SPL REPAIR TO SECURITY WALL FOR FOL DUMP PATTAN AND TOILET BLOCK OF BLDG NO P-617 OF 619 EME BN BARAMULLA,PROVN OF 02X TOILET COMPLEX AT 19 IDSR AND HARD STANDING AT 19 INF DIV AND CONSTR OF GUARD POST AT AP KITCHAMA UNDER GE 969 EWS

Amount

Excavation over areas n.exc 1.50m deep and getting hard/dense soil, complete all as specified and as directed.

Rolling and consolidation formation in cutting with roller using 8 to 12 Ton power roller complete to required level, gradient, slope, camber, super elevation including fling depression and including approved earth which may occure during rolling process complete all as specified and as directed.

M&L for soling (or sub base) 150mm thick compacted thickness with broken boulders or quarried stone, interstices filled, surface formed and rolled and consolidated ti required gradient and camber with 8 to 12 ton power roller complete all as specified and directed.

M&L 150 mm thick cement concrete 1:4:8, D-2 using (40mm graded aggregate) as in sub base floor, paving and hard standing complete all as specified and as directed.

M&L for cement concrete work in pavement hardstanding of flexural strength 40 Kg per square centimetre in field using 400 Kg of cement per cum thickness of concrete 25cm or less complete all as specified and as directed.

Formwork to edges of concrete flats, threads, threads, bricks in floors, opening in concrete walls, floor and roofs n.exc 200mm wide and sides of RCC/PCC bend in walls horizontal or sloping and similar work exc 10cm but n.exc 20cm wide complete all as specified and as directed.

M&L forming 12mm thick expansion joints for 150mm thick concrete, filled with pre formed bituminious filler and top 30mm primed and sealed with sealing compound, Grade 'A', complete all as specified and directed.

M&L forming contraction (dummy) joints 65mm deep x 10m wide, filled with sealing compound 'A' Grade complete all as specified and directed.

Removing excavated material n.exc 50m and depositing where directed at a level n.exc 1.5m above the starting point complete all as specified and directed.

Dismantling fencing wire mesh, any type complete all as specified and directed.

Demolition of Cement Concrete of any description and in any position (below or above ground level) complete all as specified and directed.

Taking down cement plaster or screed bedding layer of any description from concrete slab/terrace surfaces etc including racking out joints hacking for key, scrubbing down with water etc complete all as specified and as directed.

Demolition of brick work, PCC block masonary, stone masonry or boulder masonary built in cement mortar complete all as specified and as directed.

Dismantling posts or struts (wood, steel or R.C.C.) any section, incuding taking out embedded portion in cement concrete and making good disturbed ground complete all as specified and directed.

Demolition of Cement Concrete (reinforced) of any description and in any position (below or above ground level) complete all as specified and directed.

M&L cement concrete 1:4:8 type D-2 (40mm graded aggregate) in foundations, filling & mass concrete, water etc complete all as specified and as directed.

M&L for brick work with sub class 'B' bricks (Old size) straight or curved on plan exceeding 6 mtr mean radius built in CM (1:6) water etc complete all as specified and as directed.

All as per item No. 17 above but using old brick masonary in CM (1:6) complete all as specified and as directed.

M&L for rendering 10 mm thick in CM (1:4) on Brick/ concrete surfaces using waterproofing compound @ 3% by weight of cement and finished surfaces even & smooth without using extra cement (Note -WPC to be measured and paid separately).

Supply only WPC compound complete all as specified and as directed.

M&L for PCC (1:2:4) type B1 using 20 mm graded stone aggregate as in coping, roof kerbs or chamfered edges, flooring etc, including all necessary form works complete all as specified and as directed.

S&F mild steel posts & struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire etc. flat iron fillets for securing wire mesh etc including MS bars for tightning chain link necessary drilling bolting reveting etc. & similar work, fence with all nut & bolts complete conforming to Fe- 410 - or Fe-310-0 complete all as specified and as directed.

All as per item No 22 above but fixing only complete all as specified and directed.

S & F in repairs Galvanised 2 strand steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins etc, complete all as specified and as directed.

All as per item No 24 above but fixing in repairs after restraining resecuring and good staples etc.

M&L for walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in cement mortar (1:6), complete all as specified and as directed.

All as per item above No. 26 but using old stone masonry in CM (1:4) complete all as specified and as directed.

M&L for RCC (nominal mix) type B-1 1:2:4 (using 20mm graded aggregate) fdns, including rafts, footings, foundation beams, plinth beams; bases for columns, Complete all as specified and as directed.

M&L for RCC (nominal mix) type B-1 1:2:4 (using 20mm graded aggregate) Columns, pillars, piers, posts and struts ,complete all as specified and directed.

Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; flat surfaces incl fair finish, complete all as specified and as directed.

Formwork to sides of pillars, posts, struts, piers, columns and stanchions flat surfaces inc fair finished complete all as specified and as directed.

Mild TMT steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and as directed.

All as per item No 32 above but 5 mm dia and over up to 10m m dia in stirrups/binder/ spacers and rings completge all as specified

S&F MS Framed work as in door or gate of angle or other section with gusset plate rail, braces extra complete drilled for fixing of steel sheeting or other covering doors extra to be prepared for hanging or sliding with and including either hooks and hinges or steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete Fe-410-W(Gde E-250 quality A)

M&L for preperaring surfaces of newly or previously untreated steel or iron surfaces of any description over 10 cm in width or girth not otherwise described and apply two coats of sythetic enamel paint over a coat of red oxide primer,all as directed at site and as specified

M&L for preperaring surfaces of old steel or iron surfaces of any description over 10 cm in width or girth not otherwise described annd apply two coats of sythetic enamel paint all as Sdirected at site and as specified.

M&L for Preparing on new plastered surfaces of wall and applying two coats of cement base paint complete all as specified and directed.

M&L for Preparing on old plastered surfaces of wall and applying one coats of cement base paint complete all as specified and as directed.

Surface excavation n.exc 30cm deep and averaging 15cm deep and getting out in soft/loose soil, complete all as specified and as directed.

Excavation in trenches in any type of soil, n exc 1.5 M wide and n exc 1.5 M deep for foundation, etc or for shafts, wells, manholes etc n.exc 10 Sqm on plan and n.exc 1.5m in depth and getting out in any type of soil complete all as specified and as directed.

Excavation in post holes (or similar holes) each n.exc 0.5 cm, getting out, returning filing in and ramming earth or broken rubble mixed with earth around in layers n. exc 25 cm in hard/ dense soil, complete all as specified and as directed.

Returning filling in incl spreading leveling, watering and well ramming in layers n exc 25 cm, complete all as specified and as directed.

M&L Plain Cement concrete Type B-2, 1:2:4 (40mm graded aggregate), foundation, filling and mass concrete, complete all as specified and as directed.

M&L pre-cast cement concrete block masonry Type C-1, 1:3:6 (20mm graded laggregate) with solid blocks, exc 10cm in width and setting in cement mortar (1:6), complete all as specified and as directed.

M & L precast cement concrete trpe C-1 1:3:6 (using 20mm graded aggreagate) solid building blocks or slabs 10cm thick (with plain or interlocking joints as directed) setting in mortar (1:4), complete, in walls complete all as specified and as directed.

M & L Rendering 15 mm thick in cement and sand mortar 1:4 on stone masonry surfaces or surface other than fair face of brick-work or on one side of lathing with using integral waterproofing compound @ 3% by weight of cement including finishing the surface even and smooth without using extra cement complete all as specified. (Note - WPC shall be measured and paid separately).

Preparation of newly plastered surfaces of walls and applying two coats of oil bound distemper complete all as specified and as directed.

M&L for hardcore of gauge not exceeding 63 mm of broken stone, deposited, spread and levelled in layers not exceeding 15 cm thick, watered and rammed to a true surface complete all as specified and as directed.

M&L 75 mm thick Cement concrete type D-2, 1:4:8 (using 40 mm graded stone aggregate) in sub base of flooring, complete all as specified and as directed.

M&L 25 mm thick PCC 1:2:4 type B-1, using (20 mm graded stone aggregate), including finishing surface of concrete topping even and rough as sub base complete all as specified and as directed.

M&L Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exc 0.06 sqm but n.exc 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in cement and sand mortar (1:4), complete all as specified and as directed.

M&L Glazed ceramic tile 450 x 300 x 8 mm/ 600 x300 x10 mm thick (coloured) on vertical surfaces such as skirting, dados etc set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles over and including 10 Imm thick plaster in cement and sand mortar (1:4) complete all as specified and as directed.

S&F Roof trusses, trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc, complete all as specified and as directed.

M&L for Pre- painted galvalume aluminum zinc coating Gl based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wal, fxed with self tapping screws as etc complete all as specified and as directed.

Pre-painted galvalume aluminum zínc coating GI based Plain steel sheet |0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws as etc, complete all as specified and as directed.

S&F mild steel framed work such as grills (Ventilators for secuerity post) & frame work of water taks or posts of FE 290 Gde E-165.

S&F Steel door including projecting type hinges, steel handle, complete, with glazing bars, dovetailed or welded complete all as specified and as directed.

M&L pre-cast cement concrete Type B-1, 1:2;4, (20 mm graded aggregate) in lintels upto 1.5m clear span, cills, steps, seismic and other similar bands etc complete all as specified and as directed.

S&F second class softwood plain fillets square, rectangular or triangular in section, wrought secured with screws, cross sectional area exc 13 Sqcm and in.exc 25 Sqcm, complete all as specified and as directed.

S&F second class softwood plain fillets square, rectangular or triangular in section, wrought secured with screws, cross sectional area exc 3 Sqcm and n.exc 6 Sqcm, complete all as specified and as directed.

M&L for 6mm thick veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on one face has decorative veneer fixed with nails to timber frame work in ceiling etc, complete all as specified and as directed.

M&L for granite (of any type) 20mm thick machine cut, beded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone, complete all as specified and as directed.

M&L 75mm thick PCC (1:3:6) type C-1 using (20mm graded stone aggregate) as in plinth protection and similar works including finishing the surface of concrete topping even & fair, without using extra cement complete all as specified and as directed.

Dismantling floor hearth wall tilling including cement mortar bedding removing serviceable tiles to store and rubbish of the permishes .complete all as specified and directed.

S&F in repairs Vitreous China squatting pan, Orissa Pattern size 630x450 mm white with integral foot rests excluding flushing cistern incl flush pipe 60 cm long, complete all as specified and as directed.

S&F in repair Vitreous China squatting pan of pattern "long pan", size 580 mm white with 'P' or S" trap, front or back inlet and foot rests any pattem (excluding flushing cistern and flush pipe), complete all as specified and as directed.

S&F in repairs PVC flushing cistern, 10 Itrs capacity, low level including brackets, inlêt and outlet PVC pipe and fittings complete fixed, complete all as specified and directed.

S&F PVC connection pipe 15 mm size with PTMT nuts of length 600mm fixed to GI tubbing, complete all as specified and directed.

S&F 15mm bore Bib taps, fancy type chromium plated with crutch or butterfly handle, screwed down, serewed for iron pipe or for brass ferrule and fixed complete all as specified and as directed.

S&F 15mm bore Angle valve, fancy typ chromium plated high pressure with crutch or butterfly handle screwed both ends for iron pipe complete all as specified and as directed.

S&F soap dish chromium plated, fixed to plugs with chromium plated Screws, brass complete all as specified and as directed.

S&F for PVC (SWR) floor trap, plain with grating including jointing with solvent cement 75 mm bore complete all as specified and as directed.

Taking up or down 15mm steel tubing and connections, including cleaning for refixing or removal to store, complete all as specified and as directed.

S&F 110mm bore PVC (SWR) pipe single sokete any length with rubber ring joints laid in trenches or in floors complete all as specified and as directed.

S&F 110 mm bore PVC (SWR) bend, plain including jointing with solvent cement complete all as specified.

S&F 110mm bore PVC (SWR) vent cowl, plain including jointing with solvent cement complete all as specified and as directed.

Taking down chowkats or frames but with shutters (without taking off shutters from the frame) exc 1.5 sq. m but n exc 4 sq. m (without taking of shutters from the frame) and removal from site complete all as specified and as directed.

Taking down chowkats or frames but with shutters (without taking off shutters from the frame) not exc 1.5 sq.m (without taking of shutters from the frame) and removal from site all as specified and directed.

S&F 2nd Class Soft wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid rounded or chamfered put together with glue pinned at joints all as specified and as directed

S&F Glazed and skeleton shutters thickness 30 mm, (2nd class softwood), open rebated and prepared to receive glass,gauze, etc. (without sash bars), edges of framing piain,chamfered or rounded, complete all as specified and as directed.

S&F M S Butt hinges 100 mm medium weight, cold rolled mild steel all as specified and directed

S&F Aluminium handles 100 mm, cast type, anodised all as specified and directed.

S&F Aluminium anodised, barrel tower bolts 100 mm of extruded section and fixed all as specified and directed.

S&F in repair Rotational moulded polyethylene water storage tanks 1000tr (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and as directed.

S&F in repair Stainless steel wire cloth 0.36mm nominal dia of wire and average width of apeture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed.

S&F in repair Vitreous China urinals, bowl type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement, fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (lncluding of fixing supply pipe to flushing cistern, trap and waste pipe)

Dismantling of plain or corrugated steel sheeting , any gauge and thickness in roof covering including Nainital or similar pattern roof covering complete all as specified and as directed.

M&L 0.63 Galvanised, corrugated mild steel sheeting with two corrugations side lap, fixed with coach screws and washers, in roofs, walls etc. with grade of zinc coating 275, complete all as specified and as directed.

Plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275, complete all as specified and as directed.

S&F In repair Wash basins 600x450 mm, Vitreous China (flat back or angle back type) any size, including cutting for and pinning in ends of brackets or erecting stand but including of fixing of supply and waste pipe, complete all as specified and as directed.

M&L for preparation of old treated surface of brick/stone work, concrete plastered or unplastered surface and applying two distemper oil emulsion on walls all as specified.

All as per item No. 91 above but one coat of oil bound distemper on Ceiling all as specified.

S&F in Repair 5.5mm thick sheet glass, ordinary quality and glazing with oil putty in square exc 0.5 sq. m in each pane fixed in complete all as specified and as directed.

M & L Rendering 10 mm thick in cement and sand motar (1:4) on fair faces of brick work or cement concrete surfaces including finishing the surface even and smooth without using extra cement complete all as specified.

M & L Rendering 15 mm thick in cement and sand motar (1:4) on fair faces of brick work or cement concrete surfaces including finishing the surface even and smooth, complete all as specified.

S&F Solid PVC Door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube, complete all as shown in drawing of relevant item in MES, schedule Part-ll , 2010 as specified.

S & F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the Ms frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement complete all as shown in drawing of relevant item complete all as specified and as directed.

S&F steel ventilators with top hung shutter including hinges steel peg stay, squares no.exc 0.50 Sqm in each pane, complete all as specified and as directed.

S&F 150mm long aluminium anodised, barrel tower bolt ISI marked complete all as specified and as directed.

S&F 150mm long aluminium anodised cast type alumiinium handle ISI marked complete all as specified and as directed.

S&F for PVC (SWR) gully trap. plain with grating including jointing with solvent cement 110 mm bore complete all as specified and as directed.

S&F Tubular towel rail brass chromium plated 20mm dia D-Type 60cm |long between flanges, including brackets and fixed to walls, complete all as specified and as directed.

S&F PVC connection 15 mm size, of length 450 mm, with PTMT nuts supplied and fixed complete all as specified.

S&F 75mm bore PVC (SWR) pipe single sokete any length with rubber ring joints laid in trenches or in floors complete all as specified.

S&F 110 mm bore PVC (SWR) T 'any radius.

S&F 3 layer PPR pipes 25mm dia abore SDR 7.4 & SDR 11 UV) staablished and antimicrobial welded having thermal stability for hot and cold water.

S&F 3 layer PPR pipes 20mm dia abore SDR 7.4 & SDR 11 UV staablished and antimicrobial welded having thermal stability for hot and cold water.

S&F 500 Ltrs capacity Rotational moulded polyethylene in white coloured three layered ISI marked water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and as directed.

S&F 25mm PPR Gate valve inserted as per requirement of site

S&F 20mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (min weight 20mm-210 gms) complete all as specified and as directed.

S&F CP basin mixer for hot & cold water supply and fixed complete all as specified and as directed.

S&F for 4 mm thick figured glass pin head ftype and. glazing with oil putty in squares n.exc 0.5 sqm in each pane, complete all as specified and as directed.

S&F LLDPE septic tank with upflow filter including media designed to carry sewage and sludge water, excavation in any type of soil, PCC 1:4:8 below foundation, vent shaft, connection etc complete for 10 users, complete all as per manufacturer direction and as specified. Note: 1) Excavate the pit as per the size of Septic tank leaving side gap of "9" inchs in PCC. 2) Level the bed and foundation 3)Place the septic tank into the pit. 4)Fill sides with dry sand & bajiri and water it fully for effective compaction. 5) Do inlet & outlet pipe connection to the septic tank.

Soakage well exc in ordinary soil foundation in PCC 1:3:6 well of honey combed and solid in M-25 concrete including intercepting chamber screen chamber brick work in CM 1:4, RCC cover slab in M-25/RR Masonary/filling with brick bats, complete of size 1.80M dia x 3.00m deep complete all as specified and as directed. TD- CESZ/TD-1078/2011 SHEET 1/1

M&L PCC 1:3:6 type C-2 using 40mm graded stone agg in foundation and mass concrete, complete all as specified and as directed.

M&L for 150 mm dia Reinforced concrete pipes, class NP2, laid and jointed complete with collars, complete all as specified and as directed.

M&L for concrete bed to drain pipes in PCC 1:3:6 type C-2 using (40mm graded rushed stone aggregate) incuding packing under haunching against the sides of pipe after they are laid and tested for 150mm dia.

Cement concrete 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) as in surface channels, drains etc, complete all as specified and as directed.

Extra for forming fair faces (finished) drain of channel 30 cm inner girth in cement concrete using extra cement including forms moulds mitered stopped end etc Complete all as specified and as directed.

M&L precast RCC man holes cover in cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate, complete all as specified and as directed.

S&F Chequered cement concrete tiles 30 cm x 30 cm x 25 mm thick, with grey cement and pigments, set, jointed and pointed in neat cement slurry in floors including screed bed 15mm thick comple in CM 1:4 complete all as specified and as directed.

Point wiring with 1.5 Sqmm multistrand, FRLS copper conductor cable, PVC insulated and unsheathed, drawing in and including PVC concealed conduit 20 mm dia medium grade ISI marked with all accessories such as bends, elbows reducers, pressed steel/ MS terminal boxes factory made 1.6 mm thick dully painted in rectangular shape appropriate size (having wall thickness of conduit not less than 2.00 mm) for one light/ fan point controlled by one 5 Amps switch one way, covered with 3 mm thick plastic laminated sheet top cover for mounting switches, sockets requlators etc and continous PVC insulated and unsheathed 1.5 Sqmm copper conductor cable multistrand as earth wire, complete all as specified.

(a) One light point/fan point/Exhaust fan point controlled by one 5 Amps switch one way

(b)One 3 pin 5 Amp switch socket outlet on same board with accessories.

(c) One 3 pin 5 Amp switch socket outlet on independent board.

All as per item No.123 here in before but for one 15 Amps power point on the independent board with two runs of PVC insulated and unsheathed copper conductor cable of size 2.5 sqmm multy stranded, FRLS grade and 2.5 sqmm PVC insulated unsheathed solid copper conductor cable FRLS grade as earth lead.

S&F switch piano Flush type, single pole, one way 6 amp 240 volts, complete all as specified and directed.

S&F switch piano Flush type, single pole, one way 15 amp 240 volts, complete all as specified and directed.

S&F Socket outlet 2 in 1, 3 pin, 5 Amps, complete all as specified and as directed.

S&F Socket outlet 2 in 1, 3 pin, 5 and 15 Amps, complete all as specified and as directed.

S&F Ceiling rose, 3 terminal /PVC/ polycarbonate, isolated body complete all as specified and as directed.

S&F in repairs Lamp Holder, PVC/ Polycarbonate type with back plate suitable for batten fitting complete all as specified and as directed.

S&F in repairs Distribution Board, SPN 4 Way, Double door complete all as specified and as directed.

Supply and fixing amp rating 240V, 10OKA 'C' curve miniature circuit breaker SPN 32 Amps (MCB SPN) and current carrying capacity in the MCB DB complete with connection testing and commissioning.

Supply and fixing amp rating 240V, 10KA 'C' curve miniature circuit breaker SP 6-32 Amps (MCB SP) and current carrying capacity in the MCBDB Complete with connection testing and commissioning.

Supply and fix LED Lamp 10 W all as specified and directed.

Supply and fixing LED Iights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible conductor copper cable of suitable size from ceiling rose all as specified and directed.

Supply and fixing LED Iights fitting 1x 10W, bulkhead luminaries including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size.

S&F exhaust fan, steel body AC single phase, 230V of size 300mm sweep with, blades, and frame and louvers

S&F electric water heater, storage type steel body with copper inner tank and heating element upto 2KW capacity 25 itre, BEE 5 star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc

S&F 1100 V grade heavy duty cable with pvc insulated aluminium conductor served with an inner sheathing of pvc tape and overall pvc sheathed in service connection suspended by insulating hangers not more than 1mtr apart including 4mm suspension wire one twin core cable flat or circular of size 10 sqmm complete all as specified and as directed.

Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC), complete all as specified and as directed.

M&L in repairs for Earthing complete with galvanized steel earth plate electrode 60Omm x 600mm x6 mm thick buried directly in ground (earth pit not less than 2.25 m deep below normal ground level) with top edge of the plate not less than 1.5 m below normal ground level connected to galvanized earth wire of 4 mm dia (up to 7.5 m in length from earth plate ) by means of bolts and nuts checknuts and washers of galvanized iron or steel all as specified and shown in electrical plate no.3 of SSR part Ii ncluding necessary excavation and earth work in any type of soil PCC 1:3:6 type C1 chamber with RCC 1:2:4 type B1 40 mm thick cover with MS rod 8mm dia at 150mm clc in both ways as reinforcement, watering funnel, 20 mm dia light grade for protection of earth electrode, 20 mm dia GI pipe light grade for watering complete all as specified and as directed by Engineer in charge and tested on completion. Note: The rate is inclusive of necessary earth work, RFR and removal etc

Supply and laying XLPE insulated PVC FRLS, armoured heavy duty electric cable withaluminium conductor, 1100 volts grade, cross-sectional area, galvanized steel strip or wire armoured, of size 16 Sqmm 2 Core, complete all as specified and as directed.

Supply and spreading clean dry sand in trenches for cushioning all as specified for cable protection complete all as directed. (Note: The punned down thickness shall only be measured)

Supply and laying sub class 'B' bricks laid across the cable for cable protection complete all as specified and as directed.

M&L for road cutting for passing XLPE UG Cable including Gl pipe 40mm dia light grade and making good to the disturbed surface with PCC (1:4:8), complete all as specified and as directed.

Supply & Fixing GI tubing, medium grade, ISI marked complete with all fittings, laid in trenches or laid under floors, fixed on walls with and providing clamps etc size 25mm dia bore complete all as specified & directed.

Supply & Fxing Gl tubing, medium grade, ISl marked complete with all fittings, laid in trenches or laid under floors, fixed on walls with and providing clamps etc size 20mm dia bore complete all as specified and as directed.

S&F in repair of stop valves/gate valves, cast copper alloy, screwed down, crutch or butterfly handle with high pressure, screwed both ends for iron pipe or unions and fixed complete including taking down of old one suitable for size 25 mm dia complete all as specified and as directed.

S&F in repair of stop valves/gate valves, cast copper alloy, screwed down, crutch or butterfly handle with high pressure, screwed both ends for iron pipe or unions and fixed complete including taking down of old one suitable for size 20 mm dia complete all as specified and as directed.

Note:- Schedule of credit Rs.47,206.00 will be deducted from total amount quoted while accepting the bid. Details of schedule of credit is given in tender documents.

Javeed And Co

M/S HAJI MOHD ASHRAF SUMJI

M/S GHULAM RASOOL LONE AND SONS

M/s Shabir Ahmed Mir and Bros

M/S RIYAZ AHMAD QADRI