Repairing of office building, Brahmaputra Board, Siliguri, West Bengal.

Amount

Building Repair work:

Removing loose scales, blisters etc. from old painted surface and thoroughly smoothening the surface to make the same suitable for receiving fresh coat of point.

Applying Acrylic Emulsion Paint of approved make and brand on wall and ceiling including sand papering in intermediate coats including putty (to be done under specific instruction of Superintending Engineer) (Two coats) Standard Quality

Wood work in door and window frame fitted and fixed in position complete including a protective coat of painting at the contact surface of the frame excluding cost of concrete ,Iron Butt Hinges and M.S clamps. (The quantum should be corrected up to three decimals). (c) Sal: Siliguri

Supplying , fitting and fixing boiling water proof ply conforming to IS: 710-1977 bonded with phenol formaldehyde synthetic resin conforming to IS: 848-1974 of approved make and brand fitted and fixed as per design as per approval and direction of Engineer-in-Charge. (excluding the cost of supporting frame work and teak wood batten/lipping) 19mm

Panel shutters of door and window, as per design (each panel consisting of single plank without joint), Including fitting and fixing the same in position but excluding the cost of hinge and other fittings. In ground floor (in case of non-supply of single plank, penal rate of reduction of 20% will be made) 25mm thick shutters with 12mm thick panel of size 30 to 45 cm Sishu, Gamar, Champ, Badam, Bhola, Mogra, Hallak

Collapsible gate with 40mm x 40mm x 6mm Tee as top and bottom guide rail, 20mm x 10mm x2mm vertical channels 100mm apart in fully stretched position 20mm x 5mm M.S flats as collapsible bracing properly rivetted and washered including 38mm steel rollers including locking arrangements, fitted and fixed in position with lugs set in cement concrete and including cutting necessary holes, chasing etc. in walls, floor and making good damages complete. In ground floor

Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface. If necessary: on steel and other surface : with supper gloss (hi gloss) Two coats (with any shade expect white).

Supplying, fitting & fixing 1st quality Ceramic tiles in wall and floors to match with the existing work & 4 nos. of key stones (10mm) fixed with araldite at the back of each tile & finishing the joints with white cement mixed with colour in oxide if required to match the colour of tiles including roughening of concrete surface, if necessary or by synthetic adhesive & grout materials. (a) Floor With sand cement mortar (1:4)20mmthick&2mmthickcement slaryat back side of tiles using cement @2.91kg/sq.m & joinet filling using white cement [email protected]/sq.m. Clour Decorative.

Dismantling EP or Anglo- Indian WC

Supply and fitting and fixing and making good the wall ,making necessary pipe connection including all necessary accessories of Hindware Flora Star white one piece closet, size 62x37x67 cm flushing 3/6 ltr trap size s-22 complete as directed.

Supply fitting and fixing bib cook or stop cock chromium plated bibcock long body with wall flange with aerator ( equivalent to code No.512 & Model- Tropical/ Sumthing special of ESSCO or SIMILAR BRAND

Supply fitting and fixing white vitreous China best quality approved make wash basin with C.I. brackets on 75mmx75mm wooden blocks, C.P. waste fitting of 32 mm dia., one approved quality brass C.P pillar cook of 15mm dia C.P chain with rubber plug of 30mm dia approved quality PVC waste pipe with C.P. nut 32 mm dia , 900 mm long approved quality P.V.C connection pipe with heavy brass C.P. nut including mending good all damages and painting the brackets with two coats of approved paint ,(iii) 630mmx450mm size

Supply fitting and fixing CPVC pipes of approved make conform to is 1577:2007 ,with all necessary accessories , specials viz socket ,bend , tee, union cross, elbow, nipple, long screw, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps ,including cutting pipe, fitting, fixing, etc complete in all respect including cost of all necessary fitting as required, joining materials in any position above ground for exposed work i) CPVC PIPES CLASS -1, SDR-11, (Dia) 15mm.

Supplying & Fixing 240 V AC/DC superior type Ding-Dong Call Bell (Anchor) on HW board incl. S&F HW board.

Distribution wiring in 1.1 KV grade 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire(Brand approved by EIC) in 20mm size PVC rigid conduit 'FR'(Precision make), with 1.1 KV grade 1 x 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire as ECC, to 5A 3 pin flush type plug socket & Piano Key type switch fixed on MS CRC sheet metal (16 SWG) switch board cum JB on wall incl. Bakelite/Perspex (wall matching color) top cover 3 mm thick and incl. painting the MS box and mending good the damages to original finish. Average run 6m

Supply & Fixing 240 V, 25 A, 3 pin Modular type plug socket with 20/25A Modular switch (Brand approved by EIC) type SP MCB (C-Curve) and 4 Module GI Modular type switch board with 4 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necessary. connections with PVC Cu wire and earth continuity wire etc.

Supplying and fixing MCCB SS enclosure with IP20/30 protection, pwder coated provision for housing Four pole (4P) MCCB, concealed in wall after cutting the wall & mending good the damages to original finish / on flat iron frame incl. painting, connection & provision for earthing attachment. Standard(SKB7)

Supplying and fitting Lock Rail, size 25 cm

Supplying and fitting Door Handle, 10 cm

Supplying and fitting Tower Bolt, size 25 cm