Necessary Repairing and Maintenance works in the SBB Physiotherapy college building Campus AMC MET of Paldi Ward West Zone of AMC Area.

(3) Tender Opening Date :- To be intimated after technical bid eveluation

All Details may be download of above notice will be available in www.tender.nprocure.com

AHMEDABAD MUNICIPAL CORPORATION

AMC MET/HOSPITAL

Name of Work :- Necessary Repairing and Maintenance works in the SBB

Physiotherapy college building & Campus AMC MET of Paldi Ward West Zone of

Items Rate Amount

S.R.NO. Qty Per

Excavation for foundation upto 1.5 m

depth including sorting out and stacking of

useful materials and disposing off the

excavated stuff upto 50 Meter lead.(A) Loose or

soft soil.( iteam code 04001A ,S.O.R Ahemdabad

Excavation for foundation upto 1.5 m depth

including sorting out and stacking of useful

2 2.00 materials and disposing off the excavated stuff cu.m 148.19

upto 50 Meter lead.(B) Dense or Hard soil.( iteam

code 04001B ,S.O.R Ahemdabad City 2023-24)

Excavation for foundation for depth from 1.5 m to

3.0 m including sorting out and stacking of useful

materials and disposing off the excavated stuff

upto 50 Meter lead.(A) Loose or soft soil.( iteam

code 04002A ,S.O.R Ahemdabad City 2023-24)

Excavation for foundation for depth from 1.5 m to

3.0 m including sorting out and stacking of useful

4 5.00 materials and disposing off the excavated stuff cu.m 160.77

upto 50 Meter lead.(B) Dense or Hard soil.( iteam

code 04002B ,S.O.R Ahemdabad City 2023-24)

Excavation for foundation for depth from 3.0 m

to 5.0 m including sorting out and stacking of

useful materials and disposing off the

excavated stuff upto 50 Meter lead.(A) Loose

or soft soil.( iteam code04003A,S.O.R

Ahemdabad City 2023-24)

Excavation for foundation for depth from 3.0 m to

5.0 m including sorting out and stacking of useful

materials and disposing off the excavated stuff

upto 50 Meter lead.(B) Dense or Hard soil.( iteam

code04003B,S.O.R Ahemdabad City 2023-24)

Filling available excavated earth (excluding

rock) in trenches. plinth, sides of foundations

etc. in layers not exceeding 20 cm. in depth

consolidating each disposited layer by ramming

and watering.( iteam code 4006,4.12,S.O.R

Ahemdabad City 2023-24)

Filling in plinth with sand under floors including

watering ramming, consolidating and dressing

complete.(iteam code 4007A,4.24,S.O.R

Ahemdabad City 2023-24)

Filling in foundation and plinth with murrum

or selected soil in layers of 20cm. thickness

9 5.00 including watering, ramming and consolidating cu.m 286.2

etc. complete.(iteam code 04008A,S.O.R

Ahemdabad City 2023-24)

Filling in foundation and plinth with brick Bats

Chhara in layers of 20cm. thickness including

10 5.00 watering, remming and consolidating etc. cu.m 594.61

complete. (iteam code 04009A,S.O.R Ahemdabad

Boring holes 3.5 m deep in ordinary soil (for cast

in situ piles) and getting out the soil and disposal

of the surplus excavated soil as directed within a

11 5.00 lead of 50 Meter for following diameter of Each 1078.13

pipes.(i)200 mm.(iteam code 04010A, 4.27,S.O.R

Ahemdabad City 2023-24)

Boring holes 3.5 m deep in ordinary soil (for cast in

situ piles) and getting out the soil and disposal of

the surplus excavated soil as directed within a lead

of 50 Meter for following diameter of pipes.(ii)

250 mm.(iteam code 04010B , 4.27,S.O.R

Ahemdabad City 2023-24)

Boring holes 3.5 m deep in ordinary soil (for cast in

situ piles) and getting out the soil and disposal of

the surplus excavated soil as directed within a lead

of 50 Meter for following diameter of pipes.(iii)

300 mm (iteam code 04010C , 4.27,S.O.R

Ahemdabad City 2023-24)

Extra for under reaming inside the bore Holes for

under reamed piles of following Diameter.(i)

mm(iteam code 04011BA, 4.28,S.O.R Ahemdabad

Extra for under reaming inside the bore Holes for

under reamed piles of following Diameter.(ii)

15 1.00 mm(iteam code 04011B , 4.28,S.O.R Ahemdabad Each 516.39

Extra for under reaming inside the bore Holes for

under reamed piles of following Diameter.(iii)

16 1.00 mm (iteam code 04011C, 4.28,S.O.R Ahemdabad Each 642.3

Excavation for foundation upto 1.5 m depth

including sorting out and stacking of useful

materials and disposing off the excavated stuff

upto 50 Meter lead.(A) Loose or soft soil.

(EXECUTED WITH MANUAL LABOUR)(iteam code

04B001A ,S.O.R Ahemdabad City 2023-24)

Excavation for foundation upto 1.5 m depth

including sorting out and stacking of useful

materials and disposing off the excavated stuff

upto 50 Meter lead.(B) Dense or Hard soil.

(EXECUTED WITH MANUAL LABOUR)(iteam code

04B001B,S.O.R Ahemdabad City 2023-24)

Providing and laying cement concrete 1:3:6 (1-

Cement : 3- coarse sand : 6- hand broken stone

aggregates 40 mmnominal size) and curing

complete excluding cost of formwork in (A)

Foundation and Plinth (iteam code 05003A,5.3.2

,S.O.R Ahemdabad City 2023-24)

Providing and laying cement concrete 1:4:8 (1-

Cement : 4- coarse sand : 8- hand broken stone

20 2.00 and curing complete excluding cost of formwork in cu.m 2653.67

(A) Foundation and Plinth (iteam code

05004A,5.3.3 ,S.O.R Ahemdabad City 2023-24)

Providing and laying cement concrete 1:3:6 (1-

Cement : 3- Coarse sand : 6- crushed stone

aggregates 20 mm nominal size) and curing

complete including cost of formwork in (A) Wall

Caps / Coping (iteam code 05005A,5.3.14 ,S.O.R

Ahemdabad City 2023-24)

Providing and laying cement concrete 1:5:10

(1- Cement : 5- Coarse sand : 10- hand broken

stone aggregates 40 mm nominal size)

22 2.00 and curing complete excluding cost of cu.m 2492.51

formwork in (A)Foundation and Plinth (iteam

code 05006A,5.3.4 ,S.O.R Ahemdabad City 2023-

Providing and laying cement concrete 1:2:4

(1- Cement : 2- Coarse sand : 4- graded

stone aggregates 20 mm nominal size)

23 2.00 and curing complete excluding cost of cu.m 3661.3

formwork in (A) Foundation and Plinth (iteam

code 05010A,5.3.13 ,S.O.R Ahemdabad City 2023-

Providing and laying cement concrete 1:2:4

(1- Cement : 2- Coarse sand : 4- graded

stone aggregates 20 mm nominal size)

24 2.00 and curing complete excluding cost of cu.m 3661.3

formwork in (B)Independent piers, columns,

and pillars, upto floor two level (iteam code

05010BA,5.3.13 ,S.O.R Ahemdabad City 2023-24)

Providing and laying cement concrete work 1:2:4

(1- Cement : 2- Coarse sand : 4- graded stone

aggregates 20 mm nominal size) and curing

complete excluding cost of formwork and

reinforcement for reinforced concrete work in (A)

Foundations, footings, Base or columns and Mass

concrete (iteam code 05011AA,5.4.1 ,S.O.R

Ahemdabad City 2023-24)

Providing and laying cement concrete work 1:2:4

(1- Cement : 2- Coarse sand : 4- graded stone

aggregates 20 mm nominal size) and curing

complete excluding cost of formwork and

26 1.00 reinforcement for reinforced concrete work in (B) cu.m 4012.47

Slabs, landing, shelves, Balconis , Lintels, Beams,

Girders and Cantilever upto floor two level. (iteam

code 05011BA,5.4.1 ,S.O.R Ahemdabad City 2023-

Providing and laying cement concrete work 1:2:4

(1- Cement : 2- Coarse sand : 4- graded stone

aggregates 20 mm nominal size) and curing

complete excluding cost of formwork and

reinforcement for reinforced concrete work in (D)

Columns, Pillars posts and struts upto floor two

level. (iteam code 05011DA,5.4.1 ,S.O.R

Ahemdabad City 2023-24)

Providing TMT Bar FE 415 reinforcement for

R.C.C. work including bending, binding and

28 10.00 placing in position complete upto floor two level kg 66.59

(iteam code 05014BA,5.4.11 ,S.O.R Ahemdabad

Providing TMT Bar FE 500D reinforcement for

R.C.C. work including bending, binding and placing

29 10.00 in position complete upto floor two level (iteam kg 75.46

code 05014C,5.4.11 ,S.O.R Ahemdabad City 2023-

Providing and laying controlled cement

concrete M.200 and curing complete excluding

the cost of formwork and reinforcement

30 1.00 for reinforced concrete work in (A) Foundations, cu.m 3977.88

footings, Base of columns and Mass concrete

(iteam code 05024AA,5.8.2 ,S.O.R Ahemdabad City

Providing and laying controlled cement

concrete M.200 and curing complete excluding

the cost of formwork and reinforcement

31 1.00 for reinforced concrete work in (B) Walls, from cu.m 4484.17

top of foundation level upto floor two level (iteam

code 05024BA,5.8.2 ,S.O.R Ahemdabad City 2023-

Providing and laying controlled cement

concrete M.200 and curing complete excluding

the cost of formwork and reinforcement

for reinforced concrete work in (C) Slabs

,landing, shelves,Balconies Lintels, Beams,

Girders and Cantilever upto floor two level.

(iteam code 05024CA,5.8.2 ,S.O.R Ahemdabad City

Providing and laying controlled cement

concrete M.200 and curing complete excluding

33 1.00 the cost of formwork and reinforcement cu.m 4558.2

for reinforced concrete work in (D) Columns,

Pillars posts and struts upto floor two level.

Providing and laying controlled cement

concrete M.200 and curing complete excluding

the cost of formwork and reinforcement

for reinforced concrete work in (E) Staircases

excluding landing upto floor two level (iteam code

05024EA,5.8.2 ,S.O.R Ahemdabad City 2023-24)

Providing and laying controlled cement

concreteM.200 and curing complete excluding

the cost of formwork and reinforcement

35 1.00 for reinforced concrete work in (K) Vertical cu.m 4701.97

and Horizontial its upto floor two level. (iteam

code 05024KA,5.8.2 ,S.O.R Ahemdabad City 2023-

Brick work using common burnt clay building

bricks having crushing strength not less

than 35 kg./Sq.Cm. in foundation and plinth

in Cement Mortar 1:5. (1- Cement : 5 -fine

sand)(A) Modular (iteam code 06001AA,6.12

,S.O.R Ahemdabad City 2023-24)

Extra for brick work in super structure above

plinth level upto floor two level (A) Modular

(iteam code 06006A,6.19,S.O.R Ahemdabad City

Extra for brick work in super structure above floor

two level Item No. 1(6.12) (A) Modular (iteam

code 06007A1A,6.2,S.O.R Ahemdabad City 2023-

(i) Half brick masonry in common brunt clay

building bricks having crushing strengthnot less

than 35 Kg/Sq.Cm. in Cement mortar 1:4 (1

39 5.00 Cement:4-coarsesand) in foundationandplinth Sq.m 584.68

(A) Modular (iteam code 06008A1A,6.3,S.O.R

Ahemdabad City 2023-24)

Extra for half brick masonry in super structure

above plinth level upto floor two level. (A)

Modular(iteam code 06010A,6.32,S.O.R

Ahemdabad City 2023-24)

Half brick thick honey- comb brick work

with common burnt clay building bricks having

crushing strength not less than 35 Kg/Sq.Cm.

(ii) In Cement Mortar 1:5 ( 1- Cement : 5 - coarse

sand)(iteam code 0612BA,6.55,S.O.R Ahemdabad

Providing formwork of ordinary timber planking

so as to give a rough finish including

centering shuttering strutting and propping

etc. Height of propping and centering below

supporting floor to ceiling not exceeding 4 M.

and removal of the same for in situ

reinforced concrete and plain concrete work

in. (A) Foundations Footings Bases of Columns etc.

and Mass concrete.(iteam code 09001AA,9.1,S.O.R

Ahemdabad City 2023-24)

Providing formwork of ordinary timber planking

so as to give a rough finish including

centering shuttering strutting and propping

etc. Height of propping and centering below

supporting floor to ceiling not exceeding 4 M.

and removal of the same for in situ

reinforced concrete and plain concrete work

in. (B) Flat surfaces such as soffits of supspened

floors slabs Landings and the like. (1) Floors

etc. upto 200 mm in thickness.(iteam

code09001B1A,9.1,S.O.R Ahemdabad City 2023-

Providing formwork of ordinary timber planking

so as to give a rough finish including

centering shuttering strutting and propping

etc. Height of propping and centering below

supporting floor to ceiling not exceeding 4 M.

44 5.00 and removal of the same for in situ Sqm 270.9

reinforced concrete and plain concrete work

in. (B) Flat surfaces such as soffits of suspended

floor roof slabs Landings and the like. (2) Floors

etc. above 200mm in thickness.(iteam code

09001B2A,9.1,S.O.R Ahemdabad City 2023-24)

Providing formwork of ordinary timber planking

so as to give a rough finish including

centering shuttering strutting and propping

etc. height of propping and centering below

supporting floor to ceiling not exceeding 4 M.

and removal of the same for in situ

reinforced concrete and plain concrete work

in. (C) Vertical surface such as walls (any

thickness) partitions and the like including

attached buttresses & string course & the

like.(iteam code 09001CA,9.1,S.O.R Ahemdabad

Providing formwork of ordinary timber planking

so as to give a rough finish including

centering shuttering strutting and propping

etc. height of propping and centering below

supporting floor to ceiling not exceeding 4 M.

and removal of the same for in situ

reinforced concrete and plain concrete work

in. (G) Columns PillarsPosts and struts. (1)

Square Rectangular Polygonal in plan.(iteam code

09001G1A,9.1,S.O.R Ahemdabad City 2023-24)

Providing formwork of ordinary timber planking

so as to give a rough finish including

centering shuttering strutting and propping

etc. height of propping and centering below

supporting floor to ceiling not exceeding 4 M.

and removal of the same for in situ

reinforced concrete and plain concrete work

in. (G) Columns PillarsPosts and struts.

(2)Circular or curved in Plan.(iteam code

09001G2A,9.1,S.O.R Ahemdabad City 2023-24)

Providing formwork of ordinary timber planking

so as to give a rough finish including

centering shuttering strutting and propping

etc. height of propping and centering below

supporting floor to ceiling not exceeding 4 M.

48 5.00 and removal of the same for in situ Sqm 192.15

reinforced concrete and plain concrete work

in. (H) (1) Sides and soffits of Beams Beam

Haunchings cantilevers Girders Bressumers and

Lintels not exceeding 1 M. in Depth.(iteam code

09001H1A,9.1,S.O.R Ahemdabad City 2023-24)

Providing formwork of ordinary timber planking

so as to give a rough finish including

centering shuttering strutting and propping

etc. height of propping and centering below

supporting floor to ceiling not exceeding 4 M.

49 5.00 and removal of the same for in situ Sqm 259.88

reinforced concrete and plain concrete work

in. (H) (2) Sides and soffits of Beams Beam

Haunchings canti-levers Girders Bressumers and

Lintels exceeding 1M.in Depth.(iteam code

09001H2A,9.1,S.O.R Ahemdabad City 2023-24)

Providing formwork of ordinary timber planking

so as to give a rough finish including

centering shuttering strutting and propping

etc. height of propping and centering below

supporting floor to ceiling not exceeding 4 M.

and removal of the same for in situ

reinforced concrete and plain concrete work

in. (I) Edges of slabs and Breaks in floors and

walls.(iteam code 09001IA,9.1,S.O.R Ahemdabad

Providing formwork of ordinary timber planking

so as to give a rough finish including

centering shuttering strutting and propping

etc. height of propping and centering below

supporting floor to ceiling not exceeding 4 M.

51 5.00 and removal of the same for in situ Sqm 604.8

reinforced concrete and plain concrete work

in. (K) Small surfaceassuch as cantiever

brackets and ends of steps caps and basses

to pilasters and Columns and the like.(iteam code

09001KA,9.1,S.O.R Ahemdabad City 2023-24)

Providing formwork of ordinary timber planking

so as to give a rough finish including

centering shuttering strutting and propping

etc. height of propping and centering below

supporting floor to ceiling not exceeding 4 M.

and removal of the same for in situ

reinforced concrete and plain concrete work

in. (L) Chullah Hoods, weather shades

Chhajjas Corbels etc. including edges.(iteam code

09001LA,9.1,S.O.R Ahemdabad City 2023-24)

Providing formwork of ordinary timber planking

so as to give a rough finish including

centering shuttering strutting and propping

etc. height of propping and centering below

supporting floor to ceiling not exceeding 4 M.

53 5.00 and removal of the same for in situ Sqm 242.55

reinforced concrete and plain concrete work

in. (M) Staircase with sloping or stepped

soffits including risers and stringers

excluding landing.(iteam code 09001MA,9.1,S.O.R

Ahemdabad City 2023-24)

Providing formwork of ordinary timber planking

so as to give a rough finish including

centering shuttering strutting and propping

etc. height of propping and centering below

supporting floor to ceiling not exceeding 4 M.

and removal of the same for in situ

reinforced concrete and plain concrete work

in. (Q) Vertical fins and vertical sun

breakers.(iteam code 09001QA,9.1,S.O.R

Ahemdabad City 2023-24)

Extra for additional height of propping

and centering where the height of

propping and centering exceeds 4 .O M between

supporting floor to ceiling including temporary

brick or stone pillars for supporting as required.

(i)Height more than 4.0 M.and upto 5.0 M.(iteam

code 09002AA,9.1,S.O.R Ahemdabad City 2023-24)

Providing and fixing 35 mm thick shutters

for Doors, windows and clear story windows

including anodised alluminium butt hinges with

necessary screws. (A) Indian Teak Wood (ii) Fully

Glazed.(iteam code 10004BA,10.12,S.O.R

Ahemdabad City 2023-24)

Providing and fixing in position collapsible

steel shutters with vertical channels 20 x 10 x

2 mm braced with flat iron diagonals 20 x 5 mm

size with top and bottom rails of T_rin 40x

57 2.00 x 6 mm with 38mm dia, steel pulleys complete Smt. 5391.23

with bolts, nuts, locking arrangements, stoppers

handles including applying a priming coat of red

lead paint.(iteam code 11003A,11.6,S.O.R

Ahemdabad City 2023-24)

Providing and laying 40mm thick marble

chips flooring rubbed and polished (I.E.

terrazo) to granolithic finish with under layer

30mm thick cement concrete 1:2:4 (1-Cement:2-

coarse sand :4- graded stone aggregate 10 mm

and down gauge) and top layer 10mm thick with

white, black or white and blak marble cihps of

required sizes from 1mm to 4mm nominal size

laid in cement marble powder mix 3:1 (3-Cement :

1-Marble powder by weight) in proportion of

4:7 (4-Cement :7-marble chips by volume) (A)

Dark shade pigment with ordinary cement (In

top layer only)(iteam code 14001AA,14.2,S.O.R

Ahemdabad City 2023-24)

Providing and laying Vitrified tiles 8 to 10 mm

thick, 36'' x 36'' in flooring treads of steps

and landing laid on a bed of 12mm thick cement

59 40.00 mortar 1:3 (1- cement : 3-coarse sand ) Sqm 1469.91

finishing with flush pointing in white

cement.(iteam code 14008DA,14.29,S.O.R

Ahemdabad City 2023-24)

P & L 24" x 24" vitrified 8 mm thick tile flooring

over 20 mm (average) base of cement mortar

1:6 ( 1 cement: 6 coarse sand) on new surface or

fixing on existing flooring by adhesive

material including dismentaling of existing

flooring and jointed with color cement slurry

including finised with flush pointing &

cleaning the surface etc. complete for light

shade(iteam code 14022A,S.O.R Ahemdabad City

Providing and laying white glazed tiles 6mm thick

in flooring treads of steps and landing laid on a

bed of 12mm thick cement mortar 1:3 (1-

cement : 3- coarse sand ) finishing with flush

pointing in white cement.(iteam code

14008AA,14.29,S.O.R Ahemdabad City 2023-24)

Providing and laying white glazed tiles 6mm thick

in skrting risers of steps and dedo on 10mm

thick cement plaster 1:3 (1-cement : 3-coarse

sand) and jointed with white cement slurry(iteam

code 14009AA,14.32,S.O.R Ahemdabad City 2023-

Providing and laying coloured glazed tiles of the

size 300 mm x 200 mm x 8 mm / 300 mm x

mm x 8 mm in skirting, risers of steps and dedo on

63 40.00 10 mm. thick cement plaster 1:3 (1 cement : 3 Sqm 1426.95

coarse sand) & jointed with white cement

slurry.(iteam code 14036,S.O.R Ahemdabad City

Providing and laying marble stone slab flooring

over 20mm (average)base of cement mortar

1:6 (1- cement : 6 coarse sand) or L.M. 1:1.5(1-

64 30.00 lime putty : 1.5 - coarse sand) laid and jointed with Sqm 2194.63

gray cement slurry including rubbing and polishing

complete. (A) Marble slab 25mm thick(iteam code

14011A,14.36,S.O.R Ahemdabad City 2023-24)

Providing and laying polished Kota stone

slab flooring over 20mm (Average) thick base of

cement mortar 1:6 (1-cement : 6-coarse sand) or

L.M. 1.1.5 (1-Lime putty :1.5 - coarse sand)

65 20.00 laid over and jointed with grey cement slurry Sqm 982.83

mixed with pigment to match the shade of slab

including rubbing and polishing etc. complete. (A)

25mm thick (iteam code 14012AA,14.43,S.O.R

Ahemdabad City 2023-24)

Providing corrugated G.I. sheet of class-3

roofing fixed with glavanished iron J or L

Hooks, Bolts and nuts 8mm diameter with

bitumen and G.I. limpet washer or G.I. limpet

washer. filled with white lead complete excluding

the cost of purlins, Rafters and Trusses.(1)

mm thick sheet.(iteam code 15001A,15.1,S.O.R

Ahemdabad City 2023-24)

Providing valleys 900mm overall in plain

1.6mm thick G.I. sheet fixed with G.I. J or L Hooks,

Bolts and nuts glavanised iron J or L Hooks

Bolts and nuts 8mm dia G.I. Limpet and

bitumen washers complete.(iteam code

15003A,15.8,S.O.R Ahemdabad City 2023-24)

Providing 15mm thick cement plaster in single

coat on Rough (Similar)side of single or half

brick walls for interior plastering upto floor

two level and finished even and smooth in (iii)

Cement mortar 1:6 (1-cement:6-sand)(iteam

code17002C,17.6,S.O.R Ahemdabad City 2023-24)

Providing 20mm thick cement plaster in single

coat on single or half brick walls for interior

plastering upto floor two level and finished even

and smooth in (iii) Cement mortar 1:6 (1-

cement:6-sand)(iteam code 17003C,17.61,S.O.R

Ahemdabad City 2023-24)

White washing with lime on wall surface (two

coats) to give an even shade including

thoroughly booming the surface to remove

all dirt, dust; mortar drops and other foreign

matter.(iteam code18001,18.11,S.O.R Ahemdabad

Removing dry or oil bound distemper by a washing

and scraping and sand papering the wall

surface smooth including necessary repairs to

complete.(iteam code18014,18.33,S.O.R

Ahemdabad City 2023-24)

Distempering with dry distemper of

approved brand and manufacture (two coats) and

of required shade on wall surfaces of given an

even shade, over and including a priming coat

of whiting after thoroughly brooming the

surface free from mortar dropping and other

foreign matter.(iteam code 18016,18.38,S.O.R

Ahemdabad City 2023-24)

Finishing wall with water proofing cement paint

of on wall surfaces (Two coats) to give an

approved brand and manufacture and of

73 1000.00 required shape even shade after thoroughly Sqm 56.87

brushing the surface to remove all dirt and

remains of loose powered materials.(iteam

code 18027,18.51,S.O.R Ahemdabad City 2023-24)

Extra over Item 73 for every subsequent coat

of water proofing cement paint of approved

74 1000.00 brand and manufacture.(iteam code Sqm 31.82

18028,18.53,S.O.R Ahemdabad City 2023-24)

Extra over item 73 for finishing with cement

75 1000.00 paint on ceiling and sloping roofs.(iteam Sqm 6.47

code18029,18.54,S.O.R Ahemdabad City 2023-24)

Wall painting (two coats) with plastic

emulsion paint of approved brand and

manufacture on undecorated wall surface to

give an even shade including throughly

brushing the surface free from mortar

droppings and other foreign matter and sand

papered smooth.(iteam code 18031,18.57,S.O.R

Ahemdabad City 2023-24)

Extra over item 76 for every subsequent coat

of wall painting with plastic emulsion pain of

approved brand.(iteam code 18032,18.59,S.O.R

Ahemdabad City 2023-24)

Extra over item 76 for painting with

plastic emulsion paint of approved brand on

ceilings andmsloping roofs.(iteam code

18033,18.6,S.O.R Ahemdabad City 2023-24)

Painting two coats (excluding priming coat) on

new steel and other metal surface with enamel

paint, brushing, interior to give an even shade

79 400.00 including cleaning the surface an even shade Sqm 86.94

including cleanicn the surface of all dirt, dust

and other foreign matter.(iteam code

19002,19.7,S.O.R Ahemdabad City 2023-24)

Painting one coats (excluding priming coat)

on previously painted steel and other metal

surface with enamel paint, brushing to give an

80 500.00 even shade including cleaning the surface of all Sqm 54.35

dirt, dust and other foreign matter.(iteam code

19003,19.11,S.O.R Ahemdabad City 2023-24)

Painting two coats (excluding priming coat) on

new wood and wood based surface with

ready mixed paint, brushing, oil, gloss, semi

81 500.00 gloss to give and even shade including cleaning Sqm 104.12

of all dust, dirt and other foreign matter sand

papering and stopping.(iteam code

19014,19.77,S.O.R Ahemdabad City 2023-24)

Varnishing two coats (excluding priming coat)

on new wood and wood based surface under

coating with flatting varnish and finished coat

with varnish to give an even surface including

cleaning the surface of all dirt, dust and sand

papering so as to produce a smooth dry

surface.(iteam code 19015,19.84,S.O.R

Ahemdabad City 2023-24)

Extra over Above item 82 for every subsequent

83 500.00 coat of varnish.(iteam code 19016,19.86,S.O.R Sqm 30.68

Ahemdabad City 2023-24)

Applying two coats of putty & two coats of

primer of approved brand and manufacture on

new wall surface to give an even shade including

84 500.00 thoroughly brushing the surface free from mortar sqm 40.19

dropping and other foreign matter and sand

papered smooth.(iteam code 19032,S.O.R

Ahemdabad City 2023-24)

Demolition and disposal of unserviceable

materials with all lead and lift.(i) Lime

concrete.(iteam code 20001B,20.1,S.O.R

Ahemdabad City 2023-24)

Demolition including stacking of

serviceable materilas and disposal of

86 15.00 unserviceable materials with all lead and lift. (i) cu.m 1047.38

R.C.C. work(iteam code 20002,20.3,S.O.R

Ahemdabad City 2023-24)

Demolition of Brick work and stone

masonry including stacking of serviceable

materilas and disposal of unserviceable materials

with all lead and lift. (i) In Lime Mortar.(iteam

code 20003A,20.11,S.O.R Ahemdabad City 2023-

Demolition of Brick work and stone

masonry including stacking of serviceable

materilas and disposal of unserviceable materials

with all lead and lift.(ii) In Cement Mortar.(iteam

code 20003B,20.11,S.O.R Ahemdabad City 2023-

Dismentaling tiled of stone floors laid in

mortar including stacking of serviceable

89 50.00 materilas and disposal of unserviceable materials Sqm 47.25

with all lead and lift.(iteam code

20005,20.23,S.O.R Ahemdabad City 2023-24)

Dismentaling of wooden floors including stacking

of serviceable materilas and disposal of

90 50.00 unserviceable materials with all lead and Sqm 70.88

lift.(iteam code 20006,20.25,S.O.R Ahemdabad

Dismentaling of sheet roofing including

ridges, Hips, Valleys, Gutters etc. stacking of

serviceable materilas and disposal of

unserviceable materials with all lead and lift.(i)

G.I.sheet roofing.(iteam code 20007A,20.27,S.O.R

Ahemdabad City 2023-24)

Dismentaling of sheet roofing including

ridges, Hips, Valleys, Gutters etc. stacking of

serviceable materilas and disposal of

unserviceable materials with all lead and lift.(ii)

A.C. sheet roofing.(iteam code 20007B,20.27,S.O.R

Ahemdabad City 2023-24)

Dismentling doors, windows, ventilators etc.

(wood or steel) shutters including chowkhats

architraves, holdfasts and other attachment etc.

93 53.00 complete and stacking them within all lead Each 185.85

and lift.(i) Not exceeding 3 Sq.M. in area.(iteam

code 20013A,20.49,S.O.R Ahemdabad City 2023-

Dismentling C.I. pipes G.S.W.pipes abd A.C.

rain water pipes with fittings and clamps

94 30.00 including stacking the materials with all lead and Rmt 74.03

lift ( for any dia, of pipe)(iteam code

20015,20.56,S.O.R Ahemdabad City 2023-24)

Dismantling santtary fittings like wash basin .

W.C. pan Indian and European type, flushing

95 40.00 tank etc. including stacking the materials with Each 401.63

all lead and lift.(iteam code 20016,S.O.R

Ahemdabad City 2023-24)

Dismentling barbed wire in fencing

including making rolls and also including

dismentling fencing posts including all earth work

concrete in base and making good the disturbed

96 84.00 ground stacking useful materials as directed and Rmt 66.15

disposing as directed and disposing of the

unserviceable materials with all lead and

lift.(iteam code 20014,20.51,S.O.R Ahemdabad

Providing and fixing 1.20 Metre high fencing

with 2.0 Metre long M.S. Angle posts 40mm x

mm x6 mm and oil painting 3 coats fixed at

2.5 Mt,C/c. with five Horizontan lines and two

diagonals of galvanised steel barbed wire

weighting 9.38 Kg. per 100 Metre, strained and

fixed to posts with G.I,staples including fixing

the postsin ground with 0.5 M x 0.5.M x

M. block in C.C1:5:10 etc complete.(iteam code

22001,22.2,S.O.R Ahemdabad City 2023-24)

Providing and fixing to wall, ceiling and

floor galvanised Mild steel tubes (Medium

grade) of the following nominal bore, tube

fitting and clamps including making good the

wall ceiling and floor.(A) 15mm(iteam code

23001AA,23.2,S.O.R Ahemdabad City 2023-24)

Providing and fixing to wall, ceiling and

floor galvanised Mild steel tubes (Medium

grade) of the following nominal bore, tube

fitting and clamps including making good the

wall ceiling and floor.(B) 20mm(iteam code

23001BA,23.2,S.O.R Ahemdabad City 2023-24)

Providing and fixing to wall, ceiling and

floor galvanised Mild steel tubes (Medium

grade) of the following nominal bore, tube

fitting and clamps including making good the

wall ceiling and floor.(C) 25mm(iteam code

23001CA,23.2,S.O.R Ahemdabad City 2023-24)

Providing and fixing to wall ceiling and floor

Kg. F/Cm2 working pressure poluthene pipes of

the following outside Dia. Low densidy,

101 40.00 complete with special falnge compression Rmt 78.12

type fittings, wall clipsetc. including making

good the wall ceiling and floor.(A) 20mm(iteam

code 23004A,23.8,S.O.R Ahemdabad City 2023-24)

Providing and fixing to wall ceiling and floor

Kg. F/Cm2 working pressure poluthene pipes of

the following outside Dia. Low densidy,

102 50.00 complete with special falnge compression Rmt 100.49

type fittings, wall clipsetc. including making

good the wall ceiling and floor.(B) 25mm(iteam

code 23004B,23.8,S.O.R Ahemdabad City 2023-24)

Providing and fixing to wall ceiling and floor

Kg. F/Cm2 working pressure poluthene pipes of

the following outside Dia. Low densidy,

103 50.00 complete with special falnge compression Rmt 116.4

type fittings, wall clipsetc. including making

good the wall ceiling and floor.(C) 32mm(iteam

code 23004C,23.8,S.O.R Ahemdabad City 2023-24)

Providing and fixing to wall ceiling and floor

Kg. F/Cm2 working pressure polythene pipes of

the following outside Dia. Low densidy,

104 40.00 complete with special falnge compression Rmt 274.68

type fittings, wall clipsetc. including making

good the wall ceiling and floor.(F) 75mm(iteam

code 23004F,23.8,S.O.R Ahemdabad City 2023-24)

Providing and fixing to wall ceiling and floor

Kg. F/Cm2 working pressure poluthene pipes of

the following outside Dia. Low densidy,

105 40.00 complete with special falnge compression Rmt 332.91

type fittings, wall clipsetc. including making

good the wall ceiling and floor.(G)110 mm(iteam

code 23004G,23.8,S.O.R Ahemdabad City 2023-24)

Providing and fixing cast iron spigot and socket

106 20.00 waste and ventilating pipes of the Rmt 732.09

following nominal size.(B) 75mm dia.(iteam code

23005BA,23.79,S.O.R Ahemdabad City 2023-24)

Providing and fixing cast iron spigot and socket

soil, waste and ventilating pipes of the

107 20.00 following nominal size.(C) 100mm dia.(iteam code Rmt 881.64

23005CA,23.79,S.O.R Ahemdabad City 2023-24)

Providing and fixing in position cowel went

108 10.00 to pipes.(B) 75mm dia.(iteam code 23006B,S.O.R Each 385.88

Ahemdabad City 2023-24)

Providing and fixing in position cowel went

109 10.00 to pipes.(C) 100mm dia(iteam code 23006C,S.O.R Each 496.9

Ahemdabad City 2023-24)

Providing and fixing cast iron (Spun) Nahni

trap of the following nominal diameter of

self cleaning design with C.I. screaed down or

110 10.00 higned grating including cost of cutting and Each 600.08

making good the walls and floor 100mm inlet and

50mm outlet.(C) 100mm dia.(iteam code

23008,23.857,S.O.R Ahemdabad City 2023-24)

Providing and fixing water closet squatting

Pan (Indian type W.C. Pan) size 580mm

(Earthwork, bed concrete, foot reste and trap

111 10.00 to be measured and paid for separately) (A) Each 926.1

Vitreous China.(I) Long pattern = White

colour(iteam code 23009,23.111,S.O.R

Ahemdabad City 2023-24)

Providing and fixing wsh down water

closet (European type, W.C. Pan) with integral P or

S trap including jointing the trap with soil pipe in

Cement Mortar 1:1 (1-Cement : 1-fine sand) (Seal

and cover to be measured and paid for

separately)(A) vitreous China Pattern :(i) in white

colour(iteam code 23010,23.112,S.O.R

Ahemdabad City 2023-24)

Providing and fixing 100mm size P or S trap

for water closet squatting pan including jointing

the trap with the pan and soil pipe in cement

Mortar 1:1 (1-Cement : 1-Fine sand)(A) Vitreous

China.(iteam code 23011,23.113,S.O.R

Ahemdabad City 2023-24)

Providing and fixing wash basin with single hole

for pillar tap with C.I. or M.S. brackets painted

white including sutting holes and making good

114 10.00 the same but excluding fittings.(A) Vitreous Each 1400.18

China:(ii) Flat Back washbasin 550 mm x v

400mm size. (i) In white colour.(iteam code

23018,23.127,S.O.R Ahemdabad City 2023-24)

Providing and fixing 600mm x 450mm bevelled

edge mirrror of superior glass mounted on

6mm thick A.C. sheet or plywood sheet and

fixing to wooden pluge with C.P. brass screws

and washers.(iteam code 23024,23.143,S.O.R

Ahemdabad City 2023-24)

Providing and fixing C.P. brass towel rail

comlete with C.P. brass brackets fixed to wooden

116 10.00 plugs with C.P. brass scews.(B) 600mm x 20mm Each 597.22

size.(iteam code 23025,23.144,S.O.R Ahemdabad

Providing and fixing screw down bib taps

of following size.(A) Brass screw down bib tap

117 10.00 polished bright. (i) 15mm dia.(iteam code Each 184.98

23028A1,23.92,S.O.R Ahemdabad City 2023-24)

Providing and fixing screw down bib taps

of following size.(B) Brass chromium plated

118 10.00 screws down Bib Tap. (i) 15mm dia.(iteam code Each 184.98

23028B1,23.92,S.O.R Ahemdabad City 2023-24)

Providing and fixing brass screw down stop

15mm dia.(iteam code 23030A,23.96,S.O.R

Ahemdabad City 2023-24)

Providing and fixing Gun metal check or non-

fullway wheel valve.(A) 15mm dia.(iteam code

23028A1,23.92,S.O.R Ahemdabad City 2023-24)

Providing and fixing Gun metal check or non-

fullway wheel valve.(B) 20mm dia.(iteam code

23031B,23.99,S.O.R Ahemdabad City 2023-24)

Providing and fixing chromium plated brass

half trun flush cock of approved quality

122 30.00 including fixing in pipe line etc. complete.(i) 20mm Each 252.26

dia.(iteam code 23032A,S.O.R Ahemdabad City

Providing and fixing chromium plated brass

half trun flush cock of approved quality

123 25.00 including fixing in pipe line etc. complete.(ii) Each 261.16

25mm dia.(iteam code 23032B,S.O.R Ahemdabad

Providing and fixing Urinal or approved

quality including conecting the Urinal with waste

pipe , tap etc. complete.(A) White earthenware

flat back or corner type size 430mm x 260mm x

350mm.(iteam code 23033,23.122,S.O.R

Ahemdabad City 2023-24)

Providing and fixing Urinal of approved

quality including connection with trap and with

integral longitudinal flush pipe.(A) Squating

plate pattern white earthenware 550mm x

300mm.(iteam code 23034,23.124,S.O.R

Ahemdabad City 2023-24)

Providing and fixing ball cock of approved.

quality as directed.(A) Copper Metal (i) 25mm

dia.(iteam code 23037A1,S.O.R Ahemdabad City

Providing and fixing ball cock of approved.

quality as directed.(A) Copper Metal (ii) 50mm

dia.(iteam code 23037A2,S.O.R Ahemdabad City

Providing and fixing ball cock of approved.

as directed.(B) Abonite (i) 25mm dia.(iteam code

23037B1,S.O.R Ahemdabad City 2023-24)

Providing and fixing ball cock of approved.

qualityas directed.(B) Abonite (ii) 50mm

dia.(iteam code 23037B2,S.O.R Ahemdabad City

Providing and fixing plastic seat and cover for

wash down water closer with C.P. brass

130 10.00 hinges and rubber buffers. (B) Black plastic seal Each 288.45

and cover.(iteam code 23017,23.121,S.O.R

Ahemdabad City 2023-24)

Providing and fixing Rubber plug for sink or

131 10.00 wash basin.(iteam code 23035 ,23.134,S.O.R Each 16.98

Ahemdabad City 2023-24)

Providing and fixing concealed center point to

wall ceiling & floor CPVC (SDR 13.5) PIPE having

National Sanitation Foundation (NSF) seal for

potable water of following dia. nominal bore

tube fittings and clamps including making good

the wall, ceiling and floor etc. complete.[A]

mm.(iteam code 23055 ,S.O.R Ahemdabad City

Providing and fixing concealed center point to

wall ceiling & floor CPVC (SDR 13.5) PIPE having

National Sanitation Foundation (NSF) seal for

potable water of following dia. nominal bore

tube fittings and clamps including making good

the wall, ceiling and floor etc. complete. [B]

mm.(iteam code 23056 ,S.O.R Ahemdabad City

Providing and fixing concealed center point to

wall ceiling & floor CPVC (SDR 13.5) PIPE having

National Sanitation Foundation (NSF) seal for

potable water of following dia. nominal bore

tube fittings and clamps including making good

the wall, ceiling and floor etc. complete. [C]

mm.(iteam code 23057,S.O.R Ahemdabad City

Providing and fixing concealed center point to wall

Ceiling & floor CPVC (SDR13.5) PIPE having

National Sanitation Foundation(NSF) seal for

135 50.00 potable water of following dia. nominal bore tube Rmt 330.36

fittings and clamps including making good the

wall, ceiling and floor etc. complete. [D] 32mm.

Providing and fixing concealed center point to wall

ceiling & floor CPVC (SDR13.5) PIPE having

National Sanitation Foundation(NSF)seal for

potable water of following dia. nominal bore tube

fittings and clamps including making good the

wall, ceiling and floor etc. complete. [E]

40mm(iteam code 23059,S.O.R Ahemdabad City

Providing and fixing concealed center point to wall

ceiling & floor CPVC(SDR13.5) PIPE having National

Sanitation Foundation (NSF)seal for potable water

137 20.00 of following dia. nominal bore tube fittings and Rmt 647.3

clamps including making good the wall, ceiling and

floor etc. complete. [F] 50mm(iteam code

23060,S.O.R Ahemdabad City 2023-24)

Providing laying and jointing in true line and

level 15mm dia. U.P.V.C. Pipe ( SCH- 40) for

cold water including fittings as approved by

Engineer In Charge. Pipe shall be fixed on the

wall with the help of clamp at every two

138 20.00 metre C/C or shall be concealed as directed Rmt 71.93

including necessary fittings etc. including testing

of pipe and joints and fixing the same with

adhesive solvent, including cost of all

materials.(iteam code 23061,S.O.R Ahemdabad

Providing laying and jointing in true line and

level 25mm dia. U.P.V.C. Pipe ( SCH- 40) for

cold water including fittings as approved by

Engineer In Charge. Pipe shall be fixed on the

wall with the help of clamp at every two

139 20.00 metre C/C or shall be concealed as directed Rmt 90.93

including necessary fittings etc. including testing

of pipe and joints and fixing the same with

adhesive solvent, including cost of all

materials.(iteam code 23062,S.O.R Ahemdabad

Providing laying and jointing in true line and

level 32mm dia. U.P.V.C. Pipe ( SCH- 40) for

cold water including fittings as approved by

Engineer In Charge. Pipe shall be fixed on the

wall with the help of clamp at every two

140 20.00 metre C/C or shall be concealed as directed Rmt 117.97

including necessary fittings etc. including testing

of pipe and joints and fixing the same with

adhesive solvent, including cost of all

materials.(iteam code 23063,S.O.R Ahemdabad

Providing laying and jointing in true line and level

40 mm dia. U.P.V.C. Pipe(SCH-40) for cold water

including fittings as approved by Engineer In

Charge. Pipe shall be fixed on the wall with the

help of clamp at every two metre C/C or shall be

concealed as directed including necessary fittings

etc. including testing of pipe and joints and fixing

the same with adhesive solvent, including cost of

all materials.(iteam code 23064,S.O.R Ahemdabad

Providing layingand jointing in true line and level

50 mm dia. U.P.V.C. Pipe(SCH-40) for cold water

including fittings as approved by Engineer In

Charge. Pipe shall be fixed on the wall with the

help of clamp at every two metre C/C or shall be

concealed as directed including necessary fittings

etc. including testing of pipe and joints and fixing

the same with adhesive solvent, including cost of

all materials.(iteam code 23065,S.O.R Ahemdabad

Providing and fixing S.W. gully trap with C.I.

grating brick masonry chamber and water tight

C.I. cover with frame of 300mm x 300mm size

143 10.00 (inside) with standard weight.(i) Square Each 1279.4

mouth traps. (A) 100mm x 100mm size P

type.(iteam code 24006AA,24.19,S.O.R

Ahemdabad City 2023-24)

Providing cement vata (10cm. x 10 cm. size)

quarter round in cement mortar 1:1 including neat

144 50.00 cement finishing, watering etc. complete.(iteam Rmt 23.45

code 17015,S.O.R Ahemdabad City 2023-24)

Providing and fixing 30mm thick factory

made moulded door shutter wood free

consisting of frame made out of M.S. tubes of

gauge thickness and size of 25mm x 25mm

for stiles, top and bottom rails, M.S. frame

shall have a coat of steel primers. The inner

panel shall consist of 25mm thick High Density

EPS conforming to IS 4671-1984 bonded with

2mm thick termite proof, water proof and fire

resistant moulded PVC sheet with 2,4,6 raised

panel design in different plain and /or prelim

colours after routing the moulded design on

one side and 2mm plain and/or prelim PVC

sheet on other side of the EPS. The edges of

panel to be sealed with lipping of 10mm wide

PVC sheet batton (made by sticking 2 PVC rigid

foam sheets of 5mm thickness using PVC

solvent cement) and stiles 25mm (5mm x 5)

thick and 30mm width PVC sheet fitted along M.S.

tube for lock provision and for lock height 5mm

thick PVC sheet of size 150mm x 100mm

fixed with upper and lower face of inner side

of EPS panel etc. complete as per direction of

Engineer in charge manufacture’s specification

Providing and fixing factory made polyvinyl

chioride (PVC) door frame of the size 50 x 47 mm

with a wall thickness of 5mm, made out of

extruded 5mm rigid PVC foam sheet, mitre out

of two corners and joined with 2nos. of

150mm long brackets of 15 x 15mm M.s.

Square tubes. The two vertical door profiles are

to be reinforced with 19 x 19 mm m.s. square

tube of 19 gauge, EPDM rubber gasket

146 30.00 weather seal to be provided through out the sqm 314.88

frame. The door frame shal be fixed to the

wall using 65/100 mm long M.S. screws through

the frame by using PVC fasteners. A

miniumum of 4 nos. os screws to be provided

for each vertical members and minium 2 nos.

for horizontal members etc. complete as per

manufactures specification and direction of

Engineer in charge.(iteam code 10050,S.O.R

Ahemdabad City 2023-24)

Providing and fixing M.S. grills of required

pattern to wooden frames of windows etc. with

M.S. flats at required spacings and frame

147 100.00 alround, square or round bars with round headed kg 100.17

bolts and nuts or by screws (A) Plain Grill.(iteam

code 10025AA,10.1,S.O.R Ahemdabad City 2023-

Providing and fixing M.S. grills of required

pattern to wooden frames of windows etc. with

M.S. flats at required spacings and frame

148 20.00 alround, square or round bars with round headed kg 143.64

bolts and nuts or by screws. (B) ORNAMENTAL

GRILL(iteam code 10025BA,10.1,S.O.R Ahemdabad

Carring out plinth treatment to post construction /

existing structure by spraying chemical solution

for termite control treatment including

labour and material consistment with I.S.I

specification. Using Chlordene and

Chiorpurfiles 20 EC. As Per 6131_paret-II

Consentration Weight one percent is

recommended i.e one litre 20 EC chemical

emulsion with 19 liter give 1 % concrentration

inclusive of one litre chemical emulsion

appication at the rate of 5 Litre chemical

/ Sqm of surface is recommended as per

I.S(iteam code 22007,S.O.R Ahemdabad City 2023-

Carrying out timber treatment to all wood

work including drilling holes and spraying oil

based chemical solution on surface of timber

work for termite control including labor and

material etc. complete. Using Chlorpyriphos20

EC as per 6313 2013 Part III (1%

concentration by mass) is recommended one

litre chemical emulsion diluted with 19 liters

of kerosene. Total diluted concentration

will be 20 liters inclusive of 1 liter chemical

emulsion application in drilled holes and 0.75 /

Litre chemical per one Sqmt two coat on wood

surface not protected by paint or varnish.(iteam

code 22005,S.O.R Ahemdabad City 2023-24)

Providing and fixing Gun metal check or non-

return fullway wheel valve.(B) 20mm dia.(iteam

code 23031B,23.99,S.O.R Ahemdabad City 2023-

Providing and fixing Gun metal check or non-

return fullway wheel valve.(C) 25mm dia.(iteam

code 23031C,23.99,S.O.R Ahemdabad City 2023-

Providing and fixing Gun metal check or non-

return fullway wheel valve.(D) 32mm dia.(iteam

code 23031D,23.99,S.O.R Ahemdabad City 2023-

Providing and fixing Gun metal check or non-

return fullway wheel valve.(E) 40mm dia.(iteam

code 23031E,23.99,S.O.R Ahemdabad City 2023-

Supplying nece hardware, G.I.Fittings etc.comp of

155 app. Quality as under

a 10.00 S.S. Stopper 30 Cm long of ASIS 304 No. 180.51

b 10.00 S.S. Stopper 20 Cm long of ASIS 304 No. 126.27

c 10.00 S.S. Aldrop 20 Cm long of ASIS 304 Grade No. 216.1

d 10.00 S.S. Aldrop 25 Cm long of ASIS 304 Grade No. 324.58

e 10.00 S.S. Aldrop 30 Cm long of ASIS 304 Grade No. 396.61

S.S. Handle for door/ window 10 Cm size of ASIS

g 10.00 Ball cock of copper 25 mm diameter Each 112.71

h 10.00 Ball cock of copper 50 mm diameter Each 161.02

i 10.00 Ball cock of abonite 25 mm diameter Each 87.29

j 10.00 Ball cock of abonite 50 mm diameter Each 116.95

k 5.00 Labour charges - Carpentar 1st Class Each 725

l 5.00 Labour charges - Carpentar 2nd Class Each 638

m 5.00 Labour charges - Plumber (Fitter) Each 697

n 5.00 Labour charges - Plumber(Fitter)Assist Each 570

Providing and fixing window having

extruded aluminum Colour anodized section

frame main outer size 63.50 x 38.10 x 1.95 mm,@

Wt 1.094 Kg / Rmt, horizontal two track member

size 61.85 mm x 31.75 mm x 1.20mm @ wt.of

0.695 Kg/mt, vertical member of size 61.85 mm x

31.75mm x 1.30 mm @ wt.of 0.659 Kg/mt with

sliding shutters of horizontal member size 40mm

156 30.00 x 18mm x 1.29mm @ wt.of 0.456Kg/mt, vertical Sqm 1696.73

member of size 40mm x 18mm x 1.29mm @ wt.of

0.456Kg/mt, @ Wt. 0.457 Kg/mt with 5 mm thick

transparent bronze colour tinted float glass

with powder coated aluminum fittings and

fixtures and transparent silicon sealant glass

fixing to frame as per details etc complete

for window.(iteam code 11028,S.O.R Ahemdabad

Providing and fixing standared extruded

of alluminium section of size 63.50 x 38.10 x

mm @ Wt 1.094Kg / Rmt with colour

anodized alluminium frame with 5 mm thick

157 30.00 transparent bronze colour tinted float glass Sqm 1288.93

with colour anodized alluminium frame for

ventilation with 5 mm thick frosted glass as

details etc complete for.window(iteam code

11029,S.O.R Ahemdabad City 2023-24)

Providing and fixing window having

extruded aluminum Colour anodized section

frame main outer size 127mm x 38.10mm x

1.35mm @wt. 1.384kg/m, horizontal Four

track member size 122.20mm x 31.75mm x

1.10mm@ wt 1.205 kg/m, vertical member of

size 122.20mm x 31.75mm x 1.50mm @1.398

kg/mt with sliding shutters of horizontal

158 50.00 member size 40mm x 18mm x 1.29mm@ Sqm 2119.14

0.456kg/mt ,vertical member of size 40mm x

18mm x 1.29mm @ 0.456 kg/mt with

mm thick transparent bronze colour tinted

float glass with powder coated aluminum

fittings and fixtures and transparent silicon

sealant glass fixing to frame as per details etc

complete for window.(iteam code 11026,S.O.R

Ahemdabad City 2023-24)

Providing and fixing standared extruded

of alluminium section of size 63.50 x 38.10 x

1.95 mm,@ Wt 1.094Kg / Rmt with colour

159 20.00 anodized alluminium frame with 5 mm thick Sqm 1509.9

transparent bronze colour tinted float glass

as details etc complete for Fix window.(iteam

code 11031,S.O.R Ahemdabad City 2023-24)

Providing and fixing window having

extruded aluminum Colour Powder Coated

section frame main outer size 63.50 x 38.10 x

1.95 mm,@ Wt 1.094 Kg / Rmt, horizontal two

track member size 61.85 mm x 31.75 mm x

1.20mm @ wt.of 0.695 Kg/mt, vertical

member of size 61.85 mm x 31.75mm x

1.30 mm @ wt.of 0.0.659 Kg/mt with sliding

shutters of horizontal member size 40mm x

vertical member of size 40mm x 18mm x 1.29mm

@ wt.of 0.456Kg/mt with 5 mm thick

transparent bronze colour tinted float glass

with powder coated aluminum fittings and

fixtures and transparent silicon sealant glass

fixing to frame as per details etc complete for

window.(iteam code11034,S.O.R Ahemdabad City

Providing and fixing rolling shutters of

approved make made of 80 mm wide M.S. laths

inter-locked together through their entire

length and jointed together at the ends by end

locks mounted on specially designed pipe shaft

161 10.00 with bracket plates, guide channels and Sqm 2718.41

arrangements for inside and outside locking

with push-pull operation complete but excluding

the cost of hood cover and spring. (A) Shutters

having width below 3.5.M.(iteam code

11006A,11.9,S.O.R Ahemdabad City 2023-24)

Providing and fixing 27.5 cm. long wire spring

grade No.2 of approved make for rolling

shutters.(iteam code 11007,11.1,S.O.R

Ahemdabad City 2023-24)

Providing and fixing Hood cover for rolling

shutters (A) Shutters having width below

meters(iteam code 11008A,11.11,S.O.R

Ahemdabad City 2023-24)

Providing and laying Cement concrete 1:5:10

(1- Cement : 5-Fine sand :10-Graded stone

aggregate 40mm nominal size) bedding for

stoneware pipes of following internal

diameters with necessary formwork and

curing complete.(A) 100 mm dia. (112 mm

Ave.bed thickness)(iteam code 24002A,24.2,S.O.R

Ahemdabad City 2023-24)

Providing and laying Cement concrete 1:5:10

(1- Cement : 5-Fine sand :10-Graded stone

aggregate 40mm nominal size) bedding for

stoneware pipes of following internal

diameters with necessary formwork and

curing complete.(B) 150mm dia. (166mm Ave.

bed thickness)(iteam code 24002B,24.20,S.O.R

Ahemdabad City 2023-24)

Constructing brick masonry chamber

for underground C.I. Inspection chamber and

bends with bricks having crushing strength not

less than 35Kg/Cm2 in C.M. 1:5 C.I. cover with

frame (Light duty) 455mm x 610mm intenal

dimensions total weight of cover with frame to

be not less than 38Kg. (Wt. of cover 23 Kg.) and

Wt. of frame 15Kg. ) (R.C.C. top slabe with

166 5.00 1:2:4 mix (1-cement :2- coarse sand :4-graded Each 2903.89

stone aggregate 20mm size) foundation concrete

1:5:10 inside plaster 15mm thick with cement

mortar 1:3 finished smooth with a floating coat

of neat cement on walls and bed concrete

etc. complete.(i) Inside dimensions

455mmx 610mm and 450mm deep for single

pipe line.(iteam code 24016AA,24.44,S.O.R

Ahemdabad City 2023-24)

Extra over items 136 for every additional depth of

0.1M. of part thereof beyond 450mm depth

167 5.00 for Brick masonry chamber.(i) for 455mm x Each 239.99

610mm size.(iteam code 24017A,24.46,S.O.R

Ahemdabad City 2023-24)

RCC Precast M.H.Frame & Cover Manufacture

supply & Delivery at store or at side of work

Precast RCC M200 Frame & Cover Suitable to

drainage M.H. and as per type design & Drawing

including cost of reinforcement M.S. Angles or Flat

, cutting mold work etc.(GWSSB SOR 2021-22)

1 3.00 Frame Suitable for 50 Cm opening of MH No. 1255

2 3.00 Cover Suitable for 50Cm Opening Of MH No 1314

1 3.00 Frame Suitable for 50 Cm opening of MH No. 1120

2 3.00 Cover Suitable for 50Cm Opening Of MH No 1194

c House connection Chamber Light Duty

1 3.00 Frame No. 911

Providing and fixing pre-cast concrete kerb stone

of gray cement based concrete block

30cm length,30cm height and 15cm thick of

M200 grade concret as per approved design

and including excavation for fixing in proper

line and level,filling the joint with C:M 1:3

(1cement:3fine sand) etc complete.(iteam code

14023A,S.O.R Ahemdabad City 2023-24)

Providing and fixing pre-cast Rubber Dye / steel

Dye inter locking concrete block 60mm thick with

grade of concrete M300 pnumatic compressed /

vibrated mechanically and as per

approved design Confirming to IS 15658 :

including 35 mm Sand layer for levelling and

filling the joint with sand in proper line and

level as per guidlines of IRC : SP 63- 2018 etc.

Complete. (iteam code 14033,S.O.R Ahemdabad

Providing and fixing eco-friendly light

weight calcium silicate false ceiling tiles

having Tegular edge & 15 mm Thick Densified

edges on the Tile Periphery for Extra Strength

The Light weight calcium silicate ceiling tiles

shall have , light reflection 85% non-

combustible as per B.S. 476 part IV, 100%

humidity resistance and also having thermal

conductivity0.043° w/m KC.for the best

thermal Insulation . The Light weight

calcium Silicate tile shall be of approved

texture Fine fissured/ Spintone/Cosmos having

NRC value of 0.5 & Globe having NRC value of

NRC or equivalent of size 595 X 595 mm to be laid

171 30.00 on true horizontal level suspended inter locking Sqm 1632.63

metal grid of hot dipped galvanized steel

sections (galvanizing @120 grams per sqm

including both side) consisting of main ‘T’

runner suitably spaced at joints to get required

length and size of 24X38mm made from

mm thick (minimum) sheet, 1200mm centre

tocentre, and cross ‘T’ of size 24X28mm made out

of 0.33mm (Minimum) sheet spaced 1200mm

along spaced between main ‘T’ at 600mm

centre to centre to form agrid of

1200X600mm and secondary cross ’T’ of

length 600mm and size 24x28mm made of

mm thick (Minimum) sheet(iteam code

16006,S.O.R Ahemdabad City 2023-24)

Providing and fixing false ceiling at all height

including providing and fixing of frame work made

of special sections, power pressed from M.S.

sheets and galvanized with zinc coating of

gms/sqm (both side inclusive) as per IS :

and consisting of angle cleats of size 25 mm wide x

1.6 mm thick with flanges of 27 mm and 37 mm,

at 1200 mm centre to centre, one flange fixed to

the ceiling with dash fastener 12.5 mm dia x

mm long with 6 mm dia bolts, other flange of cleat

fixed to the angle hangers of 25x10x0.50 mm of

required length with nuts & bolts of required size

and other end of angle hanger fixed with

172 30.00 intermediate G.I. channels 45x15x0.9 mm running Sqm 718.57

at the spacing of 1200 mm centre to centre, to

which the ceiling section 0.5 mm thick bottom

wedge of 80 mm with tapered flanges of 26 mm

each having lips of 10.5 mm, at 450 mm centre to

centre, shall be fixed in a direction perpendicular

to G.I. intermediate channel with connecting clips

made out of 2.64 mm dia x 230 mm long G.I. wire

at every junction, including fixing perimeter

channels 0.5 mm thick 27 mm high having flanges

of 20 mm and 30 mm long, the perimeter of

ceiling fixed to wall/partition with the help of rawl

plugs at 450 mm centre, with 25 mm long dry wall

screws @ 230 mm interval, including fixing of

gypsum board to ceiling section and perimeter

channel with the help of dry wall screws of size

x 25 mm at 230 mm c/c, including jointing and

finishing to a flush finish of tapered and square

edges of the board with recommended jointing

compound , jointing tapes , finishing with jointing

compound in 3 layers covering upto 150 mm on

both sides of joint and two coats of primer

suitable for board, all as per manufacturer’s

specification and also including the cost of making

openings for light fittings, grills, diffusers, trap

doors, cutouts made with frame of perimeter

channels suitably fixed, providing additional

sections for strengthening the oenings/cutouts,

Trapdoors all complete as per drawings,

specification and direction of the Engineer in

Charge. Area of cutouts shall not be deducted and

no extra payment shall be considered for

additional sections provided. Only plan area shall

be considered for payment. All curved surfaces,

recesses, waffles and corbellings shall be part of

the false ceiling & flat area in plan shall be

measured for payment. The rates are also

inclusive of necessary scaffolding, tools, tackles

etc. Complete for all floors and height with frame

wherever required for electrical & A.C. fixtures &

grill all as per drawings, specification and direction

of the Engineer in Charge. all as per

manufacturer’s specification and as per drawings,

specification and direction of the Engineer in

Charge. Excluding the cost of painting with :

12.5 mm thick tapered edge gypsum plain board

conforming to IS: 2095- Part I

Dismantling aluminium/ Gypsum partitions, doors,

windows, fixed glazing and false ceiling including

173 50.00 disposal of unserviceable surplus material and Sqm 17.68

stacking of serviceable material with all lead as

per instruction of EIC.

PlywoodProviding and fixing in position Marine

Plywood of specified thickness following code IS

710 - 1976 of approved makes as per Interior

design drawing/ Instruction of EIC for all type of

loose and fixed furniture, Panelling, Partition, Bed

head panel etc. The rates are inclusive of all lead

and lift,all floor levels, all heights, all material,

fixing, scaffolding, labour, Wastage etc. complete

in all respects. a)Plywood 19mm th.

Extra over for plastering on ceilings and sofits of

stairs upto floor two level instead of plastering on

walls.(iteam code 17006,17.91,S.O.R Ahemdabad

20 mm thick sand faced cement plaster on walls

upto height 10 metres above ground level

consisting of 12 mm thick backing coat of C.M.1:3

176 15.00 (1-cement:3-sand)and8mmthickfinishingcoatof Sqm 297.68

C.M. 1:1 (1-cement : 1-sand) etc. complete.(iteam

code 17009,17.95,S.O.R Ahemdabad City 2023-24)

Cutting out cracks of roof terrace to V- section

cleaning out, wetting , grouting with cement and

177 50.00 sand slurry 1:3 (1-cement 3-sand )(iteam code Rmt 64.58

221002A,21.23,S.O.R Ahemdabad City 2023-24)

Conveyance charge of earth, lime, murrum,

building rubbish, manure, garbage, sludge,

excavated rock, fly ash, aggregates of any kind

178 executed outside the road site. Rate also includes

spreading & levelling etc complete. Internal

conveyance above 50 mt done within the work

site is not payable.

20.00 a) Lead From 5 Km to 10 Km. Cmt 78.54

20.00 b) Lead From 10 Km to 15 Km. Cmt 104.65

P/A Tremix with dewartering machine and floater

machine on constructed CC work for finishing the

surface as per requirement. The rate including all

machinaries, labor, loading, unloading,

transportaion etc complete as per direction given

by engineer in charge.

Making 15 mm. Groove in RCC work on road &

180 20.00 filling it with polysulfied selant & finished ot good RMT 30

incl. all labour charges etc. comp.as directed.

Repairing damaged M.H. and rasing M.H. up to

road level incl. removing damaged brick work and

repairing by brick masonry in C.M. 1:5 and plaster

in C.M. 1:3 and fixing C.I. steps and existing MH

sheet cover, removing the debris from MH and

carting the same as directed.

4.00 (A) up to 0.15 mt. (@ Two Coarse) No. 728.82

4.00 (B) up to 0.35mt. (@ Four Coarse) No. 1155.44

4.00 (C) up to 0.65 mt. (@ Seven Coarse) No. 1786.49

Constructing Chamber of following size including

excavation, refilling, BBCC (1:5:10) for foundation,

C.C.Channel (1:2:4), finished 15 mm thick cement

182 plaster inside in CM 1:3, finishing with cement

slurry, Brick masonary in CM 1:5 & excluding the

cost of chamber seat cover etc.completed.

0.60 X 0.45 mt. size Inside Clear, Depth from

0.60 X 0.75 mt. size Inside Clear, Depth from

0.75 X 0.75 mt. size (Inside Clear) Depth from

c 1.00 to 1.20 meter. No. 3905.36

Constructing Bombay Pattern Type Catch Pit of

size 0.60 x 0.60 depth up to 1 mt including

excavation, B.B.C.C. (1:5:10), 23 cms thick brick

maso. wall in the prop. of CM (1:6) with 40 mm

thick IPS flooring in the prop M15 at bottom and

15 mm thick cement plaster inside the catch pit in

the proportion of CM (1:3) with out jali etc. comp.

CatchPit Jali (Heavy duty) Fixing P/F FRC catch pit

184 5.00 jali with frame 600mm x 600mm clear opening No. 1377.64

etc. comp.. As directed by engineer in charge.

R. C. C. PIPE (Vertical Cast) Providing and supplying

ISI Standard R.C.C. pipes in standard lengths of

following class and diameter suitable for either

collar joints or rubber ring joints including all

taxes, insurance, transportation, freight charges,

octroi, inspection charges, loading, unloading,

conveyance to departmental stores, stacking etc

Note : One collar should be supplied with each full

length plain ended RCC pipe, cost included in rates

below. One rubber ring should be supplied with

each full length socketed pipe, cost included in

Lowering, laying and jointing R. C. C. pipes of

following diameters in proper position, grade and

alignment at all level as directed by Engineer-in-

charge including conveyance from stores to site

of work, labour, giving hydraulic testing as per ISI

Providing and supplying,and jointing ISI mark only

standard length stoneware pipes of following class

and diameter including excavation for laying of

pipes, insurance, transportation, freight charges,

octroi, inspection charges, loading, unloading,

conveyance to departmental stores, stacking etc.

186 compl. (IS651/1989 or its latest revision) including

labour work for lowering, laying, joiting with

cement mortar (1:1) proportion, proper postion,

grade and alignment and all level as directed by

engineer in charge including store to site of work

jointing material etc complete.

Hiring Charges For J.C.B.Machine Inclduing Cost Of

187 5.00 Fuel, Operator, Dirver Etc.. Hr 600

Supplying Pneumatic Breaker Machine for RCC

Slab or Asphalt Demolishing Work on site by using

Operator, fuel, power Supply etc. Complete as

Directed. (No payment should be allowed for non

working condition of machinery and for pipe line

excavation and M.H. work. Allowed only for break

down work) (Based on Previously approved rate

Constructing Slab type M.H. Chamber of the

following size including excavation, refilling, brick

bats cement concrete (1:5:10) of thickness

C.M., CC Channel (1:2:4) of thickness 10 C.M.,

finished 15 mm thick cement plaster inside &

outside (Only for shaft) in CM 1:3, finishing with

cement slurry, P/F 4 mm dia M.S.Steel HDPE

189 coated steps 35 cm c/c at 35 cm staggered in

masonary CM 1:5, RCC Slab in CC 1:1.5:3 of

thickness 23 C.M., including Cantering &

reinforcement (double jalli at 15 C.M. c/c bothway

12 mm dia.) but excluding the cost of Manhole

seat cover etc..completed. of Size 1.00 X

meter (Inside Clear, M.H. length should be

parallel to the flow.

a 1.00 1.00 to 2.00 meter depth, (Slab at Ground level) No. 10177.68

2.00 to 3.00 meter depth, (Slab at below 0.6 mt.

3.00 to 4.00 meter depth, (Slab at below 1.00 mt.

Making connection to the ex.M.H.in running sewer

incl. Dewatering and other required machinery

190 etc. of following dia pipes at any convenient time.

All damaged work shall be well repaired as per

instructions. etc..complete.

a 1.00 a. 150 mm to 300 mm dia. No. 1339.29

Cutting the pipes of following dia coming in the

new M.H.in running sewer including cutting bars,

including removing debris /silt from the M.H. and

carting at a suitable distance etc..complete as

directed. No payment for M.H. work will be made

until pipe is not cut completely in all respect.

a 5.00 150 mm to 300 mm dia. No. 1133.93

Providing Kachha of Pakka Dummy in the

192 following dia pipes and removing the same after

completion of the connection work as directed.

b 5.00 (B) 350 mm to 600 mm dia No. 302.68

Providing Dead Cantering using good quality

Country Wood Planks, wall Plate of required

thickness and size including placing the nece.

supports of reqd. size, nailing, fixing with mortar,

levelling. All specification for dead centring as per

standard engg. practice etc. comp. as directed.

Providing and operation dewatering Pump

including fuel charges & operator Charges etc. as

194 5.00 directed etc. comp. (Shift for Eight Hour) (For Each Shift 600

Pump Set, No payment should be allowed for non

working condition of machinery)

Providing & Fixing the double layer safety net

195 10.00 along the scafolding to avoid any free fall of debris Smt 194

Providing & Fixing the green/black colour hessaian

196 10.00 cloth to cover the scafolding etc. complete. Smt 51

Structural steel work ( Confirming to IS 4923-

1997) riveted, bolted or welded in builtup for all

type sections, in framed work, including cutting,

hoisting, fixing in position and applying a priming

coat of approved steel primer all complete as per

the structural designs and

directions of Engineer in charge. Safety

grills/doors of required pattern for windows /

Door/ ventilators using M.S. flats/bar/box

sections as per design and drawing including one

coat of primer.(iteam code20054,S.O.R

Ahemdabad City 2023-24)

F.R.C. Extra Heavy Duty (EHD-35) Manhole

Covers & Frames Cover : 728mm ø & 100 mm

thick circular cover, 35.00 MT load design,

100x2mm MS flat allround, 16mm ø plain round

bar for lifting the cover & should be fitted with

198 5.00 plastic cups. Frame : 560 mm ø clear opening, Set 3354.74

outer size- 888x888x175 mm. On the upper

periphery of frame 25 x 3 mm wide MS flat should

be well embed in concrete to protect the edges of

frame. FRC E.H.D.-35 manhole cover & frame

described as above

F.R.C. Heavy Duty [HD-20] Machinehole Covers -

560 mm ø clear opening, The dimension of frame

and cover as per mentioned in Amend No.1 to IS

F.R.C. Medium Duty [MD-10] Machinehole Covers

- 560mm ø clear opening, The dimension of frame

and cover as per mentioned in Amend No.1 to IS

Carting and Fixing M.H., Chamber or Catchpite

Seat and Cover in line and level to match exisisting

road level in C.C. 1:2:4 and finishing smooth,

watering and protecting for 7 days etc. complete

as directed. M.H. seat cover will be supplied

byA.M.C.(from any store)

Supplying, labour for break down repairing work

for activities like excavation, disliting, removing

debris from trench back filling etc. comp. as

directed by Eng.in charge.

20.00 Mazdoor at day /Night No 363.3

20.00 Fitter at day / Night No 380.3

20.00 Makadam/ supervision at day / Night No 379.46

P/F. to wall ceiling and floor galvanized mild steel

tubes (Medium grade) of the following nominal

203 dia. with all tube fittings and clamps incl. making

good the wall, ceiling and floor. (At any floor level)

Providing & Applying Cement Popada Plaster

In Cement Mortar In 1 : 3 Incl. Cleaning Surface

204 50.00 Before Plastering Rate Also Incl. Scafloding, Smt. 120

Watering , And Neat Finishing Etc. Comp. As

Dire.(N.S./ARC)

Providing and applying fibere reinforced

cementitious micro concrete work in cellings and

beams incl.mixture of CEMSCREED HM (F) fair

mate company material, FBR bonding agent

205 10.00 material with water in suItable proportion anti Smt. 530

corrosive treatment on exposed beam,celling steel

bars with safeCore R incl.all kind of labour

etc.comp.including three coat of white

wash.(Approved Rate in ARC)

Labour Work for moulding the polish kota stone

surface rate also including provding cutting and

grinder machine for molding work etc.complete as

directed.(app.rate)

Labour work for Polish kota stone surface rate also

including providing cutting and grinder machine

for molding work etc comlete as directed.(app.

Providing And Laying Cement Concrete Flooring

For I.P.S.1:2:4 (For Indian Patent Stones) (1

Cement: 2 Coarse Sand:4 Graded Stone

208 100.00 Aggregate 20 Mm. Nominal Size) Lain In Layer Smt. 198.45

Finished With A Floating Coat Of Net

Cement.(40 Mm Th.)(SOR 2021-22 P.160,Item

Additional Rate For Providing Water Proofing

209 100.00 Solution in I.P.S Smt. 25

Providing and Fixing pvc.Door (sintex door-

210 10.00 equivalent) with necessary alluminium fitting with Smt. 1617

EL-7 section frame (Approved Rate as per ARC)

P/F glass of 4 mm thik for vent lowers and window

211 20.00 with wooden border patti as per instruction of No. 150

eng. In chage.(app.rate)

Providing and fixing rough cast wired glass 6 mm

thick bedded in putty and thick with wooden

212 beading including the cost of wooden beadings of

Indian teak wood and necessary cutting of glass.

5.00 (C) wired figured glass. Smt. 659.58

Labour work for fixing above or any interlocking

blocks/nimbhada on up to 50mm th sand

bedding,levelling,watering anf fixing. Rate incl.

213 5.00 average 30cm depth for excavation and or Smt. 69.64

filling,carting away debries/excavated material up

to 5 km and cleaning the site etc.comp. as

directed.I00194

Providing & Laying China Mosaic Flooring On

Terrace With 6Mm Th.White Or Coloured Glazed

Tiles Chips Of Mini.25 To 35Mm Approved.Square

Or Rectangular Shape & Fixing It.Before Start The

Work Remove All Existing Flooring & Open Old

Slab Surface With Wire Brush & Fill Crack If Shown

With Water Proof Material.Than For Making Level

Gps.Work Done In Mini.45 To 50 Mm Th.&

Fixing.China Mosaic In Cm 1:3 With Neat

Cement Slurry At Top & Filling The Gap With

White Or Colour Cement With Finishing Smooth

Surface & Even Shade Incl.Cleaning Of All

Dirt,Dust & Other Foreign Matter.Rate

Including For Making Colour Patta,Round Vata

With Fixing Neccessary Water Spout Opening Gap

Etc.Comp.As Directed.(As per A.R.C)

Providing and laying polished granite stone slab

mm thick in risers of steps, dedo and pllars laid on

10 mm thick cement mortar 1:3 (1 cement :

coarse sand) and jointed with gray cement slurry

including rubbing & polishing etc. complete. (SOR

Providing & fixing 2.00 mm thick F.R.P. sheet of

good quality and standard make rate also includes

necessary fabrication structure in the grid of 1'-6"

x 1'-6" size usiung hollow pipe of size 3/4" x 3/4"

2" x 1" & 1" x 1" rate also inclusive necessary

bending ,cutting and fabrication charges and

priming coat and 2 coats of oil paint of shade

approved by engineer in-charge rate also includes

washer and silicon paste required for fixing the

sheet in good quality as diredted.(As per ARC)

Conveyance charges of earth lime, murrum,

building rubbish, manure, garbage, sludge,

217 50.00 excavated rock, fly ash, aggregate of any kind etc. Cmt. 235.51

comp. upto 5 km lead. (Bldg.S.O.R. 2021-2022 , )

Providing & Fixing Chromium Plated Brass

Flush Cock With Lever Of "Ess Ess" - Trend

218 10.00 Series Or Equivalent Make Incl.Fixing In Pipe No. 1800

Etc.Comp.As Dir.Of Engg.In Charge.(N.S.) (1)

Provdg. & fixing 12.5 lit.PVC Flush tank with

219 10.00 nece.fixtures etc.comp as per site condition (R&B No. 1165.2

Sor 21-22 I.C NO .M216+L025)

P/F Jet Spreay at Europeon WC Pan, incl nece. lath

connection, stop cock, and other fixing material

220 50.00 and labour as per inst. of engineer in charge(R&B No. 361

Sor 21-22 I.C NO .M738)

Providing & Fixing Polytheline Over Head Tank

With Necessary Dia.Holes For Outlet,Inlet Over

221 5000.00 Flow And Washout Necessary Washer And lit 7.72

Checkput Etc.Comp.(N.S.) I00105

P & F app.quality for Conseal lock in Alu.door .as

222 10.00 per inst of engg in charge .etc.comp.(app.rate) No. 300

P & f app.quality for brass baby latch (door

223 10.00 stopper) as per inst of engg in charge .etc.comp No. 180

Providing & Fixing In Position Alluminium Doors

With Frame Using Approved Quality Anodised

Extruded Alluminium Section As Approved By

Engg.In Charge(Jindal Alluminium) (A)Frame

Sections 101.6x44.45 Mm(B)Shutter Bottom

Vertical & Top Section 83.5x44.45 (Wt.1.31

Kg/Mt.)(At 1.31Kg/Mt)(C)Shutter Bottom Section

224 10.00 At14.3x44.45 Mm At (1.37 Kg/Mt) Shutter Smt. 2900

Middle Section At 100x44.3 Wt.(1.37Kg/Mt)

Incl.Providing & Installing 5 Mm Thick Approved

Color Acrylic Sheet Of Standard Quality Fixed

With Glazing Chips On Upper Pannel &

Laminated Sheet On Lower Pannel (Wtt.0.13

Kg/Rmt) Etc.Comp.As Direction Of Engg.In Charge.

Providing & Fixing In Position Alluminium Window

Sliding / Fix Type With Frame Using Approved

Anodised Extruded Alluminium Section As

Approved By Engg.In Charge.(Jindal Alluminium)

Units Equivalent (A) Frame Sections 65 X 25 Mm

(At 0.41kg/Mt) (B) Sliding Frame Bottom Section

Of 61.85 X31.75 Mm (At 0.41 Kg/Rmt) (C)

Shutter Top & Bottom Section 40 X 18 Mm

(Wt.0.41 Kg/Rmt) (D) Shutter Interlock Vertical

Section 10 X18 Mm.(0.41 Kg/Rmt) (E) Shutter

Vertical Of 40 X 18 Mm (0.41 Kg/Rmt) Including

P/F Installing 5 Mm Thick Approved Color

Acrylic Sheet Of Standard Quality

Etc.Comp.(N.S.)

Provding & fixing Aluminum section partition with

powder coating using 2.5'' x 1.5'' all section work

incl.p/f 5 mm thick glass in upper portion and

226 10.00 mm th. Novapan panel in lower section Work Smt. 2500

incl.fixing the partition in wall/floor with

nece.screws,rubber gasket & other fittings

etc.comp. as directed by engg.incharges.

Providing & Fixing In Position Alluminium Vents

With Frame Using Approved Anodised Extruded

Alluminium Section As Approved By Engg.In

Charge.(Jindal Alluminium) Units Equivalent

(Approved Rate) Frame Section Of 63.50 X

38.50Mm (Wt.0.68 Kg/Rmt) Incl.Providing &

Installing 5 Mm Thick Approved Color Acrylic

Sheet Of Standard Quality Etc.Comp. I00136

Providing fiiter for D.I./P.V.C./C.I./M./A.C.

Pressure water pipe linmaintenance work with

necessary manpower, tools, plants, and

equipments, and any other works required for

AMC as per instruction of Engineer in charge etc.

complete. I03723 As per Market Rate

Providing and fixing stoper (M.S.) 6 inch with

necessary fiting in wooden door including removel

of old fiting if any etc completed as directed.

Providing and fixing Aldrop 10 mm size (M.S.) with

necessary fiting in wooden door including removel

of old fiting if any etc completed as directed.

I00872 Aldrop 10mm

Providing and fixing handle (M.S.) 4 inch size in

with necessary fitting in wooden windows

including removal of old fitting if any etc

completed as directed.I00873

Providing and fixing stopper (aluminium) 6 inch

with necessary fiting in wooden door including

removel of old fitting if any etc completed as

directed. I00890 6 inch

Providing and fixing Aldrop 10 mm size

(aluminium) with necessary fiting in wooden door

including removel of old fiting if any etc

completed as directed I00891

Providing and fixing handle (aluminium) 6 inch size

in with necessary fitting in wooden door including

removal of old fitting if any etc completed as

directed.I00889

Reparing of existing Aluminium

window/door/partition by making necessary

addition/alteration in same sides. Rate incl of

necessary fittings required and all labour included.

If necessary rate also incl. of removing from

position and refixing it at same place after

repairing it, etc comp. as directed. Sub Desc : As

per approved rate of AMC MET work I01334

Repairing of Doors/Windows shutters and Frames

including refixing-aligning shutter, providing,

236 50.00 replacing, fixing MS hinges, Aluminium aldrops, No. 250

stoppers, tadi etc. complete excluding painting as

per specifications.(app.rate)

Providing & Fixing wall,ceiling and floor

Kg.F/Sq.Cm 160 mm working pressure polythelene

pipes of low density, complete with special flange

compression type fittings,wall clips etc.making

good wall ceiling and floor as directed by engg.in

charge etc.comp.

P/F. 10 mm thick Novapan sheet of approved

238 10.00 quality including fixing on partition with necessary Smt. 1400

all fixtures as directed by engg.in charge etc.comp

P/F. new 12.5mm th. Gypsum board ceiling with

necessary heavy weight GI framing members as

per site requirement.Work incl. Supplying of

239 20.00 app.brand gypsum boards and fixing it as false Smt. 650

ceiling in line and level with all necessary

hardware and labour etc. comp.as dire. (At any

GLASS FILMS (sun control, Safety film, decorative,

reflective, frosted, opaque film etc) Imported

Lumaar make as approved by engg.in charge

Providing and fixing 4 mm th. Acrylic sheet of

approved quality including fixing with

241 15.00 door/window shutter & frames with necessary all Smt. 3140

fixtures as dircted by engg.in charge etc.comp.

Providing & Fixing Floor Spring including fixing

242 5.00 shutter etc. complete as per inst. of engineer in No. 3300

P/F. thermocol ceiling with necessary aluminium T

section 25 x 25 x 1.2 mm inclusive fixing it to all

wall to ceiling junction and at junction position of

243 10.00 two sheets ,item also includes p/f 20 mm thick Smt. 375

plain thermocol sheets size (1 x 0.5 mt) with all

necessary fastening and hardware etc. comp.as

dire. (At any floor level)

labour charge for cleaning U.G. and O.H. tank by

modern science technology with six stage process

as below: (1)Dewatering existing water by

submersible pump. (2)Hydro jetting by

150kg/sqcm pressure.(3)Vaccum cleaning to suck

the sludge and turbidity on bottom

surface.(4)Heat air system by 80C temp for drying

corners and all side of tank.(5)Antibacterial

chemical spraying to all surface of tank and

then(6)Ultra-violet radiation pan treatment to

tank in this six stages on site classic supply

etc.Electric connection shall be provided by AMC

MET without charging any extra cost.the complete

tankcleaning by micro cleaning system comp. as

ditected.rate of above process are as below

capacity of tank.

A 2.00 up to 5000 litre NOS 1200

B 2.00 5000 litre to 10000 litre NOS 1500

C 15000.00 Under Ground water tank LITER 0.05

Providing and applying texture paint at approved

quality, colour scheme, including preparation of

surface, primer 2 coats+2 coats of putty and

texture paint, as per manufacture's specification,

scaffolding, roller finish etc complete as per

instruction of engineer in charge

Supplying and installation of 10mm thick recycled

rubber flooring having anti-skid and sound

absorbing properties, square shaped, with

different color optns for create flooring pattern,

246 1.00 should be installed with proper adhesive as per Smt. 1234

manufactures's guidelines, joints of surface to be

done properly to prevent dirt & watepenetration

inside the surface. etc complete as per instruction

of engineer in charge

Arrangement of zula with two or nece. skilled

labour for repairing & maintenance work out side

building work etc.complete as per insructer

incharge(At any floor level)

Providing Scaffolding for Demolition Plaster Work

& painting workby 'H' Frame Stand of by any

means like bamboo, balli etc. including carting

material work site and removing after completion

of work. Rate include any type rent etc. complete

for any height as directed by engg. in charge.

Providing, Manufacturing, Fixing Chain Link Jali

8".0" X 4".0" as per detailed Sketch & instruction

of Engineer in Charge same as Lal Darwaja Garden

Pattern Consisting of 3" dia MS pipe A class 5".4"

height fixed at 8".9" in C.C. (1:2:4) block of 9" X 9"

X 9" size chain link jali 2" X 2" X 10 gauge fixed in

35 X 35 X 5 mm MS angle frame of 8".0" X 4".0"

249 5.00 size with MS flat of size 25X3 mm welded with jali Rmt. 1940

etc. Comp. The Jali is to be Welded to MS angle

with MS Flat as per instruction given. The MS Pipe

Jali, MS angle frame are to be painted one coat of

primer & two coats of paint as directed, in line and

level.The two hold fast has been welded at equal

distance at the bottom angle of jali for support

fixed in C.C. as directed by Engg. in Charge.

Providing and fixing Aluminum Composite Panel

signages of various size and in any language. The

250 500.00 mm thick Aluminum composite panel shall be 6

cladded with retro reflective high intensity grade

radium sheets. The signages shall be of any

251 10.00 G.I. Coupling 50 mm dia A-Class RMT 80.51

252 10.00 G.I. Coupling 40 mm dia A-Class RMT 40.68

Providing & Fixing Door closer-complete of

253 20.00 Approved make to wooden / Alluminium Doors as No. 480

per direction of engg.in charge.(N.S.)

Providing and applying pressure grouting with

Water proofing materials silicon baseWater

254 10.00 repellent compund including matrial, labour with Smt. 2345

required all machinery and etc complete. (R.A.)

Providing and fixing Polycarbonate roof Lexan

sabic 10 mm th.sheets of approved make, on

structural roofing / sky ligh structures in shapes as

255 2.00 per Architect’s drawing. The rate shall include cost Smt. 2094.29

of scaffolding, screws, nuts, bolts and all necessary

fixtures and fastening etc complete (Rate excluded

structural steel work)ARC

Providing and laying brick bat coba water proofing

of average 100 mm. thick for sunk, balcony,

terrace, rain water gutter at all heights/ floors

using cement mortar 1:3, arranging brick bats

according to the slope, adding suitable water

proofing compound for water-tightness and again

providing on top cement mortar 1:3 including

addition of waterproofing compound and finishing

the top with neat cement @ 2.75 kg/m² and

preparing the rough surface if required as per

direction and instructions, complete. The work

should be carried out through an approved

specialized agency. The contractor to give testing

for water tightness and provide guarantee for

years on Rs. 300/- stamp paper in approved

Performa. as directed by EIC. (R.A)

Providing and injecting approved grout in

proportion recommended by the manufacturer

into cracks/honey-comb area of masonry by

suitable gun/ pump at required pressure including

cutting of nipples after curing etc. complete as per

257 50.00 directions of Engineer-in-Charge. Stirrer mixed SBR kg 101.55

Polymer(of approved make) modified Cement

slurry made with Shrinkage Compensating Cement

in masonry work. (The payment shall be made on

the basis of actual weight of approved grout

Providing & Placing dual shrinkage-

compensated,high flow cementitious

microconcrete added with aggregates in 1:0.5 (1

Powder:0.5 aggregate)proportion & suitable water

microconcrete ratio so as to acheive compressive

258 1.00 strength not less than 40MPa at 28 days for Cmt 28647

column jacketting inclusive of Labour, material,

curing and equipment for all heights, location,

shape & size as directed by the architect/engineer

incharge. (The mode of measurement shall be as

that of RCC as per IS code)(APPROVE-ARC)

Providing & Applying One componant dual

shrinkage-compensated structural Grade ready to

use repair mortar in two or three layer for repairs

of beams etc. including all materials, labour etc.

for all heights, location, shape & size.The finish

surface to be level matched with the existing

adjoining surface etc. complete as directed by

Architect/Engineer Incharge. [Quantity consumed

shall be accounted for payment

purpose].(APPROVE-ARC)

Providing & applying one or more coats of

Nondegredation(which dont reqire removal),

acrylic resin based membrane forming single

260 15.00 componant liquid curing compound for sealing of Smt 57

moisture & curing including all materials labour

etc. for all heights,locations, shape & size as

directed by the engineer incharge.(APPROVE-ARC)

Providing & applying of 6-9 mm thick 1:3 CM (1

Cement : 3 fine sand ) mortar over one coat of

epoxy bond coat on all type of surface for all

shape,size & height including all labour,

material,scaffolding, curing etc.complete as

directed by the Engineer incharge.(APPROVE-ARC)

Providing & applying polymer modified cement

mortar in the proportion cement : sand in 1:3 (by

weight) fortified with SBR in 2 or 3 or 4 layers upto

50mm overall thickness,wherever total thickness

of repair is exceeding 50mm, use of 10/ 6 mm

262 10.00 down size aggregate may be required. The finish Ltr 937

surface to match with the existing adjoining

surface etc. complete as directed by Architect/

Engineer Incharge. [Quantity of SBR actually

consumed shall be measured for payment

purpose].(APPROVE-ARC)

Providing & applying polymer modified cement

mortar in the proportion cement : sand in 1:3 (by

weight) fortified with SBR in 2 or 3 or 4 layers upto

50mm overall thickness. The finish surface to

263 5.00 match with the existing adjoining surface Smt 1187.34

etc.complete as directed by Architect/ Engineer

Incharge. [Quantity of SBR actually consumed shall

be measured for payment purpose].(APPROVE-

Galvanic Sacrificial Protection of steel:-Providing

and fixing sacrificial zinc anode to prevent

initialization of corrosion of reinforcement due to

chloride ingress from VECTOR Galvashield XPI or

equivalent at Min. 2 to 3 anode/sqm area of

concrete (spacing of 300 to 600mm), covered with

mortar with of resistivity less than of parent

concrete on the cleaned reinforcement steel as

per manufacturers specification before applying

passivation coating. Item rate is inclusive of the

meterials all labour, supervision , tools and tackles

and transportation etc. complete as per

specification and as directed(APPROVE-ARC)

Providing and fixing PVC plain colour false ceiing

with grid type with a luframe consisting of

600mmx 600mm 3mm thick plain PVC sheet used

as panel insert in a frame work made using an

odized alluminium T section of size 1”x1” (25 x

25mm,19 gauge or 1mm thick) in square pattern

of grid sizes of 2x2 (600 x 600mm).The alluminium

265 5.00 frame work is supported from the ceiling with the Smt 300.12

help of G.I.hook and G.I.wire/6mm M.S.rods of

required sizes to maintain proper level etc.The

aluminium frame work is supported on side wall

with the use of alluminium Lsection of size1x1

(25x25mm)angle set.Complete as per direction of

Engineer incharge. Manufactures, specification

Providing and fixing 30 mm thick FACTORY MADE

SOLID PANEL PVC DOOR SHUTTER consisting of

frame made out of M.S. tubes of 19 gauge

thickness and size of 19mm x 19mm for stiles and

15mm x 15 mm for top and bottom rails. M.S.

frame shall have a coat of steel primers of

approved make and manufacture, M.S. frame shall

be covered with 5 mm thick heat moulded PVC ‘C’

channel of size 30 x 50 mm forming stiles, and

5mm thick 75mm wide PVC sheets for top rail,lock

266 10.00 rail and bottom rail on either side, and 10mm Smt 1960

(5mm x 2) thick, 20mm wide cross PVC sheet as

gap insert for top rail and bottom rail, Panelling of

5 stiles and rails with 30mm wide x 5mm thick PVC

sheet beading on eighter side, and joined together

with solvent cement adhesive,. An additional 5mm

thick PVC strip of 20mm width is to be stculk on

the interior side of the ‘c’ channel using PVC

solvent cement adhesive etc. complete as per

direction of Engineer in charge,manufacture’s

specification and drawing.(APPROVE-ARC)

Supplying Potable Water Tanker attached with

motorpump to be filled from nearby water

distribution station of AMC. with 30 meter

Delivery Pipe. The tanker should be supplied as &

where reuired & when order placed by Engineer

In- Charge The rate includes the fuel charge,

driver's charge etc.complete. (APPROVE RATE At

2mm Aluminium/ 4mm ACP sheeting fixed with

Type-Class-B High Intensity Grade Sheeting as per

IRC67:201 reflective sheeting of size including

268 90.00 lettering and signs as applicable,pageNo38,Item Smt 3955.08

code-M1048 Ahmedabad City Building SOR 2023-

24- With out GST(APPROVE ARC)

Providing and fixing of Roller blind

curtain/blackout.The fabric shall be woven from

formulated platisol extruded over a polyaster

yarn.The fabric should be weaved to provide

subtle view of the side of the blind and should

offere limination of glare and sunlight radiance up

to a minimum of 80%.The fabric shall be flame

retardant.(Approved rate)

Wall panelling with 12mm MDF fixed to existing

alluminium framing and making grove as per

270 10.00 design and finished with royal plastic paint as per Smt 1,688.00

instruction of engineer incharge. (N.S.)

Providing&Connecting 75mm/100 mm dia PVC

joints like Coupler,Tee,Y-joints,Connecting Pipe to

wall,ceiling&floor open/concealed PVC pipe line

10Kg. F/Sq.Cm working pressure of"

Prince/Finolex" or equivalent Brand of following

nominal bore with all required fitting with brass

insert wherever required,clamps&solution

incl.making good the wall, ceiling and floor.

Providing and laying ACP sheet for Elevation to be

fixed on availabel alluminum section structure,all

272 10.00 fixing materials,finishing,all lead and Smt 2200

lift,etc.complete as per engineer in charge

Providing and laying ACP sheet for Elevation

including fixing on alluminum section structure,all

fixing materials,finishing,all lead and lift, etc.

complete as per engineer incharge.

Providing&Fixing Stair/Balcony Railing as per

Consultant's Design from M.S.square

Rectangular,Round pipe of required

Dia,M.S.Flat,Angle,channel&other sections of

274 6.00 required size as per detail work include Rmt 965

sutting,bending,welding,grinding,Fixing with

necessary supports-hold fasts,Application of one

coat of Zinc Primer,Two coats of Oil Painting

etc.complete.(N.S.)

Fabricating,supplying and fixing in position SS

railing for staircase and balcony with brush finish

and 304 grade as perIndian Standrd and detailed

drawing including grinding,cleaning and filling the

welded spots with SSfinish (Only Length will be

paid for payment heigth max.1.2mt.).The Work to

be executed as per consultant drawing.Top

Rail:S.S.Railing pipe 50mmx16GAS IS 304 Grade

Vertical Support: S.S.Rialing Sq pipe 32x32mmx16

GAS IS 304 Grade (at every 1.0mt to 1.20mt

c/c)Horizontal Safety members :S.S. Railing pipe

16 mm x 16G ASIS 304 Grade (4 Nos. min.)

Providing and fixing 23cms wide chicken mesh

jaali with nails&then application of 15mm plaster

on R.C.C.&Masonary joints as per directed of

Engineer in Charge

Providing&Mixing of Waterproof Chemical in

Cement mortar for Inside/outside Plaster work

277 2.00 of"Roof","Fosroc"or equivalent make in Liter 260

proportion as per company's user

manuals&Direction of engg. In charge.

Providing and fixing brush finish stainless

steel(304)stair case railing which includes

cutting/bending/welding/buffing to give brush

finish and grouting in cement concrete with

anchor fasteners without disturbing the flooring or

278 1.00 as approved by the consultants.THREE Horizontal Rmt 3,935.00

pipes of 38mm diameter each and top pipe of

50mm diameter.Vertical Post of size 50mm

diameter at every 1200 mm.At the end and start

of the flight,baluster of75mm diameter pipe shall

Providing and fixing Kitchen sink with C.I. or M.S.

brackets,painted white including cutting holes in

279 1.00 walls and making good the same but excluding Nos 2,257.69

fittings. ©Vitreous China Sink. (i) 600 mm x

Providing & Fixing S.S.304 Grade Sink of Nirali /

280 1.00 Krishna or Equivalent Make for Kitchen Platform Nos 4,650.00

of size :24"x18" as per Direction of engg. In charge

Supplying and fixing Conductive anti static

homogeneous Anti bacterial & Anti fungal Vinyl

flooring rolls of P group of approved make &

shade minimum 2.0 mm thick of standard sizes as

per EN 649/relevant code of manufacturers

specification having 10 years replacable warranty

over the existing floor. The rate shall include all

cuttings and wastages, cutting and providing tile

above electrical trunking, cost of all materials

adhesives of approved make etc, including

welding of joints., Coving and copper strips,

complete all as per detailed drawings and

specifications as directed by EIC Material to be

installed using Conductive Adhesive only. Only laid

area will be measured for payment. Rate Includes

lead and lift at all floors. The item to include all

materiral, fixing, scaffolding, labour, Wastage etc.

complete in all respects. Note: No extra payment

pay for architectural Ornamental Design upto 10%

of flooring area. Rate shall be inclusive of cutting

of tiles in any shape, at any level for service

SIGNAGES HANGING FROM CEILING

Providing,Fabricating&Fixing signage's using

grade Stainless steel1.5mm thick brushed steel

finish plate (2nos) with 8mm thk. Acrylic sheet

282 10.00 covered with vinyl of approved colour,sandwiched Sq.inch 61.60

between two S.S plate and fixed with s.s

struds.Sandwiched plates should be fixed in

12mmX12mm S.S 1.5mm thk .304 grade frame

and punched(lasercut) lettering carried out on

both the s. s plate so frequired size and text as

directed by Engineer and hanged to ceiling with

the help of S.S 8mm thick chain at both ends with

making all the fixing arrangement to the ceiling

and to the plate complete.

providing and Fixing High Quality Vinyl Printing

with Pasting in Lamination in 3 mm foam sheet

283 100.00 with loading, unloading, labour Charges ETC Sq.Feet 62.00

Complete.Approved Rate in Publicty Department

providing and Fixing Recto reflective Vinyl Printing

with ACP sheet Sinages with loading, unloading,

labour Charges ETC Complete.Approved Rate in

Publicty Department I.N.34

FIRE Fighting system

Refilling and servicing of ABC Type (Mono

Ammonium Phosphate 50%) Fire Extinguisher with

a capacity of 6 KG, including complete discharge,

285 15.00 internal cleaning, refilling with fresh MAP 50% Nos 850

powder, cartridge checking, and overall inspection

as per safety standards.(approve rate at amc met-

Refilling and servicing of CO₂ Type Fire

Extinguisher with a capacity of 4.5 KG, including

safe discharge of residual gas, internal inspection,

286 15.00 valve servicing, and refilling with certified CO2 gas Nos 758.93

as per safety norms..(approve rate at amc met-

Complete refilling and servicing of K-Type Wet

Chemical Fire Extinguisher with a capacity of

Litres, specially designed for kitchen and cooking

oil fire hazards. Including safe discharge, internal

cleaning, refilling with approved wet chemical

solution, and valve assembly servicing as per

safety compliance standards..(approve rate at amc

Providing and fixing, testing and commissioning of

Dry Chemical Powder (ABC) Store Pressure type

kg confirm to IS: 15683, with ISI marked / TAC

approved fitted with required accessories

including wall suspension brackets.(approve rate

at amc met-piu ARC Tender)

Providing and fixing, testing and commissioning of

Carbon Dioxide (Co2) type Fire Extinguisher of

kg confirm to IS:15683, with ISI marked/TAC

approved fitted with required accessories

including wall suspension brackets.(approve rate

at amc met-piu ARC Tender)

Supply, installation, testing and commissioning of

290 SS 304 ball valve at 21 bar working pressure for

suction as per direction of Engineer in Charge.

0.00 (a)50 MM Dia. Nos 7928.57

Approved L.G. Hospital Rate Without Tax

Supply, installation, testing and commissioning of

SS 304 schedule 40 piping with fittings, flange, nut

and bolts, clamps, o-rings. Suction, deliveryand By

pass lines. (SVP Approved rate)

0.00 (a)50 MM Dia. Mtrs 3742.86

0.00 (b)40 MM Dia. Mtrs 3429.46

Supply,installation,testing and commissioning of

292 Pressure Guages 200 bar 100mm dia 3/8 BSP

connection with needle valve (SVP Approved rate)

0.00 Basement-2 Nos 3924.11

Supply,installation,testing and commissioning of Y-

293 Type Twin strainers for each pump. (SVP

0.00 (a) 50mm dia in pump room Nos 13500

Approved L.G. Hospital Rate Without Tax

Supply, installation, testing and commissioning of

Manual On/ Off buttons with break glass to start &

stop Fire Hose reel pump in case of emergency

294 with complete elctrical connections and 1.5 sq

mm frls wiring.(The ON/OFF switch is tested at

factory and performance approved by the Local

fire Authority). (SVP Approved rate)

0.00 Up to Terrace Floor Nos 1974.11

Supply, installation, testing and commissioning of

Water Mist Hose Reel drum on each floor. LM

Hose reel drum & water ways complete made of

295 SS & High tensile brass with winding gear

arrangement (The Hosereel is tested at factory

and is approved by the Local fire Authority). (SVP

0.00 Up to Terrace Floor Nos 44014.29

Supply, installation, testing and commissioning of

60 mt length High pressure Hose pipe which has

to be 16mm Dia R2 hose on each floor. It should

have a minimum thickness of lining as 1.5 mm and

297 of cover as 1 mm. Working pressure has to be

bar and testing pressure as 500 bar and is

pulsation resistant (The Hose is tested at factory

and is approved by the Local fire Authority). (SVP

0.00 Up to Terrace Floor Nos 58300.89

Supply, installation, testing and commissioning of

SS 304 Ball valve 19mm dia (3/4'') on each floor

298 150 Kg/cm2 working pressure.(The Valve is tested

at factory and is approved by the Local fire

Authority). (SVP Approved rate)

0.00 Terrace Floor Nos

0.00 Up to Terrace Floor Nos 3650.89

Supply and fixing of S.S 304 Piping (Schedule

seamless) consisting of high pressure

299 fittings,compression fittings and necessary M.S.

brackets etc (For water Mist vertical Riser & other

connections).(SVP Approved rate)

0.00 a) 25 mm dia Rmt 2726.79

Supply and fixing of S.S 304 Piping (Schedule

seamless) consisting of high pressure

300 fittings,compression fittings and necessary M.S.

brackets etc (For water Mist header, loop & other

connections).(SVP Approved rate)

0.00 a) 20 mm dia Rmt 2313.39

Supply, installation, testing and commissioning of

301 SS 304 Ball valve at 150 bar working pressure at

delivery at all floor levels (SVP Approved rate)

0.00 (a)25 MM Dia. Nos 3745.54

Supply,installation,testing and commissioning of

2-WAY Brigade with high pressor cntrols & valves

inletwith NRV and other fixing accessories (SVP

0.00 (a) 25mm dia Nos 10748.21

Supply fabrication and erection of MS angle

supports for Pipe lines (SVP Approved rate)

PIPELINE AND ACCESSORIES FOR ALL FLOORS

Supply,installation,testing and commissioning of

Water mist Sprinkler (Below False ceiling) of

lpm discharge capacity @ minimum 7 bar

breakable at 57 degree Celsius with ½ “ inlet

connection with roset plate and all accessories,

supports and painting etc.

(The sprinkler is tested at factory and is approved

by the Local fire Authority). (SVP Approved rate)

0.00 Up to Terrace Floor Nos 937.5

Supply,installation,testing and commissioning of

Water mist Sprinkler (Above False ceiling) of

lpm discharge capacity @ minimum 7 bar

breakable at 57 degree Celsius with ½ “ inlet

connection with roset plate and all accessories,

supports and painting etc.

(The sprinkler is tested at factory and is approved

by the Local fire Authority). (SVP Approved rate)

0.00 Up to Terrace Floor Nos 937.5

Supply,installation,testing and commissioning of

Water mist Sprinkler (Side wall type) of 15 lpm

discharge capacity @ minimum 7 bar breakable at

307 57 degree Celsius with ½ “ inlet connection with

roset plate and all accessories, supports and

painting etc. (SVP Approved rate)

0.00 Up to Terrace Floor Nos 937.5

Supply and installation, testing and

commissioning of SS Sprinkler flexible Pipe

required length of 1.5M including angles,

supports and all accessories (UL Listed)

Supplying, installation testing and commissioning

of the following (Class 'C') MS pipes and fittings

confirming to IS 1239 P I & II, The pipes complete

with necessary specials such as tees, bends,

flanges, reducers, etc. Rate quoted shall include

for painting of pipe with a coat of primer and two

coats of synthetic enamel paint of approved

colour / make for aboveground piping and coating

& wrapping for under ground piping as per Local

fire service department requirement complete

including supply and installation of pipe supports

from column/wall or suspenders from roof slab to

suit various dia of pipes made out of GI adjustable

rods threaded for a sufficient length to adjust the

height of support along with clamping

arrangement for holding pipes of anchor fastening

arrangement design of hanger ETC., (SVP

Above ground piping with necessary flanges &

fittings such as elbows, tees and Painting,

supports and Orifice plates if any necessary for the

fire protection system complete as per the

requirement of Local fire service department.

(SVP Approved rate)

i 1.00 a) 100 mm dia ( Down comer) Rmt 1444.64

ii Basement Floor

1.00 a) 20 / 25mm mm dia Rmt 245.54

1.00 b) 40 mm dia Rmt 393.75

1.00 c) 50 mm dia Rmt 573.21

1.00 d) 80 mm dia Rmt 918.75

1.00 d) 100 mm dia Rmt 1444.64

1.00 e) 150 mm dia Rmt 1948.21

Supply installation testing and commissioning of

Water CO2 type Fire Extinguisher of 9Kgs.

capacity, fitted with discharge control valve (

squeeze grip type ) , inside co2 gas cartridge of

310 60gms conforming IS:4947 with ISI mark, with

discharge hase and open nozzel overall

conforming to IS: 15683 with ISI mark along with

wall bracket and initial refilling at site . Fire Rating

3A. (SVP Approved rate)

10.00 Upto Terrace Floor Nos 4503.57

Supply installation testing and commissioning of

Dry Chemical Powder 6.0 kg capacity fitted with

discharge control valve ( squeeze grip type ),

inside co2 gas cartridge of 120gms conforming to

IS: 4947 with ISI mark and DCP powder as per IS:

14609 ( for ABC class ) with ISI mark packed in

5kgs HDPE bags, with discharge hose and open

nozzel and supplied complete with initial charge

overall conforming to ISI: 15683 ISI mark and wall

bracket . Fire Rating 34B. (SVP Approved rate)

10.00 Upto Terrace Floor Nos 3195.54

Supply installation and fixing of flow switches in

the following Pipe line with 1NO+1NC Contacts

at all hight and all level as per instructions of EIC.

(SVP Approved rate)

0.00 From Basement to Terrace Floor Nos 2995.54

Fire buckets round bottom type enamel painted,

white inside & Red out side and Letter "FIRE" in

black out side and handle with mounting bracket.

(SVP Approved rate)

Fire bucket stand fabricated by MS angles to

install 2 Nos. of buckets. (SVP Approved rate)

FURNITURE ITEAM

Meeting Room Conference Table.(approve rate at

L.G &SCL HOSPITAL )

Executive Hydraulic Revolving Chair with foam

316 1.00 rubber Handel,directed by Engg. in Nos 15010

Charge.(approve rate at L.G &SCL HOSPITAL )

Medium Back Revolving Chairs with foam rubber

317 1.00 Handel,directed by Engg. in Charge..(approve rate Nos 10580

at L.G &SCL HOSPITAL )

Medium Back Revolving Chairs with foam rubber

318 1.00 Handel,directed by Engg. in Charge..(approve rate Nos 15050

at L.G &SCL HOSPITAL )

Box Type Sofa Two Seater Foam Rexin/Tepestri

319 1.00 Cusion,directed by Engg. in Charge..(approve rate Nos 27920

at L.G &SCL HOSPITAL )

Box Type Sofa Three Seater Foam Rexin/Tepestri

320 1.00 Cusion,directed by Engg. in Charge..(approve rate Nos 38850

at L.G &SCL HOSPITAL )

Round Tripod,directed by Engg. in

Charge..(approve rate at L.G &SCL HOSPITAL )

Side Tripod (Size: 18" x 12" x 15")

322 1.00 Laminated,directed by Engg. in Charge.(approve Nos 1450

rate at L.G &SCL HOSPITAL )

Office Chair with foam on seat-back side,directed

323 1.00 by Engg. in Charge.(approve rate at L.G &SCL Nos 5800

Students Chair with writing pad,directed by Engg.

in Charge.(approve rate at L.G &SCL HOSPITAL )

Stool for Peon with laminated Top (Size: 13" x 13"

325 1.00 x 21"),directed by Engg. in Charge..(approve rate Nos 2160

at L.G &SCL HOSPITAL )

Waiting Area's Chairs in Set of 3 Nos,directed by

326 4.00 Engg. in Charge.(approve rate at L.G &SCL Nos 7200

Executive Table Laminated Top Drawer Cabinate

with Side Cabinet(Special Shapes as per

Requirement),directed by Engg. in

Charge.(approve rate at L.G &SCL HOSPITAL )

B-Table with top laminate and with Top two

cabinate and apron,directed by Engg. in Charge.

(Size:4'X2'X2.5')

Computer Table with Key Board Drawer & Cabinet

329 1.00 (Size: 4' x 2' x 2.5"),directed by Engg. in Charge Nos 12045

.(approve rate at L.G &SCL HOSPITAL )

E-Table Laminated Top with one Cabinet (Size: 3' x

330 1.00 2' x 2.5),directed by Engg. in Charge.(approve rate Nos 7000

at L.G &SCL HOSPITAL )

Podium For Teacher's In Teaching Room,directed

331 1.00 by Engg. in Charge.(approve rate at L.G &SCL Nos 7140

Steel Trainee Locker with 12 Nos. (Approx. Size

332 1.00 78" x 36" x 18"),directed by Engg. in Nos 20500

Charge.(approve rate at L.G &SCL HOSPITAL )

Big Steel Reck with 6 Partition (Size: 6.25' x 3' x

333 1.00 1.25),directed by Engg. in Charge.(approve rate at Nos 6800

L.G &SCL HOSPITAL )

20 Gauge Steel Store Cupboard with Two

334 1.00 Partition,directed by Engg. in Charge. (Approx. Size Nos 10050

20 Gauge Steel Store Cupboard with Glass door

and Four Partition (Approx. Size 78"

x36"X18"),directed by Engg. in Charge..(approve

rate at L.G &SCL HOSPITAL )

Notice Board with Glass Shutter (Size: 3.5' x 2" x

336 1.00 3"),directed by Engg. in Charge.(approve rate at Nos 4450

L.G &SCL HOSPITAL )

Simple Soft Board with Cloth,directed by Engg. in

Charge.(approve rate at L.G &SCL HOSPITAL )

The Rates are Exclusive of GST. Prevailing GST will be paid separately.

Contractor’s Quoted Rate

IN FIGURE IN WORDS

Net Quoted Tender Amount Rs.

Seal and Signature of the Bidder Additional City Engineer

mobile no. (Amc met/ Hospital)