REPAIR/MAINTENANCE FOR ATTENDING DAY TO DAY ONLINE COMPLAINTS OF AREA B AT NAVAL DOCKYARD VISAKHAPATNAM UNDER GE(I) DM VISAKHAPATNAM

Demolition of brick work or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stone work and precast concrete articles complete all as specified and directed.

M&L for pre cast cement concrete masonary in PCC 1:3:6 type C2, using 10mm graded stone aggregate with solid block, exceeding 10mm width getting in CM 1:6 complete all as specified and directed.

Demolition of cement concrete ( un reinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed.

M&L removing all dust / dirt from sunken floor and applying two layers of cement slurry mixed with Acrylic based polymer modified cementitous composite compound coating such as Product like Sika Latex Power manufactured by Sika India Pvt Ltd or equivalent product manufacture by Fosroc Chemicals (India) Ltd / Pidilite industries Ltd / Choksey Chemicals Pvt. on concrete / brick surfaces as water proofing slurry coating as per manufacturer's instructions complete all as specified and directed.

M&L rendering 20 mm thick in two coats, 10 mm thick each coat with Polymer mortar (cement mortar 1:4 mixed with Acrylic based polymer modified cementitous composite compound such as Product like Sika Latex Power manufactured by Sika India Pvt Ltd or equivalent product manufacture by Fosroc Chemicals (India) Ltd / Pidilite industries Ltd / Choksey Chemicals Pvt) on concrete / brick surfaces and finishing surfaces even and smooth without using extra cement complete all as specified. Each layer shall be allowed to air cure for 4 hours followed with water curing for 48 hours before applying the second layer all as specified and directed.

M&L for providing 200 micron thick polythene film pasted with the help of adhesives over the treatment plastered surfaces of sunken floor complete all as specified and directed.

M&L for PCC 1:4:8 type D2 type (using 40 mm graded crushed stone aggregate) as in foundation filling and mass concrete etc complete all as specified and directed.

M&L for 25 mm thick PCC (1:2:4) type B0 (using 12.5 mm graded crushed stone aggregate) as in floor and finishing the surfaces fair and even without using extra cement all as specified and directed

Taking down cement plaster on brick or concrete wall etc including racking out joint hacking for key, scrubbing down with water etc. complete all as specified and as directed.

M&L for rendering 15 mm thick in CM 1:4 on brick/concrete wall surfaces of any description, and finishing the surfaces even and smooth without using extra cement complete all as specified and directed.

M&L for rendering 10 mm thick in CM 1:4 on brick/concrete wall surfaces of any description, and finishing the surfaces even and smooth without using extra cement all as specified and directed.

M&L for rendering 5mm thick cement plaster 1:3 on fair faces of brick work or concrete surfaces of ceilings finished even & smooth(without using extra cement) all as specified and directed.

M&L for preparation of new plastered surfaces of walls and applying two coats of distemper oil emulsion over a coat of primer with 3mm thick wall care putty on wall complete all as specified and directed.

M & L for preparation of new plastered surfaces of walls and applying two coats of exterior emulsion paint (weather coat) over a coat of alkali resistance primer complete all as specified and directed.

M&L for preparation of new plastered surfaces of wall and applying three coats of white wash complete all as specified and as directed

Complete removal of existing treatment of old decorated surfaces of ceiling and applying three coat of white wash complete all as specified and as directed.

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises all as specified and directed.

Material & Labour for coloured Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed inneat cement slurry and pointed in white or coloured cement to match laid over and including cement screed 10 mm thick in 1:4 complete all as specified and as directed.

Material & Labour for coloured glazed ceramic tiles (300 x 450) x 7-8 mm thick in dado set and jointed in neat cement slurry and pointed in coloured cement to match fixed over & including rendering in CM 1:3, 10 mm thick complete all as specified and as directed.

M&L for light shade vitrified ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.18 sqm but not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick 1:6 cement morter including roughning surface of old concrete floor by picking sweeping clean and washing down with water to remove dust and brushing neat cement slurry with 3 kg of cement per sqm complete all as specified and directed.

Taking down chowkats or frames with shutter (without taking off shutter from the frames) n.exc 1.50 Sqm each complete all as specified and directed.

S&F factory made solid PVC door Frame of size 50 mm x 47 mm made out of 5mm thick plain colour PVC sheet reinforced M.S. square tube, supplying & fixing in opening as per specification & drawing on page no. 178 of SSR Part -II complete all as specified and directed.

S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. square tube for top and bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip 20 mm wide stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in M.S. frame welded /sealed to the stiles and rails with suitable sheet beading, and jointed together with solvent cement, supplying & fixing in the frame at site as per specification and drawing of page no 174 of SSR Part -II complete all as specified and directed.

S&F stainless steel butt hinges medium weight of size 75 mm size complete all as specified and directed.

S&F 150 mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and directed.

S&F Extruded aluminium alloy handles 125 mm long fabricated type anodised complete all as specified and directed .

S&F for aluminium decorative grill of DG -102 complete including taking down existing one all as specified and directed.

Supply and fixing door closer hydraulically regulated designation No. 2 universal type aluminium body, (diecast) suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 Kgs complete all as specified and directed, including taking out old one complete all as specified and directed.

S&F 150mm long floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floors complete, including taking out old one all as specified and directed.

Taking down wooden shutters of windows, ventilators etc of any description or any size and refixing the same in the same opening after replacing of unserviceable screws, Hinge,Hasp and staple, tower bolt etc, as requires at site and tightening complete all as specified and directed. Note:- (a) This work shall be executed urgent basis as and when for complaints received from the users of ND(V). (b) Quted rate is inclusive cost of screws, Hinges, Hasp and staple, tower bolt etc whatever requires at site

Taking down aluminnium shutters of windows, ventilators etc of any description not exc 1 Sqm each and refixing the same in the same opening after replacing of unserviceable screws, cleat, rubber packing, aluminum snap beading etc, and tightening complete all as specified and directed. Note:- (a) This work shall be executed urgent basis as and when for complaints received from the users of ND(V) for complaints received from the users of ND(V). (b) Quted rate is inclusive cost of rubber beading, aluminum snap beading, screws, cleat etc whatever requires at site

Taking down aluminnium shutters of doors, windows of any description exc 1 Sqm but not exceeding 2 sqm each and refixing the same in the same opening after replacing of unserviceable screws, cleat, rubber packing, aluminum snap beading etc, and tightening complete all as specified and directed. Note:- (a) This work shall be executed urgent basis as and when for complaints received from the users of ND(V) for complaints received from the users of ND(V). (b) Quted rate is inclusive cost of rubber beading, aluminum snap beading, screws, cleat etc whatever requires at site.

S&F brass mortice lock, 4 lever, vertical type, size 100 mm including taking down old one complete all as specified & directed

Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified and directed.

S&F anodised aluminium snap grid frame work of size 605x605mm using main and cross tee of size 15mm x 15mm 1.5mm ( weight not less than 0.12 kg / Rm) and wall angle of size 40mm x 25mm x 2mm ( weight not less than 0.36 kg / Rm) and 10mm non asbestos fibre cement building boards fixed or laid/ inserted to timber/GI/Aluminium framework with screws, in ceiling with hanger 6mm dia GI (up to 1200mm length) adjusting level fixed to roof slab by means of ceilng cleats made out of GI flat 40 x 3mm size 60mm long and expansion hold fastners 12.5mm dia 40mm long complete , including cover fillets complete all as specified and directed.

S&F PVC tank cover of any size including taking down old one complete all as specified and directed

Cleaning of PVC water storage tank n. exc. 500 litres capacity by taking down existing inlet and outlet pipes setting aside the tank and cleaning, rubbing down and removing all scales and dirt, mud and any other foreign materials etc from inside complete incl writing letter on PVC tank as TANK CLEANED ON ____ Dt, Month and year complete all as specified and as directed.

Cleaning of PVC water storage tank exc. 500 litres but n. exc. 1000 litres capacity by taking down existing inlet and outlet pipes setting aside the tank and cleaning, rubbing down and removing all scales and dirt, mud and any other foreign materials etc from inside complete incl writing letter on PVC tank as TANK CLEANED ON ____ Dt, Month and year complete all as specified and directed.

Cleaning of PVC water storage tank exc. 1000 litres but n. exc. 2000 litres capacity by taking down existing inlet and outlet pipes setting aside the tank and cleaning, rubbing down and removing all scales and dirt, mud and any other foreign materials etc from inside complete incl writing letter on PVC tank as TANK CLEANED ON ____ Dt, Month and year complete all as specified and as directed.

Cleaning of PVC water storage tank exc. 2000 litres but n. exc. 5000 litres capacity by taking down existing inlet and outlet pipes setting aside the tank and cleaning, rubbing down and removing all scales and dirt, mud and any other foreign materials etc from inside complete incl writing letter on PVC tank as TANK CLEANED ON ____ Dt, Month and year complete all as specified and as directed.

Taking up or down 15 mm bore steel water tubing and connections including cleaning for refixing or removal complete all as specified and directed.

Taking up or down 20 mm bore steel water tubing and connections including cleaning for refixing or removal complete all as specified and directed.

Taking up or down 25 mm bore steel water tubing and connections including cleaning for refixing or removal complete all as specified and directed.

S&F 15 mm dia (outer diameter of the pipe) Unplasticised PVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc., any type of pipe complete all as specified and directed.

S&F 20 mm dia (outer diameter of the pipe) Unplasticised PVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc., any type of pipe complete all as specified and directed.

S&F 25 mm dia (outer diameter of the pipe) Unplasticised PVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc., any type of pipe complete all as specified and directed.

Taking out PVC (SWR) soil waste and vent pipe of any size including all fittings etc complete all as specified and directed

S&F 160 mm dia PVC (SWR) pipes single, socketed, in any length with rubber ring joints fixed to wall complete all as specified and directed

S&F 110 mm dia PVC (SWR) pipes single, socketed, in any length with rubber ring joints fixed to wall complete all as specified and directed

S&F 75 mm dia PVC (SWR) pipes single, socketed, in any length with rubber ring joints fixed to wall complete all as specified and directed

S&F 160 mm bore PVC (SWR) bends (any radius) with oval access door complete all as specified and directed.

S&F 110 mm bore PVC (SWR) bends (any radius) with oval access door complete all as specified and directed.

S&F 75 mm bore PVC (SWR) bends (any radius) with oval access door complete all as specified and directed.

S&F 160 mm bore PVC (SWR) junction single, (Single T) equal or unequal with oval access door complete all as specified and directed.

S&F 110 mm bore PVC (SWR) junction single, (Single T) equal or unequal with oval access door complete all as specified and directed.

S&F 75 mm bore PVC (SWR) junction single, (Single T) equal or unequal with oval access door complete all as specified and directed.

S&F PVC (SWR) floor trap, 75 mm dia, plain with brass CP grating including jointing with solvent cement fixed including taking down old one complete all as specified and directed

S&F 25 mm dia gun metal globe/gate valve with iron wheel head screwed both ends for iron pipes and fixed in existing position including taking down unserviceable one complete all as specified and as directed.

S&F 20 mm dia gun metal globe/gate valve with iron wheel head screwed both ends for iron pipes and fixed in existing position including taking down unserviceable one complete all as specified and as directed.

S&F 15 mm dia pillar taps, cast copper alloy with capstan head, chromium plated, screwed down, high pressure with or without letter 'Hot' or Cold' with long screwed shanks and fly nuts screwed for iron pipes including taking out old one complete all as specified and directed

S&F 15 mm dia bib taps, cast copper alloy fancy type, chromium plated with crutch or butterfly handle, screwed down screwed for iron pipe of for brass ferrule including taking down old one complete all specified and directed.

S&F 15 mm bib tap, PTMT any colour high pressure screwed for iron pipe and fixed (Minimum weight 15mm-90gms) including taking down old one complete all as specified and directed

S & F in repairs fancy type chromium plated 15 mm bore Stop valves, cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified and directed.

S&F 125 mm size brass chromium plated shower rose fixed to steel pipe or union including taking out old one. complete all as specified and directed

Supply & Fix health faucet 15 mm bore brass chromium plated jet spray with CP pipe of 900 mm long and connector including taking down old one complete all as specified and directed

S&F looking mirror 5 mm thick fitted on 6 mm thick ply wood including decorated beading with varnishes fixed to wooden plugs with chromium plated brass screws and cup washers including taking down old one complete all as specified and directed

M&L 32 mm dia High density polyethylene (HDPE ) pipe of pressure rating 6 Kg /Sq.cm as in waste pipe (Short Length) fixed to wash hand basin waste etc complete to floor including taking out old one all as specified and as directed

S&F vitreous China Wash Basin, white, flat back of size 550 x 400 mm including suitable size of CI brackets, brass chromium plated waste fittings 32 mm dia with long screw shanks and fly nuts, flange and bedded in red lead cement including taking out old one complete all as specified and directed

S&F vitreous China Wash down water closet pan (Pedestal Pattern), white fixed with brass screws with necessary connection with water line and sewer line etc. complete including S&F PVC seat cover for pedestal pan including taking down old one complete all as specified and directed

S&F PVC seat cover white closed pattern with flat bottom and cover and mild steel C.P or Aluminium hinging device for pedestal pan including taking down old one complete all as specified and directed

S&F vitreous China, squatting pan, Orissa Pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) with CI trap of suitable size ( P or S type) including connection to trap and to flushing pipe, anti syphonic pipe etc complete including provision of lime concrete bedding & making good to floor including taking out old one complete all as specified and directed

S&F 10 Ltr capacity PVC valveless syphonic action type flushing cistern low level white, with inlet, ball valve, float and handle including PVC flush pipe and brackets complete fixed in wall and floor to trap of WC including taking down old one complete all as specified and directed.

S&F 15 mm dia PVC connections, 600 mm long with PTMT nuts of suitable size at two end including taking out old one complete all as specified and directed

S&F 15 mm dia PVC connections, 450 mm long with PTMT nuts of suitable size at two end including taking out old one complete all as specified and directed

S&F vitreous China urinals, bowl type, flat back of size 465 x 355 x 265 mm (minimum) white with grating and union for discharge pipe complete including providing and fixing plugs, bedding urinals against wall in CM (1:2), screwing urinal to plug etc., including taking out old one complete all as specified and directed

S&F vitereous china urinal partition white of size 310x700mm etc. including taking out old one complete all as specified and directed

S&F vitreous China urinals, half stall type white,(excluding flushing cistern and flush pipe ) with grating and union for discharge pipe complete including providing and fixing plugs, bedding urinals against wall in CM (1:2), screwing urinal to plug etc. including taking down old one complete all as specified and directed

S&F Urinal spreader of chromium plated push type with PVC pipe for fixing with 15 mm dia pipe including taking down old one. complete all as specified and directed

S&F tubular towel rail 20 mm dia brass chromium plated 'D' type 60 cm long between flange brass CP including taking down old one complete all as specified and directed.

S & F soap dish of chromium plated of 125 mm size fixed to wall with plug & chromium plated brass screw complete including taking down old one all as specified and directed.

Supply & fix brass ball valve 15 mm dia high pressure with polythene float and flynut complete including taking down old one all as specified and as directed

Supply & fix brass ball valve 20 mm dia high pressure with polythene float and flynut including taking down old one complete all as specified and as directed

Supply & fix brass ball valve 25 mm dia high pressure with polythene float and flynut including taking down old one complete all as specified and as directed

S&F corner glass shelf made of 5.0 mm thick sheet glass 300 radius with brass chromium plate bracket guard and railing including taking down old one complete all as specified and directed

Demolition of stone slabs and tiles of any description or thicknes in floors, aprons etc laid bedded and pointed in any mortar complete all as specified and directed.

S&F ventatian roller blinds type 100mm wide including hanging arrangement made up of anodised aluminium channel with acryic mechanism with bottom weight type vista leveler all as per manufacturers instructions and as directed including taking down the worn out venetian blinds complete all as specified and directed.

M&L for 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, win dow-cills, cooking plat forms and like in cement mortar (1:4) including point ing in white cement (1:2) us ing marble dust with admix ture of pigment to match with shade of granite including round edging and marking anti skid cutting lines with cutters on treads, complete all as specified and directed.

Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specified and directed.

S&F powder coated anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete (minimum thickness of powder coating 50 micron) complete all as specified and directed.

S&F 4mm thick figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane complete all as specified and directed.

S&F in repairs stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless wire staples complete all as specified and directed.

S&F in repairs 15 mm bore brass chromium plated pillar cock (swan neck for washbasin) complete all as specified and as directed including taking down old one.

S&F in repairs 15 mm bore brass chromium plated two way Bib tap with flange complete all as specified and as directed including taking down old one.

Please Enable Macros to View BoQ information