Vivekadhin 2026-2027

It No Description Of Item Qty Rate Amount

Type of tipper - box body tipper

Tipper container capacity / volume

2.5 - 8.0 or higher (cubic meters)

Bottom & side plate thickness 2.0 - 6.0 or higher (mm)

All other plate thickness 1.6 - 6.0 or higher (mm)

Tipper sub frame thickness 3.0 - 8.0 or higher (mm)

Tipper container material mild steel, stainless steel or higher

Vehicle category n1 (gvw <= 3.5 tonnes)

Chassis load carrying capacity (kg) 900.0 - 10000.0 or higher

Gross vehicle weight (kg) 1900.0 or higher

Wheel base 2000 mm or higher

Type of fuel diesel

Axle configuration 4 x

Maximum engine output / power (kw) 19.4 - 150.0 higher

Maximum engine torque (nm) 58 nm @ 1800-2200 or higher

Engine cubic capacity 900 cc or higher

Engine cylinder no 2 or higher

Tyre size 155 r13 or higher

Vehicle emission compliance bs vi

Air conditioning in driver cabin no

Seating capacity in the cabin (including driver) 2, 3, 4 or higher

Certification type chassis certification along with form

Chassis warranty 1 years / 80000 km (which ever is earlier)

Chassis overall length 3925 mm or higher

Chassis overall width 1540 mm or higher

Chassis overall height 1910 mm or higher

Fuel tank capacity 30 litres or higher

Min. Ground clearance 200 mm or higher

Partition for dry & wet waste yes

Hydraulic system drive power pack / pot

Hydraulic cylinder 2 ton

Hydraulic cylinder make lift well / techno

Paint as per msw scheme type of tipper box body tipper

Tipper container capacity / volume

2.5 - 8.0 or higher (cubic meters)

Bottom & side plate thickness 2.0 - 6.0 or higher (mm)

All other plate thickness 1.6 - 6.0 or higher (mm)

Tipper sub frame thickness 3.0 - 8.0 or higher (mm)

Tipper container material mild steel, stainless steel or higher

Vehicle category n1 (gvw <= 3.5 tonnes)

Chassis load carrying capacity (kg) 900.0 - 10000.0 or higher

Gross vehicle weight (kg) 1900.0 or higher

Wheel base 2000 mm or higher

Type of fuel diesel

Axle configuration 4 x

Maximum engine output / power (kw) 19.4 - 150.0 higher

Maximum engine torque (nm) 58 nm @ 1800-2200 or higher

Engine cubic capacity 900 cc or higher

Engine cylinder no 2 or higher

Tyre size 155 r13 or higher

Vehicle emission compliance bs vi

Air conditioning in driver cabin no

Seating capacity in the cabin

(including driver)

2, 3, 4 or higher

Certification type chassis certification along with form

Chassis warranty 1 years / 80000 km (which ever is earlier)

Chassis overall length 3925 mm or higher

Chassis overall width 1540 mm or higher

Chassis overall height 1910 mm or higher

Fuel tank capacity 30 litres or higher

Min. Ground clearance 200 mm or higher

Partition for dry & wet waste yes

Hydraulic system drive power pack / pot

Hydraulic cylinder 2 ton

Hydraulic cylinder make lift well / techno

Paint as per msw scheme

Note:- The bidder should submit the quoted rate including all charges.

The bill will be processed after receipt of the third-party inspection report