Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹20.1 LAccepted-AOC | ₹20.1 L Quoted ₹21.3 L | L1 | Accepted-AOC Lowest bidder |
| 2 | L2₹22.5 L+₹1.2 L (5.67%)Rejected-Finance | ₹22.5 L+₹1.2 L (5.67%) | L2 | Rejected-Finance Other than lowest |
| 3 | L3₹26.6 L+₹5.3 L (24.9%)Rejected-Finance | ₹26.6 L+₹5.3 L (24.9%) | L3 | Rejected-Finance Other than lowest |
| Sl No | Description | Qty | Unit | M/S SAI CONSTRUCTION L1 | M/S MALHI CONSTRUCTIONS L2 | Akarsha Enterprises L3 |
|---|---|---|---|---|---|---|
| 1.00 | M&L for cleaning of Moving Bed Bio Reactor (MBBR) tank of storage capacity up to 200 KLD and with complete inlet and outlet MS pipe line connection for tank through proper opening of nut bolt and washers inlet, outlet and drain out MS pipe line all drain throughout by removing mud grits for the tank and washing and cleaning choked mud particals inside the MS pipe line and Tank with cleaning of MBBR media, tube duct media inside the tank by using of sodium hydroxide with brush and water pressure etc from tank complete all as required at site and and reassemble complete inlet outlet and drain out connection with nut, bolt and washer and proper connection complete testing of the plant all as specified and directed by Engineer-in-Charge by following method :- (a) Cleaning inner surface of tank complete by scraping with steel wire brush and removing mud and sludge collected inside the tank manually at a distance not excedding 50 mtr all as directed by engr in charge (b) Washing with clean water and bleaching powder mixturre throughly complete tank internally and removel of left sludge if any at site at a distance not exceeding 50 mtr as directed by Engr in Charge Note:- Requirment for new MBBR media and Tube duct media in replacement of broken/ reduce qty in tank will be measured and paid separately. | 8 | Each Job | 25,000 ₹2,00,000 | 15,000 ₹1,20,000 | 3,000 ₹24,000 Lowest |
| 2.00 | M & L for cleaning of Tube setler Tank -01 Nos,for STP plant (capacity 200 KLD with complete inlet and outlet MS pipe line connection for tank through proper openeing of nut bolt and washers inlet, outlet and drain out MS pipe line for the tank and washing and cleaning choked mug perticals inside the MS pipe line and Tank with cleaning of MBBR media, tube duct media inside the tank by using of sodium hydroxide with brush and water pressure and reassemble complete inlet outlet and drain out connection with nut, bolt and washer and refilling of Cleaned MBBR media and Tube duct media inside the tank and proper connection complete testing of the plant all as specified and directed by Engineer-in-Charge. | 4 | Each Job | 12,000 ₹48,000 | 10,000 ₹40,000 | 5,000 ₹20,000 Lowest |
| 3.00 | M & L for cleaning of Filter Feed Tank -01 Nos for STP plant capacity 200 KLD with complete inlet and outlet MS pipe line connection for tank through proper openeing of nut bolt and washers inlet, outlet and drain out MS pipe line for the tank and washing and cleaning choked mud perticals inside the MS pipe line and Tank with cleaning of MBBR media, tube duct media inside the tank by using of sodium hydroxide with brush and water pressure and reassemble complete inlet outlet and drain out connection with nut, bolt and washer and refilling of Cleaned MBBR media and Tube duct media inside the tank and proper connection complete testing of the plant all as specified and directed by Engineer-in-Charge. | 4 | Each Job | 10,000 ₹40,000 | 10,000 ₹40,000 | 5,000 ₹20,000 Lowest |
| 4.00 | M & L for cleaning of collection cum equalization tank /treated water Tanks -01 No for each STP plant (capacity 200 KLD MAP) with complete inlet and outlet MS pipe line connection for tank through proper openeing of nut bolt and washers inlet, outlet and drain out MS pipe line for the tank and washing and cleaning choked mug perticals inside the MS pipe line and Tank with cleaning of MBBR media, tube duct media inside the tank by using of sodium hydroxide with brush and water pressure and reassemble complete inlet outlet and drain out connection with nut, bolt and washer and refilling of Cleaned MBBR media and Tube duct media inside the tank and proper connection complete testing of the plant all as specified and directed by Engineer-in-Charge | 4 | Each Job | 10,000 ₹40,000 | 8,500 ₹34,000 | 5,000 ₹20,000 Lowest |
| 5.00 | M&L for cleaning of sludge Drying Beds by removing mud, grits etc from beds complete all as required at site and dirtected by the Engineer in charge by the follwing method :- (a) Cleaning inner suface of bed complete by removing mud and sludge collected inside the bed manuallly at a distance not exceeding 50 mtr all as directed by Engr in charge. (b) Washing with clean water and bleaching powder mixture throughly complete bed internally and removel of left out sludge if any at site at a distance not exceeding 50 mtr all as Engr in charge | 4 | Each Job | 10,000 ₹40,000 | 7,500 ₹30,000 | 5,000 ₹20,000 Lowest |
| 6.00 | All as per the description of serial item above 5 here in before but cleaning of treated water tank with chemical contact tank of size up to capacity 200 KLD complete all as specified and directed | 4 | Each Job | 10,000 ₹40,000 | 6,500 ₹26,000 | 5,000 ₹20,000 Lowest |
| 7.00 | M&L for cleaning of bar screen chamber and remove all all objects such as rags and plastic from watse water complete all as specified and directed | 4 | Each Job | 5,000 ₹20,000 | 4,000 ₹16,000 Lowest | 4,500 ₹18,000 |
| 8.00 | Material and Labour for comprehensive maintenance of the pumps sets and motors of Air blower Motor-02 Nos, Booster Pump -02 Nos Chemeical dosing pump-02 Nos of capacity 2 to 7.5 HP consisting of comprehensive repairs/maintaining/over hauling with routine maintenance and testing of sewage pump sets in wet type installation, lifting pump set from position, inspection/diagnosing the defects, repairs/replacement of motor starter, motor rewinding, etc and all connected repairs and accessories complete all as specified by Engr-in-charge. | 15 | Each Job | 10,000 ₹1,50,000 | 2,000 ₹30,000 Lowest | 8,000 ₹1,20,000 |
| 9.00 | Cutting of existing 100 mm bore GI/CI pipe in position to required length for repairs of blockage or insert new GI/MS fitting such as collers, branches,tee etc or pipe complete all as specified and directed. Note:- Excavation and earth work,fittings,pipe etc shall be measured and paid saperately. | 5 | Each Job | 500 ₹2,500 Lowest | 1,000 ₹5,000 | 3,000 ₹15,000 |
| 10.00 | Cutting of existing 50 to 80 mm bore GI/CI pipe in position to required length for repairs of blockage or insert new GI/MS fitting such as collers, branches,tee etc or pipe complete all as specified and directed. Note:- Excavation and earth work,fittings,pipe etc shall be measured and paid saperately. | 5 | Each Job | 500 ₹2,500 Lowest | 500 ₹2,500 Lowest | 2,500 ₹12,500 |
Tender Value
Refer Docs
EMD Value
₹70,000
Closing Date
11 Jul 2025, 6:00 pmClosed
Major S N Gaikwad
Holta Cantt Palampur
REPAIR REPLACEMENT AND MAINTENANCE CLEANING OF STP PLANT ALONGWITH CONNECTED ITEMS AND MAINT REPLACEMENT OF GI DISTRIBUTION PIPE LINE FEEDING VARIOUS LOC AT PALAMPUR AND ALHILAL MIL STN
2025_MES_714152_1
GEP-44/2025-26
Open Tender
Civil Works
Item Rate
180 days
Palampur and Alhilal Mil Stn
As per tender documents
8 documents required · 8 mandatory
₹500
GE Palampur
₹70,000
1 Sept 2025
13 Jun 2025
17 Jul 2025
13 Jun 2025
11 Jul 2025
27 Jun 2025
Amount
M&L for cleaning of Moving Bed Bio Reactor (MBBR) tank of storage capacity up to 200 KLD and with complete inlet and outlet MS pipe line connection for tank through proper opening of nut bolt and washers inlet, outlet and drain out MS pipe line all drain throughout by removing mud grits for the tank and washing and cleaning choked mud particals inside the MS pipe line and Tank with cleaning of MBBR media, tube duct media inside the tank by using of sodium hydroxide with brush and water pressure etc from tank complete all as required at site and and reassemble complete inlet outlet and drain out connection with nut, bolt and washer and proper connection complete testing of the plant all as specified and directed by Engineer-in-Charge by following method :- (a) Cleaning inner surface of tank complete by scraping with steel wire brush and removing mud and sludge collected inside the tank manually at a distance not excedding 50 mtr all as directed by engr in charge (b) Washing with clean water and bleaching powder mixturre throughly complete tank internally and removel of left sludge if any at site at a distance not exceeding 50 mtr as directed by Engr in Charge Note:- Requirment for new MBBR media and Tube duct media in replacement of broken/ reduce qty in tank will be measured and paid separately.
M & L for cleaning of Tube setler Tank -01 Nos,for STP plant (capacity 200 KLD with complete inlet and outlet MS pipe line connection for tank through proper openeing of nut bolt and washers inlet, outlet and drain out MS pipe line for the tank and washing and cleaning choked mug perticals inside the MS pipe line and Tank with cleaning of MBBR media, tube duct media inside the tank by using of sodium hydroxide with brush and water pressure and reassemble complete inlet outlet and drain out connection with nut, bolt and washer and refilling of Cleaned MBBR media and Tube duct media inside the tank and proper connection complete testing of the plant all as specified and directed by Engineer-in-Charge.
M & L for cleaning of Filter Feed Tank -01 Nos for STP plant capacity 200 KLD with complete inlet and outlet MS pipe line connection for tank through proper openeing of nut bolt and washers inlet, outlet and drain out MS pipe line for the tank and washing and cleaning choked mud perticals inside the MS pipe line and Tank with cleaning of MBBR media, tube duct media inside the tank by using of sodium hydroxide with brush and water pressure and reassemble complete inlet outlet and drain out connection with nut, bolt and washer and refilling of Cleaned MBBR media and Tube duct media inside the tank and proper connection complete testing of the plant all as specified and directed by Engineer-in-Charge.
M & L for cleaning of collection cum equalization tank /treated water Tanks -01 No for each STP plant (capacity 200 KLD MAP) with complete inlet and outlet MS pipe line connection for tank through proper openeing of nut bolt and washers inlet, outlet and drain out MS pipe line for the tank and washing and cleaning choked mug perticals inside the MS pipe line and Tank with cleaning of MBBR media, tube duct media inside the tank by using of sodium hydroxide with brush and water pressure and reassemble complete inlet outlet and drain out connection with nut, bolt and washer and refilling of Cleaned MBBR media and Tube duct media inside the tank and proper connection complete testing of the plant all as specified and directed by Engineer-in-Charge
M&L for cleaning of sludge Drying Beds by removing mud, grits etc from beds complete all as required at site and dirtected by the Engineer in charge by the follwing method :- (a) Cleaning inner suface of bed complete by removing mud and sludge collected inside the bed manuallly at a distance not exceeding 50 mtr all as directed by Engr in charge. (b) Washing with clean water and bleaching powder mixture throughly complete bed internally and removel of left out sludge if any at site at a distance not exceeding 50 mtr all as Engr in charge
All as per the description of serial item above 5 here in before but cleaning of treated water tank with chemical contact tank of size up to capacity 200 KLD complete all as specified and directed
M&L for cleaning of bar screen chamber and remove all all objects such as rags and plastic from watse water complete all as specified and directed
Material and Labour for comprehensive maintenance of the pumps sets and motors of Air blower Motor-02 Nos, Booster Pump -02 Nos Chemeical dosing pump-02 Nos of capacity 2 to 7.5 HP consisting of comprehensive repairs/maintaining/over hauling with routine maintenance and testing of sewage pump sets in wet type installation, lifting pump set from position, inspection/diagnosing the defects, repairs/replacement of motor starter, motor rewinding, etc and all connected repairs and accessories complete all as specified by Engr-in-charge.
Cutting of existing 100 mm bore GI/CI pipe in position to required length for repairs of blockage or insert new GI/MS fitting such as collers, branches,tee etc or pipe complete all as specified and directed. Note:- Excavation and earth work,fittings,pipe etc shall be measured and paid saperately.
Cutting of existing 50 to 80 mm bore GI/CI pipe in position to required length for repairs of blockage or insert new GI/MS fitting such as collers, branches,tee etc or pipe complete all as specified and directed. Note:- Excavation and earth work,fittings,pipe etc shall be measured and paid saperately.
Supply and laying of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches complete all as specified. of size 32 mm with all fittings , laid in ground / on wall /pillars complete all as specified and directed.
Supply and laying of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches complete all as specified. of size 40 mm with all fittings , laid in ground / on wall /pillars complete all as specified and directed.
Supply and laying of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches complete all as specified. of size 50 mm with all fittings , laid in ground / on wall /pillars complete all as specified and directed.
Supply and fix automatic Star delta starter for 30 HP motor with overload relay of range 10-16 Amps , power contractors ML-1 and suitable capacity timer range , single phase preventer including taking down old un-serviceable star delta starter complete all as specified and directed.
Supply and fix automatic Star delta starter for 12.5 HP motor with overload relay of range 10-16 Amps , power contractors ML-1 and suitable capacity timer range , single phase preventer including taking down old un-serviceable star delta starter complete all as specified and directed
Supply and fix in replacement of V Belt F-56 all as per existing as specified and directed
Supply and pouring compressore oil in air blower including taking down old oil complete all as directed by engineer in charge
Supply and fixing in replacement of diffuser suitable for 200KLD STP as per site requirement complete all as directed by engineer in charge
Excavation in trenches not exceeding 1.5 metre wide and not exceeding 1.5 metre in depth for foundation, shafts, man holes,for under ground cable / erection of poles, stays etc not exceeding 10 Square metre on plan and getting out in any type of soil including dressing/trimming of sides and leveling, grading and ramming of bottom of excavation complete all as specified and as directed
Returning, filling in, including, spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick in any type of soil complete all as specified & directed.
Removing excavated soil to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified & directed.
M&L for sand cushioning to under ground cables 8 cm thick before laying the cable and 15 cm, thick after laying, stretching and testing the cable complete all as specified and directed by Engr-in-Charge.
M&L for laying in trenches burnt brick sub class 'B' for cable protection laid adjacent to each other length wise perpendicular to the central axis of cable complete all as specified.
Taking up or down old unsv GI tubing 20 to 100 mm bore and connections (including fittings) from trenches/walls /floors complete all as specified and directed.
Supplying, laying, jointing and testing 100 mm bore galvanised steel water tubing medium grade (ISI rked) laid in trenches with medium grade galvanised iron fitting (ISI marked) such as bends, tees, sockets, nipples & unions, flanges etc complete all as specified and directed.
All as per item 25 above here-in before but for of size 80 mm compete all as specified and directed.
All as per item 25 above here-in before but for of size 50 mm compete all as specified and directed.
All as per item 25 above here-in before but for of size 40 mm compete all as specified and directed.
All as per item 25 above here-in before but for of size 25 mm compete all as specified and directed.
All as per item 25 above here-in before but for of size 20 mm compete all as specified and directed.
Supply only sodium hypochloride in granual form on 45 kg drum having minimum 65-70% of available chlorine with anti-corrosive and anti scaling properties suitable for human consumption chemical manufacturer complete all as specified and directed.
M&L repairing to monoblock pump set of capacity 5 HP incl taking out from foundation bed, removing electric connection etc and transport to wksp for re-winding of motor with super enameled insulated copper winding wire as per existing gauge and replacement of thrust bearing, MS bush, nut & bolts as required for pump set including oiling, greasing and gland packing and re-installing pump & motor set and testing at site, complete all as specified and directed.
S & F in replacement bearing of best quality suitable for 3 to 5HP motor and pump as per site including taking out old un-serviceable one complete all as specified and directed
M & L for preparation of old painted Outer surfaces of the MBBR Tank -02 Nos, Tube setler Tank -01 No, Filter Feed tank- 01 No, Dual media filter Tank -01 , Activated media filter - 01 No and complet MS pipe line inlet and outlet connection for STP plant for cleaning rusted, oilly and greasy spots using CRC & brush, material and labour for one coat primer and two coat of synthetic enamel paint using spray machine color of paint and two coat of white wash for Outer surface of RCC main sewage storage tank-01 no and Treated water tank-01 No with proper cleaninng of wall surface before piniting of white wash complete all as specified and directed by Engineer-in-charge.
Supply and filling of PVC Tube deck media for inside of Tube setler Tank STP Plant (capacity 200 KLd ) as per specific make suitable for STP Plant complete all as specified and directed by Engineer-in-Charge
Supply and fixing in replacement of pressure gauge for pressure suction pump 0-25 PSI including complete connection with testing all as specified and direccted by Engineer-in-Charge.
Supply and fixing of cast iron Butter fly valve 80mm dia suitable for fixing of MS piple line connection with both end flagnge complete all as specified and directed by Engineer
Supply and fixing of cast iron Butter fly valve 50 mm dia suitable for fixing of MS piple line connection with both end flagnge complete all as specified and directed by Engineer.
Supply and fixing of cast iron Butter fly valve 40 mm dia suitable for fixing of MS piple line connection with both end flagnge complete all as specified and directed by Engineer.
Supply and fixing of cast iron Butter fly valve 25 mm dia suitable for fixing of MS piple line connection with both end flagnge complete all as specified and directed by Engineer.
Supply and mixing of DI amonium phospate fertilizer for developed bacteria in equilisation tank MBBR 1 and MBBR2 tanks of STP chamber complete all as specified and directed by Engr in Charge
Carrying sample for testing of treated water of STP and submission of detailed test report to the office of the Engr in charge and testing in NABL approved laboratory as approved by GE (a) carrying out miniumum essential testing of water as per IS 10500-1991 mandatory for chemical odour PH values TSS , BOD, COD residual chlorine total nitrogen , sulphate oil and grease ammonical nitrogen (NH2N) and Bacteriological total collifrom organisms per 100 MI (MPN) and E colilie in 100 ml. Note rate quoted shall deemed to be included for (i) cost of sterlised bottle as required (ii) To and transportation charges for collection of sample iii) Testing to be done as and when directed by Engr in charge
M&L for dismantling disconnecting the Air blower twin lobe postive displacement type of pressure up to 0.8 Kg/cm2 and capacity up to 800 cum/hr including diconnecting from chanel frame and electical panel for repair of gear box, replacement of ball bearing , roller bearing ,piston ring,oil seal, suction air filter , pressure ring etc and refitting of gear box after oiling greasing, alingment of pump set and refixing assembling testing to make it functional complete including cleaning of all dirt, dust etc all as specified and directed by Engr in Charge.
M& L for cleaning of Pressure sand filter and removing filter media claening , drying and refixing as before with top up of filter media if required all specified and direced
M& L for cleaning of DMF and removing filter media claening , dryiing and refixing as before with top up of filter media if required all specified and direced
M& L for claeaning of Activated carbon filter and removing filter media claening , dryiing and refixing as before with top up of filter media if required all specified and direced
M&L for cleaning and desilting the sewage well of capacity dewatering the complete well removing all the deposited sludge soil and other material from the well including baling /pumping out muddy water from the well by manually or by providing suitable pump sets from bottom level of well scraping out the scales deposite from inner surface of the well scraping out thr scale deposits from inner surface of the well throughly washing with bleaching powder and soda ash cleaning bailing out settled materials completly by and means and removing sludge to a distance up to 3km out side of defence land limit and dispose off in low laying area including deawatering as required Note :- (1) Contractor is to arrange own diesel pump T&P etc for cleaning purpose and minor spares and consumable like small screws washers cleaning agents consuambles etc is deemed to be include all safety precaution to be taken while working in lift well (ii) The accumulated deposited sludge after drying shall be dispossed off out side the defence land to a distance exceeding 1.5 KM and not exceeding 5 KM form the lift well cost of which shall be deemed to inclusive in the quoted rate and nothing extra shall be paid onn this account (iii) Before commencement of work necessary arrngement for disposal of sewage sludge be made and work to be carried out in ffast pace be depoloying more man power at lift well in order to complete the work at the earliest
M&L for replacement of UNSV MBBR media from the tank and supply of filling fresh media of MBBR media in the main reactor as specified of existing /suitable make with the following specification effective surface area of media approx 400 sqm /cum (b) media ht approx 15/10mm (c ) media dia approx 22mm (d) Weight per unit surface area approx 22 mm (e) voidage - 093gm/cum (d) Media fill range 25-55% of volume
Supply and mixing of dewatering poly electrolilte 100 % purity complete all as specified and directed or as approved by GE
supply and mixing calcium hydro oxide (Lime 80 =85% in powder form as pH booster for STP water packing in 40 Kg Packs complete all as specified and directed
Supply and mixing bacteria culture airobic in 30 Kg of srum complete all as specified and directed
Supply and mixing DAP fertiliser for day to day use in sewage treatment plant complete all as specified and directed
Supply and mixing PAC (Poly aluminium chloride Ac 1005 in organic soluable polymer powder packed in 25 kg poly bags completed all as specified and directed
Supply and fixing unbranded churshed mineral redymade bituminous pothhole patching mix all as specified and diredcted (25 Kg bag)
Supply and fixing in replacement of cloth of sludge centrifuse machine of capacity 1 cum/hr basket type complete all as directed by Engr in Charge
Supply and fixing PVC 110 mm pipe with all fittings for over flow pipe and treated water discharge pipe all as specified and directred
Supply and fix bleaching powder , calcium hypochlorite a chemical compound to disinfects and purifier water with proper chloring content complete all as specified and directed
Supply and fix MS cover of 3.0 mm thick sheet with angle iron frame (50x50x6mm) with hook , hold fast hings etc and painting it with two coat of black paint over a coat of red oxide zinc primer suitable for valve pit size 90cm x90cm x90 cm including taking out old unserviceable MS cover of any type and size obtained at site complete all as specified and directed .
Supply and fix MS cover of 3.0 mm thick sheet with angle iron frame (50x50x6mm) with hook , hold fast hings etc and painting it with two coat of black paint over a coat of red oxide zinc primer suitable for valve pit size 120cm x120cm x120 cm including taking out opld unserviceable MS cover of any type and size obtained at site complete all as specified and directed .
Supply and lay M S Pipes heavy grade with all fittings laid in floors or fixed to walls and ceilings etc of sizes 25 mm dia complete all as specified
Supply and lay M S Pipes heavy grade with all fittings laid in floors or fixed to walls and ceilings etc of sizes 50 mm dia complete all as specified
M&L for removing of submersible pumping set i.e pump and motor from borewell elecctrically driven 415 volts three phase AC 12.5HP , 12 KW having discharge capacity of 450 liters per minut at a head of 30 meters 08 stage dilivery 80 mm dia (Internal ) for repair to wksp and replace defective part or winding complete all as specified and directed. Note - T&P and manpower required in lowering of pump set shall be arranged by the contractors and unit rate of this item is included in the unit rate of this item
Supply & laying of UG cable XLPE insulated armoured heavy duty elect cable with stranded aluminium conductor 1100 volts grade cross section area 50 Sqmm 3.5 core laid in trenches/ fixing on panels/walls/poles or passing through pipe including connecting with suitable lugs, glands, nuts and bolts and testing complete all as specified and directed.
Supply and fixing in replacement of MCCB 63Amp rating,4-pole 415V, breaking capacity 16KA. Complete all as specified
Supply and fixing in replacement of MCCB 100Amp rating,4-pole 415V, breaking capacity 16KA. Complete all as specified
Earthing complete with galvanised steel earth plate electrode 60cmX60cmX6.0mm thick, buried directly in ground (earth pit not less than 2.25mtr deep below normal ground level) with top edge of the plate not than 1.5mtr below normal ground level connected to GI earth strip of size 32x6mm dia by means of bolts, nuts, check nuts and washers of galvanised iron complete earth pit of PCC M-10(Nominal mix) using 20mm graded stone aggregate, 50mm thick earth pit cover of RCC M-15 (Nominal mix) using 20mm graded stone aggregate with MS TMT reinforcement bar of 8mm dia @ 150mm centre to centre both ways, MS handle 10mm dia made to shape, PGI funnel, wire mesh and 20mm bore GI water pipe medium grade and 40mm bore medium grade GI pipe for protection of earth strip from plate to main switch board, common salt, charcoal dust including testing on completion complete all as specified and as directed all as shown in electrical plate No. 3 including testing on completion and making good the disturbed surfaces of wall floors etc without claiming extra cost all as directed by Engr-in-Charge. (Note: GI strip & GI pipe beyond 7.5Mtr length from earth electrode shall be measured and paid separately).
Supplying laying and testing PVC insulated and shethred flat submersible cable with stranded copper conductor of size 3 core 10 Sqmm 1100 volts grade including lugs and fixed in submersible pump set including taking down old unserviceable cable complete all as specified and as directd Note:- Submersible cable shall be lowered along with pumping set and discharge pipe
M&L for to prevent leakage of water pipe line at various places including required material by welding of flanged/socket/collar or at the joint of sluice valve/air release/none returne valve or damaged pipe line etc including excavation/returning and filling all as directed by Engr- in- charge.
M&L for masonry valve pit of size 90X90X90cm (Internal dimensions of chamber) built in Cement Mortar 1:6, Plain cement concrete, M-10 (Nominal mix) type C-2 (using 40 mm graded crushed stone aggregates) as in foundation filling and mass concreting and including 15mm thick plastering internally with cement mortar 1:6 and flush pointing externally as the work proceeds in same mortar and Plain cement concrete, M-15 (Nominal mix), type B-1, (using 20mm graded crushed stone aggregates) as in coping complete. 3.15 mm thick MS sheet cover, handle, locking arrangement including provision of angle iron frame 40x40x6 mm for cover and 2 foot steps made out of MS 16 mm dia round bars, wash out pipe made out of GI pipe medium grade, 50 mm dia upto 1 metre length, earth work in any type of soil including removal to a distance not exceeding 50 metre and painting steel surface with two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified and directed by Engr-in-charge.
All as per descrption of ser item No 69 above but of size 1.20 x 120x120cm complete all as specified and directed by Engr-in-Charge.
S&F Cast iron sluice valve long body type, both ends flanged and drilled, of size 100 mm bore, (ISI marked) conforming to IS-14846 -2000 with pressure rating of PN-1.6 with steel spindle and iron wheel head including jointing material such as nuts, bolts, washers and rubber gasket etc, including taking down old unserviceable sluice valve complete all as specified and directed by Engr-in-charge.
All as per descrption of ser item No 71 above but of size 80 mm bore complete all as specified and directed by Engr-in-Charge.
All as per descrption of ser item No 71 above but of size 50 mm bore complete all as specified and directed by Engr-in-Charge.
M&L for opening of pipe line GI cutting, threding supply & fixing GI socket reducer Tee 40mm x 15mm for branch connection including excavation and other releted earth work all as directed at site by Engr in Charge.
M&L for opening of pipe line GI cutting, threding supply & fixing GI socket reducer Tee 50mm x 20 mm for branch connection including excavation and other releted earth work all as directed at site by Engr in Charge.
S&F in replacement of mechanical joint suitable for 80 mm bore CI/DI/GI pipe lines with all its fittings as required for jointing the pipe lines including taking out old un-serviceable one complete all as specified and directed.
S&F in replacement of mechanical joint suitable for 100 mm bore CI/DI/GI pipe lines with all its fittings as required for jointing the pipe lines including taking out old un-serviceable one complete all as specified and directed.
S&F in replacement of mechanical joint suitable for 150 mm bore CI/DI/GI pipe lines with all its fittings as required for jointing the pipe lines including taking out old un-serviceable one complete all as specified and directed.
Cleaning away all grass ,vegetation, saplings ,shrubs ,brushwood, under growth, roots, and trees not exceeding 30 cm girth(measured one metre above ground level) and removing rubbish upto a distance of 50 metres outside the periphery of the area under clearance complete all as specified and directed.
M&L for painting for sheet metal enclosure of LT panels/Installation boards with two coats of synthetic enamel paint as directed colour after scraping of old paint & preparation of surface and applying a coat of red oxide primer complete all as specified and directed by Engr-in-Charge.
Supply and fix in repairs gun metal gate valves with iron wheel head screwed both ends for GI pipe of size 50 mm complete all as specified fand directed by Engr-in-charge.
All as per ser item No. 81 here -in-before but of size 40 mm bore, complete all as specified and directed by Engr-in Charge.
All as per ser item No.81 here -in-before but of size 25 mm bore, complete all as specified and directed by Engr-in Charge.
All as per ser item No.81 here -in-before but of size 20mm bore, complete all as specified and directed by Engr-in Charge.
M/S MALHI CONSTRUCTIONS (BID ID -3355446)
Akarsha Enterprises (BID ID -3346041)
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .