Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹46.1 LAccepted-AOC NIL | THE NILGIRIS | TAMIL NADU | 638451 | L1 | Accepted-AOC LOWEST BIDDER | |
| 2 | L2₹47.6 L+₹1.1 L (2.33%)Rejected-Finance KHUDIRAMPALLY P O BANARHAT DISTT JALPAIGURI W B PIN 735202 | JALPAIGURI | WEST BENGAL | 735202 | L2 | Rejected-Finance OTHER THEN LOWEST BIDDER | |
| 3 | L3₹47.9 L+₹1.4 L (3.09%)Rejected-Finance | L3 | Rejected-Finance OTHER THEN LOWEST BIDDER | |
| 4 | L4₹49.1 L+₹2.6 L (5.66%)Rejected-Finance NEAR KRIPAN GATE PO BINNAGURI DIST JALPAIGURI W B PIN 735203 | JALPAIGURI | WEST BENGAL | 735203 | L4 | Rejected-Finance OTHER THEN LOWEST BIDDER | |
| 5 | L5₹51.1 L+₹4.6 L (9.95%)Rejected-Finance DEPOTPARA PO BINNAGURI 735203 DISTT JALPAIGURI W B | JALPAIGURI | WEST BENGAL | 735203 | L5 | Rejected-Finance OTHER THEN LOWEST BIDDER |
Tender Value
₹46.5 L
EMD Value
₹93,000
Closing Date
28 Oct 2022, 9:00 amClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (SOUTH) BINNAGURI
GE (SOUTH) BINNAGURI, PO - BINNAGURI, DISTT - JALPAIGURI, PIN - 735232
SPECIAL REPAIR TO BLDG NO NO-8 AND NP- 15 (STORE SHED) OF 440 COY ASC (SUP) TYPE B AND CERTAIN PROVISION WORKS AS PROVN OF HARDSTANDING MAIN GATE STOCKING WING OF 20 MTN DOU ,PROVN OF 01 X VEH RAMP WITH WASHING POINT OF 1821 MED REGT AT TELIPAR
2022_MES_555627_1
8525/E8
Open Tender
Civil Works
Item Rate
180 days
GE (SOUTH) BINNAGURI
AS PER TENDER DOCUMENTS
7 documents required · 7 mandatory
₹500
GE (SOUTH) BINNAGURI
₹93,000
Yes
9 Nov 2022
1 Oct 2022
29 Oct 2022
1 Oct 2022
28 Oct 2022
14 Oct 2022
Amount
Schedule 'A'
Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings sheets
S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified
S & F pre painted galvalume aluminium zinc coating GI Based plain steel sheet 0.50 mm thick of any colour having tensile strength 550 Mpa as in eaves board fixed with selp tapping screw as specified
Dismantling structural steel work including doors, gates but excluding framed truss etc complete all as specified and as directed.
S&F Roof trusses (framed), trussed,purlins, crane gantries, rails and fastenings and heavy racket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc.
S&F 40x6 MM wind ties for roof including securing bolts,cutting tops to shape as drilling holes, notching for wire etc, and similar work conforming to Fe-290 Gde E-165 complete all as specified and as directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), remov-ing serviceable tiles to store and rubbish off the premises
M&L coloured Glazed ceramic joint free tiles in vertical surface 300x200x 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including 10 mm thick cement plaster (1:4) complete all as specified and directed
M&L for coloured joint free non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors, skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with tile including 15mm thick screed bed in cement mortor 1:6 complete all as specified
M&L for 80mm thick M40 grade factory made vibratory compected cement concrete rubber moulded, interlocking paver block any shape and size conforming to IS 15658-2006 with grey cement and pigment as approved laid over and including 25mm thick consolidated sand cushion and joints filled with sand complete all as specified and directed.
M&L for cement concrete type B1( 1:2:4) 20 mm graded aggregate) in floor (25 mm thick), finished rough to receive floor finishes
M&L for two coat of synthetic enamel paint over a coat of red oxide including preparation of newly steel surfaces all as directed.
Taking down cement plaster on brick or concrete surfaces including raking out joints,hacking for key scrubbing down with water etc.
M&L for plastering in cement mortar (1:6), 15 mm thick on brick /surfaces of other than fair face even and smooth without using extra cement.
M&L for 15 mm thick plastering in CM (1:4) on fair faces of brick/concrete surface top layer finished even and fair without using extra cement with water proofing compound (WPC will be measured and paid separately)
M&L for preparation of newly plastered surfaces and applying three coats of white wash on wall.
Supply only Integral water proofing compound
Demolition of brick work or stone boulder masonary built in cement mortar including all quoins arches pillars etc. but excluding ashlar facing dressed stone work and precast concrete articles
M&L brick work with sub class 'B' brick straight or curved on plan exc 6 m mean radius built in CM 1:6
M&L preparation of new plaster surface and applying two coats of cement base paint,including necessary putting at new wall surface complete all as specified and directed .
Complete removal of existing treatment and applying two coats of cement base paint, white or tinted on old wall surface including preparation of surface.
M&L for applying two coat of weather coat exterior paints as per manufacturers instruction on the surfaces of wall including cornices, pillasters and other wall Feathers etc
Demolition of cement concrete in ground floor and pavings n.exc 15cm thickness (below or above ground level)
M&L for 75mm thick PCC type C-2 , 1:3:6 (40mm graded stone aggregate) al in plinth protection/ foot path finished even and fair without using extra cement all as directed
Demolition of cement concrete of any description and in any position not other wise specially provided for as in surface channel.
M&L for PCC type C-2 , 1:3:6 (40mm graded stone aggregate) al in surface channel.
Extra forming fair finished drain as in channel 30 cm inner grith in cement concrete using extra cement including forms, moulds, mitred/stopped ends etc.
Dismantling wall and ceiling boards (fibre, pulp, insulation, etc) or insulation board/slabs/blankets, any thickness, including cover fillets
M&L in repair for 4 mm thick Non asbestos fibre cement building boards fixed or laid/inserted to timber/GI/Aluminium frame work with screws
S&F Anodised aluminium snap grid frame work for false ceiling for size of grid 605 x 605 mm all as specified
Taking down chowkat with shutter exc. 1.5sqm and n.exc 4sqm each
M&L for PCC (1:3:6) type C-1 with using 20mm graded stone aggregate as in bed blocks for fixing holdfast or filling hollow space of steel frame etc all complete as specified and as directed.
M& L Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete
Mild steel, plain, black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required covering to door shut ters; covering to door chowkats (frames); chullah hoods; water tanks; water troughs; ducts; urinal troughs and funnels, etc. cut to size edges beaded if directed, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel members, etc., with plain 40 mm lap joints or welded/ riveted seams including bending, turning up, mitred angles, stopped ends, outlets, etc. as required
S&F Steel ventilators with centre hung shutter including two pairs of brass cup pivots, catch spring and pulley wheel, complete all as specifed.
Supply & fix as for steel windows with side hung shutters including box type hinges with steel handle, and steel peg stay complete with glazing bars, dovetailed or welded all as directed by the Engr-in-Charge.
All as per item No 36 here-in-before but without glazing bars.
M&L for Framed work such as grills, framed guard bars,for window by welding it to existing window frame and similar work con- forming to Fe.290.Gde-E-165
M & L preparation of old surface & applying one coats of synthetic enamel paint wooden surfaces exc 10 cm girth all as specified and directed..
M&L PCC (1:4:8) type D2 (using 40 mm graded stone aggregate) for fdn/ mass concrete complete all as specified and as directed by Engr-in-Charge.
M &L for Stone Hardcore of gauge n exc. 63 mm, spread and levelled in layers n exc.15 cm thick, watered and rammed to a true surface complete all as specified and as directed by the Engr-in-Charge.
M&L for 100 mm thick cement concrete type B1, 1:2:4 (20mm graded aggregate) as in base for flooring / interlocking flooring etc for vehicle to move complete all as specified and as directed.
M & L for forming 12mm thick Expansion joints filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, Grade ‘A’
Excavation in trenches, n exc 1.5 mtr wide and n exc 1.5 mtr in depth for foundation etc. or for shafts, wells, cesspits, manholes, pier holes etc. n exc 10 Sqm on plan and n exc 1.5 mtr in depth and getting out in soft/loose soil complete all as specified and as directed by Engr-in-Charge.
M&L RCC 1:1.5:3 Type B1 (Nominal Mix) (20 mm graded aggregate) in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed.
M&L TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.
M&L for Formwork to flat fair finished to soffits of suspended slabs such as roof slabs, floor slabs, landings , shelf and similar work; not exceeding 200mm thick (Horizontal or sloping)
M&L for Cement concrete type B- 2,1:2:4 (40mm graded aggregate) 100mm thick concrete flooring ramp flooring with chequered finishing complete all as specified and as directed.
Supply and fixed sinks without drainage board made of stainless steel 1mm thick sheet plugs, washers and waste pipe, including a pair of cantilever brackets embedded in wall with suitable size of PCC (1:3:6) type C-1 blocks and connecting union to pipe of overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm all complete as specified and as directed. (Make: NIRALI OR EQUIVALENT APPROVED MAKES).
S&F vitreous china wash basin, white, flat back, size 550x400m excluding taps, waste , including chain & plug & porcelain stopper ,brackets, cutting for pinning in ends of bracketes or erecting stand and fixing and supply and waste pipe complete all as specified and directed
S&F central hole basin mixer for WHB complete all as specified and directed.
S&F 1.00 mm thick stainless steel plate rack of size 31"x30"x10" complete all as specified and directed. (Make - Model No BSKPR-314 of Blue Star/Nirali or its equivalent make)
M& l for two coat of Oil bound distemper on new wall surface including preperation of the surface all as directed and specified.
M&L for applying 1.0mm thick wall care putty on new or old wall surface all as directed and specified complete.
S&F for 15 mm bore stop cocks fancy type, chromium plated reduce body, long shank, cap (concealed type) screwed down high pressure screwed both ends for iron pipe or for union etc as in repair.
S&F angle valve, fancy type chromium plated, brass, 15mm bore complete all as specified and directed.
S&F bib taps long body 15mm bore fancy type chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.
Cutting chases, pinning in, making good to facing where required and pointing in CM 1:3 for concealed water tubing conduit wiring etc and making good, cutting n.exc 10cm girth as in stone or concrete block walls.
M & L for steel tubing medium grade,galvanised fitting fixed complete to walls and ceiling or floor complete for this following. (a) Bore tubing 15mm
(b) Bore tubing 20mm
Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc.
M&L for non-skid ceramic coloured (400x400x7 to 8 mm thick) tiles set and jointed in neat cement slurry pointed in white or coloured cement to match in floor over 15mm thick screed bed in CM(1:6) all as specified and directed by Engr-in-charge
M&L for glazed coloured ceramic tiles (450x350x7mm thick) on vertical surfaces such as skirting/dado set and jointed in neat cement slurry pointed in white or coloured cement to match over 15mm thick rendering in CM(1:4) all as specified and directed by Engr-in-charge.
M&L for brick work with sub class 'B' bricks using old size bricks, straight or curved on plan to any radius, built in CM 1:4 as in half brick thick wall complete all as specified and directed.
M&L for RCC type A1,1:1.5:3 (Nominal Mix) using 20mm gradded aggregate Slabs supported on walls, beams and columns in floors, shelves, platform, lintel, deck slabs and the like
M&L for TMT bar 8 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips
S & F 15mm bore PVC Connection with PTMT nut of length 600 mm complete all as specified and directed
S& F for 75 mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and as directed.
S & F 50 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls.
S & F 50 mm bore PVC (SWR) bends of any radius.
Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc for taking credit ( credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc complete all as specified and as directed.
M&L concealed point wiring with FRLSH PVC insulated unsheathed multistranded copper conductor,conforming to IS-694 of size 1.50 sqmm nominal cross sectional area single core drawn in and including 20/25mm size 'medium grade' PVCPVC Conduit pipe and fittings, including, pressed steel concealed terminal switch boxes not less than 1.2mm thick of reqd size factory made duly painted inside and outside with two coats of black bituminous paint over one coat red oxide primer, 3mm thick plastic laminated sheet top cover (ISI Marked) fitted with chromium plated brass screws & washers complete including 1.50 sqmm nominal cross sectional area PVC insulated unsheathed multistranded copper conductor green as earth wire connected to earth dolly with all accessories complete all as specified and directed. (a) (a) One light point controlled by one way switch 5/6 amps.
(b) One 3 pin socket outlet , 5 Amps on same board controlled by one way switch 5/6 amps.
(c) One 3 pin socket outlet , 5 Amps on independent board controlled by one way switch 5/6 amps.
All as per item no 72 here in above but copper conductor of size 2.5 sqmm for 15/16 Amp socket on indepentent board complete all as specified and directed.
S&F switch piano flush type 5/6 amps single pole one way complete all as specified and directed.
S&F socket outlet 2 in 1, 3 pin 5 Amps complete all as specified and directed.
S&F switch socket combination 2 in 1, 3 pin , 5 and 15 amp flush type universal complete all as specified and directed.
S&F ceiling rose, bakelite, surface type, 220/240 volts, three terminals complete all as specified and directed.
S & F Wall monted slim LED batten 20W, (4 feet) 5700K integrated decorative caps with integrated high electricity electronic driver and surge suppressor of 2 KV or more luminarire efficiency > 95 lumens/ watt, power, power factor > 0.90 Operating range - 140 to 270v, 50Hz, fixed 02 Nos of PVC round/ square blocks, cscrews etc complete with all accessories internally prewired and connecting up with and necessary taking down the old unserviceable fitting. complete all as specified and directed by Engr-in- charge.
S & F LED street light fittings 35 watt in aluminium PDC housing, toughned glass cover with IP66 protection complete all as spedified and as directed.
M&L for street light bracket made out of GI pipe light grade 25 mm dia 1.2 mtr length bent to shape and reduced to required size at top upto 1.2 mtr length by cutting, welding and well finishing including MS clamp of flat iron of size 25 x 5 mm suitable length 2 Nos complete with drilling hole, fixing with runts bolts and washers including painted with two coats aluminium paint over a coat of red oxide primer.
S&F Sheet metal enclosure for 8 way Distribution Boards (DB’s), double door, single pole & neutral with 200 amps rated bus bar, IP-20 protection suitable for fixing MCB"S/lsolators complete including taking down the old one complete all as specified and directed by Engr-in-Charge.
S&F MCB, Single pole & neutral 32 amps, 240 volts, ‘C’ curve, 10 KA all complete the old all as specified and directed by Engr-in-Charge. Charge.
S&F MCB, Single pole, 5 to 32 amps, 240 volts, ‘C’ curve, 10 KA complete all as specified and directed by Engr-in-Charge.
M &L for Earthing complete with GI earth plate electrode 600x600x6mm thick buried directly in ground (Earth pit not less than 2.25M deep below normal ground level) with top edge of the plate not less than 1.5m below normal GL. Connected to galvanized earth lead wire 4mm dia by means of nut, bolt, check nut and washers including necessary excavation and earth work in soft/loose soil, GI protection pipe light grade 15mm bore for protecting the GI wire mesh funnel alternate layer of charcoal dust, and salt PCC pit 1:3:6 type C1 using 20mm graded stone aggregate and 50mm thick RCC 1:2:4 type BO using 20mm graded stone aggregate cover re-inforced with 8 mm dia MS TMT bars 80mm C/C both ways complete all as specified and shown in Electrical plate No.3 SSR part-1 and connected to the earth point and testing complete all as specified and directed by Engr-in-Charge.
Supply, laying, jointing & testing in trenches or passing through pipe, 1100 volts grade, XLPE insulated PVC bedded, galvanized steel strip or wire armoured LT electric power UG cables, heavy duty with stranded aluminium conductor of cross sectional area 10 sqmm 2 core with and including all fixing & connecting accessories such as Alluminium cable lugs, cable gland, nut, bolts, washer etc complete as specified and as directed. (Make: Havells/KEI / POLYCAB/RR Kable/Gloster cable) (NOTE: Earthwork & Excavation, GI pipe, bricks for protection etc shall be measured and paid separately under relevant items of this schedule 'A').
Returning, filling in, including spreading levelling watering and well rammming in layers not exceeding 25 cms in depth complete all as specified and as directed.
Removing surplus soil to a distance not exceeding 50 mtr and depositing where directed at a level not exc 1.5 mtr above the starting point complete all as specified and as directed.
Supply and lay dry river sand filling for under ground cable protection with a layer of 8cm deep before laying and 15cm covering above the top edge of cable after laying complete all as specified and as directed.
Supply and laying sub class B bricks of size 25cmx12.5cmx7.5cm (+/-10% tolerance) for protection of UG cable with width equal to length of bricks as mechanical protection laid dry and flat complete all as specified and as directed.
M & L for horizontal boring across the existing road without disturbing the road surface for inserting GI pipe complete all as specified and as directed. Note :- (i) Removal of surplus soil shall be deemed to be include in the unit Rate. (ii) GI pipe will be measured and paid separately under relevant item of Sch 'A'.
M&L for 40 mm bore steel tubing light grade ISI marked for protection of cable including necessary joints complete all as specified and as directed. Make: Tata/Jindal/Bansal
M&L for point wiring complete with 4.0 Sqmm multistranded copper conductor single core PVC insulated unsheathed FR-LS cable 1100 volts grade (ISI marked) with proper colour coding drawn through and including double lock PVC casing caping and its accessories (ISI marked) on wall/fixed to roof, ceiling etc including provision of 4.0 Sqmm PVC insulated multistranded unsheathed copper conductor cable FR-LSH (ISI marked) as earth continuity conductor connected to common earth dolly, PVC switch box heavy duty upto a size of 200 x 300mm and above of appropriate sizefixed on walls/ other surface, ISI marked for housing switches, socket outlets, fan regulators etc duly earthed. Connections of cable with MCBs or bus bar shall be done through proper size copper/brass thimbles. Where casing caping is not feasible ie on surface of roof etc, conduit shall be fixed on surface with necessary saddles at no extra cost all as specified and as directed for the following :- (a) One socket out let 15/16 amps point on the independent board complete all as specified and directed.
S&F of socket outlet 2 in 1, 5 Pin, 5/15 amp, multipurpose 230 volt flash type complete all as specified and directed by Engr-in-Charge.
S&F switch piano flush type 15/16 amps single pole one way complete all as specified and directed.
S&F Sheet metal enclosure for 2 way Distribution Boards (DB’s), single door, single pole & neutral with 200 amps rated bus bar, IP-20 protection suitable for fixing MCB"S/lsolators complete including provision of blanking plates as required and taking down the old one complete all as specified and directed by Engr-in-Charge.
Supply and Install portable high pressure vehicle washer having 20000 rpm motor, pressure 7 bar, 5.5 l/min flow rate, power consumption 1450 Watt, 240V, 50Hz complete with provision of anti friction and high pressure hose pipe which can withstand 40 Mpa having nozzle arrangement to adjust water shape to meet the various needs of washing complete all as specified and directed by Engr- in Charge (Make HIRA Model-XP-PW-45A or equivalent
Material and labour for staging and shed for pressure washer and motor assembly including brickwork (1.5 x0.6 x 0.5 m)with sub- class ‘B’ old size bricks using cement mortar, fabrication/welding and fixing of angle iron (30x30x3 mm, 8.4 Kg) structure to fix galvalume sheet (0.25 sqmm thick) using proper screws and washers for fixing shed, Rendering 10mm thick Cement plaster(1:6) on fair faces of brick work complete al as specified and as directed.
Supply and lay pipe galvanized, “Medium class”, including fittings 25 mm dia as directed by Engineer-in-charge.
Supply and fix Gun metal ,globe Gate Valves with iron wheel head of 25 mm dia bore complete with all accessories all as specified and directed by Engineer-in-charge.
M& L for cutting existing GI pipe alteration or addition of 40/50 mm dia bore for inerstion of reducer Tee complete with all accessories all as specified and directed by Engineer-in-charge.
Supply installation, commissioning and testing of electric water heater, storage vertical type, BEE 5 star rated 25 ltrs capacity 230 volts AC 50 Hz comprising of high wattage heating element for instant heating extra thick SS inner tank of superior 304 grade, rust & shock proof ABS outer body, non- ferrous pressure plate with and including provision of 04 Nos grouting bolts suitably flush to wall or any other surfaces and connection pipe for hot and cold water supply 25 lts BEE 5 Star rated complete stranded copper conductor cable/ flexible chord complete all as specified and as directed. Make:- Havells/ Crompton/Bajaj or Eqvivalent
S&F stop valve but fancy type, chromium plated, screwed down (CP) of size 15 mm fancy type complete all as specified and directed.
M&L bib taps , cast copper alloy with butterfly handle , screwed down, screwed for iron pipe or for brass ferrule and fixed for bib tap 15 mm dia fancy type all as specified and as directed.
M&L for point wiring complete for one power point for one metal plug & socket for AC or one socket for geyser point on independent board with 4.0 Sqmm multistranded copper conductor single core PVC insulated unsheathed FR-LS cable 1100 volts grade (ISI marked) with proper colour coding drawn through and including non-metallic rigid PVC medium grade conduit not less that 20mm dia and conduit accessories (ISI marked) concealed in wall/fixed to roof, ceiling etc including provision of 4.0 Sqmm PVC insulated multistranded unsheathed copper conductor cable FR-LS (ISI marked) as earth continuity conductor connected to common earth dolly, including cutting chases of existing wall for conduits and fixing for Pressed steel concealed sunken boxes not less than 1.2mm thick of required size factory made duly painted inside and outside with two coats of black bituminuous paint over one coat top cover fitted with chromium plated brass crews and washes boxes and making good to the disturbed surface of wall/floor and matching with existing specifications. Connections of cable with MCBs or bus bar shall be done through proper size copper/brass thimbles.
S & F Socket outlet 2 in 1,3 pin 15 Amp, flush type complete all as specified
S & F switch piano type one way, flush type 15 Amp complete all as specified
S&F MCB distribution boards (DBs) with sheet metal enclosure, single door, IP 43 protection, 240 Volts,2 way, single pole and neutral, with 200 Amps rated copper bus bar (as per OEM), neutral link, ertth link earthing studs, suitable for fixing MCBs, without MCBs fixed flush to wall/other surface complete all as specified and as directed.
S&F MCB, Single pole & neutral, 32 to 63 amps, 240 volts, ‘C’ curve, 10KA all complete with and including taking down old unsv one as specified and as directed.
Material and labour for concealed sub-main wiring alongwith earth wire of size of 2 x 4.0 sq. mm + 1 x 4.0 sq. mm earth wire, ISI marked, FRLS, PVC insulated, multi stranded, copper conductor, single core cable drawn through and including PVC rigid conduit (medium grade) of of size not less than 25 mm with all fittings and accessories ISI marked including cutting chases for conduits & making good to walls, floors etc complete, including taking down old unsv aluminium submain wiring all as specified and as directed. NOTE : Two runs of 4 sqmm conductor for main and one run of 4 sqmm conductor as earth wire with proper colour coding including one run run of PVC conduit shall be measured as one unit length. Connections of cables wit MCBs or bus bar shall be done through appropriate size brass/ copper thimbles
S. G. CONSTRUCTION
P CHAKRABORTY CONSTRUCTION
N K Construction
SHRI MANOIRANJAN BISWAS
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .