Loading…
Loading…
Tender Value
₹4.5 Cr
EMD Value
₹4.5 L
Closing Date
22 Apr 2026, 6:00 pmClosed
Similar tender results from the same govt authority in the past 3 years.
Chief Officer, Dhrol Nagarpalika, Dhrol
Construction Work Of Paving Block Road, C.C. Road, Retaining Wall, S.F. Nagarpalika Office Building, Nagarpalika Office Building Furniture, Furnace Hall, Renovation Of Smashan Shed, Cremation Furnace, Toilet Block, Pipe Culvert And PVC Pipeline, As Per Various Location, At. Dhrol, Dist.: Jamnagar Under SJMMSVY (UDP-88) Year-2025-26
290241
Mar-26/SJMMSVY
Open
Civil Works
Jamnagar
3 documents required · 3 mandatory
₹7,080
Chief Officer, Dhrol Nagarpalika, Dhrol
₹4.5 L
30 Mar 2026
30 Mar 2026
30 Mar 2026
22 Apr 2026
30 Mar 2026
NAME OF WORK:- CONSTRUCTION WORK OF PAVING BLOCK ROAD, C.C. ROAD, RETAINING WALL,
S.F. NAGARPALIKA OFFICE BUILDING, NAGARPALIKA OFFICE BUILDING FURNITURE, FURNACE HALL,
RENOVATION OF SMASHAN SHED, CREMATION FURNACE, TOILET BLOCK, PIPE CULVERT AND PVC
PIPELINE, AT VARIOUS LOCATION, AT. DHROL
TOTAL AMOUNT PUT TO TENDER
TOTAL AMOUNT PUT TO TENDER
PERCENTAGE RATE TENDER
Sr.No. Schedule Amount
1 Schedule - "B"- 1
2 Schedule - "B"- 2
3 Schedule - "B"- 3
4 Schedule - "B"- 4
5 Schedule - "B"- 5
6 Schedule - "B"- 6
7 Schedule - "B"- 7
8 Schedule - "B"- 8
9 Schedule - "B"- 9
10 Schedule - "B"- 10
11 Schedule - "B"- 11
12 Schedule - "B"- 12
13 Schedule - "B"- 13
14 Schedule - "B"- 14
15 Schedule - "B"- 15
Total Amount Rs.
Total Amount Rs.
I/We am/are willing to carry out the work @ _______% Above / Below___________Percentage (should be writen
in figures and words) of the Estimated rates mentioned above amount of my /our Tender works out as under.
Estimated Amount Estimated Amount
Put to Tender Rs. 4,54,39,283=00 Put to Tender Rs. 4,54,39,283=00
Total Rs. Total Rs.
(In Words (In Words
Signature of the Contractor
Consl. Engineer Engineer
"DESIGN POINT" Dhrol Nagarpalika
Chief Officer President
Dhrol Nagarpalika Dhrol Nagarpalika
DHROL NAGARPALIKA - DHROL
DIST. : JAMNAGAR
SCHEME :- SJMMSVY (UDP-88) YEAR-2025-26
NAME OF WORK :- CONSTRUCTION WORK OF PAVING BLOCK ROAD
Location Chart For Schedule-B1
Sr No. Location Length Width
Jamanar - Rajkot Highway Triangle to Hathnala Side Road
1 Welding Febrication to Raghuvir Agro 45.50
2 Shiv Hardware to Dharti Auto Service 45.00
3 Maldhari Hotel to Raj Auto Garage 56.00
4 Krishna Deluxe to Dharti Electrical 87.00
5 Laxmainarayan Complex to Vishwakarma Carrier 60.00
6 Saurastra Gramin Bank to Old Municiple Building 31.00
7 Life Care Hospital 20.00
8 Shiv Shakti Electrical to Mahalaxmi flour mill 39.00
9 Praneeti Farmacy to Praneel Provision Store 17.00
10 Rozi Auto Store to behind Rajdeep Hall 50.00
11 Gandhi Chowk, Dr. B.R. Ambedkar Chowk Around 9.00
13 W-2, Garediya Road to Dharmasi Vasrana House 650.00
14 W-2, Radhe Park Karabhai Varu & Hiteshhai Vallabhbhai Gohil House 13.00
16 W-3, Khataki Vash, near Lalabhai House 41.00
Bal Hanuman Narber Street, Darbargadh near Water Tank
17 W-4, Baal Hanuman Temple to Maheshbhai Vaghela House 223.00
18 W-4, Badubhai House Street 13.00
19 W-4, Faruk Satara House to Barber Street 9.30
20 W-4, near Community Hall 33.00
21 W-4, Vagher Street 150.00
22 W-4, H.K. Pan Street 44.00
W-4, Haveli Street to Vaidhnath Chowk to Meman Chowk to Noor Street
W-4, Vallabh Sadan to Keshari Nandan Hanumanji Temple(Kotha Vadi
24 W-4, Keshari Nandan Hanumanji Temple to Noor Street Corner 186.00
W-4, Vakmikivas Limbabhai House
25 W-4, Harsurbhai Parmar House to Limbabhai House 35.00
26 W-4, Bipinbhai Parmar House to Lachchhabhai Safaykamdar House 50.00
W-4,SBI Road, Gebanshah Dada Mijavar House Street
27 W-4, Bhuddhapir Street 30.00
W-4, SBI Road, Bharwad Street Corner to Sindhabhai House
28 W-4,Bharwad Street Pababhai Hosue 20.00
29 W-6, Dwarkadhish Society Main Road 150.00
30 W-6, Shivam Park, Rajeshbhai House to Atulbhai House 90.00
32 W-6, Shivam Park, Ashokbhai House to Somanath Genral Store 49.00
W-6, Tulsi Park, Nathabhai Parsotambhai Gadara House to Ashwinbhai
34 W-6, Avadh Nivas to Sadguru Guest House 25.00
36 W-6, Bhupatbhai House to Vijaybhai Humbal House 42.00
37 W-6, Bird Feeding Tower to Vasantbhai Satara's House 41.00
39 W-7, Rashikbhai House to Arajanbhai Bambhva 275.00
W-7, Near Trikon Baug, Behind Petrol Pump, Vijaybhai Sojitra House to
Vijanand Society Main Road
Stamp with Signature of Contractor
Consl. Engineer Engineer
"DESIGN POINT" Dhrol Nagarpalika
Chief Officer President
Dhrol Nagarpalika Dhrol Nagarpalika
DHROL NAGARPALIKA - DHROL
DIST :- JAMNAGAR
SCHEME : SJMMSVY (UDP-88) YEAR-2025-26
NAME OF WORK:- CONSTRUCTION WORK OF PAVING BLOCK ROAD
LOCATION:- As Per Location Chart, At. Dhrol
SCHEDULE - "B-1"
PERCENTAGE RATE TENDER
Item No. & Description Quantity Rate Per Amount
Box cutting the road surface to proper slope and camber for making a
base for road work including ramming the excavated stuff and despositing
on the road side slope as directed up to all lead and sretta. 4353.10 111.85 Cumt.
Providing and laying cement concrete 1:3:6 (1 cement : 3 coarse sand :
Machine cut stone aggregate 40mm nominal size ) and curring complete
including cost of formwork in (a) Foundation and plinth 2192.20 3268.36 Cumt.
Providing and fixing Pre-cast rubber dye / steel dye inter locking concrete
block 60mm thick with grade of concrete M-300 punmatic compressed by
mechanically pressed and as per approved design confirming to IS
15658:2006 including 35mm sand layer for levelling and filling the joints
with sand in proper line and level asper guidlines of IRC : 63-2018 etc
(Agency must Fill the rate of 80mm thick & M-300 grade paver block
instead of 60mm paver block) 18268.30 707.55 Sqmt
Providing cement vata (10cm. x 10 cm. size) quarter round in cement
mortar 1:1 including neat cement finishing, watering etc. complete. 5953.40 24.28 Rmt
Demolition and disposal of unserviceable materials with all lead and lift. (i)
Cement concrete. 375.80 637.86 Cumt.
Dismentaling tiled of stone floors laid in mortar including stacking of
serviceable materilas and disposal of unserviceable materials with all lead
and lift. 3757.80 50.28 Sqmt.
Tracing of old Manhole. All Types Of Manhole. 99.00 1214.02 No.
Modification of Existing House Connection Chambers, Risening up to
23cm. average of 0.23m wide R.c.c Copping with Inside 15mm Thick
Cement Plaster, Curing and Dismentaling existing Chamber's Precast
cement frame and Cover and also fitting the copping work as directed as
required and also refitting of existing house connection chamber's coller
and cover as required. 198.00 909.00 No.
Total Amounts Rs (A)...……
Total Amounts Rs (A)...……
Deduct Credit Amounts Rs (B)...……
Net Amounts Rs (A-B)...……
Stamp with Signature of Contractor
Consl. Engineer Engineer
"DESIGN POINT" Dhrol Nagarpalika
Chief Officer President
Dhrol Nagarpalika Dhrol Nagarpalika
DHROL NAGARPALIKA - DHROL
DIST :- JAMNAGAR
SCHEME : SJMMSVY (UDP-88) YEAR-2025-26
NAME OF WORK:- CONSTRUCTION WORK OF C.C. ROAD
LOCATION:- Barnala to Vali School Street No - 2, At. Dhrol
SCHEDULE - "B-2"
PERCENTAGE RATE TENDER
Item No. & Description Quantity Rate Per Amount
Box cutting the road surface to proper slope and camber for making a
base for road work including ramming the excavated stuff and despositing
on the road side slope as directed up to all lead and sretta. 326.30 111.85 Cumt.
Providing & laying spreading and compacting 100mm thick WBM Grade - I
of B.T.M.C. metal 45mm to 90mm size including using 29% (22+7%) filler
i.e. stone screeing 13.2 mm at the rate 0.27 Cumt. & stone dust at the rate 108.80 1164.53 Cumt.
No. 3 including spreading in uniform thickness, hand packing, rolling
Providing and laying cement concrete 1:3:6 ( 1 cement : 3 coarse sand :
Machine cut stone aggregate 40mm nominal size ) and curring complete
including cost of formwork in (a) Foundation and plinth 108.80 3268.36 Cumt.
Providing and Laying in position Controlled Concrete M-200 grade
concrete for using cement content as per approved design mix, improve
workability without impiring strength and durability as per direction of the
engineer in charge. (min cement level as per latest ID: 456 shall be
maintained) for 150mm thick trimix C.C Road with trimix vaccume
dewatering system work with power trowling sheet form with M.S Channel,
surface vibrator with providing road expansion joint having size
6mmx50mm by concrete cutter machine and filled with bitumen, finishing
with floor hardener necessary all equipments, all labour charges complete.
Total Amounts Rs...……
Total Amounts Rs...……
Stamp with Signature of Contractor
Consl. Engineer Engineer
"DESIGN POINT" Dhrol Nagarpalika
Chief Officer President
Dhrol Nagarpalika Dhrol Nagarpalika
DHROL NAGARPALIKA - DHROL
DIST :- JAMNAGAR
SCHEME : SJMMSVY (UDP-88) YEAR-2025-26
NAME OF WORK:- CONSTRUCTION WORK OF C.C. ROAD
LOCATION:- Barnala to Karabhai Mangabhai House, At. Dhrol
SCHEDULE - "B-3"
PERCENTAGE RATE TENDER
Item No. & Description Quantity Rate Per Amount
Box cutting the road surface to proper slope and camber for making a
base for road work including ramming the excavated stuff and despositing
on the road side slope as directed up to all lead and sretta. 292.50 111.85 Cumt.
Providing & laying spreading and compacting 100mm thick WBM Grade - I
of B.T.M.C. metal 45mm to 90mm size including using 29% (22+7%) filler
i.e. stone screeing 13.2 mm at the rate 0.27 Cumt. & stone dust at the rate 97.50 1164.53 Cumt.
No. 3 including spreading in uniform thickness, hand packing, rolling
Providing and laying cement concrete 1:3:6 ( 1 cement : 3 coarse sand :
Machine cut stone aggregate 40mm nominal size ) and curring complete
including cost of formwork in (a) Foundation and plinth 97.50 3268.36 Cumt.
Providing and Laying in position Controlled Concrete M-200 grade
concrete for using cement content as per approved design mix, improve
workability without impiring strength and durability as per direction of the
engineer in charge. (min cement level as per latest ID: 456 shall be
maintained) for 150mm thick trimix C.C Road with trimix vaccume
dewatering system work with power trowling sheet form with M.S Channel,
surface vibrator with providing road expansion joint having size
6mmx50mm by concrete cutter machine and filled with bitumen, finishing
with floor hardener necessary all equipments, all labour charges complete.
Total Amounts Rs...……
Total Amounts Rs...……
Stamp with Signature of Contractor
Consl. Engineer Engineer
"DESIGN POINT" Dhrol Nagarpalika
Chief Officer President
Dhrol Nagarpalika Dhrol Nagarpalika
DHROL NAGARPALIKA - DHROL
DIST :- JAMNAGAR
SCHEME : SJMMSVY (UDP-88) YEAR-2025-26
NAME OF WORK:- CONSTRUCTION WORK OF RETAINING WALL
LOCATION:- Sarvajanik Smashan, At. Dhrol
SCHEDULE - "B-4"
PERCENTAGE RATE TENDER
Item No. & Description Quantity Rate Per Amount
Excavation for foundation in sand, gravel clay, soft soil ans murrum etc.
including shorting, strutting and dewatering as necessary ans disposing of
the excavated stuff as directed (A) Depth upto 3.0m. And Lead Up To
Providing and filling in foundation with ordinary Cement concrete M-100
mix and providing necessary vertical pin headers including formwork,
vibrating, ramming and curing complete. 3.30 3362.25 Cumt.
Providing & Laying controlled cement concrete M-200 for R.C.C Return
as per drawing including necessary shutering laying, vibrating, height
from 0.00 to 5.00 m. (a) Pier, (b) Abutment, (c) R.c.c Return. 76.00 5217.59 Cumt.
Providing and laying in position FE 500D TMT bar reinforcement including
cutting, bending, hooking and tying complete as per detailed drawings for
the following. (A) Piers (B) Abutments (C) R.C.C. Returns 0.31 73858.69 M.T.
Providing and laying weep holes in abutment and return by using A.C.
pipes of 100mm diameter including laying in proper grade and jointing
etc. complete as per detailed drawings. 23.00 88.76 Nos.
Total Amounts Rs...……
Total Amounts Rs...……
Stamp with Signature of Contractor
Consl. Engineer Engineer
"DESIGN POINT" Dhrol Nagarpalika
Chief Officer President
Dhrol Nagarpalika Dhrol Nagarpalika
DHROL NAGARPALIKA - DHROL
DIST :- JAMNAGAR
SCHEME : SJMMSVY (UDP-88) YEAR-2025-26
NAME OF WORK:- CONSTRUCTION WORK OF S.F. NAGARPALIKA OFFICE BUILDING
LOCATION:- Kamla Nehru Park, At. Dhrol
SCHEDULE - "B-5"
PERCENTAGE RATE TENDER
Item No. & Description Quantity Rate Per Amount
Providing & Laying controlled cement concrete M-250 and curing
complete including the cost of formwork and exluding the cost of
reinforcement for reinforced concrete work in Beam (C) Slabs, Landings,
Shelves, Balconies, Lintel, Beams, Girders and Cantilever upto floor two
level. S.F. 22.96 7058.20 Cumt.
Providing & Laying controlled cement concrete M-250 and curing
complete Including the cost of formwork and excluding the cost of
reinforcement for reinforced concrete work in Lintel (C) Slabs, Landings,
Shelves, Balconies, Lintel, Beams, Girders and Cantilever upto floor two
level. S.F. 3.99 6650.16 Cumt.
Providing & Laying controlled cement concrete M-250 and curing
complete Including the cost of formwork and excluding the cost of
reinforcement for reinforced concrete work in Chhajja (C) Slabs,
Landings, Shelves, Balconies, Lintel, Beams, Girders and Cantilever upto
floor two level. S.F. 1.55 7452.10 Cumt.
Providing & Laying controlled cement concrete M-250 and curing
complete including the cost of formwork and excluding the cost of
reinforcement for reinforced concrete work in Column (D) Columns,
Pillars posts and struts upto floor two level S.F. 17.16 8094.46 Cumt.
Providing & Laying controlled cement concrete M-250 and curing
complete Including the cost of formwork and excluding the cost of
reinforcement for reinforced concrete work in Slab (C) Slabs, Landings,
Shelves, Balconies, Lintel, Beams, Girders and Cantilever upto floor two
level. S.F. 37.43 6838.02 Cumt.
Providing & Laying controlled cement concrete M-200 and curing
complete Including the cost of formwork and excluding the cost of
reinforcement for reinforced concrete work in Stair Case (E) Staircases
excluding landing up to floor two level. S.F. 3.16 7263.23 Cumt.
Providing TMT Bar FE 500D reinforcement for R.C.C. work including
bending, binding and placing in position complete upto floor two level 12972.54 79.43 Kg.
Brick work using common burnt clay building bricks having crushing
strength not less than 35 kg./Sq.Cm. in Superstructure in Cement Mortar
1:5. (1- Cement : 5 -fine sand) Extra for brick work in superstructure
above plinth level upto floor two level (B) Conventional 64.66 4599.16 Cumt.
(i) Half brick masonry in common brunt clay building bricks having
crushing strength not less than 35 Kg/Sq.Cm. in Cement mortar 1:4 (1
Cement 4 coarse sand) in superstructure above floor two level (B)
Conventional 26.79 696.50 Sqmt.
Providing 15 mm thick cement plaster in single coat on fair side
brick/concrete wall for interior plastering up to floor two level finished even
and smooth in with Floating coat of neat cement. (i) cement Mortar 1:3 (1
cement : 3 Sand) 585.62 236.51 Sqmt.
Providing 10mm thick cement plaster in single coat on brick/concrete
walls for interior plastering upto floor two level and finished even and
smooth in (i) Cement mortar 1:3 (1-cement:3-sand) Extra over items 58 to
64 for finishing with a floating coat of neat cement slurry. 328.06 190.34 Sqmt.
20 MM thick sand faced cement plaster on walls upto height 10meters
above ground level consisting of 12 MM thick backing coat of Cement
Mortar 1:3 (1-Cement : 3-Sand) and 8MM thick finishing coat of Cement
Mortar 1:1 (1-Cement : 1-Sand) etc. complete. 389.86 323.21 Sqmt.
Providing and laying Black Granite stone slab flooring over 20mm
(average)base of cement mortar 1:6 (1-cement : 6 coarse sand) or L.M.
1:1.5(1- lime putty : 1.5 - coarse sand) laid and jointed with gray cement
slurry including rubbing and polishing complete. (A) Granite slab 25mm
thick 105.85 3007.78 Sqmt.
P & L 24" x 24" vitrified 8 mm thick tile flooring over 20 mm (average)
base of cement mortar 1:6 (1 cement 6 coarse sand) on new surface or
fixing on existing flooring by adhesive material including dismentaling of
existing flooring and jointed with color cement slurry including finised with
flush pointing & cleaning the surface etc. complete for light shade
Providing throating of plaster drip and moulding to R.C.C. Chhajja. 45.10 44.07 Rmt.
Labour Charge Full Round Edge for Granite 237.94 43.43 Rmt.
Providing and laying Vitrified tiles 8 to 10 mm thick , 24'' x 24'' in skrting
risers of steps and dedo on 10mm thick cement plaster 1:3 (1-cement : 3-
coarse sand) and jointed with white cement slurry 14.45 1195.02 Sqmt.
Providing and laying white glazed tiles 6mm thick in flooring treads of
steps and landing laid on a bed of 12mm thick cement mortar 1:3 (1-
cement : 3-coarse sand ) finishing with flush pointing in white cement. 8.36 964.48 Sqmt.
Providing and laying coloured glazed tiles of the size 300 mm x 200 mm x
8 mm / 300 mm x 450 mm x 8 mm in skirting, risers of steps and dedo on
10 mm. thick cement plaster 1:3 (1 cement : 3 coarse sand) & jointed with
white cement slurry. 94.60 1523.67 Sqmt.
Providing and laying broken China Mosaic Flooring for Terrace using
12mm to 20mm broken pieces of glazed tiles to be laid over cement
mortar 1:3 to plain or slope and to be tempered to bring mortar crème out
upto surface using white cement including rounding off junctions and
extending them up to 15cm. along the wall, clearing with water and oxalic
acid etc. as directed. 252.95 779.70 Sqmt.
Providing and mixing Dr. Fixit water proofing material in cement concrete
in mix proportion recommended b the manufacturers. 45.53 49.16 Lit/Kg.
Providing and laying cement concrete flooring 1:2:4 (1 cement :2 course
sand : 4 graded stone aggregate 20mm nominal size) laid in one layer
finished with a floating coat of neat cement (B) 50mm thick 252.95 347.15 Sqmt.
Providing and fixing 35mm thick Flush Door both side 1mm thick
Laminate Fitting materials 304 Grade S.S. 4" Hinges, S.S. Handle, S.S.
Stoper and Edge Side of Indian teakwood battens Patti, 15CM long S.S.
Handle Fevico 998 and Door Closer Heavy Duty, S.S. Door Stopper and
S.S. Door Stop, S.S. 25 Cm. long Door Aldrop and including of all type
labour and necessary fitting material etc. Complete.
Providing and fixing window having extruded aluminum Colour anodized
section frame main outer size 95mm x 24mm x 1.17mm (of Jindal
Section no:2459 @ wt.of 0.738 Kg/mt), horizontal Three track member
size 92mm x 31.75mm x 1.30mm (of Jindal Section no:8688,@ Wt.1.07
Kg/mt), vertical member of size 92mm x 31.75mm x 1.50mm (of Jindal
Section no:8933,@ Wt. 1.06 Kg/mt) with sliding shutters of horizontal
member size 40 mmx18mm x1.29mm (of Jindal Section no:8947@ wt.of
0.456 Kg/mt), vertical member of size 40mm x 18mm x 1.29 mm (of
Jindal Section no:8949 @ wt.of 0.456Kg/mt/ with 5 mm thick transparent
bronze colour tinted float glass with powder coated aluminum fittings and
fixtures and transparent silicon sealant glass fixing to frame as per details
Providing and fixing FRP frame size 125x65 mm and 35mm thick FRP
shutter with wood grain raised panneled design finish shutter having extra
reinforcement on sides & edges in Gel coat finish. The core of the shutter
& frame is to be filed up with injected polyurethene foam done in situ
alongwith embedded wooden pieces for stiffening & also taking hinges &
fintures. The whole FRP frame & shutter is to be water proof weather
proof, termite proof & resistance to mild acid/alkali. Rates are to be
inclusive of S.S hinges with fastener sleeve & alluminium fixtures &
fastenings. 3.20 2019.98 Sqmt.
Providing upto floor two level precast cement concrete jali or grill 1:2:4
mix (1- Cement : 2- coarse sand : 4-graded stone aggregate 6mm
nominal size) reinforced with 1.6 mm dia. Mild steel wire including
roughening,cleaning, fixing and finishing in cement mortar 1:3 and curing
complete. (D) 75mm thick 0.81 836.62 Sqmt.
Providing and fixing M.S. grills of required pattern to wooden frames of
windows etc. with M.S. flats at required spacings and frame alround,
square or round bars with round headed bolts and nuts or by screws (A)
Plain Grill. 1288.80 111.68 Kg.
Applying priming coat over new steel and other metel surface after and
including preparing the surface by throughly cleaning, oil,grease, dirt and
other foreign matter and scoured with brushes fine steel wood, scrapers
and sand paper with ready mixed priming paint brushing red lead.
Painting two coats (excluding priming coat) on new steel and other metal
surface with enamel paint, brushing, interior to give an even shade
including cleaning the surface an even shade including cleanicn the
surface of all dirt, dust and other foreign matter. 42.96 94.39 Sqmt.
Wall painting (two coats) with plastic emulsion paint of approved brand
and manufacture on undecorated wall surface to give an even shade
including throughly brushing the surface free from mortar droppings and
other foreign matter and sand papered smooth. 913.68 86.38 Sqmt.
Finishing wall with weather proof exterior emulsion paint on wall surface
(two coats) to give an required shape even shade after thoroughly
brushing the surface to remove all dirt, and remains of loose powdered
materials.etc complete. 389.86 122.14 Sqmt.
Wall Primer of Approved Brand 1303.54 16.52 Sqmt.
Providing and fixing 0.90 mt height stainless (304 Grade) steel stair
railling by top rail of 50mm dia.x16G pipe providing vertical support of
32x32 Sq. x 16G Pipe and Hori. Supports Pipe of 16mm x 16G 4 No.
Row including grinding, cleaning and filling the welded spots with SS
finish and including of labour transportation loading, unloading and all tex
etc. complete. 14.30 3037.07 Rmt.
Providing and fixing PVC SWR Nahni trap IS 14735 for drain - 100 mm
diameter with jali of the following nominal diameter of self cleansing
design with C.I scread down or hinged grating including the cost of cutting
and making good the walls. 4.00 600.23 No.
Providing and fixing S.W. gully trap with C.I. grating brick masonry
chamber and water tight C.I. cover with frame of 300mm x 300mm size
(inside) with standard weight.(i) Square mouth traps. (A) 100mm x
100mm size P type. 2.00 1292.19 No.
Constructing brick masonry chamber for underground C.I. Inspection
chamber and bends with briocks having croshing strength not less than
35Kg. Cm2 in C.M. 1:5 C.I. cover with frame (Light duty) 455mm x
610mm intenal dimensions total weight of cover with frame to be not less
than 38Kg. (Wt. of cover 23 Kg.) and Wt. of frame 15Kg. ) (R.C.C. top
slabe with 1:2:4 mix (1-cement :2- coarse sand :4-graded stone
aggregate 20mm size) foundation concrete 1:5:10 inside plaster 15mm
thick with cement mortar 1:3 finished smooth with a floating coat of neat
cement on walls and bed concrete etc. complete.(i) Inside dimensions
455mmx 610mm and 450mm deep for single pipe line. 4.00 2932.93 No.
Providing and fixing screw down bib taps of following size.(A) Brass screw
down bib tap polished bright. (i) 15mm dia. 10.00 186.83 No.
Providing and fixing Gun metal check or non-return fullway wheel
valve.(D) 32mm dia. 2.00 314.73 No.
Providing and fixing Gun metal check or non-return fullway wheel valve.
Providing and fixing water closet squatting Pan (Indian type W.C. Pan)
size 580mm (Earthwork, bed concrete, foot reste and trap to be
measured and paid for separately) (A) Vitreous China.(I) Long pattern =
White colour 2.00 1010.65 No.
Providing and fixing 100mm size P or S trap for water closet squatting
pan including jointing the trap with the pan and soil pipe in cement Mortar
1:1 (1-Cement : 1-Fine sand)(A) Vitreous China. 2.00 340.31 No.
Providing and fixing Urinal of approved quality including connection with
trap and with integral longitudinal flush pipe.(A) Squating plate pattern
white earthenware 550mm x 300mm. 4.00 1667.31 No.
Providing and fixing wsh down water closet (European type, W.C. Pan)
with integral P or S trap including jointing the trap with soil pipe in Cement
Mortar 1:1 (1-Cement : 1-fine sand) (Seal and cover to be measured and
paid for separately) (A) vitreous China Pattern :(i) in white colour
Providing and fixing plastic seat and cover for wash down water closer
with C.P. brass hinges and rubber buffers. (B) Black plastic seal and
cover. 1.00 291.33 No.
Providing and fixing 12.5 Litres low level flushing cistern with a pair, of
C.I. or Mild brackets, complete with fittings such as lead valve less
syphon, 15mm nom.nal size brass ball valve with polythene float, C.P
brass handle unions and couplings for connections, with inlet, outlet and
overflow pipes, 40mm dia. porcelain enamelled flush bend including
cutting holes in walls and making good the same connecting the flush
bend with cistern and closet (overflow pipe to be measured and paid for
separately) (A) Vitreous China (I) In white colour 1.00 2370.39 No.
Providing and fixing washbasin with single hole for pillar tap with C.I. or
M.S. brackets painted white including sutting holes and making good the
same but excluding fittings.(A) Vitreous China:(ii) Flat Back washbasin
550 mm x v 400mm size. (i) In white colour. 2.00 1619.42 No.
Providing and fixing C.P. brass waste for washbasin or sink. (A)
32mmdia. 2.00 67.91 No.
Providing and fixing chromium plated brass half trun flush cock of
approved quality including fixing in pipe line etc. complete.(i) 20mm dia.
Providing and fixing C.P. brass shower rose with 15mm or 20mm inlet.
(A) 100mm dia. Each 1.00 282.16 No.
Providing and fixing brass screw down stop tap.(C) 25mm dia. 4.00 220.82 No.
Providing and fixing 600mm x 450mm bevelled edge mirrror of superior
glass mounted on 6mm thick A.C. sheet or plywood sheet and fixing to
wooden pluge with C.P. brass screws and washers. 3.00 859.41 No.
Providing erecting and fixing double coated ISI water tank of required
capacity each with all necessary fittings and connection etc. complete on
terrace 5000.00 3.95 Liter
Providing laying and jointing in true line and level 15mm dia. U.P.V.C.
Pipe ( SCH- 40) for cold water including fittings make PRINCE /
SUPREME / ASTRAL / FINOLEX or equivalent as approved by Engineer
In Charge. Pipe shall be fixed on the wall with the help of clamp at every
two metre C/C or shall be concelled as directed including necessary
fittings etc. including testing of pipe and joints and fixing the same with
adhesive solvent, including cost of all materials. 35.00 72.65 Rmt.
Providing laying and jointing in true line and level 25mm dia. U.P.V.C.
Pipe ( SCH- 40) for cold water including fittings make PRINCE /
SUPREME / ASTRAL / FINOLEX or equivalent as approved by Engineer
In Charge. Pipe shall be fixed on the wall with the help of clamp at every
two metre C/C or shall be concelled as directed including necessary
fittings etc. including testing of pipe and joints and fixing the same with
adhesive solvent, including cost of all materials. 45.00 91.84 Rmt.
Providing laying and jointing in true line and level 32mm dia. U.P.V.C.
Pipe ( SCH- 40) for cold water including fittings make PRINCE /
SUPREME / ASTRAL / FINOLEX or equivalent as approved by Engineer
In Charge. Pipe shall be fixed on the wall with the help of clamp at every
two metre C/C or shall be concelled as directed including necessary
fittings etc. including testing of pipe and joints and fixing the same with
adhesive solvent, including cost of all materials. 30.00 119.15 Rmt.
Providing laying and jointing in true line and level 40mm dia. U.P.V.C.
Pipe ( SCH- 40) for cold water including fittings make PRINCE /
SUPREME / ASTRAL / FINOLEX or equivalent as approved by Engineer
In Charge. Pipe shall be fixed on the wall with the help of clamp at every
two metre C/C or shall be concelled as directed including necessary
fittings etc. including testing of pipe and joints and fixing the same with
adhesive solvent, including cost of all materials. 35.00 148.12 Rmt.
Providing laying and jointing in true line and level 50mm dia. U.P.V.C.
Pipe ( SCH- 40) for cold water including fittings make PRINCE /
SUPREME / ASTRAL / FINOLEX or equivalent as approved by Engineer
In Charge. Pipe shall be fixed on the wall with the help of clamp at every
two metre C/C or shall be concelled as directed including necessary
fittings etc. including testing of pipe and joints and fixing the same with
adhesive solvent, including cost of all materials. 15.00 195.67 Rmt.
Providing, laying and jointing in true line and level 160 diametre U.P.V.C
(Type B) conforming to IS 13592-1992 with one end plain and other end
socketed with rubber ring, & fittings conforming to ISI 14735-1999 of
approved make for drainage system pipe line, pipe shall be jointed with
each other with rubber lubricant, pipe shall be fixed on wall using of PVC
clamp of the size 160 mm diametre x 210 mm length x 196 mm heigh at
every 2000 mm center to center or shall be concealed in walls as directed
including necessary fittings such as bends, shoes etc. including testing of
pipes and joints and jointed with adhesive solvent cement including cost
of all materials. 25.00 834.38 Rmt.
Providing, laying and jointing in true line and level 110 diametre U.P.V.C
(Type B) conforming to IS 13592-1992 with one end plain and other end
socketed with rubber ring, & fittings conforming to ISI 14735-1999 of
approved make for drainage system pipe line, pipe shall be jointed with
each other with rubber lubricant, pipe shall be fixed on wall using of PVC
clamp of the size 110 mm diametre x 149 mm length x 145 mm heigh at
every 2000 mm center to center or shall be concealed in walls as directed
including necessary fittings such as bends, shoes etc. including testing of
pipes and joints and jointed with adhesive solvent cement including cost
of all materials. 45.00 897.79 Rmt.
Providing and supplying, Laying in standard length ISI mark rigid
unplasticised PVC pipes suitable for potable water with ring fit joint
including cost of rings, Tess, beand, reducer etc. as per IS specification
no. 4985/1988 including all local and central taxes, transportation,freight
charges, octroi, inspection charges, loading, unloading, conveyance to
the departmental stores and including cost of jointing meterial etc.
complete. Test Pressure 6Kg/cm2
SS Sink Glosy ASIS 304 Grade x 1mm thick with over all size 610x460
mm & bowl size 560x410x200 1.00 1540.67 No.
Providing and laying polished kota stone slab 25mm thick in risers of
steps,skirting Dedo and pillars laid on 10mm thick cement mortar 1:3 (1-
Cement : 3 coarse sand) and jointed with gray cement slury mixed with
pigment to match the shade of slab including rubbing and polishing etc.
complete. 47.78 1171.40 Sqmt.
Providing and fixing single layer waterproof gypusm board 12.5 mm thick
of the make Newgood Group Co. Ltd. or equivalent & Newgood Group
Co. Ltd. company sections using waterproof board of size 1220 mm x
1830 mm x 8.0 mm suspended by G.I suapender of size 25 mm x 3 mm
with intermediate channel of size 18 mm x 40 mm x 0.80 mm at 1220 mm
center to center ceiling section of size 40 mm x 35 mm x 0.55 mm at
mm center to center and perimetre chanel A of size 20 mm x 27 mm x
mm x 0.50 mm at edges & drops including paper tap sand sofit cleat,
anchor fastener, scoch bolt connecting cleat joining compound top coat
on ceiling including making necessary opening for light fitting, diffuser etc.
complete as per detail drawing as directed. 114.72 606.95 Sqmt.
Demolition including stacking of serviceable materilas and disposal of
unserviceable materials with all lead and lift. (i) R.C.C. work 10.33 1108.12 Cumt.
Dismentaling tiled of stone floors laid in mortar including stacking of
serviceable materilas and disposal of unserviceable materials with all lead
and lift. 252.95 50.28 Sqmt.
Total Amounts Rs...……
Total Amounts Rs...……
10% Electrification Charge Rs...……
Net Amounts Rs...……
Stamp with Signature of Contractor
Consl. Engineer Engineer
"DESIGN POINT" Dhrol Nagarpalika
Chief Officer President
Dhrol Nagarpalika Dhrol Nagarpalika
DHROL NAGARPALIKA - DHROL
DIST :- JAMNAGAR
SCHEME : SJMMSVY (UDP-88) YEAR-2025-26
NAME OF WORK:- PROVIDING & FIXING WORK OF FURNITURE IN NAGARPALIKA OFFICE
LOCATION:- Kamla Nehru Park, At. Dhrol
SCHEDULE - "B-6"
PERCENTAGE RATE TENDER
Item No. & Description Quantity Rate Per Amount
Providing & fixing Work of 18mm thick waterproof plywood Shutter in kota
stone self cub board the indian teak wood frame size of 50x50mm and
fixing of kota stone self and frame fixing of screw with Araldite, openable
18mm thick Shutter in side 1mm thick white laminate and outside 1mm
thick decorative laminate protect from warping and side edges of laminate
are lipped beading with the help of automatic lapping machine. including
of S.S. Hinges, S.S. Handle, door Magnate, lock system etc. fevicol, all
labour, materials loading, unloading, transportation As per the instruction
of Architect / Consultant. 55.98 8888.00 Cumt.
High Back Revolving Chair With Arm, Upright locking, Pedestal Base
Stainless Steel, Armrest Material Aluminium, Seat material Metal,
Backrest is made of One piece injection moulded frame, Density of PU
foam used in seat KG per Cu Meter (± 3) 55, Twin wheel castor material
Nylon, Number of twin wheel castor 5 Nos., Backrest & Seat upholstered
with Leatherette, GSM/Thickness of fabric ±5%(Gram/Square meter)
gram, Overall width 610 mm, Backrest Height 200 mm, Seat Height ±10
mm 460 mm, Seat Width ±10 mm 440 mm, Seat Depth ±10 mm 410 mm
Low Back Revolving Chair With Arm, Chrome plated MS, Armrest
Material Polypropylene, Seat material Pressed and moulded with PU
foam, Backrest is made of Two pieces injection moulded frame Density of
PU foam used in seat KG per Cu Meter (± 3) 45, Height Adjustment ±
5(mm) up to 90 mm, Back type Push Back, Backrest upholstered with
100% Polyester Fabric, Seat upholstered with 100% polyester fabric,
GSM/Thickness of fabric ±5%(Gram/Square meter) 290 gram, And
Design of Gem Portal 30.00 5544.90 Cumt.
VISITOR CHAIR (OC-ORG19), MATERIAL: Type of material (other then
wood) used in Polythene cane Chair- NOT APPLICABLE, Material of
Fabric Back Cover- leatherite, Thickness of Plywood used in Backrest IN
MM (±1 mm)- N.A, Frame Material - MS,Density of Polyurethane Foam
Used in Seat ±2 (Kg/Cub M) -32 Kg/Cub.M, Material of Fabric of Seat
Cover black- leatherite, Density of Polyurethane Foam Used in Backrest
±2(Kg/Cub M)- 32 Kg/Cub.M and Design of Gem Portal
Providing & fixing of Roller Curtain Opening style 1. Roll up / Roll down
Mounting arrangement Bracket systems – to install functional roller blind
mechanism Types of roller blind Blackout roller blind Shading solution
Single roller blind – utilise one layer of fabric (called outer layer) Operating
mechanism Side winders (that lock the manually adjustable blinds at
different levels with the internal ratchet and tension adjusted by spring
inside the tube) Roller blind fitting option Outside mount (Arc fit) – that fits
over the window frame Type of bottom rail Round Supplier to perform
Installation and commissioning No
MECHANISM MATERIAL
Control unit made up of High strength reinforced plastic PVC Installation
Bracket type “ L ” brackets Installation Bracket made up of Mild steel with
white powder coated Spring made up of Rustproof High carbon steel
springs Top roller type Aluminium pipe with groove (to fix the fabric in the
groove) Head rail made up of Aluminium exclusion rail powder coated
Chain type Endless beaded chain Chain material 4.2 mm plastic bead
moulded on 2.2 mm thick polyester coat Pitch of the beads 6 mm Roller
tube made up of Anodized extruded tube of high strength alloy Inner
diameter(id) 38 mm (id) Wall thickness of roller tube 2 mm
End plug Polyester reinforced plastic Bottom rail made up of Aluminium
extruded rail with groove Cassette made up of Aluminium extruded rail
Finish of exposed portion Glossy Powder coating minimum thickness
microns Cassette/ pelmet front side shall be matching to the fabric No
Fabric material Polyester + Viscose Fabric Patterns Plain Fabric Weight
in GSM (± 10) 270 gram Light blocking percentage of outer layer (in case
of Single and dual roller blinds both) 95 percent Light blocking percentage
of inner layer (in case of dual roller blinds only) Hint : select ‘0’ in case of
Single roller blinds 0 percent Colour fastener to light (Rating range)
diretced by Engineer-in-charge. 53.70 3030.00 Sqmt.
Providing, supplying, fixing of M.S. Steel Heavy Duty Storage Racks,
Warranty 1 year
Performance Parameter, Load Per Layer (min) 100 kilogram Load Per
Layer (max) 500 kilogram
Generic, No. of Shelves (nos) 5 Material Mild Steel Packaging Type Box
Application To be used to store heavy industrial goods Features Durable
Usage Industrial Surface Finish Powder Coated Type Multi Tier Storage
Racks, Dimensions Height 1860 millimeter Length 1089 millimeter Width
512 millimeter 10.00 16665.00 No.
Providing & Fixing in position powder coated Aluminium Section Partition
with 50mm x 32mm size single/double patti top, bottom & Middle & Glass
Clip, 5mm P.V.C. rubber, 5mm thick Glass as top panel and 12 mm thick
both side prelaminated partical board as bottom panel with necessary
alluminium anodised fixtures and fastenings etc complete All types of
Materials & Labour Charges Etc. complete. 13.27 2836.08 Sqmt.
EXECUTIVE MEETING TABLE (COLLECTOR'S)
Providing and fixing Executive conference table (collector's) of Size :
width 600 mm and height 900mm with provision to joint with each other in
required pattern, made from 18mm thick waterproof plywood top covered
with 4.0 mm th. natural veneer of approved texture with basic rate @ rs.
100/sqft on top and backer 1mm thick decorative lamination in bottom
size with 0.7 mm liner grade. supported by 36mm thick plywood legs
covered with veneer of approved textureas at c/c distance og @ 1.8m or
as per detailed drawings. All surfaces are finished with two coats of
melamine polish. The modesty panel should be made out of 25 mm thick
plywood covered with 4mm veneer and melamine polish and backer
lamination in bottom side. 21.00 9595.00 Rmt.
SUPPLY, INSTALLATION, TESTING, COMMISSIONING OF 75" 4K
UHD INTERACTIVE FLAT DISPLAY PANEL WITH RESOLUTION :
3840X2160 (UHD) WITH ANTI-GLARE TECHNOLOGY, ASPECT RATIO
: 16:9, MULTI TOUCH POINT : INFRARED (IR) 20/40 TOUCH POINTS
SUPPORTS TOUCH & PEN FOR INTERACTIVE USE, PERFORMANCE
: INBUILT CPU WITH 4 CORES, OS -ANDROID 13, 8GB RAM, 64 GB
STORAGE & SLOT PROVISION FOR OPS, CONNECTIVITY :
MULTIPLE HDMI PORTS, INBUILT BLUETOOTH 5.2 & WI-FI FOR
SEEMLESS INTEGRATION, AUDIO : BUILT IN SPEAKERS (15W X 2)
HIGH QUALITY SOUND OUTPUT, DURABILITY : PANEL LIFE 50000 +
HOURS, MOUNTING : WALL MOUNT WITH ELEGANT & SPACE
SAVING DESIGN. 1.00 157055.00 No.
Total Amounts Rs...……
Total Amounts Rs...……
Stamp with Signature of Contractor
Consl. Engineer Engineer
"DESIGN POINT" Dhrol Nagarpalika
Chief Officer President
Dhrol Nagarpalika Dhrol Nagarpalika
DHROL NAGARPALIKA - DHROL
DIST :- JAMNAGAR
SCHEME : SJMMSVY (UDP-88) YEAR-2025-26
NAME OF WORK:- CONSTRUCTION WORK OF FURNACE HALL
LOCATION:- Hindu Smashan, At. Dhrol
SCHEDULE - "B-7"
PERCENTAGE RATE TENDER
Item No. & Description Quantity Rate Per Amount
Excavation for foundation upto 1.5M depth including sorting out and
stacking of useful materials and disposing of the excavated stuff up to all
lead (B) Dense or Hard Soil 29.67 161.07 Cumt.
Excavation for foundation depth from 1.5 mt. to 3.00 Mt. depth including
sorting out and stacking of useful materials and disposing of the
excavated stuff up to all lead. (C) Hard Murrum 8.00 294.05 Cumt.
Providing and laying cement concrete 1:3:6 ( 1 cement : 3 coarse sand :
Machine cut stone aggregate 40mm nominal size ) and curring complete
including cost of formwork in (a) Foundation and plinth
Filling in foundation and plinth with murrum or selected soil in layers of
cm. thickness including watering, ramming and consolidating etc.
completed. 14.11 304.60 Cumt.
Filling available excavated earth (excluding rock) in trenches. plinth,
sides of foundations etc. in layers not exceeding 20 cm. in depth
consolidating each disposited layer by ramming and watering. 22.96 137.47 Cumt.
Providing & Laying controlled cement concrete M-250 and curing
complete including the cost of formwork and Excluding the cost of
reinforcement for reinforced concrete work in (A) Foundation footing base
of column and mass concrete 5.83 4800.53 Cumt.
Providing & Laying controlled cement concrete M-250 and curing
complete including the cost of formwork and exluding the cost of
reinforcement for reinforced concrete work in Beam (C) Slabs, Landings,
Shelves, Balconies, Lintel, Beams, Girders and Cantilever upto floor two
level. G.F. 4.71 6527.63 Cumt.
Providing & Laying controlled cement concrete M-250 and curing
complete Including the cost of formwork and excluding the cost of
reinforcement for reinforced concrete work in Chhajja (C) Slabs,
Landings, Shelves, Balconies, Lintel, Beams, Girders and Cantilever upto
floor two level. G.F. 0.50 7368.96 Cumt.
Providing & Laying controlled cement concrete M-250 and curing
complete including the cost of formwork and excluding the cost of
reinforcement for reinforced concrete work in Column (D) Columns,
Pillars posts and struts upto floor two level G.F. 3.90 8134.54 Cumt.
Providing & Laying controlled cement concrete M-250 and curing
complete Including the cost of formwork and excluding the cost of
reinforcement for reinforced concrete work in Slab (C) Slabs, Landings,
Shelves, Balconies, Lintel, Beams, Girders and Cantilever upto floor two
level. G.F. 3.34 7497.23 Cumt.
Providing and laying 1:3:6 (cement :3 Course sand :6 crushed stone
aggregate 20 nominal size) and curing complete including cost of form
work in (A) Wall caps/copping 0.39 4149.51 Cumt.
Providing TMT Bar FE 500D reinforcement for R.C.C. work including
bending, binding and placing in position complete upto floor two level G.F.
White Stone Bela mesonry block in course in superstructure with stone of
approved quality in Cement Mortar 1:5 (1-Cement :5- course sand)
including packing the joints etc. complete. 19.46 6609.27 Cumt.
Providing 15 mm thick cement plaster in single coat on fair side
brick/concrete wall for interior plastering up to floor two level finished even
and smooth in with Floating coat of neat cement. (i) cement Mortar 1:3 (1
cement : 3 Sand) 133.07 236.51 Sqmt.
Providing 10mm thick cement plaster in single coat on brick/concrete
walls for interior plastering upto floor two level and finished even and
smooth in (i) Cement mortar 1:3 (1-cement:3-sand) Extra over items 58 to
64 for finishing with a floating coat of neat cement slurry. 33.24 190.34 Sqmt.
20 MM thick sand faced cement plaster on walls upto height 10meters
above ground level consisting of 12 MM thick backing coat of Cement
Mortar 1:3 (1-Cement : 3-Sand) and 8MM thick finishing coat of Cement
Mortar 1:1 (1-Cement : 1-Sand) etc. complete. 153.61 323.21 Sqmt.
Providing and laying polished Kota stone slab flooring over 20mm
(Average) thick base of cement mortar 1:6 (1-cement : 6-coarse sand) or
L.M. 1.1.5 (1-Lime putty :1.5 - coarse sand) laid over and jointed with grey
cement slurry mixed with pigment to match the shade of slab including
rubbing and polishing etc. complete. (A) 25mm thick 31.07 1019.39 Sqmt.
Providing and laying Black Granite stone slab flooring over 20mm
(average)base of cement mortar 1:6 (1-cement : 6 coarse sand) or L.M.
1:1.5(1- lime putty : 1.5 - coarse sand) laid and jointed with gray cement
slurry including rubbing and polishing complete. (A) Granite slab 18mm
thick 9.72 3007.78 Sqmt.
Labour Charge Full Round Edge for Granite. 21.60 51.51 Rmt.
Providing throating of plaster drip and moulding to R.C.C. Chhajja. 17.20 44.07 Rmt.
Providing and laying coloured glazed tiles of the size 300 mm x 200 mm x
8 mm / 300 mm x 450 mm x 8 mm in skirting, risers of steps and dedo on
10 mm. thick cement plaster 1:3 (1 cement : 3 coarse sand) & jointed with
white cement slurry. 35.20 1523.67 Sqmt.
Providing and laying broken China Mosaic Flooring for Terrace using
12mm to 20mm broken pieces of glazed tiles to be laid over cement
mortar 1:3 to plain or slope and to be tempered to bring mortar crème out
upto surface using white cement including rounding off junctions and
extending them up to 15cm. along the wall, clearing with water and oxalic
acid etc. as directed. 20.80 779.70 Sqmt.
Providing and mixing Dr. Fixit water proofing material in cement concrete
in mix proportion recommended b the manufacturers. 3.74 49.16 Lit/Kg.
Providing and laying cement concrete flooring 1:2:4 (1 cement :2 course
sand : 4 graded stone aggregate 20mm nominal size) laid in one layer
finished with a floating coat of neat cement (B) 50mm thick 20.80 347.15 Sqmt.
Providing and fixing window having extruded aluminum Colour anodized
section frame main outer size 95mm x 24mm x 1.17mm (of Jindal
Section no:2459 @ wt.of 0.738 Kg/mt), horizontal Three track member
size 92mm x 31.75mm x 1.30mm (of Jindal Section no:8688,@ Wt.1.07
Kg/mt), vertical member of size 92mm x 31.75mm x 1.50mm (of Jindal
Section no:8933,@ Wt. 1.06 Kg/mt) with sliding shutters of horizontal
member size 40 mmx18mm x1.29mm (of Jindal Section no:8947@ wt.of
0.456 Kg/mt), vertical member of size 40mm x 18mm x 1.29 mm (of
Jindal Section no:8949 @ wt.of 0.456Kg/mt/ with 5 mm thick transparent
bronze colour tinted float glass with powder coated aluminum fittings and
fixtures and transparent silicon sealant glass fixing to frame as per details
etc. 7.20 1583.95 Sqmt.
Providing and fixing M.S. grills of required pattern to wooden frames of
windows etc. with M.S. flats at required spacings and frame alround,
square or round bars with round headed bolts and nuts or by screws (A)
Plain Grill. 732.24 111.68 Kg.
Applying priming coat over new steel and other metel surface after and
including preparing the surface by throughly cleaning, oil,grease, dirt and
other foreign matter and scoured with brushes fine steel wood, scrapers
and sand paper with ready mixed priming paint brushing red lead.
Painting two coats (excluding priming coat) on new steel and other metal
surface with enamel paint, brushing, interior to give an even shade
including cleaning the surface an even shade including cleanicn the
surface of all dirt, dust and other foreign matter. 18.31 94.39 Sqmt.
Wall painting (two coats) with plastic emulsion paint of approved brand
and manufacture on undecorated wall surface to give an even shade
including Primer throughly brushing the surface free from mortar
droppings and other foreign matter and sand papered smooth. 166.31 86.38 Sqmt.
Finishing wall with weather proof exterior emulsion paint on wall surface
including primer coat (two coats) to give an required shape even shade
after thoroughly brushing the surface to remove all dirt, and remains of
loose powdered materials.etc complete. 153.61 122.14 Sqmt.
Provding P.V.C. 100 mm diameter water spouts including necessary iron
gratings as per drawings. 5.00 159.37 No.
Steel work, welded in built up sections framed work including cutting,
hoisting, fixing in position and applying a priming coat of read lead paint.
(A)In beams and joists, channels angles Tees, flats, with connecting
plates or angle cleats as in main and cross beams. Hip and jack rafters,
purlins conneted to common rafters and the like. 3.73 9108.48 Qtl.
Providing corrugated G.I. sheet of class-3 roofing fixed with glavanished
iron J or L Hooks, Bolts and nuts 8mm diameter with bitumen and G.I.
limpet washer or G.I. limpet washer. filled with white lead complete
excluding the cost of purlins, Rafters and Trusses. (1) 0.80 mm thick
sheet. 10.66 734.19 Sqmt.
Providing, laying Providing, laying and jointing in true line and level
diametre U.P.V.C (Type B) conforming to IS 13592-1992 with one end
plain and other end socketed with rubber ring, & fittings conforming to ISI
14735-1999 of approved make for drainage system pipe line, pipe shall
be jointed with each other with rubber lubricant, pipe shall be fixed on wall
using of PVC clamp of the size 110 mm diametre x 149 mm length x
mm heigh at every 2000 mm center to center or shall be concealed in
walls as directed including necessary fittings such as bends, shoes etc.
including testing of pipes and joints and jointed with adhesive solvent
cement including cost of all materials. 26.00 897.79 Rmt.
Total Amounts Rs...……
Total Amounts Rs...……
3% Electrification Charge Rs...……
Net Amounts Rs...……
Stamp with Signature of Contractor
Consl. Engineer Engineer
"DESIGN POINT" Dhrol Nagarpalika
Chief Officer President
Dhrol Nagarpalika Dhrol Nagarpalika
DHROL NAGARPALIKA - DHROL
DIST :- JAMNAGAR
SCHEME : SJMMSVY (UDP-88) YEAR-2025-26
NAME OF WORK:- RENOVATION WORK OF SMASHAN SHED
LOCATION:- Hindu Smashan, At. Dhrol
SCHEDULE - "B-8"
PERCENTAGE RATE TENDER
Item No. & Description Quantity Rate Per Amount
Excavation for foundation upto 1.5M depth including sorting out and
stacking of useful materials and disposing of the excavated stuff up to all
Lead (B) Dense or Hard Soil 25.22 161.07 Cumt.
Providing and laying cement concrete 1:3:6 ( 1 cement : 3 coarse sand :
Machine cut stone aggregate 40mm nominal size ) and curring complete
including cost of formwork in (a) Foundation and plinth 16.02 3268.36 Cumt.
Providing and laying cement concrete 1:2:4 (1- Cement : 2- Coarse sand :
4- graded stone aggregates 20 mm nominal size) and curing complete
including cost of formwork in (A) Foundation and Plinth 0.31 3803.06 Cumt.
Providing TMT Bar FE 500D reinforcement for R.C.C. work including
bending, binding and placing in position complete upto floor two level G.F. 23.51 77.29 Kg.
White Stone Bela mesonry block in course in superstructure with stone of
approved quality in Cement Mortar 1:5 (1-Cement :5- course sand)
including packing the joints etc. complete. 3.71 6609.27 Cumt.
Providing 15 mm thick cement plaster in single coat on fair side
brick/concrete wall for interior plastering up to floor two level finished even
and smooth in with Floating coat of neat cement. (i) cement Mortar 1:3 (1
cement : 3 Sand) 122.57 236.51 Sqmt.
Providing 10mm thick cement plaster in single coat on brick/concrete
walls for interior plastering upto floor two level and finished even and
smooth in (i) Cement mortar 1:3 (1-cement:3-sand) Extra over items 58 to
64 for finishing with a floating coat of neat cement slurry.+ 102.19 190.34 Sqmt.
20 MM thick sand faced cement plaster on walls upto height 10meters
above ground level consisting of 12 MM thick backing coat of Cement
Mortar 1:3 (1-Cement : 3-Sand) and 8MM thick finishing coat of Cement
Mortar 1:1 (1-Cement : 1-Sand) etc. complete. 278.12 323.21 Sqmt.
Providing and laying polished Kota stone slab flooring over 20mm
(Average) thick base of cement mortar 1:6 (1-cement : 6-coarse sand) or
L.M. 1.1.5 (1-Lime putty :1.5 - coarse sand) laid over and jointed with grey
cement slurry mixed with pigment to match the shade of slab including
rubbing and polishing etc. complete. (A) 25mm thick 143.02 1019.39 Sqmt.
Providing and laying Black Granite stone slab flooring over 20mm
(average)base of cement mortar 1:6 (1-cement : 6 coarse sand) or L.M.
1:1.5(1- lime putty : 1.5 - coarse sand) laid and jointed with gray cement
slurry including rubbing and polishing complete. (A) Granite slab 18mm
thick 8.39 3007.78 Sqmt.
Labour Charge Full Round Edge for Granite 10.30 51.51 Rmt.
Providing and laying broken China Mosaic Flooring for Terrace using
12mm to 20mm broken pieces of glazed tiles to be laid over cement
mortar 1:3 to plain or slope and to be tempered to bring mortar crème out
upto surface using white cement including rounding off junctions and
extending them up to 15cm. along the wall, clearing with water and oxalic
acid etc. as directed. 122.40 779.70 Sqmt.
Providing and mixing Dr. Fixit water proofing material in cement concrete
in mix proportion recommended b the manufacturers. 22.03 49.16 Lit/Kg.
Providing and laying cement concrete flooring 1:2:4 (1 cement :2 course
sand : 4 graded stone aggregate 20mm nominal size) laid in one layer
finished with a floating coat of neat cement (B) 50mm thick 122.40 347.15 Sqmt.
Providing and fixing M.S. grills of required pattern to wooden frames of
windows etc. with M.S. flats at required spacings and frame alround,
square or round bars with round headed bolts and nuts or by screws (A)
Plain Grill. 843.75 111.68 Kg.
Applying priming coat over new steel and other metel surface after and
including preparing the surface by throughly cleaning, oil,grease, dirt and
other foreign matter and scoured with brushes fine steel wood, scrapers
and sand paper with ready mixed priming paint brushing red lead.
Painting two coats (excluding priming coat) on new steel and other metal
surface with enamel paint, brushing, interior to give an even shade
including cleaning the surface an even shade including cleanicn the
surface of all dirt, dust and other foreign matter. 16.88 94.39 Sqmt.
Wall painting (two coats) with plastic emulsion paint of approved brand
and manufacture on undecorated wall surface to give an even shade
including Primer throughly brushing the surface free from mortar
droppings and other foreign matter and sand papered smooth. 102.19 86.38 Sqmt.
Finishing wall with weather proof exterior emulsion paint on wall surface
including primer coat (two coats) to give an required shape even shade
after thoroughly brushing the surface to remove all dirt, and remains of
loose powdered materials.etc complete. 278.12 122.14 Sqmt.
Provding P.V.C. 100 mm diameter water spouts including necessary iron
gratings as per drawings. 7.00 159.37 No.
Providing, laying Providing, laying and jointing in true line and level
diametre U.P.V.C (Type B) conforming to IS 13592-1992 with one end
plain and other end socketed with rubber ring, & fittings conforming to ISI
14735-1999 of approved make for drainage system pipe line, pipe shall
be jointed with each other with rubber lubricant, pipe shall be fixed on wall
using of PVC clamp of the size 110 mm diametre x 149 mm length x
mm heigh at every 2000 mm center to center or shall be concealed in
walls as directed including necessary fittings such as bends, shoes etc.
including testing of pipes and joints and jointed with adhesive solvent
cement including cost of all materials. 35.00 897.79 Rmt.
Total Amounts Rs...……
Total Amounts Rs...……
3% Electrification Charge Rs...……
Net Amounts Rs...……
Stamp with Signature of Contractor
Consl. Engineer Engineer
"DESIGN POINT" Dhrol Nagarpalika
Chief Officer President
Dhrol Nagarpalika Dhrol Nagarpalika
DHROL NAGARPALIKA - DHROL
DIST :- JAMNAGAR
SCHEME : SJMMSVY (UDP-88) YEAR-2025-26
NAME OF WORK:- PROVIDING & FIXING OF GAS FIRED HUMAN BODY CREMATION FURNACE
LOCATION:- Hindu Smashan, At. Dhrol
SCHEDULE - "B-9"
PERCENTAGE RATE TENDER
Item No. & Description Quantity Rate Per Amount
Technical Parameter
Temperature Control Automatic
Refractory Thickness 300 millimeter
Ash Removal Manual
Crematory Stack 30 Meter Height
Temperature range of Secondary chamber
Combustion Fan Type Centrifugal
Material Of Construction High Grade Mild Steel
Cremation Time Per Body 5-240
Cremation Chamber Primary, Secondary
Material Loading Capacity 300 kilogram
Average Cooling Time 60 minute
Stack Diameter 200 millimeter
Cremation Range, (kg/hr)
Machine Noise Less Than 65 Decibels
Power Supply 110-240V;50-60hz
Temperature range of primary chamber
Ignition Automatic
Feeding System Manual
Cremation Ash Out Time 45 minute
Chamber Dimension
Width 1000 millimeter
Length 2400 millimeter
Height 1000 millimeter
Warranty 3 years
Packaging Type Carton Box
Additional Parameter
Control Panel Type Digital
Specifications(GOLDEN)
Temperature Control Automatic
Temperature range of Secondary
Material Of Construction High Grade Mild Steel
Cremation Time Per Body 5-240
Cremation Chamber Primary, Secondary
Material Loading Capacity 300 kilogram
Temperature range of primary
Ignition Automatic 1.00 9064750.00 No.
Warranty 3 years
(Note : Rate Including of GST, Not Paid Extra GST at the time of Billing) Total Amounts Rs...……
(Note : Rate Including of GST, Not Paid Extra GST at the time of Billing) Total Amounts Rs...……
Stamp with Signature of Contractor
Consl. Engineer Engineer
"DESIGN POINT" Dhrol Nagarpalika
Chief Officer President
Dhrol Nagarpalika Dhrol Nagarpalika
DHROL NAGARPALIKA - DHROL
DIST :- JAMNAGAR
SCHEME : SJMMSVY (UDP-88) YEAR-2025-26
NAME OF WORK:- CONSTRUCTION WORK OF TOILET BLOCK
LOCATION:- GANDHI CHOWK, GRAIN MARKET, At. Dhrol
SCHEDULE - "B-10"
PERCENTAGE RATE TENDER
Item No. & Description Quantity Rate Per Amount
Excavation for foundation upto 1.5 m depth including sorting out and
stacking of useful materials and disposing off the excavated stuff
upto all lead. (B) Dense or Hard soil 11.15 161.07 Cumt.
Providing and laying cement concrete 1:3:6 ( 1 cement : 3 coarse sand :
Machine cut stone aggregate 40mm nominal size ) and curring complete
including cost of formwork in (a) Foundation and plinth
Providing & Laying controlled cement concrete M-200 and curing
complete including the cost of formwork and excluding the cost of
reinforcement for reinforced concrete work in Beam(C) Slabs, Landings,
Shelves, Balconies, Lintel, Beams, Girders and Cantilever upto floor two
level. 1.52 6462.99 Cumt.
Providing & Laying controlled cement concrete M-200 and curing
complete Including the cost of formwork and excluding the cost of
reinforcement for reinforced concrete work in Lintel (C) Slabs, Landings,
Shelves, Balconies, Lintel, Beams, Girders and Cantilever upto floor two
level. 0.65 6454.91 Cumt.
Providing & Laying controlled cement concrete M-200 and curing
complete Including the cost of formwork and excluding the cost of
reinforcement for reinforced concrete work in Chhajja (C) Slabs,
Landings, Shelves, Balconies, Lintel, Beams, Girders and Cantilever upto
floor two level. 0.21 7064.95 Cumt.
Providing & Laying controlled cement concrete M-200 and curing
complete Including the cost of formwork and excluding the cost of
reinforcement for reinforced concrete work in Slab (C) Slabs, Landings,
Shelves, Balconies, Lintel, Beams, Girders and Cantilever upto floor two
level. 1.58 7606.31 Cumt.
Providing and laying cement concrete 1:3:6 (1 cement, :3 coarse sand, :
6 crushed stone aggregate 20 mm norminal size) and curring complete
including cost of form work in (A) Wall caps/coping 1.02 4149.51 Cumt.
Providing TMT Bar FE 500D reinforcement for R.C.C. work including
bending, binding and placing in position complete upto floor two level 629.00 77.29 Kg.
White Stone Bela mesonry block in course in superstructure with stone of
approved quality in Lime Mortar 1:5 (1-Cement :5- course sand) including
packing the joints etc. complete. 3.26 6250.97 Cumt.
White Stone Bela mesonry block in course in superstructure with stone of
approved quality in Lime Mortar 1:5 (1-Cement :5- course sand) including
packing the joints etc. complete. 9.88 6609.27 Cumt.
(i) Half brick masonry in common brunt clay building bricks having
crushing strength not less than 35 Kg/Sq.Cm. in Cement mortar 1:4 (1-
Cement : 4 -coarse sand) in foundation and plinth (B) Conventional 15.96 683.86 Sqmt.
Filling in foundation and plinth with murrum or selected soil in layers of
cm. thickness including watering, ramming and consolidating etc.
completed. 2.66 304.60 Cumt.
Providing 15 mm thick cement plaster in single coat on fair side
brick/concrete wall for interior plastering up to floor two level finished even
and smooth in with Floating coat of neat cement. (i) cement Mortar 1:3 (1
cement : 3 Sand) 84.95 236.51 Sqmt.
20 MM thick sand faced cement plaster on walls upto height 10meters
above ground level consisting of 12 MM thick backing coat of Cement
Mortar 1:3 (1-Cement : 3-Sand) and 8MM thick finishing coat of Cement
Mortar 1:1 (1-Cement : 1-Sand) etc. complete. 68.10 323.21 Sqmt.
Providing and laying polished kota stone slab flooring over 20 mm
(average) thick base of cement mortar 1:6 ( 1 cement : 6 course sand) or
L.M. 1:1.5 laid over and jointed with grey cement slurry including rubbing
and polishing etc. complete rubbing and polishing etc. complete (A)
mm thick 3.51 1019.39 Sqmt.
Providing and laying white glazed tiles 6 mm. Thick in flooring treads of
steps and landings laid on a Bed of 12 mm. Thick cement mortar 1:3 (1
cement : 3 coarse sand) pointing in white cleaned jointed with white
cement slurry 8.98 964.48 Sqmt.
Providing and laying white glazed tiles 6mm thick skrting risers of steps
and dedo on 10mm thick cement plaster 1:3 (1-Cement : 3-Coarse sand)
& jointed with white cement slurry. 22.86 1127.48 Sqmt.
Providing and fixing standared extruded of alluminium section of size
63mm x 38.10mm x 1.2mm (Jindal Section :2434, @ Wt. 0.643 Kg/mt)
with colour anodized alluminium frame for ventilation with 5 mm thick
frosted glass as details etc complete for Ventilation 1.62 1175.56 Sqmt.
Providing and fixing M.S. grills of required pattern to wooden frames of
windows etc. with M.S. flats at required spacings and frame alround,
square or round bars with round headed bolts and nuts or by screws (A)
Plain Grill. 191.70 111.68 Kg.
Applying priming coat of over new steel and other metal surface after and
including preparing the surface by thoroughly cleaning, oil grease, dirt and
other foreign mater and scoured with brushes fine steel wool, scrapers
and sand paper with ready mixed priming paint brushing red le
Painting two coats (excluding priming coat) on new steel and other metal
surface with enamel paint, brusing interior to give an even shade
including cleaning the surface an even shade including cleaning the
surface of all dirt, dust and other foreign matter. 3.83 94.39 Sqmt.
Providing and fixing FRP frame size 100x50 mm and 28mm thick FRP
depress panel shutter having extra reinforcement on sides & edges in Gel
coat finish. The core of the shutter & frame is to be filed up with injected
fire retardant grade polyurethene foam done in situ alongwith embedded
wooden pieces for stiffening & also taking hinges & fintures. The whole
FRP frame & shutter is to be water proof weather proof, termite proof &
resistance to mild acid/alkali. Rates are to be inclusive of S.S hinges with
necessary screws & alluminium fixtures & fastenings & fastener sleeve.
Wall painting (two coats) with plastic emulsion paint of approved brand
and manufacture on undecorated wall surface to give an even shade
including throughly brushing the surface free from mortar droppings and
other foreign matter and sand papered smooth. 84.95 86.38 Sqmt.
Finishing wall with weather proof exterior emulsion paint on wall surface
(two coats) to give an required shape even shade after thoroughly
brushing the surface to remove all dirt, and remains of loose powdered
materials.etc complete. 68.10 122.14 Sqmt.
Providing and fixing PVC SWR Nahni trap IS 14735 for drain - 100 mm
diameter with jali of the following nominal diameter of self cleansing
design with C.I scread down or hinged grating including the cost of cutting
and making good the walls. 6.00 600.23 No.
Providing and fixing S.W. gully trap with C.I. grating brick masonry
chamber and water tight C.I. cover with frame of 300mm x 300mm size
(inside) with standard weight.(i) Square mouth traps. (A) 100mm x
100mm size P type. 4.00 1292.19 No.
Providing and fixing screw down bib taps of following size. (A) Brass
screw down bib tap polished bright. (i) 15mm dia. 6.00 186.83 No.
Providing and fixing Gun metal check or non-return fullway wheel
valve.(D) 32mm dia. 2.00 314.73 No.
Providing and fixing Gun metal check or non-return fullway wheel
valve.(E) 40mm dia. 2.00 663.43 No.
Providing and fixing water closet squatting Pan (Indian type W.C. Pan)
size 580mm (Earthwork, bed concrete, foot reste and trap to be
measured and paid for separately) (A) Vitreous China.(I) Long pattern =
White colour 4.00 1010.65 No.
Providing and fixing 100mm size P or S trap for water closet squatting
pan including jointing the trap with the pan and soil pipe in cement Mortar
1:1 (1-Cement : 1-Fine sand)(A) Vitreous China. 4.00 340.31 No.
Providing erecting and fixing double coated Syntex PVC. (ISI) water tank
of required capacity each with all necessary fittings and connection etc.
complete on terrace. 1000.00 3.95 Litr.
Providing and fixing wash basin with single hole for pillar tap with C.I. or
M.S. brackets painted white including cutting holes and making good the
same but excluding fittings :) (A) Vitreous china (ii) Flat back wash basin
550mm x 400mm size (I) in white colour 2.00 1619.42 Nos.
Providing and fixing C.P. Brass waste for washbasin or sink [A] 32mm dia
Providing and fixing Urinal or approved quality including conecting the
Urinal with trap and with integral longitudinal flush pipe. (A) Squating plate
pattern white earthware 550mm x 300mm 3.00 1667.31 Nos.
Providing and fixing brass screw down stop tap. 3.00 220.82 Nos.
Providing, laying aProviding, laying and jointing in true line and level
diametre U.P.V.C (Type B) conforming to IS 13592-1992 with one end
plain and other end socketed with rubber ring, & fittings conforming to ISI
14735-1999 of approved make for drainage system pipe line, pipe shall
be jointed with each other with rubber lubricant, pipe shall be fixed on wall
using of PVC clamp of the size 110 mm diametre x 149 mm length x
mm heigh at every 2000 mm center to center or shall be concealed in
walls as directed including necessary fittings such as bends, shoes etc.
including testing of pipes and joints and jointed with adhesive solvent
cement including cost of all materials. 15.00 897.79 Rmt.
Providing, laying and jointing in true line and level 160 diametre U.P.V.C
(Type B) conforming to IS 13592-1992 with one end plain and other end
socketed with rubber ring, & fittings conforming to ISI 14735-1999 of
approved make for drainage system pipe line, pipe shall be jointed with
each other with rubber lubricant, pipe shall be fixed on wall using of PVC
clamp of the size 160 mm diametre x 210 mm length x 196 mm heigh at
every 2000 mm center to center or shall be concealed in walls as directed
including necessary fittings such as bends, shoes etc. including testing of
pipes and joints and jointed with adhesive solvent cement including cost
of all materials. 15.00 834.38 Rmt.
Providing laying and jointing in true line and level 15mm dia. U.P.V.C.
Pipe ( SCH- 40) for cold water including fittings as approved by Engineer
In Charge. Pipe shall be fixed on the wall with the help of clamp at every
two metre C/C or shall be concealed as directed including necessary
fittings etc. including testing of pipe and joints and fixing the same with
adhesive solvent, including cost of all materials. 15.00 72.65 Rmt.
Providing laying and jointing in true line and level 25mm dia. U.P.V.C.
Pipe ( SCH- 40) for cold water including fittings as approved by Engineer
In Charge. Pipe shall be fixed on the wall with the help of clamp at every
two metre C/C or shall be concealed as directed including necessary
fittings etc. including testing of pipe and joints and fixing the same with
adhesive solvent, including cost of all materials. 15.00 91.84 Rmt.
Providing laying and jointing in true line and level 32mm dia. U.P.V.C.
Pipe ( SCH- 40) for cold water including fittings as approved by Engineer
In Charge. Pipe shall be fixed on the wall with the help of clamp at every
two metre C/C or shall be concealed as directed including necessary
fittings etc. including testing of pipe and joints and fixing the same with
adhesive solvent, including cost of all materials. 15.00 119.15 Rmt.
Providing laying and jointing in true line and level 40mm dia. U.P.V.C.
Pipe ( SCH- 40) for cold water including fittings as approved by Engineer
In Charge. Pipe shall be fixed on the wall with the help of clamp at every
two metre C/C or shall be concealed as directed including necessary
fittings etc. including testing of pipe and joints and fixing the same with
adhesive solvent, including cost of all materials. 12.00 148.12 Rmt.
(B) Providing sock pit of 5.00 Cu.M. Volume including excavating and
filling brickbats with dry masonry work at top for 45cm. height including
covering the top with stone including providing vatas in C.M. 1:3 with
finishing curing etc. complete as directed. 1.00 3222.29 No.
Providing and laying broken China Mosaic Flooring for Terrace using
12mm to 20mm broken pieces of glazed tiles to be laid over cement
mortar 1:3 to plain or slope and to be tempered to bring mortar crème out
upto surface using white cement including rounding off junctions and
extending them up to 15cm. along the wall, clearing with water and oxalic
acid etc. as directed. 9.29 779.70 Sqmt.
Providing and mixing Dr. Fixit water proofing material in cement concrete
in mix proportion recommended b the manufacturers. 1.67 49.16 Lit/Kg.
Providing and laying cement concrete flooring 1:2:4 (1 cement :2 course
sand : 4 graded stone aggregate 20mm nominal size) laid in one layer
finished with a floating coat of neat cement (B) 50mm thick 9.29 347.15 Sqmt.
Total Amounts Rs...……
Total Amounts Rs...……
3% Electrification Charge Rs...……
Net Amounts Rs...……
Stamp with Signature of Contractor
Consl. Engineer Engineer
"DESIGN POINT" Dhrol Nagarpalika
Chief Officer President
Dhrol Nagarpalika Dhrol Nagarpalika
DHROL NAGARPALIKA - DHROL
DIST :- JAMNAGAR
SCHEME : SJMMSVY (UDP-88) YEAR-2025-26
NAME OF WORK:- CONSTRUCTION WORK OF PIPE CULVERT
LOCATION:- Near Bharwadni Jok, Latipar Road, At. Dhrol
SCHEDULE - "B-11"
PERCENTAGE RATE TENDER
Item No. & Description Quantity Rate Per Amount
Excavation for foundation in sand, gravel clay, soft soil ans murrum etc.
including shorting, strutting and dewatering as necessary ans disposing of
the excavated stuff as directed (A) Depth upto 3.0m. And Lead Up To
Providing and filling in foundation with ordinary Cement concrete M-100
mix and providing necessary vertical pin headers including formwork,
vibrating, ramming and curing complete. 49.50 3362.25 Cumt.
Providing & Laying controlled cement concrete M-200 for R.C.C Return
as per drawing including necessary shutering laying,vibrating,height from
0.00 to 5.00 m (a) Pier (b) Abutment (c) R.C.C Return. 105.90 5217.59 Cumt.
Filling in Foundation and plinth with murrum or selected soil in layers of
20cm thickness including watering,ramming, and consolidation etc.
complete. 178.10 304.60 Cumt.
Supplying and fixing reinforced concrete heavy duty non-pressure pipes
with collars for culverts carrying heavy traffic as per IS 458-1991
specifications including setting the pipes in C.M. 1:2 watering and laying
(to level or slopes) of class NP3 of following internal daimeters.(vii)
Supplying of crushed stone aggregate Chipping ect.of hard stone of
following niminal size free of disintegrated pieces deleterious and orianic
mater ( for Bitumen surface dressing etc.) and grading as per I.R.C. code
(ii) 40 mm to 63mm size 21.00 568.63 Cumt.
(i) Supplying of Stone Dust materials 5.30 265.63 Cumt.
Spredding the stone aggregate for soiling and W.B.M. including filling the
interstice forming the surface to required camber and gradient (i) 40mm
size aggregate 21.00 268.49 Cumt.
Spreding blindage or road crust filling the gaps in metal and levelling to
gradient and camber as directed (i) Murram 5.30 158.53 Cumt.
Rolling and consolidating water bound macadam (except leterite and
kankar) including watering not exceeding 150mm thickness (main layer
including filling in depression which occurs during the process (B) With
power roller exceeding 8 tonnes and not exceeding 12 tonnes 210.00 21.20 Sqmt.
Providing and casting in situ ordinary cement concrete M-200 for average
75 mm thick wearing coat laid as directed including tamping ,vibrating,
finishing, curing and filling in joints with bitumen complete. 21.00 4355.93 Cumt.
Providing and laying in position FE 500D TMT bar reinforcement including
cutting, bending, hooking and tying complete as per detailed drawings for
the following. (A) Piers (B) Abutments (C) R.C.C. Returns 1.55 73858.69 MT
Providing and fixing in position FE 500D TMT bar reinforement including
cutting, bending and tying complete as per detailed drawings. (A) R.C.C.
Kerb. (B) R.C.C. Footpath. (C) R.C.C Approch slab. (D) Wearing Coat. 1.16 73243.02 MT
Providing and fixing guard stone as per I.R.C. type design including white
washing etc. complete. (ii) Fixing in CC 1:5:10 60.00 350.80 No.
Providing and laying weep holes in abutment and return by using A.C.
pipes of 100mm diameter including laying in proper grade and jointing
etc. complete as per detailed drawings. 61.00 88.76 No.
Total Amounts Rs...……
Total Amounts Rs...……
Stamp with Signature of Contractor
Consl. Engineer Engineer
"DESIGN POINT" Dhrol Nagarpalika
Chief Officer President
Dhrol Nagarpalika Dhrol Nagarpalika
DHROL NAGARPALIKA - DHROL
DIST :- JAMNAGAR
SCHEME : SJMMSVY (UDP-88) YEAR-2025-26
NAME OF WORK:- PROVIDING SUPPLYING LOWERING LAYING, JOINTING 200mm PVC PIPE LINE
LOCATION:- Radhe Residency Society, Jamnagar Rajkot Highway to Radhe Krishna Temple, At. Dhrol
SCHEDULE - "B-12"
PERCENTAGE RATE TENDER
Item No. & Description Quantity Rate Per Amount
Providing and supplying in standard length ISI mark rigid unplasticised PVC
pipes suitable for potable water with ring fit joint including cost of rings, as per IS
specification no. 4985/1988 including all local and central taxes, transportation,
freight charges, octroi, inspection charges, loading, unloading, conveyance to the
departmental stores and including cost of jointing material etc. complete. One
coupler / ring shall be provided with each full length pipe cost of which is included
in rates below. Test Pressure 6 Kg/cm2. (200mm Dia) 650.00 911.00 Rmt.
Providing and supplying at store or site of work inclu. Freight, loading, unloading,
2 % as per Item No.
stacking insurance & all taxes etc. such Tee, Bend, Reduser, etc.
Excavation for pipe line trenches for water supply, sewerage line, manhole etc.
all with shoring and struting if required as per required gradient and line including
safety provisions using site rails and stacking excavated stuff including up to all
required lead cleaning the site etc. complete for all lifts and strata as specified.
(a) In all sort of soils and soft murrum 280.80 102.35 Cumt.
(b) In hard murrum, boulders, incl. Macadam road. 187.20 155.25 Cumt.
Lowering, laying and jointing PVC pipes and specials of following class and
diameter including cost of conveyance from stores to site of works including cost
of labour, material, except cement solvent, giving satisfactory hydraulic testing as
per ISI code. (200mm Dia) 650.00 42.55 Rmt.
Refilling the pipeline trenches incl. ramming, watering, consolidating desposal of
surplus stuff as directed within a radius of 3 km. 447.59 25.30 Cumt.
Making job connection for old pipes in connecting the pipe line with existing main
and inserted of special incl. Cost of excavation cutting of pipes, dewatering
testing refitting etc. complete incl. all jointing materials etc. comp. (excl. cost of
specials, pipes and fittings) 1.00 622.00 Nos.
Providing and supplying ISI mark CI D/F Sluice Valves as per IS:14846 (Latest
Edition) of following class and diameter including all taxes, insurance,
transportation, freight charges, octroi, inspection charges, loading, unloading,
conveyance to departmental stores, stacking etc. complete. PN-1 With
hand/wheel cap operated (Alt-1 Type long body) (200mm Dia) 1.00 10902.00 No.
Lowering, laying and jointing in position following C. I. / D/F Reflux valves,
Butterfly valves, Sluice valves and Air valves including cost of all labour, jointing
material, including nut bolts and giving satisfactory hydraulic testing, etc.
complete. (A) Sluice valves, Butterfly Valves, Reflux Valves (200mm Dia) 1.00 853.30 No.
Total Amounts Rs...……
Total Amounts Rs...……
Stamp with Signature of Contractor
Consl. Engineer Engineer
"DESIGN POINT" Dhrol Nagarpalika
Chief Officer President
Dhrol Nagarpalika Dhrol Nagarpalika
DHROL NAGARPALIKA - DHROL
DIST :- JAMNAGAR
SCHEME : SJMMSVY (UDP-88) YEAR-2025-26
NAME OF WORK:- PROVIDING SUPPLYING LOWERING LAYING, JOINTING 160mm & 110MM PVC PIPE LINE
LOCATION:- Jyoti Park, Umiya Park & Madhav Park, At. Dhrol
SCHEDULE - "B-13"
PERCENTAGE RATE TENDER
Item No. & Description Quantity Rate Per Amount
Providing and supplying in standard length ISI mark rigid unplasticised
PVC pipes suitable for potable water with ring fit joint including cost of
rings, as per IS specification no. 4985/1988 including all local and central
taxes, transportation, freight charges, octroi, inspection charges, loading,
unloading, conveyance to the departmental stores and including cost of
jointing material etc. complete. One coupler / ring shall be provided with
each full length pipe cost of which is included in rates below. Test
Pressure 6 Kg/cm2.
Providing and supplying at store or site of work inclu. Freight, loading,
unloading, stacking insurance & all taxes etc. such Tee, Bend, Reduser, 2 % as per Item No.
Excavation for pipe line trenches for water supply, sewerage line,
manhole etc. all with shoring and struting if required as per required
gradient and line including safety provisions using site rails and stacking
excavated stuff including up to all required lead cleaning the site etc.
complete for all lifts and strata as specified.
(a) In all sort of soils and soft murrum 279.10 102.35 Cumt.
(b) In hard murrum, boulders, incl. Macadam road. 186.00 155.25 Cumt.
Lowering, laying and jointing PVC pipes and specials of following class
and diameter including cost of conveyance from stores to site of works
including cost of labour, material, except cement solvent, giving
satisfactory hydraulic testing as per ISI code.
Refilling the pipeline trenches incl. ramming, watering, consolidating
desposal of surplus stuff as directed within a radius of 3 km. 452.75 25.30 Cumt.
Making job connection for old pipes in connecting the pipe line with
existing main and inserted of special incl. Cost of excavation cutting of
pipes, dewatering testing refitting etc. complete incl. all jointing materials
etc. comp. (excl. cost of specials, pipes and fittings) 4.00 622.00 Nos.
Providing and supplying ISI mark CI D/F Sluice Valves as per IS:14846
(Latest Edition) of following class and diameter including all taxes,
insurance, transportation, freight charges, octroi, inspection charges,
loading, unloading, conveyance to departmental stores, stacking etc.
complete. PN-1 With hand/wheel cap operated (Alt-1 Type long body)
Lowering, laying and jointing in position following C. I. / D/F Reflux valves,
Butterfly valves, Sluice valves and Air valves including cost of all labour,
jointing material, including nut bolts and giving satisfactory hydraulic
testing, etc. complete. (A) Sluice valves, Butterfly Valves, Reflux Valves
Total Amounts Rs...……
Total Amounts Rs...……
Stamp with Signature of Contractor
Consl. Engineer Engineer
"DESIGN POINT" Dhrol Nagarpalika
Chief Officer President
Dhrol Nagarpalika Dhrol Nagarpalika
DHROL NAGARPALIKA - DHROL
DIST :- JAMNAGAR
SCHEME : SJMMSVY (UDP-88) YEAR-2025-26
NAME OF WORK:- PROVIDING SUPPLYING LOWERING LAYING, JOINTING 75mm PVC PIPE LINE
LOCATION:- W-2, Barnala to Karabhai House, At. Dhrol
SCHEDULE - "B-14"
PERCENTAGE RATE TENDER
Item No. & Description Quantity Rate Per Amount
Providing and supplying in standard length ISI mark rigid unplasticised PVC
pipes suitable for potable water with ring fit joint including cost of rings, as per IS
specification no. 4985/1988 including all local and central taxes, transportation,
freight charges, octroi, inspection charges, loading, unloading, conveyance to the
departmental stores and including cost of jointing material etc. complete. One
coupler / ring shall be provided with each full length pipe cost of which is included
in rates below. Test Pressure 6 Kg/cm2. (75mm Dia) 1000.00 132.00 Rmt.
Providing and supplying at store or site of work inclu. Freight, loading, unloading,
2 % as per Item No.
stacking insurance & all taxes etc. such Tee, Bend, Reduser, etc.
Excavation for pipe line trenches for water supply, sewerage line, manhole etc.
all with shoring and struting if required as per required gradient and line including
safety provisions using site rails and stacking excavated stuff including up to all
required lead cleaning the site etc. complete for all lifts and strata as specified.
(a) In all sort of soils and soft murrum 387.00 102.35 Cumt.
(b) In hard murrum, boulders, incl. Macadam road. 258.00 155.25 Cumt.
Lowering, laying and jointing PVC pipes and specials of following class and
diameter including cost of conveyance from stores to site of works including cost
of labour, material, except cement solvent, giving satisfactory hydraulic testing as
per ISI code. (75mm Dia) 1000.00 17.25 Rmt.
Refilling the pipeline trenches incl. ramming, watering, consolidating desposal of
surplus stuff as directed within a radius of 3 km. 640.58 25.30 Cumt.
Making job connection for old pipes in connecting the pipe line with existing main
and inserted of special incl. Cost of excavation cutting of pipes, dewatering
testing refitting etc. complete incl. all jointing materials etc. comp. (excl. cost of
specials, pipes and fittings) 1.00 622.00 Nos.
Providing and supplying ISI mark CI D/F Sluice Valves as per IS:14846 (Latest
Edition) of following class and diameter including all taxes, insurance,
transportation, freight charges, octroi, inspection charges, loading, unloading,
conveyance to departmental stores, stacking etc. complete. PN-1 With
hand/wheel cap operated (Alt-1 Type long body) (80mm Dia) 2.00 2857.00 No.
Lowering, laying and jointing in position following C. I. / D/F Reflux valves,
Butterfly valves, Sluice valves and Air valves including cost of all labour, jointing
material, including nut bolts and giving satisfactory hydraulic testing, etc.
complete. (A) Sluice valves, Butterfly Valves, Reflux Valves (80mm Dia) 2.00 460.00 No.
Total Amounts Rs...……
Total Amounts Rs...……
Stamp with Signature of Contractor
Consl. Engineer Engineer
"DESIGN POINT" Dhrol Nagarpalika
Chief Officer President
Dhrol Nagarpalika Dhrol Nagarpalika
DHROL NAGARPALIKA - DHROL
DIST. : JAMNAGAR
SCHEME :- SJMMSVY (UDP-88) YEAR-2025-26
NAME OF WORK :- CONSTRUCTION WORK OF PAVING BLOCK ROAD
Location Chart For Schedule-B15
Sr No. Location Length Width
1 W-1, behind Lalitbhai Police House to Dafervas 180.00
3 W-1, Chamunda Plot, Jigneshbhai Corporater's Street 45.00
4 W-1, Kiranbhai Batikbhai Parmar House to Mohitbhai Dhirubhai House 65.00
Stamp with Signature of Contractor
Consl. Engineer Engineer
"DESIGN POINT" Dhrol Nagarpalika
Chief Officer President
Dhrol Nagarpalika Dhrol Nagarpalika
DHROL NAGARPALIKA - DHROL
DIST :- JAMNAGAR
SCHEME : SJMMSVY (UDP-88) YEAR-2025-26
NAME OF WORK:- CONSTRUCTION WORK OF PAVING BLOCK ROAD
LOCATION:- As Per Location Chart, At. Dhrol
SCHEDULE - "B-15"
PERCENTAGE RATE TENDER
Item No. & Description Quantity Rate Per Amount
Box cutting the road surface to proper slope and camber for making a
base for road work including ramming the excavated stuff and despositing
on the road side slope as directed up to all lead and sretta. 369.00 111.85 Cumt.
Providing and laying cement concrete 1:3:6 (1 cement : 3 coarse sand :
Machine cut stone aggregate 40mm nominal size ) and curring complete
including cost of formwork in (a) Foundation and plinth 147.60 3268.36 Cumt.
Providing and fixing Pre-cast rubber dye / steel dye inter locking concrete
block 60mm thick with grade of concrete M-300 punmatic compressed by
mechanically pressed and as per approved design confirming to IS
15658:2006 including 35mm sand layer for levelling and filling the joints
with sand in proper line and level asper guidlines of IRC : 63-2018 etc
(Agency must Fill the rate of 80mm thick & M-300 grade paver block
instead of 60mm paver block) 1230.00 707.55 Sqmt
Providing cement vata (10cm. x 10 cm. size) quarter round in cement
mortar 1:1 including neat cement finishing, watering etc. complete. 620.00 24.28 Rmt
Tracing of old Manhole. All Types Of Manhole. 10.00 1214.02 No.
Modification of Existing House Connection Chambers, Risening up to
23cm. average of 0.23m wide R.c.c Copping with Inside 15mm Thick
Cement Plaster, Curing and Dismentaling existing Chamber's Precast
cement frame and Cover and also fitting the copping work as directed as
required and also refitting of existing house connection chamber's coller
and cover as required. 21.00 909.00 No.
Total Amounts Rs (A)...……
Total Amounts Rs (A)...……
Stamp with Signature of Contractor
Consl. Engineer Engineer
"DESIGN POINT" Dhrol Nagarpalika
Chief Officer President
Dhrol Nagarpalika Dhrol Nagarpalika
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
RAW_HTML
01 Tender.pdf
02 Form B-1.pdf
03 Schedule B.pdf
04 Drw and Section.pdf
05 Term and Condition.pdf
06 Specifications of Road Work.pdf
07 Specifications of Building Work.pdf
08 Vendor list - Civil as on Dt. 28.05.2025.pdf
09 Vendor Civil work.pdf
10 Test Require for Construction Material.pdf
11 GR All.pdf
11.2 GR Affidavit.pdf
Download all tender documents and submit your bid