WELCOME MAINT FOR CERTAIN MD ACCN AT DARJIPURA AT AFS BARODA

Amount

M&L for preparation of old decorated plastered or unplastered surfaces of walls including cornices pilasters by brooming down or steel wire brushing, scraping down, smoke shoot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of white wash on walls complete all as specified and directed.

All as per above but applying one coat of white wash on ceiling surfaces complete all as specified and directed.

M&L for prepration of existing old decorated surfaces of walls/ concrete surfaces including scrapping, rubbing down with water cleaning the surface up to the entire satisfaction of Engineer-in-Charge and applying one coat of distemper oil emulsion complete all as specified and directed.

M&L for complete removal of existing treatment by scrapping down washing to the entire satisfaction of Engineer-in-Charge and applying two coats of distemper oil emulsion (tint as approved by GE) over and including one coat of primer complete all as specified and directed.

M&L preparation of old surfaces and applying one coat of JK/Birla Cement putty on wall/ceiling surfaces finished all as specified and directed.

M&L for preparation of old painted surfaces of wood and wood based material of any description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for preparation of old painted surfaces of steel and iron surfaces over 10cm width or grith and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for prepration of the existing surfaces on wall/concrete surfaces thoroughly washing, rubbing down in the water, cleaning upto the entire satisfaction of the Engineer-in-Charge and applying one coat of cement base paint, colour as approved by GE, complete all as specified and directed.

M&L for complete removal of existing treatment by scrapping down washing to the entire satisfaction of Engineer-in-Charge and applying two coats of Exterior acrylic Emulsion (tint as approved by GE) over and including one coat of primer complete all as specified and directed.

M&L for preparation of old decorated surfaces of wall including rubbing down and applying One coats of Exterior acrylic Emulsion all as specified (any tint shade) complete all as specified and directed.

Taking down cement plaster of any description, including racking out joints, hacking for key and scrubbing down with water etc complete all as specified and directed.

M&L rendering 10mm thick in CM (1:6) on fair faces of brick work or concrete surface, finishing surface even & smooth without using extra cement complete all as specified and directed.

M&L preparation of newly plastered or unplastered wall surfaces and applying two coats of distemper oil emulsion ( tint as approved by GE) Complete all as specified and directed.

M&L rendering 5mm thick in CM (1:3) on concrete surfaces of ceiling, finishing surface even & smooth without using extra cement complete all as specified and directed.

M&L for preparation of newly plastered surfaces of ceiling and applying three coats of white wash on ceiling including cleaning window glasses, joinery, electric fittings, wiring etc of drops and splashes and cleaning premises clean and tidy complete all as specified and directed.

Dismantling of floor, hearth or wall tiling including cement mortar bedding (but not backing) removing the rubbish outside MD land complete all as specified and directed.

M&L non skid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exc 0.11 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including screed bed 15mm thick in CM (1:6) complete all as specified and directed.

M&L for light shade Vitrified ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, over and including 20mm thcik screed bed in CM 1:6 complete all as specified and directed.

M&L for light shade Vitrified ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm as in skirting, dado etc with matching to item here in before set and jointed in neat cement slurry and pointed in white or coloured cement to match, over and including 10mm thick rendering in CM 1:4 complete all as specified and directed.

M&L for Glazed ceramic coloured tiles in vertical surface such as dado/skirting etc 450X 300X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10mm thick rendering in CM 1:4 as backing coat complete all as specified and directed

Demolition of cement Concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed.

M&L for Plain cement concrete type B-1 (1:2:4) (using 20mm graded crushed stone aggregate) as in 25mm thick sub base of flooring including finishing surfaces rough to receive floor finishes, complete all as specified and as directed.

Taking out old un-serviceable glass of any description, from old wooden or metal frames, or stone, concrete or brick surrounds,any thickness or size; hacking out old putty or removing beads etc, including making good breakages in taking out complete all as specified and directed.

S&F 4.8mm thick Sheet glass, ordinary Quality and glazing with oil putty or wooden beads in square not exc 0.5 sq. m in each pane complete all as specified and directed.

S&F 4mm thick Figured glass, pin head type and glazing with oil putty or wooden beads in squares n exc 0.5 sq. m in each pane complete all as specified and directed.

S & F in repair 15mm bore Unplasticised PVC pipes including all fittings of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc.,complete including taking down existing pipeline complete all as specified and as directed.

S & F in repair 25mm bore Unplasticised PVC pipes including all fittings of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc including taking down existing pipeline complete all as specified and as directed.

S&F in repair 15mm dia Bib taps fancy type CP, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

S&F in repair 15mm dia Pillar taps, cast copper alloy, with capstan heads, chromium plated fancy type , screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed.

S&F in repair 15mm dia Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed.

S&F in repair 15mm dia Stop valves, cast copper alloy fancy type CP, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

S&F in repair 15mm dia angle Stop cock, cast copper alloy fancy type CP, screwed down, high pressure, with crutch or butterfly handle, screwed one end for iron pipe and other end for PVC connection pipe complete all as specified and directed.

S&F in repair 15mm dia bib tap standard of PTMT fancy type any colour screwed for iron pipe and fixed (Min weight 15mm-105gms) complete all as specified and directed.

S&F in repair 15mm dia Pillar tap standard of PTMT fancy type any colour screwed for iron pipe and fixed (Min weight 15mm-120gms) complete all as specified and directed.

S&F in repair 15mm dia angle stop cock standard of PTMT fancy type any colour screwed for iron pipe and fixed (Min weight 15mm-120gms) complete all as specified and directed.

S&F in rapair PVC Connection 15mm size 450mm long complete all as specified and directed.

S&F in repair stainless steel bright finish round shape 100mm size grating fixed over floor trap in white or gray cement to match with existing floor complete all as specified and directed.

S&F in repair shower rose brass chromium plated 125mm size with swivel arm etc complete all as specified and directed.

S&F in repair 32mm size Waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed.

S&F in repair stainless steel Jet spray for EWC complete all as specified and directed.

S&F in repairs health faucets (ABS Body) mild steel, CP suitable for 15 mm bore GI pipe with 1.25 M long flexible tube and ABS wall hook including making connection and fixed in position complete in all respect all as specified and directed.

Cleaning and removing all scale and dirt, etc, from tanks exc 500 and n.exc 1000 ltr capacity and from mouths of circulating pipes, etc complete all as specified and directed.

Cleaning and removing all scale and dirt, etc, from tanks exc 1000 and n.exc 2000 ltr capacity and from mouths of circulating pipes, etc complete all as specified and directed.

S&F in repair PVC water storage tank cover for 500/1000/2000 ltr capacity with pvc nut and bolt and fixing arrangement

S&F in repair vitreous china wash hand basin, white flat back size 550 x 400 mm including waste pipe,waste coupling,PVC connection 450 mm long, brackets etc complete all as specified and directed.

S&F in repair Vitreous China wash down water closet pan (pedestal pattern), white (including fixing bolts, and flush pipe) complete all as specified and directed.

S&F in repairs vitreous china squatting pan water closet ‘orrisa’ pattern size 580x440mm incl. Integral foot rest including cement concrete bedding etc complete all as specified and directed.

S&F in repair water closet seat black/white closed pattern with flat bottom and cover and MS chrominium plated or aluminium hinging device complete all as specified and directed.

S&F in repair 10 ltr capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets complete all as specified and directed.

S&F in repair sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm and bowl size 410mm x 330mm x 160mm complete all as specified and directed.

S & F in repairs stainless steel plate rack of size not less than 900mm x900x250mm complete all as specified and directed.

S&F in repair SS Tubular towel rail 450mm long incl fixing arrangements complete all as specified and directed.

S&F in repair PVC Box type mirror cabinet 450x350 mm size modular type complete all as specified and directed.

S&F in repair Sheet glass bath corner shelf assembly consisting of 5.5mm thick sheet glass shelf having radius 20 to 25 cm with chromium plated bracket guard and railing complete all as specified and directed.

S&F in repairs stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed to aluminium windows shutters incl aluminium beading etc complete all as specified and directed.

Resecuring or easing & adjusting without taking down shutters of any description exc 1 sqm and n exc 2 sqm each complete all as specified and directed.

S&F in repair 150 mm Aluminium anodised tower bolts of extruded section including screws complete all as specified and directed.

S&F in repair 300mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.

S&F in repair 100mm size butt hinges stainless steel medium weight complete all as specified and directed.

S&F in repair 150mm size Aluminium handles, cast type, anodized complete all as specified and directed.

S&F in repair 25mm dia aluminium anodised tubular curtain rod with powder coated finish, including brackets and support complete all as specified and directed.

S&F in repair Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed.

S&F in repair Mortice lock stainless steel vertical type size 100mm 2 levers fixed to wooden or Aluminium door shutters complete all as specified and directed.

S&F in repair PVC waste pipe 32mm size with PTMT nuts of length 600 mm for wash hand basin/urinal/sink etc complete all as specified and directed.

S&F Name Plate made ut of 2mm thick acrylic sheet (area n. exe. 0.15 Sqm each plate) with reflective tape and fixed to wall wirh suitable SS Scrwes in OMQs etc complete all as specified and directed.

S&F in repairs Rotational moulded polyethylene water storage tanks 500 ltr capacity (cylindrical vertical with closed top) hoisted and fixed in position including taking down the existing one all as specified in SSR Part I complete all as specified and directed.

S&F in repairs Rotational moulded polyethylene water storage tanks 1000 ltr capacity (cylindrical vertical with closed top) hoisted and fixed in position including taking down the existing one all as specified in SSR Part I complete all as specified and directed.

M/S TANUSHREE CONSTRUCTION COMPANY (BID ID -3170522)

SITA CONSTRUCTION COMPANY (BID ID -3170498)

M/s GANGA CONSTRUCTION (BID ID -3170524)