GE/J/A 2021-22(9013/E8)

Amount

(A) WATER COOLERS:- M&L for disconnecting, loading, unloading and transportation of Water coolers from existing location and position in A/A site for repairing of Water coolers of any make/capacity including reinstallation and testing at site after repairs all as directed by Engr-in-Charge NOTE : (i) Material required for defective / U/S parts shall be paid separately under relevent items.

M&L for checking of Water cooler of any make / capacity in location and position at any site in AA Jodhpur including necessary servicing i.e. making good electrical including copper terminal, cleaning , drain water system including replacement of hose clamp etc . complete , cleaning condensor , condenser fan motor , door gasket , cleaning storage water tank cleaning and testing for proper functioning ofwater cooler all as directed by Engr-in-Charge.( The rates are deemed to be included for maintaining complete and proper record of machine ie: make with srl no ,SM no. capacity, date of servicing , user signature after servicing , concerned JEs signature all as directed by Engineer in-charge )

Material and labour for replacement of unserviceable hermetically sealed compressor of water cooler 150 Ltr storage having cooling capacity 100 Ltrs / hour Capacity with fresh new uncut sealed unit compressor including suitable relay and over load with new sealed unit as per the company scheme supplied by the manufacturer complete including flushing out system, checking and rectfication of leakage, gas charging, complete (Makes :- Tecnomush/Kirloskar copeland/ LG) NOTE : (i) The rate quoted by the contractor shall be inclusive of all charges ie: test certificate and necessary guarantee period as per manufacturing company (ii) The new unit will be purchased from authorised dealer only as per existing make and model, complete all as specified and as directed.

All as per above item No 3 but 60/120 Ltr storage capacity with cooling capacity 60 Ltrs / hour water cooler of any make : TECUMSHA/KIROSKAR COPELAND/ LG

All as per above item No 3 but 40/80 Ltr storage capacity with cooling capacity 40 Ltrs / hour water cooler of any make : TECUMSHA/KIROSKAR COPELAND/LG.

Material and Labour for replacement of copper filter and capillary tube of water cooler cooling capacity 40 Ltr/hrs, complete all as specified and as directed.

Material and Labour for replacement of of cooper filter and capillary tube of water cooler cooling capacity 60 Ltrs per hour, complete all as specified and as directed.

Material and Labour for replacement of cooper filter and capillary tube of water cooler cooling capacity 100 Ltr per hour, complete all as specified and as directed.

Material and Labour for replacement of relay with over load protection for 40/80 Ltr/hrs cooling capacity suitable as per site requirement, complete all as specified and as directed. (Make : Ranutrol/Rockwell/Annapurna)

Material and Labour for replacement of relay with over load protection for 60Ltr/hrs cooling capacity suitable as per site reuqirement, complete all as specified and as directed. (Make : Ranutrol/Rockwell/Annapurna)

Material and Labour for replacement of relay with over load protections for 100 Ltr/hrs cooling capacity suitable as per site requirement, complete all as specified and as directed. (Make : Ranutrol/Rockwell/Annapurna)

Material and Labour for replacement of condensor fan motor HP-1/32, RPM-1300 suitable for water cooler having cooling cap 40 Ltr/hr with clips and motor fixing stand with fan bladeISI marked, complete all as specified and as directed. Make ; AUE or Equivalent

Material and Labour for replacement of condensor fan motor HP-1/16, RPM-1300 suitable for water cooler having cooling cap 60 to100 Ltr/hr with clips and motor fixing stand with fan blade ISI marked, complete all as specified and as directed. Make ; AUE or Equivalent ISI marked

Material and Labour for Repalcement of thermostat switch with knob for water cooler, having cooling capacity 40/60/150 Ltrs/hr, complete all as specified and as directed. (Make : Rasnutrol no 1051 or Indfoss No 2064/Annapurna)

Material and Labour for patch repair work of worn out MS body of water cooler any capacity made out of 22 gauge mild steel sheet including welding and making good with paint to match with existing, complete all as specified and as directed by Engineer-in-Charge.

Material and Labour for replacement of drain PVC pipe, 25 mm bore for cooling cap 40 Ltr /Hrs 90 cms in length with two Nos mild steel clamps and necessary brass screws etc, complete all as specified and as directed. (Make : RAJDOOT/KOHINOOR)

All as per above item No. 16 but size 32 mm bore suitable for cooling Cap 60 to 100 Ltrs/Hrs water cooler and not more than 1.00 meter all as directed

Material and Labour for replacement of SS drain water tray made out of 24 gauge stainless Steel sheet of size of 30x12x5 cm deep with necessary GI screws and PVC drain water connection arrangement of size not less than 25 mm dia, complete all as specified and as directed. (as per sample)

Material and Labour for replacement of water storage tank top lid complete made out of 22 gauge mild steel sheet of existing shape and size for water cooler storage cap 120 to 150 Ltrs , of appropriate thickness on one side with door gaskit including , aluminium hinges 50 mm long 2/3 nos. and making good and painting with approved colour to match the existing colour, complete all as specified and as directed.

Material and Labour for replacement of water storage tank top lid complete made out of 22 gauge mild steel sheet of existing shape and size for water cooler cap 80Ltrs., platic sheet of appropriate thickness on one side with door gaskit including , aluminium hinges 50 mm long 2/3 nos. and making good and painting with approved colour to match the existing colour, complete all as specified and as directed.

Material and Labour for replacement of rubber magnet gasket fixed with top cover of water cooler of 80/120 litres storage capacity, complete all as specified and as directed.

Material and Labour for replacement of rubber magnet gasket fixed with top cover of water cooler of 150 litres storage capacity, complete all as specified and as directed.

Material and Labour for replacement of worn out bottom base of water cooler foundation frame made out of 1.6mm thick MS sheet for water cooler, & frame work made out of angle iron25x25x3 mm, including cutting welding brazing soldering , making holes for sealed unit , condenser with condensor fan motor , including painting black colour ( two coats ) synthetic enamelled paint over a coat of red oxide primer etc and finishing, complete all as specified and as directed by Engineer-in-Charge.

Material and labour for replacement of water cooler body back sheet with 22 gauge mild steel sheet including suitable size( as per existing) and necessary painting, screws etc, complete all as specified and as directed by Engineer-in-Chage

Material and Labour for replacement of water cooler front pannel with 20 gauge mild steel sheet including suitable size( as per existing) and necessary screws/nuts/bolts/washers etc. for 40 ltrs/hour capacity, complete all as specified and as directed by Engineer-in-Charge.

Material and Labour for replacement of condensor fan motor mounting stand made out of mild steel sheet 3 mm thick size 400x150 mm and refixing on the existing base, complete all as specified and as directed by Engineer-in-Charge.

Material and labour for replacement of foundation stand of water cooler fabricated out of angle iron 25x25x3 mm 1600 mm in length incl. Welding and necessary fitting with patch work to bottom portion of 20 gauge MS sheet size 40x15 cm, complete all as specified and as directed.

Supply and fix CP lift cock, 15mm bore made of brass self closing vertical type made of brass nickle chromium plated with CP adaptor and nipple, complete all as specified and as directed. Make : Mayor/C-Sons/G-Sons

Supply and fix CP push cock, 15mm bore made of brass self closing horizontal type made of brass nickle chromium plated with CP adaptor and nipple -Make : Mayor/C-Sons/G-Sons

M&L for permanent type stiker of size 150x300 mm having following details in letters not exceeding 25 mm, complete all as specified and as directed. (i) Machine Srl No______________. (ii) MES No___________________. (iii) Date set to work.____________. (iv) PRB Page No ______________. (v) Location___________________.

Material and labour for painting to water cooler of storage cap. 150/120/80 Ltrs spray painting with two coats of synthetic enamelled paint (first quality) including preparation of surface, complete all as specified and as directed. Make: ASIAN /BERGER /NEROLAC .

Material and labour for replacement of detoriated glass wool and tar felt of water cooler complete including fixing etc, complete all as specified and as directed. of any cap

Material and labour for repair to storage water tank of cooler of cooling cap 40 Ltr/hour by soldering / brazing to prevent leakage spots incl. cleaning of water tank and testing, complete all as specified and as directed. (NOTE : work is to be carried out in existing position as and where machine in army area)

Material and labour for repair to water tank cooler of cooling cap 60 Ltr/hour cap. by soldering, brazing to prevent leakage spots incl. cleaning of water tank and testing, complete all as specified and as directed. (NOTE : work is to be carried out in existing positio as and where machine lyes in army area)

Material and labour for repair to water tank of water cooler of cap. 150 ltrs/hrs, by soldering / brazing to prervent leakage spots incl. cleaning of water tank and testing, complete all as specified and as directed. (NOTE : Repairing to be done by the contractor at various location of units).

Material and labour for replacement of starting capacitor 40-60 Mfd oil filled 240 volt AC Supply , complete all as specified and as directed. Make : Asian/Atlas/Epcos/SPAN/Sharda Texla

Material and labour for replacement of starting capacitor 60-80 Mfd oil filled 240 volt AC Supply, complete all as specified and as directed. Make : Asian/Atlas/Epcos/SPAN/Sharda Texla

Material and labour for replacement of running capacitor of 15 Mfd oil filled, complete all as specified and as directed.Make : Asian/Atlas/Epcos/SPAN/Sharda

Material and labour for replacement of running capacitor of 10 Mfd oil filled, complete all as specified and as directed. Make : Asian/Atlas/Epcos/SPAN/Sharda

Material and labour for replacement of running capacitor of 2.5 Mfd oil filled, complete all as specified and as directed. Make : Asian/Atlas/Epcos/SPAN

Material and labour for PVC float valve 15 mm bore with PVC float, ball ISI marked complete with check nut/socket/GI nipple, complete all as specified and as directed. by Engineer-in-Charge Make: PRAYAG/ POLYTUFF

Material and labour for replacement of water cooler side panel with 20 gauge MS sheet as per sample incl. necessary screws/nuts/bolts/washers etc for 40/60/150 Ltrs/hour cap, complete all as specified and as directed. by Engineer-in-Charge

Material and labour for pressurising of system & detecting of leakages in system , flushing , replacement of copper filter and gas (using maffron M- 134 gas ), oil complete incl testing and commissioning of water cooler having cooling Capacity 40 Ltrs per hour of any make, complete all as specified and as directed.

Material and labour for pressurising of system & detecting of leakages in system , flushing , replacement of copper filter and Gas (using maffron gas - M-134 ) charging , oil complete incl testing and commissioning of water cooler having cooling Capacity 60 Ltrs per hour of any make, complete all as specified and as directed.

Material and labour for pressurising of system & detecting of leakages in system , flushing , replacement of copper filter and gas charging of Gas (using maffron gas M-134 ), oil complete incl testing and commissioning of water cooler having cooling Capacity 100 Ltrs per hour of any make, complete all as specified and as directed.

Material and labour for replacement of aluminium fan blade for condenser fan motor (as per sample) suitable for water cooler having cooling capacity 40 Ltr/hr water cooler, complete all as specified and as directed.

Material and labour for replacement of aluminium fan blade for condenser fan motor (as per sample) suitable for water cooler having cooling capacity 60/150 Ltr/hrs water cooler, complete all as specified and as directed.

Material and labour for replacement of condenser unit complete suitable for 40 Ltr/hrs cap. Water cooler including gas charging flushing out the system brazing, welding and jointing the suction reed and discharge reed complete all as per direction of Engineer-in-Charge

Material and labour for replacement of condenser unit complete suitable for 60 to 100 Ltr/hrs cap. Water cooler including gas chargin flushing out the system brazing, welding and jointing the suction reed and discharge reed complete all as per direction of Engineer-in-Charge

Material and labour for replacement of condenser unit complete suitable for 150 Ltr/hrs cap. Water cooler including gas charging flushing out the system brazing, welding and jointing the suction reed and discharge reed complete all as per direction of Engineer-in-Charge

Material and labour for replacement of PVC insulated and PVC sheathed flexible cable , multistranded copper conductor 3 core 48/0.20 cross sectional area superior quality, complete all as specified and as directed. Make : Plaza/Finolex/Polycab

(B) -Refrigerators/ Deep freezer:- M&L,checking of Refrigerators/ Deepfreezer of any make / capacity in location and position at any site in AA Jodhpur including necessary servicing ie: electrical connection /wiring, cleaning , door gasket cleaning evaporator cleaning and testing for proper functioning of refrigerators/ deep freezer all as directed by Engr-in-Charge.( The rates are deemed to be included for maintaining complete and proper record of machine ie: make with srl no ,SM no. capacity, date of servicing , user signature after servicing , concerned JEs signature all as directed by engineer incharge )

Material and labour for replacement of unserviceable hermetically sealed compressor of Deep freezer 405 Ltr Capacity with fresh new uncut sealed unit compressor including suitable relay and over load with new sealed unit as per the company scheme supplied by the manufacturer complete including flushing out system, checking and rectfication of leakage, gas charging, complete all as specified and as directed. NOTE : (i) The rate quoted by the contractor shall be inclusive of all charges ie: test certificate and necessary guarantee period as per manufacturer company .(ii) The new unit will be purchased from authorised dealer only as per existing make and model

Material and labour for replacement of unserviceable hermetically sealed compressor of Refrigerator / deep freezer 310/280 Ltr Capacity with fresh new uncut sealed unit compressor including suitable relay and over load with new sealed unit as per the company scheme supplied by the manufacturer complete including flushing out system, checking and rectfication of leakage, gas charging, complete all as specified and as directed. NOTE : (i) The rate quoted by the contractor shall be inclusive of all charges ie: test certificate and necessary guarantee period as per manufacturer company .(ii) The new unit will be purchased from authorised dealer only as per existing make and model.

All as per above item No 54 but for 165/170/180 /220 Ltr capacity refrigerator, complete all as specified and as directed. Make tecansha/LG

Material and labour for replacement of relay suitable for 286/310/320 Litres cap. Refrigerator, complete all as specified and as directed. (Make : Renutrol/Shriram/Annapurna/KLIXON)

All as per above item No 56 but cap 165/220 Ltrs Refrigerator

Material and labour of replacement of thermostat automatic defrost with knob suitable for 165 to 310 liters cap refrigerator, complete all as specified and as directed. (Make : Annapurana/Indofos)

Material and labour for replacement of door gasket of best quality complete suitable for 286/310 litres cap. Refrigerator as per manufacturer's instruction and as directed by Engr-in-Charge.

All as per above item No 59 but for 165/220 Ltrs Cap.

Material and labour bulb for pin/screw type, 230 Volts suitable up to310 Ltrs Cap. Refrigerator as in replacement, complete all as specified and as directed.

Material and labour for replacement of freezer door incl. necessary door springs, screws etc for 286/310 Ltrs Cap. Refrigerator complete all as specified and directed by Engr-in-Charge.

All as per above item No 62 but for 165/220 Ltrs cap. Refrigerator.

Material and labour for replacement of door lock with keys-2 nos. for any capacity of refrigerator as per sample approved by Engr-in-Charge.

Material and labour for replacement of PVC asscessories suitable for 286/310 Ltrs Cap. Refrigeraator complete of matching size, complete all as specified and as directed.

Material and labour for replacement of PVC asscessories suitable for 165/170/180 ltrs capacity refrigerator complete of matching colour, complete all as specified and as directed.

Material and labour for patch work/ door repair (in the outer body of water cooler/refrigerator/Deep freezer with 20 gauge PGI sheet upto required length/width &hight incl necessary welding/brazing etc all as directed by Engr-in-Charge.

Material and labour for patch work/ repair of bottom of deep freezer(capacity upto 320/405 ltr ) with 22/24 gauge PGI sheet upto upto required length/width &hight incl necessary welding/brazing etc all as directed by Engr-in-Charge.

Material and labour for replacement of refrigerator door handle of 165 to 320 Ltrs Cap. Of any make and model, complete all as specified and as directed.

Material and labour for repairing to bottom/ foundation of refrigerator any cap. With 20 gauge PGI sheet, angle iron frame made out of 25 X 25 X3 mm angle and incl necessary welding work all as directed by Engr-in-Charge

Material and labour for replacement of evaporator ( Freezer ) assy with door and fixing brackets complete with screw, jointing of tubes etc and testing of cap220 to 320 Ltrs refrigerator (any make), complete all as specified and as directed.

All as per above item No 71 but of capacity 165/180 Ltr refrigerator.

Material and labour for replacement of condensor unit of refrigerator cap.280/ 286/310/320 Ltrs of any make incl jointing of tubes and testing etc, complete (gas charging will be measure and paid under relevant item separately), complete all as specified and as directed.

All as per above item No 73 but for 165/180/220 ltrs capacity refrigerator.

Material and labour for leakage detection including flushing out system,pressurising,including gas charging(as per existing) suitable for 286/310 ltrs.

Material and labour for leakage detection including flushing out system,pressurising,including gas charging (as per existing ) suitable upto 220 ltrs, complete all as specified and as directed.

M&L for permanent type stiker of size 150x300 mm having following details in letters not exceeding 25 mm, complete all as specified and as directed. (i) Machine Srl No______________. (ii) MES No___________________. (iii) Date set to work_____________. (iv) PRB Page No ______________. (v) Location____________________.

Supply and replacement of metal clad enclosure complete with plug and socket duly fitted with MCB SP - 10 Amp, complete all as specified and as directed. Make: ABB/LEGRAND

Material and labour for sub main /Circuit wiring with 1.5 sq mm copper conductor cable 1100 volts grade conforming to relevant IS and ISI Marke including same size of earth wire and taking out old unserviceable sub main wiring including Making good to distrubed surface, complete all as specified and as directed.

Supply and replacement of condensor fan motor complete for deep freezer cap.310 to 405 ltrs. In existing location and position as per sample, complete all as specified and as directed.

Material and labour for replacement of timer frost free refrigerator as per sample, complete all as specified and as directed.

Material and labour for replacement of fan motor double door frost free refrigerator as per sample, complete all as specified and as directed.

Supply and replacement of PCB as per existing suitable for 220 to 320 Ltrs refrigerator/Deep Freezer, complete all as specified and as directed.

Material and labour for carefully dismentling of automatic voltage stablilzer electronic type of cap up to 3 KVA of any make including replacement of PCB and transformer complete kit reassembling and testing etc, complete all as specified and as directed.

Supply and replacement of 3 Pin Plug Top 16 Amps ISI Marked 230 Volts, complete all as specified and as directed. Make: CONA/PLAZA/Legrand

Supply and replacement of 3 Pin Plug Top 06Amps ISI Marked 230 Volts, complete all as specified and as directed. Make: CONA/PLAZA/Legrand

Material and labour for replacement of PVC Connection pipe ISI Marked 300mm long heavy duty, complete all as specified and as directed.

Material and labour for replacement of PVC stop cock ISI Marked heavy duty, complete all as specified and as directed.

(C) DESERT COOLERS:- Material and labour for (in existing location and position) taking out and refixing after repairs, including rewinding of Desert Cooler fan motor of any make, 3 speed,1400 RPM of capacity 1/5 HP with super enameled copper winding wire of appropriate size ( as per existing ), complete all as specified and as directed. Make of winding wire : DEVIDAYAL /CHETAK complete

Supply and replacement of bush for cooler fan motor as per existing sample, complete all as specified and as directed.

Supply and replacement of shaft for cooler fan motor as per existing sample, complete all as specified and as directed.

Supply and replacement of oil filled capacitor 4.00 MFD for desert cooler fan motor, complete all as specified and as directed. Make : EPCOS/SHARDA/KENSTAR

Material and labour for replacement of bottom tank and top ( in existing location and position) of approx size - 750 X 750 X 200 mm ( as per existing ) for Desert Cooler made out of 18 gauge PGI sheet with and including two coats of synthetic enamel painting over one coat of red oxide primer on the new surfaces to match with existing surface outside and inside surface with approved quality paint including leakage testing complete all as directed by Engineer-in-charge.

Material and labour for ( in existing location and position ) replacement of front grill ( as per existing )( horizontal and vertical members moveable) of the Desert Cooler made out of 20 gauge PGI sheet with Name plate complete all as approved by Engineer-in-charge.

Material and labour for replacement of side supporting columns to be fabricated out of 20 gauge PGI sheet of size 80x80x800 mm with and including necessary nut, bolts etc .all as directed by Engineer-in-charge.

Material and labour for replacement of side/rear panel made out of 22 gauge PGI Sheet with suitable handles with and including two coats of synthetic enamel paint over one coat of red oxide primer to match with the existing desert cooler all as directed by Engineer-in-charge.

Material and labour for painting to old steel surfaces of Desert cooler capacity up to 5000 Cft with one coat of synthetic enamel spray paint hammer tone paint of approved colour over one coat of red oxide primer on external surface and one coat of anti corrosive black paint inside the Body tank and side grills over a coat of red oxide primer complete including scraping/rubbing with wire brush on old surface of Desert cooler and writing of MES No etc complete at site or at E/M store yard all as specified and directed by Engineer-in-Charge .

Material and labour for replacement of Desert Cooler fan motor capacity 1/5 HP three speed, 1400 RPM single phase with aluminium fan blade, bracket supporting stand complete all as directed by Engr-in-Charge . Make: Crompton/ GEC/COOL HOME.

Material and labour for replacement of submersible pump of discharge head 2.5 Mtr 220-240 Volts AC Supply single phase 40 watt complete all as directed by Engr-in-Charge . MAKE : RADO KR-1900/Khaitan/Coolhome

Material and labour for replacement of Wood wool pad for Desert Cooler of size 500 x 550 x30 mm (set of three pads) superior quality including binding properly with GI wire of 16 SWG with grill complete all as directed by Engr-in-Charge .

Material and labour for replacement of MS weld wire mesh having apparture size 25 mm and fitted in side grills/rear complete all as directed by Engr-in-Charge.

Material and labour for replacement of Wood wool pad Heavy duty for Desert Cooler of suitable size (set of three pads) superior quality including binding properly with GI wire of 16 SWG with grill complete all as directed by Engr-in-Charge .

Material and labour for replacement of PVC insulated and PVC sheathed cable copper conductor 3 core 1.0 Sqmm cross sectional area superior quality complete all as directed by Engr-in-Charge .. Make: Plaza/Finolex

Material and labour for replacement of PVC water distribution cup of one inlet and 3 outlets fixed with MS nuts and bolts complete (as per sample) all as directed by Engr-in-Charge .

Material and labour for replacement of PVC elbow suitable for desert cooler (as per sample) all as directed by Engr-in-Charge .

Material and labour for replacement of PVC pipe 15 mm dia heavy duty for Desert Cooler Pump complete all as directed by Engr-in-Charge .

Material and labour for painting to desert cooler stand with two coats of synthetic enameled paint of approved colour over a coat of red oxide primer including preparation of old surfaces complete all as specified and directed by Engineer-in Charge.

Material and labour for replacement of 3 pin plug top cap 5 Amp AC 240 Volts 50 Hz all as directed by Engr-in-Charge . Make :CONA / VINAY/Anchor

Material and labour for replacement of 3 pin plug top cap 15 Amp single phase AC Supply 240 Volts all as directed by Engr-in-Charge . Make :CONA / VINAY/Anchor

Material and labour for replacement of motor fixing ring (not less than 25 mm width ) for desert cooler eight screw / clip type(asper sample) complete all as directed by Engr-in-Charge .

Supply and replacement of 4mm thick ply ISI marked duly making hole for fixing single cooler in window of approximate size 1.5X1.2 mtrs for cooler grill approximate 24"X24" to be replaced in existing location and position in army area complete all as directed by Engr-in-Charge .

M&L for taking down desert cooler installed at ground floor safely , including cleaning inside , outside , motor oilng sevicing and pump servicing including putting up in same location and position, complete all as specified and as directed. NOTE: Any replacement of spare shall be measured and paid separately under respective item of schedule 'A'.

M&L for taking down desert cooler installed at first floor safely , including cleaning inside , outside , motor oilng sevicing and pump servicing including putting up in same location and position, complete all as specified and as directed. NOTE: Any replacement of spare shall be measured and paid separately under respective item of schedule 'A'.

M&L for taking down desert cooler installed at second floor safely , including cleaning inside , outside , motor oilng sevicing and pump servicing including putting up in same location and position , complete all as specified and as directed. NOTE: Any replacement of spare shall be measured and paid separately under respective item of schedule 'A'.

M&L for stand flush to wall for desert cooler fabricated out of MS angle iron 40 x 40 x 6 mm , 1.2 meter long bend to shape as top size 600 x 600 mm duly welded with two members to tie vertical support , including painting two coats of synthetic enamelled paint over a coat of red oxide primer including M&L for steel rack bolt / fastner 100 mm long 12 mm dia - 4 Nos for fixing stand all as directed by Engr-in-Charge .

Supply and fix in existing location and position PTMT stop cock 15 mm dia high pressure screwed for iron pipe, complete all as specified and as directed. Make: PRAYAG/POLYTUFF

Supply and fix in existing location and position PTMT Ball valves 15 mm dia high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe, complete all as specified and as directed. Make: PRAYAG/POLYTUFF

M&L for permanent type stiker of size 150x300 mm having following details in letters not exceeding 25 mm, complete all as specified and as directed. (i) Machine Srl No_______________. (ii) MES No____________________. (iii) Date set to work_____________. (iv) PRB Page No ______________. (v) Location___________________.

M&L for wiring for circuit / sub main wiring alongwith earth wire with the following sizes of FR PVC insulated , multistranded copper conductor cable ,( 2 X 1.5 Sq mm + 1X 1.5 Sqmm ), single core drawn in and including PVC casing capping 25 mm width , to be fixed on surface/ ceiling complete all as directed by Engr-in-Charge .

Supply and replace PVC moulded box of switch socket combination of cap - 15 Amp, complete all as specified and as directed. Make : ANCHOR/ LEGRAND

Taking down copper/aluminium sub main wiring surface/ concealed complete, including fixture and fittings removing materials from site of work complete or removing materials to store for keeping in safe custody or for taking credit and making good disturbed surfaces of walls, floors, etc, complete all as specified and as directed.

M&L in repairs sub main wiring with PVC insulated and unsheathed 2 x 6 Sq mm single core multistrandred copper conductor cable passing through existing PVC / steel conduit and making good the distrurbed surface of wall incl 6 Sq mm single core copper conductor cable PVC insulated and unsheathed cable as earth wire, complete all as specified and as directed. Note :- Two runs of cable 6 Sqmm and One run of 4 Sqmm shall be measured as one unit length.

M&L in repairs sub main wiring with PVC insulated and unsheathed 2 x 6 Sq mm single core multistrandred copper conductor cable passing through in and including PVC conduit fixed on surface ISI marked and conduit accessaries fixed on surface of wall, ceiling etc, making good the distrurbed surface, incl 6 Sq mm single core copper conductor cable PVC insulated and unsheathed as earth wire, complete all as specified and as directed. Note :- Two runs of cable 6 Sqmm and One run of 4 Sqmm along with conduit shall be measured as one unit length.

M&L in repairs sub main wiring with PVC insulated and unsheathed 2 x 6 Sq mm single core multistrandred copper conductor cable passing through in and including PVC cassing-N-capping (20 to 32 mm) and making good the distrurbed surface of wall incl 6 Sq mm single core copper conductor cable PVC insulated and unsheathed cable as earth wire, complete all as specified and as directed. Note :- Two runs of cable 6 Sqmm and One run of 4 Sqmm shall be measured as one unit length.

M&L in repairs sub main wiring with PVC insulated and unsheathed 2x 6 Sq mm single core multistrandred copper conductor cable passing through in and including PVC conduit , concealing in walls (by means of chasing including making good existing surface and matching existing surface ) ISI marked and conduit accessaries fixed on surface of wall, ceiling etc, making good the distrurbed surface, incl 6 Sq mm single core copper conductor cable PVC insulated and unsheathed as earth wire, complete all as specified and as directed. Note :- Two runs of cable 6 Sqmm and One run of 4 Sqmm along with conduit shall be measured as one unit length.

M&L in repairs sub main wiring with PVC insulated and unsheathed 4 Sq mm single core multistrandred copper conductor cable passing through in and including PVC conduit fixed on surface ISI marked and conduit accessaries fixed on surface of wall, ceiling etc, making good the distrurbed surface, incl 4 Sq mm single core copper conductor cable PVC insulated and unsheathed as earth wire, complete all as specified and as directed. Note :- Two runs of cable 4 Sqmm and One run of 2.5 Sqmm along with conduit shall be measured as one unit length.

M&L in repairs sub main wiring with PVC insulated and unsheathed 4 Sq mm single core multistrandred copper conductor cable passing through in and including PVC conduit , concealing in walls ( by means of chasing including making good existing surface and matching existing surface ) ISI marked and conduit accessaries fixed on surface of wall, ceiling etc, making good the distrurbed surface, incl 4 Sq mm single core copper conductor cable PVC insulated and unsheathed as earth wire, complete all as specified and as directed. Note :- Two runs of cable 4 Sqmm and One run of 2.5 Sqmm along with conduit shall be measured as one unit length.

M&L in repairs sub main wiring with PVC insulated and unsheathed 2.5 Sq mm single core multistrandred copper conductor cable passing through in and including PVC conduit fixed on surface ISI marked and conduit accessaries fixed on surface of wall, ceiling etc, making good the distrurbed surface, incl 2.5 Sq mm single core copper conductor cable PVC insulated and unsheathed as earth wire, complete all as specified and as directed. Note :- Two runs of cable 2.5 Sqmm and One run of 2.5 Sqmm along with conduit shall be measured as unit length.

Taking down copper/aluminium point wiring surface/ concealed (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting, bell etc. removing materials from site of work complete or removing materials to store for keeping in safe custody or for taking credit and making good disturbed surfaces of walls, floors, etc, complete all as specified and as directed.

M&L for point wiring complete with using 1.5 sq mm single core multi stranded copper conductor PVC (FRLS) insulated unsheathed cable confirming to IS-694,1100 Volts grade ISI Marked( Make: Havells/polycab ) passing in and including PVC conduit fixed on PVC saddle and clamp (ISI Marked) with accessories fixed on surface of wall / roof / ceiling etc in sunken pressed steel terminal boxes in wall,including 3.00 mm thick plastic laminated hylem sheet and 1.50 sq mm PVC insulated unsheathed stranded copper conductor(FRLS) cable for common earth and connecting to earth dolly material and labour for, complete all as specified and as directed. :- (a) One light point controlled by one, one way switch

(b) One fan point controlled by one way switch.

(c) One socket outlet 3 pin 5/6 Amps on same board

(d) One socket outlet 3 pin 5/6 Amp on independent board

(e) One bell point controlled by one bell push.

(f) One light point controlled by two, two-way switches

All as per above item No 131 but with using 2.5 Sq mm single core multistanded copper conductor cable and 2.5 sq mm PVC insulated unsheathed stranded copper conductor for common earth wire for 6 pin 16 Amp socket outlet on independent board, complete all as specified and as directed. .

M&L for Point wiring complete with 1.5 sq mm single core multi stranded copper conductor PVC (FRLS) insulated unsheathed cable confirming to IS-694,1100 Volts grade ( Make: Havells,polycab) ( ISI Marked) passing in PVC cassing-N-capping 25/32 mm dia fixed on surface of wall/roof/ceiling with existing/new sunken pressed steel terminal boxes including 3.00 mm thick plastic laminated sheet top cover and 1.50 sq mm PVC insulated unsheathed stranded copper conductor(FRLS) cable for common earth and connecting to earth dolly material and labour for, complete all as specified and as directed. :- (a) One light point controlled by one, one way switch

(b) One fan point controlled by one way switch.

(c) One socket outlet 3 pin 5/6 Amps on same board

(d) One socket outlet 3 pin 5/6 Amp on independent board

(e) One bell point controlled by one bell push.

(f) One light point controlled by two, two-way switches

All as per above item No 138 but with using 2.5 Sq mm single core multistanded copper conductor cable including 2.5 sq mm PVC insulated unsheathed stranded copper conductor for common earth wire for 6 pin 16 Amp socket outlet on independent board .

M&L for concealed Point wiring complete with 1.5 sq mm single core multi stranded copper conductor PVC (FRLS) insulated unsheathed cable confirming to IS-694,1100 Volts grade ISI Marked , class V ( Make: Havells, polycab ) in concealed PVC conduit (ISI Marked) not less than 20 mm dia heavy duty with accessories etc and including sunken pressed steel terminal boxes in wall, including 1.50 sq mm PVC insulated unsheathed stranded copper conductor (FRLS) cable for common earth and connecting to earth dolly material and labour for (Note- rates of chasing/cutting & making goods shall be included in the unit rate) :- (a) One light point controlled by one-one way switch.

(b) One ceiling fan/Exhaust fan point controlled by one, one way switch through Regulator.

(c) One three pin 5/6 Amp socket on same board with other switches.

(d) One three pin 5/6 Amp socket on independent board.

(e) One bell point controlled by one bell push.

(f) One light point controlled by two, two-way switches

All as per above item No. 145 above but with 2.5 Sq.mm. (nominal area) cable for one 3 Pin 16 amp socket on independent board including one 1.5 sqmm copper conductor multi stranded green colour PVC insulated unsheathed cable 1100 volts grade as earth wire upto common earth & connected to earth dolly complete all as specified and directed by Eng.-in-charge.

S&F switch piano flush type single pole one way 6 Amp ISI Marked, complete all as specified and as directed. Make: Havells/Cona/Anchor

S&F switch piano flush type single pole one way 16 Amp ISI Marked, complete all as specified and as directed. Make: Havells/cona/Anchor

S&F socket outlet 2 in 1, 5 pin, 6 Amp flush type ISI Marked, complete all as specified and as directed. Make: Havells/cona/Anchor

S&F socket outlet 2 in 1, 6 pin, 6 and 16 amp flush type ISI Marked, complete all as specified and as directed. Make: Havells/cona/Anchor

M&L for Ceiling rose, 3 terminal/PVC/ polycarbonate, isolated body, complete all as specified and as directed. Make: Havells/Cona/Anchor

M&L for Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fitting, complete all as specified and as directed. Make:Havells/Cona/Anchor/Leader

Supply and fix socket type(2 Module) electonic fan regulator flush type ISI Marked, complete all as specified and as directed. Make: Havells/Cona/Anchor

Hanging only ceiling fan (M.D. supply) and connecting up including provision of cable from ceiling rose or connector to fan, complete all as specified and as directed.

Fixing only exhaust fan (M.D.supply) and connecting up including provision of cable from ceiling rose/connector to fan, complete all as specified and as directed.

S&F sheet metal enclosures 240 volt with suitable rated bus bar for double door IP-42 DB's suitable for one MCB SPN as incoming and 2 MCB SP as out going,SPN 4Way complete all as specified and directed by Engr-in-charge. Make :-Havells/Legrand/ Indo Asian/ABB

S&F sheet metal enclosures 240 volt with suitable rated bus bar for double door IP-43 DB's suitable for one MCB SPN as incoming and 6 MCB SP as out going SPN 8 way complete all as specified and directed by Engr-in-charge. Make :-Havells/Legrand/ Indo Asian/ABB

S&F sheet metal enclosures 415 volt TPN 4 way with 200 Amp rated bus bar, double door IP-43 DB's suitable for With one No 100 Amp 10 KA TPN MCCB as incoming complete all as specified and directed by Engr-in-charge. Make :-Havells/Legrand/ Indo Asian/ABB

Supply and Fix MCB Single pole"C" series 5-32 Amps ISI marked, complete all as specified and as directed. Make :-Havells/Legrand/ Indo Asian/ABB

Supply and Fix MCB Single pole & neutral "C" series 40 Amps ISI marked, complete all as specified and as directed. Make :-Havells/Legrand/ Indo Asian

Supply and Fix MCB Single pole & neutral "C" series 63. Amps ISI marked, complete all as specified and as directed. Make :-Havells/Legrand/ Indo Asian

Supply and fixing repair electronic driver as per sample for LED fitting up to 15watt, complete all as specified and as directed. Make Crompton/Havells/CG/Philips/Osram.

Supply and fixing repair electronic driver as per sample for LED fitting up to 36watt , complete all as specified and as directed. Make Crompton/Havells/CG/Philips/Osram.

Supply and fixing in repair MCCB 100 amp TPN, 415 volts 16 KA rupturing capacity including proper thimbles, fixing on DB'S, complete all as specified and as directed.

Supply and fixing in repair MCB SP C Curve 5-32 Amps, complete all as specified and as directed. Make: Legrand /Havells/ABB/Indo Asian

Supply and fixing in repair MCB SPN C Curve upto 40 amp Amps, complete all as specified and as directed. Make: Legrand /Havells/ABB/Indo Asian

Supply and fixing in repair MCB SPN C Curve 63 Amps, complete all as specified and as directed. Make: Legrand /Havells/ABB/Indo Asian

Supply and fixing in repair MCB TPN C Curve 63 Amps, complete all as specified and as directed. Make: Legrand /Havells/ABB/Indo Asian

Fixing LED batten fittings 20/22 watt, ,branded make such as Havells/Surya/ Phillips/Bajaj etc.including 1Nos tube rod complete with all accessories, complete all as specified and as directed.

Supply and laying or fixing or passing through pipe,1100 volts grade heavy duty cable with PVC insulated aluminium solid stranded conductor served with an inner sheathing of PVC tape and overall pvc sheathed 10sq mm nominal cross sectional area, complete all as specified and as directed.

Supply and laying or fixing or passing through pipe,1100 volts grade heavy duty cable with PVC insulated aluminium solid stranded conductor served with an inner sheathing of PVC tape and overall pvc sheathed 16 sq mm nominal cross sectional area, complete all as specified and as directed.

Supply and fixing repair PVC insulated and unsheathed FRLS single core multistranded copper conductor for repair, in existing conduit of size 1.5 sqmm as in replacement of any defective/burnt circuit, complete all as specified and as directed.

Supply and fixing repair PVC insulated and unsheathed FRLS single core multistranded copper conductor for repair, in existing conduit of size 2.5 sqmm as in replacement of any defective/burnt circuit, complete all as specified and as directed.

Supply and fixing repair PVC insulated and unsheathed FRLS single core multistranded copper conductor for repair, in existing conduit of size 4.0 sqmm as in replacement of any defective/burnt circuit, complete all as specified and as directed.

Supply and fixing repair PVC insulated and unsheathed FRLS single core multistranded copper conductor for repair, in existing conduit of size 6.0 sqmm as in replacement of any defective/burnt circuit, complete all as specified and as directed.

S&F Street light bracket made out of medium grade GI Pipe, bent to shape including GI Clamps nut,bolts washers,reducer of required size for suitable any type fittings etc complete including necessary painting all as specified and directed by Engr-in Charge.

Earthing complete with galvanised steel earth plate electrode 60 x x60cm x 6 mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) wih top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in elevtrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion . Note : Rates are deemed to be included for necessary earth work , earth pit with RCC cover of size 300X300 x25 mm etc, complete all as specified and as directed.

S&F LED bulk head light10 watt complete with all accessories pre wired and including connecting up to fiting with flexible cable of suitable size, complete all as specified and as directed. Make: Crompton/ Havells/Phillips/Bajaj/ CG/ Jaquar

S&F LED tube road upto 22 watt incl connection complete all as specified and directed, complete all as specified and as directed. Make: CG/ Havells

Repair, rewinding of submersible pump monoblock type of capacity upto 3 HP, single or three phase, any make incl connection, testing, complete all as specified and as directed.

Repair, rewinding of submersible pump monoblock type of capacity upto 7.5 HP, single or three phase, any make incl connection, testing, complete all as specified and as directed.

S&F in repair spare parts of submersible pump monoblock type of capacity upto 7.5 HP (i.e Water pump lock, thread cap, motor fan, pump tube pipe, wire assembly cap, pump valve assembly, plastic pump handle and capacitor cover) incl connection, testing, complete all as specified and as directed.

S&F in repair direct on line submersible pump stater of capacity 5 HP, 3 Phase, 415 Volt, with and incl connection, testing, complete all as specified and as directed. Make Kirloskar/ crompton

S&F Decorative wall light made up of high grade engineering plastic material suitable for 9 W LED lamp cap part, complete all as specified and as directed. Make: Havells -LHFOFWE1TZ1W012 or equivalent in CG/bajaj

Note for all above items:-All items in BOQ are for"Materials and labour /Supply and fix" and to be executed in "Repairs i.e incl takng down old items" unless otherwise specifically mentioned as "Supply only" or "fixing only" in BOQ. Contractors are required to quote their rates accordingly.

vijay enterprises