Construction of Govt. Senior Secondary School building Soldha

Amount

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m (One point five metre) in width or 10 sqm (Ten square metre) on plan, including dressing of sides and ramming of bottoms, lift upto 1.5 m (One point five metre), including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. (Fifteen metre), as per direction of the Engineer-in-Chrge, including carriage of materials within all leads and lifts and other incidental charges. The rate includes of malkana, royality, octroi, toll tax, GST or all other taxes as imposed by the Government.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering all works up tp plinth lavel 1:5:10 (One cement : five sand : ten graded/ crushed stone aggregate 40mm (Forty millimetres) nominal size mixed mechanically and curing complete excluding the cost of form work in foundation and plinth in all depths, as per direction of the Engineer-in-Chrge, including carriage of materials within all leads and lifts and other incidental charges. The rate includes of malkana, royality, octroi, toll tax, GST or all other taxes as imposed by the Government.

Random rubble masonry/polygonal rubble masonry uncoursed/ brought to courses with hard stone of approved quality in foundation and plinth including leveling up with cement concrete 1:6:12 (One cement : six sand : twelve graded stone aggregate 20mm (Twenty millimetre) nominal size) at plinth level in cement mortar 1:6 (One cement : six sand) and curing complete, as per direction of the Engineer-in-Chrge, including carriage of materials within all leads and lifts and other incidental charges. The rate includes of malkana, royality, octroi, toll tax, GST or all other taxes as imposed by the Government.

Brick work using second class common burnt F.P.S. (non modular) clay building bricks of class designation 7.5 in supersturcture above plinth level upto floor V level in all shapes and sizes in cement mortar 1:6 (One cement : six course sand) including curing complete, as per direction of the Engineer-in-Chrge, including carriage of materials within all leads and lifts and other incidental charges. The rate includes of malkana, royality, octroi, toll tax, GST or all other taxes as imposed by the Government.

Providing and fixing angle iron frames for doors, windows and ventilators of mild steel angle section 35x35x5mm (Thirty five into thirty five into five millimetres) thickness including hinges, jamb, lock jamb, beed and if required angle thrashold of mild steel angle 35x35mm (Thirty five into thirty five millimetres) welded or 35x5mm (Thirty five into five millimetres) flat pieces to the wall with dash fastener, rigidly fixed by mechanical means, lugs with split end tails to each jamb including steel butt hinges 2.5mm (Two point five millimetres) thick with provision for locking arrangement and shock absorber as specified and applying a coat of approved steel primer after pretreatment of the surface as directed by Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, sale tax, GST, malkana and all other taxes as imposed by the Government.

Providing and fixing pressed steel doors frames conforming to No.IS:4351 1.60mm (One point six zero millimetres) thickness, including hings, jamp, lock jamp, bead and if required angle threshold of mild steel angle of saction 50x25mm (Fifty into twenty five) millimetres, or base ties of 1.60 mm (One point sixty millimetres) pressed mid steel welded or rigidly fixed together by mechenical means, including M.S. butt hinges 2.5mm (Two point five millimetres) thick with mortar guards, lock strikeplate and shok absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface complete, as per direction of the Engineer-in-Chrge, including carriage of materials within all leads and lifts and other incidental charges. The rate includes of malkana, royality, octroi, toll tax, GST or all other taxes as imposed by the Government.

Centering and shuttering including strutting, propping etc. and removal of form for : Lintels, beams, plinth beams, girders, bressumers and cantilevers as per direction of the Engineer-in-Chrge, including carriage of materials within all leads and lifts and other incidental charges. The rate includes of malkana, royality, octroi, toll tax, GST or all other taxes as imposed by the Government.

Centering and shuttering including strutting, propping etc. and removal of form for : Suspended floors, roofs, landings, balconies and access platform as per direction of the Engineer-in-Chrge, including carriage of materials within all leads and lifts and other incidental charges. The rate includes of malkana, royality, octroi, toll tax, GST or all other taxes as imposed by the Government.

Centering and shuttering including strutting, propping etc. and removal of form for : Stairs, (excluding landings) except spiralstaircases including carriage of materials, within all leads, lifts of materials and other incidental Charges. The rate includes, royality charges, octroi, sale tax, malkana and all other taxes as imposed by the Government.

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° (Fifteen degree) landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse : 3 graded) stone aggregate 20 mm (Twenty millimetres) nominal size. ias per direction of the Engineer-in-Chrge, including carriage of materials within all leads and lifts and other incidental charges. The rate includes of malkana, royality, octroi, toll tax, GST or all other taxes as imposed by the Government.

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth leve Mild steel and Medium Tensile steel bars complete,as per direction of the Engineer-in-Chrge, including carriage of materials within all leads and lifts and other incidental charges. The rate includes of malkana, royality, octroi, toll tax, GST or all other taxes as imposed by the Government.

6mm (Six millimetres) thick cement plaster to ceiling with cenentmonar 1.3 (One cement three (sand) plo all floors level complete, as per direction of the Engineer-in-Chrge, including carriage of materials within all leads and lifts and other incidental charges. The rate includes of malkana, royality, octroi, toll tax, GST or all other taxes as imposed by the Government.

20mm (Fifteen millimetres) thick cement plaster with cement mortar 1:6 (One cement: six sand) in single coat on the rough side of brick concrete/stone walls for interior plastering upto all floor level. including atrises internal rounded angles, chamfers and/or rounded angle in all girth and finished even and smooth complete, as per direction of the Engineer-in-Chrge, including carriage of materials within all leads and lifts and other incidental charges. The rate includes of malkana, royality, octroi, toll tax, GST or all other taxes as imposed by the Government.

15mm (Fifteen millimetres) thick cement plaster with cement mortar 1:6 (One cement: six sand) in single coat on the fair side of brick concrete/stone walls for interior plastering upto all floor level. including atrises internal rounded angles, chamfers and/or rounded angle in all girth and finished even and smooth complete, as per direction of the Engineer-in-Chrge, including carriage of materials within all leads and lifts and other incidental charges. The rate includes of malkana, royality, octroi, toll tax, GST or all other taxes as imposed by the Government.

Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 35 mm (Thirty five millimetres) thick including ISI marked Stainless Steel butt hinges with necessary screws. as per direction of the Engineer-in-Chrge, including carriage of materials within all leads and lifts and other incidental charges. The rate includes of malkana, royality, octroi, toll tax, GST or all other taxes as imposed by the Government.

Providing and fixing wire gauge shutters using galvanized M.S. wire gauge of average width of aperture 1.4 mm (One point four millimetres) in both directions with wire of dia 0.63 mm (Zero point six three millimetres), for doors, windows and clerestory windows with hinges and necessary screws : 35 mm (Thirty five millimetres) thick shutters with ISI marked M.S. pressed butt hinges bright finished of required size Kiln seasoned and chemically treated hollock wood, ias per direction of the Engineer-in-Chrge, including carriage of materials within all leads and lifts and other incidental charges. The rate includes of malkana, royality, octroi, toll tax, GST or all other taxes as imposed by the Government.

Fixing standard steel glazed doors, windows and ventilators in walls, including fixing of float glass panes with glazing clips and special metal- sash putty of approved make, or metal beading with screws, (only steel windows, glass panes cut to size and glazing clips or metal beading with screws, shall be supplied by department free of cost. Fixing with 15x3 mm (Fifteen into three) lugs 10 cm (Ten centimeters) long embedded in cement concrete block 15x10x10 cm (Fifteen into ten into ten centimeters) of Cement concrete. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) including carriage of materials within all leads, lifts and other ental Charges The rate includes, royality charges, octroi, sale tax, GST, malkana and all other taxes as impose ay the Government.

Providing and fixing fly proof wire guage windows, clerestory windows & doors with M.S. Flat 15x3 mm (Fifteen into three millimetres) and nuts & bolts complete. Galvanised M.S. Wire gauze with 0.63 mm (Zero point six three millimetres) dia wire and 1.4 mm (One point four millimetres) aperture on both sides, as per direction of the Engineer-in-Chrge, including carriage of materials within all leads and lifts and other incidental charges. The rate includes of malkana, royality, octroi, toll tax, GST or all other taxes as imposed by the Government.

Providing and applying white cement based putty of average thickness 1 mm (One millimetres), of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.as per direction of the Engineer-in-Chrge, including carriage of materials within all leads and lifts and other incidental charges. The rate includes of malkana, royality, octroi, toll tax, GST or all other taxes as imposed by the Government.

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% (Zero point zero eight percent) and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm (Twenty millimetres) thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm (Three point three kilo grames) including grouting the joints with white cement and matching pigments etc., complete Size of Tile 600 x 600 mm (Six hundred into six hundred), as per direction of the Engineer-in-Chrge, including carriage of materials within all leads and lifts and other incidental charges. The rate includes of malkana, royality, octroi, toll tax, GST or all other taxes as imposed by the Government.

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade New work (two or more coats) over and including water thinnable priming coat with cement primer, as per direction of the Engineer-in-Chrge, including carriage of materials within all leads and lifts and other incidental charges. The rate includes of malkana, royality, octroi, toll tax, GST or all other taxes as imposed by the Government.

Finishing walls with water proofing cement paint of required shade : New work (Two or more coats applied @ 3.84 kg/10 sqm (Three point eigh four kilo grames/ten square metre) as per direction of the Engineer-in-Chrge, including carriage of materials within all leads and lifts and other incidental charges. The rate includes of malkana, royality, octroi, toll tax, GST or all other taxes as imposed by the Government.

Applying priming coat: With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood), ias per direction of the Engineer-in-Chrge, including carriage of materials within all leads and lifts and other incidental charges. The rate includes of malkana, royality, octroi, toll tax, GST or all other taxes as imposed by the Government.

Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications : Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied at the rate of 0.90 ltr/10 sqm (Zero point nine zero liters obleque ten square metre) over an under coat of primer applied at the rate of 0.75 ltr/10 sqm (Zero point seven five liters obleque ten square metres) of approved brand and manufacture, as per direction of the Engineer-in-Chrge, including carriage of materials within all leads and lifts and other incidental charges. The rate includes of malkana, royality, octroi, toll tax, GST or all other taxes as imposed by the Government.

Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications : Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied at the rate of 0.90 ltr/ 10 sqm (Zero point nine zero liters obleque ten square metres) over an under coat of primer applied at the rate of 0.80 ltr/ 10 sqm (Zero point eigh zero liters obleque ten square metres) of approved brand and manufacture as per direction of the Engineer-in-Chrge, including carriage of materials within all leads and lifts and other incidental charges. The rate includes of malkana, royality, octroi, toll tax, GST or all other taxes as imposed by the Government.

Providing and fixing M.S. (Mild steel) grills of required pattern in frames of windows etc. with M.S.(Mild steel) flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding. as per direction of the Engineer-in-Chrge, including carriage of materials within all leads and lifts and other incidental charges. The rate includes of malkana, royality, octroi, toll tax, GST or all other taxes as imposed by the Government.

Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etcetera as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works, as per direction of the Engineer-in-Chrge, including carriage of materials within all leads and lifts and other incidental charges. The rate includes of malkana, royality, octroi, toll tax, GST or all other taxes as imposed by the Government.

Providing and fixing ISI marked oxidised M.S. (Mild steel) tower bolt black finish, (Barrel type) with necessary screws etc. complete : 150x10 mm (One hundred fifty into ten millimetres) as per direction of the Engineer-in-Chrge, including carriage of materials within all leads and lifts and other incidental charges. The rate includes of malkana, royality, octroi, toll tax, GST or all other taxes as imposed by the Government.

Providing and fixing ISI marked oxidised M.S. 9Mild steel) handles conforming to IS:4992 with necessary screws etc. complete : 125 mm (One hundred twenty five millimetres) as per direction of the Engineer-in-Chrge, including carriage of materials within all leads and lifts and other incidental charges. The rate includes of malkana, royality, octroi, toll tax, GST or all other taxes as imposed by the Government.

Providing and fixing bright finished brass hard drawn hooks and eyes : 200 mm (Two hundred millimetres) as per direction of the Engineer-in-Chrge, including carriage of materials within all leads and lifts and other incidental charges. The rate includes of malkana, royality, octroi, toll tax, GST or all other taxes as imposed by the Government.

Providing and fixing ISI marked oxidised M.S. single acting spring hinges with necessary screws etc. complete : 150 mm (One hundred fifty millimetre) ias per direction of the Engineer-in-Chrge, including carriage of materials within all leads and lifts and other incidental charges. The rate includes of malkana, royality, octroi, toll tax, GST or all other taxes as imposed by the Government.

Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 (ten) as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : 250x16 mm (Two hundred fifty into sixteen millimetres) as per direction of the Engineer-in-Chrge, including carriage of materials within all leads and lifts and other incidental charges. The rate includes of malkana, royality, octroi, toll tax, GST or all other taxes as imposed by the Government.

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 (ten) as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : 150x10 mm (Two hundred fifty into ten millimetres) as per direction of the Engineer-in-Chrge, including carriage of materials within all leads and lifts and other incidental charges. The rate includes of malkana, royality, octroi, toll tax, GST or all other taxes as imposed by the Government.

Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 (ten) as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : 125 mm (One hundred twenty five millimetres) as per direction of the Engineer-in-Chrge, including carriage of materials within all leads and lifts and other incidental charges. The rate includes of malkana, royality, octroi, toll tax, GST or all other taxes as imposed by the Government.

BHUPINDER SINGH