ADDN / ALTN OF ENTRANCE AREA AND COURT YARD OF CG SHOPPING COMPLEX, PROVN OF SCREEN WALL FOR OFFICERS MARRIED ACCOMMODATION AND ADDITION / ALTERATION TO SOLAR POWER PLANT CONTROL ROOM AT CGDHQ - 01 PORBANDAR UNDER GE I CG) PORBANDAR

Amount

SCHEDULE 'A'

Excavation in trenches, n exc 1.5m wide and n exc 1.5m in depth; for foundation, etc. or for shafts, wells, cessipts, manholes, pier holes, etc. n exc 10 Sqm on plan and n exc 1.5m in depth and getting out in soft/disintegrated rock.

Excavating over areas, n exc 1.5m deep and getting out Soft/loose soil

Excavation in trenches not exc 1.5 m wide and not exc 1.5m in depth and getting out Soft/ Loose soil complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm thick using excavated material all as specified.

Removing excavated material to a distance n exc. 50 m and depositing where directed at a level n exc. 1.5 m above the starting point all as specified and as directed by engineer-in-charge.

M&L Hardcore of guage n.exc. 63mm, deposited spread & levelled in layers n.exc.15CM thick, watered & rolled/ rammed to a true surface using broken stone or boulders all as specified and as directed by engineer-in-charge.

M&L Plain cement concrete, type D2, (1:4:8, using 40mm graded stone aggregates) as in foundation, filling and mass concrete etc all as specified and as as directed by engineer-in-charge.

M&L Porbandar stone masonary, block in course, well bonded and bedded, built in CM 1:6 all as specified and as directed by engineer-in-charge.

M&L RCC nominal mix type A1, (1:1.5:3, using 20mm graded stone aggregates) as in foundation including raft footing foundation beam plinth beam bases for columns etc basement slab under reamed piles and mass concrete Note: The proportioning of cement and aggregate for mixing by weight shall be as directed by the Engineer-in-charge.

M&L RCC nominal mix type A1, (1:1.5:3, using 20mm graded stone aggregates) as in Columns,pillars,piers, posts and struts Note: The proportioning of cement and aggregate for mixing by weight shall be as directed by the Engineer-in-charge.

M&L RCC nominal mix type A1, (1:1.5:3, using 20mm graded stone aggregates) as in chajjas, floors, roofs, landings, blaconies, canopies, deck slabs and in shelves and the like. Note: The proportioning of cement and aggregate for mixing by weight shall be as directed by the Engineer-in-charge.

M&L RCC nominal mix type A1, (1:1.5:3, using 20mm graded stone aggregates) as in beams,cantilevers, bressumers and lintels over 1.5 mtr span complete all as specified and directed by Engr-in-charge. Note: The proportioning of cement and aggregate for mixing by weight shall be as directed by the Engineer-in-charge.

M&L RCC nominal mix type A1, (1:1.5:3, using 20mm graded stone aggregates) as in slabs supported onwalls, beams and colums in floors, roofs, landings, balconies, canopies ,deck slabs and in shelves and Stair case riser, tread and waist slab the like complete all as specified and directed by Engr-in-charge Note: The proportioning of cement and aggregate for mixing by weight shall be as directed by the Engineer-in-charge.

Formwork to sides of concrete foundations, footings,bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work;vertical or to batter,curved, as in rough finished surfaces of concrete complete all as specified and as directed by engineer-in-charge.

Formwork to sides of pillars, posts, struts, piers, columns (square, rectangular or polygonal) as in fair finished surfaces of concrete complete all as specified and as directed by engineer-in-charge.

Formwork to sides and soffits of floor or roof beams,beam haunchings, girders, bressumers, lintels, cantilevers, shelves including supports, overhangs, chajjas etc also splays between floor and beam and the like for fair finished surfaces of concrete etc complete all as specified and directed by Engr-in-charge.

Formwork to soffits of suspended slabs such as roof slabs, floor slabs, roof beam, landings and similar work; not exceeding 200m thick for fair finished surface (Horizontal or sloping) etc complete all as specified and directed by Engr-in-charge.

Formwork to staircases with sloping or stepped soffits including risers and stringers (excluding landing) etc complete all as specified and directed by Engr-in-charge.

M&L Mild steel CRS TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire annealed not less than 0.9mm dia or securing with clips. etc complete all as specified and directed by Engr-in-charge.

M&L Mild steel CRS TMT bars 6 to 8 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire annealed not less than 0.9mm dia or securing with clips. etc complete all as specified and directed by Engr-in-charge.

All as per above item No.20.00 but 5mm dia and over upto 10mm dia as in stirrups, spacers and binders etc complete all as specified and directed by Engr-in-charge.

S & F Roof trusses (framed), trussed purlins crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle channel or flat iron sections) including distance pieces, cleats etc.FE 410-W (Gde E- 250) Quality A complete al as specified and as directed.

S & F steel work in tubular trusses, purline, rafter, vertical pole including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S 1161-1979 grade St.-240

S & F 2mm thick Fibre glass reinforced translucent plain sheeting side lap 150mm fixed with coach screw and washer in roof, wall etc completed all as specified and directed by Engineer-in-charge.

M & L for powder coated Aluminium frame and shutter for sliding & openable, door, windows & ventilators (movable louvers type) with one or more rebates including joining cleats for fixing etc. Rubber gasketting all round the panels / shutters to fix glass, PVC gasketting in all channels, locking arrangement, (minimum thickness of powder coating 60 micron for windows and ventilators with natutal matt fininsh) complete all as specified and directed. Note :- (i) Glass to be measured and paid separately under respective of work. (ii) Items shall be paid as per weight of aluminium section. (iii) The quoted rate shall be inclusive of rubber gasket/ PVC gasket, glazing clips, screws etc as required which shall not be measured for arriving the weight. (iv) The rate shall be inclusive of the locking arrangement including complete packing with silicon gel arround contacting surface of aluminium work]

S&F Aluminium grill with suitable aluminium anodised frame F/H section manufactured by M/s DECO GRILL as per design No DG-104, 100mm x 5.5mm to 6.5 mm thick with necessary channels and clips complete all as specified and as directed by Engr-in-Charge,

M&L Virified tiles 8 to 10 mm thick light shade (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and hite or coloured cement to match not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry over screed bed of 15 mm thick 1:6 and pointed in white or coloured cement to match as in floor including dismantling complete all as specified and as directed by the Engineer-in-Charge. Make:- Somani ,Orient Bell, kajaria.

All as item above but over screed bed or bedding layer 10mm thick 1:4 on vertical surfaces/skirting complete all as specified and as directed

M & L Glazed ceramic tiles in vertical surfaces 300x450mmx7mm thick including over 10mm thick rendering of cement mortar (1:4) for laying floor finishes set and jointed in neat cement slurry and pointed in white or coloured cement to match including dismantling complete all as specified and as directed by the Engineer-in-Charge. Make:- Somani ,Orient Bell, kajaria.

M&L Rendering in cement mortar 1:6, 15mm thick on fair face of brick work and finised even and smooth without using extra cement at any posotion incuding taking down cement plaster on stone wall & roof slab including raking out joints, hacing for key, scrubbing down with water, etc complete all as specified and as directed

M&L Rendering on wall 15mm thick in CM 1:4 on fair faces of brick work or concrete surfaces finished fair and even without using extra cement.

M&L Preparation of new plastered surfaces of walls and applying two coats of cement based paint over a coat of primer complete all as specified.

M&L Preparation of newly plastered surfaces of wall and applying Two coats of OBD over a coat of chalk white primer complete all as specified and as directed by Engr-in-Charge. MAKE : OBD - Asian paint tractor emulsion, Berger Commando or equivalent in Nerolac Primer : Asian, Berger or equivalent

S&F 5mm thick glass sheet ordinary quality and glazing with oil putty fixed with beads n.exc 0.5Sqm in each pane complete all as specified and as directed

M & L for preparing new steel surfaces of any description, not otherwise described over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of pink primer of approved shade complete all as specified and as directed by Engr-in-Charge.

S&F Aluminium xpm wire mesh 0.45 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with wooden beads complete as specified and directed by EIC.

M&L preparation of new steel surfaces of any description, over 10cm width or girth and applying two coats of epoxy paint over a coat of red oxide primer complete all as specified and as directed.

M&L Joint free coloured ceramic tiles 8 to 9 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry over screed bed 15 mm thick 1:6 and pointed in white or coloured cement to match complete all as specified and as directed by Engr-in-Charge.

M&L for 50mm thick Cement concrete type C-1, 1:3:6 (20mm graded aggregate) as in flooring finishing even and smooth without using extra cement.

M&L Rendering on wall 15mm thick in CM 1:4 on brick work or concrete surfaces finished fair and even without using extra cement.

M&L Rendering on ceiling 5 mm thick in CM 1:3 on brick work or concrete surfaces finished fair and even without using extra cement.

M&L providing and fixing of granules textured homogeneous wall finishing system consisting of a two component system of dry granules (25 Kgs per pack) made of 92% silica particles coated with fade resistant pigments, 100% acrylic polymer bonding agent (5 Kgs per pack) with the applied thickness of the coating being between 0.8 mm-1.2mm to be applied on a cured, smooth level plaster without keying as per the shades/combinations approved as per the manufacturers instructions for usages, to be applied by and approved applicator of the manufacturer, as per the directions/supervision of the engineer-in-charge. all complete. The above textured coating should confirm to surface spread of flame class one of BS 476: Part 7: 1971 and pull off strength of the coating to meet JISA 6909 on smooth plastered surface complete all as specified and as manufacturers instructions/specifications-over 15 mm thick plaster (5 mm thick using using WPC in CM (1:4) on 10 mm thick in cm 1:6) finished even and smooth. In case of deviation, the quantity of water proofing compound shall be taken as 3% by weight of cement.

S&F Ready made ornamental Precast reinforced cement concrete type B0 1:2:4 (12.5 mm graded aggregate) designer pillars (Size- 100 x 100 x 900 mm) having groove on two faces, for fixing louvres and jallies, set in CM 1:4 on compound wall. incuding colour all as approved and as directed by Engr-in-Charge. Note : The design of pillar, shall be got approved before bulk procurement . The tenders are advised to visit the site for sample.

M&L 40 mm thick (measured solid) ready made reinforced precast cement concrete type B0 (1:2:4, 12.5 mm graded stone aggregate) louvres and jallies, set in CM 1:4, including all mouldings complete including colour all as specified and as directed by Engr-in-Charge. Note : Contractors are advised to visit the samples held in the office, before submitting tender.

M & L Preparation of new plastered/concrete surfaces of walls applying two coats of exterior acrylic emulsion (weather proof treatment) over two coat of primer, complete all as specified and as directed by the Engineer-in-Charge. ( The tint and shade be as approved by the GE)

M&L for 18-20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including moulding at front edge over screed bed or bedding layer of 15 mm thick 1:6 etc. complete all as specified and as directed by Engr-in-Charge.

S & F Railing using stainless steel pipes, squares etc of hollow section including provision of architechural finials of grade SS 316, etc complete all as specified and directed by Engineer in Charge .

S &F Fabricated Stainless steel gate and Similar Items made out of grade SS-316, to be prepared for hanging or sliding with and including either hooks and hinges or door hanging fittings and hanging, also fastening and fixing complete. Note :- The members of gate shall be bright polished after fixing the gate in position. The welded joints shall be grinded for smooth appearence.

S & F 12mm Thick Toughened Float Sheet glass, fixed in Aluminium section with glazing Chips etc complete all as specified and directed by Engineer in Charge . .

M & L Sand filling under floors or in foundations including watering and consolidation for interlocking paver blocks complete all as specified and as directed by Engr-in-Charge

M & L Machine pressed precast concrete interlocking paver blocks 80mm thick any shape and size conforming to IS 15658-2006 of M-40 Grade with grey cement and no pigment complete and interstices filled with sand complete all as specified and directed by Eng-in-Charge.

M&L Antistatic (Endura / durastone or Equivalant ) 9-10 mm Thick ceramic tiles exceeding 0.06 Sqm but not exceeding 0.11 Sqm set jointed and pointed with neat cement slurry as in floors over and incuding 15mm thick screed bed of CM 1:4 including pointing in white cement with grey cement and pigment to match with the shade of tiles completed all as specified completed all as specified

Demolition of brick /stone masonry built in cement mortar or cement lime mortar and removal of debris from site other than MD land complete all as specified and as directed

Demolotion Cement concrete (unreinforced) Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level)

Demolition of cement concrete of any description and in any position not otherwise specifically provided for.demolised material removed out side of MOD land exc 1.50KM.

Dismantling structural steel work including doors, gates but excluding framed truss etc complete all as specified and as directed.

M&L for 12mm thick Gypsum Board seamless Ceiling as in curved, sunken or raised surface of any design as approved and finishing the surface fair by filling the joint with POP and inlcuding GI frame work for curved, sunken or raised for any design as approved as in ceiling comprising of GI perimeter channel 0.55mm thick with two unequal flanges of 20 and 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre/intermediate channel 0.9mm thick having equal flanges of 15mm each and web of 45mm suspended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exc 1.2m length) of 0.55mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5mm fixed to the intermediate channel at 457mm centre to centre fixed with hanger of GI channel made out of GI channel used in ceiling as above upto 1200 mm length in roof slabs by means of ceiling cleats complete all as specified and directed by Engr-in-charge Note :- Flat area will be measured.

M&L for 12mm thick Gypsum Board seamless Ceiling as in flat surface, finishing the surface fair by filling the joint with POP and inlcuding GI frame work as flat surface approved as in ceiling comprising of GI perimeter channel 0.55mm thick with two unequal flanges of 20 and 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre/intermediate channel 0.9mm thick having equal flanges of 15mm each and web of 45mm suspended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exc 1.2m length) of 0.55mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5mm fixed to the intermediate channel at 457mm centre to centre fixed with hanger of GI channel made out of GI channel used in ceiling as above upto 1200 mm length in roof slabs by means of ceiling cleats complete all as specified and directed by Engr-in-charge

Providing and fixing Aluminum Composite panels in all colours of approved brand for external / internal wall cladding at all heights and elevations including necessary aluminium composite panel consist of 3mm thermoplastic core of anti oxidant LDPE sandwitched between two skin of 0.5 mm thick alloy sheet making a total sheet thickness of 4 mm. The surface shall be finished with PDVF base coating on the top side and service coating on the reverse side shall be with a polymer paint. The system to be fixed to the brick/stone/masonry/RCC walls/framed structure with necessary clamps, bracket and anchor fasteners fixed over and including base frame fabricated with aluminium square pipe of size 25mmx25mm with 1mm thickness in 600mmx600mm size grid including stainless steel screws, nut, bolts, washers, cleats, weather silicone sealent for groove filling, backer rods etc, complete all as per Manufacturer instruction and all as specified and as directed by Engr-in-Charge. All Clamps and brackets shall be hot dip galvanised minimum 80 micron thick and confirmed to IS : 4759 - 1996. The extruded aluminium sections shall be anodised in approved colour with anodic coating minimum 20 microns. (items include cost of aluminium frame, ACP , Cramps, weather sealent, gasket, foam, fixtures, scaffolding, all machineries and any other fastening streps, nuts, bolts, rivets, washers, etc complete). The manufacturer shall also give guarantee/warranty for ACP for a period of Five years. Notes: a) The Contractor should have working experience of similar nature of work for last three years. b) The ACP should have installed by authorized company/agent. Make of ACP:- ALUPEX/ALUDECOR/ALSTRONG

S&F aluminium decorative type powder coated brackets suitable for 20mm dia curtain rod or similar articles and completed all as specified and directed.

S&F 20mm dia aluminium decorative type powder coated curtain rod or similar articles and completed all as specified and directed by Engineer in charge.

S&F door stopper aluminium anodized white dale 40mmx40mm and 2mm thick dia 150mm having rubber bash 25mm dia long (high) at end the sheet/fixed to door shutter with steel cadmium places scrrew all as specified

M&L for complete removal of existing APP membrane and providing APP based membrane course roof treatment in layers with following provisions:- (i) Applying one coat of bitumen's primer polymerized primer oil based coat, evenly @ 0.3KG/Sqm as priming coat to the prepared surfaces, till the surfaces is properly impregnated and the solvent oil in the base primer shall be allowed to evaporated completely. (ii) Applying APP based pre-fabricated with non woven polyester reinforced membrane stabilized with fibre glass strands and top with grey mineral slates 3mm thick and weight not less than 3.50 Kg/Sqm by torch application method. (iii) Applying a coat of solar reflective bituminous aluminium paint @ 0.10Kg/Sqm over mineral surface. etc complete all as specified and as directed by Engr-in-Charge

S&F Writing letters or figures (Block, Roman, Italic or Indian) exc 10 cm and not exc 30 cm high with stainless steel incl chiselling for letters on granite surface and existing letter remove etc complete all as specified and directed by Engineer in Charge .

M&L Preparing of old/new surfaces of walls/ceiling washing the surface thoroughly, filling the cracks, creaves with crack filling compound as suggested by the manufacturers and applying two coats of Rain coat manufactured by Dr Fixit of Piddilte Industries Ltd. (shade to match the existing paint) incl necessary scaffolding for work all as specified and as directed by Engineer in Charge.

Supply, lay & test cable XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cable (heavy duty)with stranded aluminium conductor, 1100 volts grade (Earthed ), of size 4 core 16 sq mm. all as specified and as directed by Engineer-in-Charge Make: havells/Plaza/Finolex

Supply and lay double wall corrugated (DWC) high density polythene pipes having corrugation on the outer wall and plain surface on the inner wall confirming to IS 16205 & IS14930 ( Part I and II) for protection of underground calbes of size 50/38 mm outer dia with all fittings. laid in trenches / road/ nallah or fixed along wall. poles or laid under floor (including cutting floor/Road and making good to match with existing adjoining surface etc for cable protection all as specified (excavation and earth work shall be measured and paid separately) Make: Rex/Poly/Gemini

Supply and fix post top lantern light fitting of 40 Watt, 230 volt, for 360 degree light, with IP-65 protection with all fixing accessories baseplate and suitable size of 40 mm GI pipe including 2.5 Sqmm multistranded copper conductor cable from junction box to fitting connector fitting complete all as specified and as directed. Make Crompton Greavies/ Wipro /Philips

Supply and fix Whistling Oyster extruded aluminium powder coated bollard light fitting of 11 Watt, 230 volt, for 360 degree light, with IP-65 protection CCT 6500 K with all fixing accessories such as PCC foundation and connecting with 2.5 Sqmm multistranded copper conductor cable from junction box to fitting connector fitting completecomplete all as specified and as directed. Make Wipro/ Philips/ equivalent

S & F Thermosplastic KV PC small type Distrubution board "Weather Proof " for lights of 4 Module of size 126x228x 111 mm terminal for cable connection with IP -65 protection complete all as specified and as directed

S & F MCB SP 6-32 Amp C curve 230 Volt complete all as specified and as directed Make: Legrend/ Schnider/ ABB

S & F MCB SPN 16/20 Amp C curve 230 Volt complete all as specified and as directed. Make: Legrend/ Schnider/ ABB

Supply, install and test Split air conditioner, inverter type electric driven, single phase, of capaciy 1.5 ton 5 star rated with copper condenser, indoor noise level < 50 db with standard fitment and outdoor unit fixed on wall mounted galvanised MS bracket and connected to power supply all as specified and directed. Make : LG Cat No KS-QWZD/Voltas Cat No SAC-185_JZJ/carrier cat No copper ESKO NEO Hybrid Jet INV R3CAI18EK5R39F0/LG Cat No KS-Q18ENZA/Hitachi Cat No KASHIKOI5100 x RSB518BEA.Z

S&F ABC stored pressure type fire extinguishers 6 Kgs capacity bearing ISI mark for fighting ABC class of fire. The Extinguisher will be manufactured strictly as per BIS: 15683:2006 bearing ISI mark.

S&F Co2 type fire extinguishers 4.5 Kgs capacity made from brand new seamless cylinder, as per IS:7285 and CCE approval, fitted with discharge hose and horn and wheel type/squeeze grip type valve with initial charge as per IS:15683:2006 specification, bearing ISI mark.

S&F Four Bucket fire stand with canopy complete all as spd and directed.

Material and Labour for Point wiring complete with 1.5 sqmm single core PVCinsulated but unsheathed multistranded copper conductor FRLS cable 1100 Volts grade drawn through and including PVC heavy duty conduit (minimum 20 mm dia external) but shall be increased as per actual site requirement in accordance with clause 19.125 of SSR part- I ISI marked with wall thickness not less than 1.8 mm including conduit accessories like bends, tees, junction boxes etc fixed concealed/ recessedin wall / On surface of roof ceiling etc including 1.5 sqmm PVC insulated but unsheathed multistranded copper conductor FRLS cable as earth continuity wire including modular type metal flush box with cover plate and frame for modular switches, sockets,switch sockets for (a) One light /fan point controlled by one, one way switch with required modules complete all as specified and as directed by Engineer-in-Charge. Note: Cost of cutting / chasing on wall and making good after repair shall be measured and paid seperately. Make of cable: Havells/ Finolex/ RR Kable/ KEI

S&F Modular switch 1 way, 6 Amps, 1 module complete all as specified and as directed by Engineer-in-Charge. Make: Legend (Arteour) / Schneider (zencelo) / hager (berker)

S&F MCB SPN 16 to 20 Amps 10 KA rupturing capacity 'C' curve complete all as specified and as directed by Engineer-in-Charge. Make: L&T/ C&S/ Legrand/ Schneider

S&F MCB SP 6/32 Amps 10 KA rupturing capacity 'C' curve complete all as specified and as directed by Engineer-in-Charge. Make: L&T/ C&S/ Legrand/ Schneider

S & F Thermosplastic KV PC small type Distrubution board "Weather Proof " of 4 Module of size 126x228x 111 mm terminal for cable connection with IP -65 protection complete all as specified and as directed

M&L for sub main wiring with two run of 4.0 sqmm single core PVC insulated but unsheathed multistranded copper conductor FRLS 1100 Volts grade cable fire retardant low smoke drawn through ad including PVC concealed conduit heavy duty grade ISI marked 25mm dia external but shall be increased as per actual site requirement in accordance with clause 19.125 of SSR part- I ISI marked including conduit accessories like bends, tees, junction boxes etc fixed concealed/ recessed in wall or ceiling etc including 4.0 sqmm PVC insulated but unsheathed multistranded copper conductor FRLS cable as earth continuity wire fixed on wall/ceiling complete all as specified and directed. Note: Cost of cutting / chasing on wall and making good after repair shall be deemed to be included in quoted rate . Make of cable: Havells/ HPL/ RR Kable/ KEI / L&T

S&F 20W Surface/Wall mounted Batten LED Luminaire, extruded aluminium housing with PC diffuser and integrated electronic driver with high efficiency long life LED chips, CRI=80(Minimum) PF>0.95, System luminous efficiency >100 lm/Watt, Operating voltage 150V-270V including electrical connection with 3 Core flexible cable of appropriate size from ceiling rose to LED fitting complete all as specified and directed, fixed in repairs Make : Wipro Trim LED (LL20-281-XXX-65AL1/Philips (BN021C LED 20S PSU CW GR S2) or Equivalent in Crompton Greaves. Note: The contractor should submit LM79 and LM80 test certificates of the manufacturers for the batch of light fittings supplied.

Bharat Enterprise

m/s prakash enterprise

SURAJ ENTERPRISE

Gatral Construction Co.

Vijay Construction Co

KRISHNA ENGINEERING

K K Construction Co

JAMNAGAR ELECTRIC AND MACHINERY CO