EC 07 WB SMH 2023 24 074

Amount

Removal of existing false ceiling (including board & frame work) & disposal of the boards only beyond the compound, in conformity with the Municipal / Corporation Rules for such disposal, loading into truck and cleaning the site & store the metal part (GI / Al) part inside the premises as per direction of Engineer in charge. At any floor & any location.

Plaster (to wall, floor, ceiling, chajjas, beams, columns etc. at any height & any location) with sand and cement mortar including rounding off or chamfering corners or making groove lines for beams & columns as directed and raking out joints including throating, nosing and drip course scaffolding / staging where necessary. With 1:6 cement mortar & avg thickness is 15 mm.

Applying Interior grade Acrylic Primer of approved quality and brand on plastered or cencrete surface old or new surface to receive Distemper / Acrylic emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the EIC. One Coat. Water based interior grade Acrylic Primer. The primer must have alkali, damp, seepage & effloresence resistance, good sealing properties. Approved brand Asian Paints, Berger & Dulux.

Applying Acrylic Emulsion Paint of approved make and brand on walls and ceiling including sand papering in intermediate coats including putty (to be done under specific instruction of Superintending Engineer) : Two Coats. Standard Quality. The paint must have low VOC, high sheen, anti fungal, anti fading, minimum porosity & scrub resistance. Approved brand Asian Paints, Berger & Dulux.

Rendering the surface of walls and ceiling with white cement based wall putty of approved make and brand(1.5mm thick). Approved Brand Asian Paints, Berger, Birla White, JK.

Supplying Fitting & Fixing vertical Blinds in widow shutter made of 100mm wide laminated fabric (Mac pentagon or equivalent assembled on top aluminium frame 35mm x 28mm x 1.20mm) powder coated with high quality nylon runners with auto clutch mechanich stainless steel master runners stiller chains and PVC end covers the bottom and fabrics are suspended with a height which are to be connected by kink as direction of Engineer in charge. As per approved brand.

Supplying and affixing optically clear polyester sun control window / door film having acrylic pressure sensitive adhesive on one side & an acrylic abrasion resistant coating on the other, with composition of infrared absorbing carbon & free from any optical defect. The film characteristics should conform to ASTM E308, ASTM E903, ASTM E84 and ASHIRAE. The film should be pasted after preparatory works without any cracking, delamination, bubbling, discolouring and variation in total transmission of light across the width at any portion along the length doesn't exceed 2% over the average including scaffolding & relevant others to complete in all respect as per manufacturer's specification & direction of Engineer -in- harge. Normal Quality : Film Thickness - 1.0 Mil, Glare Reduction > 45%, U factor < 1.15. At any floor & any location. As per approved brand.

Providing and fixing exterior quality Aluminium Composite Panel (ACP) wall cladding on existing Al. /MS frame work with GI brackets, ACP fixed on the existing frame work by folding the edges of ACP panel (Engraving the rear surface of ACP sheet) with CP angles, cleats and strainless Steel screws forming groves at the periphery of ACP panel. Such grooves filled with foam and silicon sealant etc. complete with all materials (but including the cost of silicon sealant), labour, scaffolding and all other incidental charges complete in all respect as per specification and direction of Engineer-in-charge. (Mode of payment is on finished surface area of ACP). As per approved brand.

Wood work in posts, post plates, rafters, battens, truss members, purlins etc. fitted and fixed complete (excluding the cost of bolts, paints, but including the cost of nails, screws etc.) (The quantum should be corrected upto three decimals). Other Local Wood.

Supply, fitting & fixing of seat & back cover (clothes) for Multi task / Revolving / Executive chairs, using approved cloths. The rate is inclusive of removing the old clothes if required. As per approved brand.

Taking out shutter of aluminium glass door / window or wooden door, dismantling by parts (for repair or replacement of damaged parts), reassembling and refitting and rehanging same with old fittings but with new screws as necessary. At any floor & any location.

DEBASIS PALUI

RAMPADA DAS

M/S.R.S.CONSTRUCTION

M.S.ENTERPRISE

L. R. ENTERPRISE