railway boundary upto DP as per railway standards
Laying of 300mm dia 5mm thick GI pipe under the railway track upto DP by boaring technique method with complete welding work for pipes as per railway standards
Laying of 3X400 Sq.mm UG cable upto DP
Laying of extra cable by rings
Erection of 125mm dia 3mm thick MS pipes vertically from bottom to top of DP & laying of 3X400 Sq.mm cable through pipes in complete shape
Erection of out door pipe heat shrinkable jointing kits of 3X400 Sq.mm cable
Fixing of sign boards indicating 33KV crossing with concrete plinth
Excavation of earth pit, putting cast iron pipe with flange on one end (as per ISS 718/74) of nominal inner dia 80 mm, 9.5mm thickness and 2.75 meters long. inside the pit and back filling the pit with bentonite powder and soil with ratio 1:4 including cost of C.I pipe, cement collar, bentonite compound etc., and labour charges complete (as per the Sketches).
Supply & Running of 50*6 mm earth flat, connecting to all the earth pits and equipments, with G.I bolts & nuts, welding duly fixing to supports neatly with suitable size of clamps
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid