Provision of Power House at Main Receiving point and allied works for Srikona Grn Assam

Schedule 'A' Part - I ( External Electric Supply)

Supply laying & testing cable XLPE insulated screened PVC bedded, galvanised steel strip or wire armoured, electric power cables (heavy duty) with stranded aluminium conductor, 11000 volts grade of size 3 core 150 Sqmm

Supply and lay cable XLPE Insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 3.5 core 185 sqmm.

-Ditto- but 3.5 X 150 sqmm

-Ditto- but 3.5 core 120 sqmm

-Ditto- but 3.5 core 95 sqmm

-do- 3.5 core 70 sqmm

-Ditto- but 3.5 core 50 sqmm Note for Item No 1 to 7 : Note for Item No 1 to 7 : Earth work excavation, sand filling, bricks for cable protection,GI pipe and PCC work should be included the cost of rate each running meter quoted by the bider

Supply and fix cable jointing kit for 11 KV grade cable for out door termination heat with jointing material and accessories suitable for 3 core 150 sqmm

Supply and fix double compression copper stain less steel gland for fixing armoured cable in panel of 3.5 core 185 sqmm size.

-do- but 3.5 x 150 Sqmm

-do- but 3.5 core 95 to 120 Sqmm

-do- but 3.5 core 50 to 70 Sqmm

Supply and installation of HT 11KV, 3 phase, 50 cycles totally enclosed metal clad swicthgear complete with Vacum circuit breaker outdoor type having reputing capacity upto 350 MVA of rating 630 Amps two incomming and two out goining.

Earthing for poles & other machinery equipment using GI wire as earthing lead and MS galvanized earth Plate of size 60 cm x 60 cm x 6 mm as earth electrode.

Earthing of machinery equipment installed at power huse/sub station using 32X6 mm galvanised MS Strip & MS galvanised plate of size 600x600x6mm as earth electrode

Supply and erect 2 pole structure on 11 mtr PCC pole consisting of PCC pole with anticlimbing device PCC foundation & cross arms etc.

Supply and install HT 11 KV out door type gang operaterd Air Break Switch Suitable for Horizantal and vertical mounting fix type complete with 9 insulators of rating up to 200 Amps

Supply and fix lighting Arrester HT11 KV 10KA Station class

Fencing with 4mm dia galvanised steel wire 150 x 100mm mesh made up into mattresses or cages Lapped wired and laid in position including providing angle iron post of size 50mm x 50 mm embeded with concrete including flat iron 20mm x 4mm with GI tying wire etc.

Collapsible steel gate, top hinge consisting of channel pickets pivoted flat bars top and bottom runners brass handles etc as specified errected in position and securing runners with hold fast and brackets complete,

Supply and fixing energy saving envisronmental long life LED street light fittings 100 watts IP65.

Material and labour for steel tubler sweage pole complete with cost iron base plate finial taper plug, bolt, nuts and screws at specified type 410 SP-31 (9 Mtr ) long.

24.Supply and installation of Galvanized steel high mast lighting system of 20 Meter in two setion,3 mm section thickness,top dia 150mm, bottom dia 340mm,with 2/3 wire rope system and its accossories, system is suitable for loading 06 Nos 200 to 300 Watts LED lights

Supply and fixing LED flood light 210 watts IP65.) for ( High mast light).

Schedule 'A' Part - II (Power House)

Construction of Power House all as per the approved drawings and specification as specified by HQ IGAR (E) Drawing No IGAR (E)/Engr/2025/03.

Schedule 'A' Part - III (Internal Electric Supply for Power House Building)

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class with piano type switch, phenolic laminated sheet, suitable MS box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.

Wiring for light/ power plug with 2X2.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface/recessed medium class PVC conduit alongwith 1 No. 2.5 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.

Wiring for circuit/ submain wiring 2 X 4sq. mm + 1 X 4 sq. mm earth wire of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.

Supplying and fixing piano type switch 3 pin 5/6 A on the existing switch box/ cover including connections etc. as required.

Supplying and fixing following piano type switch 3 pin 15/16 A on the existing switch box/ cover including connections etc. as required.

Supplying and fixing following piano type 3 pin 5/6 A socket outlet on the existing switch box/ cover including connections etc. as required.

Supplying and fixing following piano type 6 pin 15/16 A socket outlet on the existing switch box/ cover including connections etc. as required.

Supplying and fixing ceiling rose including connections etc as required.

Supplying and fixing call bell/ buzzer suitable for single phase, 230 V, complete as required.

Supply and fixing bell push switch 6 Amp complete all as specified and as as directed.

Supply and fix the following way single pole and neutral steel sheet, MCB Distribution board 8 way 240 Volt on surface and recess complete with tinned copper busbar and nuetral busbar earthbar,dinbar,interconnections,powder painting including erarthing as required all as directed by Engr-in-Charge.

Supplying and fixing PVC batten/ angle holder including connections etc. as required.

Supply,installation and testing and commissioning of of pre wire LED 20W, 230 Volt , 50 Hz fluorescent complete with all sccessories and tube ,lamp etc directily on ceiling/wall, including connections with 1.5 Sqmm FRLS copper conductor, single core cable and earthing etc as rwequired

Supply and fixing 5A to 32 A rating,240 Volt,10 KA 'C' Curve miniature circuit breaker single suitable for inductive load of existing DBs complete with connections testing and commissionig ets. As required

Supply and fixing 5A to 32 A rating,240 Volt,10 KA 'C' Curve miniature circuit breaker Single pole and neutral suitable for inductive load of existing DBs complete with connections testing and commissionig ets. As required

Supply and fix steped type fan regulator 230 Volt complete all as directed by Engr-in-Charge

Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC)

Supply and fix exhaust fan, steel body AC single Phase. 230V of size 450mm sweep with, blades, and frame and louvers

Supply and fix Mirror/Picture light 10 W, 230 Volt, 50 HZ all as directed by Engr-in- Charge.

Schedule 'A' Part - IV (LIGHTING CONDUCTOR)

Providing and fixing of lighting conductor finial, made of 25 mm dia 300 mm long, GI tube having single pole at top with 85 mm dia 6 mm thoick GI base plate including holes etc complete as required.

Jointing coopper/ GI plate ( with another copper /GI plate base of finial or any other metalic object by riveting/nut bolting/sweating and soldering ets as required.

Providing and fixing of G.I tape 20 mm X3 mm thick on parapet surface of wall for lighting conductoer complete as required (For horizantal run)

Providing and fixing of G.I tape 20 mm X3 mm thick on parapet surface of wall for lighting conductoer complete as required (For Vertical run)

Providing testing point made 20mm X 3mm thick GI strip, 125 mm long with 4 Nos of GI bolts, nuts,chuck nuts and spring washers etc complete as required.

Providing and fixing 25mm X5 mm G.I strip on surface or recess for connectios etc as required.

Earthing with GI earth plate 600mm X600mmX3 mm thick including accessories, providing masonary enclosure with cover plate having locking arrengement and watering pipe of 2.7 metre long etc.with charcoal/coke and salt as required all as required

Supply and fixing of light class GI pipe light grade of 50 mm dia (nominal) 3 metre length for earth conductor proctection.

Schedule 'A' Part - V (Internal water supply and sanitary installation)

Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid.

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps.

Providing and fixing G.I. Pipes complete with G.I. fittings and clamps, i/c making good the walls etc. concealed pipe, including painting with anti corrosive bitumastic paint, cutting chases and making good the wall :15 mm dia nominal bore

Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. External work 20 mm dia nominal bore

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.

Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 : 15 mm nominal bore

Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. 15 mm nominal bore

Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 15mm nominal bore

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Flexible pipe 40 mm dia

Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : Circular shape 450 mm dia

Providing and fixing uplasticised PVC connection pipe with brass unions : 45 cm length 15 mm nominal bore

Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet : 150 mm diameter

Construction of 10 user septic tank for toilet blocks with common burnt clay F.P.S (non modular) bricks of class designation 7.5 and RCC slab cover all as per drawing and specification and drawing No MRR/Engr/115/02 sheet no 2/2.

Making soak pit 2.5 m diametre 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks and S.W. drain pipe 100 mm diametre, 1.8 m long complete as per standard design 19.32.1 with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 MRR/Engr/115/02 sheet no 2/2.

Construction masonry chambers 60 x 60 x 75 cm inside, in brick work in cement mortar 1:4 for sluice valve, with C.I. surface box 100 mm top dia 160 mm bottom dia and 180 mm deep (inside) with chained lid and RCC top slab 1:2:4 using graded aggregate 20 mm nominal size including necessary excavation, foundation concrete 1:5:10 using graded aggregate 40 mm nominal size and inside plasteriung with cement mortar 1:3, 12 mm thick finished with a floating coat of neat cement complete as per std desigen with common burnt clay F.P.S. (non modular) bricks of class degisignation 7.5 MMR/Engr/115/02 sheet 2/2.

Schedule 'A' Part - VI (Levelling work)

Levelling work

Schedule 'A' Part - VII (Footpath with paver block)

Earth work in surface excavation not exceeding 30cm in depth but exceeding 1.5 m in width as well as 10 sqm on plan including disposal of excavated earth upto 50 m and lift upto 1.5 m disposal soil to be levelled and neatly dressed . All kind of soil.

Supplying and laying stone aggregate of 90 to 45 mm size of WBM with moroum as binding material including 13.2mm size stone screening sorting, watering spreading to template, compacting stone aggregate in uniformed thickness and consolodiation with power road roller of 8 to 10 tonne capacity in two layer with proper gradient and camber etc complete(150mm thick ).

Providing and laying of position cement concrete of specified grade excliding the cost of centering and shuttering with mix of 1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources).

Providing and laying 60mm thick factory made cement concrete paver block of approved shape and colour of M -30 grade made of C&D waste by block making machine with vibratory compaction laid in required pattern and including over 50mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge.

Schedule 'A' Part - VIII (Storm water drain)

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottom

Providing and laying in position cement concrete (cast-in-situ) 1:4:8, excluding the cost of centering and shuttering

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:3:6

Providing and laying in position centering and shuttering including strutting, propping etc. and removal of form for : Foundations, footings, bases of columns, etc. for mass concrete

12 mm cement plaster finished with a floating coat of neat cement of mix : 1:4 (1 cement: 4 fine sand).

Schedule 'A' Part - IX (Mannual Fire alarm system)

Supply and fix Detectors Complying with and type certified to EN - 45 Addressable type heat detector Photoelectric /Optical with base with self built intelligence as per IS: 11360 sensor edward sense response indictor lamps mounting based on 'J' box for fixing etc all as specified

ditto Item No -1 but Addressable type multisensor detector with smoke combinatio all as per directed by Engr-in - Charge.

Supply and fix testing and commissioning of response indicator made from 16 SWG CRCA sheet having dust red LED indicator & provn of cable wire entry from top make size safe zone all as directed by Engr-in- Charge.

Supply and fixing manual call point ( Add control moudle) made fron 18 SWG CRCA Sheet having single LED indicator and release type push botton incase of fire break glass printed on fruit cover with chain and hammer all as directed

Fire Alarm Sounders / Sirens Electronic type horizontal single stage continous normal operation for atleast 50 minutes with sound level 65 DB to 120 DB measured at 1.5 Mtr with sound output variation of + 5 DB 500 mtrs range all as directed.

Fire alarm control panel complying with BSEN 54 Single loop panel of capacity from 99 detectors & 99 modules upto 200 detector and modules specified all as directed.

Supplyn and fix steel enmaled black MS conduit along with accessories 25 mm size dia ISI marked on ceiling or recessed as required and making good the same distrubed surfaces all as specified and directed.

Supplyn and fix steel enmaled black MS conduit along with accessories 20 mm size dia ISI marked on ceiling or recessed as required and making good the same distrubed surfaces all as specified and directed.

Supply and draw in steel conduit multy stand copper conductor 1.0 sqmm single core . FRLS 1100 Volt grade complete all as directed, number of to be drawn through each conduit shall be as directed by Engr-in- Charge.

Schedule 'A' Part - X (Telephone conduit)

Supplying and fixing of 25 mm sizes of medium class PVC conduit along with accessories in surface / recess including cutting the wall and making goog the same in case of recessed conduit as required all as directed.

Schedule 'A' Part - XI (Furniture)

Supplying Charpoy PLB of KROMAA makes as per the architectural drawings and the directions of Engineer-in-charge.

Sypplying table 90 x 60 with drawer of WENGE makes as per the architectural drawings and the directions of Engineer-in-charge.

Supplying wooden chair of BLAKE makes as per the architectural drawings and the directions of Engineer-in-charge.

Supplying almirah metal of GAMER makes as per the architectural drawings and the directions of Engineer-in-charge.

Supplying peg stay of SUPREME makes as per the architectural drawings and the directions of Engineer-in-charge.

Ajay Enterprise (BID ID -3264731)