Webel IT Park 07 IDM 19 20 89

Amount

Supply ,erection ,fitting & fixing of reflective vinyl signage, Unipole/Flag both side of signboard of size suitable size, fixed minimum 7.015 m above GFL with MS stucture & G.I sheet alumiuium painted with all accessories (nut,bolt ,clamps foundation etc)the drawing to be followed for consideration of minium dimention . The matter for the flex will be provided by WBEIDCL & the same has to be composed by the agency for printing in the rectro reflective vinyl printing .The unipole to be installed over G.I sheet with MS structure. The MS structure should heve adequate foundation with concrete. The structure should is to be safe against self & wind load with required colouring, complete. Provision for standing platform at the top with suitable access from GL is to be arranged The work is to be carried out as per the direction of the engineer in charge-----------------As per approved shop drawing. Payment as per actual size of the signboard (single side will be measured)

Supply & installation for 1"x1" sq MS (with paint) pipe framing, mounting on 3 mm ACP sheet pasting on rectro reflective vinyl, stand 2"x2" sq pipe painted 2 coats of suitable paints over 2 coats of primer as per approved matter, Bottom of frame to be atleast 4 ft height from FGL, inculding material labour Tresportation & Tax Size: 3 ft wide x 4 ft high - both side road indication board----------------As per approved shop drawing

Supply erection ,fitting MS stucture (6 " wall thickness) frame & back side support Hoarding board (min. size joist -6"x3",Channel-4"x 2", Angle-65x65 section ) ground site height up to 9 ft from GL RCC fundation ,& shawl wooden section 2"x1.6" battam framing mounting 20gz G.I sheet board , pasting on vinyl printing , inculding ( nut bolt & welding etc ) all material primer & synthetic paint (2 coats) including labour tresportation scrffolding etc.. Size: 20ft x 10 ft-----------As per approved shop drawing

Supply erection ,fitting MS stucture (6 " wall thickness) frame & back side support Hoarding Board (min. size joist -8"X4", Channel-5"x2.5", Angle-65x65 section ) bottom side frame height min. 9 ft from GL, suitable RCC fundation & sal wooden section 2"x1.6" battam framing mounting 20gz G.I sheet board, pasting on vinyl printing inculding (nut bolt & welding etc ) all material primer & synthetic paint (2 coats) including labour tresportation scrffolding etc.. Size: 20ft x 20 ft------------As per approved shop drawing

Fusion

AD-X-PRESS

Ins and Out

HERITAGE INFRASTRUCTURES