DMF

Plain Cement Concrete of (1:4:8) propoportion nominal mix (Cement: Fine Aggregate: Coarse Aggregae) using 40mm size HBG M/C (SS5) metal with concrete mixture including cost and cofnveyance of all materias like cement, sand (unscreened), Coarse aggregate, water etc., to site, all operational, incidental and labour charges such as mixing, laying and ramming concrete in nlayers in position not exceeding 15cm, finishing top surface, curing concrete including overhead charges & Contractors profit etc., complete but excluding GST & Seigniorage charges, sales & other taxes on all materials for finished item of work for Foundtions (APSS No. 402)

VRCC M- 25 Design mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20 mm size graded machine crushed hard granite metal (coarse aggregate) from an approved quarry using 340.00 kgs of cement/ 1 cum of concrete including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing concrete, including over head charges and contractor profit but excluding GST & Seigniorage charges etc.,complete but excluding cost of steel and its fabrication charges for finished item of work for Columns.

Filling in basement with HBG stone chips of 2.36 mm and below from an approved quarry/ available sources including all operational, incidenal, labour charges, sales tax and other taxes, hire charges of T & P etc., complete (excluding rock) in trenches, sides of foundations and basement with initial lead in layers not exceeding 15 cm thick, consolidating each deposited layer by watering and ramming including cost and cost and conveyance of water to site including over head charges and contractor profit but excluding GST & Seigniorage charges etc., complete for finished item of work. (APSS NO. 309 & 310)

VRCC M- 25 design mix (Cement:fine aggregate: coarse aggregate) corresponding to IS 456 with cement content of 380 kgs per 1cum of concrete using Weigh Batcher/Mixer with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete, but excluding cost of steel and its fabrication charges including over heads and contractor's profit but excluding GST & Seigniorage charges etc., complete for finished item of work for Lintels

VRCC M- 25 design mix (Cement:fine aggregate: coarse aggregate) corresponding to IS 456 with cement content of 380 kgs per 1cum of concrete using Weigh Batcher/Mixer with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete, but excluding cost of steel and its fabrication charges including over heads and contractor's profit but excluding GST & Seigniorage charges etc., complete for finished item of work for Sunshades 0.60 Mts wide

Providing Brick work In CM (1:6) prop using common burnt clay bricks of cass as per Table-1 of IS: 1077-1992 Non -Modular or traditional size 23X11X7 cm from approved source including cost and conveyance of all materials and labour charges, centering and Scafolding charges and overhead charges and contractors profit but excluding GST etc., complete as per APSS No. 501 for Basement and others but excluding GST and seigniorage charges.

VRCC M- 25 design mix (Cement:fine aggregate: coarse aggregate) corresponding to IS 456 with cement content of 380 kgs per 1cum of concrete using Weigh Batcher/Mixer with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete, but excluding cost of steel and its fabrication charges including over heads and contractor's profit but excluding GST & Seigniorage charges etc., complete for finished item of work for Roof level beams.

VRCC M- 25 Design mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20 mm size graded machine crushed hard granite metal (coarse aggregate) from an approved quarry using 340.00 kgs of cement/ 1 cum of concrete including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing concrete, including over head charges and contractor profit but excluding GST & Seigniorage charges etc.,complete but excluding cost of steel and its fabrication charges for finished item of work for roof slab of 150 mm thickness.

Ornamental plastering with CM (1:3) mix 12 mm thickness in single coat for exposed surfaces of RCC with neat finish including cost and conveyance of all materials like cement, sand, water etc., to site, other taxes on all materials, all operational, incidental such as scaffolding charges including cutting of grooves, finishing, curing, including over head charges and contractor profit but excluding GST & Seigniorage charges etc., complete for for finished item of work.

Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / Mild steel (MS) steel bars Fe 500 grade as per IS 1786-1979 of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with etc., including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials including over head charges and contractor profit but excluding GST & Seigniorage charges etc., complete for finished item of work. ( APSS No.126)

Plastering to brick masonary wall with 12mm thick double coat in CM (1:5) 8 mm thick base coat and CM (1:3) of 4mm thick top coat with dubara sponge finish including cost and conveyance of all material and labour charges, over heads & contractor profit, all operational, incidental such as scaffolding charges, lift charges, including cutting of Grooves,finishing, curing, but excluding GST and seignorage charges, etc., complete for for finished item of work. (APSS 901,903 & 904) (CSSR) for Allround walls

Supply and fixing of medium teak wood fully panelled door of size 2.8 m x 2.10 meters frame made of Scantlings of size 75mmx100mm including labour charges for wrought and put up including fixing of frames and shutters in position, fixing of necessary fixtures etc., for fully panelled door external or internal including cost and conveyance of all materials, all labour charges and all fixtures etc., complete for frames and shutters including overhead charges & Contractors profit etc., complete but excluding GST charges for finished item of work as per standard specifications (APSS NO.1001 & 1002) (CSSR)

Providing Door Frame section of 45 mm x 90 mm. The two Vertical members are to be joined together with the horizontal member using 8mm x 60 mm long MS Star full thread screws to be used with reverse forward speed control hand drilling machine. The ready/assembled door frame is fixed to the wall using hold fast or bolt fasteners. A minimum of 4 Nos., of screws to be provided for each vertical member & minimum 2 Nos., including overhead charges & Contractors profit etc., complete but excluding GST charges for horizontal member.

Providing Door Frame section of 63.50 x 100 MM. The two Vertical members are to be joined together with the horizontal member using 8 x 75 MM long MS Star full thread screws to be used with reverse forward speed control hand drilling machine. The ready/assembled door frame is fixed to the wall using hold fast or bolt fasteners. A minimum of 4 Nos., of screws to be provided for each vertical member & minimum 2 Nos., including overhead charges & Contractors profit etc., complete but excluding GST charges for horizontal member.

Providing and fixing 28 - 30 mm thick solid Wood Polymer Composite (WPC) single extruded Door Frame section of size with encapsulation of 8 MM rigid layer on all the six surfaces. The door frame will have a rebat of 32 MM. Door Frame section of 0.75 mm x 2.10 mm. The two Vertical members are to be joined together with the horizontal member using 8mm x 60 mm long MS Star full thread screws to be used with reverse forward speed control hand drilling machine. The ready/assembled door frame is fixed to the wall using hold fast or bolt fasteners. A minimum of 4 Nos., of screws to be provided for each vertical member & minimum 2 Nos., including overhead charges & Contractors profit etc., complete but excluding GST charges for horizontal member.

Providing and fixing 28-30 mm thick solid Wood Polymer Composite (WPC) single extruded door shutter for door of size 1.05 meters x 2.10 meters with 3 mm top and bottom rigid layer with an overall density of 750 kgs/cum. It will be fixed to the frame using 3 inch /4 inch hinges. A minimum of 4 hinges will be required for fixing the door with the frame including cost and conveyance of all materials, all labour charges and all furniture etc., complete and including overhead charges & Contractors profit etc., complete but excluding GST charges for finished item of work.

Providing and fixing factory made uPVC white colour sliding glazed window up to 1.50 m in height dimension comprising of uPVC multi -chambered frame with in-built roller track and sash extruded Providing and fixing factory made uPVC white colour sliding glazed window up to 1.50 m in height dimension comprising of uPVC multi -chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded inter locks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage ofwater etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge inclusive cost of single/double glass panes, wire mesh and silicon sealent. Three track three panels sliding window with fly proof SS wire mesh (Two nos. glazed & one no. wire mesh panels) made of (small series) frame 92 x 44 mm & sash 32 x 60 mm both having wall thickness of 1.9 ± 0.2 mm and single glazingbead of appropriate dimension (Area of window upto 1.75 sqm including overhead charges & Contractors profit etc., complete but excluding GST & charges etc., complete

Providing and fixing factory made uPVC white colour fixed glazed Ventilators comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge inclusive of cost of Single glass panes and silicon sealant. Fixed Ventilators made of (small series) frame 47 x 50 mm & mullion 47 x 68 mm both having wall thickness of 1.9 ±0.2 mm and single glazing bead of appropriate dimension including overhead charges & Contractors profit etc., complete but excluding GST charges

Providing Flooring with double charged / multi charged stain free full body porcelain vitrified tiles with double layer pigment of Size 600 x 600 mm and thickness between 8-10 mm and 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs but excluding GST etc., complete and including contrractors profit and overhead charges etc., complete for finished item of work.

Providing skirting to internal walls with double charged / multi charged stain free full body porcelain vitrified tiles with double layer pigment of Size 600 x 600 mm and thickness between 8-10 mm and 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs etc., complete, set over base coat of CM (1:3) 12 mm thick with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointed with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand and water etc., complete and including contractors profit and overhead charges but excluding GST etc., complete for finished item of work

Providing impervious coat over RCC roof slab to required slopes with CM (1:3) proportion 20 mm thickness (average) mixed with water proofing compound @ 1Kg/1 bag of cement laid over roof slab when it is green, finished smooth with a floating coat of neat cement and thread lining at regular intervals of 45 cm x 45 cm including cost and conveyance of all materials and all labour charges, including over head charges and contractor profit but excluding GST & Seigniorage charges etc., complete for finished item of work (APSS No. 901 & 903). (CSSR).

Providing and applying synthetic plaster putty or equivalent putty such as birla wall care putty or texture paint or equivalent such as NCL/ Saicoat texture paint of average 2 to 3 mm thickness over plastered surface to prepare the surface even and smooth after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, applying emery paper, Sand the surface, clean & wipe off loose dust, applying putty/ texture paint filler by putty knife / muslin pad, air dry for 2 - 3 hrs for the surface preparation including cost and conveyance of all materials to work site and all operational, incidental, labour charges including overhead charges & Contractors profit etc., complete but excluding GST charges etc. complete for finished item of work

Painting to new interior walls and ceiling in two coats with Plastic Emulsion Paint of Asian/ Berger/ Nerolac or equivelent and shade over a Priming Coat with Cement Primer water base interior Grade -1 or equavalent quality making total 3 coats to give an even shade after thoroughly brushing the surface to remove all loose powdered materials including cost and conveyance of all materials and water to site, sales & other taxes, all operational, incidental and labour charges such as cleaning the surface, painting, curing and including overhead charges & Contractors profit etc., complete but excluding GST charges charges etc., complete for finished item of work. (APSS No.901 & 908)

Manufacuring , Supply and fixing in position of Iron Grill,Iron frame with sheet shutters to door/windows including cost & conveyance of all matrials and all fabrication charges including cutting, welding and including overhead charges & Contractors profit etc., complete but excluding GST charges finishing etc, complete.

Painting to new iron work with two coats of ready mixed synthetic enamel paint Grade-I first quality all shades over a base coat of red oxide primer making total 3 coats in all to give an even shade after thouroughly brushing the surface to remove all remains of loose powdered materials, including cost and conveyance of all materials, site and other taxes, all operational, incidental and labour charges including overhead charges & Contractors profit etc., complete but excluding GST charges for finished item of work.. (APSS No.1201, 1207 & 1212) (CSSR)

Painting 2 Coats with Syntjetoc Enamel Paint to New Wood work over primary coat including cost and conveyance of all materials and labour charges including over head charges & contractor profit but excluding GST charges etc., complete

Supply & applying Melamine Polish Glossy/ Matt finish to the wood works duly cleaning the surface and applying emery paper, Sand the wood with 180 No., emery paper and then with 320 No., emery paper, clean & wipe off loose dust, applying suitable knifing paste filler / wood filler by putty knife / muslin pad, air dry for 2 - 3 hrs, sand with 180 and 320 No., emery paper, apply two component wood sealer, air dry for 24 hrs, Sand with 320 No emery paper, applying one coat of approved spraying thinner (for spraying)/ applying one coat of approved brushing thinner or general purpose thinner (for brushing) and apply (either with spray or brush) two coats of approved brand melamine including cost & labour charges, emery papers, cost of thinner & melamine polish of approved brands such as Jenson & Nicholson, Asian Paints, Berger Paints or equivalent etc., complete and including overhead charges & Contractors profit etc., complete but excluding GST charges for finished item of work.

Construction of Compound wall to Community hall

Earth work excavation for foundations of building and depositing the earth on bank with an initial lead of 10m and initial lift of 2m in ordinary gravelly soils including shoring, strutting, sheeting, planking and dewatering including cost of hire charges of T&P, labour charges etc complete including overhead charges & Contractors profit etc., complete but excluding GST & Seigniorage charges for finished items of work (APSS No 308)

Supply and filling of stone dust of 2.36 mm below size in trenches, sides of foundations and basement with initial lead in layers not exceeding 15 cm thick, consolidating each deposited layer by watering and ramming including cost and conveyance of water to work site and all operational, incidental, labour charges, hire charges of T & P etc., complete for finished item of work. (APSS NO. 309 & 310) including cost and conveyance of all material and labour charges, including overhead charges & Contractors profit etc., complete but excluding GST & Seigniorage charges

Plain Cement Concrete (1:4:8) prop using 40mm size HBG (SS5) metal including Cost and Conveyance of all materials and curing charges but excluding unskilled wages etc., complete for finished item of work for Foundations and Flooring Bed including overhead charges & Contractors profit etc., complete but excluding GST & Seigniorage charges (APSS No. 402)(CSSR)

Reinforced Cement Concrete M-25 Nominal mix (Cement: Fine aggregates: Coarse aggregates) corresponding Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like Cement, fine aggregate( Sand), coarse aggregate, water etc to site and including sales and other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc complete but excluding cost of steel and its fabrication charges for finished item of work, but including centering, shuttering including overhead charges & Contractors profit etc., complete but excluding GST & Seigniorage charges for Columns Footings

Reinforced Cement Concrete M-25 Nominal mix (Cement: Fine aggregates: Coarse aggregates) corresponding Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like Cement, fine aggregate( Sand), coarse aggregate, water etc to site and including sales and other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc complete but excluding cost of steel and its fabrication charges for finished item of work, but including centering, shuttering including overhead charges & Contractors profit etc., complete but excluding GST & Seigniorage charges for Columns Ground level and above ground level beams

Reinforced Cement Concrete M-25 Nominal mix (Cement: Fine aggregates: Coarse aggregates) corresponding Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like Cement, fine aggregate( Sand), coarse aggregate, water etc to site and including sales and other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc complete but excluding cost of steel and its fabrication charges for finished item of work, but including centering, shuttering including overhead charges & Contractors profit etc., complete but excluding GST & Seigniorage charges for Plinth beam

Brick Masonry in CM (1:6) with Non-modular bricks of traditional size 23 x 11 x 7 cm including cost and conveyance of all materials, all labour charges, curing charges and including overhead charges & Contractors profit etc., complete but excluding GST & Seigniorage charges for finished item of work for construction.

Providing high yield strength deformed (HYSD) steel bars (Fe 500 grade as per IS 1786-1985) of 8mm to 40mm diameters, cutting, bending, to required sizes and shapes placing in position with cover blocks of approved size and binding wire of 20SWG, forming grills for reinforcement work as per approved designs and drawings including cost and conveyance of bars from approved sources to site of work, including cost and conveyance of binding wire, cover blocks and all operational, incidental, and labour charges such as cutting, bending, placing in position, tying etc., and sales & other taxes,on cost of all materials complete including overhead charges & Contractors profit etc., complete but excluding GST & Seigniorage charges for finished item of work

Manufacturing ,cost and supply and fixing in posion of M.S Iron Grill for Window including cutting bending and welding and fixing including overhead charges & Contractors profit etc., complete but excluding GST charges etc complete.

Providing Electrification in vaddera Community Building

Supply and fixing of 20 mm dia 2.10 mm thickness heavy grade with IS;9537 part 3 FRLS rigid P.V.C. pipes concealed in roof Slabs with all required accessories including masonary work and labour charges including overhead charges & Contractors profit but excluding GST charges etc., complete.

Supply and erecting fan hook of 12/15mm dia M.S. rod / bar grouted in RCC slab with making the slab as original including cost and conveyance of all materials and all labour charges including overhead charges & Contractors profit but excluding GST charges etc., complete.

Supply and fixing of 25 mm outer dia (2.00 to 2.20 mm) thickness outer daiameter heavy grade with IS;9537 part 3 FRLS rigid P.V.C. pipes concealed in walls with all required accessories including masonary work for light, fan and separate plug points with well seasoned wooden deep box including cost and conveyance of all materials and all labour charges including overhead charges & Contractors profit but excluding GST charges etc., complete for finished item of work.

Wiring with 2 runs of 14/0.3mm (1.0 Sq.mm) Fire Retardant (FR) P.V.C. insulated flexible copper cable (ISI MARK) in existing pipe with 6A switch, Ceiling rose and 3mm thick hylam sheet covering to switch control box including all labour charges etc., complete for light, bell, fan and exhaust fan points in Non-Residential Buildings including overhead charges & Contractors profit but excluding GST charges etc., complete.

Supply and fixing of 6A 3 pin wall plug socket with 6A switch control on a common switch board with earth continuity including wire leads, earth connections along with all labour charges including overhead charges & Contractors profit but excluding GST charges etc., complete.

Supply and fixing of batten holder / angle holder in lieu of ceiling rose of light point complete with all connections and all labour charges with 3.00 Watts LED Lamp etc., complete for finished item of work. (for new installation) including overhead charges & Contractors profit but excluding GST charges etc., complete.

Supply and run of 2 of 36/0.3 mm (2.5 Sq.mm) F.R P.V.C. insulated flexible copper cable in existing pipe for mains inlcuding all labour charges etc., complete for finished item of work including overhead charges & Contractors profit but excluding GST charges etc., complete.

Supply and run of 1 of 22/0.3 mm (1.0 Sq.mm) F.R P.V.C. insulated flexible copper cable in existing pipe for earth continuity inlcuding all labour charges including overhead charges & Contractors profit but excluding GST charges etc., complete for finished item of work.

Supply and fixing SPN Distribution board with IP-20 protection suitable for 40 A DP Isolator (DP) Isolator as incomer and 6-32 Amp 10kA SP MCBs - 6 Nos. as out goings including internal connections and labour charges for surface / flush mounting including overhead charges & Contractors profit but excluding GST charges etc., complete for finished item of work.

Supply and fixing of 20-24W, not less than 1100 mm length LED batten light with extruded alluminium housing and polycarbonate cover, input voltage AC 220 - 260 Volts with F>0.9, Surge protection: 2 KV,THD<15%, with inbuilt driver and frosted cover CCT: 3000 K - 5700 K, minimum CRI>70 etc., complete including overhead charges & Contractors profit but excluding GST charges etc., complete for finished item of work.

Cost, supply and fixing of 1200 mm (48") sweep 230 V, A.C 50 Hz.Ceiling fan with 3 Blades and double ball bearings including giving connections, all labour charges for fixing with all standard accessories including overhead charges & Contractors profit but excluding GST charges etc., complete for finished item of work.

Supply and erecting of stepped type electronic regulators for ceiling fans of 1200 mm sweep complete erected on existing switch board including all labour charges including overhead charges & Contractors profit but excluding GST charges etc., complete for finished item of work.

Supply, transportation and fixing of 20 Watts LED Street light Luminaire made of pressure diecast alluminium body with powder coated, having protective toughned glass including all standard accessories etc., complete including all labour charges for fixing of street light luminaire on wall including giving connections including overhead charges & Contractors profit but excluding GST charges etc., complete for finished item of work.

Providing independent earthing by excavating trench to a depth of 0.90 meters in all soils as per size specified in data using 25 mm daimeter G.I pipe 'B' class with necessary accessories with hume pipe duly providing staggered holes including filling with equal proportion of salt and chorcoal in layers including cost and conveyance of all materials and all labour charges including overhead charges & Contractors profit but excluding GST charges etc., complete for finished item of work.

Supply and Run of 2 of 6 Sq.mm WPSC Aluminium cable along with No.10 SWG G.I bearer wire through PVC cleats with all accessories including labour charges including overhead charges & Contractors profit but excluding GST charges etc., complete for service mains.

Supply and fixing of single phase meter on new peeta board 1 No. including fixing of 1 No., of 63 A 415 Volts rewirable fuse unit and 20A 1 Way 1 Module Modular Switch with Indicator including giving connections including overhead charges & Contractors profit but excluding GST charges etc., complete.

Supply and erection of LED indicator lamps on the existing box / panel board including cost and conveyance of all materials and all labour charges including overhead charges & Contractors profit but excluding GST charges etc., complete for finished item of work. .

Providing Water supply and Sanitation arrangements including fixing of Sub-mersible Motor Pump Set

Cost, supply and delivery of 110 mm diameter 6.00 kgs/cm2 test pressure Unplasticised PVC pipes suitable for potable water supplies conforming to IS 4985/200 (3rd revision) as per specifications including labour charges for laying, fixing and commissioning the PVC pipes including couplers/bends/tees etc., including fixing with necessary fittings like bends, plugs, couplers, juctions, tees etc., with solvent jointing as per standard practise including cost and conveyance of all materials including over head charges and contractor profit but excluding GST charges etc., complete to site for finished item of work at all floor levels.

Cost, supply and delivery of 75 mm diameter 6.00 kgs/cm2 test pressure Unplasticised PVC pipes suitable for potable water supplies conforming to IS 4985/200 (3rd revision) as per specifications including labour charges for laying, fixing and commissioning the PVC pipes including couplers/bends/tees etc., including fixing with necessary fittings like bends, plugsm couplers, juctions, tees etc., with solvent jointing as per standard practise including cost and conveyance of all materials to site for finished item of work at all floor levels including over head charges and contractor profit but excluding GST charges etc., complete

Supply and fixing of 22.20 MM OD pipe premium make Ashirvad/ Ajay/ Astral Flowguard or equivalent CPVC Pipes and Fittings SDR 13.5 to meet the requirement of ASTM-D 2846 and are produced in CTS (Copper Tube Sizes 1/2" to 2") for hot and cold water (IS 15778:2007) including cost and conveyance of all materials to site, labour charges for fixing etc., complete for finished item of work at all floor levels.

Supply and fixing of 28.60 MM OD pipe premium make Ashirvad/ Ajay/ Astral Flowguard or equivalent CPVC Pipes and Fittings SDR 13.5 to meet the requirement of ASTM-D 2846 and are produced in CTS (Copper Tube Sizes 1/2" to 2") for hot and cold water (IS 15778:2007) including cost and conveyance of all materials to site, labour charges for fixing including overhead charges & Contractors profit but excluding GST charges etc., complete for finished item of work at all floor levels.

Supply and fixing of 34.90 MM OD pipe premium make Ashirvad/ Ajay/ Astral Flowguard or equivalent CPVC Pipes and Fittings SDR 13.5 to meet the requirement of ASTM-D 2846 and are produced in CTS (Copper Tube Sizes 1/2" to 2") for hot and cold water (IS 15778:2007) including cost and conveyance of all materials to site, labour charges for fixing including over head charges and contractor profit but excluding GST charges etc., complete for finished item of work at all floor levels.

Supply and fixing of European water closet of 1st quality conforming to IS: 2566 Part - 2, 1973 white glazed with S Trap including fixing of best indian make plasti seat and lid for european water closet with rubber or plastic buffers as per IS 2548-1966, PVC low level system with internal components and short bend 8 litres capacity single flush, 19.05 mm heavy duty NP stop cock Indian make with ISI mark, C.P. flange, PVC flexible pipe including cost and conveyance of all materials to site and all labour charges including over head charges and contractor profit but excluding GST charges etc., complete for finished item of work.

Supply and fixing of Orissa Pan white glazed water closet of size 580 mm x 440 mm 1st quality conforming to IS: 2566 Part - 3, 1981 of makes Hindustan/Nycer/Parryware white glazed with P OR S Trap including cost and conveyance of all materials to site and all labour charges including overhead charges & Contractors profit but excluding GST charges etc., complete for finished item of work.

Supply and fixing of Indian make flat back Wash Hand Basin 1st quality conforming to IS: 2566 Part - 4, 1972 with waste fittings like rubber plug, chain, 32 mm nominal size C.P. fitting with parallel pipe thread conforming to IS 2963-1979 and fitted with 15 mm nominal bore chromium plated pillar tap of 1st quality Indian make 400 grams complete with standard CI brackets including wooden block 450 mm x 300 mm single CP Pillar cock including fixing of 19.05 mm heavy duty NP stop cock Indian make with ISI mark, C.P. flange, PVC flexible pipe and including cost and conveyance of all materials to site and all labour charges including overhead charges & Contractors profit but excluding GST charges etc., complete for finished item of work.

Supply and fixing of 12.7 mm N.P bib tap Indian make heavy duty short body including fixing of CP flange including cost and conveyance of all materials and all labour charges including overhead charges & Contractors profit but excluding GST charges etc., complete for finished item of work.

Providing and placing on terrace (at all levels) polyethylene water storage tank with double layer approved brand and manufacture with cover and suitable locking arrangement and making necessary holes for inlet and outlets and over flow pipes but without fittings and base suppport for tanks conforming to IS 12701-1996 including overhead charges & Contractors profit but excluding GST charges etc., complete for finished item of work.

Supply and fixing NP soap dish heavy type with NP screws including all charges including overhead charges & Contractors profit but excluding GST charges etc., complete.

Cost, supply and fixing of 20 mm diameter PPR ball valve conforming to DIN standards 8077/8092 including overhead charges & Contractors profit but excluding GST charges etc., complete for finished item of work.

Cost, supply and fixing of 25 mm diameter PPR ball valve conforming to DIN standards 8077/8092 including over head charges and contractor profit but excluding GST charges etc., complete for finished item of work.

(No.of items 66) only