REPAIR TO FOOTPATH DRAIN AND CERTAIN MISC EXTERNAL B AND R SERVICES WORKS IN MISA CAMP UNDER GE SOUTH TEZPUR

Amount

Demolition of Brickwork or stone/boulder masonry, built in lime mortar including all quoins, arches, pillars,etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.(Note:-(a) All coping’s, corbels, cornices and other projections shall be included with the wall measurements. (b) The rates include taking down walls, etc, with plaster but the measurements will be exclusive of plaster thickness. (c) Honeycomb brickwork and hollow concrete blocks shall be measured solid. (d) Item shall be applied to brickwork and stone masonry other than in roofs and pavings/floors).

Demolition of Cement concrete(unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed.

Demolition of Reinforced Cement Concrete (reinforcement cut as required to facilitate demolition) as in roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to stores and rubbish off the premises. all as directed.

Dismantling Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified and directed.(Note:-(a) All work shall be measured flat overall and not girthed. (b) Measurements of ridges, hips, valleys and flashings shall be taken in sq. m and paid for at the same rates as for roof covering of similar materials).

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

Material and labour for sand filling under floors or in foundation including watering and consolidation all as specified and directed.

Material and labour for providing 40 mm thick (measured solid) Precast Cement Concrete (1:2:4) type B0 using 12.5 mm graded aggregate as in louvers and jallies, including all mouldings but excluding frames,sets in cement mortar (1:4) all as specified and directed

Material and labour for precast reinforced cement concrete 1:2:4 type B1 using 20 mm graded stone aggregate as in cover slab of manhole/soak pit etc. setting in cement mortar 1:4,complete all as specified and directed.(Note:- Reinforcement shall be measured and paid separately).

Material and labour for brick work with locally available sub class ‘B’ old size best quality bricks straight or curved on plan exc 6 m mean radius built in cement mortar (1:6) all as specified and directed.

Material and labour for half brick work in cement mortar (1:4) straight or curved on plan to any radius with locally available Subclass ‘B’ old size best quality bricks all as specified and directed.

Supplied and fixed mild steel framed work such as door or gates grills,gratings, etc.. with ends of bars shouldered and/or riveted,or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed.

Supplied and fixed Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.(Note:-The rates include for fixing and for bracing, supporting or otherwise holding firmly in position so that the placing and ramming of concrete will not displace it).

S&F Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

Material and labour for screed bed or bedding layers 15 mm thick in cement mortar (1:6) for laying floor finishes all as directed.

Material and labour for 20 mm thick coloured granite slab, machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone as in floor, pillar, dado and laid overs screed bed or beddding layer in cement mortar including grinding and polishing complete all as specified and direcred .

Material and labour for Chequered cement concrete coloured tiles 25cm x 25cm x 20 to 22mm thick,set, jointed and pointed in neat cement slurry in floors with Grey Cement and pigment complete all as specified and directed

Material and labour for glossy finish chequered cement concrete coloured tiles 25cm x 25cm x 20 to 22mm thick,set, jointed and pointed in neat cement slurry in floors with Grey Cement and pigment complete all as specified and directed

Material and labour for glossy finish machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with grey cement complete all as specified and directed.

Material and labour for 75mm thick Cement concrete type C-2, 1:3:6 (40mm graded crushed aggregate) as in plinth protection / foot path complete all as specified and directed.

Material and labour for PCC (1:4:8) type D2 using 40 mm graded crushed aggregate laid in alternative bays finished the surface even and fair with using extra cement all as specified and directed

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and as directed.

Material and labour for 15 mm thick rendering in cement mortar (1:4) on fair face of brick work or concrete surface finished even and smooth (without using extra cement) with WPC complete all as specified and as directed.(Note:-WPC shall be measured and paid seperately).

Material and labour for 10 mm thick rendering in cement mortar (1:6) on fair face of brick work or concrete surface complete all as specified and as directed.

Supply only Integral waterproofing compound complete all as specified and directed.(Note:-Quantity and application of WPC shall be followed as per manufacturere's instuctions).

Material and labour for Cement concrete Type C1 1:3:6(20mm graded crushed aggregate)in surface channels and drains concrete all as specified and directed.

Material and labour for extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using ex- tra cement, including forms, moulds, mi- tred/stopped ends etc. all as specified and directed.(Note :-Add or deduct for each 25 mm girth or part thereof over or under 30cm shall be measured and paid to the contractor).

Material and labour for applying two coats of cement base paint to new plastered or unplastered surfaces of walls including preparing new plastered or unplastered surfaces complete all as specified and as directed.(Note:-The unit rate includes for:- (a) Use of all scaffolding, trestles, ladders, cradles, etc.necessary for execution of work and protective measures. (b) Removing of nails, making good holes, cracks, etc. (c) Work in patches, and in narrow widths. bands,cornices, pilasters, etc. and cutting in edges to line,where necessary. (d) Spreading and removing coverings to doors,windows, floors, fittings, etc., to protect them from splashes. (e) Removing and replacing furniture, movable cupboard, chicks, blinds, etc. (f) Washing floors, cleaning glass, joinery, electric fittings, wiring, etc. of drops and splashes and leaving premise, clean and tidy).

Material and labour for applying one coat of cement base paint to old surfaces of walls, soffit of chajja, slab projection including preparing surfaces complete all as specified and as directed.(Note:-The unit rate includes for:- (a) Use of all scaffolding, trestles, ladders, cradles, etc.necessary for execution of work and protective measures. (b) Removing of nails, making good holes, cracks, etc. (c) Work in patches, and in narrow widths. bands,cornices, pilasters, etc. and cutting in edges to line,where necessary. (d) Spreading and removing coverings to doors,windows, floors, fittings, etc., to protect them from splashes. (e) Removing and replacing furniture, movable cupboard, chicks, blinds, etc. (f) Washing floors, cleaning glass, joinery, electric fittings, wiring, etc. of drops and splashes and leaving premise, clean and tidy).

Material and labour for preparation of new and previously un-treated structure steel based surfaces of any description, of any description, not otherwise described,over 10cm width or girth and applying two coats of Synthetic enamel paint (ordinary tint) (each coat) over one coat of red oxide printer complete all as specified and directed.

Forming Contraction (Dummy) joints 65mm deep x 10mm wide, filled with sealing compound Grade 'A'complete all as specified and directed.

D G Corporation

KAMAKHYA CONSTRUCTION AND BUILDERS

M/S SR BUILDERS