GENERAL PWD BUILDINGS SECTION OFFICE CHADAYAMANGALAM RENOVATION OF OFFICE BUILDING General Civil Work

Amount

Renovation works

14.43:Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.

14.1.1:Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground within 50 meters lead:With cement mortar 1:4 ( 1 cement : fine sand)

13.43.1:Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer

14.53.1:Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade:One or more coats on old work

14.66.1:Finish walls with Acryllic Smooth exterior paint of required shade:Old work ( Two or more coats applied @ 1.67 ltr/10 sqm) on existing cement paint surface

13.61.1:Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work

13.62.1:Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade:Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture .

50.9.15.3:Providing and fixing iron hooks and eyes : 200mm.

9.55.1:Providing and fixing ISI marked M.S. pressed butt hinges bright finished with necessary screws etc, complete:125x65x2.12 mm

9.100.1:Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete:125 mm

OD185370/2022-2023:Roofing with Alumnium Trafford sheet 0.50 mm thick or nearest available thickness with overlaps of 150mm at ends and seam bolts and nuts 6mm and 25mm long including plain washers and bitumen washers etc. complete 

OD184969/2022-2023:Supplying and fixing Telescopic channel one set using kitchen cup board or drawer for cubicle

OD184970/2022-2023:Providing and fixing glazing in partition etc. with EPDM rubber/neoprene gasket etc. complete as per drawing and direction of deptl. engineer at site

OD184971/2022-2023:Providing and fixing skirting with High Density water resistant panel board exterior grade 18mm thick marked with necessary fixing arrangements and screws including drilling necessary holes for raw plugs etc. and edges to be sealed with PVC edge binding tape 2.00mm thick of approved brand

OD185410/2022-2023:Supplying and fixing office chair with hand etc.complete

OD186549/2022-2023:Supplying Branded executive chair with hand support etc.complete

OD185413/2022-2023:Providing Nilkamal plastic chair

OD185409/2022-2023:Engaging man coolies

OD185417/2022-2023: Providing, supplying and fixing 3 mm ACP with vinyl sheet sticker for DLP board

OD185420/2022-2023:Carpenter for wood work

OD185437/2022-2023:Engaging Mason

2.32:Clearing grass and removal of the rubbish up to a distance of 50 m outside the periphery of the area cleared.

15.2.1:Demolishing cement concrete manually / by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in-Charge.Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix)

16.68:Providing and laying 60 mm thick factory made cement concrete interlocking paver block of M - 30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge.

10.16.2:Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished seamless type tubes

Abhilash.T

ANIMON G K

Bidder Name

SAJAN DANIEL

ANIMON G K

Abhilash.T