Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹37.5 LAccepted-AOC FIRST FLOOR CREATIVE TOWER EROOR POST VYTTILA ERNAKULAM PIN 682 306 | ERNAKULAM | ERNAKULAM | KERALA | 682306 | L1 | Accepted-AOC being lowest | |
| 2 | L2₹40.5 L+₹2.5 L (6.61%)Rejected-Finance PMC 24 528 GROUND FLOOR NEAR PAYYANUR SERVICE CO OP BANK KOTTY BRANCH PAYANNUR KANNUR KERALA 670307 | PAYYANUR | KANNUR | KERALA | 670307 | L2 | Rejected-Finance Other than lowest tenderer | |
| 3 | L3₹41.9 L+₹3.9 L (10.2%)Rejected-Finance | L3 | Rejected-Finance Other than lowest tenderer | |
| 4 | L4₹43.6 L+₹5.6 L (14.8%)Rejected-Finance DOOR NO 3 79 CHENNNADGRAMAPANCHAYAT PERUMBALA KASARAGOD 681317 | PERUMBALA | KASARAGOD | KERALA | 681317 | L4 | Rejected-Finance Other than lowest tenderer | |
| 5 | L5₹43.8 L+₹5.8 L (15.3%)Rejected-Finance C 234 ADG P CHENNAI | L5 | Rejected-Finance Other than lowest tenderer |
Tender Value
₹45 L
EMD Value
₹90,000
Closing Date
5 Dec 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE P EZHIMALA
Garrison Engineer Project Ezhimala INA Ezhimala Post Kannur Dist, Kerala-670310
8118 PROVISION OF STORAGE ACCN AND COVERING OF VARANDHA AT GE OFFICE AT INA EZHIMALA
2022_MES_562035_2
8118/E8
Open Tender
Civil Works
Item Rate
180 days
EZHIMALA
AS PER NIT
8 documents required · 8 mandatory
₹500
GE PROJECT EZHIMALA
₹90,000
Yes
31 Mar 2023
17 Nov 2022
7 Dec 2022
18 Nov 2022
5 Dec 2022
22 Nov 2022
18 Nov 2022 - 21 Nov 2022
Amount
Building work :-Earth work excavation in ordinary rock by mechanical means (Hydraulic excavator) in foundation trenches or drains not exceeding 1.5 m wide not exceed 1.5m in depth etc not exceed in 10 sqm on plan , including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil/rock as directed, within a lead of 50 m, complete all as specified and directed.
Earth work in excavation in hard rock where blasting prohibited by mechanical means (Hydraulic excavator)/ in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 mcomplete all as specified and directed.
Material and labour PCC 1:4:8 type D2 using 40mm graded stone aggregate for foundation, complete all as specified and directed .
Material and labour RCC M-30 using 20mm graded stone aggregate as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete, complete all as specified and directed. Note : Reforcement & Formwork will be measured & paid seprately under relevant items of schedule.
Use & Waste of Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter, complete all as specified and directed.
Material and labour RCC M-30 using 20mm graded stone aggregate as in Columns, pillars, piers, posts and struts, complete all as specified and directed. Note : Reforcement & Formwork will be measured & paid seprately under relevant items of schedule.
Use & Waste of Formwork to sides of pillars, posts, struts, piers, columns and stanchions, complete all as specified and directed .
Material and labour RCC Design Mix M-30 using 20mm graded stone aggregate as in Beams, cantilevers, bressummers, lintels over 1.5m span, complete all as specified and directed . Note : Reforcement & Formwork will be measured & paid seprately under relevant items of schedule.
Use & Waste of Formwork to sides and soffits of floor or roof beams, beam haunchings,girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc, complete all as specified and directed .
Material and labour TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including TMT wire (annealed) not less than 0.9mm dia or securing with clips in columns, complete all as specified and directed .
Material and labour TMT bars 5mm dia and over upto and including 10mm dia as in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including TMT wire (annealed) not less than 0.9mm dia or securing with clips in columns, complete all as specified and directed .
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in soft disintegrated rocks, complete all as specified and directed .
Material and labour Pre-cast cement concrete block masonry with solid blocks, exc. 10 cm in width and setting in cement mortar 1:6 , complete all as specified and directed .
Material and labour for rendering 10 mm thick in cement mortar 1:6 on fair faces of brick work or concrete surfaces finish even & smooth without using extra cement, complete all as specified and directed .
Material and labour for rendering 15 (10+5) mm thick in two layers (1st layer 10mm in CM 1:6 and 2nd layer(5mm) in CM 1:4 )using water proofing compund on fair faces of brick work or concrete surfaces finish even & smooth without using extra cement, complete all as specified and directed.
Material and labour for preparation of newly plastered surfaces and applying alkali resistent paint on plastered surfaces preparatory to distempering and distempering walls with two coats of OBD, white or tinted, complete all as specified and directed .
Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces, complete all as specified and directed.
Material & Labour Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, complete all as specified and directed.
Material & Labour Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, complete all as specified and directed.
Material & Labour 75mm thick PCC 1:4:8 type D2 using 40mm graded stone aggregate over rammed earth & finished even and smooth using extra cement complete all as specified and directed.
Material & Labour Non - skid coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.
Material & Labour Glazed coloured ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match complete all as specified and directed.
Material and labour Screed bed or bedding layer of mortar 15 mm thick in CM 1:6 for laying floor finishes, complete all as specified and directed .
Material and labour Rendering 10mm thick in CM 1:4 on fair faces of brick work or concrete surfaces as back coat, complete all as specified and directed.
Supply and Fix Anodised aluminium snap grid frame work for false ceiling with Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and directed.
Supply and Fix Non asbestos fibre cement building boards (595x595x8mm) fixed in ceiling flat or sloping or laid/ inserted to timber/GI/Aluminium framework with screws complete all as specified and directed.
Supply and Fix Non asbestos fibre cement building boards (595x595x8mm) fixed in ceiling flat or sloping or laid/ inserted to timber/GI/Aluminium framework with screws complete all as specified and directed.
Supply and Fixing powder coated 50 micron Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed .
Supply and Fixing powder coated 50 micron Anodised aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified and directed .
Supply and Fixing powder coated 50 micron Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and directed .
Supply and Fixing 4mm thick Sheet glass, ordinary quality and glazing with oil putty in square exc 0.5 sq. m in each pane , complete all as specified and directed.
Supply and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminte shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame., complete all as specified by the manufacturer and all as specified and directed.
Supply and fixing 30 mm thick Fiberglass Reinforced Plastic (F.R.P.) flush door shutter in different plain and wood finish made with fire retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate all around, with suitable wooden blocks inside at required places for fixing of fittings and polyurethane foam (PUF)/Polystyrene foam to be used as filler material throughout the hollow panel, casted monolithically with testing parameters of F.R.P. laminate conforming to table 3 of IS: 14856 complete all as specified by the manufacturer and all as specified and directed.
Supply and Fixing 300mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, complete all as specified and directed.
Supply and Fixing 200mm Aluminium anodised, barrel tower bolts of extruded section and fixed, complete all as specified and directed.
Supply and Fixing 100mm Aluminium anodised, barrel tower bolts of extruded section and fixed, complete all as specified and directed .
Supply and Fixing 100mm Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21, complete all as specified and directed.
Supply and Fixing Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified, complete all as specified and directed.
Supply and Fixing Pre- painted galvatume aluminum zinc coating GI based plain steel sheet for Ridge 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified, complete all as specified and directed.
Supply and Fixing Roof trusses Fe 410 -W (Gde- E- 250) quality- A (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc, complete all as specified and directed.
Material and Labour Treating the backfill ( ATT) in contact with foundation at the rate of 7.5 litres of emulsion per square metre of vertical surface (Area of the sub structure in contact with backfill to be measured), complete all as specified and directed.
Material and labour Treating (ATT) the top surface of filled earth at the rate of 5 litres of emulsion per square metre of surface, complete all as specified and directed.
Material and labour Treating (ATT) the soil under plinth protection at the rate of 5 litres of emulsion per square metre of surface area, complete all as specified and directed.
Material and labour Treating(ATT) the soil along with external perimeter of building at the rate of 2.25 litre of emulsion per metre of the perimeter wall, complete all as specified and directed .
Material and labour broken stone Hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface, complete all as specified and directed.
Material and labour 75mm thick Cement concrete type B- 2, 1:2:4 using 40mm graded store aggregate as in plinth protection, complete all as specified and directed.
Material and labour RCC M-30 (20mm graded aggregate) in Chajjas, complete all as specified. Note : Reforcement & Formwork will be measured & paid seprately under relevant items of schedule.
Use & Waste of Formwork to chullah hoods, chajjas, troughs and similar items including edges, complete all as specified and directed.
Material and labour Prepration of new or previously untreated steel surfaces & apply two coat of synthetic enamel paint over a coat of Red oxide primer of any description , over 10 Cm in width or grith, not other wise described , complete all as specified and directed .
Supply and Fix Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) fixed & Plastic water closet seat, black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device, complete all as specified and directed.
Supply and Fix 10 litres Capacity PVC valveless,syphonic action type,flushing cistern,low level,white with inlet,ball valve,float and handle including brackets & Flush pipe of polyethylene of low or high density or PVC. 32 mm dia, for low level cistern & fixing High or low level flushing cistern (exclusive of brackets), and connections to pipes and fixing of chain and pull, or lever, if any , complete all as specified and directed.
Supply and Fix Wash basins, Vitreous China (flat back or angle back type) 550mmx400mm size, including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipefixed & 32mm dia Bottle trap of PTMT having minimum water seal of 25mm .(Minimum weight 32mm-260gms/ 40mm-270 gms), complete all as specified and directed.
Supply and Fix 75 mm Dia PVC (SWR) pipes single socketed in any length with rubber ring jointslaid in trenches or in floors, complete all as specified and directed.
Supply and Fix 110 mm dia PVC (SWR) pipes single socketed in any length with rubber ring jointslaid in trenches or in floors, complete all as specified and directed.
Supply and Fix 75 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls, complete all as specified and directed.
Supply and Fix 110 mm dia PVC (SWR) pipe with single socketed in any length solvent cement jointed fixed to wall/column, complete all as specified and directed.
Supply and Fix 75 mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement, complete all as specified and directed.
Supply and Fix PVC (SWR) bends any radius 110 mm bore with acess door, complete all as specified and directed .
Supply and Fix PVC (SWR) bends any radius 75 mm bore with acess door, complete all as specified and directed.
Supply and Fix 110mm bore PVC (SWR) junction single, (Single T) equal or unequal with acess door, complete all as specified and directed.
Supply and Fix 75mm bore PVC (SWR) junction single, (Single T) equal or unequal with acess door, complete all as specified and directed.
Supply and Fix PVC (SWR) vent cowl 75mm dia, complete all as specified and directed.
Supply and Fix PVC (SWR) vent cowl 110mm dia, complete all as specified and directed.
Excavating in post holes (or similer holes) nexc 0.5 cum, getting out in Soft disendigrated Rock returning filling in ramming earth or broken rubble with with earth around in layers nexc 25 cm and removing surplus material nexc 50m and making good surface , complete all as specified and directed.
Surface excavation n. exc 30 cm deep and averaging 15 cm deep and getting out in soft / disintegrated rock complete all as specified and directed.
Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point, complete all as specified and directed.
Material and labour providing cement concrete type B2, 1:2:4 (40mm graded aggregate) in in walls or retaining walls, any thickness, size or shape including pilasters, buttresses columns, pillars, boundary pillars and posts (including caps and bases), complete all as specified and directed .
Material and labour 100mm thick Cement concrete type B-1, 1:2:4 (20mm graded aggregate) finished even & smooth without using extra cement, complete all as specified and directed.
Material and labour Aluminium dividing strips, 1.5mm thick,38mm width inserted in position, conform to design, complete all as specified and directed .
Supply and Fix MS Tubes as in posts and struts of Fe-290 Gde E-165 incl cutting as directed and drilling holes etc complete (Medium) , complete all as specified and directed.
Supply and Fix Steel Guesst plates Fe-290 Gde E-165 ( Plain or chequered) forming holes, fixed independently complete all as specified .
Material and labour PCC (1:4:8) type D2 as in sub base 75 mm thick using 20mm graded stone aggregate finished even & smooth without using extra cement, complete all as specified and directed.
Material and labour Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thick M-40 Grade laid over sand cushioning layer , complete all as specified and directed. NOTE :- Sand Cushioning will be measured and paid seperately under relevant items of this schedule.
Supply only Fine aggregate (sand) for cushioning , complete all as specified and directed.
Material and labour Walling of Laterite stone masonry,regular coursed,well bonded,bedded and solidly hearted,built in CM 1:6 mix , complete all as specified and directed.
Material and labour cement concrete type C2 1:3:6 using 40mm graded stone aggregate as in surface channels and drains, complete all as specified and directed.
Material and labour cement concrete 1:2:4 Type B-1 using 20mm graded stone aggregate as in coping including necessary formwork complete all as specified and directed.
Providing, precast cement concrete 1:2:4 type B1 in Cover slabs etc.(of any section indicated), with plain fair faces, including chamfers weatherings, throating etc. and setting in cement mortar 1:6 complete with joints to match. , complete all as specified and directed.
Material and labour concrete 1:3:6 Type C-2 using 40mm graded stone aggregate as in bed to drain pipes including packing under, and hunching against the sides of pipes after they are laid and tested for 150mm bore pipe complete all as specified and directed.
Material and labour Reinforced concrete pipes 150 mm dia , class NP2, laid and jointed complete with collars complete all as specified and directed.
Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, mounds, mitred/stopped end etc all as specified and as directed
Material and labour rugs for man holes ,Hand rails, half round or other stock section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embedding in concrete , etc., and similar work conforming to Fe 410-0 or Fe 310-0 all as specified and as directed all as specified and as directed
Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4section) in cement concrete 1:2:4 typeB-l smooth finished, and reforming benching as required .
Material and labour Walling of random rubble, uncoursed,well bonded,laid in retainig walls, abutments and similar work in CM 1:6 complete all as specified and directed.
Keyed pointing to random rubble masonry in CM 1:4 Mix complete all as specified and as directed.
Material and labour Applying two coats of cement base paint over a coat of alkali resistant primer including praparation of surface, complete all as specified and directed.
Material and labour Boulder filling dry, handpicked tightly , as in wire crate apron bunds ( wire crate measured separately) complete all as specified and directed.
Supply and fix 50mm dia PVC pipe rating of 6kg/cm2 for weep holes as specified and as directed.
Internal Electrification :- Material and labour concealed point wiring with 1.5sq mm PVC insulated unsheathed multistranded single core copper conductor FRLS, ISI marked cable through rigid, non metallic, ISI marked PVC conduit with and including all accessories, suitable white cover plate with frame & modular metal flush box and 1.5 sqmm PVC insulated unsheathed multistranded sigle core copper conductor FRLS, ISI marked cable as earth continuity conductor, including cutting chasis, and making good dusturbed surfaces etc complete all as specified & directed for the following :- (NOTE : (i) Rate quoted shall be included for providing modular boxes, modular plate etc suitable way for fixing socket & switches (ii) switch and socket to be measured and paid for separately) :-
All as per item No 90 here in before for One light point controlled by one 5/6 Amp, one way switch.
All as per item No 90 here in before for One socket outlet, three/five pin,5/6 Amp, on independent board controlled by one 5/6 amps one way switch or switch/socket combination 5 amps, 5 pin.
All as per item No 90 here in before for one ceiling/exhaust fan point controlled by one switch.
All as per item No 90 here in before for one 3 pin socket outlet 5 amps controlled by one switch in same board.
All as per item No 90 here in before for 2.5 sqmm One socket outlet, three/five pin,15/16 Amp, on independent board controlled by one 15/16 amps one way switch or switch/socket.
Supply and Fix Switch modular 5/6A, 1 module, AC, 230V, One way ISI marked . Make Legrand/Havells/ L& / standard.complete all as specified and as directed.
Supply and Fix Switch modular 15/16A, 1 module, AC, 230V, One way ISI marked .complete all as specified and as directed.
Supply and fixing modular socket outlet,AC,230V three/five pin, 5/6 amp controlled by one 5/6 amps one way switch.complete all as specified and as directed.
Supply and fixing modular socket outlet,AC,230V three/five pin, 15/16 amp controlled by one 15/16 amps one way switch.complete all as specified and as directed.
Supply and fixing ceiling rose, three terminals,, 230 (ISI marked) surface bakelite suitable for battern fitting complete all as specified.
Supply and fix LED light fitting 1 x 20 W , 220 V AC decorative box type with driver, holder including LED tube light connecting up the three core flexiable copper conductor cable of suitable size from ceilling rose complete all as specified and as directed.
Supply and fix LED light fitting 1 x 9W/ 1 x 10W ,220 V AC Bulk head luminaries including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size as specified directed.
Supply and fix DB 8 way , double door, IP 43 portection, shrouded neutral bar , earth termination complete all as specified and directed . Make Indo Asian cat No KSLTV004 or equivelant in Havells/standred/Legrand.(Out going MCB shall be measured and paid seperately under relevant item)
Supply and Fix Switch modular 32A, DP-1 Way with indicator , 2 module complete with modular box and front cover complete all specified as directed. Make Legrand cat No 5734 12 or equivalent.
Supply and Fix MCB SP 5 to 32 amps rating 240 V , 10 KA 'C' curve MCB SPN and current carrying capacity in the MCB DB complete with connection testing and commissioning as complete all as specified and as directed.
Supply and fixing RCBO double pole (DP) 32 A , 100 mA, 230 V , 10kA , ISI Marked for Earth leakage fault complete all as specified and as directed.
Supply and Fix ceiling fan complete with blades , down rod, electronic regulator and accessories, 230 V, 1200 MM Sweep, min air delivery 210 CFM with service value 6.00 BEE, five star rated with BLDC complete all as specified and as directed.
Supply and Fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230 V, 50Hz RPM 1200, copper winding of sweep 250 mm.complete all as specified and as directed.
Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet , 10 W 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete as directed.
Material and labour for Earthing complete with galvanised earth plate electrode 600x600x6 mm thick buried directly in ground vertically (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of plate not less than 1.5 mtr below normal ground level connected to and including GI wire 4 mm dia size protected with G I medium grade pipe 40mm dia for earth electrode up to test point or up to 7.5 mtr whichever is less by means of nuts, bolts, check nuts and washers of copper/brass including earth work, excavation, PCC pit and RCC cover ( 1:2:4 type B1) and funnel, with necessary charcoal, salt etc;complete all as per electrical plate No.5 of SSR Part - I including testing for required value complete all as specified and directed.
INTERNAL WATER SUPPLY :-Supply and Fix CPVC pipe SDR 11 having outer dia 20 mm plain CPVC SDR 11 fitting , such as bends, elbow , union and end piece to receive the fitting and fixed with solvent cement in wall/ceiling(concealed/surface) or laying in floor complete all as specified and directed.
Supply and Fix CPVC pipe SDR 11 having outer dia 16 mm plain CPVC SDR 11 fitting , such as bends, elbow , union and end piece to receive the fitting and fixed with solvent cement in wall/ceiling(concealed/surface) or laying in floor complete all as specified and directed.
Supply and fixing Low density polythene pipe 15 mm dia (outer), metallic baided, 450 mm long suitable for cold/hot water application complete with brass union on both sides
Supply and fix 15mm dia Pillar taps, cast alloy with capstan head chromium plated, screwed down high pressure with or without lettered ' Hot and Cold" with long screwed shanks and fly nut all as specified and directed.
Supply and fix 15mm Bib taps, cast copper alloy long body screwed for CPVC Pipe all as specified and directed.
Supply and Fix Health faucet with 1.00 mtr flexiable tube in chrome finish 16 mm outer dia low density polythene, with wall hook, suitable for cold water application complete with union and teflone washers and holder to suit 15 mm angle cock all as specified and directed.
Supply and Fix angular stop cock , chromium plated , cast copper alloy , screwed down for CPVC pipe 15/16mm dia bore all as specified and directed.
EXTERNAL ELECTRIFICATION :-Supply and Lay XLPE,test and commissioning insulated, electric power cable LT 1100 Volts grade, armourd heavy duty with stranded aluminum conductor of size 16 sqmm 2 core.
Supply and Laying GI tube light grade with all fitting, laid in trenches or on wall of size 25 mm bore.complete all as specified and as directed.
Excavation in trenches not exceeding 1.5mtr wide and n.exc 1.5 mtr depth and getting out in hard/dense soil.complete all as specified and as directed.
Returing, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm.
Removing excavated material n.exc 50m and depositing where directed at a level n.exc 1.5 above the starting point. complete all as specified and as directed.
Material and labour sand filling in trenches including watering and consolidation for cable protection and 18 cm completed all as specified and directed. Note:- punned thickness only will be measured and paid to the contractor.
Material and labour un-reinfored precast concrete cable cover, class LV type1 size 250x150x40mm all as specified and directed
Modification of existing LT panel by supply and fixing of MCB 32A, SPN, 10kA , 230 V with angle iron and providing of suitable size of box for fixing of MCB and foundation etc complete (Existing LT Panel Near B&R No 2 Sub division)
Supply and fixing building security light for use of front and rear side 45 W made up of pressure die cast housing with thoughned glass and high power LEDs with frame inclduing all accessories and suitable bracket made out of GI Pipe medium grade of dia 40mm and length 2 m bend in shape incl 1.5 sqmm copper conductor flexible cable 1100 V. Make CG Model No lsts-45-CDL-M or equivalent in other make.
EXTERNAL WATER SUPPLY :- Excavation in trenches in hard / dense soil n.exc 1.5 m wide and n. exc 1.5 m depth and getting out, including trimming the sides and forming bottom surface to required levels for laying pipes complete all as specified and as directed.
Returning, filling in trenches in soft/loose soil in layers n.exc. 25 cm after laying of pipes including spreading, levelling, and well ramming complete all as specified and as directed.
Removing surplus excavated material (soil) to a distance not exceeding 50 metre and depositing where directed at a level not exceeding 1.5 metre above the starting point complete all as specified and as directed
Supply and lay 25mm dia pipe galvanized, “Medium class”, including fittings as specified and as directed
Supply and Fix 25mm bore Gun-metal, globe or gate valves,with iron wheelhead,screwed both ends for iron pipe and fixed complete all as specified and as directed.
Supply and Fix Ball valves 25 mm and minimum weight of 455 gms high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe and fixed complete all as specified and as directed.
Cutting existing CI/GI tubing of any dia for alterations or additions Tee, for Tapping including necessary excavation and making good the surface all as specified.(Each cut measured)
Gates Infra Construction Co
K P DIVAKARAN
KDR CONSTRUCTION
GMS Builders
M/S V ASSOCIATES
stage.html
html • 0.06 MB
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .