S.R. To Construction of New Toilet Block Work In kalyan House Bunglow at Jamnagar.(JMN/SR/R/2025-26/06)

Name of work : S.R. To Construction of New Toilet Block Work In kalyan House Bunglow at

Jamnagar.(JMN/SR/R/2025-26/06)

BILL OF QUANTITIES

Sr. Item of work QTY Unit Rs. In Amount

1 Excavation for foundation in Hard Murrum upto 8.50 Cum 273.44

any depth including sorting out and stacking

of useful materials and disposing of the

excavated stuff upto all lead and lift.

2 Brick work using common burnt clay building bricks 3.00 Cum 4279.97

having crushing strength not less than 35 kg./Sq.Cm.

in foundation and plinth in Cement Mortar 1:6 (1-

Cement : 6 -fine sand)(B) Conventional

3 Brick work using common burnt clay building bricks 4.50 Cum 4568.40

having crushing strength not less than 35 kg./Sq.Cm.

in Superstructure in Cement Mortar 1:6 (1- Cement :

-fine sand)(B) Conventional

4 Filling available excavated earth (excluding rock) in 7.00 Cum 137.47

trenches, plinth sides of foundations etc. in layers not

exceeding 20cm. in depth, consolidating each

deposited layer by ramming and watering.

5 Providing and laying cement concrete 1:4:8 (1- 20.50 Cum 2941.12

Cement:4-coarse sand:8- crushed stone

aggregate 40mm nominal size) and curing

complete excluding cost of formwork in (A)

foundation and plinth

6 Providing and laying Cement concrete 1:1: ½ :3 0.30 Cum 7475.01

(1-Cement:1:1 / 2 coarse sand and 4-crushed

stone aggregate 20mm nominal size) and curing

complete including cost of formwork in (Wall

7 Providing and laying ordinary cement concrete 0.20 Cum 10662.57

1:1.5:3 (1-Cement:1.5-Coarse sand:3-graded

stibe aggregates 20mm nominal size) for R.C.C.

LINTEL including finishing smooth with curing

etc. complete excluding the cost of

8 Providing and laying ordinary cement concrete 0.50 Cum 7331.59

1:1½:3 (1-Cement:1.5-coarse sand:3-graded

stone aggregates 20mm nominal size) and

finishing smooth with curing etc. complete

including the cost of formwork excluding the

cost of reinforcement for R.C.C. work in (with all

thickness) for SLAB

9 Providing TMT Bar FE 500D reinforcement for 90.00 Kg 77.28

R.C.C. work including bending, binding and

placing in position complete upto all floor level.

10 Providing 10mm thick cement plaster in single 2.10 Sqm 124.83

coat on brick concrete walls for interior

plastering upto floor two level and finished even

smooth in (i) Cement Mortar 1:4 (1-Cement:4-

1 of 6 DTP of new Toilet In Prant Quarter 12-25

Sr. Item of work QTY Unit Rs. In Amount

11 20mm thick sand faced cement plaster on walls 34.00 Sqm 323.21

on height 10 metres above ground level

consisting of 12mm thick backing coat of C.M.

1:3 (1-Cement:3-sand) and 8mm thick finishing

coat of C.M. 1:1 (1-Cement:1-sand) etc.

12 Providing and laying white glazed tiles 6mm 5.00 Sqm 964.47

thick in flooring treads of steps and landing laid

on a bed of 12mm thick cement mortar 1:3 (1-

cement : 3-coarse sand ) finishing with flush

pointing in white cement.

13 Providing and laying white glazed tiles 6mm 16.00 Sqm 1127.48

thick in skrting risers of steps and dedo on

10mm thick cement plaster 1:3 (1-cement : 3-

coarse sand) and jointed with white cement

14 Providing and fixing 18mm thick black granite 5.00 Sqm 3174.43

stone in Jambs & sills for door over 10mm

(Average) thick base of cement mortar 1:3 (1-

cement : 3-coarse sand) laid over and jointed

with grey cement slurry including rubbing and

polishing etc. complete.

15 Providing and fixing of 28mm thick fiber glass 2.00 Sqm 1560.32

shutter with 1.5 to 2.0mm thick fire

extinguishing grade FRP skin in depressed

panel design having extra reinforcement on

sides and edges and in Gel coat finish. The core

of the shutter is to be filled up with injected fire

extinguishing grade polyurethane foam done in

situ along with embedded wodden pieces for

stiffening and also for taking hinges and

fixtures. The whole shutter is to be waterproof,

weatherproof, termite proof and resitance to

mild acid / Alkali, Rates are to be inclusive of S. /

S. hinges with necessary screws and

alluminium fixtures and fastening.

16 Providing and fixing standared extruded of 0.50 Sqm. 1175.55

alluminium section of size 63mm x 38.10mm x

1.2mm , @ Wt. 0.643 Kg/mt with colour Powder

Coated alluminium frame for ventilation with

mm thick frosted glass as details etc complete

for Ventilation

17 Wall painting (two coats) with plastic emulsion paint 5.00 Sqm 86.37

of approved brand and manufacture on undecorated

wall surfaces to give an even shade including

thoroughly brushing the surface free from mortar

droppings and other foreign matter and sand

papered smooth.

18 Finishing wall with weather proof exterior 34.00 Sqm 122.13

emulsion paint on wall surface (two coats) to

give an required shape aeven shade after

throguhly brushing the surface to remove all

dirt, and remains of loose powdered materials

2 of 6 DTP of new Toilet In Prant Quarter 12-25

Sr. Item of work QTY Unit Rs. In Amount

19 Providing and fixing wash down water closet 1.00 No. 1689.73

(European type W.C.Pan / Anglo Indian) with

integral "P" or "S" traps including jointing the

trap with soil pipe in canal mortar 1:1 (1-

Cement:1-fine sand) providign and fixing seat

cover W.C.) 32mm dia galvanized steel tube

flush pipe etc. comp.

20 Providing and fixing flat back wash basin of 550 1.00 No. 2363.40

x 400mm size including C.I. or M.S. brackets

fixing in wall C.P. brass work of 32mm dia,,.

fisher union of 32mm, pillar cock of 15mm dia,

PVC waste pipe, PVC connection, brass

stopcock of 15mm dia etc. complete.

21 Providing and fixing flat back Urinal of 430 x 260 1.00 No. 1432.18

x 350mm size white colour including necessary

PVC waste pipe, PVC waste coupling & 50mm

C.P. Brass Stop cock fitting all labour and

22 Providing and fixing PVC SWR Nahni Trap IS 3.00 No. 588.26

14735 for drain with jali of the following nominal

diameter of self cleansing design with C.I.

Scrwed down or hinged grating including the

cost of cutting and making good the walls.(A)

23 Providing and fixing Brass Chromium plated 3.00 No. 186.82

screw down bib tap of 15 mm size.

24 Providing laying and jointing in true line and 3.00 Rmt. 72.64

level U.P.V.C. Pipe ( SCH- 40) for cold water

including fittings as approved by Engineer In

Charge. Pipe shall be fixed on the wall with the

help of clamp at every two metre C/C or shall be

concealed as directed including necessary

fittings etc. including testing of pipe and joints

and fixing the same with adhesive solvent,

including cost of all materials.(A) 15mm dia.

25 Providing laying and jointing in true line and 23.00 Rmt. 91.83

level U.P.V.C. Pipe ( SCH- 40) for cold water

including fittings as approved by Engineer In

Charge. Pipe shall be fixed on the wall with the

help of clamp at every two metre C/C or shall be

concealed as directed including necessary

fittings etc. including testing of pipe and joints

and fixing the same with adhesive solvent,

including cost of all materials.(B) 25mm dia.

26 Providing laying and jointing in true line and 61.00 Rmt. 148.11

level U.P.V.C. Pipe ( SCH- 40) for cold water

including fittings as approved by Engineer In

Charge. Pipe shall be fixed on the wall with the

help of clamp at every two metre C/C or shall be

concealed as directed including necessary

fittings etc. including testing of pipe and joints

and fixing the same with adhesive solvent,

including cost of all materials.(D) 40mm dia.

3 of 6 DTP of new Toilet In Prant Quarter 12-25

Sr. Item of work QTY Unit Rs. In Amount

27 Providing laying and jointing in true line and 35.00 Rmt. 195.66

level U.P.V.C. Pipe ( SCH- 40) for cold water

including fittings as approved by Engineer In

Charge. Pipe shall be fixed on the wall with the

help of clamp at every two metre C/C or shall be

concealed as directed including necessary

fittings etc. including testing of pipe and joints

and fixing the same with adhesive solvent,

including cost of all materials.(E) 50mm dia.

28 Providing, laying and jointing in true line and 20.00 Rmt. 897.78

level U.P.V.C. SWR Type B-Pipe conforming to

IS 13592-1992 with one end plain and other end

socketed with rubbering & fitting conforming to

IS : 14735-1999 of approved make for drainage

system pipe line, pipe shall be jointed with each

other with rubber lubricant, pipe shall be fixed

on wall using of PVC clamp of the size 160mm

diameter x 210mm length x 196mm high at every

2000mm center to center or shall be concealed

in walls as directed including necessary fittings

such as bends, shoes etc. including testing of

pies and joints and jointed with adhesive solvent

cement including cost of all materials.(B)

29 Providing and fixing Gun metal check or Non 1.00 No. 186.82

return fullway wheel valve (A) 15mm dia.

30 Providing and fixing Gun metal check or Non 2.00 No. 663.42

return fullway wheel valve (E) 40mm dia.

31 Providing and fixing Gun metal check or Non 2.00 No. 1878.60

return fullway wheel valve (i) 50mm dia.

32 Providing erecting and fixing Tripal layer ISI 7000.00 Ltr. 12.12

water tank of required capacity each with all

necessary fittings , tank cover and as required

connection etc. complete on terrace

33 Providing and fixing 5mm thick glass mirror 0.40 Sqm 2544.19

machine cut belveled edge mounted on wall

with special type wall touch SS mirror bracket

fixing with necessary plugs.

34 Constructing brick masonry chamber for 6.00 No. 2932.92

underground C.I. Inspection chamber and

bends with bricks having crushing strength not

less than 35Kg. / Cm2 in C.M. 1:5 C.I. cover with

frame (Lighty duty) 455mm x 610mm internal

dimensions, total weight of cover with frame to

be not less than 38 Kg. (Wt of cover 23 Kg. and

Wt. of frame 15Kg.) R.C.C. top slab with 1:2:4

mix (1-Cement:2-coarse sand:4-graded stone

aggregate 20mm size) foundation concrete

1:5:10 inside plaster 15mm thick with cement

mortar 1:3 finished smooth with a floating coat

of neat cement on walls and bed concrete etc.

complete. (I) Inside dimensions 455mm x

610mm and 450mm deep for single pipe line.

4 of 6 DTP of new Toilet In Prant Quarter 12-25

Sr. Item of work QTY Unit Rs. In Amount

35 Providing and fixing pre-cast Rubber Dye / steel 129.00 Sqm 707.54

Dye inter locking concrete block 60mm thick

with grade of concrete M300 pnumatic

compressed / vibrated mechanically and as per

approved design Confirming to IS 15658 :

including 35 mm Sand layer for levelling and

filling the joint with sand in proper line and level

as per guidlines of IRC : SP 63-2018 etc.

Amount of my tender work out as under

I / We am/are willing to carry out the work at ………………………………………….. % above /

below Percent [should be written in figures and words] of the estimated rates mantioned

above. Amount of my/our tender works out as under

Estimated Amount : # Estimated Amount :

Put to tender Rs. : . Put to tender Rs. :

Deduct % below Rs. . Add % above Rs.

Net Rs. . Total Rs.

In words : . In words :

(# Please strike out whichever is not applicable)

Signature of Contractor

Assistant Engineer Deputy Executive Engineer

City-1, Jamnagar City (R & B) Sub Division

5 of 6 DTP of new Toilet In Prant Quarter 12-25

Sr. Item of work QTY Unit Rs. In Amount

1) The work shall be carried out as per Public Works Department Hand Book, I.S. Specification

and other specification of the Division or as Directed.

2) All the columns in Schedule should be filled in INK and the total of the entries in the last

column should be strike out by the Contractor under his Signature.

3) Rates should include clearance of site (Prior to commencement of work and its close) in all

respect and good for work under all conditions of site moisture weather etc.

4) The Contractor shall exhibit the details of works, Tenders amount and specification as per

Govt. Circular No. TD 32772 N. Dt. 26-4-78 and as per G.R. No. TNC-9-24-C, Dt. 18-11-91, as

directed by Engineer-in-Charge of the works, on board at site of the work.

5) Contractor shall even "NIL" percentage, if no deduction is offered.

6) Testing of materials shall be as per statement attached with the specification. The material

shall be tested in GERI Bill for the testing shall be paid by the Executive Engineer and 1% of

amount put to tender after deducting the cost of materials to be supplied by Department as per

SCHEDULE 'A' at the sanctioned estimate rates from the Contractor in Running Bills. (As per

G.R.No. (R&B) TNC-1085/4/C Dt. 20-12-91 and modified ide (R&B) Deptt. Circular No.

7) For R.C.C. Item where there is change of grade mix or charge as per actual mix design the

difference of cement consumption shall be deducted from rate of original item at the rate of

star rate mentioned in the tender.

8) 1% L.C. shall be deducted from the bill as per agreement.

9) GST will be paid extra as per Govt. Emendment.

10) GST and Income tax will be deducted at source while making payment of bills

Signature of Contractor

Assistant Engineer Deputy Executive Engineer

City-1, Jamnagar City (R & B) Sub Division

6 of 6 DTP of new Toilet In Prant Quarter 12-25