REPAIR / MAINT OF CEILING FAN, EXHAUST FAN, WALL MOUNTED FANS AND OTHER APPLIANCES ALONG WITH CONNECTED REPAIR WORKS IN OMQ, MAP AND BILLETS AREA AT AF-I UNDER GE (AF) JAMNAGAR NO.2

Amount

Taking down carefully ceiling fan / exhaust fan / cabin fan / wall mounted fan by disconnecting electric connection for carrying out repairing such as rewinding, replacement of defective spare part, over hauling and painting etc as required and re-fixing in the same position after carry out the repairs works, and connecting complete all as specified and directed. Note:- Repairing such as rewinding, replacement of defective spare part, connecting wire,Over hauling and painting etc will be measured & paid separately under subsequent items.

M & L for rewinding of ceiling fan of any make by dismantling the ceiling fan,removing shaft ,bearing and bushing, removing the burnt copper winding from the slots, cleaning slot, replacement of defective nut bolts washer etc and rewinding of fan motor using appropriate gauge/size super enameled copper winding wire thermal class-E, including varnishing and reassembling. Providing three core copper cable PVC insulated multistranded 0.5mm 30cm length for connection of fan from ceiling rose, painting and testing of fan complete all as specified and directed. Rewinding should be carried out for the following size of ceiling fan:-

(a) 1200mm sweep

(b) 1400 mm sweep

M & L for rewinding of exhaust fan motor of any make by dismantling the exhaust fan,removing shaft ,bearing and bushing, removing the burnt copper winding from the slots, cleaning slot, replacement of defective nut bolts washer etc and rewinding of fan motor using appropriate gauge/size super enameled copper winding wire thermal class-E, including varnishing ,applying cotton tape and reassembling complete. Providing twin core copper cable 30cm length for connection, painting testing of fan complete all as specified and directed. Rewinding should be carried out for the following size of exhaust fan :-

(a) 450mm sweep

(b) 300mm sweep

(c) 200mm sweep

M & L for rewinding of pedestal fan motor of any make by dismantling the pedestal fan,removing shaft ,bearing and bushing, removing the burnt copper winding from the slots, cleaning slot, replacement of defective nut bolts washer etc and rewinding of fan motor using appropriate gauge/size super enameled copper winding wire thermal class-E, including varnishing ,applying cotton tape and reassembling complete. Testing, painting of fan should be carried out to entire satisfaction of Engr-in-charge. The size of pedestal fan for rewinding shall be as under:-

(a) 300 mm sweep.

(b) 450 mm sweep.

(c) 600 mm sweep.

All as per item No 4 above but wall mounted fan / Air circulators of size 450 mm sweep complete all as specified and directed.

All as per item No 4 above but wall mounted fan / Air circulators of size 600 mm sweep complete all as specified and directed.

Supply and fix in repair ball bearing of any size suitable for ceiling fan 1200 mm / 1400 mm sweep complete all as specified and directed.

Supply and fix in repair shaft for leath work of any size suitable for ceiling fan of 1200 mm / 1400 mm sweep complete all as specified and directed.

Supply and fix in repair gun metal bush of any size suitable for exhaust fan 300 / 450 mm sweep complete all as specified and directed.

Supply and fix in repair capacitor 2.5 MFD AC 230 Volt 50 HZ, for ceiling fans complete all as specified and directed.

Supply and fix in repair capacitor 4 MFD AC 230 Volt 50 HZ, of exhaust / bracket fan any size complete all as specified and directed.

Supply and fix in repair capacitor 3.15 MFD AC 230 Volt 50 HZ, of exhaust / bracket fan any size complete all as specified and directed.

Supply and fix in repair capacitor 5 MFD AC 230 Volt 50 HZ, of exhaust / bracket fan any size complete all as specified and directed.

Supply and fix in repair bolt, nuts, washer and split pin for the down rod of ceiling fan complete all as specified and directed.

Supply and connection in repair PVC insulated, PVC sheathed three core copper conductor cable multi stranded of size 0.5 Sqmm for connecting of fan from ceiling rose complete all as specified and directed.

Material and labour for painting of ceiling fan including blades by scrapping of old paint, filling of cavities formed, preparation / cleaning of surface, making surface smooth and spray painting with one coat of white synthetic enameled paint of superior quality and writing MES / SM No with appropriate size letters using black paint complete all as specified and directed.

Material and labour for painting of exhaust fan including blades by scrapping of old paint ,filling of cavities formed,preparation / cleaning of surface, making surface smooth and spray painting with one coat of white synthetic enameled paint of superior quality and writing MES /SM No with appropriate size letters using black paint complete all as specified and directed.

Assembling & fixing only ceiling fan of various sizes complete with blades, down rod canopy etc including hanging in position and connecting including taking down old fan and deposited in store yard of AGE E&M complete all as specified and directed.

Assembling & fixing only exhaust fan of various sizes complete with blades, fixing with 4 nos hold fastener nut and bolt with washer and connecting with flexible PVC insulated multistranded copper conductor cable of size 0.75 sqmm from ceiling rose to exhaust fan including taking down old fan and deposited in Store yard of AGE E&M complete all as specified and directed.

Supply and fix of fan clamp and rubber bush including nut, bolts, washers and split pin for hanging of ceiling fans complete all as specified and directed.

Supply and fixing ceiling fan MS clamp including nut, bolts and washers for various shapes and sizes for fixing of MS channel/pipe/angle complete all as specified and directed.

Supply and fix of fan rod of size 300mm long for ceiling fans complete all as specified and directed.

Supply and fix of fan rod of size 450mm long for ceiling fans complete all as specified and directed.

Supply and fix of fan rod of size 600mm long for ceiling fans complete all as specified and directed.

Supply and fix of fan rod of size 1050mm long for ceiling fans complete all as specified and directed.

Supply and fix plastic louvers for exhaust fan along with connected accessories for 200 mm and 300 mm dia sweep exhaust fan complete all as specified and directed.

S&F in repair poly propylene plastic louver shutter (flap type) of size 350 mm x 350 mm, circulating opening 310 mm dia, fixed on wall for exhaust fan with screw complete all as specified and directed.

Supply and fix in repair stepped type electronic fan Regulator switch type on the existing phenolic laminated sheet etc complete all as specified and directed.

S&F for modular step type fan regulator 100 watt 2 module complete all as specified and directed.

Supply and fix of PCB Board for BlDC Ceiling Fan, 1200 mm sweep, 350 RPM, 32 watts suitable for make Hector 500, I-FALCON, complete all as specified and directed.

Supply and fix of starter and rotar with full assembly for BLDC ceiling fan alongwith magnet ring, nut, bolt, washer etc suitable for make Hector 500, I-FALCON, complete all as specified and directed.

Supply and fix PVC body assembly for exhaust fan suitable for 200 / 250 / 300 mm complete all as specified and directed.

Supply and fix exhaust fan motor suitable for 200 / 250 / 300 mm PVC body complete all as specified and directed.

Supply and fixing fan blade for 1200 / 1400mm sweep ceiling fans suitable for existing fans complete all as specified and directed.

Supply and fixing fan blade for 300/380/450mm sweep exhaust fans suitable for existing make as per site complete all as specified and directed.

Supply and fixing iron frame, legs, rubber bush, nuts & bolts suitable for 300/380/450mm sweep exhaust fans for existing model as per site complete all as specified and directed.

M & L for distribution board (DB), double door (CRCA sheet) dust and vermin proof SPN 8 way with 100 Amps rated copper busbar, neutral bar, earth bar and cable ties for cable management,reversible door for for IP 43 , single pole and neutral 250 Volts, flush to wall complete with IP 43 protection complete all as specified and directed.

M&L for MCB single pole & neutral 240 volt C curve 10 KA (40 to 63) Amps capacity IP 20 complete all as specified and directed.

M&L for MCB triple pole & neutral 415 volt C curve 10 KA, 63Amps capacity IP 20 complete all as specified and directed.

M&L for MCB single pole, 5 to 30 Amp 240 volt B curve 10 KA, IP 20 complete all as specified and directed.

M & L for MCCB TPN 125A, 25KA,415 volts with thermal magnetic release adjustable type - Overload Setting: 0.8-1.0 In - Short Circuit Setting: 6-10 In complete all as specified and directed.

M & L for MCCB TPN 160A, 25KA, 415 volts with thermal magnetic release adjustable type - Overload Setting: 0.8-1.0 In - Short Circuit Setting: 6-10 In complete all as specified and directed.

Supply and fix LED decorative post of lantern for 360degree indirect light with IP 65 protection, glare free and better uniformity light, cap 40 Watt fittings including all accessories complete fixing accessories fixed in position complete all as specified and directed.

S & F industrial type plug & socket board SP & N enclosure with 2 pole and earth metal plug & socket complete with 10 Amp MCB SP complete all as specified and directed.

S&F in repairs pole mounted junction box (Street light boxes) weatherproof cabinets IP -65-IK-09 class II with removable chasis and faceplates, lockable door handle, sealable cover, self extinguishing conforms to EN 60439-3, for single phase lighting system, suitable for 6 module with 1 row complete all as specified and directed.

S & F in repairs contactor 25A 2NO, suitable for 230V AC complete all as specified and directed.

S & F in repairs MCB DP 32A DX3 DP, suitable for 230V AC complete all as specified and directed.

Supply, fix in repair digital weekly timer Switch of supply voltage 240vAC, 50/60 HZ complete all as specified and directed.

S & F in repair LED round spot light 3 W capacity , CCT :- 3000 K, working voltage level 220V-240V complete all as specified and directed.

S & F in repair LED round spot light 2 W capacity , CCT :- 3000 K, working voltage level 220V-240V, complete all as specified and directed. Make : Philips Product code : 919215850711 or equivalent make as mentioned in Appx 'B' to PS.

Supply and fix in repair LED power supply driver suitable for Primary:220-240 VAC, 50/60Hz suiatble for 40watt post top fitting Secondary: constant current DC:300mA with thermal, overload and short circuit protection complete all as specified and directed.

Supply and fix in repair pressure boosting system 1.0 HP cap, 220 Volt supply, suc & del pipe 25 x 25 mm size complete all as specified and directed.

M&L for repairing / servicing the pressure pump set of capacity 0.5 to 1 HP by dismantling the pump and motor, over hauling of pump by replacing the complete worn out parts such as cast iron impeller, bearing, water seal, repairing the shaft by machining, welding, grinding, polishing etc, including servicing of electric motor suitable capacity with replacement of worn out bearing for driven and non driven ends, reassembling the pump and motor after complete servicing and repair and testing on load complete all as specified and directed.

M&L for dismantling of existing defective Pressure pump motor of capacity 0.5 to 1 HP, single phase, 230 V, 50 Hz, from the foundation, disconnecting the electric connection, coupling pulley, cutting down and removing existing burnt out copper windings, cleaning of slots and rewinding with super enamelled solid copper conductor (winding wire) of suitable gauge and size complete including varnishing, drying, ovening, overhauling, greasing and fixing in the same position, making necessary electric connection and testing of pressure pump motor complete all as specified and directed. Note: (i) For rectification of pumps and motors if any spares, pressure switch, Pressure tank,sensor, non return valve, controller etc required to be replaced the same shall be measured and paid seperately under "supply and fixing" items.

Supply and fixing of Pressure Switch. Make: As per site requirement.

Supply and fixing of 24 Liter Hydro Pneumatic Pressure Tank/Pressure Pump Vessel/Pressure Pump & Booster Pump Tank suitable for brands pump Make: As per site requirement.

Supply and fixing of Brass Non Return Valve 1" . Make: As per site requirement.

Supply and fixing of Automatic Electronic Switch Control Water Pump Pressure Controller. Make: As per site requirement.

Supply and fixing of 5 way tee brass. Make: As per site requirement.

Taking down old unserviceable exhaust fan with new Exhaust fan, PVC body, heavy duty, AC single Phase, 230V of size 200/250mm sweep with, blades, and frame and louvers and other accessories etc complete all as specified and directed. Note : Unserviceable fan shall be deposited in MES Store yard.

S&F for exhaust fan of 300 mm sweep metalic body (heavy duty) single phase 230 / 240 volts, AC, 900 RPM complete and making holes with lovoured shutters including mounting frame and connecting the fan to ceiling rose including provision of three core flexible copper conductor cable of size 1.5 sqmm copper including to inside out surface & white wash etc with not less than 0.5mtr long to connection including taking down old u/s exhaust fan complete all as specified and directed. Note :- Unserviceable Exhaust Fan shall be deposited in MES Store yard.

Supply and fixing wall fan high speed, 400 mm sweep, 220-240 volts, AC, 50 Hz 1400, ± 50 rpm three blades with pull cord for on/off,speed setting and osillation on/off, air delivery not less than 56 CMM, power consumption not more than 70 watt complete all as specified and directed. Note :- Unserviceable Exhaust Fan shall be deposited in MES Store yard.

S & F energy efficient BLDC Ceiling Fan, 1200mm sweep BEE 5 star rated, AC single phase, 230 volts, 50 Hz, and connecting up including provision of three core flexible copper wire of size 1.5 sqmm from ceiling rose to ceiling fan complete in all respect and all accessories complete all as specified and directed. including taking down old unsv, all as per site requirement. Note : Unserviceable ceiling Fan shall be deposited in MES Store yard.

Pooja Enterprise (BID ID -3416020)

Sukhi Electricals (BID ID -3408201)

SURESH ELECTRICALS (BID ID -3407546)