Civil works for renovating Time Office at TNPL Unit I

Amount

REMOVAL OF EXISTING MOSAIC TILES WITH BED MORTAR FOR FLOOR AND SKIRTING USING CONCRETE BREAKER AND DISPOSING THE SAME TO OUT SIDE THE COLONY PREMISES AND FILL IN LOW LYING AREA.

FOR SMALL WORKS WHICH IS UNQUANTIFIED EXACTLY, SUPPLY OF ELECTRICAL CONCRETE BREAKER (BOUSH MAKE -MODEL NO.11E) WITH LABOUR FOR DISMANTLING OF COCNRETE, BRICK WORK, CR MASONRY, ETC., THE WORK INCLUDES DISPOSAL OF DISMANTLED DEBRIS WITHIN THE LEAD OF 2KM APART AS DIRECTED.

THOROUGHLY PREPARE SURFACES OF THE FLOOR, SUPPLY AND LAYING OF TILES 4' X 2' DOUBLE CHARGED VITRIFIED TILES WITH SPACER JOINT OVER THE FLOOR OF APPROVED SHADE AND COLOUR WITH BED MORTAR IN CM 1:3 WITHOUT ANY WAVINESS FOR FLOORS AND SKIRTING AND GROUTING WITH APPROVED TILE GROUT OF MAKE (BOSTIK / MYK LATICRETE / WEBER) CURING ETC., COMPLETE AT ALL LEVELS.

SUPPLYING AND FIXING OF REFLECTIVE TYPE SUN CONTROL FILM TO GLASS PANELS INCLUDING SURFACE PREPARATION, CLEANING ETC., COMPLETE OF APPROVED QUALITY AND SHADE.

SUPPLY AND FIXING OF VERTICAL TYPE 100MM WIDE IMPORTED QUALITY VENETIAN BLIND OF SUITABLE SIZE AS PER INSTRUCTION OF APPROVED MAKE AND QUALITY NYLON HANDLE, TILTING ARRANGEMENT ETC., COMPLETE.

SUPPLYING AND FIXING OF "ARMSTRONG" MAKE FALSE ROOFING WITH MINERAL FIBRE MICRO BOARD (WHITE) OF SIZE 600MM X 600MM X 15MM INCLUDING ALL NECESSARY SUPPORTING SUSPENSION GRID SYSTEMS FROM RCC CEILING, ETC., COMPLETE. TYPE: FINE FISSURE SEKTOR.

PROVIDING AND FIXING OF UPVC DOORS OF APPROXIMATE SIZE 1.50 M X 2.50 M WITH DOUBLE LEAF OPENABLE SHUTTERS. THE FRAME MADE OUT OF UPVC PROFILE SECTION OF SIZE 60MM X 38MM X 2.2MM THICK WITH SHUTTER FRAME OF STANDARD SECTION 2.2MM THICK. THE DOOR SHUTTER IN TWO PARTS, ONE PART COVERED WITH UPVC SHEET AND ANOTHER PART COVERED WITH 5MM THICK PLAIN GLASS INCLUDING FIXING OF HINGES, AUTOMATIC DOOR CLOSER, SCREWS, HANDLES, RUBBER BEADING ETC., COMPLETE.

PROVIDING AND FIXING OF UPVC SLIDING WINDOW OF SIZE 1.50 X 1.20. THE FRAME MADE OUT OF UPVC PROFILE SECTION OF SIZE 62MM X 60MM X 2.2MM THICK WITH SHUTTER FRAME OF STANDARD SECTION 2.2MM THICK. THE WINDOW SHUTTER COVERED WITH 5MM THICK PLAIN GLASS INCLUDING FIXING OF ALUMINIUM JOINERY FITTINGS, LABOUR CHARGES, SCREWS, RUBBER BEADING ETC., COMPLETE

SUPPLYING AND FIXING OF STANDARD ALUMINIUM WINDOW (SLIDING TYPE - TWO TRACK SYSTEM) OF APPROXIMATE PANEL SIZE 1.50 X 1.50 MTR WITH NECESSARY LOCKING ARRANGMENT, RUBBER GASKET, BEADING ETC., INCLUDING 5MM THICK PLAIN GLASS FOR THE SAME (MAKE JINDAL OR INDAL OF SECTION SIZE 63MM X 38MM X 1.5MM THICK).

SUPPLY OF RUNNING TABLE FOR REQUIRED LENGTH X 600 MM WIDE X 750 MM HIGH USING 25MM THICK PRELAMINATED PARTICLE BOARD TABLE TOP INCLUDING ALL VERTICALS AND MODESTY 18 MM THICK PRELAMINATED PARTICLE BOARD EDGES WITH PVC EDGE BANDED FINISH ALL INCLUSIVE ETC., COMPLETE

SUPPLY OF MOBILE PEDESTAL 3 DRAWER TYPE PRE-LAM PEDESTAL USING 18 MM THICK PRELAMINATED PARTICLE BOARD WITH PVC EDGE BANDED FINISH FOR TOPS, SIDES AND FACIA, 9MM THICK PRELAM FOR BACK BOARD AND DRAWER REST, WITH PROVISION OF FILES IN THE BOTTOM DRAWER, ARRANGEMENTS FOR CENTRAL LOCKING FACILITY TO SECURE ALL DRAWERS TOGETHER WITH EBCO MAKE METABOX GLIDES ETC., COMPLETE INCLUDING HANDLES WITH 4 NOS TWIN WHEEL CASTORS.

THOROUGHLY PREPARE THE SURFACES OF WALLS AND APPLY TWO COATS OF FIRST QUALITY WALL PUTTY INCLUDING FINISHING SMOOTHLY WITHOUT ANY WAVINESS, ETC., AT ALL LEVELS.

THROUGHLY CLEANING THE EXISTING PAINTED SURFACES OF WALLS USING BUFFERING MACHINE. SCRAP THE EXISTING PAINTED SURFACE AND DISPOSE THE SAME AS DIRECTED. RATE INCLUDES LABOUR CHARGES AND ALL OTHER INCIDENTIAL CHARGES ETC., COMPLETE AT ALL LEVELS.

THROUGHLY PREPARE THE SURFACES AND APPLY ONE COAT OF WALL PRIMER OF APPROVED MAKE OVER WALL PUTTY SURFACES AND APPLY TWO COATS OF ACRYLIC EMULSION IST QUALITY OF APPROVED COLOUR AND MAKE INCLUDING MATERIAL COST AND ALL CONSUMABLES LABOUR CHARGES, SCAFFOLDING ETC. COMPLETE AT ALL LEVELS.

ERECTION OF SCAFFOLDING AND CLEANING THE SURFACE OF STRUCTURAL MEMBERS USING WIRE BRUSH, EMERY SHEETS AND APPLY ONE COAT OF RED OXIDE PRIMER OF APPROVAL QUALITY AND TWO COATS OF SYNTHETIC ENAMEL PAINT OF EITHER BERGER, ASIAN, SHALIMAR, ICI DULEX OR EQUIVALENT (INDUSTRIAL QUALITY) OF APPROVED COLOUR INCLUDING COST OF ALL MATERIALS, PAINT AND ALL OTHER INCIDENTAL CHARGES ETC., COMPLETE AT ALL LEVELS.

PROVIDING MANPOWER ASSISTANCE FOR ATTENDING MISCELLANEOUS CIVIL WORKS - MASON.

PROVIDING MANPOWER ASSISTANCE FOR ATTENDING MISCELLANEOUS CIVIL AND STRUCTURAL WORKS – HELPER FOR MASON / PLUMBER / CARPENTER / FITTER / WELDER, ETC.,

Bidder Name

Amount in Words

kanagaraj (BID ID -1452149)

K PALANISAMY (BID ID -1450703)

kanagaraj (BID ID -1452149)