Loading
Loading…
Loading…
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Tender Value
₹60,350
EMD Value
Exempted
Closing Date
22 Oct 2026, 6:00 pm
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Published by the portal on this tender, for queries and grievance redressal.
Automobile Models and Components
9974273
GEM/2026/B/8107690
Two Packet Bid
CUT SECTION WORKING MODEL OF ROTARY CLUTCH
Devbhumi Dwarka, Gujarat
Total value wise evaluation
BOQ
8 documents required · 8 mandatory
3 yrs
₹31
₹1 L
50%
Exempted
Yes
7 Oct 2026
7 Oct 2026
23 Oct 2026
| Item No | Item Title | Description | Qty | Unit | Consignee | Delivery (days) | Spec |
|---|---|---|---|---|---|---|---|
| 1 | AIR BLOW GUN WITH STANDARD ACCESSORIES | TRIGGER OPERATED WITH INTERCHANGEABLE NOZZLES | 3 | NOS | Nareshkumar B Kathrotiya 360510,GOVT.INDUSTRIAL TRAINING INSTITUTE, BHANVAD, BHANVAD TRAN PATIYA ROAD, TA-BHANVAD, DI-DEVBHUMIDW ARKA | 15 | |
| 2 | AIR RATCHET WITH STANDARD ACCESSORIES | Air ratchet with air pressure of 90 PSI, maximum torque of 27 Nm, free speed of 240 RPM and standard bolt size of 10 mm. Overall length shall be approximately 200 mm. Average air consumption shall be 2.5 CFM. Air inlet shall be 1/4 inch and minimum hose size shall be 10 mm. The air ratchet shall be supplied with a suitable PVC or metal storage case for safe storage. | 2 | NOS | Nareshkumar B Kathrotiya 360510,GOVT.INDUSTRIAL TRAINING INSTITUTE, BHANVAD, BHANVAD TRAN PATIYA ROAD, TA-BHANVAD, DI-DEVBHUMIDW ARKA | 15 | |
| 3 | CUT SECTION WORKING MODEL OF ROTARY CLUTCH ASSEMBLY OF TWO WHEELER | Real two wheeler multi plate wet clutch assembly for automobile lab training to demonstrate power connection and disconnection. The clutch shall have cut sections to clearly show friction plates, steel plates, clutch hub, pressure plate, clutch basket and release springs. Internal moving parts and cut edges shall be painted in different bright colors for easy identification. A manual hand lever or rotating handle shall be provided to operate the clutch release mechanism and allow students to observe plate movement and power transfer. The complete unit shall be mounted on a heavy duty powder coated steel frame with rubber feet for stable table top use and protection against rust. | 1 | NOS | Nareshkumar B Kathrotiya 360510,GOVT.INDUSTRIAL TRAINING INSTITUTE, BHANVAD, BHANVAD TRAN PATIYA ROAD, TA-BHANVAD, DI-DEVBHUMIDW ARKA | 15 | |
| 4 | CUT-SECTION MODEL OF A CONTINUOUS VARIABLE TRANSMISSION | System Overview A real two wheeler scooter CVT assembly designed for technical training to demonstrate continuous gear ratio variation
Sectioning & Visibility Cleanly cut sections clearly show internal parts like variator rollers, sliding sheaves, V belt, torque spring, and centrifugal clutch.
Color Codin Cut surfaces and moving parts are painted in bright, contrasting colors for easy component identification.
Operation Equipped with a manual hand crank to rotate input shafts and observe real time pulley diameter changes and automatic speed ratio shifts.
Mounting and Finish Mounted on a heavy duty, powder coated steel base with anti corrosion treatment on all metal parts. | 1 | NOS | Nareshkumar B Kathrotiya 360510,GOVT.INDUSTRIAL TRAINING INSTITUTE, BHANVAD, BHANVAD TRAN PATIYA ROAD, TA-BHANVAD, DI-DEVBHUMIDW ARKA | 15 | - |
| 5 | DEMONSTRATION BOARD OF MAGNETO IGNITION SYSTEM OF A TWO WHEELER | Open board educational system for automobile laboratory training to demonstrate magneto ignition and spark generation in two wheelers without an external battery. The model shall include original two wheeler magneto assembly with flywheel and stator or rotor, ignition coil, contact breaker points or pickup coil, condenser, ignition switch, high tension wire and spark plug. All components shall be mounted on a strong non conductive bakelite or acrylic board with simple circuit diagram, component names and color coded wiring. A manual hand crank or variable speed electric motor shall be provided to rotate the magneto and produce sparks at the spark plug during operation. The complete unit shall be mounted on a strong powder coated steel frame with rubber feet for stable table top demonstration. | 1 | NOS | Nareshkumar B Kathrotiya 360510,GOVT.INDUSTRIAL TRAINING INSTITUTE, BHANVAD, BHANVAD TRAN PATIYA ROAD, TA-BHANVAD, DI-DEVBHUMIDW ARKA | 15 | |
| 6 | GROWLER | Growler for testing starter motor armatures. The unit shall produce 10 A secondary output when operated on 220 to 230 V supply. It shall detect earth faults, short circuits and open circuits in the starter motor armature. It shall check the earth condition of the armature and detect short circuits in the armature core. Input supply shall be single phase 220 to 260 V, 50 to 60 Hz. Testing current shall be 2 A. Testing range shall be 40 to 120 mm diameter. Testing voltage shall be 12 V and 24 V. | 1 | NOS | Nareshkumar B Kathrotiya 360510,GOVT.INDUSTRIAL TRAINING INSTITUTE, BHANVAD, BHANVAD TRAN PATIYA ROAD, TA-BHANVAD, DI-DEVBHUMIDW ARKA | 15 | - |
| 7 | IGNITION COIL AND CDI UNIT OF FOUR DIFFERENT MAKE | IGNITION COIL AND CDI UNIT OF FOUR DIFFERENT MAKE | 1 | NOS | Nareshkumar B Kathrotiya 360510,GOVT.INDUSTRIAL TRAINING INSTITUTE, BHANVAD, BHANVAD TRAN PATIYA ROAD, TA-BHANVAD, DI-DEVBHUMIDW ARKA | 15 | |
| 8 | LAYOUT OF WORKING MODEL 12 V AUTOMOBILE ELECTRICAL SYSTEMS | 12 V DC educational demonstration board for automobile laboratory training to demonstrate complete vehicle electrical circuits. The board shall include genuine 12 V automotive components such as high and low beam headlights, turn indicators, tail light, brake light, electric horn, ignition switch, fuse box, flasher unit, relays, control switches and battery terminals. It shall have 12 V DC power supply or battery connection. All components shall be mounted on a strong insulated acrylic or bakelite board with a clear color coded wiring diagram and labeled terminals. The system shall be fully functional for operating lights, indicators and horn. Measurement points with banana sockets shall be provided for checking voltage, continuity and current. The complete unit shall be mounted on a heavy duty powder coated steel frame with rubber mounts for stable table top use. | 1 | NOS | Nareshkumar B Kathrotiya 360510,GOVT.INDUSTRIAL TRAINING INSTITUTE, BHANVAD, BHANVAD TRAN PATIYA ROAD, TA-BHANVAD, DI-DEVBHUMIDW ARKA | 15 | |
| 9 | LIFTER VALVE SPRING | Valve Lifter | 1 | NOS | Nareshkumar B Kathrotiya 360510,GOVT.INDUSTRIAL TRAINING INSTITUTE, BHANVAD, BHANVAD TRAN PATIYA ROAD, TA-BHANVAD, DI-DEVBHUMIDW ARKA | 15 | |
| 10 | PISTON RING COMPRESSOR | Piston ring compressor with self locking ratchet mechanism for fitting pistons in most two wheelers. Made from high grade spring steel. Suitable for piston ring sizes up to 125 mm diameter. | 3 | NOS | Nareshkumar B Kathrotiya 360510,GOVT.INDUSTRIAL TRAINING INSTITUTE, BHANVAD, BHANVAD TRAN PATIYA ROAD, TA-BHANVAD, DI-DEVBHUMIDW ARKA | 15 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
bid_9974273.pdf
GEM_BID • 0.17 MB
07_specification_boq-4_2026-10-01-14-02-20_0f09839fb3098d150d3e49eb6a0a93da.pdf
BOQ • 0.02 MB
08_boq_item_sample_file_boq-4_2026-10-01-14-02-20_6ff28f06cc22c5ba54cc2cb9022ce576.csv
BOQ • 0.00 MB
09_ATC_e94b10f3-df78-47a3-84941790844140039_BHANVAD_CON.pdf
GEM_OTHER • 0.39 MB
gtc.pdf
GEM_OTHER • 0.71 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .