Preventive / Corrective maintenance to Snow Clearance Machine No. 34 (Ashok Leyland BS-III) pertaining to Mechanical and Hospital Sub Division 1st Baramulla

Preventive maintenance by way of carrying out following jobs: 1.Providing & Filling of M-Oil 15W40 (15 Ltrs@380/ltr) = 5700 2.Providing and filling of Gear Oil 75W 90 (5 Ltrs@600/ltr) = 3000 3.Providing and filling of Hydraulic Oil (10W) (5 Ltrs@400/ltr) = 2000 4.Providing and filling of Coolant (Antifreeze) (5 Ltrs@350/ltr) = 1750 5.Providing and filling of TQ Oil (2 Ltrs@450/ltr) = 900 6.Providing & Fitting of M-oil Filter (01 Set@ 1650) = 1650 7.Providing & Fitting of Diesel Filter (01 Set @1850) = 1850 8.Providing & Fitting of Air Filter assy (01 Set@2900) =2900

P / F of side view mirrors on both sides of the machine, complete with mounting base, brackets and all necessary fittings as per sample, complete in all respects.

Repairs to Electrical System by way Providing and fitting of Fog Light (04 No.), headlight Assy (01 No.) Wiper arm with blade (02 Set), Beacon Light Revolving with Siren (01 Assy), Replacement of damaged fuses, starting relay (01 No.) switches and defective wiring with suitable-size wiring as per requirement, complete in all respects.

Four-wheel checking by way of dismantling old damaged parts and then providing fitting of new following spares one complete job: - 1.OIL SEAL= 4 No's 2.BRAKE LINING SET Front & Rear = 2 Set 3.TIE ROD END SET = 2 Set 4.DRAG LINK END SET= 2 Set 5.HUB BOLTS = 6 Nos 6.SHAFT BOLTS = 6 Nos 7.WHEEL BEARING INNER=2 No's 8.WHEEL BEARING OUTER = 2 No's 9.UJ CROSS = 2 No's

Repairs to the Electro-Hydraulic Circuitry of Variable Belhack Snow Plough by way of identifying faults using electrical connectivity tests from pack to two row male connector, from Two row female connector to hydraulic motor, testing of different solenoid operator directional and pressure control valves, replacement of short-circuited wiring and replacement of faulty thermal overload relays (24Volt) 02Nos.in order to ensure all movement of the plough are restored.

Repairs to transmission System of the Vehicle by way of dismantling the transmission from the engine and removing the old damaged items and then p/f of following new items given below:-( all parts must be supplied by authorized dealer): - 1.P/f of Clutch Plate as per sample = 1 No. 2.P/f of Pressure Plate Comp. Asly as per sample = 1No 3.P/f of Clutch Release Bearing as per sample = 1No

Providing of 50 Ltr HSD @96.14/ltr = 4807 for Testing of machine and general checkup after completion of Job.