ASOM_MALA_ 23_24_ 02 Renovation of RRNMU Building at Silchar Charged from the contingency component of Improvement and Upgradation of Road from Dholai Bazar Dwarbond Grant _Aizawl Dwarbond Road Ch. 4.800 Km. Rajnikhal to Ch 18.150 Km. Dwarbond Grant

Providing and plain multipurpose cement board High Pressure steam cured with suitable screws for cement paticle board in ceiling etc complete frame work to be add seperately 12 26 1 16 mm thick cement fibre board as per IS 14862

Finishing with Epoxy paint two or more coats at all locations prepared and applied as per manufactures specification including appropriate priming coat preparation of surface etc complete 13 52 2 on concfrete work inner wall and outer wall

Steel work in built up tubular round square or rectangular hollow tubes etc truss etc including cutting hoisting fixing in position and applying a priming coat of approved steel primer including welding and bolted with special shaped washers etc complete 10 16 1 Hot finished welded type tube Steel post 114_3mm OD x 5 mm WT Shear concrete 12 mm dia MS bar Tubular Truss per 15 kg per sqm

Providing currugated GS Sheet roofing including vertical cured surface fixed with polymer coated J or L hooks bolts and nuts 8 mm diameter with bitumen and GI limpet ashes or GI limpet washers filed with white lead including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete upto any pitch in horizontal or vertical or curved surface excluding the cost of purlins rafters and trusses and including cutting to size and shape wherever required 12 1 2 point80 mm thick with zinc coating not less than 275 kg per sqm

Providing or hips of width 60 cm overall width plain GS sheet fixed with poly coated J or L hooks bolts and nuts 8 mm dia GI limpet and bitumen washers complete 12 4 2 point 63 mm thick zinc coating not less than 275 gram per sqm

Providing and laying Vitrified tiles in floor in different sizes thickness to be specified by the manufacturer with water absorption less than point08 percent and conforming to 15 15622 of approved brand and manufacturer in all colours and shade laid on 20 mm thick cement mortar ratio of1 colon 4 that is 1 cement 4 coarse sand Jointing with grey cement slurry 3.3 kg per sqm including grouting the joints with white cement and matching pigments etc The tiles must be cut with the zero chipping diamond cutter only Laying of tiles will be done with the notch trowel plier wedge clips of required thickness leveling system and rubber mallet for placing the tiles gently and easily 11 41A 1 Double charge vitrified tile polished finish of size. 11 41A 1.3 Size of Tile 600 x 1200 mm

Steel reinforcement for RCC work including straightening cutting bending placing in position and binding all complete upto plinth level 5 22 6 Thermal Mechenically Treated bars of grade Fe 500D or more 12 mm dia for column 8mm for stirrups and 125 CC

Centering and shuttering including srutting propping etc and removal of form work for 4 3 3 column piers abutments pillars posts and struts

WATER SUPPLY WORKS Providing and fixing Polyethelene Aluminium-Polyethelene PE AL PE Composite Pressure Pipes conforming to IS 15450 UV stabilized with carbon black having thermal stability for hot and cold water supply capable to withstand temperature up to 80 degree Celcius including all special fittings of composite material engineering plastic blend and brass inserts wherever required example elbows tees reducers couplers and connectors etc with clamps at 1 metre spacing This includes testing of joints complete as per direction of the Engineer Incharge. 18 1.5 3240 40 mm OD pipe

Providing and fixing Polyethelene Aluminium-Polyethelene PE AL PE Composite Pressure Pipes conforming to IS 15450 UV stabilized with carbon black having thermal stability for hot and cold water supply capable to withstand temperature up to 80 degree Celcius including all special fittings of composite material engineering plastic blend and brass inserts wherever required example elbows tees reducer couplers and connectors etc with clamps at 1 metre spacing This includes testing of joints complete as per direction of the Engineer Incharge. 18 1.3 2025 25 mm OD pipe