SPL REPAIR TO ROAD, FOOTPATH, HARDSTANDING AT ZONE-1, 1A AND INTERNAL ROAD FROM RP GATE TO OR LIVING AT BIHUGURI UNDER GE (S) TEZPUR

Surface dressing of soft/loose soil n exc 15 CM deep at road side berm complete all as specified and directed

Removing of excavated surplus soil not exceeding 50m and depositing where as directed at a level not exceeding 1.5m above the staring point.

M&L for 75 mm spread thickness Moorum/ red bajri spread, rolled and consolidated to gradient and camber required

M&L Premix bituminous, macadam using paving bitumen grade VG-30 any penetration content @ 4% by weight of total mix laid /rolled and compacted to required gradient and camber with 8-10 tonne power roller and rolled to a uniform smooth surface (any consolidated thickness) complete all as specified and directed. Notes:- The contractor's quoted rates shall also be deemed to include the following elements: (i) The contractor shall get the mix design done through National Test House, SEMT wing CME, Regional Research Labs, IITs, National Institutes of Technology, Govt Engineering College or any Govt laboratories and the same shall be got approved from the GE before providing Bituminous Macadum. (ii) If actual design mix comes less than 4% binder content, then the rate of recovery of bitumen shall be as per rate in purchase vouchers per kg for the purpose of adjustment. However, no adjustment shall be made if the binder content is required more than 4%.

M&L for preparing existing black top surfaces of road by brushing with wire brushes for removing caked mud etc sweeping with brooms and finally fanning the cleaned surfaces with gunny bags to remove all loose dirt etc complete all as specified and directed.

M&L for Applying tack coat of cationic bitumen emulsion RS -I confirming to IS:8887 @ 2.5 Kg/ Per X Sqm using mechenical sprayer complete in all respect complete all as specified & directed.

M&L for Bituminous premix semi-dense asphaltic concrete (SDAC) 40 mm consolidated thickness with 5.5% binder content of which (Paving bitument VG 30 @ 92 % and 8 % waste plastic) by wieght of total mix providing and laying with mechanical paver and compacted with 8 to 10 tonne capacity power roller to required gradient and camber complete all as specified and directed. Notes:- The contractor's quoted rates shall also be deemed to include the following elements: (i) The contractor shall get the mix design done through National Test House, SEMT wing CME, Regional Research Labs, IITs, National Institutes of Technology, Govt Engineering College or any Govt laboratories and the same shall be got approved from the GE before providing Bituminous Macadum. (ii) If actual design mix comes less than 5.5% binder content, then the rate of recovery of bitumen shall be as per rate in purchase vouchers per kg for the purpose of adjustment. However, no adjustment shall be made if the binder content is required more than 5.5%.

M&L for Preparing bituminous surfaces of road and making 2.5mm thick centre lines, stops lines, dashes, arrows etc and the like n. exc 10 cm wide on roads pavements with hot applied thermo plastic road marking paint of approved colour confirming to BS 3262-1989 with @ 5 Kg/Sqm and applying glass beads @ 300 gms/Sqm over painted surfacesspecial applicator machine aal as per manufacturers instruction complete all as specified and directed.

S & F in repairs Supply and fixing cat eye solar reflective type of metal body alloy of size 100mm x 100mm x 20mm with PAMA striplens reflector of model No. DA 972.0 fixed with and incl MS stud of suitable size as per manufactures instructions.

S&F in repair Supply and fix solar cat eye aluminum alloy shall (100% water proofing design according to 65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency Mono rystafie solar panel 2.4V/ 0.3 watt one NI-ed rechargeable battery (1.2V/ 1600MA) consisting of super bright LED with 10,000 to 18,000 mcd completed as per manufactures instructions etc. all as specified and directed