Loading…
Loading…
Tender ID
Tender Value
₹61.2 L
EMD Value
₹61,500
Closing Date
5 Feb 2026, 6:00 pmClosed
Superintending Engineer, P H. Mechanical Circle, Ahmedabad
Repairing of India Mark-II Hand Pump installed at various villages with providing of manpower, light / medium Fourwheeler commercial vehicle with Diver, POL, Insurance, Fitness certificate, PUC etc. including supply of Hand Pump spares as per IS 15500 with latest amendment and 32 mm NB ISI marked medium duty GI Pipe in Khedbramha, Poshina& Vijaynagar Taluka of Sabarkantha District for One Year.
267337
04/2025-26 (Re-invite)
Open
Water Equipments/ Meter/ Drilling/ Boring
Works
Ahmedabad
6 documents required · 6 mandatory
₹2,400
Executive Engineer, Public Health Mechanical Division, GWSSB, Himmatnagar
₹61,500
20 Jan 2026
20 Jan 2026
20 Jan 2026
5 Feb 2026
20 Jan 2026
: Name Of Work :
Repairing of India Mark-II Hand Pump installed at various villages with providing of
manpower, light / medium Four-wheeler commercial vehicle with Diver, POL, Insurance,
Fitness certificate, PUC etc. including supply of Hand Pump spares as per IS 15500 with
latest amendment and 32 mm NB ISI marked medium duty GI Pipe in Khedbramha, Poshina
& Vijaynagar Taluka’s of Sabarkantha District for One Year.
Executive Engineer,
Public Health Mechanical Division,
Gujarat Water Supply & Sewerage Board,
Volume III: Price bid Page
NAME OF WORK:Repairing of India Mark-II Hand Pump installed at various villages with
providing of manpower, light / medium Four-wheeler commercial vehicle with Diver, POL,
Insurance, Fitness certificate, PUC etc. including supply of Hand Pump spares as per IS
with latest amendment and 32 mm NB ISI marked medium duty GI Pipe in Khedbramha,
Poshina & Vijaynagar Taluka’s of Sabarkantha District for One Year.
Schedule showing the material lt obe supplied from the store of GWSSB for the work
contracted to be executed at the rates at which they are to be charged.
Sr. Particulars Qty. Rate Rs. Unit Place of
No. Delivery Delivery
(1) The persons of firm submitting the Tender should see that rates in the above schedule are
filled up by the Executive Engineer, on the issue of form prior to the submission of the
(2) Materials which are not included in Schedule 'A' but required for the work shall be brought
by the Contractor at his own cost.
(3) Carting of above materials should be done by contractor at his own cost.
(4) Contractor should return the balance materials, otherwise recovery at the double rates will
be affected in view of Clause 12.4.
(5) Contractor should return all the old dismantled materials other than concrete to dept. store
at his own cost, otherwise recovery will be made for non-return of old dismantled materials
at the rate of current SOR from contractor bill.
Signature of Contractor. Executive Engineer,
P.H.Mech. Division.
Volume III: Price bid Page
NAME OF WORK:Repairing of India Mark-II Hand Pump installed at various villages with
providing of manpower, light / medium Four-wheeler commercial vehicle with Diver, POL,
Insurance, Fitness certificate, PUC etc. including supply of Hand Pump spares as per IS
with latest amendment and 32 mm NB ISI marked medium duty GI Pipe in Khedbramha,
Poshina & VijaynagarTaluka’s of Sabarkantha District for One Year.
Particulars Qty. Unit Amount Rs.
Providing light commercial (medium) four wheeler Diesel vehicle
on rental basis for one day (particularly for H.P repairing works)
1 with Driver & POL(Per day) (The vehicle shall be fully insured with 43 97994
fitness certificate & PUC) with 01 Semi skilled Labour (Per day) &
03 Unskilled Labour (Per day) for year.
2 Handpump Spares
(A) SPARES FOR PUMP HEAD
Hexa. Bolts M-12x1.75x40mm long with Hexa.Nut M- 1500
12x1.75 & Washer 4mm thick
Hex. Bolt M10x1.50x40 mm long 200
Nylock Nut M10x1.50 200
Handle Axle(Stainless Steel) 125
Washer (4 mm thick) for Handle Axle 0
Bearing (No.6204-Z) 450
Spacer(for pump Head) 0
Chain with Coupling 750
Bolt for front cover M-12x20 mm long 30
A- Pump Head Assly.Consi.of Item No.(1) to (7) as per Fig.3.1 20
SPARES FOR CYLINDER
Pump Bucket 750
Sealing Ring 960
Upper Valve Assly comp. consi.of item as per fig 3.6 A (Part 200
Lower Valve Asslycomp.consi.of item as per fig 3.6 B (Part 200
Volume III: Price bid Page
Particulars Qty. Unit Amount Rs.
WATER TANK consi.of item as per fig 3.6 B (1 to 6) 35
Cylinder With Brass Liner consi.of item (a) & (b) 30
REDUCER CAP 350
(F) Spares for Conne. Rods
Hexagonal Coupler M-12 x 1.75 x 50mm 100
(G) UPPER VALVE ASSEMBLY SPARES
Upper Valve Seating 200
Plunger Yoke Body 0
Bucket Spacer 0
Plunger Rod (S & S) 100
Upper Valve (Guide) 50
(H) LOWER VALVE ASSEMBLY SPARES
Check Valve Seat 0
Check Valve Seating 70
Rubber Seat Retainer 0
Handle Bar consisting of Item no (1) & (3) as per Fig 4.6 50
Cylinder AsslyComp.consisting of Item no (1) to (7) as per 100
Conn. Rod Electro Galva.consisting of Item no (1) to (3) as 4000
Special Tool Kit for I. M.-II HandpumpConsi. Item (1) to
(11) as per IS 15500 Part-8 with tool box
Standerd Tool Kit for I. M.-II HandpumpConsi. Item(1) to
(M) (16) as per IS 15500Part-8 with tool box 6340.32 Set
Third plate consisting of Item (1) & (2) as per fig 4.5 0
(O) Spares for deep well Hand pump-Extra Deep
Cylinder Body with Brass Liner consisting of Item no (1) for
body fig 5.2 & (2) for brass linear Fig 6.1 B
Handle Bar consisting of Item no (1) to (3) as per Fig 4.7 0
Volume III: Price bid Page
Particulars Qty. Unit Amount Rs.
Upper Valve Assembly complete consisting of Item no (1) 0
to (11) as per Fig
Follower as per Fig 6.7 0
Bucket Spacer-Lower as per Fig 6.5 0
Manufacture Supply & Delivery of ISI Marked 32 mm dia
medium quality galvanized mild steel tubes (Continuously
welded electric resistance welded (ERW)/high frequency
induction welded (HFIW) /Hot finished welded (HFW) type
screwed at both ends to IS:554/ 1985 for pipe suitable for water
and gas application, socket on one end and other end
protected with plastic thread protector in approximate length
of 3 mtr conforming to IS:1239 (Part-I) 2004 With latest
amendment and socket to conforming to IS:1239 (Part-II)
With latest amendment
Total Cost for one year
1. Contractor has to keep Repairing Teams as per the Para no. 9 of the Information of Tender of the Volume I (GCC).
2. Contractor has to keep number of manpower for each repairing team as per the condition no. 1 of the Special
Condition of the Volume II (Technical Bid).
3. Payment will be made as per the deduction conditions mentioned in the Volume I (General Commercial Terms
I / We am / are willing to carry out work at ____ % ( in figure ) ___________________ (in words )
above / below the tendered estimated rates as mentioned above
Offer for Above Offer for Below
1. Estimate cost Rs:6123455.00 1. Estimate cost Rs:6123455.00
2. Above:____ % Above Rs: _________ 2. Below:____ % below Rs:_________
3.Net amount Rs:_______________ 3.Net amount Rs:_______________
in words( in words(
Executive Engineer,
Signature of Contractor P.H. Mech. Division.
Volume III: Price bid Page
NAME OF WORK: Repairing of India Mark-II Hand Pump installed at various villages with providing of
manpower, light / medium Four wheeler commercial vehicle with Diver, POL, Insurance, Fitness
certificate, PUC etc. including supply of Hand Pump spares as per IS 15500 with latest amendment
and 32 mm NB ISI marked medium duty GI Pipe in Khedbramha, Poshina & Vijaynagar Taluka’s of
Sabarkantha District for One Year.
Payment Schedule for Spare and GI Pipe
Payment should be made as per actual consumption of material at the end of the month
after steps followed as per clause
Payment Schedule for Vehicle with Team
Payment should be made as per actual team with vehicle deployed by contractor per
month as per requirement or as per instructed Engineer in charge at the end of the month
after steps followed as per clause
Note: Penalty of 5% of bill amount will be imposed if agency fails to submit bill with necessary
documents by 10th of every month.
Signature of Contractor
Executive Engineer,
P.H. Mech. Division.
Volume III: Price bid Page
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
RAW_HTML
SD EMD GR 25-26.pdf
Volume II Technical bid Khed.pdf
Volume III Price bid Khed.pdf
Volume I GCC Khed.pdf
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .