SPECIAL REPAIR TO PIPE FITTING SHOP (BLDG NO P-26) AT NSRY (K) AT NAVAL BASE KOCHI

Amount

Dismantling asbestos cement (corrugated, semi-corrugated,etc.) sheets in roof coverings complete all as specified and directed.

Dismantling plain or corrugated steel sheeting, any guage, any thickness, including Nainital or similar pattern roof coverings complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for,complete all as specified and directed.

M&L for pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ridge to wall, fixed with self tapping screws complete all as specified and directed.

Demolition of concrete of any description and in any position not otherwise specifically provided complete all as specified and directed.

Hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed.

M&L for reinforced cement concrete for suspended slab,basement slabs etc type B1,1:2:4 using 20mm graded stone aggregate complete all as specified and as directed.

M&L forming Contraction (Dummy ) joints 65 mm deep x 10mm wide, filled with sealing compound of grade A complete all as specified and directed.

M & L 100 mm thick PCC type D-2, 1:4:8 (40mm graded aggregate) for Sub base to floor, finished even and smooth with out using extra cement complete all as specified and directed.

M & L 40 mm thick PCC type B-0, 1:2:4 (12.5mm graded stone aggregate) hard standing, finished even and smooth with out using extra cement complete all as specified and directed.

M&L screed or bedding layer of mortar 15 mm thick for laying floor finish in CM 1:4 complete all as specified and as directed.

M & L Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed. Note: Screed bed shall be measured and paid sepereately under item No. 12 above.

S&F structural steel work in joist,channels ,angles or tee sections including washer etc. complete using ERW or induction butt welded tubes conforming to fe -410W (gde E-250) quality complete all as specified and directed.

M&L for preparation of new steel surfaces of any description, over 10cm in width or girth,not otherwise described and applying two coats of anti corrisive paint over a coat of red oxide primer complete all as specified and directed.

M&L for preparation of old painted steel surfaces of any description, over 10cm in width or girth,not otherwise described and applying a coat of polyurethane paint complete all as specified and directed.

Demolition of brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars,etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.

M&L for Pre-cast cement concrete block masonry type B1, 1:2:4 (20 mm aggregate) with solid blocks, exc. 10 cm in width and setting in 1:6 cement mortar, complete all as specified and directed.

Taking down cement plaster on brick or stone walls,etc. including raking out joints,hacking for key,scrubbing down with water,etc. of any description complete all as specified and directed.

M&L rendering 18mm thick in two coats( 8mm thick cement mortar 1:6 over a backing coat of 12mm thick cement mortar 1:4) on fair faces of brick work or concrete surfaces in cement mortar with WPC finished even and smooth complete all as specified and as directed. Note: WPC shall be measured and paid seperately under relevant items.

M&L for preparation of new plastered surfaces and applying two coats of oil bound distemper over a coat of alkali resistant primer complete all as specified and directed.

M&L for preparation of old distempered surfaces of walls by washing, rubbing down and stopping of distempered and painted surfaces and applying a coat of oil distemper emulsion complete all as specified and directed.

M&L for preparation of old decorated surfaces of walls including cornices (plastered or unplastered) and applying one coat of colour wash complete all as specified and directed.

M&L for complete removal of existing treatment and application of one coat of primer and allowed to dry overnight before applying first coat of antifungal paint complete all as specified and as directed. Note :- Before application of primer coat, the moisture of the wall surface shall be checked with a moisture meter .

M&L for application of first coat of antifngal paint on primed wall surface using rollers made from foam or synthetic fibres,to get a smooth and tint free surface and allowed to dry for at least 8 hrs/ overnight to receive second coat of anti fungal paint complete all as specified and as directed.

M&L for application of second coat of anti fungal paint on primed wall surface using rollers made from foam or synthetic fibres,to get a smooth and tint free surface complete all as specified and as directed. Note for item No. 24,25 & 26: Sample coat of 1 Sqm shall be carryout before starting the work for getting approval from GE

M&L for preparation of old decorated surfaces on ceiling including cornices (plastered or unplastered) and applying a coat of white wash complete all as specified and directed.

Dismantling floor hearth or wall tiling including cement mortar bedding removing serviceable tiles to store & rubbish off the premises complete all as specified and directed.

M&L for 25mm thick cement concrete type B-1, 1:2:4 mix as in flooring as levelling complete all as specified and directed.

M&L for acid resistant tiles 15mm thick vitreous ceramic, unglazed, set, jointed and pointed in chemical resistant mortar, resin type, in floors over 15mm thick screed in CM 1:4 for laying floor finishes complete all as specified and directed.

M&L for Vitrified Ceramic tiles light shade10mm thick (square / rectangular) polished, area of each tiles n. exc. 0.36 sqm, in floors etc. set & jointed in neat cement slurry & pointed in white or coloured cement to match over 15mm thick screed bed in CM 1:4 complete all as specified and directed.

M&L for non skid ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exc 0.18sqm but n. exc 0.38 sqm, in floors etc. set and jointed in neat cement slurry & pointed in white or coloured cement to match over 15mm thick screed bed in CM 1:6 complete all as specified and directed.

M&L for glazed ceramic coloured tiles in vertical surface 350X250X7mm/ 450X350X7mm thick set & jointed in neat cement slurry & pointed in white or colour cement to match over 10mm thick rendering in CM 1:4 complete all as specified and directed.

Raking out crumble joints to RCC slab and wall built in cement mortar and refilling of sealant compound for reqd thickness and necessary form work complete all as specified and directed. (Make : Fosroc or equivalent)

Taking down the existing water proofing treatment from the roof including cement mortor, removing debris off the premises and cleaning the roof complete all as specified and directed.

M&L for rendering 10m thick on concrete/brick surfaces in CM 1:3 with and including 3% WPC (by weight of cement) over neat cement slurry with 3.0 Kg of cement per sq.metre complete all as specified and directed. Note:water proofing compound will be measured and paid seperately

Supply only integral water proofing compound complete all as specified and directed.

M&L for applying oil bitumen primer 0.20Kg/Sqm provided and laying 4mm thick APP modified water proofing membrane weighing not less than 4Kg/Sqm reinforced with non woven polyster matt weighing not less than 160gm/Sqm having softening point not less than 650N/Sqm, tearing strength of 180N/Torque application including minimum 10cm side overlap and 15cm end laps , finishing with solar reflective bitumen aluminium paint @ 0.10Kg/Sqm complete all as specified and directed.

Dismantling ceiling boards any thickness including cover fillets complete all as specified and directed.

S&F aluminium snap grid false ceiling frame work of angle 25 x25 x 2mm. Main TEE 38 x 25 x 1.5mm and cross TEE 25 x 25 x 1.4mm with size of grid 605x605mm including hangers 6 mm dia. G.I. (upto1200mm length) adjusting levelfixed to roof slabs by means ofceilling cleats made out of G.I.flat 40 x 3 mm size 60mm longand expansion hold fasteners12.5mm dia. 40mm long for any height up to and including 15m with 4 mm thick non asbestos fibre cement building boards fixed to aluminium form work complete all as specified and as directed.

M&L for three coats of white washing to ceiling including preparation of surfaces complete all as specified and directed.

Taking down chowkats or frames with shutters(without taking off shutters from frames) n.exc 1.5 Sqm each complete all as specified and directed.

All as per item No: 42 above but exc 1.5 Sqm but n. exc. 4 Sqm each complete all as specified and directed.

M&L 2 nd class hard wood Plain , solid , straight chowkats and frames , wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, complete all as specified and directed.

S&F 35mm thick, factory made 2nd class HW plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers complete all as specified and directed.

S&F for Anodised aluminium powder coated frame for windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.

S&F for Anodised aluminium powder coated window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and directed.

S&F 4 mm thick plain sheet glass ordinary quality glazing with oil putty and glazing pins/spring clips in square not exceeding 0.5 Sqm in each pane complete all as specified and as directed.

S&F 4 mm thick frosted glass pin head type and glazing with oil putty/ beads in squares not exceeding 0.5 Sqm in each pane complete all as specified and as directed.

S&F anodised aluminium powder coated grill,having mesh size 50X50mm made out of 6mm wide 3 mm thick aluminium section including U clips and all accessories complete all as specified and as directed.

S&F Aluminium powder coated sliding type window with 4.00 mm thick plain sheet glass including provision of tight heading and handling arrangements complete with using the following sections complete all as specified and directed. Outer frame 50.80x25.40x1.50mm 3 Track frame 43.66x22x1.22 mm Shutter frame 31.80x14.50x1.20 mm Shutter interlock 31.80 x 20.50x1.20

M&L for preparation of new wooden surfaces of any description over 10cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L for preparation of old painted wooden surfaces of any description over 10cm width or girth and applying a coat of French polish complete all as specified and directed.

S&F Solid PVC Door Frame of size 50mm x47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube complete all as specified and directed.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together complete all as specified and directed.

S&F 100mm butt hinges, medium weight, cold rolled mild steel complete all as specified and directed.

S&F 75 mm butt hinges, medium weight, cold rolled mild steel complete all as specified and directed.

S&F 100 mm size aluminium anodised alloy handle, fabricated type complete all as specified and directed

S&F 150 mm size aluminium anodised alloy handle, fabricated type complete all as specified and directed

S&F 250mm long aluminium alloy, anodised sliding door bolt with hasp and staple (bolt type) and fixing clip of sheet cast or extruded sections and fixing bolts and sliding bolt of extruded sections or cast aluminium alloy and fixed complete all as specified and directed

S&F 75mm Aluminium anodised barrel tower bolt complete all as specified and directed

S&F 150 mm Aluminium anodised barrel tower bolt complete all as specified and directed

S&F mild steel work as in band, strap, hold fast, cleat, hook, hinges, base tie for foor frame, support or stay for rain water pipe etc and other similar items conforming to Fe-410-0 or Fe-310-0 complete all as specified and directed

S&F Aluminium powder coated door frame and shutter including 5 mm thick plain sheet glass/ 12 mm thick pre laminated particle board interior grade prelaminated on both sides,lock,handle,door closer and all fittings etc complete with the following sections complete all as specified and directed Outer frame 63x37x1.5 Shutter frame 50x44.5x1.8 mm Top rail 50x44.50x1.50 Bottom rail 96x44x1.8 Lock rail

Dismantling structural steel work including doors ,gates but excluding framed truss complete all as specified and directed

M &L for Steel rolling shutters 1.00 mm in thick, with ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete: push pull or manual type complete all as specified and directed

S&F in repair Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) complete all as specified and directed

S&F 10 litre capacity PVC flushing cistern low level in repair white colour with inlet ball valve float and handle incl brackets complete all as specified and directed

S&F in repair vitreous china urinal half stall type white excluding flushing cistern flush pipe and waste pipe and including 5 litre cast iron automatic flushing cistern complete all as specified and directed

S&F viterous china urinal partition white in colour and size 310 x 770mm complete all as specified and directed

S&F in repair vitreous china wash basin white flat back size 580 x 450 plug excluding taps, waste , chain and plug and porcelain stopper but including brackets complete all as specified and directed

S&F in repair aluminium anodised tubular towel rail 20 mm dia,D type 60cm long complete all as specified and directed

M & L for 110 mm dia PVC SWR pipe single socketed in any length with rubber rings joints, laid in trenches or in floors complete all as specified and directed

M&L for PVC SWR bends 110mm any radius with access door complete all as specified and directed

M&L for PVC SWR floor trap 75 mm with grating inlcuding jointing with solvent cement complete all as specified and directed

S&F in repairs 15mm Pillar taps (fancy type), cast copper alloy, with capstan heads,chromium plated,screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts complete all as specified and directed

S&F towel ring of PTMT fixed with and including plated brass screws and wooden/plastic cleats complete all as specified and directed

M&L for testing manholes as specified by filling with water complete all as specified and directed

S&F health faucet ABS body with wall hook and 1 mtr SS braided rubber hose pipe, all as per specified and directed : Make Cear/ hindware/ Jaquare

S&F in repair 32mm Waste coupling of PTMTBore dia of discharge pipe (half or full threaded) . (Minimum weight 32mm- 45gms/40mm-60 gms) complete all as specified and directed

S&F plastic water closet seat white/coloured,closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed (Make : Commander/Hindware)

S&F in repair 15mm bore PVC connection pipe 600 mm long with PTMT nuts at bolt ends complete all as specified and directed

M&L RCC Type B1, 1:2:4, using 20mm graded aggregate in Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed

Formwork to sides fair finished and soffits of floor or roof beams, beam haunchings,girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, complete all as specified and directed etc.

M&L TMT bars 10mm dia and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns and including mild steel wire (annealed) not less than 0.90mm dia or securing with clips complete all as specified and directed

M&L for TMT bars in reinforcement 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as specified and directed

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. Removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, complete all as specified and directed

M&L point wiring using proper colour coding complete with 1100 Volts grade 1.5 Sqmm PVC insulated unsheathed FRLSH grade confirming to IS-694 multistranded single core copper conductor cable in PVC concealed conduit rigid non metallic medium grade of suitable size with all conduit accessories on wall except beam, column and RCC roof and chases cutting incl 2 mm thick MS sheet pressed terminal box (recessed) with 3mm thick laminated hylem top cover incl 1.5 Sqmm PVC insulated copper conductor earth continuity wire green colour for one light/fan point controlled by one switch complete all as specified and directed

M&L point wiring using proper colour coding complete with 1100 volts grade 1.5 Sqmm PVC insulated unsheathed FRLS grade comfirming to IS 694 multistranded single core copper conductor cable in surface stove enmelled steel conduit rigid metallic medium grade of suitable size with all conduit accessories on wall including 1.6mm thick MS sheet pressed terminal box(recessed) with 3mm thick laminated hylem top cover including 1.5Sqmm PVC insulated copper conductor as earth continuity wire green colour for one light point controlled by one switch complete all as specified and as directed.

All as per item No 89.above but for one 5 pin 5 amps socket outlet on the same board complete all as specified and directed

All as per item No89.above but for one 5 pin 5 amps socket outlet an independent board complete all as specified and directed

All as per item No 89 above but with 2.5 Sqmm copper conductor including 2.5 Sqmm copper cable on earth wire for one 6 Pin 16 Amps Socket outlet independent board complete all as specified and directed

All as per item No 89 above but with 4 Sqmm copper conductor including 4 Sqmm copper cable on earth wire for one 6 Pin 16 Amps Socket outlet independent board complete all as specified and directed

S&F switch piano flush type 5A one way complete all as specified and directed

S&F S/S combination 5 pin 5 Amps flush type complete all as specified and directed

S&F S/S combination 6 pin 15 Amps flush type multi purpose complete all as specified and directed

S&F fan regulator electronic electronic socket, 5 step,single phase,240V complete all as specified and directed

S&F ceiling rose surface bakelite 65 x 50mm 3 terminals complete all as specified and directed

Taking down Ceiling fan/exhaust fan, painting,of ceiling fans/exhaust fan including down rod of ceiling fan and louvers of exhaust fan complete with sinthetic enamel paint by spraying including filling cavities with filler one coat after cleaning all dust etc ang hanging in original position and connecting up including provision of cable from ceiling rose or connection to fan complete all as specified and directed

S&F suspended type LED fitting of wattage 30 W,240 V,50 Hz system lumen ouput 2830 Lm with aluminium extruded powder coated white housing ,complete assembly with LED,driver and accessories prewired upto terminal block including all connection all as specified and as directed.Make: Philips cat part No. SP781P LED 33S-6500PSUW6L112 OD SI or CG part No. LCLP54-36-CDL or any other equivalent make mentioned in list of manufactueres,

S&F surface mounted LED light max wattage of 30-36 watt ,240 V,50 Hz,system lumen ouput 3000 Lm with CRCA white powder coated housing with CRCA cover and electronic driver duly wired up to the terminal block including all connection all as specified and as directed.Make: Philips cat part No. RC 380B LED36S-6500 G4L60W60PSD OD or CG cat part No. LCRTH-36 -CDL or any other equivalent make mentioned in list of manufactueres,

S&F 07-10 W LED type mirror light fitting with tube and provided with high output diffuser including all electrical connection all as specified and directed .Make: Philips cat part No. BN021 LED10S-6500 PSU GR51 or Luker cat part No. LMR10 or any other equivalent make mentioned in list of manufactueres,

S&F 2x18W LED flame proof industrial tube light fitting ,CMRI approved with IP 65 protection including all connection all as specified and as directed.Make: CG cat part No. EXTN2LT8-16/20 or any other equivalent make mentioned in list of manufactueres,

Switch flame proof rotary type with termination box in LM6, 16A, single pole 240V complete all as specified and directed

S&F LED street light of max wattage 30 watt,system lumen ouput 3000 of aluminium pressure die cast housing,complete assembly with LEDs,driver and accessories pre wired upto terminal block and suitable dia GI pipe including all connection all as specified and as directed.CMake: CG cat part No. TRP-400-30-57-SL-LM-NSR /philips cat part No.BR046 LED 30 CW MR S1 PSU GR or any other equivalent make mentioned in list of manufactueres,

M&L for sub main wiring using proper colour coding 1100 Volts grade with 4 runs of 10 Sqmm (FRLSH) grade PVC insulated unsheathed multistranded copper conductor cable and 2 run of 10 Sqmm (FRLSH) cable as earth continuity wire drawn through and including PVC conduit medium grade not less than 25 mm dia with all conduit accessories concealed in wall/floor including cutting chesses and making good disturbed surface to match with existing surface complete all as specified and directed Note - 4 runs of 10 Sqmm sub main wire and on 2 run of 10 sq mm submain wire for earthing and PVC conduit pipe with accesories shall be measured as one unit.

M&L for sub main wiring using proper colour coding 1100 Volts grade with 4 runs of 6 Sqmm (FRLSH) grade PVC insulated unsheathed multistranded copper conductor cable and 2 run of 6 Sqmm (FRLSH) cable as earth continuity wire drawn through and including PVC conduit medium grade not less than 25 mm dia with all conduit accessories concealed in wall/floor including cutting chesses and making good disturbed surface to match with existing surface complete all as specified and directed . Note - 4 runs of 6 Sqmm sub main wire and on 2 run of 6 sq mm submain wire for earthing and PVC conduit pipe with accesories shall be measured as one unit.

M&L for sub main wiring using proper colour coding 1100 Volts grade with 2 runs of 6 Sqmm (FRLSH) grade PVC insulated unsheathed multistranded copper conductor cable and 1 run of 6 Sqmm (FRLSH) cable as earth continuity wire drawn through and including PVC conduit medium grade not less than 25 mm dia with all conduit accessories concealed in wall/floor including cutting chesses and making good disturbed surface to match with existing surface complete all as specified and directed Note - 2 runs of 6 Sqmm sub main wire and on 1 run of 6 sq mm submain wire for earthing and PVC conduit pipe with accesories shall be measured as one unit.

M&L for sub main wiring using proper colour coding 1100 Volts grade with 2 runs of 4 Sqmm (FRLSH) grade PVC insulated unsheathed multistranded copper conductor cable and 1 run of 4 Sqmm (FRLSH) cable as earth continuity wire drawn through and including PVC conduit medium grade not less than 25 mm dia with all conduit accessories concealed in wall/floor including cutting chesses and making good disturbed surface to match with existing surface complete all as specified and directed Note - 2 runs of 4 Sqmm sub main wire and on 1 run of 4 sq mm submain wire for earthing and PVC conduit pipe with accesories shall be measured as one unit.

S&F MCCB 4 pole 125 Amp 35 KA 50 Hz 415 v to MCCB DB including all connection all as specified and as directed. Make: Legrand cat Part No. 669738 /schneider cat part No.LV431653 or any other equivalent make mentioned in list of manufactueres,

S&F MCCB 4 pole 100 Amp 35 KA 50 Hz 415 v to MCCB DB including all connection all as specified and as directed.Make: Legrand cat part No. 669738 or schneider cat part No. LV431652 or any other equivalent make mentioned in list of manufactueres.

S&F MCCB 4 pole 63 Amp 35 KA 50 Hz 415 v to MCCB DB including all connection all as specified and as directed.Make: Legrand cat part No. 669736 and schneider cat part No. LV431650 or any other equivalent make mentioned in list of manufactueres.

S&F TPN DB 08 way with IP-43 protection including space for provision of 01 no MCCB 125 A as incomer and MCBs outgoing including all connection all as specified and as directed.Make: Legrand cat part No. 507752 or schneider cat part No.A9HTD08M or any other equivalent make mentioned in list of manufactueres.

S&F TPN DB 06 way with IP-43 protection including space for provision of 01 no MCCB 100 A as incomer and MCBs outgoing including all connection all as specified and as directed.Make: Legrand cat part No. 507751or schneider cat part No. A9HTD06M or any other equivalent make mentioned in list of manufactueres.

S&F TPN DB 04 way with IP-43 protection including space for provision of 01 no MCCB 63 A as incomer and MCBs outgoing including all connection all as specified and as directed.Make: Legrand cat part No. 507750 or schneider cat part No. A9HTD04M or any other equivalent make mentioned in list of manufactueres.

S&F Sheet metal enclosure SPN DB when MCB's to be used 12 way with 200 amps bus bar double door complete all as specified and directed.Make: Legrand cat part No. 507622 or schneider cat part No.A9HSND12 or any other equivalent make mentioned in list of manufactueres.

S&F Sheet metal enclosure SPN DB when MCB's to be used 8 way with 200 amps bus bar double door complete all as specified and directed . Make: Legrand cat part No. 507621 or schneider cat part No.A9HSND08 or any other equivalent make mentioned in list of manufactueres.

S&F TPN plus earth interlocking socket of IP-67 32 amps 415 V with MCB provision including all connection all as specified and as directed.Make Hensel cat part no AU 139 TS or Legrand cat part No. 657106 or schneider cat part No.A9HKS532 or any other equivalent make mentioned in list of manufactueres.

S&F TPN MCB 40 Amps, 415 Volt, 50 Hz, all as specified and directed .Make: Legrand cat part No. 408684 or schneider cat part No.A9N4P40B or any other equivalent make mentioned in list of manufactueres.

S&F SPN MCB 6 to 32 Amps, 230 Volt, 50 Hz, 10 KA all as specified and directed Cat Part No. BB20060B to BB20320B of L&T or Legrand cat part No.408609 to 408617 or schneider cat part No.A9N2P06B- A9N2P32B or any other equivalent make mentioned in list of manufactueres.

S&F SP MCB 6 to 32 Amps, 230 Volt, 50 Hz, 10 KA all as specified and directed Cat Part No. BB10060B to BB10320B of L&T or Legrand cat part No. 408587 to 408595 or schneider cat part No.A9N1P06B-A9N1P32B or any other equivalent make mentioned in list of manufactueres.

Supply, laying and testing cable XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty ) 1100 Volts grade with stranded aluminium conductor of 6 Sqmm 2 core on wall/ceiling with necessary clamps etc complete all as specified and directed.

Taking down old DBs from existing position including all electrical connection all as specified and as directed.

M&L for taking down submain wiring/LT cable from existing position including all connection all as specified and as directed.

Material and labour earthing complete with galvanised steel earth plate electrode 60 cm x 60 cm x 6 mm buried directly in ground to a depth not less than 2.25m below ground level with top edge of the earth plate at a depth not less than 1.5m below normal ground level surrounted from all side by 15 cm of thick and packed layers of charcoal dust and common salt ,filling alternate layers and electorde connected by using GI wire 4 mm dia (max -length of 7.5 mtrs )by means of bolts,nut and washer of GI and providing GI light grade pipe 15 mm dia as prrotection pipe for GI wire connected main controll board / test point and provided with GI pipe of light grade 20 mm bore for watering and including funnel,wire mesh PCC chamber of 1;3;6 type C1 ,and RCC cover of 1;2;4 type B1 including necessary earth work in any type of soil /strata disposal of soil all as directed and shown in electrical plate No. 3 of SSR part -1 including testing on completion.

Taking down old stop valve,stop cock,bib cock from existing position including all fittings all as specified and as directed.

Supply & fix stop valve (angle type) cast copper alloy high pressure,screwed for 15mm dia CP fancy type (Half turn) complete all as specified and directed . Make: CERA cat part No. F2004351& F4050502 or Jaquar cat part No.FUS-29083K or any other equivalent make mentioned in list of manufactures.

Supply & fix of bib cock long body chromium plated with flange and aerator CP fancy type of size 15mm complete all as specified and directed .Make: Legrand cat part No. F2004152 or Jaquar cat part No.FUS 29037 or any other equivalent make mentioned in list of manufactures.

S&F on wall / ceiling (concealed) CPVC pipe 32mm dia SDR 11 & plain SDR 11 fittings.

S&F on wall / ceiling (concealed) CPVC pipe 25 mm dia SDR 11 & plain SDR 11 fittings complete all as specified and directed .Make:- Supreme/Finolex/Astral or any other equivalent make mentioned in list of manufactures.

S&F on wall / ceiling (concealed) CPVC pipe 20mm dia SDR 11 & plain SDR 11 fittings complete all as specified and directed . Make:- Supreme/Finolex/Astral or any other equivalent make mentioned in list of manufactures.

Taking down old unserviceable GI tubing of size 32mm complete all as specified and directed

Taking down old unserviceable GI tubing of size 25mm complete all as specified and directed

Taking down old unserviceable GI tubing of size 20mm complete all as specified and directed

Suprisons

M.J.JOY AND COMPANY

M/s ANTONY THOMAS AND CO

SUKU CONSTRUCTIONS

WELTRONENGINEERINGSERVICES