New covered conductor work NH east side Kannetty ,Keralafeeds , Karunagappally feeder under Electrical Section Karunagapally South.

(30.1) Stringing of one km 3 PH 11kV line with XLPE Insulated ACSR Raccoon or equivalant (3 conductors) after fitting insulators, binding conductors to pin insulators using suitable tie and anchoring with wedge type anchoring clamps including cutting and removing tree branches wherever necessary excluding cut point works.

(115) Additional rate for providing one disc set, PG clamp etc. complete, on any type of HT pole for making cut point.

(169) Fitting one Additional V cross arm in existing single pole including conveyance of materials.

(170) Fitting one Additional 75x40mm, 1.8m Channel cross arm in existing single pole including conveyance of materials.

(164) Fitting one set (3No.) 11kV LA and giving connections excluding earthing.

(1117) Installation of Insulation piercing connector for main to service line main :25-95 sqmm, Tap : 25-95 sqmm

(30.2) Providing bridging at Cut points for 3 PH 11kV line with XLPE Insulated ACSR Raccoon or equivalent (1 conductors) using IPC and respective conductors

(932) Doing one cable end termination on HT XLPE UG cables of sizes upto and including 3x185 sqmm using the cable jointing kit supplied departmentally after making fencing, caution board and all other safety measures including charges for cable jointer etc. complete as per the direction of the departmental officers.

(955) Providing one Earth using GI earth pipe of size 38.1mm dia, 2.5m length including digging separate pit (0.45x0.45x2.5m) at standard distance (1.5m) away from the pole/structure in ordinary soil & backfilling the pit with 15cm alternate layer of charcoal, salt and sand up to 90cm from the bottom. including the cost of 20kg salt, 25kg charcoal, excluding supply of earth pipe.