Restoration of LWSS Har Pukhar

Amount

Excavation in foundation, trenches etc. in earth work in all kinds of soil lift upto all height, stacking the excavated soil not more then 3 mtrs. clear from the edge of excavation & then returning the stacked soil in 15cm layers when required into plinth sides of foundation etc. consolidating each deposited layer by ramming & watering and then disposing of all surplus excavated earth as directed within all leads and lifts.

Pick jumper work

Providing and laying cement concrete 1:4:8 (One cement : four sand : eight graded stone aggregate 40mm nominal size) excluding the cost of centering and shuttering in foundation and plinth.

Random rubble masonarycoured with hard stone of approved qulity in c.m 1:6 (1 cement 6 sand) in foundation and plinth i/c all leads and lifts.

Brick work using common burnt clay building bricks in foundation and plinth in cement mortar 1:6(One cement : six sand) of 2nd class bricks complete within all leads and lifts.

(2nd class bricks).

Providing form work with steel plates 3.15mm thick welded with angle iron in frame 30x30x5mm, so as to give a fair finish including centring, shuttering, strutting and propping etc. with wooden battons and ballies, height of propping and centring below supporting floor to ceiling not exceeding 4.00mtrs. and removal of the same for in-situ-reinforced and plain concrete work in:-

Flat surfaces Complete in all respect.

Providing and laying cement concrete 1:1:5:3 (1 cement: 1.5 sand : 3 graded stone aggregate 20mm nominal size) and curing cmpete E/C from work and reinforcement reinforced cncrete work in:-

Suspended floor roof Landing etc. and shelves and their supports balconis, beams, girder, brassumers and cantilever upto floor two level with in all leads in lifts.

providing tor steel for RCC work i/c bending ninding and placing in position with in all lead and lifts.

Boulder filling under floor i/c all lead and lifts complete in all repect.

6mm thick cement plaster to ceilling c.m 1:3 (1 cement : 3 sand).

Manufacturing & fixing of fencing pannel of size 1.20 X 1.80X of jali 25x25 mm mesh welded to M.S black tube 32mm dia 14 gaude with M.S flat cover 0x3 mm M.S hold fasts 7 No's made put of M.S flat 32x5 mm including cutting,welding,painting with red oxide paint complete in all respecet and as per irection on engineer-in-Charge.

Pdg & fixing GI coated pressed steel door Frames door, window clestory window frame manufactured from commercial mild sheet sheet of 1.60mm thick i/c hinges JAMB, BEED& IF Requred angle thresold of mild steel angle iran section 50 x 25 or base tile of 1.60 mm thickness pressed mild steel welded or regidly fixed togather by mecanicay means ardjustable lungs with spit and tails to each jamsi/c steel butt hines 2.5 t wit guard lockstrike plare& shock as specified and applying a coat of approved steel primer after pretreatment of te surface as directed by Engineer-in-charge,

pdg & fixing .1.00mm thick m.s sheet garrage door with frames 40x40 x6mm angle iran shutters for 3.15mm thick gusset plate at the junction and corner all necessary fitting comp i/c applying a priming coat of red with necessary secrews comp in all respect.

Cement concrete flooring 1:2:4 (1cement :2 sand :4 aggregate 20mm nominal size) laid in one layer finised with a floating coat of neat cement

40mm thick

Distempring (two coats) with oil bounbd washable distemper of approved brand and manufacture and of required shade on up-decored wallsurface to give and even shade over and i/c a priming coat with distemper primer of approved brand and manufacturer after throughly thge surface comp in all respect.

Finishing wall with water proofing cement paint of approved brand & manufacture and of required shade on undecorated wall surface (two coats) to give an even shade after throughly brushing the surface to remove all dirt and remains of loose powdered material within all leads and lifts.

Painting two coat excluding priming coat on new steel and other metal surfaces with ready mixed paint and brushing to give an even shade including cleaning of all dirt,

roviding and fixing SFRC man hole cover with locking arrangment complete in all respect with in all leads to the entire satisfaction of engineer in charge.

Providing and fixing to wall celling and floor galvanised mild steel tube ( Heavy grade) tube fitting and ciamp i/c making good the wall, celling and floor.

15 mm dia

Providing and fixing flow trap i/c all accessories comp. in all respect.

Providing and fixing G.I elbow i/c all accessoeries comp. in all respect.

15 mm dia

Providing and fixing G.I tees 15x15 mm dia i/c all accessories comp. in all respect.

15x15 mm dia

Providing and fixing G.I socket 15mm dia i/c all accessories comp. in all respect.

Providing and fixing PVC pipe i/c all accessories comp. in all respect.

Providing and fixing angle cock i/c all accessories complete in all respect.

Providing and fixing angle Indian seat with cistern along with complete in all respect.

SARVAGYA GOVT CONTRACTOR (BID ID -498432)

M/S Surjeet Singh Govt. Contractor (BID ID -498953)