Fabricating, Erecting and Painting 05 nos. 17.0 Mtrs. High New M.S. Storm Warning Signal Masts at Port Mandwa, Rewas, Revdanda, Murud and Rajpuri, Dist-Raigad and Providing storm warning signals for Day and Night with nylon rope.

Amount

Fabricating, Erecting and Painting 05 nos. 17.0 Mtrs. High New M.S. Storm Warning Signal Masts at Port Mandwa, Rewas, Revdanda, Murud and Rajpuri, Dist – Raigad and Providing Storm Warning Signals for Day and Night with nylon rope as per details given below :-

First piece of M.S. Mast is to be fabricated from seamless pipe of 180mm OD X 8.0mm X 6.0 Mtrs. Base plate of 600mm X 600mm X 25mm with 4 nos. gusset brackets of size 300mm X 225mm X 10mm to be fitted & welded at one end of the pipe.MS round bar of 32mm dia X 300mm X 4 nos. are to be fitted & welded to this pipe at a distance of 500mm from baseplate. MS flange of 14" dia X25mm with 8 nos. holes drilled in PCD suitable for 20mm dia bolts to be fitted & welded at other end of the pipe with necessary gusset support. 1 no. doubler MS plate of size 600mm X 560mm X 10mm to be fitted & welded in such a way that the centre of this doubler should be at a distance of 2.100 mtrs. from the baseplate. Neat & strong welding to be ensured. Charges includes cost of material, fabrication & labour charges with lift- lead etc. complete.

Second piece of mast to be fabricated from M.S. seamless pipe of 152.40mm OD X 8.0mm X 6.0 Mtrs. MS flange of 14" dia X25mm with 8 nos. holes drilled in PCD suitable for 20mm dia bolts to be fitted & welded at a distance of 450mm from the end of the pipe with necessary gusset support. At the other end of the pipe MS flange of 12" dia X 25mm with 8 nos. holes drilled in PCD suitable for 20mm dia bolts to be fitted & welded with necessary gusset support. 4 nos. MS lugs of 200 mm X 150mm X 20mm with 40mm dis hole are to be fitted & welded for connecting wire ropes. Neat & strong welding to be ensured. Charges includes cost of material, fabrication & labour charges with lift- lead etc. complete.

Top section of the mast is to be fabricated from M.S. seamless pipe of 130mm OD X 8.0mm X 5.0 Mtrs. MS flange of 12" dia X25mm with 8 nos. holes drilled in PCD suitable for 20mm dia bolts to be fitted & welded at a distance of 450mm from one end of the pipe with necessary gusset support. The other end of pipe to be closed by welding M.S. plate of dia 130mm X 10mm. 02 nos. MS lugs are to be fitted & welded in required angle to support yardarm with flat bar on both side. At top necessary M.S. bracket is to be welded for fixing yardarm. Neat & strong welding to be ensured. Charges includes cost of material, fabrication & labour charges with lift- lead etc. complete.

Necessary M.S. steps are to be fabricated from 28mm dia M.S. round bar bending in “U” shape and to be welded to these three pipes strongly. First step to be welded at a distance of 2.500 mtrs. From the baseplate. 1 no. MS cleat to be fabricated from 28mm dia MS round bar as per required shape and to be fitted & welded to the first piece of the pipes for tying nylon rope. Neat & strong welding to be ensured. Providing 16 nos. H.T. SS bolts of 20mm X 4” with nut, check nut & washer for joining pipes by flanges with each other. Charges includes cost of material, fabrication & labour charges with lift- lead etc. complete.

Fabricating one set of 4 nos. stay rods from 40mm dia MS round bar of 1.20 mtrs. length. The MS plate of size 250mm X 160mm X 20mm is to be welded to the both ends of the round bar. Two nos. holes of 28mm dia to be drilled on one side of the plate for connecting base plate to it with the help of pin. Neat & strong welding to be ensured. Charges includes cost of material, fabrication & labour charges with lift- lead etc. complete.

Providing MS plate of size 600mm X 600mm X 10mm with slot at the centre of the plate of size 270mm length X 25mm width. Fabricating pin of size 40mm dia X 200mm length for connecting plate to stay rods. Charges includes cost of material, fabrication & labour charges with lift- lead etc. complete.

Fabrication of Yardarm: - Fabricating new MS yardarm of 3000mm X 10mm thick MS plate in such a shape that centre of this yardarm is 200mm & reducing on either side to nearly 105mm at both the ends. Gradual slope is to be maintained. MS flat bar of 25mm X 8mm to be fitted & welded on the periphery of the yardarm to avid bending. MS plate of 450mm X200mm X 10mm to be fitted & welded at the centre of the yardarm as double plate for fixing of yardarm to the top pipe with the help of MS brackets, nuts & bolts. 4 nos. MS lugs of ar to be welded on either side of the yardarm for fixing pulley to it. Two lugs with drilled holes to be provided & welded at the both ends of the yardarm in required angle for fixing yardarm supporting flat bar of size 50mm X 8mm with a hole suitable for 12mm dia bolts at both ends of the flat bar. Charges includes cost of material, fabrication & labour charges with lift- lead etc. complete.

Providing set of 2 nos. 6" dia C.I. single sleeve pulley with G.I. shackle & fixing to the yardarm as per requirement. Charges includes cost of material & Labour charges. After completion of fabrication work, entire mast with yardarm required to be painted with one coat of primer paint.

Excavating for concreting the first piece of the mast in the ground. The size of foundation is of 1.200 mtr X 1.200 mtr X 1.800 mtr deep. Charges includes cost of 1:2:4 concreting, cost of material and labour charges with lift-leads etc. complete. Also excavating for concreting stay rods in ground of size 900mm X 900mm X 900mm deep at a suitable distance from storm warning signal mast on the ground. The size of the cement concrete foundation is 900mm X 900mm X 300 height. Good quality of plaster is to be done on concrete of the platform. Charges includes cost of material, fabrication & labour charges with lift- lead etc. complete.

Erecting the Storm Warning Mast with total three pieces, yardarm with brackets & cross support, stay wire ropes with bottle screws, shackle & bull dog grips. Joining flanges` with nut bolts & washers. Tightening all wire ropes in line with stay rods. After completion of erection of mast complete mast is to be painted with one coat of primer paint & two coats of silver paint. Also greasing all bottle screws, shackles, bulldog grips, nut bolts & wire ropes. Charges includes cost of material, fabrication & labour charges with lift- lead etc. complete.

Fabricating & providing Storm Warning Signals for daytime as follows :-

Fabricating rectangular shape storm warning signal of size 1200mm X 600mm from 16 gauge G.I. sheet. MS flat bar of 25mm X 6.0mm to be fitted at the centre of rectangle with 4nos. SS rings fitted at the end of flat bar on all leading edges. All leading edges are to be moulded inserting 4.0mm dia MS round bar. 1/2" dia holes for passing air are to be drilled. After complete fabrication of storm warning signal, it is to be painted with one coat of primer paint & one coat of black paint. Charges includes cost of material, fabrication, painting & labour charges with lift-leads etc. complete.

Fabricating “triangular” shape storm warning signal of size 1250 mm X 1525 mm from 16 gauge G.I. sheet. MS flat bar of 25m X 6.0mm to be fitted at the centre with 2nos. SS rings fitted at the end of flat bar. All leading edges are to be moulded inserting 4.0mm dia MS round bar. 1/2" dia holes for passing air are to be drilled. After complete fabrication of storm warning signal, it is to be painted with one coat of primer paint & one coat of black paint. Charges includes cost of material , fabrication, painting & labour charges with lift-leads etc.

Fabricating “quadrangular” shape storm warning signal of size 1525mm height X 750mm width at centre from 16 gauge G.I. sheet. MS flat bar of 25m X 6.0mm to be fitted height wise at the centre with 2nos. SS rings fitted at both the end of flat bar. All leading edges are to be moulded inserting 4.0mm dia MS round bar. 1/2" dia holes for passing air are to be drilled. After complete fabrication of storm warning signal, it is to be painted with one coat of primer paint & one coat of black paint. Charges includes cost of material, fabrication, painting & labour charges with lift-leads etc.

Fabricating storm warning signal in “Damroo” shape of size 1525mm height X 750mm width at both ends & 50mm width at the centre from 16 gauge G.I. sheet. MS flat bar of 25m X 6.0mm to be fitted height wise at the centre with 2nos. SS rings fitted at both the end of flat bar. All leading edges are to be moulded inserting 4.0mm dia MS round bar. 1/2" dia holes for passing air are to be drilled. After complete fabrication of storm warning signal, it is to be painted with one coat of primer paint & one coat of black paint. Charges includes cost of material , fabrication, painting & labour charges with lift-leads etc.

Providing & fitting following material for fitment of Night time Storm Warning Signals :-

Providing & fitting set of Water Proof FRP body Marine light of 12V, 60W (03 nos. White & 03 nos. Red).

Providing & fitting 25.0 Mtrs. X 12 core, 2.5 Sq MM Branded Flexible Cable

Providing & fitting Water Proof Panel Board of 12” x 18” x 8”

Providing & fitting Solar Panel of 12V, 150W (ISI Mark).

Providing & fitting Water Proof Flood light of 12V, 100W.

Providing & fitting Water Proof Over Charging Regulator.

Proving & fitting Branded New Battery of 12V, 150 Amp.

Providing & fitting Water Proof Change Over Switch of 12V, 32Amp.

Providing & fitting Water Proof 12V, 25 Amp MCB.

Providing & fitting set of 06 nos. Water Proof 12V, 15 Amp MCB.

Providing & fitting set of 06 nos. Water Proof Male - Female Sockets

Fabricating & fitting set of MS brackets, frames and clamps of required size and shape for fitment of marine lights, solar panel, panel board, clamping flexible cable. Charges includes cost of material, fabrication, consumables and labour with lift – leads complete.

Transporting all material to the site including hiring of hydra crane and labour charges with lift-leads etc. for fitting storm warning signal marine lights as per required sequence, solar panel, panel board, flood light, battery MCB etc. with SS nut-bolts including complete wiring. On completion of work satisfactory trials to be given

Providing bundle of 10 Kgs. x 1" dia nylon rope for hoisting storm warning signals during day time..

Removing existing old broken & damaged M.S. storm warning signal mast of Port Revdanda, Murud and Rajpuri by cropping including supporting wire ropes, stays, bottle screws etc. Shifting & stacking up the scrap material to a suitable place near Port office. Charges includes cost of material, fabrication & labour charges with lift-leads etc complete.

Removing existing old broken & damaged PTRCC storm warning signal mast of Port Rewas by cropping including supporting wire ropes, stays, bottle screws etc. Shifting & stacking up the scrap material to a suitable place near Port office. Charges includes cost of material, fabrication & labour charges with lift-leads etc complete.

Mahesh Hingase

Jai Ganesh Enterprises