REPAIR/REPLACEMENT AND MAINTENANCE OF MISC E/M EQUIPMENTS INCLUDING BUILDING SECURITY LIGHTS WITH FITTINGS/FIXTURES AND ALLIED WORK OF E/M INCLUDING ACS, DEEP FREEZER, REFRIGERATOR, CEILING FANS, EXHAUST FANS ETC AT INHS KALYANI AND DOLPHIN HILL AND

Amount

Taking down unserviceable main switches, DBs, bus bars chambers, MCCB Enclosures any capacity including all fittings and fixtures such as MCBs, isolator, MCCBs etc and removing from site complete all as specified and directed.

Taking down unserviceable sub-main wiring (any numbers of cable) with rigid PVC/steel conduits/PVC casing-caping including cutting chases for conduits and making good disturbed surfaces complete all as specified and directed.

M & L for Sub main wiring with 4 runs of Single core 6 sqmm [ for Phase & Neutral ] PVC insulated multi stranded FRLS (ISI marked) copper cable drawn through and including surface PVC conduit of suitable size with all conduit accesories and fittings along with one run of single core 6 sqmm PVC insulated multi stranded FRLS (ISI marked) copper cable as earth continuity conductor complete all as specified and as directed. (Note :- Four runs of 6 sqmm and one runs of 6 sqmm cable as earth wire and one run of conduit shall be measured as one length)

M & L for Sub main wiring with 4 runs of Single core 10 sqmm [ for Phase & Neutral ] PVC insulated multi stranded FRLS (ISI marked) copper cable drawn through and including surface PVC conduit of suitable size with all conduit accesories and fittings along with one run of single core 10 sqmm PVC insulated multi stranded FRLS (ISI marked) copper cable as earth continuity conductor complete all as specified and as directed. (Note :- Four runs of 10 sqmm and one runs of 10 sqmm cable as earth wire and one run of conduit shall be measured as one length)

S & F Single phase sheet metal enclosure with socket plug top and MCBs having single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB of capacity 25Amp 240V, C-curve complete all as specified and as directed. (Make: Havell's Cat No. DHDMCSN0251025 or equivelant of make as per List of Manufacturer's)

S & F Single phase sheet metal enclosure with socket plug top and MCBs having single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB of capacity 20Amp 240V, C-curve complete all as specified and as directed. (Make: Havell's Cat No. DHDMCSN0251020 or equivelant of make as per List of Manufacturer's)

S & F sheet metal enclosure with socket plug top and MCBs having Triple pole and neutral enclosure with a four pin and earth plug and socket complete with one TPN MCB of capacity 32Amp 415V, C-curve complete all as specified and as directed. (Make: Havell's Cat No. DHDPBTN032 or equivelant of make as per List of Manufacturer's)

Supply, fixing, commissioning and testing in repair MCB, TPN 40-63 Amps, 415 Volts, 10KA, C Curve complete all as specified and as directed (Make : Havell's Cat part No. DHMGCTNF040 to 63 or equivelant of make as perList of manufacturer's)

Supply, fixing, commissioning and testing in repair MCB TP, 40-63 Amps, 415 Volts, 10KA, C curve complete all as specified and as directed (Make : Havell's Cat part No. HMGCTPF040 to 63 or equivelant of make as perList of manufacturer's)

S & F Vertical TPN DB double door for provision for four pole MCCB upto 160 A incommer 6 way 18 outgoing with IP 43 protectioncomplete all as specified and as directed. (Make : Legrand cat part No. 5077 46 or equivelant of make as per List of manufacturer's)

S & F Vertical TPN DB double door for provision for four pole MCCB upto 160 A incommer 4 way 12 outgoing with IP 43 protectioncomplete all as specified and as directed. (Make : Legrand cat part No. 5077 45 or equivelant of make as per List of manufacturer's)

S & F MCCB 415 Volt, 25 KA, 4 Pole, 100 Amps Capacity complete all as specified and as directed. (Make: Legrand Cat Part No. 4200 55 or equivelant of make as per List of Manufacturer's)

S & F MCCB 415 Volt, 25 KA, 4 Pole, 125 Amps Capacity complete all as specified and as directed. (Make: Legrand Cat Part No. 4200 56 or equivelant of make as per List of Manufacturer's)

S & F MCCB 415 Volt, 25 KA, 4 Pole, 160 Amps Capacity complete all as specified and as directed. (Make: Legrand Cat Part No. 4200 57 or equivelant of make as per List of Manufacturer's)

S & F MCCB 415 Volt, 25 KA, 4 Pole, 200 Amps Capacity complete all as specified and as directed. (Make: Legrand Cat Part No. 4202 18 or equivelant of make as per List of Manufacturer's)

S & F MCCB 415 Volt, 25 KA, 4 Pole, 250 Amps Capacity complete all as specified and as directed. (Make: Legrand Cat Part No. 4202 19 or equivelant of make as per List of Manufacturer's)

S & F MCCB 415 Volt, 36 KA, 4 Pole, 320 Amps Capacity complete all as specified and as directed. (Make: Legrand Cat Part No. 4220 06 or equivelant of make as per List of Manufacturer's)

S & F in repair Spreaders, 4 pole suitable upto 250 Amps complete all as specified and as directed. (Make: Legrand Cat No. 6250 18 or equivelant as per List of Manufacturer)

S & F in repair Spreaders, 3 pole suitable upto 250 Amps complete all as specified and as directed. (Make: Legrand Cat No. 6250 14 or equivelant as per List of Manufacturer)

S & F in repairs MCCB enclosure IP 43 with solid neutral link suitable for 4 pole MCCBs complete and making good disturbed surfaces complete all as specified and as directed. (Make: Legrand Cat No. 5078 06 or equivelant as per List of Manufacturer)

Supply and laying cable XLPE insulated screened, PVC bedded, galvanised steel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 6 Sqmm 2 core, fixing along the poles or passing through pipes or laid under floor of through walls etc jointing and testing including taking out/down existing cable complete all as specified and directed. (Note: Excavation and earth work will be measured and paid seperately)

Supply and laying cable XLPE insulated screened, PVC bedded, galvanised steel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 10 Sqmm 2 core, fixing along the poles or passing through pipes or laid under floor of through walls etc jointing and testing including taking out/down existing cable complete all as specified and directed. (Note: Excavation and earth work will be measured and paid seperately)

Supply and laying cable XLPE insulated screened, PVC bedded, galvanised steel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 10 Sqmm 4 core, fixing along the poles or passing through pipes or laid under floor of through walls etc jointing and testing including taking out/down existing cable complete all as specified and directed. (Note: Excavation and earth work will be measured and paid seperately)

Supply and laying cable XLPE insulated screened, PVC bedded, galvanised steel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 16 Sqmm 4 core, fixing along the poles or passing through pipes or laid under floor of through walls etc jointing and testing including taking out/down existing cable complete all as specified and directed. (Note: Excavation and earth work will be measured and paid seperately)

Excavation in trenches, not exceeding 1.5 M wide and not exceeding 1.5 M depth for foundation, trenches for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10sq m on plan and n exc 1.5m in depth and getting out in soft/loose soil complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm as in soft/loose soil complete all as specified and directed.

Removing excavated material not exc. 50 m and depositing where directed at a level not exc 1.5 m above the starting point complete all as specified and directed.

Supply and laying well burnt bricks, fly ash bricks laid breath wise across the length of cable in trenches for protection of UG cables complete all as specified and directed.

M & L for Sand cushioning with clean dry sand in trenches for protection of under ground cables (below, above and around the cable laid in trenches) complete all as specified and directed. (Note: Thickness after punning down shall be measured for payment)

S & F in repairs IP 66 junction box made of impact resistance polycarbonate & heat resistant materials of size 200x160x98mm mm, dust proof, water tight, light weight, acid resistant, corrotion proof insulated and shock proof, fire retardant, self extinguishing, helogen & silica free non toxic material, UV resistant with internally embedded gasket and fitted with required terminals alongwith type test certificate and veryfied by glow-wire test in accordance with IEC60695-2-11 complete all as specified and directed directed. (Make : HENSEL, Cat No : KF9255 or equivalent model of make as per list of manufacturer)

S & F in repairs LED outdoor Security light fittings, Min IP 65 rated, aluminium die cast housing with powder coating, pole mounted, 36 Watt, Lumen ≥ 3600, Luminous afficacy ≥ 100 Lum/Watt, CCT:WW/NW/CW, CRI > 70 Ra, 4KV surge Protection with open and short circuit protections as per IS: 10322 with all accessories, internally prewired and connecting up with twin core twisted copper conductor cable of suitable size including lamp complete all as specified and directed. (Make: Jaquar Cat No. LPCRSRT36WXC or equivelant of make as per list of manufacturer)

S & F in repairs LED outdoor Flood light fittings, Min IP 65 rated, High pressure aluminium die cast housing and toughened glass cover, 70 Watt, Lumen ≥ 7000, Luminous afficacy ≥ 100 Lum/Watt, CCT:WW/NW/CW, CRI > 70 Ra, 4KV surge Protection with open and short circuit protections as per IS: 10322 with all accessories, internally prewired and connecting up with twin core twisted copper conductor cable of suitable size including lamp complete all as specified and directed. (Make: Jaquar Cat No. LFLDSLM070XC or equivelant of make as per list of manufacturer)

S & F in repairs LED outdoor Flood light fittings, Min IP 66 rated, High pressure aluminium die cast housing and toughened glass cover, 100 Watt, Lumen ≥ 10000, Luminous afficacy ≥ 110 Lum/Watt, CCT:WW/NW/CW, CRI > 70 Ra, 4KV surge Protection with external SPD of 10 KV, with open and short circuit protections with all accessories, internally prewired and connecting up with twin core twisted copper conductor cable of suitable size including lamp complete all as specified and directed. (Make: Jaquar Cat No. LFLDSLM100XC or equivelant of make as per list of manufacturer)

S & F in repair 25 Watt, 230 Volts AC Post Top Lantern, outdoor type with decorative post top for 360 Degree indirect light, IP 65 protection with impact and corrosion reisitant comp[lete with driver and lamp, fixing accessories and connecting up with suitable copper conductor complete all as specified and directed. (Make: Havell's Cat No. CORALPT25WLED830SSYMTOPC or equivelant of make as per list of manufacturer)

S & F in repairs 10 Watt, 230 Volts AC, LED Bollard light fittings with soft 360 light distribution, Min IP 65 rated, outdoor type with decorative light with impact and corrosion resistant with driver and lamp and with all accessories and connecting up with twin core twisted copper conductor cable of suitable size including lamp and making good disturbed surfaces complete all as specified and directed. (Make: Jaquar Cat No. LBLDC0N010XW or equivelant of make as per list of manufacturer)

S & F in repairs 10 Watt, 230 Volts AC, LED Bollard light fittings, efficient light distribution, Min IP 65 rated, outdoor type with decorative light with impact and corrosion resistant with driver and lamp and with all accessories and connecting up with twin core twisted copper conductor cable of suitable size including lamp and making good disturbed surfaces complete all as specified and directed. (Make: Jaquar Cat No. LBLDCYL010XW or equivelant of make as per list of manufacturer)

S & F in repair 40mm bore, Steel water tubing, galvanised, medium grade with all fittings laid in trenches etc complete all as specified and directed.

S & F in repair 50mm bore, Steel water tubing, galvanised, medium grade with all fittings laid in trenches etc complete all as specified and directed.

S & F in repairs Rigid non-metalic PVC conduit (20mmdia) exclusive of boxes (junction/ treminal) but inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hook etc. complete all as specified and directed.

M & L for plain cement concrete (1:2:4), type B1 (using 20mm graded stone aggregate) as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, including necessary formwork complete all as specified and as directed.

S & F in repairs Air cooled Condenser assembly including pipes connections and brazing to the units for 1.5/2.0 Ton Ccapacity Split Acs complete all as per existing make and specifications and as directed.

S & F in repairs Power contactor, single pole, 240 Volts, 50 Hz coil voltage suitable for 1.5/2.0 Ton capacity Split ACs complete all as specified and as directed.

S & F in repairs Power contactor, three pole, 415 Volts, 50 Hz coil voltage suitable for 2.0/3.0 Ton capacity Tower ACs complete all as specified and as directed.

M & L for replacement of thermal insulation suitable for Split Acs of capacity 1.5/2.0/3.0 Ton complete all as existing specifications and as directed.

S & F in repairs Temperature sensor probe in the main circuit suitable for 1.5/2.0/3.0 Ton capacity split ACs complete as per the existing make and specifications and as directed.

S & F in repairs PCB Cord suitable for 1.5/2.0/3.0 Ton capacity split ACs/tower ACs, non Inverter type complete as per the existing make and specifications and as directed.

S & F in repairs PCB Cord suitable for 1.5/2.0 Ton capacity split ACs/tower ACs, Inverter type complete as per the existing make and specifications and as directed.

S & F in repairs PCB Cord suitable for 3.5/4 Ton capacity split ACs/tower ACs, Inverter type indoor and outdoor units complete as per the existing make and specifications and as directed.

S & F in repairs Remote controller suitable for 1.5/2.0/3.0 Ton capacity split ACs/tower ACs, complete as per the existing make and specifications and as directed.

S & F in repairs thermal over load relay suitable for 1.5/2.0/3.0 Ton capacity split ACs/tower ACs all as per the existing make and specifications and as directed.

S & F in repairs Running capacitor of 45 MFD suitable for 1.5/2.0/3.0 Ton capacity split ACs/tower ACs complete all as specified and as directed. (Make: Sarada/Unistar/Crompton)

S & F in repairs Starting capacitor of 50 MFD suitable for 1.5/2.0/3.0 Ton capacity split ACs/tower ACs complete all as specified and as directed. (Make: Sarada/Unistar/Crompton)

S & F in repairs Starting capacitor of 80/100 MFD suitable for 1.5/2.0/3.0 Ton capacity split ACs/tower ACs complete all as specified and as directed. (Make: Sarada/Unistar/Crompton)

S & F in repairs Drain connection with drain trap suitable for 1.5/2.0/3.0 Ton capacity split ACs/tower ACs all as per the existing make and specifications and as directed.

S & F in repairs MS stand for mounting outdoor unit of Split Acs of capacity 1.5/2.0/3.0 Ton complete all as per the existing make and specifications and as directed.

S & F in repairs copper tubing of 5/8" dia suitable for suction/discharge line of Split ACs complete all as per the existing make specification and as directed.

S & F in repairs copper tubing of 3/8" dia suitable for suction/discharge line of Split ACs complete all as per the existing make specification and as directed.

S & F in repairs copper tubing of 1/4" dia suitable for suction/discharge line of Split ACs complete all as per the existing make specification and as directed.

S & F in repairs copper tubing of 1/2" dia suitable for suction/discharge line of Split ACs complete all as per the existing make specification and as directed.

S & F in repairs Insulation for copper tubing of 5/8" dia of Split ACs complete all as per the existing make specification and as directed.

S & F in repairs Insulation for copper tubing of 3/8" dia of Split ACs complete all as per the existing make specification and as directed.

S & F in repairs Insulation for copper tubing of 1/4" dia of Split ACs complete all as per the existing make specification and as directed.

S & F in repairs Insulation for copper tubing of 1/2" dia of Split ACs complete all as per the existing make specification and as directed.

S & F in repair Three core, PVC insulated, unsheathed, multistranded copper flexible conductor cable, 1100 vols grade ISI marked of size 2.5 sqmm complete all as specified and as directed.

S & F in repairs PCB Card for window type ACs of capacity 1.0/1.5/2.0 Ton complete all as specified and as directed.

S & F in repairs complete outer body of window AC of 1.5 Ton capacity including fan motor, evaporator, condenser and all other accessories but exluding compressor complete all as per the existing make and specifications complete all as specified and as directed.

Supply and fix in repairs new evaporated fan blower motor of size 18" suitable for walk-in-cooler complete all as specified and as directed. (Make: Bluestar or equivalent as approved)

S & F in repairs voltage stabilizer of capacity 4KVA, working voltage 130-28 Volts, metal body with time delay system, wall mountable, built in thermal overload protection, low & high voltage cut-off protection, micro controller based design complete all as specified and directed. (Make: V-Gaurd Model No. VI 4170 PRIME or equivalent of make as per the list of manufacturer's)

S & F in repairs voltage stabilizer of capacity 5KVA, working voltage 130-28 Volts, metal body with time delay system, wall mountable, built in thermal overload protection, low & high voltage cut-off protection, micro controller based design complete all as specified and directed. (Make: V-Gaurd or equivalent of make as per the list of manufacturer's)

S & F in repairs complete outer body of outdoor unit of Split type AC of 1.5/2 Ton capacity in situ as per the existing make and competible model without compressor but including blower motor, fan connecting, necessary copper tubings by brazing/welding, gas charging with R-32 and testing after completion with full satisfection of Engr-in-Charge complete all as per the existing make and specifications and as directed by the Engr-in-Charge. (Note: Gas Charging and compressor unit (if any) shall be measured and paid seperately under respective items here-in-before) (Make: Blue Star/LG/Hitachi/Voltas/Carrier)

S & F in repairs complete outer body of Indoor unit of Split type AC of 1.5/2 Ton capacity in situ as per the existing make and competible model with Cooling Unit, PCB, Blower Unit with motor, Swing motor, remote unit, necessary electrical connections and copper tubing by gas welding, gas charging with R-32 and testing after completion with full satisfection of Engr-in-Charge complete all as per the existing make and specifications and as directed by the Engr-in-Charge. (Note: Gas Charging shall be measured and paid seperately under respective items here-in-before) (Make: Blue Star/LG/Hitachi/Voltas/Carrier)

Supply only R-32/R-410a/R-407 Gas as required at site for all types of cooling appliances complete all as specified and as directed.

S & F in repairs stationary louvers suitable for exhaust fan of 300mm sweep made out of powder coated aluminium anodised sheet of Min 1mm thick with non removable blades fixed permanantly at 45 degree angle for protection from rain including aluminium wire mesh of suitable size for bird control Complete all as per the existing specification and as directed.

All as per Serial item No. 73 above but for exhaust fan of 450mm sweep complete ditto.

Supply, fix, installation and commissioning BLDC ceiling fan of less noise, silent operation, speed controlable by regulator, light colour, conforming to IS-374-2019, 1200 mm sweep, 230 Volts, BEE 5 Star rating, any Govt recognised Lab tested, power factor >0.94 Wattage and not more than 35 Watt, air delivery not less than 215cmm and all accessories such as down rod etc and connecting up with 1.5 Sqmm, PVC insulated, multistranded copper conductor cables from ceiling rose to fan and fixing in existing position including taking down existing unserviceable ceiling fan of any descriptions and deposited at MES store yeard complete all as specified and directed. (Note: Ceiling fan should have minimum 3 years manufacturer's warranty) (Make : USHA/Havell's/Bajaj/CG)

S & F Exhaust fan, 450 mm sweep, heavy duty, metal body 1400 RPM, AC, single phase, complete with all accessories and louver and electric connection including making necessary holes in walls including taking down old unserviceable exhaust fan from its existing position and removing to MES store yard complete all as specified and directed (Make : Havells, Model : TURBOFORCE FHEHDSPDB180 or equivelant of make as per List of Manufacturer's as approved)

S & F Exhaust fan, 300 mm sweep, heavy duty, metal body 1400 RPM, AC, single phase, complete with all accessories and louver and electric connection including making necessary holes in walls including taking down old unserviceable exhaust fan from its existing position and removing to MES store yard complete all as specified and directed (Make : Havells, Model : Ventil Air DS or equivelant of make as per List of Manufacturer's as approved)

S & F PVC body Exhaust fan, 250 mm sweep, AC, single phase, 1200 RPM complete with all accessories and electric connection including making necessary holes in walls including taking down old unserviceable exhaust fan from its existing position and removing to MES store yard complete all as specified and directed (Make : Havells, Model : Ventil Air DX or equivelant of make as per List of Manufacturer's as approved)

S & F PVC body Exhaust fan, 200 mm sweep, AC, single phase complete with all accessories and electric connection including making necessary holes in walls including taking down old unserviceable exhaust fan from its existing position and removing to MES store yard complete all as specified and directed (Make : Havells, Model : Ventil Air DX or equivelant of make as per List of Manufacturer's as approved)

S & F in repairs 3 pin male top plug, 5 Amps for electrical fittings complete all as specified and as directed.

S & F in repairs 3 pin male top plug, 15 Amps for electrical fittings complete all as specified and as directed.

S & F bus bar chamber (Cu), IP 42, TPN, 200 Amps, 415 Volts, 4 way including enclosure and connection etc complete all as specified and directed. (Make: Havell's Cat No. IHBC020004 or equivelant approved make as per list of manufacturer)

S & F in repairs PCB board of walk-in-cooler as per the existing make, model and specification complete all as specified and as directed. (Make; Bluestar Model No. CSDTIC 520000 or equivalent as approved)

S & F in repairs temperature sensor probes of walk-in-cooler as per the existing make, model and specification complete all as specified and as directed. (Make; Bluestar or equivalent as approved)

S & F in repairs common earth bus bar suitable for 08/12 way SPN DB as per the existing make & model complete all as specified and directed.

S & F in repairs common neutral bus bar suitable for 08/12 way SPN DB as per the existing make & model complete all as specified and directed.

Material and Labour for preparation of old metal surfaces of Panel Boards after complete removal of existing painting over 10cm width or girth not otherwise described and applying two coats of enamel paint (1st quality) of simens grey colour over a coat red oxide zinc chrome primer and marking the Qtr No, Panel Board No in front side complete all as specified and directed by engineer in Charge. (Note: Adjoing areas there to properly covered befor painting. Adjoing areas, floor, walls are to cleaned free of paint spillage after painting work. If Paint spill is not cleaned to match with exsting surface a panel recovery @ Rs.200/- per location will be made from payments due to the contractor).

M & L for Repairs to Panel board indoor type sheet metal approximate size (8 x1.5 x 1.5 Feet's) parts tinkering the parts and replacing fully corroded sheet metal parts like base plate, top plate, front cover etc with appropriate gauges MS sheet including bending to match with the existing size, welding brazing and assembling including replacing all nuts & bolts in MCBs and proper legging in cable and control wire sheet metal screws metal screws and painting the complete body with two coat of synthetic enamel paint over a coat of Zinc chrome primer and marking the Qtr No, Panel Board No in front side and all as specified and as directed

S & F in repairs UPVC cable trunking casin and capping of size 45x45mm including cover, bends, elbow, coupler, tees, internal and external bends, arranging existing cables/copper refrigerator pipe etc and making good the disturbed surfaces to match with existing surfaces complete all as specified and directed.

S & F in repairs UPVC cable trunking casin and capping of size 75x75mm including cover, bends, elbow, coupler, tees, internal and external bends, arranging existing cables/copper refrigerator pipe etc and making good the disturbed surfaces to match with existing surfaces complete all as specified and directed.

S & F in repairs UPVC cable trunking casin and capping of size 100x100mm including cover, bends, elbow, coupler, tees, internal and external bends, arranging existing cables/copper refrigerator pipe etc and making good the disturbed surfaces to match with existing surfaces complete all as specified and directed.

M/s SAI GANESH ENGINEERING ENTERPRISES

R AND A ASSOCIATES ENGINEERS CONTRACTORS