Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹30.9 LAccepted-AOC VIII BADWALA ARKEDIA GRANT PO PREMNAGAR DEHRADUN | DEHRADUN | DEHRADUN | UTTARAKHAND | L1 | Accepted-AOC Acceptance of contract | |
| 2 | L2₹31.5 L+₹57,122.50 (1.85%)Rejected-AOC WING NO 7 2 10 PREMNAGAR DEHRADUN UK | L2 | Rejected-AOC R | |
| 3 | L3₹31.9 L+₹96,582.50 (3.12%)Rejected-AOC 27 CHITRAKOOT ENCLAVE NEAR ANURAG NURSARY DEHRADUN 248001 | DEHRADUN | DEHRADUN | UTTARAKHAND | 248001 | L3 | Rejected-AOC R | |
| 4 | L4₹32.7 L+₹1.8 L (5.82%)Rejected-AOC 3 VIJAY PARK CHAKRATA ROAD DEHRADUN 248 001 UK | DEHRADUN | UTTARAKHAND | 248001 | L4 | Rejected-AOC R | |
| 5 | L5₹43.0 L+₹12.1 L (39.0%)Rejected-AOC | L5 | Rejected-AOC R |
Tender Value
₹49 L
EMD Value
₹98,000
Closing Date
5 Jul 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE IMA Dehradun
GE IMA Dehradun
PROVN OF CERTAIN LBW REVENUE AND MINOR WORKS AT IMA DEHRADUN
2023_MES_601715_1
GE/IMA/T-38 of 2023-2024 9329/E8
Open Tender
Support/Maintenance Service
Item Rate
120 days
GE IMA Dehradun
Refer NIT
8 documents required · 8 mandatory
₹500
Yes
GE IMA Dehradun
₹98,000
Yes
1 Sept 2023
7 Jun 2023
7 Jul 2023
8 Jun 2023
5 Jul 2023
21 Jun 2023
Amount
Demolition of cement concrete floors/tiles etc in ground floor and paving not exc 15 Cm thickness (below or above ground level) and removing out side the IMA premises and depositing where directed at a level not exc 1.5 mtr above the starting point complete all as specified.
Dismantling Floor,hearth or wall tiles including cement mortar bedding but not backing) and removal the demolished material out side IMA premises complete all as specified.
M&L for Vitrified glazed colour jointless tiles 8-9 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 Sqm, in floors etc.Laid over and including 15 mm thick screed bed in cement mortar 1:4, set and jointed in neat cement slurry and pointed in tile grout to match the colour of tile complete all as specified and directed.
M&L for vitrified glazed coloured tiles 8-9mm thick (square/ rect) polished, area of each tiles not exc 0.36 Sqm inverticle surfaces such as dado/skirting etc set and jointed in neat cement slurry and pointed in tile grout to match the colour including 10 mm thick rendering in cement mortar 1:4 complete all as specified and directed.
M&L for glazed ceramic coloured jointless tiles 450X300X6-7mm thick as in vertical surfaces including 10 mm thick rendering in cement mortar 1:4 and set and jointed in neat cement slurry and pointed in tile grout to match the surface of tiles complete all as specified and directed.
M & L for machine cut Kota stone 18-20 mm thick over cement screed base laid and jointed with grey cement slurry and pointed in grout to match the shade of the slab including rubbing and polishing complete up to desired finish as directed .
M & L for 20 mm thick scred bed or bedding layer of mortar in cement mortar 1:6 for laying of flooring complete all as specified and directed. Stage passing shall be done by GE before laying kota stone on screed bed.
M&L for complete rubbing and mirror polishing to old kota stone, marble, terrezo and similar floors as required, all as directed by Engineer -in- Charge.
M&L for 25mm thick PCC 1:2:4 type B-0 (using 12.5mm graded crushed stone aggregate) as in sub floor , sub base; concrete surface finished even & rough to receive topping floor/tiles finish/layer complete all as specified. Stage passing shall be done by GE before laying top layer on sub base.
Taking down and easing of door shutters to ensure smooth closing/opening including tightening of hinges, adjustement of tower bolts, sliding bolt and refixing in same opening etc area exc 1 Sqm but not exc 2 Sqm each complete all as specified.
Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets
S&F 4 mm thick E-board false ceiling (Classic) including galvanised colour coated snap grid frame for false ceiling, size of grid 605 X 605 mm fixed with 1.6 mm dia GI wire suspenders one end tied to roof members and other end connected to main tee of grid framework by means of 4 mm dia adjustable "J" hook consisting of two Nos washers and two nuts at 1.2 mtr centres all as specified and as directed by Engineer-in charge (size of main tee 38 mm X 25 mm X 1.4 mm, cross tee 38 mm X 25 mm X 1.4 mm angle along walls 38 mm X 25 mm X 2.0 mm) on ceiling, complete all as specified and directed including fixed in any position with nails.
Providing & fixing 12mm thick full height toughened glass partition (upto soffit of slab/beam) using enox/ozone make patch fittings, includes necessary frosted film to be fixed on the glass, the joints between the glass to be filled with necessary water proof silicon including all items to complete the work as per direction & specification. Make:- Saint Govin/Atul/Modi
Providing & fixing frame less fully glazed 12mm thick toughened glass door shutter (in one/two shutter) upto 2.4m height with floor mounted pivoted door spring to shutter using enox/ozone make patch fittings, including, stainless steel handle 300mm long, lock and cutting holes including necessary frosted film to be fixed on the glass as per partition including all items to complete the work as per direction & specification. Make:- Saint Govin/Atul/ Modi
M&L for PVC wall lining consisting of 5 mm thick wood grain printed PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specification and Drawing in SSR in repairs complete all as specified and directed. Make- Reyna/Glove/Height Star
S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing. Make- Reyna/Glove/ Height Star
Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth for foundation etc not exceeding 10 Sqm on plan and not exceeding 1.50m in depth and getting out in hard/dense soil all as specified and directed.
M&L for PCC 1:4:8 type C-2 (using 40 mm graded crushed stone aggregate) as in foundation filling, sub base and mass concrete all as specified and directed.
M&L for RCC (Nominal Mix) 1:2:4 Type B1 (using 20mm graded crushed stone aggregate) as in Slabs supported on walls, beams and columns in floors, roofs, landings, blaconies, canopies, deck slabs and in shelves and the like all as specified and directed.
M&L for Mild steel TMT bars 10 mm dia and over cut to length bent to shape required including cranking, bending spirally including mild steel wire not less than 0.9 mm dia or securing with clips all as specified and directed.
Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 Cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide complete all as directed
M&L for Brick work with sub class 'B' brick (old size) straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as directed.
M&L for hard core of broken stone or boulders of gauge not exceeding 63 mm, deposited, spread and levelled in layers not exceeding 15 cm thick, watered and rammed to a true surfaces complete all as specified and directed.
Rough excavation n. exc 1.5m deep in soft/loose soil, getting out and removing soil out side the IMA premises and depositing where directed.
Spreading and levelling of soil obtained from excavation in layers n exc. 25 Cm and well ramming including watering as required.
M&L for Screed bed or bedding layer of mortar 15mm thick in cement mortar 1:4 for laying floor finishes complete all as specified.
M&L for 20mm thick Granite stone ( Lakha red) (table rubbed & polished) for platform and the like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite stone complete all as directed.
Taking down cement plaster on brick or stone walling built in cement mortar including raking out joints hacking for key scrubbing down with water etc including removing out side IMA premises complete all as specified and directed.
M&L for 15mm thick ready mix cement plaster on brick, concrete surfaces and Ceiling including providing & mixing water proofing compound as per manufacturers specifications, surface finished even & fair, finishing curing scaffolding etc complete all as specified and directed. Make : ACC (Suraksha) /Ultratech(Readyplast)/Birla (Aerocom)/Unicrete.
M&L for Non skid ceramic coloured tiles 7 to 8mm thick (Square or rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm, laid in floors etc, set and jointed in neat cement slurry and pointed in same colour grout (epoxy) to match the shade of tiles with and including laying of 15 mm thick screed bed or bedding layer in cement mortar 1:6 complete including dismantling of existing floor tiling including cement mortar bedding and removing out side IMA premises complete all as directed.
S & F 125 mm size stainless steel handle cast type anodized complete all as specified and directed. Make:- Hattich/Haffle/Godrej/Hexa
18mm thick one side prelaminated colour WPC Sheet for Kitchen cup board shutter and frame & fixed at site, colour as approved by Engineer- in-Charge complete all as specified and directed. Note :- WPC board edges properly finished with strip on band edges. Make:- Kumar Arch Tech Ltd( Ecocell) Navratan Speciality Chemicals LLP Ahmedabad ( GIZA) Yamuna Interiors Pvt Ltd, Yamuna Nagar(Black Cobra)
S & F Continuous (piano) hinges, mild steel, bright finish or electrogalvanised width of flap 30 mm complete all as specified. Make:- Hattich/Haffle/Godrej/Hexa
M&L for cutting chases, pining in, making good to facings where reqd and pointing in cement motor (1:3) to ends or edges of landings, steps, cills, sunsheds, shelves, lintels, etc, and cutting chases for concealed water tubing or concilled conduit wiring, etc and making good exceed 20 cm girth in brick walls complete all specified and directed
S&F 15mm bore medium grade steel water tubing, galvanized (ISI Marked) with and including all fittings (ISI Marked) and jointed, tested and fixed complete to wall and ceiling or laid in floors etc complete including taking up or down existing steel tubing pipe complete all as directed.
S&F 20mm bore medium grade steel water tubing, galvanized (ISI Marked) with and including all fittings (ISI Marked) and jointed, tested and fixed complete to wall and ceiling or laid in floors etc complete including taking up or down existing steel tubing pipe complete all as directed.
M&L for Udaipur green marble work 18 to 20 mm thick (table rubbed and polished) as in flooring, steps, cooking platform and like with and including 20 mm thick cement screed bed in cement mortar 1:6 and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of slab including rounding of edges of udaipur green stone and demolition of existing stone slab or tiles with screed bed of any description and in any position complete all as specified and directed.
S&F vitreous china wash down water closet pan (pedestal pattern) white including seat cover of plastic, complete including CP jet with necessary PVC pipe fittings fixed in repairs complete all as specified and directed.
S&F PVC low level flushing cistern 10 Ltr dual flush capacity symphonic action type white including ball valve, float valve and handle including bracket and PVC flush pipe fixed in repairs complete all as specified and directed. Make:- Cera/Hindware/Parryware
S&F 15mm bore short body bib tap chromium plated with wall flange and aerator fixed in repair complete all as specified and directed. Make- Jaguar/Cera (Victor series)/Kajaria Kerovit
15mm dia chromium plated concealed stop cock, heavy body with cap fixed in repair complete all as specified and directed. Make- Jaguar/Cera (Victor series)/Kajaria Kerovit
PVC connection 15 mm size with PTMT nuts of length 600 mm complete all as specified and directed. Make:- Prayag/Cera/Shakti
S&F in repairs sheet glass shelf assembly consisting of 5.0 mm thick sheet glass shelf 12 mm wide with chromium plated bracket guard and railing 60 Cm long.
S&F in repairs sheet glass shelf corner assembly consisting of 5.0 mm thick sheet glass shelf 12 mm wide with chromium plated bracket guard and railing 60 Cm long.
S&F of toilet paper holder of stainless steel fiexed to walls with chromium plated brass screws. Make:- Jaquar/Cera/Prayag
S&F CP Health faucet for EWC 1.20 mtr long flexible pipe with two steel check nuts fixed in repair complete all as specified. Make :- Jaquar/Cera/Prayag
S&F in repair of vitreous china wash down water closet pan (pedestal pattern) (cascade), white including flushing cistern, plastic water closet seat, white,closed pattern with flat bottom, and cover complete all as specified and as directed. Make : Jaguar baaring CAT Part Part NoFLS- WHT- 5351SN/ Hindware CAT Part No 92098 P-21 including trap (P or S Type) Parryware Cat No VERVE 10269
S&F CP brass hot & cold mixer cast copper alloy with centre hold for WHB and long shank fancy type 15m bore complete all as directed by Engineer-in-charge. Make:- Jaguar/Cera (Victor series)/Kajaria Kerovit
S&F CP brass hot & cold 15mm dia wall mixture for mixing hot & cold water with shower provn with connecting legs & flengs in complete all as specified. Make :- Jaguar/Cera (Victor series)/Kajaria Kerovit
S&F CP brass hot & cold 15mm dia wall mixture for mixing hot & cold water for kichen sink in complete all as specified. Make :- Jaguar/Cera (Victor series)/Kajaria Kerovit
S&F CP fancy type Angle valve 15mm dia (angle cock) cast copper alloy. Make:- Jaguar/Cera (Victor series)/Kajaria Kerovit
S&F CP fancy type twin Angle valve 15mm dia (angle cock) cast copper alloy. Make:- Jaguar/Cera (Victor series)/Kajaria Kerovit
S&F CP brass shower rose fency type 50mm dia,200mm wide with extension Arm pipes CP Make- Jaguar/Cera (Victor series)/Kajaria Kerovit
Complete removing of existing treatment from wall / ceilling by using machinary complete all as specified and directed.
Prepration of scrapped surface of wall / ceilling and applying 1mm thick Asian acrylic damp proof wall care putty as per manufactur instruction complete all as specified and directed.
Prepration of surfaces of wall / ceiling and applying two coats of oil bound emulsion distemper over a coat of primer by mechanical means complete all as specified and directed.
Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surface of walls, floors, etc.
Material and labour for Modular point wiring with PVC insulated and unsheathed electric cable 1100 volts grade single core FRLSH having multi stranded copper conductor of 1.5 sq mm nominal cross sectional area drawn in nincluding non rigid PVC Conduit concealed in wall with all fitting not less than 25 mm dia and fixing accessories and 1.5 Sqmm PVC insulated unsheathed multistranded copper conductor cable as continuous earth conductor, connected to earth dolly by providing suitable lugs with & including modular metal flush box of required size factory made for mounting Modular switch, regulators etc with and including Modular cover and frame , ISI marked, for the following. Make of wire:Havells, Polycab,Anchor Note: (i) The quoted rates shall be deemed to be inclusive for making good the disturbed surface in cement mortar 1:4 including finishing the surface to match with the existing surface. (ii) Point wiring & earth wire shall be connected to each & every sunken box.
One light point controlled by one, one way switch 5 Amps
One fan point/ exhaust fan point controlled by one, one way switch 5 Amps
One 3 pin 5 Amps switch socket outlet point controlled by one switch on Same board.
One 3 pin 5 Amps switch socket outlet point controlled by one switch on independent board.
All as per item No.59 above but with stranded copper conductor 2.5 Sqmm (nominal area), two single core, PVC insulated cable 1100 Volt grade ISI-694 marked for 3 pin, 15 Amp socket outlet, independent, including PVC insulated stranded copper conductor 4 Sqmm (nominal area) single core as earth continuity conductor to common earth and connecting to earth dolly.
Supply and fix modular switch 1 way 6A, 1 Module
Supply and fix modular switch 1 way 16A, 1 Module with indicator lamp
Supply and fix modular socket 6A, 2/3 pin combined 2 Module
Supply and fix modular socket 6A/16A, 2/3 pin combined 2 Module
Supply and fix modular fan regulators step type 2 module 120W .
Material and labour for ceiling rose, 63.5 mm dia, ISI marked, three terminal of polycarbonate/isolated body complete all as directed. Make: Anchor, Crab tree, Ess Ess Kay
Supply only LED batten light fitting of lumens 2500 lumens wall mounted ,high pressure die cast alluminium, fully diffused ,polycarbonated diffuser,inbuilt electronic driver IP-20 ,high bright LED lamp, colour temp not less than 5700 COOL DAY Light,colour rending index not less than 80 ,life not less than 20000 hrs, inbuilt electronic driver, PF not less than 0.90 and THD less than 20 % with operating voltage 140-270V AC, 50 Hz, surge protection minimum 2.5KV including taking down old unsv light fitting . Make: - Philips /Crompton/ Havelles/ Eveready
Supply only LED batten light fitting of lumens 1200 lumens wall mounted ,high pressure die cast alluminium, fully diffused ,polycarbonated diffuser,inbuilt electronic driver IP-20 ,high bright LED lamp, colour temp not less than 5700 COOL DAY Light,colour rending index not less than 80 ,life not less than 20000 hrs, inbuilt electronic driver, PF not less than 0.90 and THD less than 20 % with operating voltage 140-270V AC, 50 Hz, surge protection minimum 2KV including taking down old unsv light fitting. Make: - Philips /Crompton/ Havelles/ Eveready
M/S S P BUILDERS
M/S PUNDIR BUILDERS
M/S RAJESH KUMAR GOYAL
Bhanu Prakash
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .