Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹14.7 LAccepted-AOC | L1 | Accepted-AOC Lowest Bidder | |
| 2 | L2₹16.9 L+₹1.8 L (11.6%)Rejected-AOC 32 LOOTERY MOHAL ORDERLY BAZAR PO BARRACKPORE DIST 24 PARGANAS NORTH KOLKATA 700 120 W B | KOLKATA | 24 PARGANAS NORTH | WEST BENGAL | 700120 | L2 | Rejected-AOC High Rate | |
| 3 | L3₹17.1 L+₹2.0 L (13.1%)Rejected-AOC | L3 | Rejected-AOC High Rate | |
| 4 | L4₹17.4 L+₹2.2 L (14.8%)Rejected-AOC 71 A LOOTERY MAHAL ORDERLY BAZAR PO BARRACKPORE DIST 24 PARGANAS N KOLKATA 700120 WB | 24 PARAGANAS NORTH | WEST BENGAL | 700120 | L4 | Rejected-AOC High Rate | |
| 5 | L5₹17.4 L+₹2.3 L (14.9%)Rejected-AOC 296 N 183 2 JOGEN GANGULY STREET MONIRAMPUR BARRACKPORE DIST 24 PARGANAS N KOLKATA 700 120 W B | 24 PARAGANAS NORTH | WEST BENGAL | 700120 | L5 | Rejected-AOC High Rate |
Tender Value
₹15 L
EMD Value
₹30,000
Closing Date
18 Jan 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE AF Barrackpore
GE AF Barrackpore Post Barrackpore Dist 24 Parganas North Kolkata 700120
DAY TO DAY MAINTENANCE OF OTM ACCN AT 6 WING AF UNDER GE (AF) BARRACKPORE
2022_MES_571765_1
8398/BKP/AF OF 2022-23
Open Tender
Civil Works
Item Rate
180 days
GE AF Barrackpore
Class-E,
Category-a(i)
2 documents required · 2 mandatory
₹500
GE AF Barrackpore
₹30,000
Yes
30 Jan 2023
28 Dec 2022
20 Jan 2023
28 Dec 2022
18 Jan 2023
11 Jan 2023
Amount
Demolition of cement concrete (un-reinforced) as in roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work includind removing rubish from site complete all as specified and directed.
Demolition of cement concrete (unreinforced) in ground floors and paving n.exc. 15cm thick (below or above ground level) and removal of rubbish from the site complete all as specified and as directed.
Taking down chowkats or frames with shutters (without taking off shutters from the frame) n.exc 1.5 sqm each complete all as specified and directed.
Taking down door shutters exc 1 sqm and n. exc 2 sqm each and refixing in the same openeing after replacing of unserviceable butt hinges, tower bolt, handle & sliding bolt complete all as specified and directed. Note: Iron mongaries will be measured & paid seperately under respective items here in after.
Resecuring or easing and adjusting without taking down door shutters for easy closing / opening, end tightening of butt hinges in position, adjustement of butt hinges in position, adjustement of existing iron mongry, size of shutter exc 1 sqm and n. exc 2 sqm each complete all as specified and directed.
Supply and fix solid PVC door frame of size 50 mm X 47 mm made out of 5 mm plain coloured PVC sheet reinforced with mild steel square tube as per specification and drawing given on MES schedule Part–II (2020) complete all as specified and directed.
Supply and fix factory made PVC door shutters 30mmm thick (Style) consisting of frame made of MS tube for top and bottom rails MS frame shall be covered with heat moulded plain colour PVC `C' channel having a PVC sheet strip of 20 mm width Stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement, supplying and fixing in the frame at site as per specification and drawing complete all as specified and directed.
Supply and fix 75mm size butt hinges medium weight cold rolled mild steel complete all as specified and directed.
Supply and fix in repair 100mm size butt hinges medium weight cold rolled mild steel complete all as specified and directed.
Supply and fix 100mm long aluminium anodized barrel tower bolts of extruded section complete all as specified and as directed.
Supply and fix in repair 200mm long aluminium anodized barrel tower bolts of extruded section complete all as specified and as directed.
Supply and fix 150mm size aluminium alloy handles, fabricated type extruded section complete all as specified and as directed.
Supply and fix in repair 150mm size aluminium alloy handles, fabricated type extruded section complete all as specified and as directed.
Supply and fix in repair 300mm mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.
Supply and fix in repair 300mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy complete all as specified and directed.
Supply and fix in repair 25 mm dia aluminium anodised decorative type drapery rod including curtain rings approx 08 Nos rings per RM and side cups including fixing arrangement with drilling hole in walls, brackets etc complete all as specified and directed.
Supply and fix in repair venetian blinds, vertical type 100 mm wide including all accessories like hanging arrangement of anodised aluminium channel with acryllic mechanism, bottom weight of type complete all as specified and directed.
Supply and fix in repair stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.
Material and labour for welding in repairs n. exc 2.5cm in length, thickness of metal to be welded not exc 6mm complete all as specified and directed.
Supply and fix in repair aluminium (extruded section body) door closer hydraulically regulated, designation No-3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg complete all as specified and directed.
Supply and fix in repair anodized aluminium frames for door, window , ventilators with one or more rebates including joining cleats for fixing etc complete all as specified and directed.
Supply and fix in repair anodised aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading screws etc complete all as specified and directed.
Supply and fix in repair anodised aluminium ventilator shutters, top hunge type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etccomplete all as specified and directed.
Supply and fix in repair anodised aluminium ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etccomplete all as specified and directed.
Supply and fix in repair anodised aluminium window shutter sliding type section not less than 0.55 Kg/RM, consisting three shutter two glazed and one gauged including joining cleat, glazing cleap,rubber packing aluminium snap beading, screws, locking arrangement complete all as specified and directed.
Material and labour for 25mm thick PCC (1:2:4) type B-0 (using 12.50mm graded stone aggregate) as in sub base of floor to receive tiles complete all as specified and directed.
Material and labour for non skid ceramic coloured tiles (premium quality) 7 to 8mm thick (square or rectangular) area of each tile exc. 0.11 sqm but not exceeding 0.18 sqm as in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles laid over and including 15mm thick screed bed in cement mortar (1:6) complete all as specified and directed.
Material and labour for joint free glazed ceramic coloured tiles (premium quality) of size 350 x 250x 7mm / 450 x 350 x 7mm thick on walls as in dados/skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles laid over and including 10mm thick plaster in cement mortar (1:4) including dismantling of floor hearth or wall tiling including cement mortar bedding (but not backing ) and removing rubbish from site complete all as specified and directed.
Material and labour for granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone laid over and including 15mm thick screed bed in cement mortar (1:6) including grinding and polishing including cement mortar bedding (but not backing ) and removing rubbish from site complete all as specified and directed.
Material and labour for roof guard high performance elastomeric cementitious water proof coating in two layer application complete all as specified and directed.
Material and labour for 15mm thick screed bed or bedding layer in cement mortar (1:4) for receiving water proof coating complete all as specified and directed.
Supply and fix 3mm thick sheet glass,ordinary quality and glazing with oil putty in square n exc 0.5 sqm in each pane including hacking out old broken glass of any description complete all as specified and directed.
Supply and fix 3mm thick frosted sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sqm in each pane including hacking out old broken glass of any description complete all as specified and directed.
Supply and fix in repair PTMT mirror cabinet of size 350 x 445 mm complete all as specified and directed.
Supply and fix in repair 75mm dia cast iron nahani trap with gratings including joining to waste pipe fixed in cement concrete type B1 (1:2:4) (using 20 mm graded stone aggregate) complete all as specified and directed.
Repair of pillar cock, bib taps, stop valves, 15/20mm dia for making it fully functional and leak proof by replacing the defective parts i.e. rubber washers, Caps/Heads chromium plated marked with/without cold and hot, brass jumper valve complete all as specified and directed. Note:- Quoted rate shall be inclusive for supply of defective parts.
Supply and fix in repair 15mm bore double lever centre hole basin brass CP mixer without pop up system with 450mm copper tube for hot and cold water screwed down for iron pipe complete all as specified and directed.
Supply and fix in repair 15mm bore brass wall mixer telephonic with "L" bend (provision for overhead shower / hand shower) without popup waste system with 450 mm long copper pipe complete all as specified and directed.
Supply and fix in repair 15mm bore brass telephonic hand shower chromium plated with 1.5 mtr flexible tube and hook complete all as specified and directed.
Supply and fix in repair 15mm bore brass angle valve chromium plated for iron pipe complete all as specified and directed.
Supply and fix in repair 15 mm dia bib taps, fancy type,chromium plated with crutch or butterfly handle, screwed down complete all as specified and directed.
Supply and fix in repair 15 mm dia stop valves , fancy type, chromium plated with long shank and cup, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or unions complete all as specified and directed.
Supply and fix in repair 15 mm dia PVC connection with PTMT nuts of length 450 mm complete all as specified and directed.
Supply and fix in repair 15 mm pillar taps cast copper alloy, fancy type with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe complete all as specified and directed.
Supply and fix in repair brass chromium plated shower rose 125mm size with or without swivel joint complete all as specified and directed.
Supply and fix in repair 32mm dia waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed.
Supply and fix in repair 32mm dia waste coupling of PTMT (half or full threaded) (minimum weight 45gms) complete all as specified and directed.
Supply and fix in repair 32 mm dia PVC flexible waste pipe of 800 mm long complete all as specified and directed.
Repair to low level flushing cistern PVC or chinaware for making it fully functional and leakproof by replacing the defective parts i.e. PVC syphon kit, Syphon washer and adjustment level with hook complete all as specified and directed. Note:- Quoted rate shall be inclusive for supply of defective parts of flushing cistern.
Supply and fix in repair PVC long bend for low level flushing cistern of any size and capacity complete all as specified and directed.
Supply and fix in repair plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed.
Supply and fix in repair vitreous china bowl urinal flat back, size of 465x355x265 mm white (minimum),with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) complete all as specified and directed.
Supply and fix in repair vitreous china wash hand basin, flat back, size 630x450mm white, excluding taps, waste, chain and plug and porcelain stopper but including brackets complete all as specified and directed.
Supply and fix in repair vitreous china white wash down water closet pan (pedestal pattern) with ‘P’ or ‘S’ trap, front or back inlet, fixing bolts and making all necessary connections including plastic water closet white seat cover complete as specified and directed.
Supply and fix in repair health faucet 15 mm dia (ABS chromium plated pipe) pipe including 1.25 mtr long PVC flexible tube and ABS wall hook complete all as specified and direted.
Supply and fix in repair brass chromium plated toilet paper holder complete all as specified and directed.
Supply and fix in repair soap dish, brass chromium plated of approximate size 100x80 mm complete all as specified and directed.
Supply and fix in repair PTMT towel rail 600mm long with chromium plated brass screw and wooden or plastic cleats etc complete all as specified and directed.
Supply and fix in repair 125mm PTMT grating doom with waste hole (minimum weight 40gms) complete all as specified and directed.
Supply and fix in repair shelf of PTMT fixed with and including chromium plated brass screws and wooden / plastic cleats (minimum weight 300gms) complete all as specified and directed.
Supply and fix in repair 10 Ltr capacity PVC valve less symphonic action type flushing cistern, low level with inlet, ball valve, float all as specified including necessary flush pipe complete all as specified and directed.
Disconnecting existing tanks of capacity exc 250 litre but not exc 500 litre, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position complete all as specified and directed.
Disconnecting existing tanks of capacity exc 500 litre but not exc 1000 litre, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position complete all as specified and directed.
Supply, hoist and fix 500 litre capacity rotational moulded polyethylene water storage tanks three layered (cylindrical vertical with closed top) including 20mm dia ball valve high pressure high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed (minimum weight 210 gm) after dismantling of old existing tank complete all as specified and directed.
Supply, hoist and fix 1000 litre capacity rotational moulded polyethylene water storage tanks three layered (cylindrical vertical with closed top) including 20mm dia ball valve high pressure high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed (minimum weight 210 gm) after dismantling of old existing tank complete all as specified and directed.
Supply and fix in repair 20mm dia ball valve high pressure high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed (minimum weight 210 gm) complete all as specified and directed.
Supply and fix in repair 20mm bore gun metal globe or gate valve, with iron wheel head, screwed both ends for iron pipe complete all as specified and directed.
Taking up or down 15 mm bore steel tubing and connections, including cleaning for refixing or removal from site complete all as specified and directed.
Refixing only 15mm dia old steel tubing and connection in new or old position (wall,floor,ceiling etc) complete all as specified and directed.
Supply and fix 15 mm GI tubes (medium grade) with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.
Taking up or down 20 mm bore steel tubing and connections, including cleaning for refixing or removal from site complete all as specified and directed.
Refixing only 20mm dia old steel tubing and connection in new or old position (wall,floor,ceiling etc) complete all as specified and directed.
Supply and fix 20 mm GI tubes (medium grade) with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed.
Supply and fix in repair 15mm dia GI Nipple 150mm long both ends screwed suitable for PVC tank complete all as specified and directed.
Supply and fix in repair 20mm dia GI Nipple 150mm long both ends screwed suitable for PVC tank complete all as specified and directed.
Supply and fix in repair 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints etc fixed to walls or laid on floors / trenches complete all as specified and directed.
All as per item No 70.00 here in before but 75mm bore and -ditto-.
Supply and fix in repair 110mm bore PVC (SWR) bends of any radius with access door complete all as specified and directed.
Supply and fix in repair 75mm bore PVC (SWR) bends of any radius with access door complete all as specified and directed.
Supply and fix in repair 110 mm bore PVC (SWR) junction single, (single T) equal or unequal with access door complete all as specified and as directed.
Supply and fix in repair 75 mm bore PVC (SWR) junction single, (single T) equal or unequal with access door complete all as specified and as directed.
Supply and fix in repair 75 mm bore PVC (SWR) vent cowl complete all as specified and as directed.
Supply and fix in repair stack clamps suitable for 75 mm bore pipe made out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof complete all as specified and directed.
Supply and fix in repair stack clamps suitable for 110 mm bore pipe made out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof complete all as specified and directed.
Supply and fix in repair kitchen stainless steel sink, 1.00 mm thick with plug, waste pipe, washers, including cantilever cast iron brackets, connecting union etc., overall size 495 mm x 420 mm with bowl size 410mm x 330mm x 160mm complete all as specified and directed.
Das and Brothers
CHANDRA CONSTRUCTION AND CO
KUMAR ENTERPRISE
M/S A. J. CONSTRUCTION
BHAUMIK CONSTRUCTION
PIONEER
NC BOSE AND CO
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .