REPAIR AND MAINTENANCE OF VARIOUS SUBMERSIBLE PUMPS, CENTRIFUGAL PUMPS VARIOUS TYPE OF CHLORINE DOZERS ALONGWITH MISC ITEMS AT AF STATION, BAREILLY

Amount

M&L for taking out submersible pumping set 41 HP capacity of any make from bore well (60m deep) connected with 7/6 stage column pipe; and transporting the same to civil work shop, dismantling of pump and motor and checking out all electrical and mechanical parts for identification of fault / defective parts etc. re-assembling the pump motor set after carrying out necessary repairs, transporting back to original location and installed complete at site including necessary electrical and water connections testing & commissioning complete all as specified and as directed. Note: - Repairs/ replacement of various parts of pump; rewinding of motor etc. shall be measured & paid separately based on fault / test report and as directed by Engineer- in- Charge

Description all as per srl item No. 1 here-in-before but pumping set of 25 HP Capacity complete all as specified and as directed.

Description all as per srl item No. 1 here-in-before but pumping set of 10 HP / 12.5 HP capacity complete all as specified and as directed.

M&L for taking out submersible pumping set 0.5/ 2 HP capacity of any make from bore well (30m deep) connected with 3 stage column pipe; and transporting the same to civil work shop, dismantling of pump and motor and checking out all electrical and mechanical parts for identification of fault / defective parts etc. re-assembling the pump motor set after carrying out necessary repairs, transporting back to original location and installed complete at site including necessary electrical and water connections testing & commissioning complete all as specified and as directed. Note: - Repairs/ replacement of various parts of pump; rewinding of motor etc. shall be measured & paid separately based on fault / test report and as directed by Engineer- in- Charge.

Supply & replace SS impeller suitable for submersible pump set 41 HP capacity of any make complete all as specified and as directed.

Description all as per srl item No. 5 here-in-before but for submersible pump set of 25 HP capacity complete all as specified and as directed.

Description all as per srl item No.5 here-in-before but for submersible pump set of 10/ 12.5 HP capacity complete all as specified and as directed.

Description all as per srl item No.5 here-in-before but for submersible pump set of 0.5/ 2.0 HP capacity complete all as specified and as directed.

Supply & replace Coupling sleeve SS suitable for submersible pump set 41 HP capacity of any make complete all as specified and as directed.

Description all as per srl item No. 9 here-in-before but for submersible pump set of 25 HP capacity complete all as specified and as directed.

Description all as per srl item No. 9 here-in-before but for submersible pump set of 10 / 12.5 HP capacity complete all as specified and as directed.

Description all as per srl item No. 9 here-in-before but for submersible pump set of 0.5 / 2.0 HP capacity complete all as specified and as directed.

Supply & replace SS stud with nut suitable for submersible pump set 41 HP capacity of any make complete all as specified and as directed.

Description all as per srl item No. 13.00 here-in-before but for submersible pump set of 25 HP capacity complete all as specified and as directed.

Description all as per srl item No. 13.00 here-in-before but for submersible pump set of 10 / 12.5 HP capacity complete all as specified and as directed.

Description all as per srl item No. 13.00 here-in-before but for submersible pump set of 0.5 / 2.0 HP capacity complete all as specified and as directed.

Supply & replace Thrust plate with bearing suitable for submersible pump set 41 HP capacity of any make complete all as specified and as directed.

Description all as per Item No. 17.00 here-in-before but for submersible pump set of 25 HP capacity complete all as specified and as directed.

Description all as per srl item No. 17.00 here-in-before but for submersible pump set of 10 / 12.5 HP capacity complete all as specified and as directed.

Description all as per srl item No. 17.00 here-in-before but for submersible pump set of 0.5 / 2.0 HP capacity complete all as specified and as directed.

Supply & replace Bush GM suitable for submersible pump set 41 HP capacity of any make complete all as specified and as directed.

Description all as per srl item No. 21 here-in-before but for submersible pump set of 25 HP capacity complete all as specified and as directed.

Description all as per srl item No. 21 here-in-before but for submersible pump set of 10 / 12.5 HP capacity complete all as specified and as directed.

Description all as per srl item No. 21 here-in-before but for submersible pump set of 0.5 / 2.0 HP capacity complete all as specified and as directed.

Supply & replace Bush Rubber suitable for submersible pump set 41 HP capacity of any make complete all as specified and as directed.

Description all as per srl item No. 25 here-in-before but for submersible pump set of 25 HP capacity complete all as specified and as directed.

Description all as per srl item No. 25 here-in-before but for submersible pump set of 10 / 12.5 HP capacity complete all as specified and as directed.

Description all as per srl item No. 25 here-in-before but for submersible pump set of 0.5 / 2.0 HP capacity complete all as specified and as directed.

Supply & replace GM neck ring suitable for submersible pump set 41 HP capacity of any make complete all as specified and as directed.

Description all as per srl item No. 29.00 here-in-before but for submersible pump set of 25 HP capacity complete all as specified and as directed.

Description all as per srl item No. 29.00 here-in-before but for submersible pump set of 10 / 12.5 HP capacity complete all as specified and as directed.

M&L for rewinding of submersible Motor set 41 HP capacity of any make by taking out rotor, taking out burnt stator winding, cleaning the stator and rewinding the motor with appropriate gauge, weight and turns of super enameled copper wire using proper insulating material, varnishing with Class-I varnish, heating/ baking etc complete all as specified and directed by Engineer-in-Charge.

Description all as per srl item No. 32 here-in-before but for submersible pump set of 25 HP capacity complete all as specified and as directed.

Description all as per srl item No. 32 here-in-before but for submersible pump set of 10 / 12.5 HP capacity complete all as specified and as directed.

Description all as per srl item No. 32 here-in-before but for submersible pump set of 0.5 / 2.0 HP capacity complete all as specified and as directed.

Disconnecting the suction & delivery lines of the Centrifugal/ mono-block pump set of 0.5/3 HP capacity including pulley, coupling connected to the motor and removing of the pump, opening the pump, overhauling of the pump, machining, threading, tapping etc. including replacement of defective/worn out spares, packing kit, greasing, re-assembling, coupling with motor, refixing back in to the original position, reconnecting back the suction, delivery lines, realigning and testing complete all as directed by Engineer-in-charge: Note :- (i) Spares require replacement shall be measured and paid separately. (ii) Rate quoted deemed to be included for all minor spares, packing kit, gland rope, bolts, nuts, lubricants etc.

M&L for rewinding of Centrifugal/ mono-block motor set 0.5/3 HP capacity of any make by taking out rotor, taking out burnt stator winding, cleaning the stator and rewinding the motor with appropriate gauge, weight and turns of super enameled copper wire using proper insulating material, varnishing with Class-I varnish, heating/ baking etc complete all as specified and directed by Engineer-in-Charge.

Supply & replace Pump shaft MS suitable for 0.5/3 HP centrifugal pump set complete all as specified and as directed.

Supply & replace Guide spinner complete with bush suitable for 0.5/3 HP centrifugal pump set complete all as specified and directed

Supply & replace Gland bush suitable for 0.5/3 HP centrifugal pump set complete all as specified and directed.

Supply & replace CI impeller suitable for 0.5/3 HP centrifugal pump set complete all as specified and directed.

Supply & replace Coupling set suitable for 0.5/3 HP centrifugal pump set complete all as specified and directed.

Supply & replace Roller bearing and Ball bearing suitable for 0.5/3 HP centrifugal pump set complete all as specified and directed.

Supply & replace mechanical seal magnate suitable for 0.5/3 HP centrifugal pump set complete all as specified and directed.

Supply only Orthotodoline solution 500 ml complete all as specified and directed.

M&L for carrying out repairs to unserviceable Altoch based dozing pump including replacement of unserviceable parts and testing and commissioning complete all as specified and as directed. Note: Spares required and replacement shall be measured & paid separately.

Supply & replace PVC Dosing head assembly with suction and delivery adopter with NRV for 25 LPS complete all as specified and as directed.

Supply & replace PVC NRV set with glass ball for suction and delivery adopter complete all as specified and as directed.

Supply & replace PVC Adopter for suction and delivery with out NRV complete all as specified and as directed.

Supply & replace PVC Strainer washer type heavy duty or Y type strainer for suction complete all as specified and as directed.

Supply & replace Teflon gland square type 3mm complete all as specified and as directed.

Supply & replace Chemical oil seal with cap complete all as specified and as directed.

Supply & replace Dosing agitator gear box 25 LPS complete all as specified and as directed.

Supply & replace Plunger assembly with out PVC dosing head complete all as specified and as directed.

Supply & replace Plunger assembly with PVC casing head complete all as specified and as directed.

Supply & replace Heavy duty FRP Tank capacity 150 Ltr complete all as specified and as directed.

Supply only chlorine test kit with coloured ample complete with all testing filament and OT solution in rexine box complete all as specified and as directed.

Supply and lowering of M.S column pipes heavy duty 100mm dia bore, 3.00m long each pipe with threaded ends, fixed with two Nos M.S flange on both end, including welding (both inside and outside) and drilling holes on flanges as per existing size/ grinding etc. complete all as specified and as directed. [Make: Jindal/ Tata/ Sail].

Taking out existing unserviceable/ broken / damaged CI Butter fly valve from its existing position and Supply & fixing CI Butterfly 200mm dia valve stainless steel spindle, CI body ISI marked both end flanged and drilled and fixed by means of new nuts, bolts and washer including providing rubber gasket of suitable thickness complete all as specified and as directed.

Taking out existing unserviceable/ broken / damaged CI Butter fly valve from its existing position and Supply & fixing CI Butterfly 150mm dia valve stainless steel spindle, CI body ISI marked both end flanged and drilled and fixed by means of new nuts, bolts and washer including providing rubber gasket of suitable thickness complete all as specified and as directed.

Taking out existing unserviceable/ broken / damaged CI Butter fly valve from its existing position and Supply & fixing CI Butterfly 100mm dia valve stainless steel spindle, CI body ISI marked both end flanged and drilled and fixed by means of new nuts, bolts and washer including providing rubber gasket of suitable thickness complete all as specified and as directed.

M&L for non return valve 200mm dia with flanged end heavy duty gun metal working parts ISI marked drilled for bolts including necessary rubber gasket, nuts, bolts, washers with and including taking out existing old unserviceable/ broken / damaged CI non return valve with cutting the rusted bolts, nuts with rubber sheet complete all as specified and as directed.

M&L for non return valve 150mm dia with flanged end heavy duty gun metal working parts ISI marked drilled for bolts including necessary rubber gasket, nuts, bolts, washers with and including taking out existing old unserviceable/ broken / damaged CI non return valve with cutting the rusted bolts, nuts with rubber sheet complete all as specified and as directed.

Collection of water sample from the bore well for testing of Physical, Bacteriological and chemical analysis of potability for drinking purpose from Govt/Authorized lab complete all as specified and as directed.

S&F Direct on line starter (3-10 Amps Relay Range) suitable for submersible pump sets up to 2 HP, 415 Volt, 3 phase in the LT Panel board with suitable size of copper lugs/wire with and including taking out old unserviceable/ burnt DOL starter including 3 phase electrical connection, complete all as specified and as directed. [Cat No MU-G20 SS95984 of Make: L&T or equivalent in Siemens/ BCH].

Taking out unserviceable/ burnt DOL starter including single phase electrical connection, supply & fixing Direct on line starter (3-10 Amps Relay Range) suitable for submersible pump sets up to 2 HP, 415 Volt, 3 phase in the LT Panel board with suitable size of copper lugs/wire complete all as directed & specified. [Cat No MU-G20 SS95984 of Make: L&T or equivalent in Siemens/ BCH].

S&F power contactor MNX 9 type 415 volts heavy duty, 3 phase, suitable for star delta starter in the LT Panel board with suitable size of copper wire including taking down old unserviceable contactor complete all as specified and as directed. [Make: L&T Cat No SS90721 or equivalent in Schneider/ Siemens]

S&F Contactor TP MNX 70 including coil 230 volt complete all as specified and as directed.

S&F Contactor TP MNX 40 including coil 230 volt complete all as specified and as directed.

S&F Contactor TP MNX 25 including coil 230 volt complete all as specified and as directed.

Supply and fixing electronic timer type ET-100, 110/240 Volt, 50 Hz complete all as specified and directed.

Supply and fixing O/L relay 45 to 75 Amps 3 pole, directly operated complete all as specified and as directed.

Supply and fixing O/L relay 30 to 45 Amps 3 pole, directly operated complete all as specified and as directed.

Supply and fixing O/L relay 20 to 35 Amps 3 pole, directly operated complete all as specified and as directed.

S&F in repairs push button unit for Star delta starter complete all as directed. Make: L&T Cat No-SS90004 or equivalent in Siemens/ Schneider.

Supply and replacement and testing of single phase preventer, 415 Volt AC, 50 Hz including replacement of internal copper wire connections for starter of suitable size complete all as specified and as directed.

S&F MCCB (fixed type) 415 volt, 3 pole, 30 kA, 63 Amps capacity complete all as specified and as directed.

S&F MCCB (fixed type) 415 volt, 3 pole, 30 kA, 125 Amps capacity complete all as specified and as directed.

S&F submersible copper cable flat type three core of size 16sqmm complete all as directed & specified.

S&F submersible copper cable flat type three core of size 10sqmm complete all as directed & specified.

S&F submersible copper cable flat type three core of size 6sqmm complete all as directed & specified.

S&F submersible copper cable flat type three core of size 2.5sqmm complete all as directed & specified.

S&F in repairs LED phase indicator R Y B colours complete with wiring all as specified and as directed.

M&L for preparation of new or previously untreated steel surfaces over 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of zinc chrome primer complete all as specified and as directed.

M&L for preparation of new or previously untreated steel surfaces over 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of zinc chrome primer as per colour code on overhead tank pipes at a height of 18 mtr complete all as specified and as directed.

SHRI SIDHI VINAYAK INFRASTRUCTURE DEVELOPERS

SONI ENTERPRISES