Loading
Loading…
Loading…
Tender Value
₹63.0 L
EMD Value
₹1.3 L
Closing Date
2 Sept 2026, 3:00 pm
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
Above/Below/Par
WORKS 2
14 conditions · 3 needing a document upload
Financial Eligibility Criteria: The tenderer must have minimum average annual contractual turnover of V/N or "V" whichever is less; Where V=Advertised value of the tender in crores of Rupees, N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
Electrical contractor license: - The contractor should have valid electrical contractor license issued by government and submit along with tender document. If valid electrical contractor license is not submitted along with tender document, then offer will be summarily rejected.
Technical Eligibility Criteria: (a)The tenderer must have successfully completed or substantially completed any one of the following categories of work(s) during last 07 (seven) years, ending last day of month previous to the one in which tender is invited: (i)Three similar works each costing not less than the amount equal to 30% of advertised value of the tender, or (ii)Two similar works each costing not less than the amount equal to 40% of advertised value of the tender, or (iii)One similar work costing not less than the amount equal to 60% of advertised value of the tender. The Definition of similar nature in this tender means "Any Electrical work related to HT/LT installations". (Authority: PCEE / NWR / JP's letter No EL/50/0/SNW/Vol.I Dtd. 08.01.2016).
3 conditions · 1 needing a document upload
Bidder / Tenderer should submit GST registration certificate along with PAN card & Bank mandate while bidding / uploading tender documents.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
I / We have visited the works site and I / We am / are aware of the site conditions.
Electrical Work in c/w (i) provision of joint SNT Store near BGKT Diesel Shed (ii) provision of electronic interlocking at PLCJ station over Jodhpur Division.
35R4of2025-26~NWR
35R4of2025-26
Open
Works - General
12 Months
Jodhpur, Rajasthan
₹0
₹1.3 L
11 Aug 2026
11 Aug 2026
19 Aug 2026
134 items across 1 schedule
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| — | — | — | 63,01,662.25 | ||
| — | 2.00 | — | — | ||
| Supply, erection, testing and commissioning of 16Mtrs high mast shaft totally hot dip galvanized and suitable for wind velocity as per IS 875 part-3 as per spec (Inspection: Consignee, Inspection Charges Nil ) | — | — | — | 2,77,569.2 | |
| — | 2.00 | — | — | ||
| Design and casting of suitable foundations with M-20concretes for the above 16mtr high mast having the safe soil bearing capacity at site as 10T/sq mtr at 2 meter depth including supply of foundation bolts manufactured from special steel along with nuts, washers and anchor plates and templates(Inspection: Consignee, Inspection Charges Nil ) | — | — | — | 27,589.2 | |
| — | 2.00 | — | — | ||
| Supply & installation of control panel housing suitable timer contactor circuit for Automatic switch ON & switch OFF of the mast at a preset time.(Inspection: Consignee, Inspection Charges Nil ) | — | — | — | 33,535.8 | |
| — | 4.00 | — | — | ||
| Supply and fixing of aviation light luminaires of BGAV 302 LED of Bajaj or similar comprising of aluminium housing with polycarbonate enclosure (1 fitting per mast is necessary if no taller structures are in the vicinity). Fitting should be of reputed make and as per tech. spec. (Inspection: Consignee, Inspection Charges Nil ) | — | — | — | 15,854.04 | |
| — | 8.00 | — | — | ||
| Supply, fixing, testing and commissioning of Distribution Board double door, 3-phase and neutral with incoming 63A 4-pole MCB and outgoing 12Nos. MCB 6-32A single pole as per spec(Inspection: Consignee, Inspection Charges Nil ) | — | — | — | 38,560 | |
| — | 60.00 | — | — | ||
| Installation/shifting testing and connection of ceiling fans along with associated items (Fans will be supplied by Railway). As per specification(Inspection: Consignee, Inspection Charges Nil ) | — | — | — | 3,478.2 | |
| — | 200.00 | — | — | ||
| Supply of material and wiring of shed TP/FP with 1.5 sq mm single core multi- stranded copper wire PVC insulated in conduit 1.5mm thick 19mm size white colour shall be fixed with junction box TEE and 1.5minsq PVC CU cable insulated multi stranded for earth wire and 5/6A,ceiling rose. The conduit shall be fixed with raw plugs/ tied with 14SWG copper wire including connection as per spec.(Inspection: Consignee, Inspection Charges Nil ) | — | — | — | 24,026 | |
| — | 2000.00 | — | — | ||
| Supply and fixing of PVC cable duct 40 x 60 (w x h) 1 M STD slot greenish gray of standard make as per specification(Inspection: Consignee, Inspection Charges Nil ) | — | — | — | 2,08,760 | |
| — | 2200.00 | — | — | ||
| Supply, drawing, testing and commissioning of PVC copper wire 6 sqmm as per specification(Inspection: Consignee, Inspection Charges Nil ) | — | — | — | 77,770 | |
| — | 12.00 | — | — | ||
| Supply, fixing, testing and commissioning of fabricated Feeder Pillar distribution box made of MS sheet 1.6mmthick size 600x300x600mmwith suitable MS stand Copper bus bar of 200Acapacity and 2x63A MCB 4pole as per spec(Inspection: Consignee, Inspection Charges Nil ) | — | — | — | 64,872 | |
| — | 1.00 | — | — | ||
| Supply, installation ,testing & commissioning of MDB with three phase electronic Energy meter, digital ampere meter with CT, selector switch, suitable digital voltmeter and indication lamp with following incoming & outgoing Incoming- MCCB 4 pole 400A,35KA 2 Nos. Outgoing- MCCB 4 pole 250A,35KA-06Nos. as per spec(Inspection: Consignee, Inspection Charges Nil ) | — | — | — | 2,51,730.77 | |
| — | 1.00 | — | — | ||
| L.T. Panel-I Manufacturing, supplying, testing and commissioning of wall/floor mounted (as per site requirement) LT Distribution board with 01 No. 200 Amp. 4 pole 415 Volt, 50 Hz, thermal magnetic MCCB as incoming and 02 No.100 Amp. 4 pole MCCB, 03 Nos. 40/63 Amp. 4 pole MCCB as outgoing. .(As per Specification attached)(Inspection: Consignee, Inspection Charges Nil ) | — | — | — | 1,14,228 | |
| — | 40.00 | — | — | ||
| Supply & fixing of Exhaust Fan 300 mm sweep plastic body of make- Bajaj/USHA or similar (Inspection: Consignee, Inspection Charges Nil ) | — | — | — | 86,694 | |
| — | 260.00 | — | — | ||
| Supply of material & wiring of sub-main with 2x6 sq mm PVC insulated multi-strand ( 84 /.30 mm ) copper conductor cable in existing laid ( surface / recessed ) PVC conduit pipe and continuous running of PVC insulated copper earth wire of 1 Sq.mm. as per specifications attached as required(Inspection: Consignee, Inspection Charges Nil ) | — | — | — | 30,607.2 | |
| — | 660.00 | — | — | ||
| Supply of material & wiring of sub-main with 2x4 sq mm PVC insulated multi-strand ( 56 /0.3 mm ) cooper conductor cable in existing laid ( surface / recessed ) PVC conduit pipe and continuous running of PVC insulated copper earth wire of 1 Sq.mm. as per specifications attached as required(Inspection: Consignee, Inspection Charges Nil ) | — | — | — | 54,984.6 | |
| — | 1480.00 | — | — | ||
| Supply of material & wiring of sub-main with 2x2.5 sq mm PVC insulated (36 /0.3 mm) multi-strand copper conductor cable in existing laid (surface / recessed) PVC conduit pipe and continuous running of PVC insulated copper earth wire of 1 Sq.mm. as per specifications attached as required(Inspection: Consignee, Inspection Charges Nil ) | — | — | — | 96,836.4 | |
| — | 1050.00 | — | — | ||
| Supply and Fixing of 20 mm dia medium class P.V.C. Pipe along with accessories as required in recess on walls/roof properly including cutting of wall /roof and making good the damages as per specifications attached(Inspection: Consignee, Inspection Charges Nil ) | — | — | — | 79,989 | |
| — | 100.00 | — | — | ||
| Supply and Fixing of 20 mm dia medium class PVC Pipe along with accessories as required in surface on walls/roof properly with saddles and wooden gutties etc. complete as per specifications attached(Inspection: Consignee, Inspection Charges Nil ) | — | — | — | 4,991 | |
| — | 10.00 | — | — | ||
| Supply and providing pedestal fan 400mm sweep as per spec(Inspection: Consignee, Inspection Charges Nil ) | — | — | — | 19,995.8 | |
| — | 94.00 | — | — | ||
| Supply, install, test commission of 8Moduler metal flush box with suitable size cover &base frame as per specification(Inspection: Consignee, Inspection Charges Nil ) | — | — | — | 33,746 | |
| — | 55.00 | — | — | ||
| Supply, install, test commission of 4Moduler metal flush box with suitable size cover &base frame as per specification(Inspection: Consignee, Inspection Charges Nil ) | — | — | — | 14,884.1 | |
| — | 24.00 | — | — | ||
| Supply, install, test commission of 3Moduler metal flush box with suitable size cover &base frame as per specification(Inspection: Consignee, Inspection Charges Nil ) | — | — | — | 4,944 | |
| — | 24.00 | — | — | ||
| Supply, install, test &commission of 2 Modular metal flush box with suitable size cover &base frame as per specification(Inspection: Consignee, Inspection Charges Nil ) | — | — | — | 4,101.36 | |
| — | 80.00 | — | — | ||
| Supply, install, test &commission of Modular6amp, specification(Inspection: Consignee, Inspection Charges Nil ) | — | — | — | 10,080 | |
| — | — | — | Pin | ||
| — | — | — | Socket | ||
| — | 140.00 | — | — | ||
| Supply, install, test commission of Modular6amp one way/SP Switch, ISI marked as per specification(Inspection: Consignee, Inspection Charges Nil ) | — | — | — | 9,240 | |
| — | 72.00 | — | — | ||
| Supply, install, test commissioning of Modular 16 amp, 3/3(6Pin) Socket as per specification(Inspection: Consignee, Inspection Charges Nil ) | — | — | — | 14,595.12 | |
| — | 72.00 | — | — | ||
| Supply, install, test commission ofModular16 amp one way/SP Switch , 2 Modular ,ISI marked including connection / wiring on lighting switch board as per specification(Inspection: Consignee, Inspection Charges Nil ) | — | — | — | 10,008 | |
| — | 50.00 | — | — | ||
| — | — | — | 585 | ||
| install, test &commission Consignee, Inspection Charges | :- Supply, | — | — | ||
| — | — | — | plate | ||
| — | — | — | as | ||
| — | 54.00 | — | — | ||
| Supply, install, test & commission of Modular socket type Fan regulator (5step , 2 Modular)including connection/wiring on lighting switchboard as per specification(Inspection: Consignee, Inspection Charges Nil ) | — | — | — | 25,347.6 | |
| — | 320.00 | — | — | ||
| Recessed conduit wiring system-Supply of material and wiring of LP/TP/FP/Exhaust fan/ Bell point with single core multistrend copper conductor size 1.5 Sq.mm in PVC conduit pipe with 5/6 Amp modular type switch/ceiling rose/batten holder etc. As per specification(Inspection: Consignee, Inspection Charges Nil ) | — | — | — | 1,25,312 | |
| — | 400.00 | — | — | ||
| Supply of material & commissioning of PVC casing caping 25X12 mm with accessories for surface wiring as per specification(Inspection: Consignee, Inspection Charges Nil ) | — | — | — | 9,180 | |
| — | 1200.00 | — | — | ||
| supply of 3 Core 2.5 sq. mm PVC Copper Circular Sheathed Cable with Rigid Conductor as per spec(Inspection: Consignee, Inspection Charges Nil ) | — | — | — | 1,32,000 | |
| — | 210.00 | — | — | ||
| Assembling, fixing, hanging and making connection of Surface pendent mounted box type tube light fitting/street light/highbay light or any other light or other fitting as per specification(Inspection: Consignee, Inspection Charges Nil ) | — | — | — | 14,403.9 | |
| — | 6.00 | — | — | ||
| Supply, fixing, testing and commissioning of TPN DB 8-way with provision of incoming MCCB of 125A,IP 43/IK09, double door at suitable locations(Inspection: Consignee, Inspection Charges Nil ) | — | — | — | 86,845.74 | |
| — | 200.00 | — | — | ||
| Supply, Fixing of MCB to be provided in the MCBDB including supply of material as required & as per specifications attached-MCB (SP-) 6-32 A(Inspection: Consignee, Inspection Charges Nil ) | — | — | — | 45,134 | |
| — | 16.00 | — | — | ||
| Supply, Fixing of RCCB to be provided in the MCBDB including supply of material as required & as per specifications attached-RCCB - 25 A/30mA(Inspection: Consignee, Inspection Charges Nil ) | — | — | — | 38,067.84 | |
| — | 12.00 | — | — | ||
| Supply, Fixing of MCB TPN to be provided in the MCBDB including supply of material as required & as per specifications attached-MCB(TPN)-63A(Inspection: Consignee, Inspection Charges Nil ) | — | — | — | 23,688.24 | |
| — | 4.00 | — | — | ||
| Supply, Fixing of MCCB to be provided in the TPN DB given above including supply of material as required & as per specifications attached- MCCB 4-pole 100/125A, 25 KA(Inspection: Consignee, Inspection Charges Nil ) | — | — | — | 52,133.04 | |
| — | 34.00 | — | — | ||
| Supply, install, test & commission of Ray roll plug socket 20amp SPN Ray Roll Plug socket including connection /wiring of "C" series 32 amps SP-MCB as per specification. (Inspection: Consignee, Inspection Charges Nil ) | — | — | — | 28,546.4 | |
| — | 10.00 | — | — | ||
| Supply. fixing, testing and commissioning of SPN DB 8-way with provision of incoming MCB of 63A,IP 43/IK09, double door at suitable locations.(Inspection: Consignee, Inspection Charges Nil ) | — | — | — | 24,056.9 | |
| — | 17.00 | — | — | ||
| "B" Class 50 mm dia GI pipe earth Station with digging pit & refilling with charcoal & salt as per specification(Inspection: Consignee, Inspection Charges Nil ) | — | — | — | 22,110.88 | |
| — | 17.00 | — | — | ||
| Inspection Chamber with cover as per specification(Inspection: Consignee, Inspection Charges Nil ) | — | — | — | 6,166.92 | |
| — | 170.00 | — | — | ||
| Supply & laying of earth connection from earth electrode with 4 mm GI wire properly fixed on wall with wooden gutties etc. as required.(Inspection: Consignee, Inspection Charges Nil ) | — | — | — | 1,871.7 | |
| — | 9000.00 | — | — | ||
| Digging and filling of trench size 0.4 x 0.8 mtr as per spec (trench work may be on kuchcha/ pucca land and all type of soil as per site requirement and without protective layer of brick). Surface of trench shall be made good in all respect and satisfaction of site engineer(Inspection: Consignee, Inspection Charges Nil ) | — | — | — | 3,43,800 | |
| — | 400.00 | — | — | ||
| laying cable in Air/Wall/Pole with fixture(02 specification(Inspection: Consignee, Inspection Charges Nil ) | — | — | — | 9,132 | |
| — | — | — | mtrs) | ||
| — | — | — | as | ||
| — | 2000.00 | — | — | ||
| Laying, connecting & commissioning of cable in pipe/trench etc. with complete lug,glands & transportation of cable etc. as per specification(Inspection: Consignee, Inspection Charges Nil ) | — | — | — | 4,68,300 | |
| — | 9000.00 | — | — | ||
| Supply and laying of HDPE pipe confirming to IS 4984:1995, 50 mm dia, wall thickness 3 mm, PN 6 under the road. The work involves laying of HDPE pipe(Inspection: RITES, Inspection Charges: To be borne by Railways) | — | — | — | 8,33,220 | |
| — | 700.00 | — | — | ||
| Drilling of horizontal bore below track/road by pushing method for laying of RCC/HDPE/DWC pipe of various sizes (As per specifications)(Inspection: Consignee, Inspection Charges Nil ) | — | — | — | 9,35,991 | |
| — | 700.00 | — | — | ||
| Supply & laying of HDPE pipe, dia 160 mm under road/ground/floor/railway track or as per site requirement in already excavated trench. (As per specification)(Inspection: RITES, Inspection Charges: To be borne by Railways) | — | — | — | 5,19,225 | |
| — | 100.00 | — | — | ||
| Supplying., laying of GI pipe size 50 mm dia. B class as per IS1239 for cable use as per specification enclosed(Inspection: Consignee, Inspection Charges Nil ) | — | — | — | 32,317 | |
| — | 10.00 | — | — | ||
| Supplying., laying of GI pipe size 100 mm dia. B class as per IS1239 for cable use as per specification enclosed (Inspection: Consignee, Inspection Charges Nil ) | — | — | — | 6,337 | |
| — | 20.00 | — | — | ||
| J' type cable route marker made of cast iron as per approved Railway drawing. (Inspection: Consignee, Inspection Charges Nil ) | — | — | — | 4,160.2 | |
| — | 200.00 | — | — | ||
| Supply, installation, testing & commissioning of (300 mm width x 50 mm depth x 1.6 mmthickness) perforated Hot Dipped Galvanized Iron Cable Tray (Galvanization thickness not less than 50 microns) with perforation not more than 17.5%, in convenient sections fixed with MS Angle frame duly painted of 35 mm x 5 mm thick and all hardware complete in all respect.(Inspection: Consignee, Inspection Charges Nil ) | — | — | — | 1,88,800 | |
| — | 20.00 | — | — | ||
| Supply, fixing, testing and connecting of wall mounted heavy duty Air Circulator of 24''(600mm) size with built in 3 speed regulator, delivers Air 280Cu.m/min, similar to M/s Almonard make with all accessories complete confirming to IS specification with latest amendments. The Air Circulator is to be fixed by suitable MS clamps of size 50x50x6mm / flats of size 40x6mm with bolts and nuts etc., complete as desired bysite engineer.(Inspection: Consignee, Inspection Charges Nil ) | — | — | — | 1,87,152.2 | |
| — | 20.00 | — | — | ||
| Supply & Erection of 7 mtrs high single arm hot dip galvanized Steel Octagonal "Smart poles" with galvanized base plate of 220 x 220 x 12 mm Foundation PCD 205 & Bolt size (4x20 mm dia X 700 mm) length in position including excavation of pit and filling the same with concrete 50 cm ground level from base plate mounting including supply of material as required The pole shall be galvanized internally & externally by single dipping method .Make BAJAJ, GE, Crompton Greaves, Philips or similar.(Inspection: Consignee, Inspection Charges Nil ) | — | — | — | 2,33,880 | |
| — | 6.00 | — | — | ||
| Supply installation, testing and commissioning of 0.5 HP Mono block Pump as per specification(Inspection: Consignee, Inspection Charges Nil ) | — | — | — | 34,521.36 | |
| — | 35.00 | — | — | ||
| Supply, Testing & Fixing of wall mounted cabin fan with regulator three speed, suitable for 220- 230 volt ,50HZ AC supply .Model No-Media BW 04 of Bajaj or similar to Usha/ Crompton Greaves /Philips (Inspection: Consignee, Inspection Charges Nil ) | — | — | — | 64,500.8 | |
| — | 20.00 | — | — | ||
| Supply of Phenolic top sheet wooden board size 7'' x 4'' with one no. 5x15 amp switch socket combined & one nos. 5 amp switch ISI mark make- Anchor/Vinay/ABB/Cona/Legrand as per specification(Inspection: Consignee, Inspection Charges Nil ) | — | — | — | 2,700 | |
| — | 30.00 | — | — | ||
| Supply of Phenolic top wooden board size 6''x15'' fitted with 4 nos. switch & 4 nos. socket of 6 amps with internal wiring of 1.5 sq. mm with base plate of both side particle board for mobile with hanging clip as per specification(Inspection: Consignee, Inspection Charges Nil ) | — | — | — | 10,440 | |
| — | 1.00 | — | — | ||
| Supply, install, test & commissioning of load change over switch in steel sheet enclosure 250 Amp. (as per specification)(Inspection: Consignee, Inspection Charges Nil ) | — | — | — | 11,928 | |
| — | 35.00 | — | — | ||
| Supply, Fixing, testing and commissioning of LED panel light of size 2'X2' similar to Philips Full Glow model No. RC 380B LED 34S-6500 L60W60 PSD OD S1 or similar(Inspection: Consignee, Inspection Charges Nil ) | — | — | — | 41,300 | |
| — | 30.00 | — | — | ||
| Supply, fixing, testing & connecting of LED backlit double sided signage boards within IP-65 CRCA housing, vinyl print on acrylic sheet which is backlit with high grade, high brightness LED modules, inbuilt SMPS driver, without battery backup, operating voltage 80v-270V AC, life period >50000 hrs, LPM technology, including fabrication and supply of clamping arrangements as desired by siteengineer(Inspection: Consignee, Inspection Charges Nil ) | — | — | — | 76,395.6 | |
| — | 1.00 | — | — | ||
| Supply, fixing and commissioning of 60 Amp. Capacity 240 volts, 50 Hz. for 10 KVA AT automatic Change Over Control and Distribution panels for CLS as per Latest RDSO Specification No. TI/SPC/ PSI/CLS/ 0020 with A & C Slip 1 to 4. CORE approved drawing no.: COS/CORE/ 2005/01 Rev.02 or latest(Inspection: Consignee, Inspection Charges Nil ) | — | — | — | 48,442.14 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
ACS1TO11COMPRESSED1.pdf
ATTACHMENT
SORTECHNICALSPEC35R4of202526
ATTACHMENT
TD35R4of25-26.pdf
ATTACHMENT
SORSNTSTOREBGKTPLCbuildingNIT34R4of2025-26.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].