Construction of Academic Block library and multipurpose hall at Govt Degree College Pattan Baramulla

Amount

Cutting trees of girth (measured at height of 1mtr above ground level) incl cutting of trunk and branches removing the roots and stacking of serviceable material and disposal of unserviciable material beyond 60cm girth upto and incl 120cm girth.

Earth work in excavation by manual/mechanical means in foundation trenches or drains (not exceeding 1.5M in width as well as 10Sqm on plan/over areas (exceeding 30 cm and upto 1.5 m in depth,1.5 m in width as well as 10 sqm on plan ) including dressing of sides ramming of bottoms lift up to 1.5M including getting out the excavated soil and disposal of excavated soil upto 1mtr from cutting edge in all kinds of soil including pumping out water caused by springs,tidal or river seepage,broken water means or drains and the like complete.

Disposal of excavated soil from site to dumping site i.e GDC singhpora With an avg lead of 5km including loading/unloading ,disposed earth to be deposited in layers,consolidating each deposited layer by raming watering etc complete job

Providing and laying of stone soling hand packed dry including raming with hand ramers,watering all carriage and cost of material involved complete.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering. All work up to plinth level 1:4:8 (1Cement: 4 coarse sand: 8 grade stone aggregate 40mm nominal size) (crushed) including all carriages and cost of material involved.

Providing and laying in position specified grade of reinforced cement concrete excluding C/o centring and shuttering finishing and reinforcement all work upto plinth level 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone agg. 20mm nominal size crushed) including all carriages and cost of materials involved.

Providing and laying Reinforced cement concrete 1:1.5:3 (1 Cement: 1.5 coarse sand: 3 graded Stone aggregate 20mm nominal size) (crushed) in suspended floors, beams, columns, roofs, lintels balconies, landings and staircase excluding cost of centering and shuttering all work up to floor V level including all carriages and cost of materials involved up to site of work complete.

Providing and laying Reinforced cement concrete 1:1:2 (1 Cement: 1 coarse sand: 2 graded Stone aggregate 20mm nominal size) (crushed) in , beams, columns, excluding cost of centering and shuttering all work up to floor V level including all carriages and cost of materials involved up to site of work complete.

Providing and laying in position cement concrete of specified grade excluding C/o centering and shuttering all work upto plinth level in 1:3:6 (1 cement : 3 coarse sand : 6 stone agg. using 20mm nominal size crushed) including curing and all carriages and cost of materials involved.

Reinforcement for RCC works including straightening, cutting, bending placing in position and binding all complete. Thermo Mechanically Treated bars. including all carriages .

Labour Charges for fixning of available rainforcement to be supplied departmentaly incl. bending placing in positon binding etc. all complete (but exceuding the carrinage of departmental supply from Store to Site of Work) Note: The quantities of item No. 10 & 11 may varrey ± 20%

Centering and shuttering including strutting propping etc. and removal of form for foundation footings, bases of columns etc .for mass concrete including all carriages and cost of material involved.

Centering and shuttering including strutting, propping etc. and removal of form work for suspended floors, roofs, landings, balconies and access platforms,stairs using 12mm ply.

Centering and shuttering including strutting, propping etc. and removal of form work for walls,plinth etc using 12mm ply.

Centering and shuttering including strutting, propping etc. and removal of form work for beams,lintels,plinth beams using 12mm ply.

Centering and shuttering including strutting, propping etc. and removal of form work for columns,pillars,posts etc using 12mm ply.

Centering and shuttering including strutting, propping etc. and removal of form work for Edges of slabs and breaks in floors and walls under 20cms wide

Brick work with common burnt clay FPS non modular bricks of class designation 75 upto floor V level in cement mortar 1:6 (1 cement :6 coarse sand) including all carriages and cost of materials involved upto site of work complete.

Providing and fixing of 40X5mm flat iron hold fast 40 cm long including fixing to frame with 10mm dia bolts, nuts and wooden plugs and embeddings in cement concrete block 30X10X15 cm 1:3:6 mix ( 1 Cement : 3 Coarse sand :6 graded stone aggregate 20 mm nominal size) including all carriages and cost of materials involved.

Providing wood work in frames of doors, windows, clesrestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately) Silver or imported kail wood including all carriages..

Structural steel work welded in built up sections , trusses and framed work including cutting, hoisting, fixing in position & applying a priming coat of approved steel primer all complete including all carriages leads lifts etc.

Providing colour coated (HI rib)G. S. sheet roofing fixed with GI self screws with pvc caps of matching colour design and pattern as per directions of Engineer-in -charge bolts and nuts excluding the cost of purlins,rafters and trusses with0.50mm thick including carriages all complete.

Providing coloured ridges /hips of width 60cm overall width plain GS sheets fixed with polymer coated J or L hooks , bolts and nuts 8mm dia GI limpet and Bitumen washers complete 0.50 mm thick including carriages Complete

Providing and fixing of plain eaves boarding 300mm x 40 mm (nominal size) imported kail wood incl cost of nails complete.

15mm Cement plaster on rough side of single or half brick wall of mix 1 : 6 (1 cement: 6 coarse sand) including all carriages.

Providing and applying white cement based putty (Birla or equivalent )of 2mm thickness over plastered surface to prepare the surface even and smooth including all carriages complete

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade. Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture including applying one coat of water thinnable cement primer of approved brand and manufacture and all carriages complete

Providing and fixing Ist qualityCeramic glazed wall tiles confirming to IS : 13753 of minimum thickness 5 mm of approved make like NITCO, ORIENT, KAJARIA, SOMANY or equivalent make in all colours and of any size as approved by Engineer in charge in walls, skirting etc over 12 mm thick cement Mortar 1:3(1 cement:3 coarse sand) and jointing with grey cement slurry @3.3 kg per sqm including pointing in white cement mixed with pigment of matching shade (size of tile as specified by the site Engineer) including all carriages complete.

Providing and fixing ceramic glazed floor tiles 300X300 mm(thickness to be specified by the manufacturers) of 1st quality conforming to IS:13755 of NITCO,ORIENT,SOMANY,KAJARIA,or equivalent make in all colours,such as White,Ivory,Grey,Fume red,Brown sizelaid on 20 mm thick bed of Cement Mortar 1:4 (1 cement:4 coarse sand) and jointed with white cement and matching pigment etc complete including all carriages.

Providing and fixing gang saw cut mirror polished (premoulded and pre polished), machine cut for coridor, landing, kitchen platform, vanity counters window sills facias and similar locations of required size of approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand) with joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing moulding and polishing to edge to give high gloss finish etc. complete at all levels Granite of any colour and shade (Area of slab upto or over 0.5 sqm) 18 mm-20 mm thick including all carriages complete.

Extra for Providing edge Moulding to Granite including machine polishing to edge to give high gloss finish complete job

Providing and laying vitrified floor tiles in different sizes(thickness to be specified by the manufacturer) with waterabsorption less than 0.08% and conforming to 13:15622of approved make in all colours and shades, laid on 20mmthick cement mortar 1:4 (I cement :4 coarse sand)including grouting the joints with white cement andmatching pigments etc. including all carriages complete (size, colour & quaility of Tiles to be got approved by Engineer In-charge)

Providind and fixing 35 mm thick panelled or panelled and glazed shutters for doors,windows and clerestory windows including ISI marked M.S prepared butt hinges bright finished of required size with necessary screws excluding panelling/glazing which will be paid separetely ,all complete including carriages as per direction of engineer-in-charge First class kail wood (imported)

Providing and fixing 35 m thick wire guaze shutters using galavanised M.S wire guaze of average width for aperture 1.4 mm in both direction with wire of dia 0.63 mm for doors,windows and clerestory windows with ISI marked M.S pressed bright finished butt hinges with b necessary screws of required size including carriages complete First class kail wood (imported)

Providing and fixing 35 mm thick panelled door shutters of kail wood including ISI marked M.S prepared butt hinges bright finished of required size with necessary screw including panelling of prelaminated particle board with decorative lamination on both sides,Grade I,type II IS 12823 marked ,all complete including carriages as per direction of engineer-in-charge

Providing and fixing of 3.5mm thick ordinary sheet glass pans to windows and ventillator shutters embeded in putty and fixed with beadings including cost of nails etc and carriages complete

M/S ZAHOOR AND CO.

SIRAJ AHMAD BHAT